about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux/powerpc/powerpc64
Commit message (Collapse)AuthorAgeFilesLines
* nptl: Remove __libc_allocate_rtsig, __libc_current_sigrtmax, and ↵Adhemerval Zanella2021-03-262-6/+0
| | | | | | | | __libc_current_sigrtmin The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Move sigaction to libcAdhemerval Zanella2021-03-262-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove pthread raise implementationAdhemerval Zanella2021-03-262-2/+0
| | | | | | | | | | The Linux version already target the current thread by using tgkill along with getpid and gettid. For arm, libpthread does not do a intra PLT since it will call the raise from libc. Checked on x86_64-linux-gnu.
* nptl: Move pthread_kill to libcAdhemerval Zanella2021-03-264-2/+4
| | | | | | A new 2.34 version is also provided. Checked on x86_64-linux-gnu.
* nptl: Remove pwrite from libpthreadAdhemerval Zanella2021-03-262-6/+0
| | | | | | | The libc version is identical and built with same flags, it is also uses as the default version. Checked on x86_64-linux-gnu.
* nptl: Remove pread from libpthreadAdhemerval Zanella2021-03-262-6/+0
| | | | | | | The libc version is identical and built with same flags, it is also uses as the default version. Checked on x86_64-linux-gnu.
* nptl: Remove open from libpthreadAdhemerval Zanella2021-03-262-8/+0
| | | | | | | The libc version is identical and built with same flags. The libc version is set as the default version. Checked on x86_64-linux-gnu.
* nptl: Remove lseek from libpthreadAdhemerval Zanella2021-03-262-6/+0
| | | | | | | | | | | The libc version is identical and built with same flags. The libc version is set as the default version. The libpthread compat symbol requires to mask it when building the loader object otherwise ld might complain about a missing versioned symbol (as for alpha). Checked on x86_64-linux-gnu.
* nptl: Remove send from libpthreadAdhemerval Zanella2021-03-262-4/+0
| | | | | | | | | | | | | The libc version is identical and built with same flags. Both aarch64 and nios2 also requires to export __send and tt was done previously with the HAVE_INTERNAL_SEND_SYMBOL (which forced the symbol creation). All __send callers are internal to libc and the original issue that required the symbol export was due a missing libc_hidden_def. So a compat symbol is added for __send and the libc_hidden_def is defined regardless. Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl: Move system to libcAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Move fcntl from libpthreadAdhemerval Zanella2021-03-182-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove sendmsg from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove recvmsg from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove sigwait from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove tcdrain from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove pause from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove msync from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove fsync from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove sendto from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove recvfrom from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove recv from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove connect from libpthreadAdhemerval Zanella2021-03-182-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove accept from libpthreadAdhemerval Zanella2021-03-182-2/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove close from libpthreadAdhemerval Zanella2021-03-182-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove read from libpthreadAdhemerval Zanella2021-03-182-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Remove write from libpthreadAdhemerval Zanella2021-03-182-4/+0
| | | | | | The libc version is identical and built with same flags. Checked on x86_64-linux-gnu.
* nptl: Move fork into libcAdhemerval Zanella2021-03-122-4/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Checked on x86_64-linux-gnu.
* Reduce the statically linked startup code [BZ #23323]Florian Weimer2021-02-252-0/+2
| | | | | | | | | | | | | | | | | | | It turns out the startup code in csu/elf-init.c has a perfect pair of ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A New Method to Bypass 64-bit Linux ASLR"). These functions are not needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY are already processed by the dynamic linker. However, the dynamic linker skipped the main program for some reason. For maximum backwards compatibility, this is not changed, and instead, the main map is consulted from __libc_start_main if the init function argument is a NULL pointer. For statically linked binaries, the old approach based on linker symbols is still used because there is nothing else available. A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because new binaries running on an old libc would not run their ELF constructors, leading to difficult-to-debug issues.
* Update syscall lists for Linux 5.11.Joseph Myers2021-02-191-0/+1
| | | | | | | | Linux 5.11 has one new syscall, epoll_pwait2. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* linux: Set default kernel_stat.h to LFSAdhemerval Zanella2021-02-111-22/+0
| | | | | | | | | | | | | | The XSTAT_IS_XSTAT64 and STAT_IS_KERNEL_STAT flags are now set to 1 and STATFS_IS_STATFS64 is set to __STATFS_MATCHES_STATFS64. This makes the default ABI for newer ports to provide only LFS calls. A copy of non-LFS support is provided to 32-bit ABIS with non-LFS support (arm, csky, i386, m68k, nios2, s390, and sh). Is also allows to remove the 64-bit ports, which already uses the default values. This patch does not change the code generation. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* linux: Fix STATFS_IS_STATFS64 definitionAdhemerval Zanella2021-02-111-1/+1
| | | | | | | | | | | | | | | aarch64, arc, ia64, mips64, powerpc64, riscv32, riscv64, s390x, sparc64, and x86_64 defines STATFS_IS_STATFS64 to 0, but all of them alias statfs to statfs64 and the struct statfs has the same and layout of struct statfs64. The correct definition will be used on the [f]statfs[64] consolidation. This patch does not change code generation since the symbols are implemented using the auto-generation syscall for all the aforementioned ABIs. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* powerpc64: Select POWER9 machine for the scv instructionFlorian Weimer2021-01-221-0/+3
| | | | | | | | | It is not available with the baseline ISA. Fixes commit 68ab82f56690ada86ac1e0c46bad06ba189a10ef ("powerpc: Runtime selection between sc and scv for syscalls"). Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-0217-17/+17
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* powerpc: Use scv instruction on clone when availableMatheus Castanho2020-12-301-3/+30
