about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux
Commit message (Collapse)AuthorAgeFilesLines
* linux: Simplify clock_nanosleepAdhemerval Zanella2020-08-241-22/+11
| | | | | | | | | | | With arch-syscall.h it can now assumes the existance of either __NR_clock_nanosleep or __NR_clock_nanosleep_time64. The 32-bit time_t support is now only build for !__ASSUME_TIME64_SYSCALLS. Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15 kernel). Reviewed-by: Lukasz Majewski <lukma@denx.de>
* linux: Simplify clock_gettimeAdhemerval Zanella2020-08-241-25/+17
| | | | | | | | | | | With arch-syscall.h it can now assumes the existance of either __NR_clock_gettime or __NR_clock_gettime_time64. The 32-bit time_t support is now only build for !__ASSUME_TIME64_SYSCALLS. It also uses the time64-support functions to simplify it further. Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15 kernel).
* linux: Simplify clock_adjtimeAdhemerval Zanella2020-08-241-13/+10
| | | | | | | | | | | | With arch-syscall.h it can now assumes the existance of either __NR_clock_adjtime or __NR_clock_adjtime_time64. The 32-bit time_t support is now only build for !__ASSUME_TIME64_SYSCALLS. Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15 kernel). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* linux: Add helper function to optimize 64-bit time_t fallback supportAdhemerval Zanella2020-08-243-1/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These helper functions are used to optimize the 64-bit time_t support on configurations that requires support for 32-bit time_t fallback (!__ASSUME_TIME64_SYSCALLS). The idea is once the kernel advertises that it does not have 64-bit time_t support, glibc will stop to try issue the 64-bit time_t syscall altogether. For instance: #ifndef __NR_symbol_time64 # define __NR_symbol_time64 __NR_symbol #endif int r; if (supports_time64 ()) { r = INLINE_SYSCALL_CALL (symbol, ...); if (r == 0 || errno != ENOSYS) return r; mark_time64_unsupported (); } #ifndef __ASSUME_TIME64_SYSCALLS <32-bit fallback syscall> #endif return r; On configuration with default 64-bit time_t this optimization should be optimized away by the compiler resulting in no overhead.
* S390: Sync HWCAP names with kernel by adding aliases [BZ #25971]Stefan Liebler2020-08-211-0/+3
| | | | | | | Unfortunately some HWCAP names like HWCAP_S390_VX differs between kernel (see <kernel>/arch/s390/include/asm/elf.h) and glibc. Therefore, those HWCAP names from kernel are now introduced as alias
* Update kernel version to 5.8 in tst-mman-consts.py.Joseph Myers2020-08-131-1/+1
| | | | | | | | This patch updates the kernel version in the test tst-mman-consts.py to 5.8. (There are no new MAP_* constants covered by this test in 5.8 that need any other header changes.) Tested with build-many-glibcs.py.
* Linux: Use faccessat2 to implement faccessat (bug 18683)Florian Weimer2020-08-072-3/+19
| | | | | | | This provides correct AT_EACCESS handling and also takes Linux security modules into account. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update syscall lists for Linux 5.8.Joseph Myers2020-08-0725-2/+27
| | | | | | | | Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* Regenerate configure scripts.Carlos O'Donell2020-08-042-1/+2
|
* Linux: Remove rseq supportFlorian Weimer2020-07-1647-1066/+5
| | | | | | | | | | | | | | | | | | The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* AArch64: Rename IS_ARES to IS_NEOVERSE_N1Wilco Dijkstra2020-07-151-2/+2
| | | | | | Rename IS_ARES to IS_NEOVERSE_N1 since that is a bit clearer. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Remove --enable-obsolete-rpc configure flagPetr Vorel2020-07-131-162/+0
| | | | | | | | | | | | | | | | | | | | | | Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc, and Sun RPC headers. Also test for bug #20790 was removed (test for rpcgen). Backward compatibility for old programs is kept only for architectures and ABIs that have been added in or before version 2.28. libtirpc is mature enough, librpcsvc and rpcgen are provided in rpcsvc-proto project. NOTE: libnsl code depends on Sun RPC (installed libnsl headers use installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency for --enable-obsolete-nsl (removed in a previous commit). The arc ABI list file has to be updated because the port was added with the sunrpc symbols Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* x86: Support usable check for all CPU featuresH.J. Lu2020-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support usable check for all CPU features with the following changes: 1. Change struct cpu_features to struct cpuid_features { struct cpuid_registers cpuid; struct cpuid_registers usable; }; struct cpu_features { struct cpu_features_basic basic; struct cpuid_features features[COMMON_CPUID_INDEX_MAX]; unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX]; ... }; so that there is a usable bit for each cpuid bit. 2. After the cpuid bits have been initialized, copy the known bits to the usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for CPU feature detection. 3. Clear the usable bits which require OS support. 4. If the feature is supported by OS, copy its cpuid bit to its usable bit. 5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE and CPU_FEATURE_USABLE_P to check if a feature is usable. 6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13. 7. Unset MPX feature since it has been deprecated. The results are 1. If the feature is known and doesn't requre OS support, its usable bit is copied from the cpuid bit. 2. Otherwise, its usable bit is copied from the cpuid bit only if the feature is known to supported by OS. 3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the feature can be used. 4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports the feature.
