about summary refs log tree commit diff
path: root/sysdeps/x86/fpu
Commit message (Collapse)AuthorAgeFilesLines
* Fix sysdeps/x86/fpu/s_ffma.c for 32-bit FMA processor caseJoseph Myers2021-09-241-2/+6
| | | | | | | | | | | | | | | | | | | | It turns out the __SSE2_MATH__ conditional in sysdeps/x86/fpu/s_ffma.c does not cover all cases where the x86 fenv_private.h macros might manipulate one of the SSE and 387 floating-point state, while the actual fma implementation uses the other. Specifically, in the 32-bit case, with a compiler not defaulting to -mfpmath=sse, but testing on a processor with hardware FMA support, the multiarch fma function implementations will end up using SSE, while the fenv_private.h macros will use the 387 state for double. Change the conditional to use the default macros rather than the optimized ones in all cases except when the compiler inlines an fma instruction (in which case, since all those instructions are SSE instructions and -mfpmath=sse must be in effect for them to be inlined, the optimized macros will only use the SSE state and it's OK for them to only use the SSE state). Tested for x86_64 and x86. H.J. reports in <https://sourceware.org/pipermail/libc-alpha/2021-September/131367.html> that it fixes the problems he observed.
* Fix ffma use of round-to-odd on x86Joseph Myers2021-09-231-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 32-bit x86 with -mfpmath=sse, and on x86_64 with --disable-multi-arch, the tests of ffma and its aliases (fma narrowing from binary64 to binary32) fail. This is probably the issue reported by H.J. in <https://sourceware.org/pipermail/libc-alpha/2021-September/131277.html>. The problem is the use of fenv_private.h macros in the round-to-odd implementation. Those macros are set up to manipulate only one of the SSE and 387 floating-point state, whichever is relevant for the type indicated by the suffix on the macro name. But x86 configurations sometimes use the ldbl-96 implementation of binary64 fma (that's where --disable-multi-arch is relevant for x86_64: it causes the ldbl-96 implementation to be used, instead of an IFUNC implementation that falls back to the dbl-64 version), contrary to the expectations of those macros for functions operating on double when __SSE2_MATH__ is defined. This can be addressed by using the default versions of those macros (giving x86 its own version of s_ffma.c), as is done for the *f128 macro variants where it depends on the details of how GCC was configured when building libgcc which floating-point state is affected by _Float128 arithmetic. The issue only applies when __SSE2_MATH__ is defined, and doesn't apply when __FP_FAST_FMA is defined (because in that case, fma will be inlined by the compiler, meaning it's definitely an SSE operation; for the same reason, this is not an issue for narrowing sqrt, as hardware sqrt is always inlined in that implementation for x86), but in other cases it's safest to use the default versions of the fenv_private.h macros to ensure things work whichever fma implementation is used. Tested for x86_64 (with and without --disable-multi-arch) and x86 (with and without -mfpmath=sse).
* Remove "Contributed by" linesSiddhesh Poyarekar2021-09-032-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Drop nan-pseudo-number.h usage from testsSiddhesh Poyarekar2021-01-041-1/+0
| | | | | | | | | | Make the tests use TEST_COND_intel96 to decide on whether to build the unnormal tests instead of the macro in nan-pseudo-number.h and then drop the header inclusion. This unbreaks test runs on all architectures that do not have ldbl-96. Also drop the HANDLE_PSEUDO_NUMBERS macro since it is not used anywhere.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-0218-18/+18
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* x86 long double: Consider pseudo numbers as signalingSiddhesh Poyarekar2020-12-301-0/+30
| | | | | | | Add support to treat pseudo-numbers specially and implement x86 version to consider all of them as signaling. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86 long double: Support pseudo numbers in isnanlSiddhesh Poyarekar2020-12-241-0/+45
| | | | | | | This syncs up isnanl behaviour with gcc. Also move the isnanl implementation to sysdeps/x86 and remove the sysdeps/x86_64 version. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86 long double: Support pseudo numbers in fpclassifylSiddhesh Poyarekar2020-12-241-0/+46
| | | | | | | | Also move sysdeps/i386/fpu/s_fpclassifyl.c to sysdeps/x86/fpu/s_fpclassifyl.c and remove sysdeps/x86_64/fpu/s_fpclassifyl.c Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* i386: Use builtin sqrtlAdhemerval Zanella2020-06-221-0/+27
| | | | Checked on i686-linux-gnu.
* Revert "x86_64: Add SSE sfp-exceptions"Adhemerval Zanella2020-04-201-57/+0
| | | | | | | | | | | The __sfp_handle_exceptions is not fully correct regarding raising exceptions, since there is no direct way to raise only FP_EX_OVERFLOW nor FP_EX_UNDERFLOW for SSE mode. Both libgcc and feraiseexcept rely on x87 mode to accomplish it. This reverts commit 460ee50de054396cc9791ff4cfdc2f5029fb923d. Checked on x86_64.
