about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux/x86
Commit message (Collapse)AuthorAgeFilesLines
* Use single bits/msq.h for all architectures.Joseph Myers2018-10-112-83/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
* x86: Use RTM intrinsics in pthread mutex lock elisionH.J. Lu2018-10-022-67/+7
| | | | | | | | | | | | Since RTM intrinsics are supported in GCC 4.9, we can use them in pthread mutex lock elision. * sysdeps/unix/sysv/linux/x86/Makefile (CFLAGS-elision-lock.c): Add -mrtm. (CFLAGS-elision-unlock.c): Likewise. (CFLAGS-elision-timed.c): Likewise. (CFLAGS-elision-trylock.c): Likewise. * sysdeps/unix/sysv/linux/x86/hle.h: Rewritten.
* Share MAP_* flags between more architectures.Joseph Myers2018-09-261-16/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing bits/mman.h unification between architectures using the Linux kernel, this patch arranges for the common set of MAP_* flags to be used by two more architectures. That common set is moved to bits/mman-map-flags-generic.h, which is included by bits/mman.h, to allow architectures to use that common set even if they also have architecture-specific additions to it. As well as the generic bits/mman.h, the versions for x86 and ia64 are also then made to include bits/mman-map-flags-generic.h, so while they still need architecture-specific bits/mman.h (for MAP_32BIT and MAP_GROWSUP respectively), they do not need to duplicate the generic flag definitions in there. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-map-flags-generic.h: New file. Most contents moved from .... * sysdeps/unix/sysv/linux/bits/mman.h: ... here. Move contents to and include <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/mman-map-flags-generic.h. * sysdeps/unix/sysv/linux/ia64/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_GROWSUP): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/x86/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_32BIT): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>.
* Unify more sys/procfs.h headers.Joseph Myers2018-09-253-145/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the process of unifying sys/procfs.h headers for architectures using the Linux kernel. A bits/procfs-id.h header is added to define __pr_uid_t and __pr_gid_t for the types of pr_uid and pr_gid; the default version of this header uses unsigned int. On some architectures, sys/procfs.h has copies of 32-bit structures for 64-bit builds; those move into a bits/procfs-extra.h header (they can't go in bits/procfs.h because they have to come *after* other declarations from sys/procfs.h). Given appropriate versions of these headers, six more architectures can then move to providing only bits/procfs*.h without duplicating the rest of the contents of sys/procfs.h. Only alpha needs a further bits/ header to be added before it can stop having its own sys/procfs.h. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/procfs.h: Include <bits/procfs-id.h> and <bits/procfs-extra.h>. (struct elf_prpsinfo): Use __pr_uid_t and __pr_gid_t as types of pr_uid and pr_gid. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs-id.h and bits/procfs-extra.h. * sysdeps/unix/sysv/linux/bits/procfs-extra.h: New file. * sysdeps/unix/sysv/linux/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/m68k/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/procfs.h: Likewise.
* x86/CET: Fix property note parser [BZ #23467]H.J. Lu2018-07-304-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | GNU_PROPERTY_X86_FEATURE_1_AND may not be the first property item. We need to check each property item until we reach the end of the property or find GNU_PROPERTY_X86_FEATURE_1_AND. This patch adds 2 tests. The first test checks if IBT is enabled and the second test reads the output from the first test to check if IBT is is enabled. The second second test fails if IBT isn't enabled properly. Reviewed-by: Carlos O'Donell <carlos@redhat.com> [BZ #23467] * sysdeps/unix/sysv/linux/x86/Makefile (tests): Add tst-cet-property-1 and tst-cet-property-2 if CET is enabled. (CFLAGS-tst-cet-property-1.o): New. (ASFLAGS-tst-cet-property-dep-2.o): Likewise. ($(objpfx)tst-cet-property-2): Likewise. ($(objpfx)tst-cet-property-2.out): Likewise. * sysdeps/unix/sysv/linux/x86/tst-cet-property-1.c: New file. * sysdeps/unix/sysv/linux/x86/tst-cet-property-2.c: Likewise. * sysdeps/unix/sysv/linux/x86/tst-cet-property-dep-2.S: Likewise. * sysdeps/x86/dl-prop.h (_dl_process_cet_property_note): Parse each property item until GNU_PROPERTY_X86_FEATURE_1_AND is found.
* x86/CET: Add a setcontext test for CETH.J. Lu2018-07-252-0/+134
| | | | | | | | | | Verify that setcontext works with gaps above and below the newly allocated shadow stack. * sysdeps/unix/sysv/linux/x86/Makefile (tests): Add tst-cet-setcontext-1 if CET is enabled. (CFLAGS-tst-cet-setcontext-1.c): Add -mshstk. * sysdeps/unix/sysv/linux/x86/tst-cet-setcontext-1.c: New file.
* x86-64/CET: Extend ucontext_t to save shadow stackH.J. Lu2018-07-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a field to ucontext_t to save shadow stack: 1. getcontext and swapcontext are updated to save the caller's shadow stack pointer and return addresses. 2. setcontext and swapcontext are updated to restore shadow stack and jump to new context directly. 3. makecontext is updated to allocate a new shadow stack and set the caller's return address to __start_context. Since makecontext allocates a new shadow stack when making a new context and kernel allocates a new shadow stack for clone/fork/vfork syscalls, we track the current shadow stack base. In setcontext and swapcontext, if the target shadow stack base is the same as the current shadow stack base, we unwind the shadow stack. Otherwise it is a stack switch and we look for a restore token. We enable shadow stack at run-time only if program and all used shared objects, including dlopened ones, are shadow stack enabled, which means that they must be compiled with GCC 8 or above and glibc 2.28 or above. We need to save and restore shadow stack only if shadow stack is enabled. When caller of getcontext, setcontext, swapcontext and makecontext is compiled with smaller ucontext_t, shadow stack won't be enabled at run-time. We check if shadow stack is enabled before accessing the extended field in ucontext_t. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Add __ssp. * sysdeps/unix/sysv/linux/x86_64/__start_context.S: Include <asm/prctl.h> and "ucontext_i.h" when shadow stack is enabled. (__push___start_context): New. * sysdeps/unix/sysv/linux/x86_64/getcontext.S: Include <asm/prctl.h>. (__getcontext): Record the current shadow stack base. Save the caller's shadow stack pointer and base. * sysdeps/unix/sysv/linux/x86_64/makecontext.c: Include <pthread.h>, <libc-pointer-arith.h> and <sys/prctl.h>. (__push___start_context): New prototype. (__makecontext): Call __push___start_context to allocate a new shadow stack, push __start_context onto the new stack as well as the new shadow stack. * sysdeps/unix/sysv/linux/x86_64/setcontext.S: Include <asm/prctl.h>. (__setcontext): Restore the target shadow stack. * sysdeps/unix/sysv/linux/x86_64/swapcontext.S: Include <asm/prctl.h>. (__swapcontext): Record the current shadow stack base. Save the caller's shadow stack pointer and base. Restore the target shadow stack. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (STACK_SIZE_TO_SHADOW_STACK_SIZE_SHIFT): New. * sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym (oSSP): New.
