about summary refs log tree commit diff
path: root/sysdeps/unix
Commit message (Collapse)AuthorAgeFilesLines
* Add PF_XDP, AF_XDP and SOL_XDP from Linux 4.18 to bits/socket.h.Tobias Klauser2018-08-211-1/+4
| | | | | | | | | | This patch adds the PF_XDP, AF_XDP and SOL_XDP macros from Linux 4.18 to sysdeps/unix/sysv/linux/bits/socket.h. * sysdeps/unix/sysv/linux/bits/socket.h (PF_MAX): Set to 45. (PF_XDP): New macro. (AF_XDP): New macro. (SOL_XDP): New macro.
* Avoid running some tests if the file system does not support holesFlorian Weimer2018-08-211-0/+2
| | | | | Otherwise, these tests fills up the entire disk (or just run very slowly and eventually time out).
* __readlink_chk: Remove micro-optimizationFlorian Weimer2018-08-211-33/+0
|
* __readlink_chk: Assume HAVE_INLINED_SYSCALLSFlorian Weimer2018-08-201-7/+1
| | | | | HAVE_INLINED_SYSCALLS is always defined on Linux. Switch to INLINE_SYSCALL_CALL as well.
* Update struct signalfd_siginfo from Linux 4.18.Joseph Myers2018-08-201-1/+6
| | | | | | | | | | | | | This patch updates struct signalfd_siginfo in sys/signalfd.h with new members from Linux 4.18 (plus ssi_addr_lsb, added to the kernel in 2.6.37 without being added to sys/signalfd.h at that time). The __pad2 member name follows the kernel and the existing __pad name. Tested for x86_64. * sysdeps/unix/sysv/linux/sys/signalfd.h (struct signalfd_siginfo): Add ssi_addr_lsb, ssi_syscall, ssi_call_addr and ssi_arch members.
* Update syscall-names.list for Linux 4.18.Joseph Myers2018-08-131-2/+4
| | | | | | | | | | | | | This patch updates sysdeps/unix/sysv/linux/syscall-names.list for Linux 4.18. The io_pgetevents and rseq syscalls are added to the kernel on various architectures, so need to be mentioned in this file. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 4.18. (io_pgetevents): New syscall. (rseq): Likewise.
* Linux: Rewrite __old_getdents64 [BZ #23497]Florian Weimer2018-08-103-25/+176
| | | | | | | | | Commit 298d0e3129c0b5137f4989275b13fe30d0733c4d ("Consolidate Linux getdents{64} implementation") broke the implementation because it does not take into account struct offset differences. The new implementation is close to the old one, before the consolidation, but has been cleaned up slightly.
* S390: Implement 64-bit __fentry__Ilya Leoshkevich2018-08-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Since __fentry__ is almost the same as _mcount, reuse the code by #including it twice with different #defines around. * Remove LA usages - they are needed in 31-bit mode to clear the top bit, but in 64-bit they appear to do nothing. * Add CFI rule for the nonstandard return register. This rule applies to the current function (binutils generates a new CIE - see gas/dw2gencfi.c:select_cie_for_fde()), so it is not necessary to put __fentry__ into a new file. * Fix CFI offset for %r14. * Add CFI rule for %r0. * Fix unwound value of %r15 being off by 244 bytes. * Unwinding in __fentry__@plt does not work, no plan to fix it - it would require asking linker to generate CFI for return address in %r0. From functional perspective keeping it broken is fine, since the callee did not have a chance to do anything yet. From convenience perspective it would be possible to enhance GDB in the future to treat __fentry__@plt in a special way. * Fix whitespace. * Fix offsets in comments, which were copied from 32-bit code. * 32-bit version will not be implemented, since it's not compatible with the corresponding PLT stubs: they assume %r12 points to GOT, which is not the case for gcc-emitted __fentry__ stub, which runs before the prolog. This patch adds the runtime support in glibc for the -mfentry gcc feature introduced in [1] and [2]. [1] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00784.html [2] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00912.html ChangeLog: * sysdeps/s390/s390-64/Versions (__fentry__): Add. * sysdeps/s390/s390-64/s390x-mcount.S: Move the common code to s390x-mcount.h and #include it. * sysdeps/s390/s390-64/s390x-mcount.h: New file. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (__fentry__): Add.