* x86_64: Add SSE sfp-exceptionsAdhemerval Zanella2020-04-171-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | The exported x86_64 fenv.h functions operate on both i387 and SSE (since they should work on both float, double, and long double) while the internal libc_fe* set either SSE (float, double, and float128) or i387 (long double). The libgcc __sfp_handle_exceptions (used on float128 implementation), however, will set either SEE or i387 exception depending of the exception to raise. This broke the internal assumption of float128 where only SSE operations will be used. This patch reimplements the libgcc __sfp_handle_exceptions to use only SSE operations and sets libgcc to use it instead of its own implementation. And I think we should fix libgcc in a similar manner, since checking on config/i386/64/sfp-machine.h it already only supports SSE rounding mode and x86_64 ABI also expectes float128 to use SSE registers [1] (although it is not clear on how future implementation might implement it). Checked on x86_64-linux-gnu. [1] https://github.com/hjl-tools/x86-psABI/wiki/X86-psABI
* x86: Remove feraiseexcept optimizationAdhemerval Zanella2020-03-302-111/+0
| | | | | | | | | | | | | | Similar to fenvinline.h removal, this kind of optimization is better implemented by the compiler. Also newer code avoid setting exceptions directly (for instance the code to make new logf, log2f and powf implementatation to now support SVID compat). The BZ#94194 [1] the corresponding GCC bug for adding replacements for these on x86. Checked on x86_64-linux-gnu and i686-linux-gnu. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94194
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-031-1/+2
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-0116-16/+16
|
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-0716-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
* Fix location where math-vector-fortran.h is installed.marxin2019-03-071-0/+0
| | | | | | | | | | | | 2019-03-07 Martin Liska <mliska@suse.cz> * math/Makefile: Change location where math-vector-fortran.h is installed. * math/finclude/math-vector-fortran.h: Move from bits/math-vector-fortran.h. * sysdeps/x86/fpu/finclude/math-vector-fortran.h: Move from sysdeps/x86/fpu/bits/math-vector-fortran.h. * scripts/check-installed-headers.sh: Skip Fortran header files. * scripts/check-wrapper-headers.py: Likewise.
* Add some spaces before '('.Joseph Myers2019-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes various places where a space should have been present before '(' in accordance with the GNU Coding Standards. Most but not all of the fixes in this patch are for calls to sizeof (but it's not exhaustive regarding such calls that should be fixed). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-strcpy.c (do_test): Use space before '('. * benchtests/bench-string.h (cmdline_process_function): Likewise. * benchtests/bench-strlen.c (do_test): Likewise. (test_main): Likewise. * catgets/gencat.c (read_old): Likewise. * elf/cache.c (load_aux_cache): Likewise. * iconvdata/bug-iconv8.c (do_test): Likewise. * math/test-tgmath-ret.c (do_test): Likewise. * nis/nis_call.c (rec_dirsearch): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nptl/tst-audit-threads.c (do_test): Likewise. * nptl/tst-cancel4-common.h (set_socket_buffer): Likewise. * nss/nss_test1.c (init): Likewise. * nss/test-netdb.c (test_hosts): Likewise. * posix/execvpe.c (maybe_script_execute): Likewise. * stdio-common/tst-fmemopen4.c (do_test): Likewise. * stdio-common/tst-printf.c (do_test): Likewise. * stdio-common/vfscanf-internal.c (__vfscanf_internal): Likewise. * stdlib/fmtmsg.c (NKEYWORDS): Likewise. * stdlib/qsort.c (STACK_SIZE): Likewise. * stdlib/test-canon.c (do_test): Likewise. * stdlib/tst-swapcontext1.c (do_test): Likewise. * string/memcmp.c (OPSIZ): Likewise. * string/test-strcpy.c (do_test): Likewise. (do_random_tests): Likewise. * string/test-strlen.c (do_test): Likewise. (test_main): Likewise. * string/test-strrchr.c (do_test): Likewise. (do_random_tests): Likewise. * string/tester.c (test_memrchr): Likewise. (test_memchr): Likewise. * sysdeps/generic/memcopy.h (OPSIZ): Likewise. * sysdeps/generic/unwind-dw2.c (execute_stack_op): Likewise. * sysdeps/generic/unwind-pe.h (read_sleb128): Likewise. (read_encoded_value_with_base): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_runtime_setup): Likewise. * sysdeps/hppa/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/ia64/fpu/sfp-machine.h (TI_BITS): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/posix/spawni.c (maybe_script_execute): Likewise. * sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (query_auxv): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/ioperm.c (init_iosys): Likewise. * sysdeps/unix/sysv/linux/csky/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/spawni.c (maybe_script_execute): Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h (FP_XSTATE_MAGIC2_SIZE): Likewise. * sysdeps/x86/fpu/sfp-machine.h (TI_BITS): Likewise. * time/test_time.c (main): Likewise.
* Add new Fortran vector math header file.marxin2019-02-201-0/+43
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-0115-15/+15
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* x86-64: Vectorize sincosf_poly and update s_sincosf-fma.cH.J. Lu2018-12-262-0/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add <sincosf_poly.h> and include it in s_sincosf.h to allow vectorized sincosf_poly. Add x86 sincosf_poly.h to vectorize sincosf_poly. On Broadwell, bench-sincosf shows: Before After Improvement max 160.273 114.198 40% min 6.25 5.625 11% mean 13.0325 10.6462 22% Vectorized sincosf_poly shows Before After Improvement max 138.653 114.198 21% min 5.004 5.625 -11% mean 11.5934 10.6462 9% Tested on x86-64 and i686 as well as with build-many-glibcs.py. * sysdeps/ieee754/flt-32/s_sincosf.h: Include <sincosf_poly.h>. (sincos_t, sincosf_poly, sinf_poly): Moved to ... * sysdeps/ieee754/flt-32/sincosf_poly.h: Here. New file. * sysdeps/x86/fpu/s_sincosf_data.c: New file. * sysdeps/x86/fpu/sincosf_poly.h: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Just include <sysdeps/ieee754/flt-32/s_sincosf.c>.
