about summary refs log tree commit diff
path: root/sysdeps/x86/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* x86: Test wcscmp RTM in the wcsncmp overflow case [BZ #28896]Noah Goldstein2022-02-181-1/+4
| | | | | | | | | | | In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would call strcmp-avx2 and wcscmp-avx2 respectively. This would have not checks around vzeroupper and would trigger spurious aborts. This commit fixes that. test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on AVX2 machines with and without RTM. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86: Fallback {str|wcs}cmp RTM in the ncmp overflow case [BZ #28896]Noah Goldstein2022-02-171-1/+1
| | | | | | | | | | | | In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would call strcmp-avx2 and wcscmp-avx2 respectively. This would have not checks around vzeroupper and would trigger spurious aborts. This commit fixes that. test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on AVX2 machines with and without RTM. Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
* x86: Add x86-64-vN check to early startupFlorian Weimer2022-01-141-0/+1
| | | | | | | | This ISA level covers the glibc build itself. <dl-hwcap-check.h> cannot be used because this check (by design) happens before DL_PLATFORM_INIT and the x86 CPU flags initialization. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* configure: Allow LD to be LLD 13.0.0 or above [BZ #26558]Fangrui Song2021-08-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | When using LLD (LLVM linker) as the linker, configure prints a confusing message. *** These critical programs are missing or too old: GNU ld LLD>=13.0.0 can build glibc --enable-static-pie. (8.0.0 needs one workaround for -Wl,-defsym=_begin=0. 9.0.0 works with --disable-static-pie). XFAIL two tests sysdeps/x86/tst-ifunc-isa-* which have the BZ #28154 issue (LLD follows the PowerPC port of GNU ld for ifunc by placing IRELATIVE relocations in .rela.dyn, triggering a glibc ifunc fragility). The set of dynamic symbols is the same with GNU ld and LLD, modulo unused SHN_ABS version node symbols. For comparison, gold does not support --enable-static-pie yet (--no-dynamic-linker is unsupported BZ #22221), yet has 6 failures more than LLD. gold linked libc.so has larger .dynsym differences with GNU ld and LLD (non-default version symbols are changed to default versions by a version script BZ #28196).
* x86: Install <bits/platform/x86.h> [BZ #27958]H.J. Lu2021-07-231-1/+1
| | | | | | | | | | | | | | | 1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes <bits/platform/x86.h>. 2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the processor has the feature. 3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the feature is active. There may be other preconditions, like sufficient stack space or further setup for AMX, which must be satisfied before the feature can be used. This fixes BZ #27958. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Fix build and tests with --disable-tunablesSiddhesh Poyarekar2021-07-231-2/+6
| | | | | | | | | | | | | Remove unused code and declare __libc_mallopt when !IS_IN (libc) to allow the debug hook to build with --disable-tunables. Also, run tst-ifunc-isa-2* tests only when tunables are enabled since the result depends on it. Tested on x86_64. Reported-by: Matheus Castanho <msc@linux.ibm.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* dlfcn: Cleanups after -ldl is no longer requiredFlorian Weimer2021-06-031-11/+2
| | | | | | | | | | | | This commit removes the ELF constructor and internal variables from dlfcn/dlfcn.c. The file now serves the same purpose as nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c. The use of libdl-shared-only-routines ensures that libdl.a is empty. This commit adjusts the test suite not to use $(libdl). The libdl.so symbolic link is no longer installed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86: Add string/memory function tests in RTM regionH.J. Lu2021-03-291-0/+23
| | | | | | | | At function exit, AVX optimized string/memory functions have VZEROUPPER which triggers RTM abort. When such functions are called inside a transactionally executing RTM region, RTM abort causes severe performance degradation. Add tests to verify that string/memory functions won't cause RTM abort in RTM region.