* Rename the glibc.tune namespace to glibc.cpuSiddhesh Poyarekar2018-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc.tune namespace is vaguely named since it is a 'tunable', so give it a more specific name that describes what it refers to. Rename the tunable namespace to 'cpu' to more accurately reflect what it encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since glibc.cpu.cpu is weird. * NEWS: Mention the change. * elf/dl-tunables.list: Rename tune namespace to cpu. * sysdeps/powerpc/dl-tunables.list: Likewise. * sysdeps/x86/dl-tunables.list: Likewise. * sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to cpu.name. * elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust. * elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise. * manual/README.tunables: Likewise. * manual/tunables.texi: Likewise. * sysdeps/powerpc/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86_64/Makefile: Likewise. * sysdeps/x86/dl-cet.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86/CET: Fix property note parser [BZ #23467]H.J. Lu2018-07-304-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | GNU_PROPERTY_X86_FEATURE_1_AND may not be the first property item. We need to check each property item until we reach the end of the property or find GNU_PROPERTY_X86_FEATURE_1_AND. This patch adds 2 tests. The first test checks if IBT is enabled and the second test reads the output from the first test to check if IBT is is enabled. The second second test fails if IBT isn't enabled properly. Reviewed-by: Carlos O'Donell <carlos@redhat.com> [BZ #23467] * sysdeps/unix/sysv/linux/x86/Makefile (tests): Add tst-cet-property-1 and tst-cet-property-2 if CET is enabled. (CFLAGS-tst-cet-property-1.o): New. (ASFLAGS-tst-cet-property-dep-2.o): Likewise. ($(objpfx)tst-cet-property-2): Likewise. ($(objpfx)tst-cet-property-2.out): Likewise. * sysdeps/unix/sysv/linux/x86/tst-cet-property-1.c: New file. * sysdeps/unix/sysv/linux/x86/tst-cet-property-2.c: Likewise. * sysdeps/unix/sysv/linux/x86/tst-cet-property-dep-2.S: Likewise. * sysdeps/x86/dl-prop.h (_dl_process_cet_property_note): Parse each property item until GNU_PROPERTY_X86_FEATURE_1_AND is found.
* Fix Linux fcntl OFD locks on unsupported kernelsAdhemerval Zanella2018-07-272-2/+12
| | | | | | | | | | | This patch make the OFD tests return unsupported if kernel does not support OFD locks (it was added on 3.15). Checked on a ia64-linux-gnu with Linux 3.14. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: Return unsupported if kernel does not support OFD locks. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* ia64: Work around incorrect type of IA64 uc_sigmaskH.J. Lu2018-07-251-0/+26
| | | | | | | | Work around: https://sourceware.org/bugzilla/show_bug.cgi?id=21634 * sysdeps/unix/sysv/linux/ia64/tst-setcontext4.c: New file.
* x86/CET: Add a setcontext test for CETH.J. Lu2018-07-252-0/+134
| | | | | | | | | | Verify that setcontext works with gaps above and below the newly allocated shadow stack. * sysdeps/unix/sysv/linux/x86/Makefile (tests): Add tst-cet-setcontext-1 if CET is enabled. (CFLAGS-tst-cet-setcontext-1.c): Add -mshstk. * sysdeps/unix/sysv/linux/x86/tst-cet-setcontext-1.c: New file.
* x86-64/CET: Extend ucontext_t to save shadow stackH.J. Lu2018-07-258-1/+391
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a field to ucontext_t to save shadow stack: 1. getcontext and swapcontext are updated to save the caller's shadow stack pointer and return addresses. 2. setcontext and swapcontext are updated to restore shadow stack and jump to new context directly. 3. makecontext is updated to allocate a new shadow stack and set the caller's return address to __start_context. Since makecontext allocates a new shadow stack when making a new context and kernel allocates a new shadow stack for clone/fork/vfork syscalls, we track the current shadow stack base. In setcontext and swapcontext, if the target shadow stack base is the same as the current shadow stack base, we unwind the shadow stack. Otherwise it is a stack switch and we look for a restore token. We enable shadow stack at run-time only if program and all used shared objects, including dlopened ones, are shadow stack enabled, which means that they must be compiled with GCC 8 or above and glibc 2.28 or above. We need to save and restore shadow stack only if shadow stack is enabled. When caller of getcontext, setcontext, swapcontext and makecontext is compiled with smaller ucontext_t, shadow stack won't be enabled at run-time. We check if shadow stack is enabled before accessing the extended field in ucontext_t. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Add __ssp. * sysdeps/unix/sysv/linux/x86_64/__start_context.S: Include <asm/prctl.h> and "ucontext_i.h" when shadow stack is enabled. (__push___start_context): New. * sysdeps/unix/sysv/linux/x86_64/getcontext.S: Include <asm/prctl.h>. (__getcontext): Record the current shadow stack base. Save the caller's shadow stack pointer and base. * sysdeps/unix/sysv/linux/x86_64/makecontext.c: Include <pthread.h>, <libc-pointer-arith.h> and <sys/prctl.h>. (__push___start_context): New prototype. (__makecontext): Call __push___start_context to allocate a new shadow stack, push __start_context onto the new stack as well as the new shadow stack. * sysdeps/unix/sysv/linux/x86_64/setcontext.S: Include <asm/prctl.h>. (__setcontext): Restore the target shadow stack. * sysdeps/unix/sysv/linux/x86_64/swapcontext.S: Include <asm/prctl.h>. (__swapcontext): Record the current shadow stack base. Save the caller's shadow stack pointer and base. Restore the target shadow stack. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (STACK_SIZE_TO_SHADOW_STACK_SIZE_SHIFT): New. * sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym (oSSP): New.
