| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
| |
Add Fast Short REP CMP and SCA (FSRCS), Fast Short REP STO (FSRS) and
Fast Zero-Length REP MOV (FZLRM) support to <sys/platform/x86.h>.
|
|
|
|
| |
Add Intel HRESET support to <sys/platform/x86.h>.
|
|
|
|
| |
Add AVX-VNNI support to <sys/platform/x86.h>.
|
|
|
|
| |
Add AVX512_FP16 support to <sys/platform/x86.h>.
|
|
|
|
| |
Add Intel UINTR support to <sys/platform/x86.h>.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The __x86_shared_non_temporal_threshold determines when memcpy on x86
uses non_temporal stores to avoid pushing other data out of the last
level cache.
This patch proposes to revert the calculation change made by H.J. Lu's
patch of June 2, 2017.
H.J. Lu's patch selected a threshold suitable for a single thread
getting maximum performance. It was tuned using the single threaded
large memcpy micro benchmark on an 8 core processor. The last change
changes the threshold from using 3/4 of one thread's share of the
cache to using 3/4 of the entire cache of a multi-threaded system
before switching to non-temporal stores. Multi-threaded systems with
more than a few threads are server-class and typically have many
active threads. If one thread consumes 3/4 of the available cache for
all threads, it will cause other active threads to have data removed
from the cache. Two examples show the range of the effect. John
McCalpin's widely parallel Stream benchmark, which runs in parallel
and fetches data sequentially, saw a 20% slowdown with this patch on
an internal system test of 128 threads. This regression was discovered
when comparing OL8 performance to OL7. An example that compares
normal stores to non-temporal stores may be found at
https://vgatherps.github.io/2018-09-02-nontemporal/. A simple test
shows performance loss of 400 to 500% due to a failure to use
nontemporal stores. These performance losses are most likely to occur
when the system load is heaviest and good performance is critical.
The tunable x86_non_temporal_threshold can be used to override the
default for the knowledgable user who really wants maximum cache
allocation to a single thread in a multi-threaded system.
The manual entry for the tunable has been expanded to provide
more information about its purpose.
modified: sysdeps/x86/cacheinfo.c
modified: manual/tunables.texi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The behavior of isnan/__builtin_isnan on bit patterns that do not
correspond to something that the CPU would produce from valid inputs
is currently under-defined in the toolchain. (The GCC built-in and
glibc disagree.)
The isnan check in PRINTF_FP_FETCH in stdio-common/printf_fp.c
assumes the GCC behavior that returns true for non-normal numbers
which are not specified as NaN. (The glibc implementation returns
false for such numbers.)
At present, passing non-normal numbers to __mpn_extract_long_double
causes this function to produce irregularly shaped multi-precision
integers, triggering undefined behavior in __printf_fp_l.
With GCC 10 and glibc 2.32, this behavior is not visible because
__builtin_isnan is used, which avoids calling
__mpn_extract_long_double in this case. This commit updates the
implementation of __mpn_extract_long_double so that regularly shaped
multi-precision integers are produced in this case, avoiding
undefined behavior in __printf_fp_l.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 04bba1e5d84b6fd8d3a3b006bc240cd5d241ee30
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Aug 5 13:51:56 2020 -0700
x86: Set CPU usable feature bits conservatively [BZ #26552]
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
no longer turns on the usable bits of IBT and SHSTK since we don't know
if IBT and SHSTK are usable until much later. Use HAS_CPU_FEATURE to
check if the processor supports IBT and SHSTK.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add Intel Key Locker:
https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html
support to <sys/platform/x86.h>. Intel Key Locker has
1. KL: AES Key Locker instructions.
2. WIDE_KL: AES wide Key Locker instructions.
3. AESKLE: AES Key Locker instructions are enabled by OS.
Applications should use
if (CPU_FEATURE_USABLE (KL))
and
if (CPU_FEATURE_USABLE (WIDE_KL))
to check if AES Key Locker instructions and AES wide Key Locker
instructions are usable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
|
|
|
|
|
|
| |
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Intel64 and IA-32 Architectures Software Developer’s Manual has changed
the following CPU feature names:
1. The CPU feature of Enhanced Intel SpeedStep Technology is renamed
from EST to EIST.