* Remove x86 mathinline.h.Joseph Myers2018-12-192-295/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | After previous cleanups, the only code in the x86 bits/mathinline.h that is relevant with current compilers is the inline of __ieee754_atan2l that is conditional on __LIBC_INTERNAL_MATH_INLINES (i.e. for when libm itself is being built). This inline is something that does belong in glibc not GCC, since __ieee754_atan2l is a purely internal function name. This patch moves that inline to a new sysdeps/x86/fpu/math_private.h, removing the bits/mathinline.h header. Note that previously the inline was only for non-SSE 32-bit x86. That condition does not make sense, however, for a long double function; if it's not inlined, exactly the same x87 instruction will end up getting used by the out-of-line function, for both 32-bit and 64-bit. So that condition is not retained in the new version. Tested for x86_64 and x86. As expected, installed stripped shared libraries are unchanged for 32-bit x86, but installed stripped libm.so is changed for x86_64 because calls to __ieee754_atan2l start being inlined where previously they were out of line calls. (The same change to start inlining the function would presumably also apply for 32-bit built with -mfpmath=sse, but that's not a configuration I've tested.) * sysdeps/x86/fpu/math_private.h: New file. * sysdeps/x86/fpu/bits/mathinline.h: Remove.
* Remove x86 mathinline.h sinh, cosh, tanh inlines.Joseph Myers2018-12-191-16/+0
| | | | | | | | | | | | | | | | | | | | | | Continuing the removal of bits/mathinline.h inlines that would better be done by the compiler, this patch removes x86 inlines for sinh, cosh and tanh functions (inlines only previously present for fast-math, non-SSE 32-bit x86). I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88556> for adding such inlines as an optimization in GCC. I believe the only remaining part of the x86 bits/mathinline.h that does anything useful with current compilers after this patch is the __LIBC_INTERNAL_MATH_INLINES inline of __ieee754_atan2l; I intend to remove the whole header and move that inline to a sysdeps math_private.h header in a subsequent patch. Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h (sinh): Remove inline definition. (cosh): Likewise. (tanh): Likewise.
* Remove x86 mathinline.h asinh, acosh, atanh inlines.Joseph Myers2018-12-141-13/+0
| | | | | | | | | | | | | | | Continuing the removal of bits/mathinline.h inlines that would better be done by the compiler, this patch removes x86 inlines for asinh, acosh and atanh functions (only for fast-math, non-SSE 32-bit x86). I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88502> for adding such inlines as an optimization in GCC. Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h (asinh): Remove inline definition. (acosh): Likewise. (atanh): Likewise.
* Remove x86 mathinline.h hypot inline.Joseph Myers2018-12-121-4/+0
| | | | | | | | | | | | | Continuing the removal of bits/mathinline.h inlines that would better be done by the compiler, this patch removes an x86 inline for hypot functions (only for fast-math, only for non-SSE 32-bit x86). I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88474> for adding such an inline as an optimization in GCC. Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h (hypot): Remove inline definition.
* Use round functions not __round functions in glibc libm.Joseph Myers2018-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __round functions to call the corresponding round names instead, with asm redirection to __round when the calls are not inlined. An additional complication arises in sysdeps/ieee754/ldbl-128ibm/e_expl.c, where a call to roundl, with the result converted to int, gets converted by the compiler to call lroundl in the case of 32-bit long, so resulting in localplt test failures. It's logically correct to let the compiler make such an optimization; an appropriate asm redirection of lroundl to __lroundl is thus added to that file (it's not needed anywhere else). Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (round): Redirect using MATH_REDIRECT. * sysdeps/aarch64/fpu/s_round.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_roundf.c: Likewise. * sysdeps/ieee754/dbl-64/s_round.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Likewise. * sysdeps/ieee754/float128/s_roundf128.c: Likewise. * sysdeps/ieee754/flt-32/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_round.c: Likewise. * sysdeps/riscv/rvf/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundl.c: Likewise. (round): Redirect to __round. (__roundl): Call round instead of __round. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__round): Remove macro. [_ARCH_PWR5X] (__roundf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Use round functions instead of __round variants. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_expl.c (lroundl): Redirect to __lroundl. (__ieee754_expl): Call roundl instead of __roundl.
* Split fenv_private.h out of math_private.h more consistently.Joseph Myers2018-08-281-0/+497
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some architectures, the parts of math_private.h relating to the floating-point environment are in a separate file fenv_private.h included from math_private.h. As this is purely an architecture-specific convention used by several architectures, however, all such architectures still need their own math_private.h, even if it has nothing to do beyond #include <fenv_private.h> and peculiarity of including the i386 file directly instead of having a shared file in sysdeps/x86. This patch makes the fenv_private.h name an architecture-independent convention in glibc. The include of fenv_private.h from math_private.h becomes architecture-independent (until callers are updated to include fenv_private.h directly so the include from math_private.h is no longer needed). Some architecture math_private.h headers are removed if no longer needed, or renamed to fenv_private.h if all they define belongs in that header; architecture fenv_private.h headers now do require #include_next <fenv_private.h>. The i386 fenv_private.h file moves to sysdeps/x86/fpu/ to reflect how it is actually shared with x86_64. The generic math_private.h gets a new include of <stdbool.h>, as needed for bool in some prototypes in that header (previously that was indirectly included via include/fenv.h, which now only gets included too late in math_private.h, after those prototypes). Tested for x86_64 and x86, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/aarch64/fpu/fenv_private.h: New file. Based on .... * sysdeps/aarch64/fpu/math_private.h: ... this file. All contents moved to fenv_private.h except for ... (TOINT_INTRINSICS): Kept in math_private.h. (roundtoint): Likewise. (converttoint): Likewise. * sysdeps/arm/fenv_private.h: Change multiple-include guard to [ARM_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/arm/math_private.h: Remove. * sysdeps/generic/fenv_private.h: New file. Contents moved from .... * sysdeps/generic/math_private.h: ... this file. Include <stdbool.h>. Do not include <fenv.h> or <get-rounding-mode.h>. Include <fenv_private.h>. Remove functions and macros moved to fenv_private.h. * sysdeps/i386/fpu/math_private.h: Remove. * sysdeps/mips/math_private.h: Move to .... * sysdeps/mips/fpu/fenv_private.h: ... here. Change multiple-include guard to [MIPS_FENV_PRIVATE_H]. Remove [__mips_hard_float] conditional. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/fenv_private.h: Change multiple-include guard to [POWERPC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/math_private.h: Do not include <fenv_private.h>. * sysdeps/riscv/rvf/math_private.h: Move to .... * sysdeps/riscv/rvf/fenv_private.h: ... here. Change multiple-include guard to [RISCV_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/fenv_private.h: Change multiple-include guard to [SPARC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/math_private.h: Remove. * sysdeps/i386/fpu/fenv_private.h: Move to .... * sysdeps/x86/fpu/fenv_private.h: ... here. Change multiple-include guard to [X86_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/x86_64/fpu/math_private.h: Do not include <sysdeps/i386/fpu/fenv_private.h>.