* alpha: mlock2, copy_file_range syscalls were introduced in kernel 4.13Florian Weimer2018-07-241-1/+3
|
* x86/CET: Extend arch_prctl syscall for CET controlH.J. Lu2018-07-243-6/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CET arch_prctl bits should be defined in <asm/prctl.h> from Linux kernel header files. Add x86 <include/asm/prctl.h> for pre-CET kernel header files. Note: sysdeps/unix/sysv/linux/x86/include/asm/prctl.h should be removed if <asm/prctl.h> from the required kernel header files contains CET arch_prctl bits. /* CET features: IBT: GNU_PROPERTY_X86_FEATURE_1_IBT SHSTK: GNU_PROPERTY_X86_FEATURE_1_SHSTK */ /* Return CET features in unsigned long long *addr: features: addr[0]. shadow stack base address: addr[1]. shadow stack size: addr[2]. */ # define ARCH_CET_STATUS 0x3001 /* Disable CET features in unsigned int features. */ # define ARCH_CET_DISABLE 0x3002 /* Lock all CET features. */ # define ARCH_CET_LOCK 0x3003 /* Allocate a new shadow stack with unsigned long long *addr: IN: requested shadow stack size: *addr. OUT: allocated shadow stack address: *addr. */ # define ARCH_CET_ALLOC_SHSTK 0x3004 /* Return legacy region bitmap info in unsigned long long *addr: address: addr[0]. size: addr[1]. */ # define ARCH_CET_LEGACY_BITMAP 0x3005 Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/unix/sysv/linux/x86/include/asm/prctl.h: New file. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Include <sys/prctl.h> and <asm/prctl.h>. (get_cet_status): Call arch_prctl with ARCH_CET_STATUS. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Include <sys/prctl.h> and <asm/prctl.h>. (dl_cet_allocate_legacy_bitmap): Call arch_prctl with ARCH_CET_LEGACY_BITMAP. (dl_cet_disable_cet): Call arch_prctl with ARCH_CET_DISABLE. (dl_cet_lock_cet): Call arch_prctl with ARCH_CET_LOCK. * sysdeps/x86/libc-start.c: Include <startup.h>.
* sh: Do not define __ASSUME_STATXFlorian Weimer2018-07-241-0/+3
|
* nptl: Add abilist symbols for C11 threadsAdhemerval Zanella2018-07-2449-0/+587
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the required abilist symbols for C11 thread support. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (thrd_current, thrd_equal, thrd_sleep, thrd_yield): Add C11 thread symbols. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist [[GLIBC_2.28] (call_once, cnd_broadcast, cnd_destroy, cnd_init, cnd_signal, cnd_timedwait, cnd_wait, mtx_destroy, mtx_init, mtx_lock, mtx_timedlock, mtx_trylock, mtx_unlokc, thrd_create, thrd_detach, thrd_exit, thrd_join, tss_create, tss_delete, tss_get, tss_set): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist: Likewise. ikewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist: * sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist: Likewise.
* nptl: Add C11 threads thrd_* functionsAdhemerval Zanella2018-07-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types. Mostly of the definitions are composed based on POSIX conterparts, such as thrd_t (using pthread_t). For thrd_* function internally direct POSIX pthread call are used with the exceptions: 1. thrd_start uses pthread_create internal implementation, but changes how to actually calls the start routine. This is due the difference in signature between POSIX and C11, where former return a 'void *' and latter 'int'. To avoid calling convention issues due 'void *' to int cast, routines from C11 threads are started slight different than default pthread one. Explicit cast to expected return are used internally on pthread_create and the result is stored back to void also with an explicit cast. 2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering errno and to handle expected standard return codes. It is a cancellation entrypoint to be consistent with both thrd_join and cnd_{timed}wait. 3. thrd_yield also uses internal direct syscall to avoid errno clobbering. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/Makefile (conformtest-headers-ISO11): Add threads.h. (linknamespace-libs-ISO11): Add libpthread.a. * conform/data/threads.h-data: New file: add C11 thrd_* types and functions. * include/stdc-predef.h (__STDC_NO_THREADS__): Remove definition. * nptl/Makefile (headers): Add threads.h. (libpthread-routines): Add new C11 thread thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and thrd_yield. * nptl/Versions (libpthread) [GLIBC_2.28]): Add new C11 thread thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and thrd_yield symbols. * nptl/descr.h (struct pthread): Add c11 field. * nptl/pthreadP.h (ATTR_C11_THREAD): New define. * nptl/pthread_create.c (START_THREAD_DEFN): Call C11 thread start routine with expected function prototype. (__pthread_create_2_1): Add C11 threads check based on attribute value. * sysdeps/unix/sysdep.h (INTERNAL_SYSCALL_CANCEL): New macro. * nptl/thrd_create.c: New file. * nptl/thrd_current.c: Likewise. * nptl/thrd_detach.c: Likewise. * nptl/thrd_equal.c: Likewise. * nptl/thrd_exit.c: Likewise. * nptl/thrd_join.c: Likewise. * nptl/thrd_priv.h: Likewise. * nptl/thrd_sleep.c: Likewise. * nptl/thrd_yield.c: Likewise. * include/threads.h: Likewise.
