about summary refs log tree commit diff
path: root/sysdeps/x86_64
Commit message (Collapse)AuthorAgeFilesLines
* Use floor functions not __floor functions in glibc libm.Joseph Myers2018-09-143-24/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to the changes that were made to call sqrt functions directly in glibc, instead of __ieee754_sqrt variants, so that the compiler could inline them automatically without needing special inline definitions in lots of math_private.h headers, this patch makes libm code call floor functions directly instead of __floor variants, removing the inlines / macros for x86_64 (SSE4.1) and powerpc (POWER5). The redirection used to ensure that __ieee754_sqrt does still get called when the compiler doesn't inline a built-in function expansion is refactored so it can be applied to other functions; the refactoring is arranged so it's not limited to unary functions either (it would be reasonable to use this mechanism for copysign - removing the inline in math_private_calls.h but also eliminating unnecessary local PLT entry use in the cases (powerpc soft-float and e500v1, for IBM long double) where copysign calls don't get inlined). The point of this change is that more architectures can get floor calls inlined where they weren't previously (AArch64, for example), without needing special inline definitions in their math_private.h, and existing such definitions in math_private.h headers can be removed. Note that it's possible that in some cases an inline may be used where an IFUNC call was previously used - this is the case on x86_64, for example. I think the direct calls to floor are still appropriate; if there's any significant performance cost from inline SSE2 floor instead of an IFUNC call ending up with SSE4.1 floor, that indicates that either the function should be doing something else that's faster than using floor at all, or it should itself have IFUNC variants, or that the compiler choice of inlining for generic tuning should change to allow for the possibility that, by not inlining, an SSE4.1 IFUNC might be called at runtime - but not that glibc should avoid calling floor internally. (After all, all the same considerations would apply to any user program calling floor, where it might either be inlined or left as an out-of-line call allowing for a possible IFUNC.) Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT): New macro. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_LDBL): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_F128): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_UNARY_ARGS): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (sqrt): Redirect using MATH_REDIRECT. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (floor): Likewise. * sysdeps/aarch64/fpu/s_floor.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_floorf.c: Likewise. * sysdeps/ieee754/dbl-64/s_floor.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Likewise. * sysdeps/ieee754/float128/s_floorf128.c: Likewise. * sysdeps/ieee754/flt-32/s_floorf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_floorl.c: Likewise. * sysdeps/m68k/m680x0/fpu/s_floor_template.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_floor.c: Likewise. * sysdeps/riscv/rvf/s_floorf.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__floor): Remove macro. [_ARCH_PWR5X] (__floorf): Likewise. * sysdeps/x86_64/fpu/math_private.h [__SSE4_1__] (__floor): Remove inline function. [__SSE4_1__] (__floorf): Likewise. * math/w_lgamma_main.c (LGFUNC (__lgamma)): Use floor functions instead of __floor variants. * math/w_lgamma_r_compat.c (__lgamma_r): Likewise. * math/w_lgammaf_main.c (LGFUNC (__lgammaf)): Likewise. * math/w_lgammaf_r_compat.c (__lgammaf_r): Likewise. * math/w_lgammal_main.c (LGFUNC (__lgammal)): Likewise. * math/w_lgammal_r_compat.c (__lgammal_r): Likewise. * math/w_tgamma_compat.c (__tgamma): Likewise. * math/w_tgamma_template.c (M_DECL_FUNC (__tgamma)): Likewise. * math/w_tgammaf_compat.c (__tgammaf): Likewise. * math/w_tgammal_compat.c (__tgammal): Likewise. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (sin_pi): Likewise. * sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (sin_pif): Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. * sysdeps/ieee754/ldbl-96/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c (__modf): Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c (__modff): Likewise.
* Remove x86_64 math_private.h asms.Joseph Myers2018-09-111-44/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The x86_64 math_private.h has asm versions of the macros to reinterpret between floating-point and integer types. This is the sort of thing we now strongly discourage; the expectation in such cases, where the generic C code gives the compiler all the information needed about the required semantics, is that you should get the compiler to do the right thing for the generic C code rather than writing an asm version. Trivial tests showed GCC generates the expected single instructions for reinterpretation from floating point to integer. In the other direction, it goes via memory when the asms don't; I asked about this in GCC bug 87236 and was advised this was deliberate for generic tuning because it was faster that way on some AMD processors (but -mtune=intel, and -Os with the latest GCC, avoid going via memory). The asms don't and can't know about those tuning details, so that's evidence that they are actually making the code worse. This patch removes the asms accordingly. Tested for x86_64. * sysdeps/x86_64/fpu/math_private.h (MOVD): Remove macro. (MOVQ): Likewise. (EXTRACT_WORDS64): Likewise. (INSERT_WORDS64): Likewise. (GET_FLOAT_WORD): Likewise. (SET_FLOAT_WORD): Likewise.