* ARC: Build InfrastructureVineet Gupta2020-07-107-0/+90
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ARC: ABI listsVineet Gupta2020-07-1014-0/+3257
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ARC: Linux Startup and Dynamic LoadingVineet Gupta2020-07-102-0/+116
| | | | | | | | A big shoutout to Cupertino Miranda <cmiranda@synopsys.com> for his valuable contribution in initial bringup and debugging on Linux and later in solving pesky unwinding/cancelation failures in testsuite. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ARC: Linux ABIVineet Gupta2020-07-1012-0/+568
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ARC: Linux Syscall InterfaceVineet Gupta2020-07-1015-0/+941
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* powerpc64: Fix calls when r2 is not used [BZ #26173]Tulio Magno Quites Machado Filho2020-07-101-1/+1
| | | | | | | | | Teach the linker that __mcount_internal, __sigjmp_save_symbol, __syscall_error and __GI_exit do not use r2, so that it does not need to recover r2 after the call. Test at configure time if the assembler supports @notoc and define USE_PPC64_NOTOC.
* linux: Fix syscall list generation instructionsMaciej W. Rozycki2020-07-091-1/+1
| | | | | | | | | | | Make the instructions for syscall list generation match Makefile and refer to `update-syscall-lists'; there has been no `update-arch-syscall' target. Also use single quotes around the command to stick to the ASCII character set. Fixes 4cf0d223052d ("Linux: Add tables with system call numbers"). Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
* sysv: linux: Add 64-bit time_t variant for shmctlAdhemerval Zanella2020-07-0914-49/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __shmctl64 is added and __shmctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_shmid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit shmctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes shmid_ds already contains 64-bit time_t fields and will result in just the __shmctl symbol using the __shmctl64 code. The shmid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using of the 64-bit one. The default 32-bit symbol will allocate and copy the shmid_ds over multiple buffers, but this should be deprecated in favor of the __shmctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysvipc: Remove the linux shm-pad.h fileAdhemerval Zanella2020-07-0912-172/+198
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysvipc: Split out linux struct shmid_dsAdhemerval Zanella2020-07-093-33/+59
| | | | | | | | | | | | This will allow us to have architectures specify their own version. Not semantic changes expected. Checked with a build against the all affected ABIs. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysv: linux: Add 64-bit time_t variant for msgctlAdhemerval Zanella2020-07-0914-52/+349
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __msgctl64 is added and __msgctl is change to call it instead (it adds some extra buffer coping for the 32 bit time_t implementation). Two new structures are added: 1. kernel_msqid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit msgctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes msqid_ds already contains 64-bit time_t fields and will result in just the __msgctl symbol using the __msgctl64 code. The msgid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit time_t. The default 32-bit symbol will allocate and copy the msqid_ds over multiple buffers, but this should be deprecated in favor of the __msgctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysvipc: Remove the linux msq-pad.h fileAdhemerval Zanella2020-07-0911-157/+210
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysvipc: Split out linux struct semid_dsAdhemerval Zanella2020-07-093-33/+58
| | | | | | | | | | | | This will allow us to have architectures specify their own version. Not semantic changes expected. Checked with a build against the all affected ABIs. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* sysv: linux: Add 64-bit time_t variant for semctlAdhemerval Zanella2020-07-0916-64/+372
