about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux/powerpc
Commit message (Collapse)AuthorAgeFilesLines
...
* linux: Always define STAT_IS_KERNEL_STATAdhemerval Zanella2020-09-111-0/+1
| | | | | | | | It allows to check for its value instead of its existence. Checked with a build for all affected ABIS. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Update syscall lists for Linux 5.8.Joseph Myers2020-08-072-0/+2
| | | | | | | | Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* Linux: Remove rseq supportFlorian Weimer2020-07-165-41/+0
| | | | | | | | | | | | | | | | | | The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* powerpc64: Fix calls when r2 is not used [BZ #26173]Tulio Magno Quites Machado Filho2020-07-101-1/+1
| | | | | | | | | Teach the linker that __mcount_internal, __sigjmp_save_symbol, __syscall_error and __GI_exit do not use r2, so that it does not need to recover r2 after the call. Test at configure time if the assembler supports @notoc and define USE_PPC64_NOTOC.
* sysv: linux: Add 64-bit time_t variant for shmctlAdhemerval Zanella2020-07-092-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __shmctl64 is added and __shmctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_shmid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit shmctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes shmid_ds already contains 64-bit time_t fields and will result in just the __shmctl symbol using the __shmctl64 code. The shmid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using of the 64-bit one. The default 32-bit symbol will allocate and copy the shmid_ds over multiple buffers, but this should be deprecated in favor of the __shmctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysvipc: Remove the linux shm-pad.h fileAdhemerval Zanella2020-07-092-28/+46
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysv: linux: Add 64-bit time_t variant for msgctlAdhemerval Zanella2020-07-092-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __msgctl64 is added and __msgctl is change to call it instead (it adds some extra buffer coping for the 32 bit time_t implementation). Two new structures are added: 1. kernel_msqid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit msgctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes msqid_ds already contains 64-bit time_t fields and will result in just the __msgctl symbol using the __msgctl64 code. The msgid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit time_t. The default 32-bit symbol will allocate and copy the msqid_ds over multiple buffers, but this should be deprecated in favor of the __msgctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysvipc: Remove the linux msq-pad.h fileAdhemerval Zanella2020-07-092-26/+47
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysv: linux: Add 64-bit time_t variant for semctlAdhemerval Zanella2020-07-092-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different than others 64-bit time_t syscalls, the SysIPC interface does not provide a new set of syscall for y2038 safeness. Instead it uses unused fields in semid_ds structure to return the high bits for the timestamps. To provide a y2038 safe interface a new symbol __semctl64 is added and __semctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_semid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, sparc32) require specific implementations due their kernel ABI. 2. semid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit semctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes semid_ds already contains 64-bit time_t fields and will result in just the __semctl symbol using the __semctl64 code. The semid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low handling. It might be possible to optimize it further to avoid the kernel_semid64_ds to semun transformation if the exported ABI for the architectures matches the expected kernel ABI, but the implementation is already complex enough and don't think this should be a hotspot in any case. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit one. The default 32-bit symbol will allocate and copy the semid_ds over multiple buffers, but this should be deprecated in favor of the __semctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella2020-07-074-0/+8
| | | | | | | | | | | | | | | | | The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella2020-07-074-0/+8
| | | | | | | | | | | | | | | | | | The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Add the __libc_single_threaded variableFlorian Weimer2020-07-064-0/+4
| | | | | | | | | | | | | | The variable is placed in libc.so, and it can be true only in an outer libc, not libcs loaded via dlmopen or static dlopen. Since thread creation from inner namespaces does not work, pthread_create can update __libc_single_threaded directly. Using __libc_early_init and its initial flag, implementation of this variable is very straightforward. A future version may reset the flag during fork (but not in an inner namespace), or after joining all threads except one. Reviewed-by: DJ Delorie <dj@redhat.com>
* Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers2020-07-065-0/+41
| | | | | | | | | | | | | | | | | | | Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
* New exp10f version without SVID compat wrapperAdhemerval Zanella2020-06-194-0/+4
| | | | | | | | | | | | | | | | | | | | | | | This patch changes the exp10f error handling semantics to only set errno according to POSIX rules. New symbol version is introduced at GLIBC_2.32. The old wrappers are kept for compat symbols. There are some outliers that need special handling: - ia64 provides an optimized implementation of exp10f that uses ia64 specific routines to set SVID compatibility. The new symbol version is aliased to the exp10f one. - m68k also provides an optimized implementation, and the new version uses it instead of the sysdeps/ieee754/flt32 one. - riscv and csky uses the generic template implementation that does not provide SVID support. For both cases a new exp10f version is not added, but rather the symbols version of the generic sysdeps/ieee754/flt32 is adjusted instead. Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu.