* x86/CET: Extend arch_prctl syscall for CET controlH.J. Lu2018-07-243-6/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CET arch_prctl bits should be defined in <asm/prctl.h> from Linux kernel header files. Add x86 <include/asm/prctl.h> for pre-CET kernel header files. Note: sysdeps/unix/sysv/linux/x86/include/asm/prctl.h should be removed if <asm/prctl.h> from the required kernel header files contains CET arch_prctl bits. /* CET features: IBT: GNU_PROPERTY_X86_FEATURE_1_IBT SHSTK: GNU_PROPERTY_X86_FEATURE_1_SHSTK */ /* Return CET features in unsigned long long *addr: features: addr[0]. shadow stack base address: addr[1]. shadow stack size: addr[2]. */ # define ARCH_CET_STATUS 0x3001 /* Disable CET features in unsigned int features. */ # define ARCH_CET_DISABLE 0x3002 /* Lock all CET features. */ # define ARCH_CET_LOCK 0x3003 /* Allocate a new shadow stack with unsigned long long *addr: IN: requested shadow stack size: *addr. OUT: allocated shadow stack address: *addr. */ # define ARCH_CET_ALLOC_SHSTK 0x3004 /* Return legacy region bitmap info in unsigned long long *addr: address: addr[0]. size: addr[1]. */ # define ARCH_CET_LEGACY_BITMAP 0x3005 Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/unix/sysv/linux/x86/include/asm/prctl.h: New file. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Include <sys/prctl.h> and <asm/prctl.h>. (get_cet_status): Call arch_prctl with ARCH_CET_STATUS. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Include <sys/prctl.h> and <asm/prctl.h>. (dl_cet_allocate_legacy_bitmap): Call arch_prctl with ARCH_CET_LEGACY_BITMAP. (dl_cet_disable_cet): Call arch_prctl with ARCH_CET_DISABLE. (dl_cet_lock_cet): Call arch_prctl with ARCH_CET_LOCK. * sysdeps/x86/libc-start.c: Include <startup.h>.
* x86: Support IBT and SHSTK in Intel CET [BZ #21598]H.J. Lu2018-07-162-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
* x86: Support shadow stack pointer in setjmp/longjmpH.J. Lu2018-07-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save and restore shadow stack pointer in setjmp and longjmp to support shadow stack in Intel CET. Use feature_1 in tcbhead_t to check if shadow stack is enabled before saving and restoring shadow stack pointer. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>. (_setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>. (setjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers): Remove jmp_buf-ssp.sym. * sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include <jmp_buf-ssp.h>. (____longjmp_chk): Restore shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined. * sysdeps/x86/Makefile (gen-as-const-headers): Add jmp_buf-ssp.sym. * sysdeps/x86/jmp_buf-ssp.sym: New dummy file. * sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>. (__longjmp): Restore shadow stack pointer if shadow stack is enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp isn't defined for __longjmp_cancel. * sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>. (__sigsetjmp): Save shadow stack pointer if shadow stack is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* Add SHM_STAT_ANY from Linux 4.17 to bits/shm.h.Joseph Myers2018-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a SHM_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/shm.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/arm/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm.h [__USE_MISC] (SHM_STAT_ANY): Likewise.
* Add SEM_STAT_ANY from Linux 4.17 to bits/sem.h.Joseph Myers2018-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a SEM_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/sem.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h [__USE_MISC] (SEM_STAT_ANY): Likewise.
* Add MSG_STAT_ANY from Linux 4.17 to bits/msq.h.Joseph Myers2018-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds a MSG_STAT_ANY constant (ipcs command). This patch adds it to the relevant bits/msq.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/alpha/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): New macro. * sysdeps/unix/sysv/linux/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/generic/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h [__USE_MISC] (MSG_STAT_ANY): Likewise.
* Add MAP_FIXED_NOREPLACE from Linux 4.17 to bits/mman.h.Joseph Myers2018-06-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.17 adds MAP_FIXED_NOREPLACE (value 0x100000 on most architectures, 0x200000 on alpha). This patch adds that macro to glibc's bits/mman.h headers. Tested for x86_64. * sysdeps/unix/sysv/linux/aarch64/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): New macro. * sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/arm/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/mips/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/riscv/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/s390/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/sh/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise. * sysdeps/unix/sysv/linux/x86/bits/mman.h [__USE_MISC] (MAP_FIXED_NOREPLACE): Likewise.
* x86: Use pad in pthread_unwind_buf to preserve shadow stack registerH.J. Lu2018-05-021-5/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pad array in struct pthread_unwind_buf is used by setjmp to save shadow stack register. We assert that size of struct pthread_unwind_buf is no less than offset of shadow stack pointer + shadow stack pointer size. Since functions, like LIBC_START_MAIN, START_THREAD_DEFN as well as these with thread cancellation, call setjmp, but never return after __libc_unwind_longjmp, __libc_unwind_longjmp, which is defined as __libc_longjmp on x86, doesn't need to restore shadow stack register. __libc_longjmp, which is a private interface for thread cancellation implementation in libpthread, is changed to call __longjmp_cancel, instead of __longjmp. __longjmp_cancel is a new internal function in libc, which is similar to __longjmp, but doesn't restore shadow stack register. The compatibility longjmp and siglongjmp in libpthread.so are changed to call __libc_siglongjmp, instead of __libc_longjmp, so that they will restore shadow stack register. Tested with build-many-glibcs.py. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> * nptl/pthread_create.c (START_THREAD_DEFN): Clear previous handlers after setjmp. * setjmp/longjmp.c (__libc_longjmp): Don't define alias if defined. * sysdeps/unix/sysv/linux/x86/setjmpP.h: Include <libc-pointer-arith.h>. (_JUMP_BUF_SIGSET_BITS_PER_WORD): New. (_JUMP_BUF_SIGSET_NSIG): Changed to 96. (_JUMP_BUF_SIGSET_NWORDS): Changed to use ALIGN_UP and _JUMP_BUF_SIGSET_BITS_PER_WORD. * sysdeps/x86/Makefile (sysdep_routines): Add __longjmp_cancel. * sysdeps/x86/__longjmp_cancel.S: New file. * sysdeps/x86/longjmp.c: Likewise. * sysdeps/x86/nptl/pt-longjmp.c: Likewise.