* elf: Fix not compiling ifunc tests that need gcc ifunc supportSamuel Thibault2021-03-241-0/+2
|
* Build get-cpuid-feature-leaf.c without stack-protector [BZ #27555]Siddhesh Poyarekar2021-03-151-0/+2
| | | | | | | | | | | | | | | __x86_get_cpuid_feature_leaf is called during early startup, before the stack check guard is initialized and is hence not safe to build with stack-protector. Additionally, IFUNC resolvers for static tst-ifunc-isa tests get called too early for stack protector to be useful, so fix them to disable stack protector for the resolver functions. This fixes all failures seen with --enable-stack-protector=all configuration. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86: Handle _SC_LEVEL1_ICACHE_LINESIZE [BZ #27444]H.J. Lu2021-03-151-0/+8
| | | | | | | | | | | | | | | | | commit 2d651eb9265d1366d7b9e881bfddd46db9c1ecc4 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Sep 18 07:55:14 2020 -0700 x86: Move x86 processor cache info to cpu_features missed _SC_LEVEL1_ICACHE_LINESIZE. 1. Add level1_icache_linesize to struct cpu_features. 2. Initialize level1_icache_linesize by calling handle_intel, handle_zhaoxin and handle_amd with _SC_LEVEL1_ICACHE_LINESIZE. 3. Return level1_icache_linesize for _SC_LEVEL1_ICACHE_LINESIZE. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86: Add PTWRITE feature detection [BZ #27346]H.J. Lu2021-02-071-2/+5
| | | | | | | 1. Add CPUID_INDEX_14_ECX_0 for CPUID leaf 0x14 to detect PTWRITE feature in EBX of CPUID leaf 0x14 with ECX == 0. 2. Add PTWRITE detection to CPU feature tests. 3. Add 2 static CPU feature tests.
* x86: Properly set usable CET feature bits [BZ #26625]H.J. Lu2021-01-291-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | commit 94cd37ebb293321115a36a422b091fdb72d2fb08 Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Sep 16 05:27:32 2020 -0700 x86: Use HAS_CPU_FEATURE with IBT and SHSTK [BZ #26625] broke GLIBC_TUNABLES=glibc.cpu.hwcaps=-IBT,-SHSTK since it can no longer disable IBT nor SHSTK. Handle IBT and SHSTK with: 1. Revert commit 94cd37ebb293321115a36a422b091fdb72d2fb08. 2. Clears the usable CET feature bits if kernel doesn't support CET. 3. Add GLIBC_TUNABLES tests without dlopen. 4. Add tests to verify that CPU_FEATURE_USABLE on IBT and SHSTK matches _get_ssp. 5. Update GLIBC_TUNABLES tests with dlopen to verify that CET is disabled with GLIBC_TUNABLES. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86: Check ifunc resolver with CPU_FEATURE_USABLE [BZ #27072]H.J. Lu2021-01-211-0/+14
| | | | | | | | Check ifunc resolver with CPU_FEATURE_USABLE and tunables in dynamic and static executables to verify that CPUID features are initialized early in static PIE. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* <sys/platform/x86.h>: Remove the C preprocessor magicH.J. Lu2021-01-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In <sys/platform/x86.h>, define CPU features as enum instead of using the C preprocessor magic to make it easier to wrap this functionality in other languages. Move the C preprocessor magic to internal header for better GCC codegen when more than one features are checked in a single expression as in x86-64 dl-hwcaps-subdirs.c. 1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX. 2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h. 3. Remove struct cpu_features and __x86_get_cpu_features from <sys/platform/x86.h>. 4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it in libc. 5. Make __get_cpu_features() private to glibc. 6. Replace __x86_get_cpu_features(N) with __get_cpu_features(). 7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE. 8. Use a single enum index for each CPU feature detection. 9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf. 10. Return zero struct cpuid_feature for the older glibc binary with a smaller CPUID_INDEX_MAX [BZ #27104]. 11. Inside glibc, use the C preprocessor magic so that cpu_features data can be loaded just once leading to more compact code for glibc. 256 bits are used for each CPUID leaf. Some leaves only contain a few features. We can add exceptions to such leaves. But it will increase code sizes and it is harder to provide backward/forward compatibilities when new features are added to such leaves in the future. When new leaves are added, _rtld_global_ro offsets will change which leads to race condition during in-place updates. We may avoid in-place updates by 1. Rename the old glibc. 2. Install the new glibc. 3. Remove the old glibc. NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
* x86: Set header.feature_1 in TCB for always-on CET [BZ #27177]H.J. Lu2021-01-131-0/+6
| | | | | Update dl_cet_check() to set header.feature_1 in TCB when both IBT and SHSTK are always on.
