about summary refs log tree commit diff
path: root/sysdeps/x86
Commit message (Collapse)AuthorAgeFilesLines
* Remove sysdeps/x86/fpu/bits/mathinline.h __finite inline.Joseph Myers2018-03-161-13/+0
| | | | | | | | | | | | | | | | | | | | | | | Continuing the removals of inline functions from the x86 bits/mathinline.h, this patch removes an inline of __finite (which was not actually architecture-specific at all beyond its endianness-dependence). This inline is not normally used with GCC 4.4 or later, because isfinite now uses __builtin_isfinite except for -fsignaling-nans. Allowing __builtin_isfinite etc. to work properly even for -fsignaling-nans, by implementing versions of those built-in functions that use integer arithmetic in GCC, is <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66462> (a patch was committed but had to be reverted because it caused problems, and that patch didn't address all formats for all architectures, only some, so by itself would not have been sufficient to allow glibc to use __builtin_isfinite unconditionally for new-enough GCC). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC] (__finite): Remove inline function.
* Remove all target specific __ieee754_sqrt(f/l) inlinesWilco Dijkstra2018-03-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now unused target specific__ieee754_sqrt(f/l) inlines. Also remove inlines of sqrt which are for really old GCC versions. Removing these is desirable, under the general principle of leaving such inlining to the compiler rather than trying to do it in installed headers, especially when only very old compilers are affected. Note that removing inlines for __ieee754_sqrt disables inlining in the sqrt wrapper functions. Given the sqrt function will typically only be called for negative arguments, it doesn't matter whether the inlining happens or not. * sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/s390/fpu/bits/mathinline.h: Remove file. * sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove. (sqrtf): Remove. (sqrtl): Remove. (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove. * sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove.
* Remove more old-compilers parts of sysdeps/x86/fpu/bits/mathinline.h.Joseph Myers2018-03-151-183/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes further parts of sysdeps/x86/fpu/bits/mathinline.h that are only of value for optimization with older compiler versions, in accordance with general principles of preferring the let the compiler deal with such inlining through built-in functions. In general, GCC supports inlining all these functions as of version 4.3 or earlier. However, some inlines in GCC may have had excessively restrictive conditions in past GCC versions (e.g. requiring -ffast-math when the inline is valid under broader conditions). (In particular, GCC had, before GCC 7, unnecessarily restrictive conditions on when it could apply floor and ceil inlines corresponding to the ones removed here. The same was true for rint, but bits/mathinline.h *also* was excessively restrictive there.) The removed sincos inlines are for __sincos etc. functions (not a public interface and not currently used in this header either; not in a part of the header ever used for building glibc itself). Likewise, the atan2 inlines included one for __atan2l, also not a public interface and not used for building glibc itself (calls inside glibc generally use __ieee754_atan2l, for which there is a separate __LIBC_INTERNAL_MATH_INLINES case in this header). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [__FAST_MATH__] (__sincos_code): Remove define and undefine. [__FAST_MATH__] (__sincos): Remove inline function. [__FAST_MATH__] (__sincosf): Remove inline function. [__FAST_MATH__] (__sincosl): Remove inline function. (__atan2l): Remove inline functions. [!__GNUC_PREREQ (3, 4)] (__atan2_code): Remove macro. [!__GNUC_PREREQ (3, 4) && __FAST_MATH__] (atan2): Remove inline function. (floor): Remove inline function. (ceil): Likewise. [__FAST_MATH__] (__ldexp_code): Remove macro. [__FAST_MATH__] (ldexp): Remove inline function. [__FAST_MATH__ && __USE_ISOC99] (ldexpf): Likewise. [__FAST_MATH__ && __USE_ISOC99] (ldexpl): Likewise. [__FAST_MATH__ && __USE_ISOC99] (rint): Likewise. [__USE_ISOC99] (__lrint_code): Remove macro. [__USE_ISOC99] (__llrint_code): Likewise. [__USE_ISOC99] (lrintf): Remove inline function. [__USE_ISOC99] (lrint): Likewise. [__USE_ISOC99] (lrintl): Likewise. [__USE_ISOC99] (llrint): Likewise. [__USE_ISOC99] (llrintf): Likewise. [__USE_ISOC99] (llrintl): Likewise.
* Remove old-GCC parts of x86 bits/mathinline.h.Joseph Myers2018-03-141-306/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with the general principle of preferring to let the compiler optimize function calls based on their standard semantics rather than putting inline definitions of such functions in installed headers, this patch removes various such inline definitions in the x86 bits/mathinline.h that were already disabled for GCC 3.5 or later and so were only used with very old compilers (for which good optimization is particularly unimportant); along with those inlines, a definition of __M_SQRT2, which was only used in such inline functions, is also removed. This is similar to an early step in removing the string.h inlines; I intend to follow up with further removals of bits/mathinline.h inline definitions in appropriate logical groups (with GCC bugs filed in cases where GCC doesn't already support corresponding optimizations). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [!__GNUC_PREREQ (3, 4)] (lrintf): Remove definitions used only with old GCC. [!__GNUC_PREREQ (3, 4)] (lrint): Likewise. [!__GNUC_PREREQ (3, 4)] (llrintf): Likewise. [!__GNUC_PREREQ (3, 4)] (llrint): Likewise. [!__GNUC_PREREQ (3, 4)] (fmaxf): Likewise. [!__GNUC_PREREQ (3, 4)] (fmax): Likewise. [!__GNUC_PREREQ (3, 4)] (fminf): Likewise. [!__GNUC_PREREQ (3, 4)] (fmin): Likewise. [!__GNUC_PREREQ (3, 4)] (rint): Likewise. [!__GNUC_PREREQ (3, 4)] (rintf): Likewise. [!__GNUC_PREREQ (3, 4)] (nearbyint): Likewise. [!__GNUC_PREREQ (3, 4)] (nearbyintf): Likewise. [!__GNUC_PREREQ (3, 4)] (ceil): Likewise. [!__GNUC_PREREQ (3, 4)] (ceilf): Likewise. [!__GNUC_PREREQ (3, 4)] (floor): Likewise. [!__GNUC_PREREQ (3, 4)] (floorf): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (tan): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (fmod): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (sin): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (cos): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log10): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (asin): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (acos): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (atan): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log1p): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (logb): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log2): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (drem): Likewise. [__FAST_MATH__] (__M_SQRT2): Remove macro.