* Add PTRACE_SECCOMP_GET_METADATA from Linux 4.16 to sys/ptrace.h.Joseph Myers2018-04-241-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the PTRACE_SECCOMP_GET_METADATA constant from Linux 4.16 to all relevant sys/ptrace.h files. A type struct __ptrace_seccomp_metadata, analogous to other such types, is also added. Tested for x86_64, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): New enum value and macro. * sysdeps/unix/sysv/linux/bits/ptrace-shared.h (struct __ptrace_seccomp_metadata): New type. * sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ptrace.h (PTRACE_SECCOMP_GET_METADATA): Likewise.
* Add MAP_SYNC from Linux 4.15.Joseph Myers2018-02-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the MAP_SYNC macro from Linux 4.15 to various bits/mman.h headers. Note that this is *not* added to all architectures: in Linux 4.15, this macro is only in asm-generic/mman.h, and only some architectures' asm/mman.h include the asm-generic file - the architectures not using the asm-generic file will need their own values of MAP_SYNC allocated to support this functionality (some of them also already have conflicting mmap flags so the value there will have to be different from the generic 0x80000). Specifically, for glibc architectures, alpha hppa mips powerpc sparc tile lack allocations of values for MAP_SYNC. Tested for x86_64. * sysdeps/unix/sysv/linux/aarch64/bits/mman.h [__USE_MISC] (MAP_SYNC): New macro. * sysdeps/unix/sysv/linux/arm/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/riscv/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/s390/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/sh/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/x86/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise.
* Revert Intel CET changes to __jmp_buf_tag (Bug 22743)Carlos O'Donell2018-01-253-89/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit cba595c350e52194e10c0006732e1991e3d0803b and commit f81ddabffd76ac9dd600b02adbf3e1dac4bb10ec, ABI compatibility with applications was broken by increasing the size of the on-stack allocated __pthread_unwind_buf_t beyond the oringal size. Applications only have the origianl space available for __pthread_unwind_register, and __pthread_unwind_next to use, any increase in the size of __pthread_unwind_buf_t causes these functions to write beyond the original structure into other on-stack variables leading to segmentation faults in common applications like vlc. The only workaround is to version those functions which operate on the old sized objects, but this must happen in glibc 2.28. Thank you to Andrew Senkevich, H.J. Lu, and Aurelien Jarno, for submitting reports and tracking the issue down. The commit reverts the above mentioned commits and testing on x86_64 shows that the ABI compatibility is restored. A tst-cleanup1 regression test linked with an older glibc now passes when run with the newly built glibc. Previously a tst-cleanup1 linked with an older glibc would segfault when run with an affected glibc build. Tested on x86_64 with no regressions. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-0146-46/+46
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* linux/x86: sync sys/ptrace.h with Linux 4.14 [BZ #22433]Dmitry V. Levin2017-12-291-0/+194
| | | | | | | | | | Clone generic linux/sys/ptrace.h, add the following x86-specific __ptrace_request constants: PTRACE_GET_THREAD_AREA, PTRACE_SET_THREAD_AREA, PTRACE_ARCH_PRCTL, PTRACE_SYSEMU, PTRACE_SYSEMU_SINGLESTEP, and PTRACE_SINGLEBLOCK. [BZ #22433] * sysdeps/unix/sysv/linux/x86/sys/ptrace.h: New file.
* Linux/x86: Update cancel_jmp_buf to match __jmp_buf_tag [BZ #22563]H.J. Lu2017-12-193-0/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer to support shadow stack in Intel Control-flow Enforcemen Technology. Since the cancel_jmp_buf array is passed to setjmp and longjmp by casting it to pointer to struct __jmp_buf_tag, it should be as large as struct __jmp_buf_tag. Otherwise when shadow stack is enabled, setjmp and longjmp will write and read beyond cancel_jmp_buf when saving and restoring shadow stack pointer. This patch adds bits/types/__cancel_jmp_buf_tag.h to define struct __cancel_jmp_buf_tag so that Linux/x86 can add saved_mask to cancel_jmp_buf. Tested natively on i386, x86_64 and x32. Tested hppa-linux-gnu with build-many-glibcs.py. [BZ #22563] * bits/types/__cancel_jmp_buf_tag.h: New file. * sysdeps/unix/sysv/linux/x86/bits/types/__cancel_jmp_buf_tag.h * sysdeps/unix/sysv/linux/x86/pthreaddef.h: Likewise. * sysdeps/unix/sysv/linux/x86/nptl/pthreadP.h: Likewise. * nptl/Makefile (headers): Add bits/types/__cancel_jmp_buf_tag.h. * nptl/descr.h [NEED_SAVED_MASK_IN_CANCEL_JMP_BUF] (pthread_unwind_buf): Add saved_mask to cancel_jmp_buf. * sysdeps/nptl/pthread.h: Include <bits/types/__cancel_jmp_buf_tag.h>. (__pthread_unwind_buf_t): Use struct __cancel_jmp_buf_tag with __cancel_jmp_buf. * sysdeps/unix/sysv/linux/hppa/pthread.h: Likewise.
