| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Needed since gcc-10 enabled -fno-common by default.
[In use in Gentoo since gcc-10, no problems observed.
Also discussed with and reviewed by Jessica Clarke from
Debian. Andreas]
Bug: https://bugs.gentoo.org/723268
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 5f828ff824e3b7cd1 ("io: Fix F_GETLK, F_SETLK, and F_SETLKW for
powerpc64") fixed an issue with the value of the lock constants on
powerpc64 when not using __USE_FILE_OFFSET64, but it ended-up also
changing the value when using __USE_FILE_OFFSET64 causing an API change.
Fix that by also checking that define, restoring the pre
4d0fe291aed3a476a commit values:
Default values:
- F_GETLK: 5
- F_SETLK: 6
- F_SETLKW: 7
With -D_FILE_OFFSET_BITS=64:
- F_GETLK: 12
- F_SETLK: 13
- F_SETLKW: 14
At the same time, it has been noticed that there was no test for io lock
with __USE_FILE_OFFSET64, so just add one.
Tested on x86_64-linux-gnu, i686-linux-gnu and
powerpc64le-unknown-linux-gnu.
Resolves: BZ #30804.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Returning a pidfd allows a process to keep a race-free handle for a
child process, otherwise, the caller will need to either use pidfd_open
(which still might be subject to TOCTOU) or keep the old racy interface
base on pid_t.
To correct use pifd_spawn, the kernel must support not only returning
the pidfd with clone/clone3 but also waitid (P_PIDFD) (added on Linux
5.4). If kernel does not support the waitid, pidfd return ENOSYS.
It avoids the need to racy workarounds, such as reading the procfs
fdinfo to get the pid to use along with other wait interfaces.
These interfaces are similar to the posix_spawn and posix_spawnp, with
the only difference being it returns a process file descriptor (int)
instead of a process ID (pid_t). Their prototypes are:
int pidfd_spawn (int *restrict pidfd,
const char *restrict file,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict],
char *const envp[restrict])
int pidfd_spawnp (int *restrict pidfd,
const char *restrict path,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict_arr],
char *const envp[restrict_arr]);
A new symbol is used instead of a posix_spawn extension to avoid
possible issues with language bindings that might track the return
argument lifetime. Although on Linux pid_t and int are interchangeable,
POSIX only states that pid_t should be a signed integer.
Both symbols reuse the posix_spawn posix_spawn_file_actions_t and
posix_spawnattr_t, to void rehash posix_spawn API or add a new one. It
also means that both interfaces support the same attribute and file
actions, and a new flag or file action on posix_spawn is also added
automatically for pidfd_spawn.
Also, using posix_spawn plumbing allows the reusing of most of the
current testing with some changes:
- waitid is used instead of waitpid since it is a more generic
interface.
- tst-posix_spawn-setsid.c is adapted to take into consideration that
the caller can check for session id directly. The test now spawns
itself and writes the session id as a file instead.
- tst-spawn3.c need to know where pidfd_spawn is used so it keeps an
extra file description unused.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These functions allow to posix_spawn and posix_spawnp to use
CLONE_INTO_CGROUP with clone3, allowing the child process to
be created in a different cgroup version 2. These are GNU
extensions that are available only for Linux, and also only
for the architectures that implement clone3 wrapper
(HAVE_CLONE3_WRAPPER).
To create a process on a different cgroupv2, one can use the:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_SETCGROUP);
posix_spawnattr_setcgroup_np (&attr, cgroup);
posix_spawn (...)
Similar to other posix_spawn flags, POSIX_SPAWN_SETCGROUP control
whether the cgroup file descriptor will be used or not with
clone3.