* x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker [BZ #26717]H.J. Lu2021-01-071-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with GNU_PROPERTY_X86_ISA_1_V[234] marker: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by commit b0ab06937385e0ae25cebf1991787d64f439bf12 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 30 06:49:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker and commit 32930e4edbc06bc6f10c435dbcc63131715df678 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Oct 9 05:05:57 2020 -0700 x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the micro-architecture ISA level required to execute the binary. The marker must be added by programmers explicitly in one of 3 ways: 1. Pass -mneeded to GCC. 2. Add the marker in the linker inputs as this patch does. 3. Pass -z x86-64-v[234] to the linker. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker support to ld.so if binutils 2.32 or newer is used to build glibc: 1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] markers to elf.h. 2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234] marker to abi-note.o based on the ISA level used to compile abi-note.o, assuming that the same ISA level is used to compile the whole glibc. 3. Add isa_1 to cpu_features to record the supported x86 ISA level. 4. Rename _dl_process_cet_property_note to _dl_process_property_note and add GNU_PROPERTY_X86_ISA_1_V[234] marker detection. 5. Update _rtld_main_check and _dl_open_check to check loaded objects with the incompatible ISA level. 6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails on lesser platforms. 7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c. Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and x86-64-v4 machines. Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine and got: [hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1 ./elf/tst-isa-level-1: CPU ISA level is lower than required [hjl@gnu-cfl-2 build-x86_64-linux]$
* x86: Harden printf against non-normal long double values (bug 26649)Florian Weimer2020-09-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | The behavior of isnan/__builtin_isnan on bit patterns that do not correspond to something that the CPU would produce from valid inputs is currently under-defined in the toolchain. (The GCC built-in and glibc disagree.) The isnan check in PRINTF_FP_FETCH in stdio-common/printf_fp.c assumes the GCC behavior that returns true for non-normal numbers which are not specified as NaN. (The glibc implementation returns false for such numbers.) At present, passing non-normal numbers to __mpn_extract_long_double causes this function to produce irregularly shaped multi-precision integers, triggering undefined behavior in __printf_fp_l. With GCC 10 and glibc 2.32, this behavior is not visible because __builtin_isnan is used, which avoids calling __mpn_extract_long_double in this case. This commit updates the implementation of __mpn_extract_long_double so that regularly shaped multi-precision integers are produced in this case, avoiding undefined behavior in __printf_fp_l.
* x86: Install <sys/platform/x86.h> [BZ #26124]H.J. Lu2020-09-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Install <sys/platform/x86.h> so that programmers can do #if __has_include(<sys/platform/x86.h>) #include <sys/platform/x86.h> #endif ... if (CPU_FEATURE_USABLE (SSE2)) ... if (CPU_FEATURE_USABLE (AVX2)) ... <sys/platform/x86.h> exports only: enum { COMMON_CPUID_INDEX_1 = 0, COMMON_CPUID_INDEX_7, COMMON_CPUID_INDEX_80000001, COMMON_CPUID_INDEX_D_ECX_1, COMMON_CPUID_INDEX_80000007, COMMON_CPUID_INDEX_80000008, COMMON_CPUID_INDEX_7_ECX_1, /* Keep the following line at the end. */ COMMON_CPUID_INDEX_MAX }; struct cpuid_features { struct cpuid_registers cpuid; struct cpuid_registers usable; }; struct cpu_features { struct cpu_features_basic basic; struct cpuid_features features[COMMON_CPUID_INDEX_MAX]; }; /* Get a pointer to the CPU features structure. */ extern const struct cpu_features *__x86_get_cpu_features (unsigned int max) __attribute__ ((const)); Since all feature checks are done through macros, programs compiled with a newer <sys/platform/x86.h> are compatible with the older glibc binaries as long as the layout of struct cpu_features is identical. The features array can be expanded with backward binary compatibility for both .o and .so files. When COMMON_CPUID_INDEX_MAX is increased to support new processor features, __x86_get_cpu_features in the older glibc binaries returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the new processor feature. No new symbol version is neeeded. Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE can be used to identify processor features. Note: Although GCC has __builtin_cpu_supports, it only supports a subset of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It doesn't support HAS_CPU_FEATURE.