* Move math_check_force_underflow macros to separate math-underflow.h.Joseph Myers2018-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues cleaning up math_private.h by moving the math_check_force_underflow set of macros to a separate header math-underflow.h. This header is included by the files that need it rather than from math_private.h. Moving these macros to a separate file removes the math_private.h uses of macros from float.h, so the inclusion of float.h in math_private.h is also removed; files that were depending on that inclusion are fixed to include float.h directly. The inclusion of math-barriers.h from math_private.h will be removed in a separate patch. Tested for x86_64 and x86. Also tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * math/math-underflow.h: New file. * sysdeps/generic/math_private.h: Do not include <float.h>. (fabs_tg): Remove macro. Moved to math-underflow.h. (min_of_type_f): Likewise. (min_of_type_): Likewise. (min_of_type_l): Likewise. (min_of_type_f128): Likewise. (min_of_type): Likewise. (math_check_force_underflow): Likewise. (math_check_force_underflow_nonneg): Likewise. (math_check_force_underflow_complex): Likewise. * math/e_exp2_template.c: Include <math-underflow.h>. * math/k_casinh_template.c: Likewise. * math/s_catan_template.c: Likewise. * math/s_catanh_template.c: Likewise. * math/s_ccosh_template.c: Likewise. * math/s_cexp_template.c: Likewise. * math/s_clog10_template.c: Likewise. * math/s_clog_template.c: Likewise. * math/s_csin_template.c: Likewise. * math/s_csinh_template.c: Likewise. * math/s_csqrt_template.c: Likewise. * math/s_ctan_template.c: Likewise. * math/s_ctanh_template.c: Likewise. * sysdeps/ieee754/dbl-64/e_asin.c: Likewise. * sysdeps/ieee754/dbl-64/e_atanh.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp2.c: Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c: Likewise. * sysdeps/ieee754/dbl-64/e_hypot.c: Likewise. * sysdeps/ieee754/dbl-64/e_j1.c: Likewise. * sysdeps/ieee754/dbl-64/e_jn.c: Likewise. * sysdeps/ieee754/dbl-64/e_pow.c: Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c: Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c: Likewise. * sysdeps/ieee754/dbl-64/s_atan.c: Likewise. * sysdeps/ieee754/dbl-64/s_erf.c: Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c: Likewise. * sysdeps/ieee754/dbl-64/s_log1p.c: Likewise. * sysdeps/ieee754/dbl-64/s_sin.c: Likewise. * sysdeps/ieee754/dbl-64/s_sincos.c: Likewise. * sysdeps/ieee754/dbl-64/s_tan.c: Likewise. * sysdeps/ieee754/dbl-64/s_tanh.c: Likewise. * sysdeps/ieee754/flt-32/e_asinf.c: Likewise. * sysdeps/ieee754/flt-32/e_atanhf.c: Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c: Likewise. * sysdeps/ieee754/flt-32/e_j1f.c: Likewise. * sysdeps/ieee754/flt-32/e_jnf.c: Likewise. * sysdeps/ieee754/flt-32/e_sinhf.c: Likewise. * sysdeps/ieee754/flt-32/k_sinf.c: Likewise. * sysdeps/ieee754/flt-32/k_tanf.c: Likewise. * sysdeps/ieee754/flt-32/s_asinhf.c: Likewise. * sysdeps/ieee754/flt-32/s_atanf.c: Likewise. * sysdeps/ieee754/flt-32/s_erff.c: Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c: Likewise. * sysdeps/ieee754/flt-32/s_log1pf.c: Likewise. * sysdeps/ieee754/flt-32/s_tanhf.c: Likewise. * sysdeps/ieee754/ldbl-128/e_asinl.c: Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c: Likewise. * sysdeps/ieee754/ldbl-128/e_expl.c: Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c: Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c: Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c: Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c: Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c: Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c: Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c: Likewise. * sysdeps/ieee754/ldbl-128/k_tanl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_asinhl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_atanl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_expm1l.c: Likewise. * sysdeps/ieee754/ldbl-128/s_log1pl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_tanhl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_asinl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_j1l.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_atanl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c: Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c: Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c: Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c: Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c: Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c: Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c: Likewise. * sysdeps/ieee754/ldbl-96/k_sinl.c: Likewise. * sysdeps/ieee754/ldbl-96/k_tanl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_asinhl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_erfl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_tanhl.c: Likewise. * sysdeps/powerpc/fpu/e_hypot.c: Likewise. * sysdeps/x86/fpu/powl_helper.c: Likewise. * sysdeps/ieee754/dbl-64/s_nextup.c: Include <float.h>. * sysdeps/ieee754/flt-32/s_nextupf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_nextupl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nextupl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_nextupl.c: Likewise.