* Add elision tunablesRogerio Alves2017-12-051-7/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds several new tunables to control the behavior of elision on supported platforms[1]. Since elision now depends on tunables, we should always *compile* with elision enabled, and leave the code disabled, but available for runtime selection. This gives us *much* better compile-time testing of the existing code to avoid bit-rot[2]. Tested on ppc, ppc64, ppc64le, s390x and x86_64. [1] This part of the patch was initially proposed by Paul Murphy but was "staled" because the framework have changed since the patch was originally proposed: https://patchwork.sourceware.org/patch/10342/ [2] This part of the patch was inititally proposed as a RFC by Carlos O'Donnell. Make sense to me integrate this on the patch: https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html * elf/dl-tunables.list: Add elision parameters. * manual/tunables.texi: Add entries about elision tunable. * sysdeps/unix/sysv/linux/powerpc/elision-conf.c: Add callback functions to dynamically enable/disable elision. Add multiple callbacks functions to set elision parameters. Deleted __libc_enable_secure check. * sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise. * sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise. * configure: Regenerated. * configure.ac: Option enable_lock_elision was deleted. * config.h.in: ENABLE_LOCK_ELISION flag was deleted. * config.make.in: Remove references to enable_lock_elision. * manual/install.texi: Elision configure option was removed. * INSTALL: Regenerated to remove enable_lock_elision. * nptl/Makefile: Disable elision so it can verify error case for destroying a mutex. * sysdeps/powerpc/nptl/elide.h: Cleanup ENABLE_LOCK_ELISION check. Deleted macros for the case when ENABLE_LOCK_ELISION was not defined. * sysdeps/s390/configure: Regenerated. * sysdeps/s390/configure.ac: Remove references to enable_lock_elision.. * nptl/tst-mutex8.c: Deleted all #ifndef ENABLE_LOCK_ELISION from the test. * sysdeps/powerpc/powerpc32/sysdep.h: Deleted all ENABLE_LOCK_ELISION checks. * sysdeps/powerpc/powerpc64/sysdep.h: Likewise. * sysdeps/powerpc/sysdep.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise. * sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/Makefile: Remove references to enable-lock-elision. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
* Linux: Implement interfaces for memory protection keysFlorian Weimer2017-12-053-0/+108
| | | | | | | | | | | | | | | | This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect, and x86-64 implementations of pkey_get and pkey_set, which abstract over the PKRU CPU register and hide the actual number of memory protection keys supported by the CPU. pkey_mprotect with a -1 key is implemented using mprotect, so it will work even if the kernel does not support the pkey_mprotect system call. The system call wrapers use unsigned int instead of unsigned long for parameters, so that no special treatment for x32 is needed. The flags argument is currently unused, and the access rights bit mask is limited to two bits by the current PKRU register layout anyway. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86: Make a space in jmpbuf for shadow stack pointerH.J. Lu2017-11-304-0/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support Shadow Stack (SHSTK) in Intel Control-flow Enforcement Technology (CET) in setjmp/longjmp, we need to save shadow stack pointer in jmp_buf. The __saved_mask field in jmp_buf has type of __sigset_t. On Linux, __sigset_t is defined as #define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int))) typedef struct { unsigned long int __val[_SIGSET_NWORDS]; } __sigset_t; which is much bigger than expected by the __sigprocmask system call, which has typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; For Linux/x86, we can shrink __sigset_t used by __saved_mask in jmp_buf to add paddings for shadow stack pointer. As long as the new __sigset_t is not smaller than sigset_t expected by the __sigprocmask system call, it should work correctly. This patch adds an internal header file, <setjmpP.h>, to define __jmp_buf_sigset_t for __saved_mask in jmp_buf for Linux/x86 with a space to store shadow stack pointer. It verifies __jmp_buf_sigset_t has the suitable size for the __sigprocmask system call. A run-time test, tst-saved_mask-1.c, is added to verify that size of __jmp_buf_sigset_t is sufficient. If its size is too small, the test fails with rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc 0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address) rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc 0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address) rt_sigprocmask(SIG_SETMASK, NULL, 0x7fa8aa28effc, 8) = -1 EFAULT (Bad address) exit_group(1) = ? Tested with build-many-glibcs.py. * debug/longjmp_chk.c: Include <setjmpP.h> instead of <setjmp.h>. * setjmp/longjmp.c: Include <setjmpP.h> instead of <setjmp.h>. (__libc_siglongjmp): Cast &env[0].__saved_mask to "sigset_t *". * setjmp/sigjmp.c: Include <setjmpP.h> instead of <setjmp.h>. (__sigjmp_save): Cast &env[0].__saved_mask to "sigset_t *". * sysdeps/generic/setjmpP.h: New file. * sysdeps/unix/sysv/linux/x86/jmp_buf-ssp.sym: Likewise. * sysdeps/unix/sysv/linux/x86/setjmpP.h: Likewise. * sysdeps/unix/sysv/linux/x86/tst-saved_mask-1.c: Likewise. * sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers): Add jmp_buf-ssp.sym. (tests): Add tst-saved_mask-1.
* Fix mcontext_t sigcontext namespace (bug 21457).Joseph Myers2017-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
* Remove abi-*-options compiler flagsFlorian Weimer2017-08-281-3/+0
| | | | | | These options are no longer needed since commit 2dba5ce7b8115d6a2789bf279892263621088e74 (<bits/syscall.h>: Use an arch-independent system call list on Linux).
* x86: Mark VDSO_SYMBOL(getcpu) with attribute_hidden [BZ #18822]H.J. Lu2017-08-211-1/+2
| | | | | | | | | VDSO_SYMBOL(getcpu) is defined as hidden in Linux/x86_64 init-first.c and unused for Linux/i386. [BZ #18822] * sysdeps/unix/sysv/linux/x86/libc-vdso.h (VDSO_SYMBOL(getcpu)): Add attribute_hidden.
* Fix uc_* namespace (bug 21457).Joseph Myers2017-08-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard members of ucontext_t, in all standard versions with that type, are uc_link, uc_sigmask, uc_stack and uc_mcontext. The uc_* namespace is mostly reserved for additions to the structure. However, in XPG4.2, it's only reserved when <ucontext.h> is included, not when <signal.h> is included, while <signal.h> is required to define ucontext_t (but not allowed to make visible other symbols from <ucontext.h>). Thus, nonstandard members should avoid uc_* names. Some already do use __uc_*, but others don't; most architectures (all except ia64, I think) have a member uc_flags and some have additional members beyond that. This patch makes nonstandard members have an __ prefix unless __USE_MISC is defined. Members whose names indicate they are solely padding / reserved for future use are renamed unconditionally to use the __glibc_reserved1 naming convention. This is part of the preparation for a revised version of the mcontext_t / sigcontext patch to be able to eliminate all 13 of the miscellaneous XFAILs in conform/Makefile, rather than only 11 of them as at present (at least one further fix on top of this one will be needed for that as well). Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/generic/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/i386/sys/ucontext.h (__ctx): Move undefine further down. (__ctxt): Likewise. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags and uc_regspace. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags, uc_regs_ptr, uc_regs and uc_reg_space. Rename uc_pad to __glibc_reserved1. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags.