* x86: Remove the unused __x86_prefetchwH.J. Lu2020-07-111-0/+4
| | | | | | | | | | | | | Since commit c867597bff2562180a18da4b8dba89d24e8b65c4 Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Jun 8 13:57:50 2016 -0700 X86-64: Remove previous default/SSE2/AVX2 memcpy/memmove removed the only usage of __x86_prefetchw, we can remove the unused __x86_prefetchw.
* x86: Add --enable-cet=permissiveH.J. Lu2020-05-181-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | When CET is enabled, it is an error to dlopen a non CET enabled shared library in CET enabled application. It may be desirable to make CET permissive, that is disable CET when dlopening a non CET enabled shared library. With the new --enable-cet=permissive configure option, CET is disabled when dlopening a non CET enabled shared library. Add DEFAULT_DL_X86_CET_CONTROL to config.h.in: /* The default value of x86 CET control. */ #define DEFAULT_DL_X86_CET_CONTROL cet_elf_property which enables CET features based on ELF property note. --enable-cet=permissive it to /* The default value of x86 CET control. */ #define DEFAULT_DL_X86_CET_CONTROL cet_permissive which enables CET features permissively. Update tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b to check --enable-cet and --enable-cet=permissive.
* x86: Remove ARCH_CET_LEGACY_BITMAP [BZ #25397]H.J. Lu2020-03-181-3/+6
| | | | | | | | | | | Since legacy bitmap doesn't cover jitted code generated by legacy JIT engine, it isn't very useful. This patch removes ARCH_CET_LEGACY_BITMAP and treats indirect branch tracking similar to shadow stack by removing legacy bitmap support. Tested on CET Linux/x86-64 and non-CET Linux/x86-64. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Call _dl_open_check after relocation [BZ #24259]H.J. Lu2019-07-011-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a workaround for [BZ #20839] which doesn't remove the NODELETE object when _dl_open_check throws an exception. Move it after relocation in dl_open_worker to avoid leaving the NODELETE object mapped without relocation. [BZ #24259] * elf/dl-open.c (dl_open_worker): Call _dl_open_check after relocation. * sysdeps/x86/Makefile (tests): Add tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b. (modules-names): Add tst-cet-legacy-mod-5a, tst-cet-legacy-mod-5b, tst-cet-legacy-mod-5c, tst-cet-legacy-mod-6a, tst-cet-legacy-mod-6b and tst-cet-legacy-mod-6c. (CFLAGS-tst-cet-legacy-5a.c): New. (CFLAGS-tst-cet-legacy-5b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5a.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5c.c): Likewise. (CFLAGS-tst-cet-legacy-6a.c): Likewise. (CFLAGS-tst-cet-legacy-6b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6a.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6c.c): Likewise. ($(objpfx)tst-cet-legacy-5a): Likewise. ($(objpfx)tst-cet-legacy-5a.out): Likewise. ($(objpfx)tst-cet-legacy-mod-5a.so): Likewise. ($(objpfx)tst-cet-legacy-mod-5b.so): Likewise. ($(objpfx)tst-cet-legacy-5b): Likewise. ($(objpfx)tst-cet-legacy-5b.out): Likewise. (tst-cet-legacy-5b-ENV): Likewise. ($(objpfx)tst-cet-legacy-6a): Likewise. ($(objpfx)tst-cet-legacy-6a.out): Likewise. ($(objpfx)tst-cet-legacy-mod-6a.so): Likewise. ($(objpfx)tst-cet-legacy-mod-6b.so): Likewise. ($(objpfx)tst-cet-legacy-6b): Likewise. ($(objpfx)tst-cet-legacy-6b.out): Likewise. (tst-cet-legacy-6b-ENV): Likewise. * sysdeps/x86/tst-cet-legacy-5.c: New file. * sysdeps/x86/tst-cet-legacy-5a.c: Likewise. * sysdeps/x86/tst-cet-legacy-5b.c: Likewise. * sysdeps/x86/tst-cet-legacy-6.c: Likewise. * sysdeps/x86/tst-cet-legacy-6a.c: Likewise. * sysdeps/x86/tst-cet-legacy-6b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5a.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5c.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6a.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6c.c: Likewise.