2. The CPU feature which supports Platform Quality of Service Monitoring
(PQM) capability is changed to Intel Resource Director Technology
(Intel RDT) Monitoring capability, i.e. PQM is renamed to RDT_M.
3. The CPU feature which supports Platform Quality of Service
Enforcement (PQE) capability is changed to Intel Resource Director
Technology (Intel RDT) Allocation capability, i.e. PQE is renamed to
RDT_A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support usable check for all CPU features with the following changes:
1. Change struct cpu_features to
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
so that there is a usable bit for each cpuid bit.
2. After the cpuid bits have been initialized, copy the known bits to the
usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for
CPU feature detection.
3. Clear the usable bits which require OS support.
4. If the feature is supported by OS, copy its cpuid bit to its usable
bit.
5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE
and CPU_FEATURE_USABLE_P to check if a feature is usable.
6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13.
7. Unset MPX feature since it has been deprecated.
The results are
1. If the feature is known and doesn't requre OS support, its usable bit
is copied from the cpuid bit.
2. Otherwise, its usable bit is copied from the cpuid bit only if the
feature is known to supported by OS.
3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the
feature can be used.
4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports
the feature.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since
commit 430388d5dc0e1861b869096f4f5d946d7d74232a
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Aug 3 08:04:49 2018 -0700
x86: Don't include <init-arch.h> in assembly codes
removed all usages of <init-arch.h> from assembly codes, we can remove
__ASSEMBLER__ check in init-arch.h.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since
commit c867597bff2562180a18da4b8dba89d24e8b65c4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jun 8 13:57:50 2016 -0700
X86-64: Remove previous default/SSE2/AVX2 memcpy/memmove
removed the only usage of __x86_prefetchw, we can remove the unused
__x86_prefetchw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
|
|
| |
Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables
to update thresholds for "rep movsb" and "rep stosb" at run-time.
Note that the user specified threshold for "rep movsb" smaller than
the minimum threshold will be ignored.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
|
| |
An extension called extended feature disable (XFD) is an extension added
for Intel AMX to the XSAVE feature set that allows an operating system
to enable a feature while preventing specific user threads from using
the feature.
|
|
|
|
| |
bit_cpu_CLFSH should be (1u << 19), not (1u << 20).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Intel Advanced Matrix Extensions (Intel AMX) is a new programming
paradigm consisting of two components: a set of 2-dimensional registers
(tiles) representing sub-arrays from a larger 2-dimensional memory image,
and accelerators able to operate on tiles. Intel AMX is an extensible
architecture. New accelerators can be added and the existing accelerator
may be enhanced to provide higher performance. The initial features are
AMX-BF16, AMX-TILE and AMX-INT8, which are usable only if the operating
system supports both XTILECFG state and XTILEDATA state.
Add AMX-BF16, AMX-TILE and AMX-INT8 support to HAS_CPU_FEATURE and
CPU_FEATURE_USABLE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Divide architecture features into the usable features and the preferred
features. The usable features are for correctness and can be exported in
a stable ABI. The preferred features are for performance and only for
glibc internal use.
2. Change struct cpu_features to
struct cpu_features
{
struct cpu_features_basic basic;
unsigned int *usable_p;
struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX];
unsigned int usable[USABLE_FEATURE_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
and initialize usable_p to pointer to the usable arary so that
struct cpu_features
{
struct cpu_features_basic basic;
unsigned int *usable_p;
struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX];
};
can be exported via a stable ABI. The cpuid and usable arrays can be
expanded with backward binary compatibility for both .o and .so files.
3. Add COMMON_CPUID_INDEX_7_ECX_1 for AVX512_BF16.
4. Detect ENQCMD, PKS, AVX512_VP2INTERSECT, MD_CLEAR, SERIALIZE, HYBRID,
TSXLDTRK, L1D_FLUSH, CORE_CAPABILITIES and AVX512_BF16.
5. Rename CAPABILITIES to ARCH_CAPABILITIES.
6. Check if AVX512_VP2INTERSECT, AVX512_BF16 and PKU are usable.
7. Update CPU feature detection test.
|
|
|
|
| |
Checked on i686-linux-gnu.
|
|
|
|
| |
Since F16C requires AVX, set F16C usable only when AVX is usable.
|
|
|
|
| |
bit_cpu_CLFLUSHOPT should be (1u << 23), not (1u << 22).
|
|
|
|
|
|
| |
Enable Intel Silvermont optimization for Intel Goldmont Plus. Detect more
Intel Airmont processors. Optimize Intel Tremont like Intel Silvermont
with rep string instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When CET is enabled, it is an error to dlopen a non CET enabled shared
library in CET enabled application. It may be desirable to make CET
permissive, that is disable CET when dlopening a non CET enabled shared
library. With the new --enable-cet=permissive configure option, CET is
disabled when dlopening a non CET enabled shared library.