* Unify and simplify bits/byteswap.h, bits/byteswap-16.h headers (bug 14508, ↵Joseph Myers2018-02-062-204/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bug 15512, bug 17082, bug 20530). We have a general principle of preferring optimizations for library facilities to use compiler built-in functions rather than being located in library headers, where the compiler can reasonably optimize code without needing to know glibc implementation details. This patch applies this principle to bits/byteswap.h, eliminating all the architecture-specific variants and bits/byteswap-16.h. The __bswap_16, __bswap_32 and __bswap_64 interfaces all become inline functions, never macros, using the GCC built-in functions where available and otherwise a single architecture-independent definition using shifts and masking (which compilers may well be able to detect and optimize; GCC has detection of various byte-swapping idioms). The __bswap_constant_32 macro needs to stay around because of uses in static initializers within glibc and its tests, and so for consistency all __bswap_constant_* are kept rather than just being inlined into the old-GCC-or-non-GCC parts of the __bswap_* inline function definitions. Various open bugs are addressed by this cleanup, with caveats about exactly what is covered by those bugs and when the bugs applied at all. Bug 14508 reports -Wformat warnings building glibc because __bswap_* sometimes returned the wrong types. Obviously we already don't have such warnings any more or the build would be failing, given -Werror, and I suspect that bug was originally for wrong types for x86_64, as fixed by commit d394eb742a3565d7fe7a4b02710a60b5f219ee64 (glibc 2.17). The only case I saw removed by this patch where the types would still have been wrong was the non-__GNUC__ case of __bswap_64 in the s390 header (using unsigned long long int, but uint64_t would be unsigned long int for 64-bit). In any case, the single header consistently uses __uintN_t types after this patch, thereby eliminating all such bugs. The existing string/test-endian-types.c test already suffices to verify that the types are correct with the compiler used to build glibc and its tests. Bug 15512 reports an error from __bswap_constant_16 with -Werror -Wsign-conversion. I am unable to reproduce this with any GCC version supporting -Wsign-conversion - all seem to be able to avoid warning for ((x) >> 8) & 0xffu, where x is uint16_t, which while it formally does involve an implicit conversion from int to unsigned int, is also a case where it should be easy for the compiler to see that the value converted is never negative. But in this patch __bswap_constant_16 is changed to use signed 0xff so that no such implicit conversion occurs at all, and a test with -Werror -Wsign-conversion is added. Bug 17082 objects to the use of ({}) statement expressions in these macros preventing use at file scope (in C, that's in sizeof etc.; in C++, more generally in static initializers). The particular case of these interfaces is fixed by this patch as it changes them to inline functions, eliminating all uses of ({}) in bits/byteswap.h, and a corresponding testcase is added. The bug tries to raise a more general policy question about use of ({}) in macros in installed headers, referring to "many other libc functions" (unspecified which functions are being considered). Since such policy questions belong on libc-alpha, and since there *are* macros in installed headers which can't really avoid using ({}) (where they are type-generic, so can't use an inline function, but need a temporary variable, and a few where the interface involves returning memory from alloca so can't use an inline function either), I propose to consider that bug fixed with this change. That is without prejudice to any other new bugs anyone wishes to file *for precisely defined sets of macros* requesting moving away from ({}) *where it is clearly possible for those interfaces*. Where ({}) can be avoided, typically by use of an inline function, I think that's a good idea - that inline functions are typically to be preferred to ({}) for header interfaces where such optimizations are useful but the interface is suited to being defined using an inline function. Bug 20530 requests use of __builtin_bswap16 when available (GCC 4.8 and later), which this patch implements. Tested for x86_64, and with build-many-glibcs.py. Also did an x86_64 test with the __GNUC_PREREQ conditionals changed to "#if 0" to verify the old-GCC/non-GCC case in the headers. (There are already existing tests for correctness of results of these interfaces.) [BZ #14508] [BZ #15512] [BZ #17082] [BZ #20530] * bits/byteswap.h: Update file comment. Do not include <bits/byteswap-16.h>. (__bswap_constant_16): Cast result to __uint16_t. Use signed 0xff constant. (__bswap_16): Define as inline function. (__bswap_constant_32): Reformat definition. (__bswap_32): Always define as inline function, not macro, using __uint32_t. Use __builtin_bswap32 if [__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_32. (__bswap_constant_64): Reformat definition. Do not use __extension__ here. (__bswap_64): Always define as inline function, not macro. Use __extension__ on function definition. Use __builtin_bswap64 if [__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_64. * string/test-endian-file-scope.c: New file. * string/test-endian-sign-conversion.c: Likewise. * string/Makefile (headers): Remove bits/byteswap-16.h. (tests): Add test-endian-file-scope and test-endian-sign-conversion. (CFLAGS-test-endian-sign-conversion.c): New variable. * bits/byteswap-16.h: Remove file. * sysdeps/ia64/bits/byteswap-16.h: Likewise. * sysdeps/ia64/bits/byteswap.h: Likewise. * sysdeps/m68k/bits/byteswap.h: Likewise. * sysdeps/s390/bits/byteswap-16.h: Likewise. * sysdeps/s390/bits/byteswap.h: Likewise. * sysdeps/tile/bits/byteswap.h: Likewise. * sysdeps/x86/bits/byteswap-16.h: Likewise. * sysdeps/x86/bits/byteswap.h: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-0140-40/+40
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Add _Float64x function aliases.Joseph Myers2017-11-272-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Support bits/floatn.h inclusion from .S files.Joseph Myers2017-11-171-28/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Further _FloatN / _FloatNx type alias support will involve making architecture-specific .S files use the common macros for libm function aliases. Making them use those macros will also serve to simplify existing code for aliases / symbol versions in various cases, similar to such simplifications for ldbl-opt code. The libm-alias-*.h files sometimes need to include <bits/floatn.h> to determine which aliases they should define. At present, this does not work for inclusion from .S files because <bits/floatn.h> can define typedefs for old compilers. This patch changes all the <bits/floatn.h> and <bits/floatn-common.h> headers to include __ASSEMBLER__ conditionals. Those conditionals disable everything related to C syntax in the __ASSEMBLER__ case, not just the problem typedefs, as that seemed cleanest. The __HAVE_* definitions remain in the __ASSEMBLER__ case, as those provide information that is required to define the correct set of aliases. Tested with build-many-glibcs.py for a representative set of configurations (x86_64-linux-gnu i686-linux-gnu ia64-linux-gnu powerpc64le-linux-gnu mips64-linux-gnu-n64 sparc64-linux-gnu) with GCC 6. Also tested with GCC 6 for i686-linux-gnu in conjunction with changes to use alias macros in .S files. * bits/floatn-common.h [!__ASSEMBLER]: Disable everything related to C syntax instead of availability and properties of types. * bits/floatn.h [!__ASSEMBLER]: Likewise. * sysdeps/ia64/bits/floatn.h [!__ASSEMBLER]: Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h [!__ASSEMBLER]: Likewise. * sysdeps/mips/ieee754/bits/floatn.h [!__ASSEMBLER]: Likewise. * sysdeps/powerpc/bits/floatn.h [!__ASSEMBLER]: Likewise. * sysdeps/x86/bits/floatn.h [!__ASSEMBLER]: Likewise.
* nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}Adhemerval Zanella2017-11-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two new internal defines to set the internal pthread_mutex_t layout required by the supported ABIS: 1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define __nusers fields before or after __kind. The preferred value for is 0 for new ports and it sets __nusers before __kind. 2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and __list members will be place inside an union for linuxthreads compatibility. The preferred value is 0 for ports and it sets to not use an union to define both fields. It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32. Checked with a make check run-built-tests=no on all afected ABIs. [BZ #22298] * nptl/allocatestack.c (allocate_stack): Check if __PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if __PTHREAD_MUTEX_HAVE_PREV is defined. * nptl/descr.h (pthread): Likewise. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. (__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE for internal layout. (__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE whether to use an union for __spins and __list fields. (__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION case. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86: Add sysdeps/x86/sysdep.hH.J. Lu2017-11-011-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new header file, sysdeps/x86/sysdep.h, for common assembly code macros between i386 and x86-64. Tested on i686 and x86-64. There are no differences in outputs of "readelf -a" and "objdump -dw" on all glibc shared objects before and after the patch. * sysdeps/i386/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise. * sysdeps/x86/sysdep.h: New file. * sysdeps/x86_64/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise.