* Rename struct ucontext tag (bug 21457).Joseph Myers2017-06-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ucontext_t type has a tag struct ucontext. As with previous such issues for siginfo_t and stack_t, this tag is not permitted by POSIX (is not in a reserved namespace), and so namespace conformance means breaking C++ name mangling for this type. In this case, the type does need to have some tag rather than just a typedef name, because it includes a pointer to itself. This patch uses struct ucontext_t as the new tag, so the type is mangled as ucontext_t (the POSIX *_t reservation applies in all namespaces, not just the namespace of ordinary identifiers). Another reserved name such as struct __ucontext could of course be used. Because of other namespace issues, this patch does not by itself fix bug 21457 or allow any XFAILs to be removed. Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct ucontext_t. * sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/powerpc/powerpc32/backtrace.c (struct rt_signal_frame_32): Likewise. * sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64): Likewise. * sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h (__profil_counter): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c (__start_context): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT): Likewise.
* tunables: Add IFUNC selection and cache sizesH.J. Lu2017-06-201-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current IFUNC selection is based on microbenchmarks in glibc. It should give the best performance for most workloads. But other choices may have better performance for a particular workload or on the hardware which wasn't available at the selection was made. The environment variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz, where the feature name is case-sensitive and has to match the ones in cpu-features.h. It can be used by glibc developers to override the IFUNC selection to tune for a new processor or improve performance for a particular workload. It isn't intended for normal end users. NOTE: the IFUNC selection may change over time. Please check all multiarch implementations when experimenting. Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is provided to set threshold to use non temporal store to NUMBER, GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set shared cache size. * elf/dl-tunables.list (tune): Add ifunc, x86_non_temporal_threshold, x86_data_cache_size and x86_shared_cache_size. * manual/tunables.texi: Document glibc.tune.ifunc, glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size and glibc.tune.x86_non_temporal_threshold. * sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86/cacheinfo.c (init_cacheinfo): Check and get data cache size, shared cache size and non temporal threshold from cpu_features. * sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE): New. [HAVE_TUNABLES] Include <unistd.h>. [HAVE_TUNABLES] Include <elf/dl-tunables.h>. [HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise. [HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set IFUNC selection, data cache size, shared cache size and non temporal threshold. * sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size, shared_cache_size and non_temporal_threshold.
* Fix another x86 sys/ucontext.h namespace issue (bug 21457).Joseph Myers2017-06-191-1/+1
| | | | | | | | | | | This patch fixes a namespace issue for one more field in the x86 sys/ucontext.h that I missed in my previous changes. Tested for x86_64. [BZ #21457] * sysdeps/unix/sysv/linux/x86/sys/ucontext.h [__x86_64__] (struct _libc_xmmreg): Use __ctx in defining field.
* Fix more namespace issues in sys/ucontext.h (bug 21457).Joseph Myers2017-06-011-30/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the fixes for namespace issues in sys/ucontext.h, this patch moves various symbols into the implementation namespace in the absence of __USE_MISC. As with previous changes, it is nonexhaustive, just covering more straightforward cases. Structure fields are generally changed to have a prefix __ in the absence of __USE_MISC, via a macro __ctx (used without a space before the open parenthesis, since the result is a single identifier). Various macros such as NGREG also have leading __ added. No changes are made to structure tags (and thus to C++ name mangling), except that in the (unused) file sysdeps/i386/sys/ucontext.h, structures defined inside other structures as the type for a field have their tags removed in the non-__USE_MISC case (those structure tags would not in any case have been visible in C++, because in C++ the scope of such a tag is limited to the containing structure). No changes are made to the contents of bits/sigcontext.h, or to whether it is included. Because of remaining namespace issues, this patch does not yet fix the bug or allow any XFAILs to be removed. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/i386/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (__ctxt): Likewise. (fpregset_t): Use __ctx and __ctxt in defining fields. (mcontext_t): Likewise. * sysdeps/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (__ctx): New macro. [__WORDSIZE == 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE == 32] (gregset_t): Define using __NGREG. [__WORDSIZE == 32] (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. [__WORDSIZE != 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE != 32] (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. [__WORDSIZE != 32] (NVRREG): Rename to __NVRREG and define NVRREG to __NVRREG if [__USE_MISC]. [__WORDSIZE != 32] (gregset_t): Define using __NGREG. [__WORDSIZE != 32] (fpregset_t): Define using __NFPREG. [__WORDSIZE != 32] (vscr_t): Use __ctx in defining fields. [__WORDSIZE != 32] (vrregset_t): Likewise. [__WORDSIZE != 32] (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): New macro. (__psw_t): Use __ctx in defining fields. (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (fpreg_t): Use __ctx in defining fields. (fpregset_t): Likewise. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (__ctx): New macro. [__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__x86_64__] (gregset_t): Define using __NGREG. [__x86_64__] (struct _libc_fpxreg): Use __ctx in defining fields. [__x86_64__] (struct _libc_fpstate): Likewise. [__x86_64__] (mcontext_t): Likewise. [!__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [!__x86_64__] (gregset_t): Define using __NGREG. [!__x86_64__] (struct _libc_fpreg): Use __ctx in defining fields. [!__x86_64__] (struct _libc_fpstate): Likewise. [!__x86_64__] (mcontext_t): Likewise.