Add DEFAULT_DL_X86_CET_CONTROL to config.h.in:
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_elf_property
which enables CET features based on ELF property note.
--enable-cet=permissive it to
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_permissive
which enables CET features permissively.
Update tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and
tst-cet-legacy-6b to check --enable-cet and --enable-cet=permissive.
|
|
|
|
|
|
|
|
|
|
| |
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This consolidates the copy-pasted arch specific semaphore header into
single version (based on s390) which suffices 32-bit and and 64-bit
arch/ABI based on the canonical WORDSIZE.
For now I've left out arches which use alternate defines to choose for
32 vs 64-bit builds (aarch64, mips) which in theory can also use the same
header.
Passes build-many for
aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf
riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64
x86_64-linux-gnu microblaze-linux-gnu nios2-linux-gnu
Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit a98dc92dd1e278df4c501deb07985018bc2b06de ("x86: Add cache
information support for Zhaoxin processors") introduced an unused
variable warning in the default i686-linux-gnu build:
In file included from ../sysdeps/i386/cacheinfo.c:3:
../sysdeps/x86/cacheinfo.c: In function 'init_cacheinfo':
../sysdeps/x86/cacheinfo.c:762:16: error: unused variable 'eax' [-Werror=unused-variable]
762 | unsigned int eax;
| ^~~
|
|
|
|
|
| |
For the test case of the __get_cpu_features interface, add an item in
cpu_kinds and a switch case for Zhaoxin support.
|
|
|
|
|
|
|
|
|
|
|
| |
To obtain Zhaoxin CPU cache information, add a new function
handle_zhaoxin().
Add a new function get_common_cache_info() that extracts the code
in init_cacheinfo() to get the value of the variable shared, threads.
Add Zhaoxin branch in init_cacheinfo() for initializing variables,
such as __x86_shared_cache_size.
|
|
|
|
|
| |
To recognize Zhaoxin CPU Vendor ID, add a new architecture type
arch_kind_zhaoxin for Vendor Zhaoxin detection.
|
|
|
|
|
|
|
|
|
|
|
| |
The __sfp_handle_exceptions is not fully correct regarding raising
exceptions, since there is no direct way to raise only FP_EX_OVERFLOW
nor FP_EX_UNDERFLOW for SSE mode. Both libgcc and feraiseexcept rely
on x87 mode to accomplish it.
This reverts commit 460ee50de054396cc9791ff4cfdc2f5029fb923d.
Checked on x86_64.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The exported x86_64 fenv.h functions operate on both i387 and SSE (since
they should work on both float, double, and long double) while the
internal libc_fe* set either SSE (float, double, and float128) or
i387 (long double).
The libgcc __sfp_handle_exceptions (used on float128 implementation),
however, will set either SEE or i387 exception depending of the
exception to raise. This broke the internal assumption of float128
where only SSE operations will be used.
This patch reimplements the libgcc __sfp_handle_exceptions to use only
SSE operations and sets libgcc to use it instead of its own
implementation.
And I think we should fix libgcc in a similar manner, since checking on
config/i386/64/sfp-machine.h it already only supports SSE rounding mode
and x86_64 ABI also expectes float128 to use SSE registers [1]
(although it is not clear on how future implementation might implement
it).
Checked on x86_64-linux-gnu.
[1] https://github.com/hjl-tools/x86-psABI/wiki/X86-psABI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to fenvinline.h removal, this kind of optimization is better
implemented by the compiler. Also newer code avoid setting exceptions
directly (for instance the code to make new logf, log2f and powf
implementatation to now support SVID compat).
The BZ#94194 [1] the corresponding GCC bug for adding replacements
for these on x86.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94194
|
|
|
|
|
|
|
|
|
|
|
| |
Since legacy bitmap doesn't cover jitted code generated by legacy JIT
engine, it isn't very useful. This patch removes ARCH_CET_LEGACY_BITMAP
and treats indirect branch tracking similar to shadow stack by removing
legacy bitmap support.