* sysdeps/x86/libc-start.c: Add /* !SHARED */H.J. Lu2017-10-301-1/+1
| | | | * sysdeps/x86/libc-start.c: Add /* !SHARED */.
* Reformat sysdeps/x86/libc-start.cH.J. Lu2017-10-301-3/+3
| | | | * sysdeps/x86/libc-start.c: Reformat.
* Update x86 fix-fp-int-compare-invalid.h for GCC 8.Joseph Myers2017-10-241-2/+6
| | | | | | | | | | | | | | | | | | The glibc implementation of iseqsig relies on ordered comparison operators raising the "invalid" exception for quiet NaN operands, with a workaround on platforms where a GCC bug means that exception is not raised. For x86, that bug has now been fixed for GCC 8, so this patch disables the workaround in that case. If and when the corresponding bugs for powerpc and s390 are fixed, the headers for those platforms should of course be updated similarly. Tested for x86_64 and x86, including with GCC mainline. Note that other failures appear with GCC mainline because of spurious use of ordered comparison instructions for unordered operations <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82692>. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h (FIX_COMPARE_INVALID): Define to 0 if [__GNUC_PREREQ (8, 0)].
* Add bits/floatn.h defines for more _FloatN / _FloatNx types.Joseph Myers2017-10-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/floatn.h header currently only has defines relating to _Float128. This patch adds defines relating to other _FloatN / _FloatNx types. The approach taken is to add defines for all _FloatN / _FloatNx types known to GCC, and to put them in a common bits/floatn-common.h header included at the end of all the individual bits/floatn.h headers. If in future some defines become different for different glibc configurations, they will move out into the separate bits/floatn.h headers. Some defines are expected always to be the same across glibc ports. Corresponding defines are nevertheless put in this header. The intent is that where there are conditionals (in headers or in non-installed files) that can just repeat the same or nearly the same logic for each floating-point type, they should do so, even if in fact the cases for some types could be unconditionally present or absent because the same conditionals are true or false for all glibc configurations. This should make the glibc code with such conditionals easier to read, because the reader can just see that the same conditionals are repeated for each type, rather than seeing different conditionals for different types and needing to reason, at each location with such differences, why those differences are indeed correct there. (Cases involving per-format rather than per-type logic are more likely still to need differences in how they handle different types.) Having such defines and conditionals also helps in incremental preparation for adding _Float32 / _Float64 / _Float32x / _Float64x function aliases. I intend subsequent patches to add such conditionals corresponding to those already present for _Float128, as well as making more architecture-specific function implementations use common macros to define aliases in preparation for adding such _FloatN / _FloatNx aliases. Tested for x86_64. * bits/floatn-common.h: New file. * math/Makefile (headers): Add bits/floatn-common.h. * bits/floatn.h: Include <bits/floatn-common.h>. * sysdeps/ia64/bits/floatn.h: Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise. * sysdeps/mips/ieee754/bits/floatn.h: Likewise. * sysdeps/powerpc/bits/floatn.h: Likewise. * sysdeps/x86/bits/floatn.h: Likewise.
* x86-64: Use fxsave/xsave/xsavec in _dl_runtime_resolve [BZ #21265]H.J. Lu2017-10-204-31/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In _dl_runtime_resolve, use fxsave/xsave/xsavec to preserve all vector, mask and bound registers. It simplifies _dl_runtime_resolve and supports different calling conventions. ld.so code size is reduced by more than 1 KB. However, use fxsave/xsave/xsavec takes a little bit more cycles than saving and restoring vector and bound registers individually. Latency for _dl_runtime_resolve to lookup the function, foo, from one shared library plus libc.so: Before After Change Westmere (SSE)/fxsave 345 866 151% IvyBridge (AVX)/xsave 420 643 53% Haswell (AVX)/xsave 713 1252 75% Skylake (AVX+MPX)/xsavec 559 719 28% Skylake (AVX512+MPX)/xsavec 145 272 87% Ryzen (AVX)/xsavec 280 553 97% This is the worst case where portion of time spent for saving and restoring registers is bigger than majority of cases. With smaller _dl_runtime_resolve code size, overall performance impact is negligible. On IvyBridge, differences in build and test time of binutils with lazy binding GCC and binutils are noises. On Westmere, differences in bootstrap and "makc check" time of GCC 7 with lazy binding GCC and binutils are also noises. [BZ #21265] * sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET): New. * sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>. (get_common_indeces): Set xsave_state_size, xsave_state_full_size and bit_arch_XSAVEC_Usable if needed. (init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow and bit_arch_Use_dl_runtime_resolve_opt. * sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt): Removed. (bit_arch_Use_dl_runtime_resolve_slow): Likewise. (bit_arch_Prefer_No_AVX512): Updated. (bit_arch_MathVec_Prefer_No_AVX512): Likewise. (bit_arch_XSAVEC_Usable): New. (STATE_SAVE_OFFSET): Likewise. (STATE_SAVE_MASK): Likewise. [__ASSEMBLER__]: Include <cpu-features-offsets.h>. (cpu_features): Add xsave_state_size and xsave_state_full_size. (index_arch_Use_dl_runtime_resolve_opt): Removed. (index_arch_Use_dl_runtime_resolve_slow): Likewise. (index_arch_XSAVEC_Usable): New. * sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)): Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow. * sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables is enabled. * sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup): Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx, _dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt, _dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and _dl_runtime_resolve_xsavec. * sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE): Removed. (DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT instead of VEC_SIZE. (REGISTER_SAVE_BND0): Removed. (REGISTER_SAVE_BND1): Likewise. (REGISTER_SAVE_BND3): Likewise. (REGISTER_SAVE_RAX): Always defined to 0. (VMOV): Removed. (_dl_runtime_resolve_avx): Likewise. (_dl_runtime_resolve_avx_slow): Likewise. (_dl_runtime_resolve_avx_opt): Likewise. (_dl_runtime_resolve_avx512): Likewise. (_dl_runtime_resolve_avx512_opt): Likewise. (_dl_runtime_resolve_sse): Likewise. (_dl_runtime_resolve_sse_vex): Likewise. (USE_FXSAVE): New. (_dl_runtime_resolve_fxsave): Likewise. (USE_XSAVE): Likewise. (_dl_runtime_resolve_xsave): Likewise. (USE_XSAVEC): Likewise. (_dl_runtime_resolve_xsavec): Likewise. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512): Removed. (_dl_runtime_resolve_avx512_opt): Likewise. (_dl_runtime_resolve_avx): Likewise. (_dl_runtime_resolve_avx_opt): Likewise. (_dl_runtime_resolve_sse): Likewise. (_dl_runtime_resolve_sse_vex): Likewise. (_dl_runtime_resolve_fxsave): New. (_dl_runtime_resolve_xsave): Likewise. (_dl_runtime_resolve_xsavec): Likewise.