* nptl: Add pthread_attr_setsigmask_np, pthread_attr_getsigmask_npFlorian Weimer2020-06-024-0/+8
| | | | | Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Move pthread_gettattr_np into libcFlorian Weimer2020-05-207-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Use __getline instead of __getdelim to avoid a localplt failure. Likewise for __getrlimit/getrlimit. The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_getattr_np F" >> $x done python3 scripts/move-symbol-to-libc.py --only-linux pthread_getattr_np The private export of __pthread_getaffinity_np is no longer needed, but the hidden alias still necessary so that the symbol can be exported with versioned_symbol. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Move pthread_getaffinity_np into libcFlorian Weimer2020-05-207-5/+11
| | | | | | | | | | | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_getaffinity_np F" >> $x done python3 scripts/move-symbol-to-libc.py pthread_getaffinity_np Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Move pthread_attr_setaffinity_np into libcFlorian Weimer2020-05-207-5/+11
| | | | | | | | | | | | | | | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> The symbol did not previously exist in libc, so a new GLIBC_2.32 symbol is needed, to get correct dependency for binaries which use the symbol but no longer link against libpthread. The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_attr_setaffinity_np F" >> $x done python3 scripts/move-symbol-to-libc.py pthread_attr_setaffinity_np Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* POWER: Add context-synchronizing instructions to pkey_write [BZ #25954]Florian Weimer2020-05-111-1/+1
| | | | | | | | | | | | | | | | | | | Sandipan Das reported that, "The Power ISA mandates that all writes to the Authority Mask Register (AMR) must always be preceded as well as succeeded by a context-synchronizing instruction. This applies to both the privileged and unprivileged variants of the Move To AMR instruction. This [requirement] is from Table 6 of Chapter 11 in page 1134 of Power ISA 3.0B. The document can be found here: <https://ibm.ent.box.com/s/1hzcwkwf8rbju5h9iyf44wm94amnlcrv> " See this kernel patch submission: <https://lore.kernel.org/linuxppc-dev/5f65cf37be993760de8112a88da194e3ccbb2bf8.1588959697.git.sandipan@linux.ibm.com/>
* semaphore: consolidate arch headers into a generic oneVineet Gupta2020-05-061-40/+0
| | | | | | | | | | | | | | | | | | This consolidates the copy-pasted arch specific semaphore header into single version (based on s390) which suffices 32-bit and and 64-bit arch/ABI based on the canonical WORDSIZE. For now I've left out arches which use alternate defines to choose for 32 vs 64-bit builds (aarch64, mips) which in theory can also use the same header. Passes build-many for aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64 x86_64-linux-gnu microblaze-linux-gnu nios2-linux-gnu Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* powerpc: Rename argN to _argN in LOADARGS_N [BZ #25902]H.J. Lu2020-04-301-12/+12
| | | | | | LOADARGS_N in powerpc/sysdep.h uses argN as local variables. It breaks when argN is also a function argument. Rename argN to _argN to avoid conflict.
* powerpc64le: Enable support for IEEE long doubleGabriel F. T. Gomes2020-04-303-0/+218
| | | | | | | | | | | | | | On platforms where long double may have two different formats, i.e.: the same format as double (64-bits) or something else (128-bits), building with -mlong-double-128 is the default and function calls in the user program match the name of the function in Glibc. When building with -mlong-double-64, Glibc installed headers redirect such calls to the appropriate function. Likewise, the internals of glibc are now built against IEEE long double. However, the only (minimally) notable usage of long double is difftime. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* semctl: Remove the sem-pad.h fileAlistair Francis2020-04-292-26/+39
| | | | | | | Remove the sem-pad.h file and instead have architectures override the struct semid_ds via the bits/types/struct_semid_ds.h file. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_sigmask implementation to libcAdhemerval Zanella2020-04-217-3/+8
| | | | | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> A new symbol version is added on libc to force loading failure instead of lazy binding one for newly binaries with old loaders. Checked with a build against all affected ABIs.
* Linux: Remove <sys/sysctl.h> and the sysctl functionFlorian Weimer2020-04-151-0/+29
| | | | | | | | | | | | | | | Linux 5.5 remove the system call in commit 61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove <sys/sysctl.h>"). Therefore, the compat function is just a stub that sets ENOSYS. Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore automatically. x32 already lacks the sysctl function, so an empty sysctl.c file is used to suppress it. Otherwise, a new compat symbol would be added. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update syscall lists for Linux 5.6.Joseph Myers2020-04-032-0/+4
| | | | | | | Linux 5.6 has new openat2 and pidfd_getfd syscalls. This patch adds them to syscall-names.list and regenerates the arch-syscall.h files. Tested with build-many-glibcs.py.
