| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Starting with commit e070501d12b47e88c1ff8c313f887976fb578938
"Replace __libc_multiple_threads with __libc_single_threaded"
the testcases nptl/tst-cancel-self and
nptl/tst-cancel-self-cancelstate are failing.
This is fixed by only defining SINGLE_THREAD_BY_GLOBAL on s390x,
but not on s390.
Starting with commit 09c76a74099826f4c6e1c4c431d7659f78112862
"Linux: Consolidate {RTLD_}SINGLE_THREAD_P definition",
SINGLE_THREAD_BY_GLOBAL was defined in
sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h.
Lateron the commit 9a973da617772eff1f351989f8995f4305a2e63c
"s390: Consolidate Linux syscall definition" consolidates the sysdep.h files
from s390-32/s390-64 subdirectories. Unfortunately the macro is now always
defined instead of only on s390-64.
As information:
TLS_MULTIPLE_THREADS_IN_TCB is also only defined for s390.
See: sysdeps/s390/nptl/tls.h
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
| |
|
|
|
|
|
|
|
|
| |
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
| |
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
| |
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
| |
|
|
|
|
|
|
| |
This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
posix_spawn_file_actions_addtcsetpgrp_np
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
| |
|
|
|
|
|
|
| |
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
It requires less boilerplate code for newer ports. The _Static_assert
checks from internal setjmp are moved to its own internal test since
setjmp.h is included early by multiple headers (to generate
rtld-sizes.sym).
The riscv jmp_buf-macros.h check is also redundant, it is already
done by riscv configure.ac.
Checked with a build for the affected architectures.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Linux 5.15 has one new syscall, process_mrelease (and also enables the
clone3 syscall for RV32). It also has a macro __NR_SYSCALL_MASK for
Arm, which is not a syscall but matches the pattern used for syscall
macro names.
Add __NR_SYSCALL_MASK to the names filtered out in the code dealing
with syscall lists, update syscall-names.list for the new syscall and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
|
| |
|
|
|
|
|
|
| |
Linux 5.14 has two new syscalls, memfd_secret (on some architectures
only) and quotactl_fd. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The malloc-check debugging feature is tightly integrated into glibc
malloc, so thanks to an idea from Florian Weimer, much of the malloc
implementation has been moved into libc_malloc_debug.so to support
malloc-check. Due to this, glibc malloc and malloc-check can no
longer work together; they use altogether different (but identical)
structures for heap management. This should not make a difference
though since the malloc check hook is not disabled anywhere.
malloc_set_state does, but it does so early enough that it shouldn't
cause any problems.
The malloc check tunable is now in the debug DSO and has no effect
when the DSO is not preloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Wean mtrace away from the malloc hooks and move them into the debug
DSO. Split the API away from the implementation so that we can add
the API to libc.so as well as libc_malloc_debug.so, with the libc
implementations being empty.
Update localplt data since memalign no longer has any callers after
this change.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split the mcheck implementation into the debugging hooks and API so
that the API can be replicated in libc and libc_malloc_debug.so. The
libc APIs always result in failure.
The mcheck implementation has also been moved entirely into
libc_malloc_debug.so and with it, all of the hook initialization code
can now be moved into the debug library. Now the initialization can
be done independently of libc internals.
With this patch, libc_malloc_debug.so can no longer be used with older
libcs, which is not its goal anyway. tst-vfork3 breaks due to this
since it spawns shell scripts, which in turn execute using the system
glibc. Move the test to tests-container so that only the built glibc
is used.
This move also fixes bugs in the mcheck version of memalign and
realloc, thus allowing removal of the tests from tests-mcheck
exclusion list.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The script was used with --no-new-version to move the symbols
__res_nquery, __res_nquerydomain, __res_nsearch, __res_query,
__res_querydomain, __res_search, res_query, res_querydomain,
res_search. The public symbols res_nquery, res_nquerydomain,
res_nsearch, res_ownok, res_query, res_querydomain, res_search
were added with make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The symbols res_mkquery, __res_mkquery, __res_nmkquery were
moved with the script (using --no-new-version).
res_mkquery@@GLIBC_2.34, res_nmkquery@@GLIBC_2.34 were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Switch to public symbols without __ prefix (due to improved
namespace management).
__res_send, __res_nsend were moved using the script (with
--no-new-version). res_send@@GLIBC_2.34 and res_nsend@@GLIBC_2.34
were added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reflects what the remaining functions in the file do.
The __res_dnok, __res_hnok, __res_mailok, __res_ownok were moved
with the script, using --no-new-version, and turned into compat
symbols. __libc_res_dnok@@GLIBC_PRIVATE and
__libc_res_hnok@@GLIBC_PRIVATE are added for internal use, to avoid
accidentally binding to compatibility symbols. The new public
symbols res_dnok, res_hnok, res_mailok, res_ownok were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And reformat it to GNU style.
dn_skipname is used outside glibc, so do not deprecate it,
and export it as dn_skipname (not __dn_skipname). Due to internal
users, provide a __libc_dn_skipname alias, and keep __dn_skipname
as a pure compatibility symbol.
__dn_skipname@GLIBC_2.0 was moved using the script, and
dn_skipname@@GLIBC_2.34 was added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And reformat it to GNU style.
dn_comp is used in various programs, so keep it as a non-deprecated
symbol. Switch to dn_comp (not __dn_comp) for the ABI name. There
are no internal users, so interposition is not a problem.
The __dn_comp symbol was moved with scripts/move-symbol-to-libc.py
--no-new-version. dn_comp@@GLIBC_2.34 was added with
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And reformat to GNU style.
This switches back to the dn_expand name for the ABI symbol and turns
__dn_expand into a compatibility symbol. With the improved namespace
management in current glibc, it is no longer necessary to use a
private namespace symbol. To avoid old code binding to a
GLIBC_PRIVATE symbol by accident, use __libc_dn_expand for the
internal symbol name.
The symbols dn_expand, __dnexpand were moved using
scripts/move-symbol-to-libc.py, followed by an adjustment to make
dn_expand the only GLIBC_2.34 symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
And reformat to GNU style.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