* x86-64: Don't set GLRO(dl_platform) to NULL [BZ #22299]H.J. Lu2017-10-191-4/+8
| | | | | | | | | | | | | | | | | | | | | | | Since ld.so expands $PLATFORM with GLRO(dl_platform), don't set GLRO(dl_platform) to NULL. [BZ #22299] * sysdeps/x86/cpu-features.c (init_cpu_features): Don't set GLRO(dl_platform) to NULL. * sysdeps/x86_64/Makefile (tests): Add tst-platform-1. (modules-names): Add tst-platformmod-1 and x86_64/tst-platformmod-2. (CFLAGS-tst-platform-1.c): New. (CFLAGS-tst-platformmod-1.c): Likewise. (CFLAGS-tst-platformmod-2.c): Likewise. (LDFLAGS-tst-platformmod-2.so): Likewise. ($(objpfx)tst-platform-1): Likewise. ($(objpfx)tst-platform-1.out): Likewise. (tst-platform-1-ENV): Likewise. ($(objpfx)x86_64/tst-platformmod-2.os): Likewise. * sysdeps/x86_64/tst-platform-1.c: New file. * sysdeps/x86_64/tst-platformmod-1.c: Likewise. * sysdeps/x86_64/tst-platformmod-2.c: Likewise.
* Add common ifunc-init.h headerAdhemerval Zanella2017-10-171-40/+1
| | | | | | | | | | This patch moves the generic definition from x86_64 init-arch to a common header ifunc-init.h. No functional changes is expected. Checked on a x86_64-linux-gnu build. * sysdeps/generic/ifunc-init.h: New file. * sysdeps/x86/init-arch.h: Use generic ifunc-init.h.
* Remove ancient __signbit inlinesWilco Dijkstra2017-09-281-38/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove __signbit inlines from mathinline.h. Math.h already uses the builtin when supported, so additional inlines are only used on pre 4.0 GCCs. Similarly remove ancient copysign and fabs inlines. * sysdeps/alpha/fpu/bits/mathinline.h: Delete file. * sysdeps/ia64/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/coldfire/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/powerpc/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/s390/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove * sysdeps/sparc/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/tile/bits/mathinline.h: Delete file. * sysdeps/x86/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove.
* Simplify C99 isgreater macrosWilco Dijkstra2017-09-281-93/+0
| | | | | | | | | | | | | | | | Simplify the C99 isgreater macros. Although some support was added in GCC 2.97, not all targets added support until GCC 3.1. Therefore only use the builtins in math.h from GCC 3.1 onwards, and defer to generic macros otherwise. Improve the generic isunordered macro to use compares rather than call fpclassify twice - this is not only faster but also correct for signaling NaNs. * math/math.h: Improve handling of C99 isgreater macros. * sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise. * sysdeps/powerpc/bits/mathinline.h: Likewise. * sysdeps/sparc/fpu/bits/mathinline.h: Likewise. * sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* x86: Add MathVec_Prefer_No_AVX512 to cpu-features [BZ #21967]H.J. Lu2017-09-122-0/+9
| | | | | | | | | | | | | | | | | | | | | AVX512 functions in mathvec are used on machines with AVX512. An AVX2 wrapper is also provided and it can be used when the AVX512 version isn't profitable. MathVec_Prefer_No_AVX512 is addded to cpu-features. If glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 is set in GLIBC_TUNABLES environment variable, the AVX2 wrapper will be used. Tested on x86-64 machines with and without AVX512. Also verified glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 on AVX512 machine. [BZ #21967] * sysdeps/x86/cpu-features.h (bit_arch_MathVec_Prefer_No_AVX512): New. (index_arch_MathVec_Prefer_No_AVX512): Likewise. * sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)): Handle MathVec_Prefer_No_AVX512. * sysdeps/x86_64/fpu/multiarch/ifunc-mathvec-avx512.h (IFUNC_SELECTOR): Return AVX2 version if MathVec_Prefer_No_AVX512 is set.
* x86: Add x86_64 to x86-64 HWCAP [BZ #22093]H.J. Lu2017-09-113-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before glibc 2.26, ld.so set dl_platform to "x86_64" and searched the "x86_64" subdirectory when loading a shared library. ld.so in glibc 2.26 was changed to set dl_platform to "haswell" or "xeon_phi", based on supported ISAs. This led to shared library loading failure for shared libraries placed under the "x86_64" subdirectory. This patch adds "x86_64" to x86-64 dl_hwcap so that ld.so will always search the "x86_64" subdirectory when loading a shared library. NB: We can't set x86-64 dl_platform to "x86-64" since ld.so will skip the "haswell" and "xeon_phi" subdirectories on "haswell" and "xeon_phi" machines. Tested on i686 and x86-64. [BZ #22093] * sysdeps/x86/cpu-features.c (init_cpu_features): Initialize GLRO(dl_hwcap) to HWCAP_X86_64 for x86-64. * sysdeps/x86/dl-hwcap.h (HWCAP_COUNT): Updated. (HWCAP_IMPORTANT): Likewise. (HWCAP_X86_64): New enum. (HWCAP_X86_AVX512_1): Updated. * sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): Add "x86_64". * sysdeps/x86_64/Makefile (tests): Add tst-x86_64-1. (modules-names): Add x86_64/tst-x86_64mod-1. (LDFLAGS-tst-x86_64mod-1.so): New. ($(objpfx)tst-x86_64-1): Likewise. ($(objpfx)x86_64/tst-x86_64mod-1.os): Likewise. (tst-x86_64-1-clean): Likewise. * sysdeps/x86_64/tst-x86_64-1.c: New file. * sysdeps/x86_64/tst-x86_64mod-1.c: Likewise.
* hurd: fix libm linkSamuel Thibault2017-09-031-1/+1
| | | | | | * sysdeps/x86/fpu/include/bits/fenv.h [NO_HIDDEN]: Redirect __feraiseexcept_renamed to feraiseexcept instead of __GI_feraiseexcept.
* Simplify HUGE_VAL definitions.Joseph Myers2017-08-311-41/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are various bits/huge_val*.h headers to define HUGE_VAL and related macros. All of them use __builtin_huge_val etc. for GCC 3.3 and later. Then there are various fallbacks, such as using a large hex float constant for GCC 2.96 and later, or using unions (with or without compound literals) to construct the bytes of an infinity, with this last being the reason for having architecture-specific files. Supporting TS 18661-3 _FloatN / _FloatNx types that have the same format as other supported types will mean adding more such macros; needing to add more headers for them doesn't seem very desirable. The fallbacks based on bytes of the representation of an infinity do not meet the standard requirements for a constant expression. At least one of them is also wrong: sysdeps/sh/bits/huge_val.h is producing a mixed-endian representation which does not match what GCC does. This patch eliminates all those headers, defining the macros directly in math.h. For GCC 3.3 and later, the built-in functions are used as now. For other compilers, a large constant 1e10000 (with appropriate suffix) is used. This is like the fallback for GCC 2.96 and later, but without using hex floats (which have no apparent advantage here). It is unambiguously valid standard C for all floating-point formats with infinities, which covers all formats supported by glibc or likely to be supported by glibc in future (C90 DR#025 said that if a floating-point format represents infinities, all real values lie within the range of representable values, so the constraints for constant expressions are not violated), but may generate compiler warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma correctly. If someone is actually using a compiler with glibc that does not claim to be GCC 3.3 or later, but which has a better way to define the HUGE_VAL macros, we can always add compiler conditionals in with alternative definitions. I intend to make similar changes for INF and NAN. The SNAN macros already just use __builtin_nans etc. with no fallback for compilers not claiming to be GCC 3.3 or later. Tested for x86_64. * math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h, bits/huge_vall.h or bits/huge_val_flt128.h. (HUGE_VAL): Define directly here. [__USE_ISOC99] (HUGE_VALF): Likewise. [__USE_ISOC99] (HUGE_VALL): Likewise. [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)] (HUGE_VAL_F128): Likewise. * math/Makefile (headers): Remove bits/huge_val.h, bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h. * bits/huge_val.h: Remove. * bits/huge_val_flt128.h: Likewise. * bits/huge_valf.h: Likewise. * bits/huge_vall.h: Likewise. * sysdeps/ia64/bits/huge_vall.h: Likewise. * sysdeps/ieee754/bits/huge_val.h: Likewise. * sysdeps/ieee754/bits/huge_valf.h: Likewise. * sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise. * sysdeps/sh/bits/huge_val.h: Likewise. * sysdeps/sparc/bits/huge_vall.h: Likewise. * sysdeps/x86/bits/huge_vall.h: Likewise.