Tested on CET Linux/x86-64 and non-CET Linux/x86-64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
|
|
|
|
|
|
| |
Particularly on CPUs without ERMS, the string instructions are slow,
so it is unclear whether this architecture-specific implementation is
in fact an optimization.
|
|
|
|
|
|
|
|
|
|
| |
We shouldn't make 2 calls to dlerror () in a row since the first call
will clear the error. We should just use the return value from the
first call.
Tested on Linux/x86-64.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Passes buildmanyglibc.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
| |
|
|
|
|
| |
Checked on x86_64-linux-gnu, i686-linux-gnu, and x86_64-linux-gnu-x32.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds a new generic __pthread_rwlock_arch_t definition meant
to be used by new ports. Its layout mimics the current usage on some
64 bits ports and it allows some ports to use the generic definition.
The arch __pthread_rwlock_arch_t definition is moved from
pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h).
Also the static intialization macro for pthread_rwlock_t is set to use
an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its
implementation.
The default pthread_rwlock_t layout differs from current ports with:
1. Internal layout is the same for 32 bits and 64 bits.
2. Internal flag is an unsigned short so it should not required
additional padding to align for word boundary (if it is the case
for the ABI).
Checked with a build on affected abis.
Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current way of defining the common mutex definition for POSIX and
C11 on pthreadtypes-arch.h (added by commit 06be6368da16104be5) is
not really the best options for newer ports. It requires define some
misleading flags that should be always defined as 0
(__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it
exposes options used solely for linuxthreads compat mode
(__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and
requires newer ports to explicit define them (adding more boilerplate
code).
This patch adds a new default __pthread_mutex_s definition meant to
be used by newer ports. Its layout mimics the current usage on both
32 and 64 bits ports and it allows most ports to use the generic
definition. Only ports that use some arch-specific definition (such
as hardware lock-elision or linuxthreads compat) requires specific
headers.
For 32 bit, the generic definitions mimic the other 32-bit ports
of using an union to define the fields uses on adaptive and robust
mutexes (thus not allowing both usage at same time) and by using a
single linked-list for robust mutexes. Both decisions seemed to
follow what recent ports have done and make the resulting
pthread_mutex_t/mtx_t object smaller.
Also the static intialization macro for pthread_mutex_t is set to use
a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine
in its struct_mutex.h if it requires additional fields to be
initialized.
Checked with a build on affected abis.
Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
|
|
|
|
|
|
|
|
|
|
| |
The new rwlock implementation added by cc25c8b4c1196 (2.25) removed
support for lock-elision. This patch removes remaining the
arch-specific unused definitions.
Checked with a build against all affected ABIs.
Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Transforms this, when linking in a shared object:
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3"..., 832) = 832
lseek(3, 792, SEEK_SET) = 792
read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68
fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0
lseek(3, 792, SEEK_SET) = 792
read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68
lseek(3, 864, SEEK_SET) = 864
read(3, "\4\0\0\0\20\0\0\0"..., 32) = 32
Into this:
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3"..., 832) = 832
pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68
fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0
pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68
pread(3, "\4\0\0\0\20\0\0\0"..., 32, 864) = 32
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With only two exceptions (sys/types.h and sys/param.h, both of which
historically might have defined BYTE_ORDER) the public headers that
include <endian.h> only want to be able to test __BYTE_ORDER against
__*_ENDIAN.
This patch creates a new bits/endian.h that can be included by any
header that wants to be able to test __BYTE_ORDER and/or
__FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs
__LONG_LONG_PAIR. It only defines macros in the implementation
namespace.
The existing bits/endian.h (which could not be included independently
of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER)
is renamed to bits/endianness.h. I also took the opportunity to
canonicalize the form of this header, which we are stuck with having
one copy of per architecture. Since they are so short, this means git
doesn’t understand that they were renamed from existing headers, sigh.
endian.h itself is a nonstandard header and its only remaining use
from a standard header is guarded by __USE_MISC, so I dropped the
__USE_MISC conditionals from around all of the public-namespace things
it defines. (This means, an application that requests strict library
conformance but includes endian.h will still see the definition of
BYTE_ORDER.)