* x86: Update vfork to pop shadow stackH.J. Lu2018-07-242-0/+95
| | | | | | | | | | | | | | | | | | | | | The shadow stack prevents us from pushing the saved return PC onto the stack and returning normally. Instead we pop the shadow stack and return directly. This is the safest way to return and ensures any stack manipulations done by the vfork'd child doesn't cause the parent to terminate when CET is enabled. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/unix/sysv/linux/i386/vfork.S (SYSCALL_ERROR_HANDLER): Redefine if shadow stack is enabled. (SYSCALL_ERROR_LABEL): Likewise. (__vfork): Pop shadow stack and jump back to to caller directly when shadow stack is in use. * sysdeps/unix/sysv/linux/x86_64/vfork.S (SYSCALL_ERROR_HANDLER): Redefine if shadow stack is enabled. (SYSCALL_ERROR_LABEL): Likewise. (__vfork): Pop shadow stack and jump back to to caller directly when shadow stack is in use.
* x86: Support IBT and SHSTK in Intel CET [BZ #21598]H.J. Lu2018-07-162-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
* x86_64: Undef SHADOW_STACK_POINTER_OFFSET lastH.J. Lu2018-07-151-3/+2
| | | | | | | | Since SHADOW_STACK_POINTER_OFFSET is defined in jmp_buf-ssp.h, we must undef SHADOW_STACK_POINTER_OFFSET after including <jmp_buf-ssp.h>. * sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Undef SHADOW_STACK_POINTER_OFFSET after including <jmp_buf-ssp.h>.
* x86: Support shadow stack pointer in setjmp/longjmpH.J. Lu2018-07-143-1/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save and restore shadow stack pointer in setjmp and longjmp to support shadow stack in Intel CET. Use feature_1 in tcbhead_t to check if shadow stack is enabled before saving and restoring shadow stack pointer. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>. (_setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>. (setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers): Remove jmp_buf-ssp.sym. * sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/x86/Makefile (gen-as-const-headers): Add jmp_buf-ssp.sym. * sysdeps/x86/jmp_buf-ssp.sym: New dummy file. * sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* Add the statx functionFlorian Weimer2018-07-1031-0/+85
|
* Comment tst-ofdlocks-compat expected failure in some Linux releasesAdhemerval Zanella2018-07-101-0/+8
| | | | | | | | | | | | | As pointed out in a libc-alpha thread [1], the misc/tst-ofdlocks-compat may fail in some specific Linux releases. This patch adds a comment along with a link to discussion in the test source code. No changes are expected. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Add a comment about a kernel issue which lead to test failure in some cases. [1] https://sourceware.org/ml/libc-alpha/2018-07/msg00243.html
* aarch64: add HWCAP_ATOMICS to HWCAP_IMPORTANTSzabolcs Nagy2018-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables searching shared libraries in atomics/ when the hardware supports LSE atomics of armv8.1 so one can provide optimized variants of libraries in a portable way. LSE atomics does not affect library abi, the new instructions can interoperate with old ones. I considered the earlier comments on the patch https://sourceware.org/ml/libc-alpha/2018-04/msg00400.html https://sourceware.org/ml/libc-alpha/2018-04/msg00625.html It turns out that the way glibc dynamic linker decides on the search path is not very flexible: it wants to use hwcap bits and associated strings. So some targets reuse hwcap bits for glibc internal purposes to affect the search logic. But hwcap is an interface with the kernel, glibc should not allocate bits in it for its internal logic as that limits future hwcap extensions and confusing to users who expect to see hwcap bits in ifunc resolvers. Instead of rewriting the dynamic linker path logic (which affects all targets) this patch just uses the existing mechanism, however this means that the path name has to be the hwcap name "atomics" and cannot be changed to something more meaningful to users. It is hard to tell how much performance benefit this can give, in principle armv8.1 atomics can be better optimized in the hardware, so it can make a difference for synchronization heavy code. On some systems such multilib setup may be the only viable way to get optimized libraries used. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h (HWCAP_IMPORTANT): Add HWCAP_ATOMICS.
* aarch64: Remove HWCAP_CPUID from HWCAP_IMPORTANTSzabolcs Nagy2018-07-062-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit f82e9672ad89ea1ef40bbe1af71478e255e87c5e Author: Siddhesh Poyarekar <siddhesh@sourceware.org> aarch64: Allow overriding HWCAP_CPUID feature check using HWCAP_MASK The idea was to make it possible to disable cpuid based ifunc resolution in glibc by changing the hwcap mask which the user could already control. However the hwcap mask has an orthogonal role: it specifies additional library search paths for the dynamic linker. So "cpuid" got added to the search paths when it was set in the default mask (HWCAP_IMPORTANT), which is not useful behaviour, the hwcap masking should not be reused in the cpu features code. Meanwhile there is a tunable to set the cpu explicitly so it is possible to disable the cpuid based dispatch without using a hwcap mask: GLIBC_TUNABLES=glibc.tune.cpu=generic * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Use dl_hwcap without masking. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h (HWCAP_IMPORTANT): Remove HWCAP_CPUID.