* x86/CET: Add a re-exec test with legacy bitmapH.J. Lu2018-11-231-2/+5
| | | | | | | | | | Add a re-exec test with legacy bitmap to verify that legacy bitmap is properly hanlded by kernel. * sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1a. (tst-cet-legacy-1a-ARGS): New. ($(objpfx)tst-cet-legacy-1a): New target. * sysdeps/x86/tst-cet-legacy-1a.c: New file.
* Rename the glibc.tune namespace to glibc.cpuSiddhesh Poyarekar2018-08-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc.tune namespace is vaguely named since it is a 'tunable', so give it a more specific name that describes what it refers to. Rename the tunable namespace to 'cpu' to more accurately reflect what it encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since glibc.cpu.cpu is weird. * NEWS: Mention the change. * elf/dl-tunables.list: Rename tune namespace to cpu. * sysdeps/powerpc/dl-tunables.list: Likewise. * sysdeps/x86/dl-tunables.list: Likewise. * sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to cpu.name. * elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust. * elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise. * manual/README.tunables: Likewise. * manual/tunables.texi: Likewise. * sysdeps/powerpc/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86_64/Makefile: Likewise. * sysdeps/x86/dl-cet.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86: Add tst-get-cpu-features-static to $(tests) [BZ #23458]H.J. Lu2018-07-301-1/+1
| | | | | | | | | All tests should be added to $(tests). Reviewed-by: Carlos O'Donell <carlos@redhat.com> [BZ #23458] * sysdeps/x86/Makefile (tests): Add tst-get-cpu-features-static.
* x86/CET: Add tests with legacy non-CET shared objectsH.J. Lu2018-07-251-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check binary compatibility of CET-enabled executables: 1. When CET-enabled executable is used with legacy non-CET shared object at run-time, ld.so should disable SHSTK and put legacy non-CET shared objects in legacy bitmap. 2. When IBT-enabled executable dlopens legacy non-CET shared object, ld.so should put legacy shared object in legacy bitmap. 3. Use GLIBC_TUNABLES=glibc.tune.x86_shstk=[on|off|permissive] to control how SHSTK is enabled. * sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1, tst-cet-legacy-2, tst-cet-legacy-2a, tst-cet-legacy-3, tst-cet-legacy-4, tst-cet-legacy-4a, tst-cet-legacy-4b and tst-cet-legacy-4c. (modules-names): Add tst-cet-legacy-mod-1, tst-cet-legacy-mod-2 and tst-cet-legacy-mod-4. (CFLAGS-tst-cet-legacy-2.c): New. (CFLAGS-tst-cet-legacy-mod-1.c): Likewise. (CFLAGS-tst-cet-legacy-mod-2.c): Likewise. (CFLAGS-tst-cet-legacy-3.c): Likewise. (CFLAGS-tst-cet-legacy-4.c): Likewise. (CFLAGS-tst-cet-legacy-mod-4.c): Likewise. ($(objpfx)tst-cet-legacy-1): Likewise. ($(objpfx)tst-cet-legacy-2): Likewise. ($(objpfx)tst-cet-legacy-2.out): Likewise. ($(objpfx)tst-cet-legacy-2a): Likewise. ($(objpfx)tst-cet-legacy-2a.out): Likewise. ($(objpfx)tst-cet-legacy-4): Likewise. ($(objpfx)tst-cet-legacy-4.out): Likewise. ($(objpfx)tst-cet-legacy-4a): Likewise. ($(objpfx)tst-cet-legacy-4a.out): Likewise. (tst-cet-legacy-4a-ENV): Likewise. ($(objpfx)tst-cet-legacy-4b): Likewise. ($(objpfx)tst-cet-legacy-4b.out): Likewise. (tst-cet-legacy-4b-ENV): Likewise. ($(objpfx)tst-cet-legacy-4c): Likewise. ($(objpfx)tst-cet-legacy-4c.out): Likewise. (tst-cet-legacy-4c-ENV): Likewise. * sysdeps/x86/tst-cet-legacy-1.c: New file. * sysdeps/x86/tst-cet-legacy-2.c: Likewise. * sysdeps/x86/tst-cet-legacy-2a.c: Likewise. * sysdeps/x86/tst-cet-legacy-3.c: Likewise. * sysdeps/x86/tst-cet-legacy-4.c: Likewise. * sysdeps/x86/tst-cet-legacy-4a.c: Likewise. * sysdeps/x86/tst-cet-legacy-4b.c: Likewise. * sysdeps/x86/tst-cet-legacy-4c.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-1.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-2.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-4.c: Likewise.