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different than others 64-bit time_t syscalls, the SysIPC interface does not provide a new set of syscall for y2038 safeness. Instead it uses unused fields in semid_ds structure to return the high bits for the timestamps. To provide a y2038 safe interface a new symbol __semctl64 is added and __semctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_semid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, sparc32) require specific implementations due their kernel ABI. 2. semid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit semctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes semid_ds already contains 64-bit time_t fields and will result in just the __semctl symbol using the __semctl64 code. The semid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low handling. It might be possible to optimize it further to avoid the kernel_semid64_ds to semun transformation if the exported ABI for the architectures matches the expected kernel ABI, but the implementation is already complex enough and don't think this should be a hotspot in any case. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit one. The default 32-bit symbol will allocate and copy the semid_ds over multiple buffers, but this should be deprecated in favor of the __semctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Remove --enable-obsolete-nsl configure flagPetr Vorel2020-07-081-2/+0
| | | | | | | | | | | | | | | | | | | this means that *always* libnsl is only built as shared library for backward compatibility and the NSS modules libnss_nis and libnss_nisplus are not built at all, libnsl's headers aren't installed. This compatibility is kept only for architectures and ABIs that have been added in or before version 2.28. Replacement implementations based on TIRPC, which additionally support IPv6, are available from <https://github.com/thkukuk/>. This change does not affect libnss_compat which does not depended on libnsl since 2.27 and thus can be used without NIS. libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed libnsl headers use installed Sun RPC headers), which will be removed in the following commit.
* aarch64: enable BTI at runtimeSudakshina Das2020-07-084-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Binaries can opt-in to using BTI via an ELF object file marking. The dynamic linker has to then mprotect the executable segments with PROT_BTI. In case of static linked executables or in case of the dynamic linker itself, PROT_BTI protection is done by the operating system. On AArch64 glibc uses PT_GNU_PROPERTY instead of PT_NOTE to check the properties of a binary because PT_NOTE can be unreliable with old linkers (old linkers just append the notes of input objects together and add them to the output without checking them for consistency which means multiple incompatible GNU property notes can be present in PT_NOTE). BTI property is handled in the loader even if glibc is not built with BTI support, so in theory user code can be BTI protected independently of glibc. In practice though user binaries are not marked with the BTI property if glibc has no support because the static linked libc objects (crt files, libc_nonshared.a) are unmarked. This patch relies on Linux userspace API that is not yet in a linux release but in v5.8-rc1 so scheduled to be in Linux 5.8. Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: fix swapcontext for BTISzabolcs Nagy2020-07-081-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | setcontext returns to the specified context via an indirect jump, so there should be a BTI j. In case of getcontext (and all other returns_twice functions) the compiler adds BTI j at the call site, but swapcontext is a normal c call that is currently not handled specially by the compiler. So we change swapcontext such that the saved context returns to a local address that has BTI j and then swapcontext returns to the caller via a normal RET. For this we save the original return address in the slot for x1 of the context because x1 need not be preserved by swapcontext but it is restored when the context saved by swapcontext is resumed. The alternative fix (which is done on x86) would make swapcontext special in the compiler so BTI j is emitted at call sites, on x86 there is an indirect_return attribute for this, on AArch64 we would have to use returns_twice. It was decided against because such fix may need user code updates: the attribute has to be added when swapcontext is called via a function pointer and it breaks always_inline functions with swapcontext. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella2020-07-0730-0/+60
| | | | | | | | | | | | | | | | | The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella2020-07-0730-0/+60
| | | | | | | | | | | | | | | | | | The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Use tls-internal on strerror_lAdhemerval Zanella2020-07-071-0/+1