* Move math_opt_barrier, math_force_eval to separate math-barriers.h.Joseph Myers2018-05-091-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues cleaning up math_private.h by moving the math_opt_barrier and math_force_eval macros to a separate header math-barriers.h. At present, those macros are inside a "#ifndef math_opt_barrier" in math_private.h to allow architectures to override them and then use a separate math-barriers.h header, no such #ifndef or #include_next is needed; architectures just have their own alternative version of math-barriers.h when providing their own optimized versions that avoid going through memory unnecessarily. The generic math-barriers.h has a comment added to document these two macros. In this patch, math_private.h is made to #include <math-barriers.h>, so files using these macros do not need updating yet. That is because of uses of math_force_eval in math_check_force_underflow and math_check_force_underflow_nonneg, which are still defined in math_private.h. Once those are moved out to a separate header, that separate header can be made to include <math-barriers.h>, as can the other files directly using these barrier macros, and then the include of <math-barriers.h> from math_private.h can be removed. Tested for x86_64 and x86. Also tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * sysdeps/generic/math-barriers.h: New file. * sysdeps/generic/math_private.h [!math_opt_barrier] (math_opt_barrier): Move to math-barriers.h. [!math_opt_barrier] (math_force_eval): Likewise. * sysdeps/aarch64/fpu/math-barriers.h: New file. * sysdeps/aarch64/fpu/math_private.h (math_opt_barrier): Move to math-barriers.h. (math_force_eval): Likewise. * sysdeps/alpha/fpu/math-barriers.h: New file. * sysdeps/alpha/fpu/math_private.h (math_opt_barrier): Move to math-barriers.h. (math_force_eval): Likewise. * sysdeps/x86/fpu/math-barriers.h: New file. * sysdeps/i386/fpu/fenv_private.h (math_opt_barrier): Move to math-barriers.h. (math_force_eval): Likewise. * sysdeps/m68k/m680x0/fpu/math_private.h: Move to.... * sysdeps/m68k/m680x0/fpu/math-barriers.h: ... here. Adjust multiple-include guard for rename. * sysdeps/powerpc/fpu/math-barriers.h: New file. * sysdeps/powerpc/fpu/math_private.h (math_opt_barrier): Move to math-barriers.h. (math_force_eval): Likewise.
* Remove sysdeps/x86/fpu/bits/mathinline.h __finite inline.Joseph Myers2018-03-161-13/+0
| | | | | | | | | | | | | | | | | | | | | | | Continuing the removals of inline functions from the x86 bits/mathinline.h, this patch removes an inline of __finite (which was not actually architecture-specific at all beyond its endianness-dependence). This inline is not normally used with GCC 4.4 or later, because isfinite now uses __builtin_isfinite except for -fsignaling-nans. Allowing __builtin_isfinite etc. to work properly even for -fsignaling-nans, by implementing versions of those built-in functions that use integer arithmetic in GCC, is <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66462> (a patch was committed but had to be reverted because it caused problems, and that patch didn't address all formats for all architectures, only some, so by itself would not have been sufficient to allow glibc to use __builtin_isfinite unconditionally for new-enough GCC). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC] (__finite): Remove inline function.
* Remove all target specific __ieee754_sqrt(f/l) inlinesWilco Dijkstra2018-03-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now unused target specific__ieee754_sqrt(f/l) inlines. Also remove inlines of sqrt which are for really old GCC versions. Removing these is desirable, under the general principle of leaving such inlining to the compiler rather than trying to do it in installed headers, especially when only very old compilers are affected. Note that removing inlines for __ieee754_sqrt disables inlining in the sqrt wrapper functions. Given the sqrt function will typically only be called for negative arguments, it doesn't matter whether the inlining happens or not. * sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. * sysdeps/s390/fpu/bits/mathinline.h: Remove file. * sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove. (sqrtf): Remove. (sqrtl): Remove. (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove. * sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove. * sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove. * sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove. (__ieee754_sqrtf): Remove. (__ieee754_sqrtl): Remove.
* Remove more old-compilers parts of sysdeps/x86/fpu/bits/mathinline.h.Joseph Myers2018-03-151-183/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes further parts of sysdeps/x86/fpu/bits/mathinline.h that are only of value for optimization with older compiler versions, in accordance with general principles of preferring the let the compiler deal with such inlining through built-in functions. In general, GCC supports inlining all these functions as of version 4.3 or earlier. However, some inlines in GCC may have had excessively restrictive conditions in past GCC versions (e.g. requiring -ffast-math when the inline is valid under broader conditions). (In particular, GCC had, before GCC 7, unnecessarily restrictive conditions on when it could apply floor and ceil inlines corresponding to the ones removed here. The same was true for rint, but bits/mathinline.h *also* was excessively restrictive there.) The removed sincos inlines are for __sincos etc. functions (not a public interface and not currently used in this header either; not in a part of the header ever used for building glibc itself). Likewise, the atan2 inlines included one for __atan2l, also not a public interface and not used for building glibc itself (calls inside glibc generally use __ieee754_atan2l, for which there is a separate __LIBC_INTERNAL_MATH_INLINES case in this header). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [__FAST_MATH__] (__sincos_code): Remove define and undefine. [__FAST_MATH__] (__sincos): Remove inline function. [__FAST_MATH__] (__sincosf): Remove inline function. [__FAST_MATH__] (__sincosl): Remove inline function. (__atan2l): Remove inline functions. [!__GNUC_PREREQ (3, 4)] (__atan2_code): Remove macro. [!__GNUC_PREREQ (3, 4) && __FAST_MATH__] (atan2): Remove inline function. (floor): Remove inline function. (ceil): Likewise. [__FAST_MATH__] (__ldexp_code): Remove macro. [__FAST_MATH__] (ldexp): Remove inline function. [__FAST_MATH__ && __USE_ISOC99] (ldexpf): Likewise. [__FAST_MATH__ && __USE_ISOC99] (ldexpl): Likewise. [__FAST_MATH__ && __USE_ISOC99] (rint): Likewise. [__USE_ISOC99] (__lrint_code): Remove macro. [__USE_ISOC99] (__llrint_code): Likewise. [__USE_ISOC99] (lrintf): Remove inline function. [__USE_ISOC99] (lrint): Likewise. [__USE_ISOC99] (lrintl): Likewise. [__USE_ISOC99] (llrint): Likewise. [__USE_ISOC99] (llrintf): Likewise. [__USE_ISOC99] (llrintl): Likewise.