* x86: Support IBT and SHSTK in Intel CET [BZ #21598]H.J. Lu2018-07-161-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
* x86: Support shadow stack pointer in setjmp/longjmpH.J. Lu2018-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save and restore shadow stack pointer in setjmp and longjmp to support shadow stack in Intel CET. Use feature_1 in tcbhead_t to check if shadow stack is enabled before saving and restoring shadow stack pointer. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>. (_setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>. (setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers): Remove jmp_buf-ssp.sym. * sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/x86/Makefile (gen-as-const-headers): Add jmp_buf-ssp.sym. * sysdeps/x86/jmp_buf-ssp.sym: New dummy file. * sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* x86: Use pad in pthread_unwind_buf to preserve shadow stack registerH.J. Lu2018-05-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pad array in struct pthread_unwind_buf is used by setjmp to save shadow stack register. We assert that size of struct pthread_unwind_buf is no less than offset of shadow stack pointer + shadow stack pointer size. Since functions, like LIBC_START_MAIN, START_THREAD_DEFN as well as these with thread cancellation, call setjmp, but never return after __libc_unwind_longjmp, __libc_unwind_longjmp, which is defined as __libc_longjmp on x86, doesn't need to restore shadow stack register. __libc_longjmp, which is a private interface for thread cancellation implementation in libpthread, is changed to call __longjmp_cancel, instead of __longjmp. __longjmp_cancel is a new internal function in libc, which is similar to __longjmp, but doesn't restore shadow stack register. The compatibility longjmp and siglongjmp in libpthread.so are changed to call __libc_siglongjmp, instead of __libc_longjmp, so that they will restore shadow stack register. Tested with build-many-glibcs.py. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> * nptl/pthread_create.c (START_THREAD_DEFN): Clear previous handlers after setjmp. * setjmp/longjmp.c (__libc_longjmp): Don't define alias if defined. * sysdeps/unix/sysv/linux/x86/setjmpP.h: Include <libc-pointer-arith.h>. (_JUMP_BUF_SIGSET_BITS_PER_WORD): New. (_JUMP_BUF_SIGSET_NSIG): Changed to 96. (_JUMP_BUF_SIGSET_NWORDS): Changed to use ALIGN_UP and _JUMP_BUF_SIGSET_BITS_PER_WORD. * sysdeps/x86/Makefile (sysdep_routines): Add __longjmp_cancel. * sysdeps/x86/__longjmp_cancel.S: New file. * sysdeps/x86/longjmp.c: Likewise. * sysdeps/x86/nptl/pt-longjmp.c: Likewise.
* Remove x86 ifunc-defines.sym and rtld-global-offsets.symH.J. Lu2016-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | Merge x86 ifunc-defines.sym with x86 cpu-features-offsets.sym. Remove x86 ifunc-defines.sym and rtld-global-offsets.sym. No code changes on i686 and x86-64. * sysdeps/i386/i686/multiarch/Makefile (gen-as-const-headers): Remove ifunc-defines.sym. * sysdeps/x86_64/multiarch/Makefile (gen-as-const-headers): Likewise. * sysdeps/i386/i686/multiarch/ifunc-defines.sym: Removed. * sysdeps/x86/rtld-global-offsets.sym: Likewise. * sysdeps/x86_64/multiarch/ifunc-defines.sym: Likewise. * sysdeps/x86/Makefile (gen-as-const-headers): Remove rtld-global-offsets.sym. * sysdeps/x86_64/multiarch/ifunc-defines.sym: Merged with ... * sysdeps/x86/cpu-features-offsets.sym: This. * sysdeps/x86/cpu-features.h: Include <cpu-features-offsets.h> instead of <ifunc-defines.h> and <rtld-global-offsets.h>.