There is no fallback if either clone3 does not support the flag
or if the architecture does not provide the clone3 wrapper, in
this case posix_spawn returns EOPNOTSUPP.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
| |
Not all architectures added clone3 syscall.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
|
| |
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on mips64el-linux-gnueabihf, mips64el-n32-linux-gnu, and
mipsel-linux-gnu.
|
|
|
|
|
|
|
|
|
| |
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on arm-linux-gnueabihf.
|
|
|
|
|
|
|
| |
We are requiring Binutils >= 2.41, so explicit relocation syntax is
always supported by the assembler. Use it to reduce one instruction.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
|
|
|
|
|
|
|
|
| |
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
| |
The path auxv[*].a_val could either be an integer or a string,
depending on the a_type value. Use a separate field, a_val_string, to
simplify mechanical parsing of the --list-diagnostics output.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
| |
Thanks to Andreas Schwab for reporting.
Fixes: 652b9fdb77d9fd056d4dd26dad2c14142768ab49
Signed-off-by: Sam James <sam@gentoo.org>
|
|
|
|
|
|
|
|
|
| |
SYS_modify_ldt requires CONFIG_MODIFY_LDT_SYSCALL to be set in the kernel, which
some distributions may disable for hardening. Check if that's the case (unset)
and mark the test as UNSUPPORTED if so.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
|
|
|
|
|
|
|
|
| |
All callers pass 1 or 0x11 anyway (same meaning according to man page),
but still.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
|
|
|
|
|
|
| |
strlen-lasx is implemeted by LASX simd instructions(256bit)
strlen-lsx is implemeted by LSX simd instructions(128bit)
strlen-align is implemented by LA basic instructions and never use unaligned memory acess
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Linux 6.4 adds new constants PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG
and PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG. Add those to all
relevant sys/ptrace.h headers, along with adding the associated
argument structure to bits/ptrace-shared.h (named struct
__ptrace_sud_config there following the usual convention for such
structures).
Tested for x86_64 and with build-many-glibcs.py.
|
|
|
|
|
|
|
| |
Linux 6.4 adds a new constant PACKET_VNET_HDR_SZ; add it to glibc's
netpacket/packet.h.
Tested for x86_64.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
| |
Linux 6.4 adds a new constant IP_PROTOCOL; add it to glibc's
bits/in.h.
Tested for x86_64.
|
|
|
|
|
|
|
|
|
| |
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.4. (There are no new
constants covered by these tests in 6.4 that need any other header
changes.)
Tested with build-many-glibcs.py.
|
|
|
|
|
|
|
|
|
|
|
| |
This patch enables the option to influence hwcaps used by PowerPC.
The environment variable, GLIBC_TUNABLES=glibc.cpu.hwcaps=-xxx,yyy,-zzz....,
can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature xxx
and zzz, where the feature name is case-sensitive and has to match the ones
mentioned in the file{sysdeps/powerpc/dl-procinfo.c}.
Note that the hwcap tunables only used in the IFUNC selection.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
On __convert_scm_timestamps GCC 6 issues an warning that tvts[0]/tvts[1]
maybe be used uninitialized, however it would be used if type is set to a
value different than 0 (done by either COMPAT_SO_TIMESTAMP_OLD or
COMPAT_SO_TIMESTAMPNS_OLD) which will fallthrough to 'common' label.
It does not show with gcc 7 or more recent versions.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Starting with commit 2c6b4b272e6b4d07303af25709051c3e96288f2d
"nptl: Unconditionally use a 32-byte rseq area", the testcase
misc/tst-rseq-disable is UNSUPPORTED as RSEQ_SIG is not defined.
The mentioned commit removes inclusion of sys/rseq.h in nptl/descr.h.
Thus just include sys/rseq.h in the tst-rseq-disable.c as also done
in tst-rseq.c and tst-rseq-nptl.c.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
|
|
|
| |
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on s390x-linux-gnu and s390-linux-gnu.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines. Log lookup table
added as HIDDEN symbol to allow it to be shared between AdvSIMD and
SVE variants.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
|
|
|
|
|
|
| |
Linux 6.4 adds the riscv_hwprobe syscall on riscv and enables
memfd_secret on s390. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Trying to mount procfs can fail due multiples reasons: proc is locked
due the container configuration, mount syscall is filtered by a
Linux Secuirty Module, or any other security or hardening mechanism
that Linux might eventually add.