* x86: Remove assembly versions of index_cpu_*/index_arch_*H.J. Lu2017-08-251-42/+1
| | | | | | | | | | | Since assembly versions of HAS_CPU_FEATURE and HAS_ARCH_FEATURE have been removed, assembly versions of index_cpu_* and index_arch_* can also be removed. Tested on i686 and x86-64 with and without --disable-multi-arch. * sysdeps/x86/cpu-features.h [__ASSEMBLER__] (index_cpu_*, index_arch_*): Removed.
* x86: Add IBT/SHSTK bits to cpu-featuresH.J. Lu2017-08-142-0/+10
| | | | | | | | | | | | | | | | Add IBT/SHSTK bits to cpu-features for Shadow Stack in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf * sysdeps/x86/cpu-features.h (bit_cpu_BIT): New. (bit_cpu_SHSTK): Likewise. (index_cpu_IBT): Likewise. (index_cpu_SHSTK): Likewise. (reg_IBT): Likewise. (reg_SHSTK): Likewise. * sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)): Handle index_cpu_IBT and index_cpu_SHSTK.
* x86: Remove assembly versions of HAS_CPU_FEATURE/HAS_ARCH_FEATUREH.J. Lu2017-08-041-57/+0
| | | | | | | | | Since all x86 IFUNC selectors are implemented in C, assembly versions of HAS_CPU_FEATURE and HAS_ARCH_FEATURE can be removed. * sysdeps/x86/cpu-features.h [__ASSEMBLER__] (LOAD_RTLD_GLOBAL_RO_RDX, HAS_FEATURE, LOAD_FUNC_GOT_EAX, HAS_CPU_FEATURE, HAS_ARCH_FEATURE): Removed.
* x86-64: Use _dl_runtime_resolve_opt only with AVX512F [BZ #21871]H.J. Lu2017-08-041-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On AVX machines with XGETBV (ECX == 1) like Skylake processors, (gdb) disass _dl_runtime_resolve_avx_opt Dump of assembler code for function _dl_runtime_resolve_avx_opt: 0x0000000000015890 <+0>: push %rax 0x0000000000015891 <+1>: push %rcx 0x0000000000015892 <+2>: push %rdx 0x0000000000015893 <+3>: mov $0x1,%ecx 0x0000000000015898 <+8>: xgetbv 0x000000000001589b <+11>: mov %eax,%r11d 0x000000000001589e <+14>: pop %rdx 0x000000000001589f <+15>: pop %rcx 0x00000000000158a0 <+16>: pop %rax 0x00000000000158a1 <+17>: and $0x4,%r11d 0x00000000000158a5 <+21>: bnd je 0x16200 <_dl_runtime_resolve_sse_vex> End of assembler dump. is slower than: (gdb) disass _dl_runtime_resolve_avx_slow Dump of assembler code for function _dl_runtime_resolve_avx_slow: 0x0000000000015850 <+0>: vorpd %ymm0,%ymm1,%ymm8 0x0000000000015854 <+4>: vorpd %ymm2,%ymm3,%ymm9 0x0000000000015858 <+8>: vorpd %ymm4,%ymm5,%ymm10 0x000000000001585c <+12>: vorpd %ymm6,%ymm7,%ymm11 0x0000000000015860 <+16>: vorpd %ymm8,%ymm9,%ymm9 0x0000000000015865 <+21>: vorpd %ymm10,%ymm11,%ymm10 0x000000000001586a <+26>: vpcmpeqd %xmm8,%xmm8,%xmm8 0x000000000001586f <+31>: vorpd %ymm9,%ymm10,%ymm10 0x0000000000015874 <+36>: vptest %ymm10,%ymm8 0x0000000000015879 <+41>: bnd jae 0x158b0 <_dl_runtime_resolve_avx> 0x000000000001587c <+44>: vzeroupper 0x000000000001587f <+47>: bnd jmpq 0x16200 <_dl_runtime_resolve_sse_vex> End of assembler dump. (gdb) since xgetbv takes much more cycles than single cycle operations like vpord/vvpcmpeq/ptest. _dl_runtime_resolve_opt should be used only with AVX512 where AVX512 instructions lead to lower CPU frequency on Skylake server. [BZ #21871] * sysdeps/x86/cpu-features.c (init_cpu_features): Set bit_arch_Use_dl_runtime_resolve_opt only with AVX512F.
* Consistently use uintN_t not u_intN_t in libm.Joseph Myers2017-08-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes libm code to make consistent use of C99 uintN_t types instead of sometimes using those and sometimes using the older nonstandard u_intN_t names. This makes sense as a cleanup in its own right, and also facilitates merges to GCC's libquadmath (which gets the types from stdint.h and so may not have u_intN_t available at all). Tested for x86_64, and with build-many-glibcs.py. * math/s_nextafter.c (__nextafter): Use uintN_t instead of u_intN_t. * math/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/generic/math_private.h (ieee_double_shape_type): Likewise. (ieee_float_shape_type): Likewise. * sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise. * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise. * sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise. (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise. * sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise. * sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise. * sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise. * sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise. * sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise. * sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise. * sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise. * sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise. * sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise. * sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise. * sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf): Likewise. * sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise. * sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise. * sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise. * sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf): Likewise. * sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise. * sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise. * sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise. * sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise. * sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise. * sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise. * sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise. * sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise. * sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise. (__ieee754_y0l): Likewise. (pzero): Likewise. (qzero): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. (__ieee754_y1l): Likewise. (pone): Likewise. (qone): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. (__erfcl): Likewise. * sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise. * sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise. * sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise.