* Add new exp and exp2 implementationsSzabolcs Nagy2018-09-051-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimized exp and exp2 implementations using a lookup table for fractional powers of 2. There are several variants, see e_exp_data.c, they can be selected by modifying math_config.h allowing different tradeoffs. The default selection should be acceptable as generic libm code. Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on aarch64 the rodata size is 2160 bytes, shared between exp and exp2. On aarch64 .text + .rodata size decreased by 24912 bytes. The non-nearest rounding error is less than 1 ULP even on targets without efficient round implementation (although the error rate is higher in that case). Targets with single instruction, rounding mode independent, to nearest integer rounding and conversion can use them by setting TOINT_INTRINSICS and adding the necessary code to their math_private.h. The __exp1 code uses the same algorithm, so the error bound of pow increased a bit. New double precision error handling code was added following the style of the single precision error handling code. Improvements on Cortex-A72 compared to current glibc master: exp thruput: 1.61x in [-9.9 9.9] exp latency: 1.53x in [-9.9 9.9] exp thruput: 1.13x in [0.5 1] exp latency: 1.30x in [0.5 1] exp2 thruput: 2.03x in [-9.9 9.9] exp2 latency: 1.64x in [-9.9 9.9] For small (< 1) inputs the current exp code uses a separate algorithm so the speed up there is less. Was tested on aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets, only non-nearest rounding ulp errors increase and they are within acceptable bounds (ulp updates are in separate patches). * NEWS: Mention exp and exp2 improvements. * math/Makefile (libm-support): Remove t_exp. (type-double-routines): Add math_err and e_exp_data. * sysdeps/aarch64/libm-test-ulps: Update. * sysdeps/arm/libm-test-ulps: Update. * sysdeps/i386/fpu/e_exp_data.c: New file. * sysdeps/i386/fpu/math_err.c: New file. * sysdeps/i386/fpu/t_exp.c: Remove. * sysdeps/ia64/fpu/e_exp_data.c: New file. * sysdeps/ia64/fpu/math_err.c: New file. * sysdeps/ia64/fpu/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/e_exp.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp_data.c: New file. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound. * sysdeps/ieee754/dbl-64/eexp.tbl: Remove. * sysdeps/ieee754/dbl-64/math_config.h: New file. * sysdeps/ieee754/dbl-64/math_err.c: New file. * sysdeps/ieee754/dbl-64/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/t_exp2.h: Remove. * sysdeps/ieee754/dbl-64/uexp.h: Remove. * sysdeps/ieee754/dbl-64/uexp.tbl: Remove. * sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_err.c: New file. * sysdeps/m68k/m680x0/fpu/t_exp.c: Remove. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* [BZ #20271] Add newlines in __libc_fatal calls.Paul Pluzhnikov2018-08-311-1/+1
|
* Split fenv_private.h out of math_private.h more consistently.Joseph Myers2018-08-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some architectures, the parts of math_private.h relating to the floating-point environment are in a separate file fenv_private.h included from math_private.h. As this is purely an architecture-specific convention used by several architectures, however, all such architectures still need their own math_private.h, even if it has nothing to do beyond #include <fenv_private.h> and peculiarity of including the i386 file directly instead of having a shared file in sysdeps/x86. This patch makes the fenv_private.h name an architecture-independent convention in glibc. The include of fenv_private.h from math_private.h becomes architecture-independent (until callers are updated to include fenv_private.h directly so the include from math_private.h is no longer needed). Some architecture math_private.h headers are removed if no longer needed, or renamed to fenv_private.h if all they define belongs in that header; architecture fenv_private.h headers now do require #include_next <fenv_private.h>. The i386 fenv_private.h file moves to sysdeps/x86/fpu/ to reflect how it is actually shared with x86_64. The generic math_private.h gets a new include of <stdbool.h>, as needed for bool in some prototypes in that header (previously that was indirectly included via include/fenv.h, which now only gets included too late in math_private.h, after those prototypes). Tested for x86_64 and x86, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/aarch64/fpu/fenv_private.h: New file. Based on .... * sysdeps/aarch64/fpu/math_private.h: ... this file. All contents moved to fenv_private.h except for ... (TOINT_INTRINSICS): Kept in math_private.h. (roundtoint): Likewise. (converttoint): Likewise. * sysdeps/arm/fenv_private.h: Change multiple-include guard to [ARM_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/arm/math_private.h: Remove. * sysdeps/generic/fenv_private.h: New file. Contents moved from .... * sysdeps/generic/math_private.h: ... this file. Include <stdbool.h>. Do not include <fenv.h> or <get-rounding-mode.h>. Include <fenv_private.h>. Remove functions and macros moved to fenv_private.h. * sysdeps/i386/fpu/math_private.h: Remove. * sysdeps/mips/math_private.h: Move to .... * sysdeps/mips/fpu/fenv_private.h: ... here. Change multiple-include guard to [MIPS_FENV_PRIVATE_H]. Remove [__mips_hard_float] conditional. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/fenv_private.h: Change multiple-include guard to [POWERPC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/math_private.h: Do not include <fenv_private.h>. * sysdeps/riscv/rvf/math_private.h: Move to .... * sysdeps/riscv/rvf/fenv_private.h: ... here. Change multiple-include guard to [RISCV_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/fenv_private.h: Change multiple-include guard to [SPARC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/math_private.h: Remove. * sysdeps/i386/fpu/fenv_private.h: Move to .... * sysdeps/x86/fpu/fenv_private.h: ... here. Change multiple-include guard to [X86_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/x86_64/fpu/math_private.h: Do not include <sysdeps/i386/fpu/fenv_private.h>.