* Remove old-GCC parts of x86 bits/mathinline.h.Joseph Myers2018-03-141-306/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with the general principle of preferring to let the compiler optimize function calls based on their standard semantics rather than putting inline definitions of such functions in installed headers, this patch removes various such inline definitions in the x86 bits/mathinline.h that were already disabled for GCC 3.5 or later and so were only used with very old compilers (for which good optimization is particularly unimportant); along with those inlines, a definition of __M_SQRT2, which was only used in such inline functions, is also removed. This is similar to an early step in removing the string.h inlines; I intend to follow up with further removals of bits/mathinline.h inline definitions in appropriate logical groups (with GCC bugs filed in cases where GCC doesn't already support corresponding optimizations). Tested for x86_64 and x86. * sysdeps/x86/fpu/bits/mathinline.h [!__GNUC_PREREQ (3, 4)] (lrintf): Remove definitions used only with old GCC. [!__GNUC_PREREQ (3, 4)] (lrint): Likewise. [!__GNUC_PREREQ (3, 4)] (llrintf): Likewise. [!__GNUC_PREREQ (3, 4)] (llrint): Likewise. [!__GNUC_PREREQ (3, 4)] (fmaxf): Likewise. [!__GNUC_PREREQ (3, 4)] (fmax): Likewise. [!__GNUC_PREREQ (3, 4)] (fminf): Likewise. [!__GNUC_PREREQ (3, 4)] (fmin): Likewise. [!__GNUC_PREREQ (3, 4)] (rint): Likewise. [!__GNUC_PREREQ (3, 4)] (rintf): Likewise. [!__GNUC_PREREQ (3, 4)] (nearbyint): Likewise. [!__GNUC_PREREQ (3, 4)] (nearbyintf): Likewise. [!__GNUC_PREREQ (3, 4)] (ceil): Likewise. [!__GNUC_PREREQ (3, 4)] (ceilf): Likewise. [!__GNUC_PREREQ (3, 4)] (floor): Likewise. [!__GNUC_PREREQ (3, 4)] (floorf): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (tan): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (fmod): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (sin): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (cos): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log10): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (asin): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (acos): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 4)] (atan): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log1p): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (logb): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (log2): Likewise. [__FAST_MATH__ && !__GNUC_PREREQ (3, 5)] (drem): Likewise. [__FAST_MATH__] (__M_SQRT2): Remove macro.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-0112-12/+12
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Update x86 fix-fp-int-compare-invalid.h for GCC 8.Joseph Myers2017-10-241-2/+6
| | | | | | | | | | | | | | | | | | The glibc implementation of iseqsig relies on ordered comparison operators raising the "invalid" exception for quiet NaN operands, with a workaround on platforms where a GCC bug means that exception is not raised. For x86, that bug has now been fixed for GCC 8, so this patch disables the workaround in that case. If and when the corresponding bugs for powerpc and s390 are fixed, the headers for those platforms should of course be updated similarly. Tested for x86_64 and x86, including with GCC mainline. Note that other failures appear with GCC mainline because of spurious use of ordered comparison instructions for unordered operations <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82692>. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h (FIX_COMPARE_INVALID): Define to 0 if [__GNUC_PREREQ (8, 0)].
* Remove ancient __signbit inlinesWilco Dijkstra2017-09-281-38/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove __signbit inlines from mathinline.h. Math.h already uses the builtin when supported, so additional inlines are only used on pre 4.0 GCCs. Similarly remove ancient copysign and fabs inlines. * sysdeps/alpha/fpu/bits/mathinline.h: Delete file. * sysdeps/ia64/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/coldfire/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/powerpc/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/s390/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove * sysdeps/sparc/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/tile/bits/mathinline.h: Delete file. * sysdeps/x86/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove.
* Simplify C99 isgreater macrosWilco Dijkstra2017-09-281-93/+0
| | | | | | | | | | | | | | | | Simplify the C99 isgreater macros. Although some support was added in GCC 2.97, not all targets added support until GCC 3.1. Therefore only use the builtins in math.h from GCC 3.1 onwards, and defer to generic macros otherwise. Improve the generic isunordered macro to use compares rather than call fpclassify twice - this is not only faster but also correct for signaling NaNs. * math/math.h: Improve handling of C99 isgreater macros. * sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise. * sysdeps/powerpc/bits/mathinline.h: Likewise. * sysdeps/sparc/fpu/bits/mathinline.h: Likewise. * sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* hurd: fix libm linkSamuel Thibault2017-09-031-1/+1
| | | | | | * sysdeps/x86/fpu/include/bits/fenv.h [NO_HIDDEN]: Redirect __feraiseexcept_renamed to feraiseexcept instead of __GI_feraiseexcept.
* Consistently use uintN_t not u_intN_t in libm.Joseph Myers2017-08-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes libm code to make consistent use of C99 uintN_t types instead of sometimes using those and sometimes using the older nonstandard u_intN_t names. This makes sense as a cleanup in its own right, and also facilitates merges to GCC's libquadmath (which gets the types from stdint.h and so may not have u_intN_t available at all). Tested for x86_64, and with build-many-glibcs.py. * math/s_nextafter.c (__nextafter): Use uintN_t instead of u_intN_t. * math/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/generic/math_private.h (ieee_double_shape_type): Likewise. (ieee_float_shape_type): Likewise. * sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise. * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise. * sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise. (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise. * sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise. * sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise. * sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise. * sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise. * sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise. * sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise. * sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise. * sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise. * sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise. * sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise. * sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf): Likewise. * sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise. * sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise. * sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise. * sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf): Likewise. * sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise. * sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise. * sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise. * sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise. * sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise. * sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise. * sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise. * sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise. * sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise. (__ieee754_y0l): Likewise. (pzero): Likewise. (qzero): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. (__ieee754_y1l): Likewise. (pone): Likewise. (qone): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. (__erfcl): Likewise. * sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise. * sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise. * sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise.