* float128: Add signbit alternative for old compilersGabriel F. T. Gomes2017-06-301-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In math/math.h, __MATH_TG will expand signbit to __builtin_signbit*, e.g.: __builtin_signbitf128, before GCC 6. However, there has never been a __builtin_signbitf128 in GCC and the type-generic builtin is only available since GCC 6. For older GCC, this patch defines __builtin_signbitf128 to __signbitf128, so that the internal function is used instead of the non-existent builtin. This patch also changes the implementation of __signbitf128, because it was reusing the implementation of __signbitl from ldbl-128, which calls __builtin_signbitl. Using the long double version of the builtin is not correct on machines where _Float128 is ABI-distinct from long double (i.e.: ia64, powerpc64le, x86, x86_84). The new implementation does not rely on builtins when being built with GCC versions older than 6.0. The new code does not currently affect powerpc64le builds, because only GCC 6.2 fulfills the requirements from configure. It might affect powerpc64le builds if those requirements are backported to older versions of the compiler. The new code affects x86_64 builds, since glibc is supposed to build correctly with older versions of GCC. Tested for powerpc64le and x86_64. * include/math.h (__signbitf128): Define as hidden. * sysdeps/ieee754/float128/s_signbitf128.c (__signbitf128): Reimplement without builtins. * sysdeps/ia64/bits/floatn.h [!__GNUC_PREREQ (6, 0)] (__builtin_signbitf128): Define to __signbitf128. * sysdeps/powerpc/bits/floatn.h: Likewise. * sysdeps/x86/bits/floatn.h: Likewise.
* Add float128 support for x86_64, x86.Joseph Myers2017-06-266-0/+382
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Avoid localplt issues from x86 fereaiseexcept inline.Joseph Myers2017-06-232-0/+11
| | | | | | | | | | | | | | | | | | | | | | | Building for x86_64 with float128 support, I get a localplt test failure from lrintf128 calling feraiseexcept. The problem is that an inline optimized version of feraiseexcept calls __feraiseexcept_renamed in cases where it doesn't completely expand inline, and that in turn is redirected to feraiseexcept for a library call, so meaning the redirection of feraiseexcept to __GI_feraiseexcept inside libm is lost for that call. This patch fixes the problem by moving the redirect to an internal header in the _LIBC case, with the internal header using __GI_feraiseexcept where appropriate. Tested for x86_64 (in conjunction with float128 patches). * sysdeps/x86/fpu/bits/fenv.h [_LIBC] (__feraiseexcept_renamed): Do not declare. * sysdeps/x86/fpu/include/bits/fenv.h [_LIBC && __USE_EXTERN_INLINES] (__feraiseexcept_renamed): Declare here, redirected to __GI_feraiseexcept if [SHARED && IS_IN (libm)].
* x86: Rename glibc.tune.ifunc to glibc.tune.hwcapsH.J. Lu2017-06-214-26/+19
| | | | | | | | | | | | | | | | | | | | | | | | Rename glibc.tune.ifunc to glibc.tune.hwcaps and move it to sysdeps/x86/dl-tunables.list since it is x86 specicifc. Also change type of data_cache_size, data_cache_size and non_temporal_threshold to unsigned long int to match size_t. Remove usage DEFAULT_STRLEN from cpu-tunables.c. * elf/dl-tunables.list (glibc.tune.ifunc): Removed. * sysdeps/x86/dl-tunables.list (glibc.tune.hwcaps): New. Remove security_level on all fields. * manual/tunables.texi: Replace ifunc with hwcaps. * sysdeps/x86/cpu-features.c (TUNABLE_CALLBACK (set_ifunc)): Renamed to .. (TUNABLE_CALLBACK (set_hwcaps)): This. (init_cpu_features): Updated. * sysdeps/x86/cpu-features.h (cpu_features): Change type of data_cache_size, data_cache_size and non_temporal_threshold to unsigned long int. * sysdeps/x86/cpu-tunables.c (DEFAULT_STRLEN): Removed. (TUNABLE_CALLBACK (set_ifunc)): Renamed to ... (TUNABLE_CALLBACK (set_hwcaps)): This. Update comments. Don't use DEFAULT_STRLEN.
* Move x86 specific tunables to x86/dl-tunables.listH.J. Lu2017-06-201-0/+34
| | | | | * elf/dl-tunables.list: Move x86 specific tunables to ... * sysdeps/x86/dl-tunables.list: Here. New file.
* tunables: Add IFUNC selection and cache sizesH.J. Lu2017-06-204-1/+366
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current IFUNC selection is based on microbenchmarks in glibc. It should give the best performance for most workloads. But other choices may have better performance for a particular workload or on the hardware which wasn't available at the selection was made. The environment variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz, where the feature name is case-sensitive and has to match the ones in cpu-features.h. It can be used by glibc developers to override the IFUNC selection to tune for a new processor or improve performance for a particular workload. It isn't intended for normal end users. NOTE: the IFUNC selection may change over time. Please check all multiarch implementations when experimenting. Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is provided to set threshold to use non temporal store to NUMBER, GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set shared cache size. * elf/dl-tunables.list (tune): Add ifunc, x86_non_temporal_threshold, x86_data_cache_size and x86_shared_cache_size. * manual/tunables.texi: Document glibc.tune.ifunc, glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size and glibc.tune.x86_non_temporal_threshold. * sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86/cacheinfo.c (init_cacheinfo): Check and get data cache size, shared cache size and non temporal threshold from cpu_features. * sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE): New. [HAVE_TUNABLES] Include <unistd.h>. [HAVE_TUNABLES] Include <elf/dl-tunables.h>. [HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise. [HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set IFUNC selection, data cache size, shared cache size and non temporal threshold. * sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size, shared_cache_size and non_temporal_threshold.
* Remove bits/string.h.Zack Weinberg2017-06-201-1996/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These machine-dependent inline string functions have never been on by default, and even if they were a good idea at the time they were introduced, they haven't really been touched in ten to fifteen years and probably aren't a good idea on current-gen processors. Current thinking is that this class of optimization is best left to the compiler. * bits/string.h, string/bits/string.h * sysdeps/aarch64/bits/string.h * sysdeps/m68k/m680x0/m68020/bits/string.h * sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h * sysdeps/x86/bits/string.h: Delete file. * string/string.h: Don't include bits/string.h. * string/bits/string3.h: Rename to bits/string_fortified.h. No need to undef various symbols that the removed headers might have defined as macros. * string/Makefile (headers): Remove bits/string.h, change bits/string3.h to bits/string_fortified.h. * string/string-inlines.c: Update commentary. Remove definitions of various macros that nothing looks at anymore. Don't directly include bits/string.h. Set _STRING_INLINE_unaligned here, based on compiler-predefined macros. * string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY _is_ defined, provide internal hidden alias __strncat. * include/string.h: Declare internal hidden alias __strncat. Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is not defined. * include/bits/string3.h: Rename to bits/string_fortified.h, update to match above. * sysdeps/i386/string-inlines.c: Define compat symbols for everything formerly defined by sysdeps/x86/bits/string.h. Make existing definitions into compat symbols as well. Remove some no-longer-necessary messing around with macros. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c * sysdeps/s390/multiarch/mempcpy.c No need to define _HAVE_STRING_ARCH_mempcpy. Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * sysdeps/i386/i686/multiarch/strncat-c.c * sysdeps/s390/multiarch/strncat-c.c * sysdeps/x86_64/multiarch/strncat-c.c Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
* Make LD_HWCAP_MASK usable for static binariesSiddhesh Poyarekar2017-06-071-5/+3
| | | | | | | | | | | | | | | | | | The LD_HWCAP_MASK environment variable was ignored in static binaries, which is inconsistent with the behaviour of dynamically linked binaries. This seems to have been because of the inability of ld_hwcap_mask being read early enough to influence anything but now that it is in tunables, the mask is usable in static binaries as well. This feature is important for aarch64, which relies on HWCAP_CPUID being masked out to disable multiarch. A sanity test on x86_64 shows that there are no failures. Likewise for aarch64. * elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask. * sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]: Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Always set up hwcap and hwcap_mask.