* Fix spaces in x86_64 ULP fileWilco Dijkstra2018-08-151-3/+3
| | | | | | | | Fix a few missing spaces, it's now identical to the regenerated version. Passes GLIBC tests on x64. * sysdeps/x86_64/fpu/libm-test-ulps: Regenerate to fix spaces.
* Improve performance of sinf and cosfWilco Dijkstra2018-08-143-2/+44
| | | | | | | | | | | | | | | | | | | | | | | | | The second patch improves performance of sinf and cosf using the same algorithms and polynomials. The returned values are identical to sincosf for the same input. ULP definitions for AArch64 and x64 are updated. sinf/cosf througput gains on Cortex-A72: * |x| < 0x1p-12 : 1.2x * |x| < M_PI_4 : 1.8x * |x| < 2 * M_PI: 1.7x * |x| < 120.0 : 2.3x * |x| < Inf : 3.0x * NEWS: Mention sinf, cosf, sincosf. * sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf. * sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of constants rather than including generic sincosf.h. * sysdeps/x86_64/fpu/s_sincosf_data.c: Remove. * sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove. (reduced_cos): Remove. (sinf_poly): New function. * sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
* Move SNAN_TESTS_* out of math-tests.h.Joseph Myers2018-08-101-0/+34
| | | | | | | | | | | | | | | | | | | | | | | Continuing moving macros out of math-tests.h to smaller headers following typo-proof conventions instead of using #ifndef, this patch moves the SNAN_TESTS_* macros for individual types out to their own sysdeps header (while the type-generic SNAN_TESTS wrapper for those macros remains in math-tests.h). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/generic/math-tests-snan.h: New file. * sysdeps/generic/math-tests.h: Include <math-tests-snan.h>. (SNAN_TESTS_float): Do not define here. (SNAN_TESTS_double): Likewise. (SNAN_TESTS_long_double): Likewise. (SNAN_TESTS_float128): Likewise. * sysdeps/i386/fpu/math-tests-snan.h: New file. * sysdeps/i386/fpu/math-tests.h: Remove file. * sysdeps/ia64/math-tests-snan.h: New file. * sysdeps/ia64/math-tests.h: Remove file. * sysdeps/x86/math-tests.h: Likewise. * sysdeps/x86_64/fpu/math-tests-snan.h: New file.
* Improve performance of sincosfWilco Dijkstra2018-08-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a complete rewrite of sincosf. The new version is significantly faster, as well as simple and accurate. The worst-case ULP is 0.5607, maximum relative error is 0.5303 * 2^-23 over all 4 billion inputs. In non-nearest rounding modes the error is 1ULP. The algorithm uses 3 main cases: small inputs which don't need argument reduction, small inputs which need a simple range reduction and large inputs requiring complex range reduction. The code uses approximate integer comparisons to quickly decide between these cases. The small range reducer uses a single reduction step to handle values up to 120.0. It is fastest on targets which support inlined round instructions. The large range reducer uses integer arithmetic for simplicity. It does a 32x96 bit multiply to compute a 64-bit modulo result. This is more than accurate enough to handle the worst-case cancellation for values close to an integer multiple of PI/4. It could be further optimized, however it is already much faster than necessary. sincosf throughput gains on Cortex-A72: * |x| < 0x1p-12 : 1.6x * |x| < M_PI_4 : 1.7x * |x| < 2 * M_PI: 1.5x * |x| < 120.0 : 1.8x * |x| < Inf : 2.3x * math/Makefile: Add s_sincosf_data.c. * sysdeps/ia64/fpu/s_sincosf_data.c: New file. * sysdeps/ieee754/flt-32/s_sincosf.h (abstop12): Add new function. (sincosf_poly): Likewise. (reduce_small): Likewise. (reduce_large): Likewise. * sysdeps/ieee754/flt-32/s_sincosf.c (sincosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf_data.c: New file with sincosf data. * sysdeps/m68k/m680x0/fpu/s_sincosf_data.c: New file. * sysdeps/x86_64/fpu/s_sincosf_data.c: New file.
* Move __fentry__ version definition to sysdeps/{i386,x86_64}Ilya Leoshkevich2018-08-101-0/+3
| | | | | | | | | | | | | | __fentry__ symbol is currently not defined for other architectures. Attempts to introduce it cause abicheck to fail, because it will be available since 2.29 earliest, and not 2.13, which is the case for Intel. With the new code, abicheck passes for i686-linux-gnu, x86_64-linux-gnu and x86_64-linux-gnu32 triples. ChangeLog: * stdlib/Versions: Remove __fentry__. * sysdeps/i386/Versions: Add __fentry__. * sysdeps/x86_64/Versions: Add __fentry__.
* x86: Move STATE_SAVE_OFFSET/STATE_SAVE_MASK to sysdep.hH.J. Lu2018-08-061-1/+1
| | | | | | | | | | | | | Move STATE_SAVE_OFFSET and STATE_SAVE_MASK to sysdep.h to make sysdeps/x86/cpu-features.h a C header file. * sysdeps/x86/cpu-features.h (STATE_SAVE_OFFSET): Removed. (STATE_SAVE_MASK): Likewise. Don't check __ASSEMBLER__ to include <cpu-features-offsets.h>. * sysdeps/x86/sysdep.h (STATE_SAVE_OFFSET): New. (STATE_SAVE_MASK): Likewise. * sysdeps/x86_64/dl-trampoline.S: Include <cpu-features-offsets.h> instead of <cpu-features.h>.