* Run tst-prelink test for GLOB_DAT relocH.J. Lu2015-11-141-15/+0
| | | | | | | | | | | | | | | | | | | | | | | Run tst-prelink test on targets with GLOB_DAT relocaton. * config.make.in (have-glob-dat-reloc): New. * configure.ac (libc_cv_has_glob_dat): New. Set to yes if target supports GLOB_DAT relocaton. AC_SUBST. * configure: Regenerated. * elf/Makefile (tests): Add tst-prelink. (tests-special): Add $(objpfx)tst-prelink-cmp.out. (tst-prelink-ENV): New. ($(objpfx)tst-prelink-conflict.out): Likewise. ($(objpfx)tst-prelink-cmp.out): Likewise. * sysdeps/x86/tst-prelink.c: Moved to ... * elf/tst-prelink.c: Here. * sysdeps/x86/tst-prelink.exp: Moved to ... * elf/tst-prelink.exp: Here. * sysdeps/x86/Makefile (tests): Don't add tst-prelink. (tst-prelink-ENV): Removed. ($(objpfx)tst-prelink-conflict.out): Likewise. ($(objpfx)tst-prelink-cmp.out): Likewise. (tests-special): Don't add $(objpfx)tst-prelink-cmp.out.
* Add a test for prelink outputH.J. Lu2015-11-101-0/+15
| | | | | | | | | | | | | | This test applies to i386 and x86_64 which set R_386_GLOB_DAT and R_X86_64_GLOB_DAT to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA. [BZ #19178] * sysdeps/x86/Makefile (tests): Add tst-prelink. (tst-prelink-ENV): New. ($(objpfx)tst-prelink-conflict.out): Likewise. ($(objpfx)tst-prelink-cmp.out): Likewise. (tests-special): Add $(objpfx)tst-prelink-cmp.out. * sysdeps/x86/tst-prelink.c: New file. * sysdeps/x86/tst-prelink.exp: Likewise.
* Don't disable SSE in x86-64 ld.soH.J. Lu2015-08-261-11/+0
| | | | | | | | | | | | | | | | Since x86-64 ld.so preserves vector registers now, we can use SSE in x86-64 ld.so. We should run tst-ld-sse-use.sh only on i386. * sysdeps/x86/Makefile [$(subdir) == elf] (CFLAGS-.os, tests-special, $(objpfx)tst-ld-sse-use.out): Moved to ... * sysdeps/i386/Makefile [$(subdir) == elf] (CFLAGS-.os, tests-special, $(objpfx)tst-ld-sse-use.out): Here. Update comments. * sysdeps/x86_64/Makefile [$(subdir) == elf] (CFLAGS-.os): Add -mno-mmx for $(all-rtld-routines). * sysdeps/x86/tst-ld-sse-use.sh: Moved to ... * sysdeps/i386/tst-ld-sse-use.sh: Here. Replace x86-64 with i386.