* nptl: Move pthread_setschedparam implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_getschedparam implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_cond_init implementation into libcFlorian Weimer2020-02-203-5/+0
| | | | | | | | | | | It is necessary to export __pthread_cond_init from libc because the C11 condition variable needs it and is still left in libpthread. This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_cond_destroy implementation into libcFlorian Weimer2020-02-203-5/+0
| | | | | | | | | | | It is necessary to export __pthread_cond_destroy from libc because the C11 condition variable needs it and is still left in libpthread. This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_condattr_init implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_condattr_destroy implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_setscope implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_getscope implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_setschedpolicy implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_getschedpolicy implementation into libcFlorian Weimer2020-02-203-3/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* y2038: linux: Provide __gettimeofday64 implementationLukasz Majewski2020-02-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the glibc the gettimeofday can use vDSO (on power and x86 the USE_IFUNC_GETTIMEOFDAY is defined), gettimeofday syscall or 'default' ___gettimeofday() from ./time/gettime.c (as a fallback). In this patch the last function (___gettimeofday) has been refactored and moved to ./sysdeps/unix/sysv/linux/gettimeofday.c to be Linux specific. The new __gettimeofday64 explicit 64 bit function for getting 64 bit time from the kernel (by internally calling __clock_gettime64) has been introduced. Moreover, a 32 bit version - __gettimeofday has been refactored to internally use __gettimeofday64. The __gettimeofday is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary check for time_t potential overflow and conversion of struct __timeval64 to 32 bit struct timespec. The iFUNC vDSO direct call optimization has been removed from both i686 and powerpc32 (USE_IFUNC_GETTIMEOFDAY is not defined for those architectures anymore). The Linux kernel does not provide a y2038 safe implementation of gettimeofday neither it plans to provide it in the future, clock_gettime64 should be used instead. Keeping support for this optimization would require to handle another build permutation (!__ASSUME_TIME64_SYSCALLS && USE_IFUNC_GETTIMEOFDAY) which adds more complexity and has limited use (since the idea is to eventually have a y2038 safe glibc build). Build tests: ./src/scripts/build-many-glibcs.py glibcs Run-time tests: - Run specific tests on ARM/x86 32bit systems (qemu): https://github.com/lmajewski/meta-y2038 and run tests: https://github.com/lmajewski/y2038-tests/commits/master Above tests were performed with Y2038 redirection applied as well as without to test proper usage of both __gettimeofday64 and __gettimeofday. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> [Including some commit message improvement]
* ld.so: Do not export free/calloc/malloc/realloc functions [BZ #25486]Florian Weimer2020-02-156-30/+0
| | | | | | | | | | | | | | | | | | | Exporting functions and relying on symbol interposition from libc.so makes the choice of implementation dependent on DT_NEEDED order, which is not what some compiler drivers expect. This commit replaces one magic mechanism (symbol interposition) with another one (preprocessor-/compiler-based redirection). This makes the hand-over from the minimal malloc to the full malloc more explicit. Removing the ABI symbols is backwards-compatible because libc.so is always in scope, and the dynamic loader will find the malloc-related symbols there since commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* linux: Remove INTERNAL_SYSCALL_DECLAdhemerval Zanella2020-02-146-16/+11
| | | | | | | | | | | With all Linux ABIs using the expected Linux kABI to indicate syscalls errors, the INTERNAL_SYSCALL_DECL is an empty declaration on all ports. This patch removes the 'err' argument on INTERNAL_SYSCALL* macro and remove the INTERNAL_SYSCALL_DECL usage. Checked with a build against all affected ABIs.
* linux: Consolidate INLINE_SYSCALLAdhemerval Zanella2020-02-141-30/+0
| | | | | | | | | | | With all Linux ABIs using the expected Linux kABI to indicate syscalls errors, there is no need to replicate the INLINE_SYSCALL. The generic Linux sysdep.h includes errno.h even for !__ASSEMBLER__, which is ok now and it allows cleanup some archaic code that assume otherwise. Checked with a build against all affected ABIs.