* x86: Don't include <init-arch.h> in assembly codesH.J. Lu2018-08-033-3/+0
| | | | | | | | | | | | There is no need to include <init-arch.h> in assembly codes since all x86 IFUNC selector functions are written in C. Tested on i686 and x86-64. There is no code change in libc.so, ld.so and libmvec.so. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Don't include <init-arch.h>. * sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core-avx2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* Rename the glibc.tune namespace to glibc.cpuSiddhesh Poyarekar2018-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc.tune namespace is vaguely named since it is a 'tunable', so give it a more specific name that describes what it refers to. Rename the tunable namespace to 'cpu' to more accurately reflect what it encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since glibc.cpu.cpu is weird. * NEWS: Mention the change. * elf/dl-tunables.list: Rename tune namespace to cpu. * sysdeps/powerpc/dl-tunables.list: Likewise. * sysdeps/x86/dl-tunables.list: Likewise. * sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to cpu.name. * elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust. * elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise. * manual/README.tunables: Likewise. * manual/tunables.texi: Likewise. * sysdeps/powerpc/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86_64/Makefile: Likewise. * sysdeps/x86/dl-cet.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86: Rename __glibc_reserved2 to ssp_base in tcbhead_tH.J. Lu2018-07-252-1/+10
| | | | | | | | | | | | | | | This will be used to record the current shadow stack base for shadow stack switching by getcontext, makecontext, setcontext and swapcontext. If the target shadow stack base is the same as the current shadow stack base, we unwind the shadow stack. Otherwise it is a stack switch and we look for a restore token to restore the target shadow stack. * sysdeps/i386/nptl/tcb-offsets.sym (SSP_BASE_OFFSET): New. * sysdeps/i386/nptl/tls.h (tcbhead_t): Replace __glibc_reserved2 with ssp_base. * sysdeps/x86_64/nptl/tcb-offsets.sym (SSP_BASE_OFFSET): New. * sysdeps/x86_64/nptl/tls.h (tcbhead_t): Replace __glibc_reserved2 with ssp_base.
* x86-64: Add endbr64 to tst-quadmod[12].SH.J. Lu2018-07-242-0/+12
| | | | | | | | | | | | | Add endbr64 to tst-quadmod1.S and tst-quadmod2.S so that func and foo can be called indirectly. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/x86_64/tst-quadmod1.S (func): Add endbr64 if IBT is enabled. (foo): Likewise. * sysdeps/x86_64/tst-quadmod2.S (func) : Likewise. (foo): Likewise.
* x86-64: Use _CET_NOTRACK in memcmp-sse4.SH.J. Lu2018-07-181-1/+1
| | | | | * sysdeps/x86_64/multiarch/memcmp-sse4.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* x86-64: Use _CET_NOTRACK in memcpy-ssse3.SH.J. Lu2018-07-181-62/+62
| | | | | | | * sysdeps/x86_64/multiarch/memcpy-ssse3.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table. (MEMCPY): Likewise.
* x86-64: Use _CET_NOTRACK in memcpy-ssse3-back.SH.J. Lu2018-07-181-3/+3
| | | | | | | * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table. (MEMCPY): Likewise.
* x86-64: Use _CET_NOTRACK in strcmp-sse42.SH.J. Lu2018-07-181-1/+1
| | | | | * sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add _CET_NOTRACK before indirect jump to jump table.
* x86-64: Use _CET_NOTRACK in strcpy-sse2-unaligned.SH.J. Lu2018-07-181-1/+1
| | | | | | * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* x86_64: Use _CET_NOTRACK in strcmp.SH.J. Lu2018-07-181-1/+1
| | | | | * sysdeps/x86_64/strcmp.S (STRCMP): Add _CET_NOTRACK before indirect jump to jump table.
* x86-64: Add _CET_ENDBR to STRCMP_SSE42H.J. Lu2018-07-171-0/+1
| | | | | | | | | | Add _CET_ENDBR to STRCMP_SSE42, which is called indirectly, to support IBT. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add _CET_ENDBR.
* x86: Add _CET_ENDBR to functions in dl-tlsdesc.SH.J. Lu2018-07-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | Add _CET_ENDBR to functions in dl-tlsdesc.S, which are called indirectly, to support IBT. Tested on i686 and x86-64. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_return): Add _CET_ENDBR. (_dl_tlsdesc_undefweak): Likewise. (_dl_tlsdesc_dynamic): Likewise. (_dl_tlsdesc_resolve_abs_plus_addend): Likewise. (_dl_tlsdesc_resolve_rel): Likewise. (_dl_tlsdesc_resolve_rela): Likewise. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_return): Likewise. (_dl_tlsdesc_undefweak): Likewise. (_dl_tlsdesc_dynamic): Likewise. (_dl_tlsdesc_resolve_rela): Likewise. (_dl_tlsdesc_resolve_hold): Likewise.