* Fix sys/ucontext.h namespace from signal.h etc. inclusion (bug 21457).Joseph Myers2017-05-232-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The various sys/ucontext.h headers include <signal.h> and all the headers split out of <bits/sigstack.h>. (Except that the powerpc version does not include <signal.h>.) None of the standard versions defining ucontext.h require or permit such inclusions; rather, they all say that the stack_t and sigset_t types from signal.h are defined. This patch fixes the headers to include just the bits/ headers for those types (and the existing includes of bits/sigcontext.h). Since bits/types/sigset_t.h is now being included instead of bits/types/__sigset_t.h, __sigset_t uses in the headers are replaced by direct use of the public sigset_t type. sysdeps/unix/sysv/linux/x86/bits/sigcontext.h was relying on the prior inclusion of <signal.h> to define types such as __uint32_t, so gets a bits/types.h include added to provide those types. Although one could keep some or all of the includes under a __USE_MISC conditional, that seems unnecessary to me, especially given the lack of a <signal.h> include in the powerpc version meaning that portable programs already cannot rely on such an include. Tested for x86_64 and x86, and with build-many-glibcs.py. As with other such fixes, more namespace issues remain so this does not permit any XFAILs to be removed or bugs to be closed. [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/generic/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/i386/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h>. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h: Include <bits/types.h>. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t.
* Fix a bug in 'Remove __need macros from signal.h' (a992f506)Zack Weinberg2017-05-221-2/+0
| | | | | | | | | | | | | | | | | | | | | siginfo-arch.h is included in two different places, so the default definitions of the macros that it might or might not define need to be done conditionally afterward, not unconditionally beforehand. * sysdeps/unix/sysv/linux/bits/siginfo-consts.h (__SI_ASYNCIO_AFTER_SIGIO): Define default after including bits/siginfo-arch.h, only if not already defined. * sysdeps/unix/sysv/linux/bits/types/siginfo_t.h (__SI_ALIGNMENT, __SI_BAND_TYPE, __SI_CLOCK_T) (__SI_ERRNO_THEN_CODE, __SI_HAVE_SIGSYS, __SI_SEGFAULT_ADDL): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h: Unconditionally define __SI_* macros.
* Remove __need macros from signal.h.Zack Weinberg2017-05-203-360/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t, sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a scalar, so it's now directly available from bits/types.h. The others get bits/types/ headers. Side effects include: There have been small changes to which non-signal headers expose which subset of the signal-related types. A couple of architectures' nested siginfo_t fields had to be renamed to prevent undesired macro expansion. Internal code that wants to manipulate signal masks must now include <sigsetops.h> (which is not installed) and should be aware that __sigaddset, __sigandset, __sigdelset, __sigemptyset, and __sigorset no longer return a value (unlike the public API). Relatedly, the public signal.h no longer declares any of those functions. The obsolete sigmask() macro no longer has a system-specific definition -- in the cases where it matters, it didn't work anyway. New Linux architectures should create bits/siginfo-arch.h and/or bits/siginfo-consts-arch.h to customize their siginfo_t, rather than duplicating everything in bits/siginfo.h (which no longer exists). Add new __SI_* macros if necessary. Ports to other operating systems are strongly encouraged to generalize this scheme further. * bits/sigevent-consts.h * bits/siginfo-consts.h * bits/types/__sigset_t.h * bits/types/sigevent_t.h * bits/types/siginfo_t.h * sysdeps/unix/sysv/linux/bits/sigevent-consts.h * sysdeps/unix/sysv/linux/bits/siginfo-consts.h * sysdeps/unix/sysv/linux/bits/types/__sigset_t.h * sysdeps/unix/sysv/linux/bits/types/sigevent_t.h * sysdeps/unix/sysv/linux/bits/types/siginfo_t.h: New system-dependent bits headers. * sysdeps/unix/sysv/linux/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h: New Linux-only system-dependent bits headers. * signal/bits/types/sig_atomic_t.h * signal/bits/types/sigset_t.h * signal/bits/types/sigval_t.h: New non-system-dependent bits headers. * sysdeps/generic/sigsetops.h * sysdeps/unix/sysv/linux/sigsetops.h: New internal headers. * include/bits/types/sig_atomic_t.h * include/bits/types/sigset_t.h * include/bits/types/sigval_t.h: New wrappers. * signal/sigsetops.h * bits/siginfo.h * bits/sigset.h * sysdeps/unix/sysv/linux/bits/siginfo.h * sysdeps/unix/sysv/linux/bits/sigset.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo.h * sysdeps/unix/sysv/linux/mips/bits/siginfo.h * sysdeps/unix/sysv/linux/s390/bits/siginfo.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo.h * sysdeps/unix/sysv/linux/tile/bits/siginfo.h * sysdeps/unix/sysv/linux/x86/bits/siginfo.h: Deleted. * signal/Makefile, sysdeps/unix/sysv/linux/Makefile: Update lists of installed headers. * posix/bits/types.h: Define __sig_atomic_t here. * signal/signal.h: Use the new bits headers; no need to handle __need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask to define sigmask. * include/signal.h: No need to handle __need_sig_atomic_t nor __need_sigset_t. Don't define __sigemptyset. * io/sys/poll.h, setjmp/setjmp.h * sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h * sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h * sysdeps/mach/hurd/i386/bits/sigcontext.h * sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h * sysdeps/pthread/bits/sigthread.h * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h * sysdeps/unix/sysv/linux/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/s390/sys/ucontext.h * sysdeps/unix/sysv/linux/sh/sys/ucontext.h * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h * sysdeps/unix/sysv/linux/tile/sys/ucontext.h * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Use bits/types/__sigset_t.h. * misc/sys/select.h, posix/spawn.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/sys/epoll.h * sysdeps/unix/sysv/linux/sys/signalfd.h: Use bits/types/sigset_t.h. * resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h. * rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h. * socket/sys/socket.h: Don't include bits/sigset.h. * login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c * signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c * sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c * sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c * sysdeps/unix/sysv/linux/nptl-signals.h: Include sigsetops.h. * signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c * signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c: __sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset now return no value. * signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c Include <errno.h>, <signal.h>, and <sigsetops.h> instead of "sigsetops.h". * signal/sigsetops.c: Explicitly define __sigismember, __sigaddset, and __sigdelset as compatibility symbols. * signal/Versions: Correct commentary on __sigpause, __sigaddset, __sigdelset, __sigismember. * inet/rcmd.c: Include sigsetops.h. Convert old code using __sigblock/__sigsetmask to use __sigprocmask and friends.