* Add _dl_x86_cpu_features to rtld_globalH.J. Lu2015-08-131-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds _dl_x86_cpu_features to rtld_global in x86 ld.so and initializes it early before __libc_start_main is called so that cpu_features is always available when it is used and we can avoid calling __init_cpu_features in IFUNC selectors. * sysdeps/i386/dl-machine.h: Include <cpu-features.c>. (dl_platform_init): Call init_cpu_features. * sysdeps/i386/dl-procinfo.c (_dl_x86_cpu_features): New. * sysdeps/i386/i686/cacheinfo.c (DISABLE_PREFERRED_MEMORY_INSTRUCTION): Removed. * sysdeps/i386/i686/multiarch/Makefile (aux): Remove init-arch. * sysdeps/i386/i686/multiarch/Versions: Removed. * sysdeps/i386/i686/multiarch/ifunc-defines.sym (KIND_OFFSET): Removed. * sysdeps/i386/ldsodefs.h: Include <cpu-features.h>. * sysdeps/unix/sysv/linux/x86/Makefile (libpthread-sysdep_routines): Remove init-arch. * sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Include <sysdeps/x86_64/dl-procinfo.c> instead of sysdeps/generic/dl-procinfo.c>. * sysdeps/x86/Makefile [$(subdir) == csu] (gen-as-const-headers): Add cpu-features-offsets.sym and rtld-global-offsets.sym. [$(subdir) == elf] (sysdep-dl-routines): Add dl-get-cpu-features. [$(subdir) == elf] (tests): Add tst-get-cpu-features. [$(subdir) == elf] (tests-static): Add tst-get-cpu-features-static. * sysdeps/x86/Versions: New file. * sysdeps/x86/cpu-features-offsets.sym: Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/dl-get-cpu-features.c: Likewise. * sysdeps/x86/libc-start.c: Likewise. * sysdeps/x86/rtld-global-offsets.sym: Likewise. * sysdeps/x86/tst-get-cpu-features-static.c: Likewise. * sysdeps/x86/tst-get-cpu-features.c: Likewise. * sysdeps/x86_64/dl-procinfo.c: Likewise. * sysdeps/x86_64/cacheinfo.c (__cpuid_count): Removed. Assume USE_MULTIARCH is defined and don't check it. (is_intel): Replace __cpu_features with GLRO(dl_x86_cpu_features). (is_amd): Likewise. (max_cpuid): Likewise. (intel_check_word): Likewise. (__cache_sysconf): Don't call __init_cpu_features. (__x86_preferred_memory_instruction): Removed. (init_cacheinfo): Don't call __init_cpu_features. Replace __cpu_features with GLRO(dl_x86_cpu_features). * sysdeps/x86_64/dl-machine.h: <cpu-features.c>. (dl_platform_init): Call init_cpu_features. * sysdeps/x86_64/ldsodefs.h: Include <cpu-features.h>. * sysdeps/x86_64/multiarch/Makefile (aux): Remove init-arch. * sysdeps/x86_64/multiarch/Versions: Removed. * sysdeps/x86_64/multiarch/cacheinfo.c: Likewise. * sysdeps/x86_64/multiarch/init-arch.c: Likewise. * sysdeps/x86_64/multiarch/ifunc-defines.sym (KIND_OFFSET): Removed. * sysdeps/x86_64/multiarch/init-arch.h: Rewrite.
* Run tst-ld-sse-use.sh with bash.Joseph Myers2014-09-291-1/+1
| | | | | | | | | | | | | | tst-ld-sse-use.sh is a bash script, not a POSIX shell script, and so needs to be run with $(BASH) not $(SHELL) to avoid errors of the form: ../sysdeps/x86/tst-ld-sse-use.sh: 41: ../sysdeps/x86/tst-ld-sse-use.sh: declare: not found (when /bin/sh is dash). This patch makes that change. Tested for x86_64. * sysdeps/x86/Makefile ($(objpfx)tst-ld-sse-use.out): Run script with $(BASH) not $(SHELL).
* Enhance tst-xmmymm.sh to detect zmm register usage in ld.so (BZ #16194)Siddhesh Poyarekar2014-09-121-2/+2
| | | | | | | | | | | | | | | | 2d63a517e4084ec80403cd9f278690fa8b676cc4 added support to save and restore zmm register in the dynamic linker, but did not enhance test-xmmymm.sh to detect accidental usage of these registers. The patch below adds that check. The script has also been renamed to tst-ld-sse-use.sh. To see the minimal changes, run `git show -M`. [BZ #16194] * sysdeps/x86/tst-xmmymm.sh: Rename file to... * sysdeps/x86/tst-ld-sse-use.sh: ... this. Check for zmm register usage. * sysdeps/x86/Makefile: Adjust.
* Enumerate tests with special rules in tests-special variable.Joseph Myers2014-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
* Generate .test-result files for tests with special rules.Joseph Myers2014-02-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
* Use configured $(NM), $(OBJDUMP), $(READELF) in tst-xmmymm.sh.Joseph Myers2012-11-081-1/+1
|
* Also run tst-xmmymm.sh on i386 ld.soH.J. Lu2012-11-071-0/+5
|
* Compile x86 rtld with -mno-sse -mno-mmxH.J. Lu2012-11-021-0/+4
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-07 01:08:08 +0000