* x86: Add _CET_ENDBR to functions in crti.SH.J. Lu2018-07-171-0/+2
| | | | | | | | | | | | | | Add _CET_ENDBR to functions in crti.S, which are called indirectly, to support IBT. Tested on i686 and x86-64. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/crti.S (_init): Add _CET_ENDBR. (_fini): Likewise. * sysdeps/x86_64/crti.S (_init): Likewise. (_fini): Likewise.
* x86: Support IBT and SHSTK in Intel CET [BZ #21598]H.J. Lu2018-07-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
* x86: Support shadow stack pointer in setjmp/longjmpH.J. Lu2018-07-142-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save and restore shadow stack pointer in setjmp and longjmp to support shadow stack in Intel CET. Use feature_1 in tcbhead_t to check if shadow stack is enabled before saving and restoring shadow stack pointer. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>. (_setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>. (setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers): Remove jmp_buf-ssp.sym. * sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/x86/Makefile (gen-as-const-headers): Add jmp_buf-ssp.sym. * sysdeps/x86/jmp_buf-ssp.sym: New dummy file. * sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* x86: Rename __glibc_reserved1 to feature_1 in tcbhead_t [BZ #22563]H.J. Lu2018-07-142-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | feature_1 has X86_FEATURE_1_IBT and X86_FEATURE_1_SHSTK bits for CET run-time control. CET_ENABLED, IBT_ENABLED and SHSTK_ENABLED are defined to 1 or 0 to indicate that if CET, IBT and SHSTK are enabled. <tls-setup.h> is added to set up thread-local data. Reviewed-by: Carlos O'Donell <carlos@redhat.com> [BZ #22563] * nptl/pthread_create.c: Include <tls-setup.h>. (__pthread_create_2_1): Call tls_setup_tcbhead. * sysdeps/generic/tls-setup.h: New file. * sysdeps/x86/nptl/tls-setup.h: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New. * sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): Likewise. * sysdeps/i386/nptl/tls.h (tcbhead_t): Rename __glibc_reserved1 to feature_1. * sysdeps/x86_64/nptl/tls.h (tcbhead_t): Likewise. * sysdeps/x86/sysdep.h (X86_FEATURE_1_IBT): New. (X86_FEATURE_1_SHSTK): Likewise. (CET_ENABLED): Likewise. (IBT_ENABLED): Likewise. (SHSTK_ENABLED): Likewise.
* i386: Change offset of __private_ss to 0x30 [BZ #23250]H.J. Lu2018-06-121-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/i386/nptl/tls.h has typedef struct { void *tcb; /* Pointer to the TCB. Not necessarily the thread descriptor used by libpthread. */ dtv_t *dtv; void *self; /* Pointer to the thread descriptor. */ int multiple_threads; uintptr_t sysinfo; uintptr_t stack_guard; uintptr_t pointer_guard; int gscope_flag; int __glibc_reserved1; /* Reservation of some values for the TM ABI. */ void *__private_tm[4]; /* GCC split stack support. */ void *__private_ss; } tcbhead_t; The offset of __private_ss is 0x34. But GCC defines /* We steal the last transactional memory word. */ #define TARGET_THREAD_SPLIT_STACK_OFFSET 0x30 and libgcc/config/i386/morestack.S has cmpl %gs:0x30,%eax # See if we have enough space. movl %eax,%gs:0x30 # Save the new stack boundary. movl %eax,%gs:0x30 # Save the new stack boundary. movl %ecx,%gs:0x30 # Save new stack boundary. movl %eax,%gs:0x30 movl %gs:0x30,%eax movl %eax,%gs:0x30 Since update TARGET_THREAD_SPLIT_STACK_OFFSET changes split stack ABI, this patch updates tcbhead_t to match GCC. [BZ #23250] [BZ #10686] * sysdeps/i386/nptl/tls.h (tcbhead_t): Change __private_tm[4] to _private_tm[3] and add __glibc_reserved2. Add _Static_assert of offset of __private_ss == 0x30. * sysdeps/x86_64/nptl/tls.h: Add _Static_assert of offset of __private_ss == 0x40 for ILP32 and == 0x70 for LP64.
* x86: Make strncmp usable from rtldFlorian Weimer2018-06-121-4/+7
| | | | | | | | | Due to the way the conditions were written, the rtld build of strncmp ended up with no definition of the strncmp symbol at all: The implementations were renamed for use within an IFUNC resolver, but the IFUNC resolver itself was missing (because rtld does not use IFUNCs). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Mark _init and _fini as hidden [BZ #23145]H.J. Lu2018-06-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _init and _fini are special functions provided by glibc for linker to define DT_INIT and DT_FINI in executable and shared library. They should never be put in dynamic symbol table. This patch marks them as hidden to remove them from dynamic symbol table. Tested with build-many-glibcs.py. [BZ #23145] * elf/Makefile (tests-special): Add $(objpfx)check-initfini.out. ($(all-built-dso:=.dynsym): New target. (common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym). ($(objpfx)check-initfini.out): New target. (generated): Add check-initfini.out. * scripts/check-initfini.awk: New file. * sysdeps/aarch64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/alpha/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/arm/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/hppa/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/i386/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/ia64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/m68k/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/microblaze/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/nios2/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/s390/s390-32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/s390/s390-64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/sh/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/sparc/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/x86_64/crti.S (_init): Mark as hidden. (_fini): Likewise.