* tunables: Use glibc.tune.hwcap_mask tunable instead of _dl_hwcap_maskSiddhesh Poyarekar2017-06-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Drop _dl_hwcap_mask when building with tunables. This completes the transition of hwcap_mask reading from _dl_hwcap_mask to tunables. * elf/dl-hwcaps.h: New file. * elf/dl-hwcaps.c: Include it. (_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update glibc.tune.hwcap_mask. * elf/dl-cache.c: Include dl-hwcaps.h. (_dl_load_cache_lookup)[HAVE_TUNABLES]: Read glibc.tune.hwcap_mask. * sysdeps/sparc/sparc32/dl-machine.h: Likewise. * elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. * elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. (process_envvars)[HAVE_TUNABLES]: Likewise. * sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]: Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Don't initialize dl_hwcap_mask when tunables are enabled.
* x86: Don't use dl_x86_cpu_features in cacheinfo.cH.J. Lu2017-06-051-15/+22
| | | | | | | | | | | | Since cpu_features is available, use it instead of dl_x86_cpu_features. * sysdeps/x86/cacheinfo.c (intel_check_word): Accept cpu_features and use it instead of dl_x86_cpu_features. (handle_intel): Replace maxidx with cpu_features. Pass cpu_features to intel_check_word. (__cache_sysconf): Pass cpu_features to handle_intel. (init_cacheinfo): Likewise. Use cpu_features instead of dl_x86_cpu_features.
* x86-64: Optimize memcmp/wmemcmp with AVX2 and MOVBEH.J. Lu2017-06-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimize x86-64 memcmp/wmemcmp with AVX2. It uses vector compare as much as possible. It is as fast as SSE4 memcmp for size <= 16 bytes and up to 2X faster for size > 16 bytes on Haswell and Skylake. Select AVX2 memcmp/wmemcmp on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. Key features: 1. For size from 2 to 7 bytes, load as big endian with movbe and bswap to avoid branches. 2. Use overlapping compare to avoid branch. 3. Use vector compare when size >= 4 bytes for memcmp or size >= 8 bytes for wmemcmp. 4. If size is 8 * VEC_SIZE or less, unroll the loop. 5. Compare 4 * VEC_SIZE at a time with the aligned first memory area. 6. Use 2 vector compares when size is 2 * VEC_SIZE or less. 7. Use 4 vector compares when size is 4 * VEC_SIZE or less. 8. Use 8 vector compares when size is 8 * VEC_SIZE or less. * sysdeps/x86/cpu-features.h (index_cpu_MOVBE): New. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memcmp-avx2 and wmemcmp-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test __memcmp_avx2 and __wmemcmp_avx2. * sysdeps/x86_64/multiarch/memcmp-avx2.S: New file. * sysdeps/x86_64/multiarch/wmemcmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Use __memcmp_avx2 on AVX 2 machines if AVX unaligned load is fast and vzeroupper is preferred. * sysdeps/x86_64/multiarch/wmemcmp.S: Use __wmemcmp_avx2 on AVX 2 machines if AVX unaligned load is fast and vzeroupper is preferred.
* x86: Add macros to implement ifunce selection in CH.J. Lu2017-06-051-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These macros are used to implement ifunc selection in C. To implement an ifunc function, foo, which returns the address of __foo_sse2 or __foo_avx2: __foo_avx2: #define foo __redirect_foo #define __foo __redirect___foo #include <foo.h> #undef foo #undef __foo #define SYMBOL_NAME foo #include <init-arch.h> extern __typeof (REDIRECT_NAME) OPTIMIZE (sse2) attribute_hidden; extern __typeof (REDIRECT_NAME) OPTIMIZE (avx2) attribute_hidden; static inline void * foo_selector (void) { if (use AVX2) return OPTIMIZE (avx2); return OPTIMIZE (sse2); } libc_ifunc_redirected (__redirect_foo, foo, foo_selector ()); * sysdeps/x86/init-arch.h (PASTER1): New. (EVALUATOR1): Likewise. (PASTER2): Likewise. (EVALUATOR2): Likewise. (REDIRECT_NAME): Likewise. (OPTIMIZE): Likewise. (IFUNC_SELECTOR): Likewise.
* x86: Update __x86_shared_non_temporal_thresholdH.J. Lu2017-06-021-2/+4
| | | | | | | | | | | | | __x86_shared_non_temporal_threshold was set to 6 times of per-core shared cache size, based on the large memcpy micro benchmark in glibc on a 8-core processor. For a processor with more than 8 cores, the threshold is too low. Set __x86_shared_non_temporal_threshold to the 3/4 of the total shared cache size so that it is unchanged on 8-core processors. On processors with less than 8 cores, the threshold is lower. * sysdeps/x86/cacheinfo.c (__x86_shared_non_temporal_threshold): Set to the 3/4 of the total shared cache size.
* Delay initialization of CPU features struct in static binariesSiddhesh Poyarekar2017-05-311-18/+5
| | | | | | | | | | | | | | | | | | | | | Allow the CPU features structure set up to be overridden by tunables by delaying it to until after tunables are initialized. The initialization is already delayed in dynamically linked glibc, it is only in static binaries that the initialization is set early to allow it to influence IFUNC relocations that happen in libc-start. It is a bit too early however and there is a good place between tunables initialization and IFUNC relocations where this can be done. Verified that this does not regress the testsuite. * csu/libc-start.c [!ARCH_INIT_CPU_FEATURES]: Define ARCH_INIT_CPU_FEATURES. (LIBC_START_MAIN): Call it. * sysdeps/unix/sysv/linux/aarch64/libc-start.c (__libc_start_main): Remove. (ARCH_INIT_CPU_FEATURES): New macro. * sysdeps/x86/libc-start.c (__libc_start_main): Remove. (ARCH_INIT_CPU_FEATURES): New macro.
* x86: Don't include cacheinfo.c in ld.soH.J. Lu2017-05-241-0/+4
| | | | | | | Since cacheinfo.c isn't used by ld.so, there is no need to include it in ld.so. * sysdeps/x86/cacheinfo.c: Skip if not in libc.
* x86: Use __get_cpu_features to get cpu_featuresH.J. Lu2017-05-241-10/+9
| | | | | | | | | | | Remove is_intel, is_amd and max_cpuid macros. Use __get_cpu_features to get cpu_features instead. * sysdeps/x86/cacheinfo.c (is_intel): Removed. (is_amd): Likewise. (max_cpuid): Likewise. (__cache_sysconf): Use __get_cpu_features to get cpu_features. (init_cacheinfo): Likewise.
* Move shared pthread definitions to common headersAdhemerval Zanella2017-05-092-271/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes all the replicated pthread definition accross the architectures and consolidates it on shared headers. The new organization is as follow: * Architecture specific definition (such as pthread types sizes) are place in the new pthreadtypes-arch.h header in arch specific path. * All shared structure definition are moved to a common NPTL header at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch specific one for internal definitions). * Also, for C11 future thread support, both mutex and condition definition are placed in a common header at sysdeps/nptl/bits/thread-shared-types.h. It is also a refactor patch without expected functional changes. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * posix/Makefile (headers): Add pthreadtypes-arch.h and thread-shared-types.h. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch specific thread definition. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nptl/bits/thread-shared-types.h: New file: shared thread definition between POSIX and C11. * sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file. * sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nptl/bits/pthreadtypes.h: New file: common thread definitions shared across all architectures.