The tests does require a new procfs without binding to parent, and
to fully fix it would require to change how the container was created
(which is out of the scope of the test itself). Instead of trying to
foresee any possible scenario, if procfs can not be mount fail with
unsupported.
Checked on aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
| |
The tst-ttyname-direct.c checks the ttyname with procfs mounted in
bind mode (MS_BIND|MS_REC), while tst-ttyname-namespace.c checks
with procfs mount with MS_NOSUID|MS_NOEXEC|MS_NODEV in a new
namespace.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
| |
It fixes the x32 build failure introduced by 45e2483a6c.
Checked on a x86_64-linux-gnu-x32 build.
|
|
|
|
|
|
| |
Use malloc rather than alloca to avoid potential stack overflow.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
| |
Use scratch_buffer and malloc rather than alloca to avoid potential stack
overflows.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
| |
These files could be useful to any port that wants to use ld.so.cache.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
| |
Few tests needed to properly check for asprintf and system calls return
values with _FORTIFY_SOURCE enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
| |
Replace alloca with a scratch_buffer to avoid potential stack overflows.
Message-Id: <20230613191631.1080455-1-josimmon@redhat.com>
|
|
|
|
|
|
|
| |
These functions are about to be added to POSIX, under Austin Group
issue 986.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
|
| |
These functions are about to be added to POSIX, under Austin Group
issue 986.
The fortified strlcat implementation does not raise SIGABRT if the
destination buffer does not contain a null terminator, it just
inherits the non-failing regular strlcat behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Container management default seccomp filter [1] only accepts
personality(2) with PER_LINUX, (0x0), UNAME26 (0x20000),
PER_LINUX32 (0x8), UNAME26 | PER_LINUX32, and 0xffffffff (to query
current personality)
Although the documentation only state it is blocked to prevent
'enabling BSD emulation' (PER_BSD, not implemented by Linux), checking
on repository log the real reason is to block ASLR disable flag
(ADDR_NO_RANDOMIZE) and other poorly support emulations.
So handle EPERM and fail as UNSUPPORTED if we can really check for
BZ#19408.
Checked on aarch64-linux-gnu.
[1] https://github.com/moby/moby/blob/master/profiles/seccomp/default.json
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
|
|
|
|
|
| |
As suggested in
<https://sourceware.org/pipermail/libc-alpha/2023-February/145890.html>,
remove the MAP_VARIABLE define from the hppa bits/mman.h, for
consistency with Linux 6.2 which removed the define there.
Tested with build-many-glibcs.py for hppa-linux-gnu.
|
|
|
|
|
| |
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
|
| |
epoll_pwait2(2)'s second argument should be nonnull. We're going to add
__nonnull to the prototype, so let's fix the test accordingly. We can
use a dummy variable to avoid passing NULL.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
|
|
|
|
| |
Use a scratch_buffer rather than alloca to avoid potential stack
overflows.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
| |
Use a scratch_buffer rather than alloca to avoid potential stack
overflows.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Different than other 64 bit architectures, powerpc64 defines the
LFS POSIX lock constants with values similar to 32 ABI, which
are meant to be used with fcntl64 syscall. Since powerpc64 kABI
does not have fcntl, the constants are adjusted with the
FCNTL_ADJUST_CMD macro.
The 4d0fe291aed3a476a changed the logic of generic constants
LFS value are equal to the default values; which is now wrong
for powerpc64.
Fix the value by explicit define the previous glibc constants
(powerpc64 does not need to use the 32 kABI value, but it simplifies
the FCNTL_ADJUST_CMD which should be kept as compatibility).
Checked on powerpc64-linux-gnu and powerpc-linux-gnu.
|