* x86-64: Optimize strcmp/wcscmp and strncmp/wcsncmp with AVX2Leonardo Sandoval2018-06-0113-2/+1008
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimize x86-64 strcmp/wcscmp and strncmp/wcsncmp with AVX2. It uses vector comparison as much as possible. Peak performance observed on a SkyLake machine: 9x, 3x, 2.5x and 5.5x for strcmp, strncmp, wcscmp and wcsncmp, respectively. The larger the comparison length, the more benefit using avx2 functions, except on the strcmp, where peak is observed at length == 32 bytes. Select AVX2 strcmp/wcscmp on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcmp-avx2, strncmp-avx2, wcscmp-avx2, wcscmp-sse2, wcsncmp-avx2 and wcsncmp-sse2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __strcmp_avx2, __strncmp_avx2, __wcscmp_avx2, __wcsncmp_avx2, __wcscmp_sse2 and __wcsncmp_sse2. * sysdeps/x86_64/multiarch/strcmp.c (OPTIMIZE (avx2)): (IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX 2 machines if AVX unaligned load is fast and vzeroupper is preferred. * sysdeps/x86_64/multiarch/strncmp.c: Likewise. * sysdeps/x86_64/multiarch/strcmp-avx2.S: New file. * sysdeps/x86_64/multiarch/strncmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp.c: Likewise. * sysdeps/x86_64/multiarch/wcsncmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcsncmp-sse2.c: Likewise. * sysdeps/x86_64/multiarch/wcsncmp.c: Likewise. * sysdeps/x86_64/wcscmp.S (__wcscmp): Add alias only if __wcscmp is undefined.
* Update ulps with "make regen-ulps" on AMD Ryzen 7 1800X.Paul Pluzhnikov2018-05-301-1/+1
| | | | | | | 2018-05-30 Paul Pluzhnikov <ppluzhnikov@google.com> * sysdeps/x86_64/fpu/libm-test-ulps (log_vlen8_avx2): Update for AMD Ryzen 7 1800X.
* x86-64: Skip zero length in __mem[pcpy|move|set]_ermsH.J. Lu2018-05-232-0/+11
| | | | | | | | | | | | | This patch skips zero length in __mempcpy_erms, __memmove_erms and __memset_erms. Tested on x86-64. * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S (__mempcpy_erms): Skip zero length. (__memmove_erms): Likewise. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (__memset_erms): Likewise.
* Don't write beyond destination in __mempcpy_avx512_no_vzeroupper (bug 23196)Andreas Schwab2018-05-231-2/+3
| | | | | When compiled as mempcpy, the return value is the end of the destination buffer, thus it cannot be used to refer to the start of it.
* x86-64: Check Prefer_FSRM in ifunc-memmove.hH.J. Lu2018-05-211-1/+2
| | | | | | | | | | | | | Although the REP MOVSB implementations of memmove, memcpy and mempcpy aren't used by the current processors, this patch adds Prefer_FSRM check in ifunc-memmove.h so that they can be used in the future. * sysdeps/x86/cpu-features.h (bit_arch_Prefer_FSRM): New. (index_arch_Prefer_FSRM): Likewise. * sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)): Also check Prefer_FSRM. * sysdeps/x86_64/multiarch/ifunc-memmove.h (IFUNC_SELECTOR): Also return OPTIMIZE (erms) for Prefer_FSRM.
* x86-64: remove duplicate line on PREFETCH_ONE_SET macroLeonardo Sandoval2018-05-171-1/+0
| | | | | | | Tested on 64-bit AVX machine * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S (PREFETCH_ONE_SET): Remove duplicate line
* nptl: Remove __ASSUME_PRIVATE_FUTEXH.J. Lu2018-05-172-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since __ASSUME_PRIVATE_FUTEX is always defined, this patch removes the !__ASSUME_PRIVATE_FUTEX paths. Tested with build-many-glibcs.py. * nptl/allocatestack.c (allocate_stack): Remove the !__ASSUME_PRIVATE_FUTEX paths. * nptl/descr.h (header): Remove the !__ASSUME_PRIVATE_FUTEX path. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * sysdeps/i386/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Removed. * sysdeps/powerpc/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise. * sysdeps/sh/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise. * sysdeps/i386/nptl/tls.h: (tcbhead_t): Remve the !__ASSUME_PRIVATE_FUTEX path. * sysdeps/s390/nptl/tls.h (tcbhead_t): Likewise. * sysdeps/sparc/nptl/tls.h (tcbhead_t): Likewise. * sysdeps/x86_64/nptl/tls.h (tcbhead_t): Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.S: Remove the !__ASSUME_PRIVATE_FUTEX macros. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/cancellation.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_PRIVATE_FUTEX): Removed.
* x86-64: Use IFUNC strncat inside libc.soH.J. Lu2018-05-162-2/+6
| | | | | | | | | | | | | Unlike i386, we can call hidden IFUNC functions inside libc.so since x86-64 PLT is always PIC. Tested on x86-64. * sysdeps/x86_64/multiarch/strncat-c.c (STRNCAT_PRIMARY): Removed. Include <string/strncat.c>. * sysdeps/x86_64/multiarch/strncat.c (__strncat): New strong alias. (__GI___strncat): New hidden alias.