A few changes to specific bits/endian(ness).h variants deserve
mention:
- sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to
sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did
have selectable endianness, but we have assembly code in
sysdeps/ia64 that assumes it’s little-endian, so there is no reason
to treat the ia64 endianness.h as linux-specific.
- The C-SKY port does not fully support big-endian mode, the compile
will error out if __CSKYBE__ is defined.
- The PowerPC port had extra logic in its bits/endian.h to detect a
broken compiler, which strikes me as unnecessary, so I removed it.
- The only files that defined __FLOAT_WORD_ORDER always defined it to
the same value as __BYTE_ORDER, so I removed those definitions.
The SH bits/endian(ness).h had comments inconsistent with the
actual setting of __FLOAT_WORD_ORDER, which I also removed.
- I *removed* copyright boilerplate from the few bits/endian(ness).h
headers that had it; these files record a single fact in a fashion
dictated by an external spec, so I do not think they are copyrightable.
As long as I was changing every copy of ieee754.h in the tree, I
noticed that only the MIPS variant includes float.h, because it uses
LDBL_MANT_DIG to decide among three different versions of
ieee854_long_double. This patch makes it not include float.h when
GCC’s intrinsic __LDBL_MANT_DIG__ is available.
* string/endian.h: Unconditionally define LITTLE_ENDIAN,
BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping
macros only on !__ASSEMBLER__. Move the definitions of
__BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER,
and __LONG_LONG_PAIR to...
* string/bits/endian.h: ...this new file, which includes
the renamed header bits/endianness.h for the definition of
__BYTE_ORDER and possibly __FLOAT_WORD_ORDER.
* string/Makefile: Install bits/endianness.h.
* include/bits/endian.h: New wrapper.
* bits/endian.h: Rename to bits/endianness.h.
Add multiple-include guard. Rewrite the comment explaining what
the machine-specific variants of this file should do.
* sysdeps/unix/sysv/linux/ia64/bits/endian.h:
Move to sysdeps/ia64.
* sysdeps/aarch64/bits/endian.h
* sysdeps/alpha/bits/endian.h
* sysdeps/arm/bits/endian.h
* sysdeps/csky/bits/endian.h
* sysdeps/hppa/bits/endian.h
* sysdeps/ia64/bits/endian.h
* sysdeps/m68k/bits/endian.h
* sysdeps/microblaze/bits/endian.h
* sysdeps/mips/bits/endian.h
* sysdeps/nios2/bits/endian.h
* sysdeps/powerpc/bits/endian.h
* sysdeps/riscv/bits/endian.h
* sysdeps/s390/bits/endian.h
* sysdeps/sh/bits/endian.h
* sysdeps/sparc/bits/endian.h
* sysdeps/x86/bits/endian.h:
Rename to endianness.h; canonicalize form of file; remove
redundant definitions of __FLOAT_WORD_ORDER.
* sysdeps/powerpc/bits/endianness.h: Remove logic to check for
broken compilers.
* ctype/ctype.h
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h
* sysdeps/ia64/ieee754.h
* sysdeps/ieee754/ieee754.h
* sysdeps/ieee754/ldbl-128/ieee754.h
* sysdeps/ieee754/ldbl-128ibm/ieee754.h
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
* sysdeps/mips/ieee754/ieee754.h
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
* sysdeps/nptl/pthread.h
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
* sysdeps/sparc/sparc32/ieee754.h
* sysdeps/unix/sysv/linux/generic/bits/stat.h
* sysdeps/unix/sysv/linux/generic/bits/statfs.h
* sysdeps/unix/sysv/linux/sys/acct.h
* wctype/bits/wctype-wchar.h:
Include bits/endian.h, not endian.h.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h.
* sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__
in ifdefs, instead of LDBL_MANT_DIG. Only include float.h
when __LDBL_MANT_DIG__ is not predefined, in which case
define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
C2X adds the interfaces from TS 18661-1, and all except a handful in
Annex F are unconditionally visible in C2X rather than only visible
when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates
glibc headers accordingly: most uses of __GLIBC_USE
(IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE
(IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the
type-generic macros in tgmath.h will go away when the functions are
changed to take pointer arguments.)
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update
comment.
(__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)].
* include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE
(IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise, except for totalorder, totalordermag, getpayload,
setpayload and setpayloadsig.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise,
except for totalorder and totalordermag.
|