* Add float128 support for x86_64, x86.Joseph Myers2017-06-263-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Avoid localplt issues from x86 fereaiseexcept inline.Joseph Myers2017-06-232-0/+11
| | | | | | | | | | | | | | | | | | | | | | | Building for x86_64 with float128 support, I get a localplt test failure from lrintf128 calling feraiseexcept. The problem is that an inline optimized version of feraiseexcept calls __feraiseexcept_renamed in cases where it doesn't completely expand inline, and that in turn is redirected to feraiseexcept for a library call, so meaning the redirection of feraiseexcept to __GI_feraiseexcept inside libm is lost for that call. This patch fixes the problem by moving the redirect to an internal header in the _LIBC case, with the internal header using __GI_feraiseexcept where appropriate. Tested for x86_64 (in conjunction with float128 patches). * sysdeps/x86/fpu/bits/fenv.h [_LIBC] (__feraiseexcept_renamed): Do not declare. * sysdeps/x86/fpu/include/bits/fenv.h [_LIBC && __USE_EXTERN_INLINES] (__feraiseexcept_renamed): Declare here, redirected to __GI_feraiseexcept if [SHARED && IS_IN (libm)].
* Remove C++ namespace handling from glibc headers.Joseph Myers2017-03-161-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc headers include some code (not particularly consistent or systematic) to put various declarations in C++ namespaces std and __c99, if _GLIBCPP_USE_NAMESPACES is defined. As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>, this macro was removed from libstdc++ in 2000. I don't expect compilation with such old versions of libstdc++ to work with current glibc headers anyway (whereas old *binaries* are expected to stay working with current glibc); this patch (which should be a no-op with any libstdc++ version postdating that removal) removes all this code from the glibc headers. The begin-end-check.pl test, whose comments say it is about checking these namespace macro calls, is also removed. The code in that test would have covered __BEGIN_DECLS / __END_DECLS as well, but if those weren't properly matched it would show up with the check-installed-headers-cxx tests, so I don't think there is an actual use for keeping begin-end-check.pl with the namespace code removed. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro. (__END_NAMESPACE_STD): Likewise. (__USING_NAMESPACE_STD): Likewise. (__BEGIN_NAMESPACE_C99): Likewise. (__END_NAMESPACE_C99): Likewise. (__USING_NAMESPACE_C99): Likewise. * math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and undefine macro. (_Mdouble_END_NAMESPACE): Likewise. * ctype/ctype.h: Do not handle C++ namespaces. * libio/bits/stdio-ldbl.h: Likewise. * libio/stdio.h: Likewise. * locale/locale.h: Likewise. * math/bits/mathcalls.h: Likewise. * setjmp/setjmp.h: Likewise. * signal/signal.h: Likewise. * stdlib/bits/stdlib-float.h: Likewise. * stdlib/bits/stdlib-ldbl.h: Likewise. * stdlib/stdlib.h: Likewise. * string/string.h: Likewise. * sysdeps/x86/fpu/bits/mathinline.h: Likewise. * time/bits/types/clock_t.h: Likewise. * time/bits/types/struct_tm.h: Likewise. * time/bits/types/time_t.h: Likewise. * time/time.h: Likewise. * wcsmbs/bits/wchar-ldbl.h: Likewise. * wcsmbs/uchar.h: Likewise. * wcsmbs/wchar.h: Likewise. [_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition. * wctype/wctype.h: Do not handle C++ namespaces. * scripts/begin-end-check.pl: Remove. * Makefile (installed-headers): Likewise. (tests-special): Do not add $(objpfx)begin-end-check.out. ($(objpfx)begin-end-check.out): Remove.
* Fix test-math-vector-sincos.h aliasing.Joseph Myers2017-03-151-14/+14
| | | | | | | | | | | | | | | | | | | | | x86_64 libmvec tests have been failing to build lately with GCC mainline with -Wuninitialized errors, and Markus Trippelsdorf traced this to an aliasing issue <https://sourceware.org/ml/libc-alpha/2017-03/msg00169.html>. This patch fixes the aliasing issue, so that the vectors-of-pointers are initialized using a union instead of pointer casts. This also fixes the testsuite build failures with GCC mainline. Tested for x86_64 (full testsuite with GCC 6; testsuite build with GCC mainline with build-many-glibcs.py). * sysdeps/x86/fpu/test-math-vector-sincos.h (INIT_VEC_PTRS_LOOP): Use a union when storing pointers. (VECTOR_WRAPPER_fFF_2): Do not take address of integer vector and cast result when passing to INIT_VEC_PTRS_LOOP. (VECTOR_WRAPPER_fFF_3): Likewise. (VECTOR_WRAPPER_fFF_4): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-0111-11/+11
|
* Fix x86_64 -mfpmath=387 float_t, double_t (bug 20787).Joseph Myers2016-11-233-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 20787 reports that, while float_t and double_t for 32-bit x86 properly respect -mfpmath=sse, for x86_64 they fail to reflect -mfpmath=387, which is valid if unusual and results in FLT_EVAL_METHOD being 2. This patch fixes the definitions to respect __FLT_EVAL_METHOD__ in that case, arranging for the test that the types correspond with FLT_EVAL_METHOD to be run with both -mfpmath=387 and -mfpmath=sse. Note: this patch will also have the effect of making float_t and double_t be long double for x86_64 with -mfpmath=sse+387, when FLT_EVAL_METHOD is -1. It seems reasonable for x86_64 to be consistent with 32-bit x86 in this case (and that definition is conservatively safe, in that it makes the types correspond to the widest evaluation format that might be used). Tested for x86-64 and x86. [BZ #20787] * sysdeps/x86/bits/mathdef.h (float_t): Do not define to float if [__x86_64__] when __FLT_EVAL_METHOD__ is nonzero. (double_t): Do not define to double if [__x86_64__] when __FLT_EVAL_METHOD__ is nonzero. * sysdeps/x86/fpu/test-flt-eval-method-387.c: New file. * sysdeps/x86/fpu/test-flt-eval-method-sse.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-flt-eval-method-387 and test-flt-eval-method-sse. [$(subdir) = math] (CFLAGS-test-flt-eval-method-387.c): New variable. [$(subdir) = math] (CFLAGS-test-flt-eval-method-sse.c): Likewise.