* x86: Add sysdeps/x86/ldsodefs.hH.J. Lu2018-05-141-56/+0
| | | | | | | | | | | | | | | | | Merge sysdeps/i386/ldsodefs.h and sysdeps/x86_64/ldsodefs.h into sysdeps/x86/ldsodefs.h. Tested on i686 and x86-64. * sysdeps/i386/ldsodefs.h: Removed. * sysdeps/x86_64/ldsodefs.h: Moved to ... * sysdeps/x86/ldsodefs.h: This. (La_i86_regs): New. (La_i86_retval): Likewise. (ARCH_PLTENTER_MEMBERS): Add i86_gnu_pltenter. (ARCH_PLTEXIT_MEMBERS): i86_gnu_pltexit. Acked-by: Christian Brauner (Ubuntu) christian@brauner.io
* x86-64: Remove the unnecessary testl in strlen-avx2.SH.J. Lu2018-05-141-1/+0
| | | | | | | | | Since the result of testl is never used, this patch removes it. Tested on 64-bit AVX2 machine. * sysdeps/x86_64/multiarch/strlen-avx2.S (STRLEN): Remove the unnecessary testl.
* x86-64/memset: Mark the debugger symbol as hiddenH.J. Lu2018-05-071-1/+2
| | | | | | | | | When MEMSET_SYMBOL (__memset, erms) is provided for debugger, mark it as hidden so that it will be local to the library. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (MEMSET_SYMBOL (__memset, erms)): Mark the debugger symbol as hidden.
* elf: Unify symbol address run-time calculation [BZ #19818]Maciej W. Rozycki2018-04-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap symbol address run-time calculation into a macro and use it throughout, replacing inline calculations. There are a couple of variants, most of them different in a functionally insignificant way. Most calculations are right following RESOLVE_MAP, at which point either the map or the symbol returned can be checked for validity as the macro sets either both or neither. In some places both the symbol and the map has to be checked however. My initial implementation therefore always checked both, however that resulted in code larger by as much as 0.3%, as many places know from elsewhere that no check is needed. I have decided the size growth was unacceptable. Having looked closer I realized that it's the map that is the culprit. Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional boolean argument telling it to access the map without checking it for validity. This in turn has brought quite nice results, with new code actually being smaller for i686, and MIPS o32, n32 and little-endian n64 targets, unchanged in size for x86-64 and, unusually, marginally larger for big-endian MIPS n64, as follows: i686: text data bss dec hex filename 152255 4052 192 156499 26353 ld-2.27.9000-base.so 152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so MIPS/o32/el: text data bss dec hex filename 142906 4396 260 147562 2406a ld-2.27.9000-base.so 142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so MIPS/n32/el: text data bss dec hex filename 142267 4404 260 146931 23df3 ld-2.27.9000-base.so 142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so MIPS/n64/el: text data bss dec hex filename 149835 7376 408 157619 267b3 ld-2.27.9000-base.so 149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so MIPS/o32/eb: text data bss dec hex filename 142870 4396 260 147526 24046 ld-2.27.9000-base.so 142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so MIPS/n32/eb: text data bss dec hex filename 142019 4404 260 146683 23cfb ld-2.27.9000-base.so 141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so MIPS/n64/eb: text data bss dec hex filename 149763 7376 408 157547 2676b ld-2.27.9000-base.so 149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so x86-64: text data bss dec hex filename 148462 6452 400 155314 25eb2 ld-2.27.9000-base.so 148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so [BZ #19818] * sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set' parameter. (SYMBOL_ADDRESS): New macro. [!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use SYMBOL_ADDRESS for symbol address calculation. * elf/dl-runtime.c (_dl_fixup): Likewise. (_dl_profile_fixup): Likewise. * elf/dl-symaddr.c (_dl_symbol_address): Likewise. * elf/rtld.c (dl_main): Likewise. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. (elf_machine_reloc): Likewise. (elf_machine_got_rel): Likewise. * sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* [PATCH 1/7] sin/cos slow paths: avoid slow paths for small inputsWilco Dijkstra2018-04-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This series of patches removes the slow patchs from sin, cos and sincos. Besides greatly simplifying the implementation, the new version is also much faster for inputs up to PI (41% faster) and for large inputs needing range reduction (27% faster). ULP is ~0.55 with no errors found after testing 1.6 billion inputs across most of the range with mpsin and mpcos. The number of incorrectly rounded results (ie. ULP >0.5) is at most ~2750 per million inputs between 0.125 and 0.5, the average is ~850 per million between 0 and PI. Tested on AArch64 and x86_64 with no regressions. The first patch removes the slow paths for the cases where the input is small and doesn't require range reduction. Update ULP tables for sin, cos and sincos on AArch64 and x86_64. * sysdeps/aarch64/libm-test-ulps: Update ULP for sin, cos, sincos. * sysdeps/ieee754/dbl-64/s_sin.c (__sin): Remove slow paths for small inputs. (__cos): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sin, cos, sincos.