| | | | | | | | | | The buffer allocation uses the same strategy of strsignal. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Remove old TLS usage on strsignalAdhemerval Zanella2020-07-072-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per-thread state is refactored two use two strategies: 1. The default one uses a TLS structure, which will be placed in the static TLS space (using __thread keyword). 2. Linux allocates via struct pthread and access it through THREAD_* macros. The default strategy has the disadvantage of increasing libc.so static TLS consumption and thus decreasing the possible surplus used in some scenarios (which might be mitigated by BZ#25051 fix). It is used only on Hurd, where accessing the thread storage in the in single thread case is not straightforward (afaiu, Hurd developers could correct me here). The fallback static allocation used for allocation failure is also removed: defining its size is problematic without synchronizing with translated messages (to avoid partial translation) and the resulting usage is not thread-safe. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* linux: Fix __NSIG_WORDS and add __NSIG_BYTESAdhemerval Zanella2020-07-0712-26/+39
| | | | | | | | | | | | | | The __NSIG_WORDS value is based on minimum number of words to hold the maximum number of signals supported by the architecture. This patch also adds __NSIG_BYTES, which is the number of bytes required to represent the supported number of signals. It is used in syscalls which takes a sigset_t. Checked on x86_64-linux-gnu and i686-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Move sys_errlist to a compat symbolAdhemerval Zanella2020-07-0711-62/+215
| | | | | | | | | | | | | | | | | | | | The symbol is deprecated by strerror since its usage imposes some issues such as copy relocations. Its internal name is also changed to _sys_errlist_internal to avoid static linking usage. The compat code is also refactored by removing the over enginered errlist-compat.c generation from manual entried and extra comment token in linker script file. It disantangle the code generation from manual and simplify both Linux and Hurd compat code. The definitions from errlist.c are moved to errlist.h and a new test is added to avoid a new errno entry without an associated one in manual. Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi on all affected platforms. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Move sys_siglist to a compat symbolAdhemerval Zanella2020-07-071-5/+12
| | | | | | | | | | | | | | | | | | | The symbol was deprecated by strsignal and its usage imposes issues such as copy relocations. Its internal name is changed to __sys_siglist and __sys_sigabbrev to avoid static linking usage. The compat code is also refactored, since both Linux and Hurd usage the same strategy: export the same array with different object sizes. The libSegfault change avoids calling strsignal on the SIGFAULT signal handler (the current usage is already sketchy, adding a call that potentially issue locale internal function is even sketchier). Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi on all affected platforms. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Add signum-{generic,arch}.hAdhemerval Zanella2020-07-0711-281/+332
| | | | | | | | | | | | | | | | | | | | It refactor how signals are defined by each architecture. Instead of include a generic header (bits/signum-generic.h) and undef non-default values in an arch specific header (bits/signum.h) the new scheme uses a common definition (bits/signum-generic.h) and each architectures add its specific definitions on a new header (bits/signum-arch.h). For Linux it requires copy some system default definitions to alpha, hppa, and sparc. They are historical values and newer ports uses the generic Linux signum-arch.h. For Hurd the BSD signum is removed and moved to a new header (it is used currently only on Hurd). Checked on a build against all affected ABIs. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Add the __libc_single_threaded variableFlorian Weimer2020-07-0630-0/+30
| | | | | | | | | | | | | | The variable is placed in libc.so, and it can be true only in an outer libc, not libcs loaded via dlmopen or static dlopen. Since thread creation from inner namespaces does not work, pthread_create can update __libc_single_threaded directly. Using __libc_early_init and its initial flag, implementation of this variable is very straightforward. A future version may reset the flag during fork (but not in an inner namespace), or after joining all threads except one. Reviewed-by: DJ Delorie <dj@redhat.com>
* Linux: rseq registration testsMathieu Desnoyers2020-07-064-1/+388
| | | | | | | | | | | | | | | These tests validate that rseq is registered from various execution contexts (main thread, destructor, other threads, other threads created from destructor, forked process (without exec), pthread_atfork handlers, pthread setspecific destructors, signal handlers, atexit handlers). tst-rseq.c only links against libc.so, testing registration of rseq in a non-multithreaded environment. tst-rseq-nptl.c also links against libpthread.so, testing registration of rseq in a multithreaded environment. See the Linux kernel selftests for extensive rseq stress-tests.