* Add iseqsig.Joseph Myers2016-10-061-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Installed header hygiene (BZ#20366): Test of installed headers.Zack Weinberg2016-09-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a test to ensure that the problems fixed in the last several patches do not recur. Each directory checks the headers that it installs for two properties: first, each header must be compilable in isolation, as both C and C++, under a representative combination of language and library conformance levels; second, there is a blacklist of identifiers that may not appear in any installed header, currently consisting of the legacy BSD typedefs. (There is an exemption for the headers that define those typedefs, and for the RPC headers. It may be necessary to make this more sophisticated if we add more stuff to the blacklist in the future.) In order for this test to work correctly, every wrapper header that actually defines something must guard those definitions with #ifndef _ISOMAC. This is the existing mechanism used by the conform/ tests to tell wrapper headers not to define anything that the public header wouldn't, and not to use anything from libc-symbols.h. conform/ only cares for headers that we need to check for standards conformance, whereas this test applies to *every* header. (Headers in include/ that are either installed directly, or are internal-use-only and do *not* correspond to any installed header, are not affected.) * scripts/check-installed-headers.sh: New script. * Rules: In each directory that defines header files to be installed, run check-installed-headers.sh on them as a special test. * Makefile: Likewise for the headers installed at top level. * include/aliases.h, include/alloca.h, include/argz.h * include/arpa/nameser.h, include/arpa/nameser_compat.h * include/elf.h, include/envz.h, include/err.h * include/execinfo.h, include/fpu_control.h, include/getopt.h * include/gshadow.h, include/ifaddrs.h, include/libintl.h * include/link.h, include/malloc.h, include/mcheck.h * include/mntent.h, include/netinet/ether.h * include/nss.h, include/obstack.h, include/printf.h * include/pty.h, include/resolv.h, include/rpc/auth.h * include/rpc/auth_des.h, include/rpc/auth_unix.h * include/rpc/clnt.h, include/rpc/des_crypt.h * include/rpc/key_prot.h, include/rpc/netdb.h * include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h * include/rpc/pmap_rmt.h, include/rpc/rpc.h * include/rpc/rpc_msg.h, include/rpc/svc.h * include/rpc/svc_auth.h, include/rpc/xdr.h * include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h * include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h * include/rpcsvc/ypupd.h, include/shadow.h * include/stdio_ext.h, include/sys/epoll.h * include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h * include/sys/prctl.h, include/sys/profil.h * include/sys/statfs.h, include/sys/sysctl.h * include/sys/sysinfo.h, include/ttyent.h, include/utmp.h * sysdeps/arm/nacl/include/bits/setjmp.h * sysdeps/mips/include/sys/asm.h * sysdeps/unix/sysv/linux/include/sys/sysinfo.h * sysdeps/unix/sysv/linux/include/sys/timex.h * sysdeps/x86/fpu/include/bits/fenv.h: Add #ifndef _ISOMAC guard around internal declarations. Add multiple-inclusion guard if not already present.
* Add femode_t functions.Joseph Myers2016-09-071-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Fixed wrong vector sincos/sincosf ABI to have it compatible withAndrew Senkevich2016-07-011-0/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | current vector function declaration "#pragma omp declare simd notinbranch", according to which vector sincos should have vector of pointers for second and third parameters. It is fixed with implementation as wrapper to version having second and third parameters as pointers. [BZ #20024] * sysdeps/x86/fpu/test-math-vector-sincos.h: New. * sysdeps/x86_64/fpu/multiarch/svml_d_sincos2_core_sse4.S: Fixed ABI of this implementation of vector function. * sysdeps/x86_64/fpu/multiarch/svml_d_sincos4_core_avx2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_sincosf16_core_avx512.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_sincosf4_core_sse4.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_sincosf8_core_avx2.S: Likewise. * sysdeps/x86_64/fpu/svml_d_sincos2_core.S: Likewise. * sysdeps/x86_64/fpu/svml_d_sincos4_core.S: Likewise. * sysdeps/x86_64/fpu/svml_d_sincos4_core_avx.S: Likewise. * sysdeps/x86_64/fpu/svml_d_sincos8_core.S: Likewise. * sysdeps/x86_64/fpu/svml_s_sincosf16_core.S: Likewise. * sysdeps/x86_64/fpu/svml_s_sincosf4_core.S: Likewise. * sysdeps/x86_64/fpu/svml_s_sincosf8_core.S: Likewise. * sysdeps/x86_64/fpu/svml_s_sincosf8_core_avx.S: Likewise. * sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: Use another wrapper for testing vector sincos with fixed ABI. * sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen16-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen4-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8-avx2-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8-wrappers.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx.c: New test. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx512.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx512.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf.c: Likewise. * sysdeps/x86_64/fpu/Makefile: Added new tests.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-049-9/+9
|
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-07-26 01:53:29 +0000