* Use x86_64 backtrace as generic version.Joseph Myers2018-03-211-134/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No glibc configuration uses the present debug/backtrace.c, whereas several #include the x86_64 version. The x86_64 version is effectively a generic one (using _Unwind_Backtrace from libgcc, which works much more reliably than the built-in functions used by debug/backtrace.c). This patch moves it to debug/backtrace.c and removes all the #includes of the x86_64 version from other architectures which are no longer required. I do not know whether all the other architecture-specific backtrace implementations that are based on _Unwind_Backtrace are required, or whether, where their differences from the generic version do something useful, suitable hooks could be added to the generic version to reduce the duplication involved. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * sysdeps/x86_64/backtrace.c: Move to .... * debug/backtrace.c: ... here. * sysdeps/aarch64/backtrace.c: Remove file. * sysdeps/alpha/backtrace.c: Likewise. * sysdeps/hppa/backtrace.c: Likewise. * sysdeps/ia64/backtrace.c: Likewise. * sysdeps/mips/backtrace.c: Likewise. * sysdeps/nios2/backtrace.c: Likewise. * sysdeps/riscv/backtrace.c: Likewise. * sysdeps/sh/backtrace.c: Likewise. * sysdeps/tile/backtrace.c: Likewise.
* Remove all target specific __ieee754_sqrt(f/l) inlinesWilco Dijkstra2018-03-151-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now unused target specific__ieee754_sqrt(f/l) inlines. Also remove inlines of sqrt which are for really old GCC versions. Removing these is desirable, under the general principle of leaving such inlining to the compiler rather than trying to do it in installed headers, especially when only very old compilers are affected. Note that removing inlines for __ieee754_sqrt disables inlining in the sqrt wrapper functions. Given the sqrt function will typically only be called for negative arguments, it doesn't matter whether the inlining happens or not. * sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/s390/fpu/bits/mathinline.h: Remove file. * sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove. (sqrtf): Remove. (sqrtl): Remove. (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove. * sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove.
* hurd: add gscope supportSamuel Thibault2018-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* Remove mplog and mpexpWilco Dijkstra2018-02-1510-75/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now unused mplog and mpexp files. * math/Makefile: Remove mpexp.c and mplog.c * sysdeps/i386/fpu/mpexp.c: Delete file. * sysdeps/i386/fpu/mplog.c: Likewise. * sysdeps/ia64/fpu/mpexp.c: Likewise. * sysdeps/ia64/fpu/mplog.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog. * sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function. * sysdeps/ieee754/dbl-64/mpexp.c: Delete file. * sysdeps/ieee754/dbl-64/mplog.c: Likewise. * sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/mplog.c: Likewise. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*. * sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines. * sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file. * sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise.
* Remove slow paths from expSzabolcs Nagy2018-02-127-36/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Remove the __slowexp code, so exp is no longer correctly rounded. The result is computed to about 70 bits precision so the worst case ulp error is about 0.500007 in nearest rounding mode. * manual/probes.texi: Remove slowexp probes. * math/Makefile: Remove slowexp. * sysdeps/generic/math_private.h (__slowexp): Remove. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and document error bounds. * sysdeps/i386/fpu/slowexp.c: Remove. * sysdeps/ia64/fpu/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove. * sysdeps/m68k/m680x0/fpu/slowexp.c: Remove. * sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove.
* Remove slow paths from powWilco Dijkstra2018-02-128-40/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the slow paths from pow. Like several other double precision math functions, pow is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1). The worst case error is ~0.506ULP. A simple test over a few hundred million values shows pow is 10% faster on average. This fixes BZ #13932. [BZ #13932] * sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove. * benchtests/pow-inputs: Update comment for slow path cases. * manual/probes.texi (slowpow_p10): Delete removed probe. (slowpow_p10): Likewise. * math/Makefile: Remove halfulp.c and slowpow.c. * sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1. * sysdeps/generic/math_private.h (__exp1): Remove error argument. (__halfulp): Remove. (__slowpow): Remove. * sysdeps/i386/fpu/halfulp.c: Delete file. * sysdeps/i386/fpu/slowpow.c: Likewise. * sysdeps/ia64/fpu/halfulp.c: Likewise. * sysdeps/ia64/fpu/slowpow.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument, improve comments and add error analysis. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis. (power1): Remove function: (log1): Remove error argument, add error analysis. (my_log2): Remove function. * sysdeps/ieee754/dbl-64/halfulp.c: Delete file. * sysdeps/ieee754/dbl-64/slowpow.c: Likewise. * sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise. * sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c. * sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c, slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise. * sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file. * sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
* x86-64: Use __glibc_likely/__glibc_likely in dl-machine.hH.J. Lu2018-02-051-7/+7
| | | | | | | | | | | | | | | | | | | | The differences in elf/dl-reloc.os are --- before 2018-02-05 03:52:32.803125207 -0800 +++ after 2018-02-05 03:52:14.913711879 -0800 @@ -1129,7 +1129,7 @@ _dl_relocate_object: leaq __PRETTY_FUNCTION__.9767(%rip), %rcx leaq .LC11(%rip), %rsi leaq .LC12(%rip), %rdi - movl $540, %edx + movl $539, %edx call __GI___assert_fail .p2align 4,,10 .p2align 3 * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Replace __builtin_expect with __glibc_likely and __glibc_likely. (elf_machine_lazy_rel): Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-07 18:50:55 +0000