* libc-abis: Define ABSOLUTE ABI [BZ #19818][BZ #23307]Maciej W. Rozycki2018-07-051-0/+2
| | | | | | | | | | | | | | | | | | | | Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION where correct absolute (SHN_ABS) symbol run-time load semantics is required. This way it can be ensured at static link time that a program or DSO will not suffer from previous semantics where absolute symbols were relocated by the base address, or symbols whose `st_value' is zero silently ignored leading to a confusing "undefined symbol" error message at load time, and instead "ELF file ABI version invalid" is printed with old dynamic loaders, making it clear that there is an ABI version incompatibility. [BZ #19818] [BZ #23307] * libc-abis (ABSOLUTE): New ABI. * sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI. * NEWS: Mention the new ABI. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Add renameat2 function [BZ #17662]Florian Weimer2018-07-0533-1/+98
| | | | | | | The implementation falls back to renameat if renameat2 is not available in the kernel (or in the kernel headers) and the flags argument is zero. Without kernel support, a non-zero argument returns EINVAL, not ENOSYS. This mirrors what the kernel does for invalid renameat2 flags.
* libc: Extend __libc_freeres framework (Bug 23329).Carlos O'Donell2018-06-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | The __libc_freeres framework does not extend to non-libc.so objects. This causes problems in general for valgrind and mtrace detecting unfreed objects in both libdl.so and libpthread.so. This change is a pre-requisite to properly moving the malloc hooks out of malloc since such a move now requires precise accounting of all allocated data before destructors are run. This commit adds a proper hook in libc.so.6 for both libdl.so and for libpthread.so, this ensures that shm-directory.c which uses freeit () to free memory is called properly. We also remove the nptl_freeres hook and fall back to using weak-ref-and-check idiom for a loaded libpthread.so, thus making this process similar for all DSOs. Lastly we follow best practice and use explicit free calls for both libdl.so and libpthread.so instead of the generic hook process which has undefined order. Tested on x86_64 with no regressions. Signed-off-by: DJ Delorie <dj@redhat.com> Signed-off-by: Carlos O'Donell <carlos@redhat.com>
* getifaddrs: Don't return ifa entries with NULL names [BZ #21812]Daniel Alvarez2018-06-291-0/+8
| | | | | | | | | | | | | | | A lookup operation in map_newlink could turn into an insert because of holes in the interface part of the map. This leads to incorrectly set the name of the interface to NULL when the interface is not present for the address being processed (most likely because the interface was added between the RTM_GETLINK and RTM_GETADDR calls to the kernel). When such changes are detected by the kernel, it'll mark the dump as "inconsistent" by setting NLM_F_DUMP_INTR flag on the next netlink message. This patch checks this condition and retries the whole operation. Hopes are that next time the interface corresponding to the address entry is present in the list and correct name is returned.
* gethostid (Linux variant): Switch to struct scratch_buffer [BZ #18023]Florian Weimer2018-06-271-17/+31
| | | | | Previously, extend_alloca was used without alloca accounting, which could have been problematic with large NSS results.
* Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)Adhemerval Zanella2018-06-2634-19/+353
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the OFD ("file private") locks for architectures that support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and F_{SET,GET}L{W}K64 expects a flock64 argument and when using old F_OFD_* flags with a non LFS flock argument the kernel might interpret the underlying data wrongly. Kernel idea originally was to avoid using such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS semantic as default it is possible to provide the functionality and avoid the bogus struct kernel passing by adjusting the struct manually for the required flags. The idea follows other LFS interfaces that provide two symbols: 1. A new LFS fcntl64 is added on default ABI with the usual macros to select it for FILE_OFFSET_BITS=64. 2. The Linux non-LFS fcntl use a stack allocated struct flock64 for F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided struct. 3. Keep a compat symbol with old broken semantic for architectures that do not define __OFF_T_MATCHES_OFF64_T. So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will aliased to fcntl and no adjustment would be required. So to actually use F_OFD_* with LFS support the source must be built with LFS support (_FILE_OFFSET_BITS=64). Also F_OFD_SETLKW command is handled a cancellation point, as for F_SETLKW{64}. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #20251] * NEWS: Mention fcntl64 addition. * csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel. * login/utmp_file.c: Likewise. * sysdeps/posix/fdopendir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/unix/pt-fcntl.c: Likewise. * include/fcntl.h (__libc_fcntl64, __fcntl64, __fcntl64_nocancel_adjusted): New prototype. (__fcntl_nocancel_adjusted): Remove prototype. * io/Makefile (routines): Add fcntl64. (CFLAGS-fcntl64.c): New rule. * io/Versions [GLIBC_2.28] (fcntl64): New symbol. [GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64. * io/fcntl.h (fcntl64): Add prototype and redirect if __USE_FILE_OFFSET64 is defined. * io/fcntl64.c: New file. * manual/llio.text: Add a note for which commands fcntl acts a cancellation point. * nptl/Makefile (CFLAGS-fcntl64.c): New rule. * sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols. * sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): New symbols. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64, F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for non-LFS case. * sysdeps/unix/sysv/linux/fcntl64.c: New file. * sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename to __fcntl64_nocancel. (__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted. * sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename to __fcntl64_nocancel. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks. (tests-internal): Add tst-ofdlocks-compat. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (fcntl64): New symbol. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* Add SHM_STAT_ANY from Linux 4.17 to bits/shm.h.Joseph Myers2018-06-1812-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a SHM_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/shm.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/arm/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise.