* Split up bits/sigstack.h.Joseph Myers2017-05-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bits/sigstack.h contains four things: the legacy struct sigstack type, the preferred stack_t type, the SS_* enum values and macros for signal stack sizes. These vary in different ways between glibc configurations; in particular, the stack sizes vary much more than any of the other pieces. Furthermore, these pieces have different standard namespace rules for when they should be visible (not currently visible in conform/ results both because the relevant tests are XFAILed for sys/ucontext.h namespace issues, and because some of the expectations are incorrect in the same way as the headers, e.g. neither expectations nor headers reflect that current POSIX no longer has either the sigstack function or the sigstack structure). To reduce duplication of identical definitions, and facilitate namespace fixes without requiring the same feature test macro conditions to be repeated in many versions of the same header, this patch splits bits/sigstack.h up into four headers. It keeps the stack size macros, while new bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h are added for the other pieces. bits/types/struct_sigstack.h is the same everywhere, bits/types/stack_t.h has three variants different in the order of the structure elements (generic = MIPS Linux, and other Linux), and bits/ss_flags.h has generic and Linux variants. This patch includes the new headers everywhere that included <bits/sigstack.h>, so should cause no difference to what any public header defines. Subsequent namespace fixes would then remove or condition some of those includes. There should be no conflicts with Zack's changes to signal.h types, beyond the trivial conflict of both making additions to signal/Makefile's headers list; the two patches affect disjoint sets of types and other definitions. Tested for x86_64 and x86, and with build-many-glibcs.py. * bits/ss_flags.h: New file. * bits/types/stack_t.h: Likewise. * include/bits/types/struct_sigstack.h: Likewise. * signal/bits/types/struct_sigstack.h: Likewise. * sysdeps/unix/sysv/linux/bits/ss_flags.h: Likewise. * sysdeps/unix/sysv/linux/bits/types/stack_t.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h: Likewise. * signal/Makefile (headers): Add bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h. * signal/signal.h [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * bits/sigstack.h (struct sigstack): Remove. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/mips/bits/sigstack.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/arm/sys/ucontext.h: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * sysdeps/generic/sys/ucontext.h: Likewise. * sysdeps/i386/sys/ucontext.h: Likewise. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Likewise.
* Use __glibc_reserved convention in mcontext, sigcontext (bug 21457).Joseph Myers2017-05-042-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the most straightforward part of fixing namespace issues for sys/ucontext.h and related headers: where fields in sys/ucontext.h or bits/sigcontext.h are named "reserved", "padding" or similar, they are renamed to use the __glibc_reserved* naming convention. It does not change fields with a leading underscore, or even those with a prefix such as uc_ or sc_. It only fixes a small part of bug 21457, so no XFAILs are removed. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21457] * sysdeps/unix/sysv/linux/mips/sys/ucontext.h [_MIPS_SIM != _ABIO32] (mcontext_t): Rename field reserved to __glibc_reserved1. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h (struct _fpx_sw_bytes): Rename field padding to __glibc_reserved1. (struct _fpxreg): Likewise. [!__x86_64__] (struct _fpstate): Rename field reserved to __glibc_reserved1. Rename field padding to __glibc_reserved2. [__x86_64__] (struct _fpstate): Rename field padding to __glibc_reserved1. (struct _xsave_hdr): Rename field reserved1 to __glibc_reserved1. Rename field reserved2 to __glibc_reserved2. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h [__x86_64__] (struct _libc_fpxreg): Rename field padding to __glibc_reserved1. [__x86_64__] (struct _libc_fpstate): Rename field padding to __glibc_reserved1.
* Consolidate pthreadtype.h placementConsolidate pthreadtype.h placementAdhemerval Zanella2017-04-101-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch moves all arch specific pthreadtypes.h to a similar path for all architectures (sysdeps/unix/sysv/<arch>/bits). No functional or build change is expected. The idea is mainly to organize the header placement for all architectures. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * sysdeps/unix/sysv/linux/x86/Implies: New file. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h: Move to ... * sysdeps/alpha/nptl/bits/pthreadtypes.h: ... here. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Move to ... * sysdeps/powerpc/nptl/bits/pthreadtypes.h: ... here. * sysdeps/x86/bits/pthreadtypes.h: Move to ... * sysdeps/x86/nptl/bits/pthreadtypes.h: ... here.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-0137-37/+37
|
* Get rid of __elision_availableAndreas Schwab2016-12-072-9/+3
|
* Use C11-like atomics instead of plain memory accesses in x86 lock elision.Torvald Riegel2016-12-052-15/+31
| | | | | | | | | | | | | | | | | This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
* Consolidate Linux setrlimit and getrlimit implementationAdhemerval Zanella2016-11-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates all Linux setrlimit and getrlimit on the default sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions: 1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19 and higher due a broken RLIM64_INFINITY constant. 2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB limit. I am not sure if it is required, but a RLIM_INFINITY fix [1] change its definition without adding a compat symbol. This patch does not aim to address this possible issue, it follow current symbol export. The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64) and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This code path is only used on kernel older than 2.6.36 (basically now only x86) and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once x86 moves to be on par with other architectures regarding minimum kernel supported we can get rid of using old syscalls and default path. A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as default for 64 bits ports. This allows the default implementation to avoid {get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit. Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a sanity build plus check-abi on all other supported architectures. [1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8 Adhemerval Zanella <adhemerval.zanella@linaro.org> Yury Norov <ynorov@caviumnetworks.com> * bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define. * sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/typesizes.h [__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource] (sysdep_routines): Remove oldgetrlimit64. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file. * sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise. * sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove setrlimit and getrlimit. * sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/getrlimit.c: New file. * sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle __RLIM_T_MATCHES_RLIM64_T and add alias if defined. (__old_getrlimit64): Add compatibility symbol. * sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
* i386, x86: Use libc_ifunc macro for time, gettimeofday.Stefan Liebler2016-10-072-27/+27
| | | | | | | | | | | | | | | | | | | | | | | This patch uses the libc_ifunc_hidden macro to create already existing ifunc functions time and gettimeofday on intel. This way, the libc_hidden_def macro can be used instead of the libc_ifunc_hidden_def one which was only used here. Thus the macro is removed from libc-symbols.h. On i386, the __GI_* symbols do not target the ifunc symbol and thus the redirection construct has to be applied here. ChangeLog: * sysdeps/unix/sysv/linux/x86/gettimeofday.c (__gettimeofday): Use libc_ifunc_hidden macro. Use libc_hidden_def instead of libc_ifunc_hidden_def. * sysdeps/unix/sysv/linux/x86/time.c (time): Likewise. * sysdeps/unix/sysv/linux/i386/gettimeofday.c (__gettimeofday): Redirect ifunced function in header for using it as type of ifunc'ed function. Redefine libc_hidden_def to use fallback non ifunc'ed function for __GI_* symbol. * sysdeps/unix/sysv/linux/i386/time.c (time): Likewise. * include/libc-symbols.h (libc_ifunc_hidden_def, libc_ifunc_hidden_def1): Delete macro.