* powerpc: Use Linux kABI for syscall returnAdhemerval Zanella2020-02-141-7/+5
| | | | | | | | | | | | It changes the powerpc INTERNAL_VSYSCALL_CALL and INTERNAL_SYSCALL_NCS to return a negative value instead of the returning the CR value in the 'err' macro argument. The macro INTERNAL_SYSCALL_DECL is no longer required, and the INTERNAL_SYSCALL_ERROR_P macro follows the other Linux kABIs. Checked on powerpc64-linux-gnu, powerpc64le-linux-gnu, and powerpc-linux-gnu-power4.
* powerpc: Consolidate Linux syscall definitionAdhemerval Zanella2020-02-143-409/+209
| | | | | | | | | | | | | | | | | | | | | | | | The diferences between powerpc64{le} and powerpc32 Linux sysdep.h are: 1. On both vDSO and syscall macros the volatile registers r9, r10, r11, and r12 are used as input operands on powerpc32 and as clobber registers on powerpc64. However the outcome is essentially the same, it advertise the register might be clobbered by the kernel (although Linux won't leak register information to userland in such case). 2. The LOADARGS* macros uses a different size to check for invalid types. 3. The pointer mangling support guard pointer loading uses ABI specific instruction and register. This patch consolidates on only one sysdep by using the the powerpc64 version as default and add the adjustments required for powerpc32. Checked on powerpc64-linux-gnu, powerpc64le-linux-gnu, and powerpc-linux-gnu-power4.
* powerpc64: Add memory protection key support [BZ #23202]Florian Weimer2020-02-143-0/+145
| | | | | | | | | The 32-bit protection key behavior is somewhat unclear on 32-bit powerpc, so this change is restricted to the 64-bit variants. Flag translation is needed because of hardware differences between the POWER implementation (read and write flags) and the Intel implementation (write and read+write flags).
* powerpc: Move cache line size to rtld_global_roTulio Magno Quites Machado Filho2020-01-173-18/+14
| | | | | | | | | | | | | | GCC 10.0 enabled -fno-common by default and this started to point that __cache_line_size had been implemented in 2 different places: loader and libc. In order to avoid this duplication, the libc variable has been removed and the loader variable is moved to rtld_global_ro. File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order to reuse code for both static and dynamic linking scenarios. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* powerpc: Initialize rtld_global_ro for static dlopen [BZ #20802]Tulio Magno Quites Machado Filho2020-01-171-2/+11
| | | | | | | Initialize dl_auxv, dl_hwcap and dl_hwcap2 in rtld_global_ro for DSOs that have been statically dlopen'ed. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* linux: Add support for clock_getres64 vDSOAdhemerval Zanella2020-01-031-1/+2
| | | | | | | | No architecture currently defines the vDSO symbol. On archictures with 64-bit time_t the HAVE_CLOCK_GETRES_VSYSCALL is renamed to HAVE_CLOCK_GETRES64_VSYSCALL, it simplifies clock_gettime code. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* linux: Add support for clock_gettime64 vDSOAdhemerval Zanella2020-01-031-0/+4
| | | | | | | | No architecture currently defines the vDSO symbol. On architectures with 64-bit time_t the HAVE_CLOCK_GETTIME_VSYSCALL is renamed to HAVE_CLOCK_GETTIME64_VSYSCALL, it simplifies clock_gettime code. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* elf: Move vDSO setup to rtld (BZ#24967)Adhemerval Zanella2020-01-034-64/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch moves the vDSO setup from libc to loader code, just after the vDSO link_map setup. For static case the initialization is moved to _dl_non_dynamic_init instead. Instead of using the mangled pointer, the vDSO data is set as attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for static). It is read-only even with partial relro. It fixes BZ#24967 now that the vDSO pointer is setup earlier than malloc interposition is called. Also, vDSO calls should not be a problem for static dlopen as indicated by BZ#20802. The vDSO pointer would be zero-initialized and the syscall will be issued instead. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and sparcv9-linux-gnu. I also run some tests on mips. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* linux: Consolidate time implementationAdhemerval Zanella2020-01-031-30/+2
| | | | | | | | | | | The IFUNC bypass to vDSO is used when USE_IFUNC_TIME is set. Currently powerpc and x86 defines it. Otherwise the generic implementation is used, which calls clock_gettime. Checked on powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu-power4, x86_64-linux-gnu, and i686-linux-gnu. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* linux: Consolidate Linux gettimeofdayAdhemerval Zanella2020-01-031-33/+2
| | | | | | | | | | | | The IFUNC bypass to vDSO is used when USE_IFUNC_GETTIMEOFDAY is set. Currently aarch64, powerpc*, and x86 defines it. Otherwise the generic implementation is used, which calls clock_gettime. Checked on aarch64-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu-power4, x86_64-linux-gnu, and i686-linux-gnu. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-13 23:38:41 +0000