* Add SEM_STAT_ANY from Linux 4.17 to bits/sem.h.Joseph Myers2018-06-1810-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a SEM_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/sem.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise.
* Add MSG_STAT_ANY from Linux 4.17 to bits/msq.h.Joseph Myers2018-06-1810-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a MSG_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/msq.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise.
* Update MAP_TYPE value for hppa from Linux 4.17.Joseph Myers2018-06-181-1/+1
| | | | | | | | | | | | | This patch updates the hppa definition of MAP_TYPE to reflect a corresponding change in the Linux kernel in 4.17 (so the value now has four bits set, as it does on other architectures, although they are different from other architectures because of hppa differences in other MAP_* bits). Tested with build-many-glibcs.py for hppa. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_MISC] (MAP_TYPE): Change value to 0x2b.
* Linux: Create Netlink socket with SOCK_CLOEXEC in __check_pf [BZ #15722]Florian Weimer2018-06-181-1/+1
|
* aarch64: Use an ifunc/VDSO to implement gettimeofday in shared glibc.Steve Ellcey2018-06-141-0/+71
| | | | | | | | | | | | | | | | | | This patch uses an ifunc to implement gettimeofday in the shared libc. This is faster compared to the vsyscall mechanism that has to check a global pointer, demangle it and call it indirectly when the VDSO is present. Resolving the gettimeofday symbol directly to the VDSO code is safe because there are no failures that the libc has to handle by setting errno like in a generic vsyscall (the only failure when the VDSO code falls back to a syscall is EFAULT, but passing an invalid pointer is undefined behaviour so returning -EFAULT is fine). If the kernel supports the VDSO interface we use it for extern calls, otherwise the old vsyscall method is used which falls back to a syscall. The static version of gettimeofday continues to use a syscall, libc.so internal calls use the old vsyscall method. * sysdeps/unix/sysv/linux/aarch64/gettimeofday.c: New file.
* aarch64: add HXT Phecda core memory operation ifuncsHongbo Zhang2018-06-122-0/+4
| | | | | | | | | | | | | | | | | | | | Phecda is HXT semiconductor's CPU core, this patch adds memory operation ifuncs for it: sharing the same optimized implementation with Qualcomm's Falkor core. 2018-06-07 Minfeng Kang <minfeng.kang@hxt-semitech.com> Hongbo Zhang <hongbo.zhang@linaro.org> * sysdeps/aarch64/multiarch/memcpy.c (libc_ifunc): reuse __memcpy_falkor for phecda core. * sysdeps/aarch64/multiarch/memmove.c (libc_ifunc): reuse __memmove_falkor for phecda core. * sysdeps/aarch64/multiarch/memset.c (libc_ifunc): reuse __memset_falkor for phecda core. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c: add MIDR entry for phecda core. * sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_PHECDA): add macro to identify phecda core.