* x86: Set dl_platform and dl_hwcap from CPU features [BZ #21391]H.J. Lu2017-05-035-1/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dl_platform and dl_hwcap are set from AT_PLATFORM and AT_HWCAP very early during startup. They are used by dynamic linker to determine platform and build an array of hardware capability names, which are added to search path when loading shared object. dl_platform and dl_hwcap are unused on x86-64. On i386, i386, i486, i586 and i686 platforms were supported and only SSE2 capability was used. On x86, usage of AT_PLATFORM and AT_HWCAP to determine platform and processor capabilities is obsolete since all information is available in dl_x86_cpu_features. This patch sets dl_platform and dl_hwcap from dl_x86_cpu_features in dynamic linker. On i386, the available plaforms are changed to i586 and i686 since i386 has been deprecated. On x86-64, the available plaforms are haswell, which is for Haswell class processors with BMI1, BMI2, LZCNT, MOVBE, POPCNT, AVX2 and FMA, and xeon_phi, which is for Xeon Phi class processors with AVX512F, AVX512CD, AVX512ER and AVX512PF. A capability, avx512_1, is also added to x86-64 for AVX512 ISAs: AVX512F, AVX512CD, AVX512BW, AVX512DQ and AVX512VL. [BZ #21391] * sysdeps/i386/dl-machine.h (dl_platform_init) [IS_IN (rtld)]: Only call init_cpu_features. [!IS_IN (rtld)]: Only set GLRO(dl_platform) to NULL if needed. * sysdeps/x86_64/dl-machine.h (dl_platform_init): Likewise. * sysdeps/i386/dl-procinfo.h: Removed. * sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Don't include <sysdeps/i386/dl-procinfo.h> nor <ldsodefs.h>. Include <sysdeps/x86/dl-procinfo.h>. (_dl_procinfo): Replace _DL_HWCAP_COUNT with 32. * sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h [!IS_IN (ldconfig)]: Include <sysdeps/x86/dl-procinfo.h> instead of <sysdeps/generic/dl-procinfo.h>. * sysdeps/x86/cpu-features.c: Include <dl-hwcap.h>. (init_cpu_features): Set dl_platform, dl_hwcap and dl_hwcap_mask. * sysdeps/x86/cpu-features.h (bit_cpu_LZCNT): New. (bit_cpu_MOVBE): Likewise. (bit_cpu_BMI1): Likewise. (bit_cpu_BMI2): Likewise. (index_cpu_BMI1): Likewise. (index_cpu_BMI2): Likewise. (index_cpu_LZCNT): Likewise. (index_cpu_MOVBE): Likewise. (index_cpu_POPCNT): Likewise. (reg_BMI1): Likewise. (reg_BMI2): Likewise. (reg_LZCNT): Likewise. (reg_MOVBE): Likewise. (reg_POPCNT): Likewise. * sysdeps/x86/dl-hwcap.h: New file. * sysdeps/x86/dl-procinfo.h: Likewise. * sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): New. (_dl_x86_platforms): Likewise.
* x86: Use AVX2 memcpy/memset on Skylake server [BZ #21396]H.J. Lu2017-04-182-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Skylake server, AVX512 load/store instructions in memcpy/memset may lead to lower CPU turbo frequency in certain situations. Use of AVX2 in memcpy/memset has been observed to have improved overall performance in many workloads due to the higher frequency. Since AVX512ER is unique to Xeon Phi, this patch sets Prefer_No_AVX512 if AVX512ER isn't available so that AVX2 versions of memcpy/memset are used on Skylake server. [BZ #21396] * sysdeps/x86/cpu-features.c (init_cpu_features): Set Prefer_No_AVX512 if AVX512ER isn't available. * sysdeps/x86/cpu-features.h (bit_arch_Prefer_No_AVX512): New. (index_arch_Prefer_No_AVX512): Likewise. * sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Don't use AVX512 version if Prefer_No_AVX512 is set. * sysdeps/x86_64/multiarch/memcpy_chk.S (__memcpy_chk): Likewise. * sysdeps/x86_64/multiarch/memmove.S (__libc_memmove): Likewise. * sysdeps/x86_64/multiarch/memmove_chk.S (__memmove_chk): Likewise. * sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S (__mempcpy_chk): Likewise. * sysdeps/x86_64/multiarch/memset.S (memset): Likewise. * sysdeps/x86_64/multiarch/memset_chk.S (__memset_chk): Likewise.
* x86: Set Prefer_No_VZEROUPPER if AVX512ER is availableH.J. Lu2017-04-182-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | AVX512ER won't be implemented in any Xeon processors and will be in all Xeon Phi processors. Don't check CPU model number when setting Prefer_No_VZEROUPPER for Xeon Phi. Instead, set Prefer_No_VZEROUPPER if AVX512ER is available. It works with current and future Xeon Phi and non-Xeon Phi processors. * sysdeps/x86/cpu-features.c (init_cpu_features): Set Prefer_No_VZEROUPPER if AVX512ER is available. * sysdeps/x86/cpu-features.h (bit_cpu_AVX512PF): New. (bit_cpu_AVX512ER): Likewise. (bit_cpu_AVX512CD): Likewise. (bit_cpu_AVX512BW): Likewise. (bit_cpu_AVX512VL): Likewise. (index_cpu_AVX512PF): Likewise. (index_cpu_AVX512ER): Likewise. (index_cpu_AVX512CD): Likewise. (index_cpu_AVX512BW): Likewise. (index_cpu_AVX512VL): Likewise. (reg_AVX512PF): Likewise. (reg_AVX512ER): Likewise. (reg_AVX512CD): Likewise. (reg_AVX512BW): Likewise. (reg_AVX512VL): Likewise.
* Consolidate pthreadtype.h placementConsolidate pthreadtype.h placementAdhemerval Zanella2017-04-101-0/+0
| | | | | | | | | | | | | | | | | | | | | This patch moves all arch specific pthreadtypes.h to a similar path for all architectures (sysdeps/unix/sysv/<arch>/bits). No functional or build change is expected. The idea is mainly to organize the header placement for all architectures. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * sysdeps/unix/sysv/linux/x86/Implies: New file. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h: Move to ... * sysdeps/alpha/nptl/bits/pthreadtypes.h: ... here. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Move to ... * sysdeps/powerpc/nptl/bits/pthreadtypes.h: ... here. * sysdeps/x86/bits/pthreadtypes.h: Move to ... * sysdeps/x86/nptl/bits/pthreadtypes.h: ... here.
* Add sysdeps/x86/dl-procinfo.cH.J. Lu2017-04-101-0/+52
| | | | | | | | | | Add sysdeps/x86/dl-procinfo.c for x86 version of processor capability information to reduce duplication between i386 and x86_64 dl-procinfo.c. * sysdeps/i386/dl-procinfo.c: Include <sysdeps/x86/dl-procinfo.c>. * sysdeps/x86_64/dl-procinfo.c: Likewise. * sysdeps/x86/dl-procinfo.c: New file.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 21:17:23 +0000