* Linux: Use rseq in sched_getcpu if availableMathieu Desnoyers2020-07-061-2/+20
| | | | | | | | | | | | | When available, use the cpu_id field from __rseq_abi on Linux to implement sched_getcpu(). Fall-back on the vgetcpu vDSO if unavailable. Benchmarks: x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading glibc sched_getcpu(): 13.7 ns (baseline) glibc sched_getcpu() using rseq: 2.5 ns (speedup: 5.5x) inline load cpuid from __rseq_abi TLS: 0.8 ns (speedup: 17.1x)
* Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers2020-07-0642-2/+657
| | | | | | | | | | | | | | | | | | | Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
* Linux: Fix UTC offset setting in settimeofday for __TIMESIZE != 64Florian Weimer2020-06-301-3/+8
| | | | | | | | | | The time argument is NULL in this case, and attempt to convert it leads to a null pointer dereference. This fixes commit d2e3b697da2433c08702f95c76458c51545c3df1 ("y2038: linux: Provide __settimeofday64 implementation"). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update kernel version to 5.7 in tst-mman-consts.py.Joseph Myers2020-06-291-1/+1
| | | | | | | | | This patch updates the kernel version in the test tst-mman-consts.py to 5.7. (There are no new constants covered by this test in 5.7 that need any other header changes; there's a new MREMAP_DONTUNMAP, but this test doesn't yet cover MREMAP_*.) Tested with build-many-glibcs.py.
* Add MREMAP_DONTUNMAP from Linux 5.7Joseph Myers2020-06-231-0/+1
| | | | | | | Add the new constant MREMAP_DONTUNMAP from Linux 5.7 to bits/mman-shared.h. Tested with build-many-glibcs.py.
* x86: Update CPU feature detection [BZ #26149]H.J. Lu2020-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Divide architecture features into the usable features and the preferred features. The usable features are for correctness and can be exported in a stable ABI. The preferred features are for performance and only for glibc internal use. 2. Change struct cpu_features to struct cpu_features { struct cpu_features_basic basic; unsigned int *usable_p; struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX]; unsigned int usable[USABLE_FEATURE_INDEX_MAX]; unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX]; ... }; and initialize usable_p to pointer to the usable arary so that struct cpu_features { struct cpu_features_basic basic; unsigned int *usable_p; struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX]; }; can be exported via a stable ABI. The cpuid and usable arrays can be expanded with backward binary compatibility for both .o and .so files. 3. Add COMMON_CPUID_INDEX_7_ECX_1 for AVX512_BF16. 4. Detect ENQCMD, PKS, AVX512_VP2INTERSECT, MD_CLEAR, SERIALIZE, HYBRID, TSXLDTRK, L1D_FLUSH, CORE_CAPABILITIES and AVX512_BF16. 5. Rename CAPABILITIES to ARCH_CAPABILITIES. 6. Check if AVX512_VP2INTERSECT, AVX512_BF16 and PKU are usable. 7. Update CPU feature detection test.
* New exp10f version without SVID compat wrapperAdhemerval Zanella2020-06-1926-0/+26
| | | | | | | | | | | | | | | | | | | | | | | This patch changes the exp10f error handling semantics to only set errno according to POSIX rules. New symbol version is introduced at GLIBC_2.32. The old wrappers are kept for compat symbols. There are some outliers that need special handling: - ia64 provides an optimized implementation of exp10f that uses ia64 specific routines to set SVID compatibility. The new symbol version is aliased to the exp10f one. - m68k also provides an optimized implementation, and the new version uses it instead of the sysdeps/ieee754/flt32 one. - riscv and csky uses the generic template implementation that does not provide SVID support. For both cases a new exp10f version is not added, but rather the symbols version of the generic sysdeps/ieee754/flt32 is adjusted instead. Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu.
* Update syscall-names.list for Linux 5.7.Joseph Myers2020-06-151-2/+2
| | | | | | | Linux 5.7 has no new syscalls. Update the version number in syscall-names.list to reflect that it is still current for 5.7. Tested with build-many-glibcs.py.
* Linux: Use __pthread_attr_setsigmask_internal for timer helper threadFlorian Weimer2020-06-021-9/+10
| | | | | | | | | | timer_create needs to create threads with all signals blocked, including SIGTIMER (which happens to equal SIGCANCEL). Fixes commit b3cae39dcbfa2432b3f3aa28854d8ac57f0de1b8 ("nptl: Start new threads with all signals blocked [BZ #25098]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Add pthread_attr_setsigmask_np, pthread_attr_getsigmask_npFlorian Weimer2020-06-0230-0/+60
| | | | | Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-08 07:57:22 +0000