* Avoid cancellable I/O primitives in ld.so.Zack Weinberg2018-06-1232-238/+520
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor initial shared library load-up, are cancellation points, so ld.so should exclusively use I/O primitives that are not cancellable. We currently achieve this by having the cancellation hooks compile as no-ops when IS_IN(rtld); this patch changes to using exclusively _nocancel primitives in the source code instead, which makes the intent clearer and significantly reduces the amount of code compiled under IS_IN(rtld) as well as IS_IN(libc) -- in particular, elf/Makefile no longer thinks we require a copy of unwind.c in rtld-libc.a. (The older mechanism is preserved as a backstop.) The bulk of the change is splitting up the files that define the _nocancel I/O functions, so they don't also define the variants that *are* cancellation points; after which, the existing logic for picking out the bits of libc that need to be recompiled as part of ld.so Just Works. I did this for all of the _nocancel functions, not just the ones used by ld.so, for consistency. fcntl was a little tricky because it's only a cancellation point for certain opcodes (F_SETLKW(64), which can block), and the existing __fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which strikes me as asking for trouble, especially as the only nontrivial definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes. To fix this, fcntl_common moves to fcntl_nocancel.c along with __fcntl_nocancel, and changes its name to the extern (but hidden) symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to .../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro that calls an inline function. The nptl version of libpthread also changes a little, because its "compat-routines" formerly included files that defined all the _nocancel functions it uses; instead of continuing to duplicate them, I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no longer be used from libpthread.so; instead, introduce a custom forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork() in libpthread, and it was handling that by manipulating libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do what other such ports do, and have a pt-vfork.S that defines no symbols. Right now, it appears that Hurd does not implement _nocancel I/O, so sysdeps/generic/not-cancel.h will forward everything back to the regular functions. This changed the names of some of the functions that sysdeps/mach/hurd/dl-sysdep.c needs to interpose. * elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c * sysdeps/unix/sysv/linux/dl-sysdep.c Include not-cancel.h. Use __close_nocancel instead of __close, __open64_nocancel instead of __open, __read_nocancel instead of __libc_read, and __write_nocancel instead of __libc_write. * csu/check_fds.c (check_one_fd) * sysdeps/posix/fdopendir.c (__fdopendir) * sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel instead of __fcntl and/or __libc_fcntl. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np) * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np) * sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system): Use __open64_nocancel instead of __open_nocancel. * sysdeps/unix/sysv/linux/not-cancel.h: Move all of the hidden_proto declarations to the end and issue them if either IS_IN(libc) or IS_IN(rtld). * sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines): Add close_nocancel, fcntl_nocancel, nanosleep_nocancel, open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel, read_nocancel, waitpid_nocancel, write_nocancel. * io/Versions [GLIBC_PRIVATE]: Add __libc_fcntl, __fcntl_nocancel, __open64_nocancel, __write_nocancel. * posix/Versions: Add __nanosleep_nocancel, __pause_nocancel. * nptl/pt-fcntl.c: New file. * nptl/Makefile (pthread-compat-wrappers): Remove fcntl. (libpthread-routines): Add pt-fcntl. * include/fcntl.h (__fcntl_nocancel_adjusted): New function. (__libc_fcntl): Remove attribute_hidden. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Call __fcntl_nocancel_adjusted, not fcntl_common. (__fcntl_nocancel): Move to new file fcntl_nocancel.c. (fcntl_common): Rename to __fcntl_nocancel_adjusted; also move to fcntl_nocancel.c. * sysdeps/unix/sysv/linux/fcntl_nocancel.c: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Remove file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define FCNTL_ADJUST_CMD here, as a self-contained macro. * sysdeps/unix/sysv/linux/close.c: Move __close_nocancel to... * sysdeps/unix/sysv/linux/close_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/nanosleep.c: Move __nanosleep_nocancel to... * sysdeps/unix/sysv/linux/nanosleep_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/open.c: Move __open_nocancel to... * sysdeps/unix/sysv/linux/open_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/open64.c: Move __open64_nocancel to... * sysdeps/unix/sysv/linux/open64_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/openat.c: Move __openat_nocancel to... * sysdeps/unix/sysv/linux/openat_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/openat64.c: Move __openat64_nocancel to... * sysdeps/unix/sysv/linux/openat64_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/pause.c: Move __pause_nocancel to... * sysdeps/unix/sysv/linux/pause_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/read.c: Move __read_nocancel to... * sysdeps/unix/sysv/linux/read_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/waitpid.c: Move __waitpid_nocancel to... * sysdeps/unix/sysv/linux/waitpid_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/write.c: Move __write_nocancel to... * sysdeps/unix/sysv/linux/write_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/nios2/Makefile: Don't override libpthread-routines. * sysdeps/unix/sysv/linux/nios2/pt-vfork.S: New file which defines nothing. * sysdeps/mach/hurd/dl-sysdep.c: Define __read instead of __libc_read, and __write instead of __libc_write. Define __open64 in addition to __open.
* The hppa-linux target still requires an executable stack for kernelJohn David Anglin2018-06-101-0/+7
| | | | | | | | syscall restarts and signal returns. Thus, we need to xfail the check-execstack test. [BZ #23174] * sysdeps/unix/sysv/linux/hppa/Makefile: xfail check-execstack.