* Installed-header hygiene (BZ#20366): stack_t.Zack Weinberg2016-09-231-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sys/ucontext.h unconditionally uses stack_t, and it does not make sense to change that. But signal.h only declares stack_t under __USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is already in a bits header, bits/sigstack.h, but that header insists on only being included by signal.h, so we have to change that as well as all of the sys/ucontext.h variants. (Some but not all variants of bits/sigcontext.h, which sys/ucontext.h may also need, had already received this adjustment; for consistency, I made them all the same, even if that's not strictly necessary in some configurations.) bits/sigcontext.h and bits/sigstack.h also all need to receive multiple inclusion guards. * sysdeps/generic/sys/ucontext.h * sysdeps/arm/sys/ucontext.h * sysdeps/i386/sys/ucontext.h * sysdeps/m68k/sys/ucontext.h * sysdeps/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h * sysdeps/unix/sysv/linux/arm/sys/ucontext.h * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h * sysdeps/unix/sysv/linux/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/s390/sys/ucontext.h * sysdeps/unix/sysv/linux/sh/sys/ucontext.h * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h * sysdeps/unix/sysv/linux/tile/sys/ucontext.h * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Include both bits/sigcontext.h and bits/sigstack.h. Fix grammar error in comment, if present. * bits/sigstack.h * sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h * sysdeps/unix/sysv/linux/alpha/bits/sigstack.h * sysdeps/unix/sysv/linux/bits/sigstack.h * sysdeps/unix/sysv/linux/ia64/bits/sigstack.h * sysdeps/unix/sysv/linux/mips/bits/sigstack.h * sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h * sysdeps/unix/sysv/linux/sparc/bits/sigstack.h * bits/sigcontext.h * sysdeps/mach/hurd/i386/bits/sigcontext.h * sysdeps/unix/sysv/linux/bits/sigcontext.h * sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h * sysdeps/unix/sysv/linux/sparc/bits/sigcontext.h: Add multiple inclusion guard. Permit inclusion by sys/ucontext.h as well as signal.h, if this was not already allowed. Request definition of size_t if necessary. Minimize semantically-null differences across files.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-0437-37/+37
|
* Add __CPU_MASK_TYPE for __cpu_maskH.J. Lu2015-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since x86-64 and x32 use the same set of sched_XXX system call interface: [hjl@gnu-6 linux-stable]$ grep sched_ arch/x86/entry/syscalls/syscall_64.tbl 24 common sched_yield sys_sched_yield 142 common sched_setparam sys_sched_setparam 143 common sched_getparam sys_sched_getparam 144 common sched_setscheduler sys_sched_setscheduler 145 common sched_getscheduler sys_sched_getscheduler 146 common sched_get_priority_max sys_sched_get_priority_max 147 common sched_get_priority_min sys_sched_get_priority_min 148 common sched_rr_get_interval sys_sched_rr_get_interval 203 common sched_setaffinity sys_sched_setaffinity 204 common sched_getaffinity sys_sched_getaffinity 314 common sched_setattr sys_sched_setattr 315 common sched_getattr sys_sched_getattr [hjl@gnu-6 linux-stable]$ __cpu_mask should be unsigned long long, instead of unsigned long, for x32. This patch adds __CPU_MASK_TYPE so that each architecture can define the proper type for __cpu_mask. [BZ #19313] * bits/typesizes.h (__CPU_MASK_TYPE): New. * sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE): Likewise. * sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE): * sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace unsigned long int with __CPU_MASK_TYPE.
* Move x86_64 init-arch.h to sysdeps/x86/init-arch.hH.J. Lu2015-08-201-1/+0
| | | | | | | | | | | | Move sysdeps/x86_64/multiarch/init-arch.h to sysdeps/x86/init-arch.h which can be used for both i386 and x86_64. * sysdeps/i386/i686/multiarch/init-arch.h: Removed. * sysdeps/unix/sysv/linux/x86/init-arch.h: Likewise. * sysdeps/x86_64/cacheinfo.c: Include <init-arch.h> instead of "multiarch/init-arch.h". * sysdeps/x86_64/multiarch/init-arch.h: Renamed to ... * sysdeps/x86/init-arch.h: This.
* Remove x86 init-arch.cH.J. Lu2015-08-201-1/+0
| | | | | | | | Both files include sysdeps/x86_64/multiarch/init-arch.c which has been removed. * sysdeps/i386/i686/multiarch/init-arch.c: Removed. * sysdeps/unix/sysv/linux/x86/init-arch.c: Likewise.
* Use x86-64 cacheinfo.c and sysconf.c for x86H.J. Lu2015-08-191-0/+42
| | | | | | | | | | | | | | | Since _dl_x86_cpu_features is always available, we can use x86-64 cacheinfo.c and sysconf.c for both i386 and x86-64. * sysdeps/i386/i686/Makefile [$(subdir) == string] (sysdep_routines): Moved to ... * sysdeps/i386/Makefile: Here. * sysdeps/i386/i686/cacheinfo.c: Moved to ... * sysdeps/i386/cacheinfo.c: Here. * sysdeps/unix/sysv/linux/i386/sysconf.c: Removed. * sysdeps/unix/sysv/linux/i386/i686/sysconf.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysconf.c: Moved to ... * sysdeps/unix/sysv/linux/x86/sysconf.c: Here.
* Don't include <cpuid.h> in elision-conf.hH.J. Lu2015-08-131-1/+0
| | | | | | | Don't include the unused <cpuid.h> in Linux/x86 elision-conf.h. * sysdeps/unix/sysv/linux/x86/elision-conf.h: Don't include <cpuid.h>.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-08-19 13:06:19 +0000