* posix: Fix posix_spawnp to not execute invalid binaries in non compat mode ↵Adhemerval Zanella2018-06-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (BZ#23264) Current posix_spawnp implementation wrongly tries to execute invalid binaries (for instance script without shebang) as a shell script in non compat mode. It was a regression introduced by 9ff72da471a509a8c19791efe469f47fa6977410 when __spawni started to use __execvpe instead of __execve (glibc __execvpe try to execute ENOEXEC as shell script regardless). This patch fixes it by using an internal symbol (__execvpex) with the faulty semantic (since compat mode is handled by spawni.c itself). It was reported by Daniel Drake on libc-help [1]. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #23264] * include/unistd.h (__execvpex): New prototype. * posix/Makefile (tests): Add tst-spawn4. (tests-internal): Add tst-spawn4-compat. * posix/execvpe.c (__execvpe_common, __execvpex): New functions. * posix/tst-spawn4-compat.c: New file. * posix/tst-spawn4.c: Likewise. * sysdeps/unix/sysv/linux/spawni.c (__spawni): Do not interpret invalid binaries as shell scripts. * sysdeps/posix/spawni.c (__spawni): Likewise. [1] https://sourceware.org/ml/libc-help/2018-06/msg00012.html
* Add AArch64 hwcap values from Linux 4.17.Joseph Myers2018-06-052-2/+6
| | | | | | | | | | | | | | | | | Linux 4.17 adds four new AArch64 hwcap values. This patch adds them to glibc's AArch64 bits/hwcap.h, with corresponding dl-procinfo.c updates. Tested with build-many-glibcs.py for aarch64. * sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_DIT): New macro. (HWCAP_USCAT): Likewise. (HWCAP_ILRCPC): Likewise. (HWCAP_FLAGM): Likewise. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT): Increase to 28. (_dl_aarch64_cap_flags): Add new flag names.
* Add MAP_FIXED_NOREPLACE from Linux 4.17 to bits/mman.h.Joseph Myers2018-06-0515-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds MAP_FIXED_NOREPLACE (value 0x100000 on most architectures, 0x200000 on alpha). This patch adds that macro to glibc's bits/mman.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/aarch64/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): New macro. * sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/arm/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/mips/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/riscv/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/s390/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/sh/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/x86/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise.
* Update kernel version in syscall-names.list to 4.17.Joseph Myers2018-06-051-2/+2
| | | | | | | | | | | As far as I can tell, Linux 4.17 does not add any new syscalls; this patch updates the version number in syscall-names.list to reflect that it's still current for 4.17. Tested for x86_64-linux-gnu with build-many-glibcs.py. * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 4.17.
* Remove sysdeps/powerpc/soft-fp directory.Joseph Myers2018-05-242-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>, there should not be separate sysdeps/<arch>/soft-fp directories when those are used by all configurations that use sysdeps/<arch>, and, more generally, should not be sysdeps/foo/Implies files pointing to a subdirectory foo/bar. sysdeps/powerpc/soft-fp isn't quite such a case, as the Implies files pointing to it are sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/Implies and sysdeps/unix/sysv/linux/powerpc/powerpc32/e500/nofpu/Implies (and indeed there is a different sfp-machine.h used for powerpc64le). However, the same principle applies: there is no need for this directory because sfp-machine.h, the only file in it, can most naturally go in sysdeps/powerpc/nofpu, which is used by exactly the same configurations (and there is a close dependence between the files there and the sfp-machine.h implementation). This patch eliminates the sysdeps/powerpc/soft-fp directory accordingly. Tested with build-many-glibcs.py that installed stripped shared libraries for powerpc configurations are unchanged by this patch. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/Implies: Remove powerpc/soft-fp. * sysdeps/unix/sysv/linux/powerpc/powerpc32/e500/nofpu/Implies: Likewise. * sysdeps/powerpc/soft-fp/sfp-machine.h: Move to .... * sysdeps/powerpc/nofpu/sfp-machine.h: ... here.
* Switch IDNA implementation to libidn2 [BZ #19728] [BZ #19729] [BZ #22247]Florian Weimer2018-05-233-17/+0
| | | | | This provides an implementation of the IDNA2008 standard and fixes CVE-2016-6261, CVE-2016-6263, CVE-2017-14062.
* Make llseek a compat symbol (bug 18471).Joseph Myers2018-05-224-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The llseek function name is an obsolete, Linux-specific, unprototyped name for lseek64 with a link-time warning. This patch completes the obsoletion of this function name by making it into a compat symbol, not available for newly linked programs and not included in the ABI for new ports. When a compat symbol is defined in syscalls.list, the code for that function is not built at all for static linking unless some non-compat symbol for that function is also defined with an explicit symbol version, so an explicit symbol version for lseek64 is added to the MIPS n32 syscalls.list. The case in make-syscalls.sh that handles such explicit non-compat symbol versions then needs to be changed to use weak_alias instead of strong_alias when the syscall is built outside of libc, to avoid linknamespace failures from a strong lseek64 symbol in static libpthread. The x32 llseek.S was as far as I could tell already unused (nothing builds an llseek.* source file, at least since the lseek / lseek64 / llseek consolidation), so is removed in this patch as well. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #18471] * sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak aliases for non-libc case of versioned symbols. * sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>. (llseek): Define as compat symbol if [SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias with link warning. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later. * sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
* Obsolete nfsservctl.Joseph Myers2018-05-181-1/+1
| | | | | | | | | | | | | | | The Linux nfsservctl syscall was removed in Linux 3.1. Since the minimum kernel version for use with glibc is 3.2, the glibc wrapper for this syscall can no longer usefully be called. This patch makes it into a compat symbol, not provided at all for static linking or new ports. (It was already the case that there was no header declaration of this function.) Tested for x86_64. * sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-05 05:48:47 +0000