| | | | | | | | | | clone already uses r31 to temporarily save input arguments before doing the syscall, so we use a different register to read from the TCB. We can also avoid allocating another stack frame, which is not needed since we can simply extend the usage of the red zone. Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com> Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* powerpc: Runtime selection between sc and scv for syscallsMatheus Castanho2020-12-302-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux kernel v5.9 added support for system calls using the scv instruction for POWER9 and later. The new codepath provides better performance (see below) if compared to using sc. For the foreseeable future, both sc and scv mechanisms will co-exist, so this patch enables glibc to do a runtime check and use scv when it is available. Before issuing the system call to the kernel, we check hwcap2 in the TCB for PPC_FEATURE2_SCV to see if scv is supported by the kernel. If not, we fallback to sc and keep the old behavior. The kernel implements a different error return convention for scv, so when returning from a system call we need to handle the return value differently depending on the instruction we used to enter the kernel. For syscalls implemented in ASM, entry and exit are implemented by different macros (PSEUDO and PSEUDO_RET, resp.), which may be used in sequence (e.g. for templated syscalls) or with other instructions in between (e.g. clone). To avoid accessing the TCB a second time on PSEUDO_RET to check which instruction we used, the value read from hwcap2 is cached on a non-volatile register. This is not needed when using INTERNAL_SYSCALL macro, since entry and exit are bundled into the same inline asm directive. The dynamic loader may issue syscalls before the TCB has been setup so it always uses sc with no extra checks. For the static case, there is no compile-time way to determine if we are inside startup code, so we also check the value of the thread pointer before effectively accessing the TCB. For such situations in which the availability of scv cannot be determined, sc is always used. Support for scv in syscalls implemented in their own ASM file (clone and vfork) will be added later. For now simply use sc as before. Average performance over 1M calls for each syscall "type": - stat: C wrapper calling INTERNAL_SYSCALL - getpid: templated ASM syscall - syscall: call to gettid using syscall function Standard: stat : 1.573445 us / ~3619 cycles getpid : 0.164986 us / ~379 cycles syscall : 0.162743 us / ~374 cycles With scv: stat : 1.537049 us / ~3535 cycles <~ -84 cycles / -2.32% getpid : 0.109923 us / ~253 cycles <~ -126 cycles / -33.25% syscall : 0.116410 us / ~268 cycles <~ -106 cycles / -28.34% Tested on powerpc, powerpc64, powerpc64le (with and without scv) Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com> Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Update syscall lists for Linux 5.10.Joseph Myers2020-12-161-0/+1
| | | | | | | | Linux 5.10 has one new syscall, process_madvise. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* linux: Consolidate brk implementationAdhemerval Zanella2020-12-101-43/+0
| | | | | | | | | | | | | | | It removes all the arch-specific assembly implementation. The outliers are alpha, where its kernel ABI explict return -ENOMEM in case of failure; and i686, where it can't use "call *%gs:SYSINFO_OFFSET" during statup in static PIE. Also some ABIs exports an additional ___brk_addr symbol and to handle it an internal HAVE_INTERNAL_BRK_ADDR_SYMBOL is added. Checked on x86_64-linux-gnu, i686-linux-gnu, adn with builsd for the affected ABIs. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Update syscall lists for Linux 5.9.Joseph Myers2020-10-231-0/+1
| | | | | | | | Linux 5.9 has one new syscall, close_range. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* Remove mknod wrapper functions, move them to symbolsAdhemerval Zanella2020-10-092-0/+4
| | | | | | | | | | | | | | | | | | | This patch removes the mknod and mknodat static wrapper and add the symbols on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to the arch-specific xstatver.h file. Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Remove stat wrapper functions, move them to exported symbolsAdhemerval Zanella2020-10-092-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64, fstatat, and fstatat64 static wrapper and add the symbol on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to a arch-specific xstatver.h file. The internal defines that redirects internals {f}stat{at} to their {f}xstat{at} counterparts are removed for Linux (!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls extra objects that makes the loader build fail otherwise (I haven't dig into why exactly). Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Update mallinfo2 ABI, and testDJ Delorie2020-09-172-0/+2
| | | | | | | This patch adds the ABI-related bits to reflect the new mallinfo2 function, and adds a test case to verify basic functionality. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* linux: Define STAT64_IS_KERNEL_STAT64Adhemerval Zanella2020-09-111-0/+1
| | | | | | | | | | | It indicates that the glibc export stat64 is similar in size and layout of the kernel stat64 used on the syscall. It is not currently used on stat implementation, but the idea is to indicate whether to use the kernel_stat to issue on the syscall on the *stat*64 variant (more specifically on mips which its exported ABI does not match the kernel). Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Update syscall lists for Linux 5.8.Joseph Myers2020-08-071-0/+1
| | | | | | | | Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
* Linux: Remove rseq supportFlorian Weimer2020-07-162-2/+0
| | | | | | | | | | | | | | | | | | The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* powerpc64: Fix calls when r2 is not used [BZ #26173]Tulio Magno Quites Machado Filho2020-07-101-1/+1
| | | | | | | | | Teach the linker that __mcount_internal, __sigjmp_save_symbol, __syscall_error and __GI_exit do not use r2, so that it does not need to recover r2 after the call. Test at configure time if the assembler supports @notoc and define USE_PPC64_NOTOC.
* string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella2020-07-072-0/+4
| | | | | | | | | | | | | | | | | The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella2020-07-072-0/+4
| | | | | | | | | | | | | | | | | | The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Add the __libc_single_threaded variableFlorian Weimer2020-07-062-0/+2
| | | | | | | | | | | | | | The variable is placed in libc.so, and it can be true only in an outer libc, not libcs loaded via dlmopen or static dlopen. Since thread creation from inner namespaces does not work, pthread_create can update __libc_single_threaded directly. Using __libc_early_init and its initial flag, implementation of this variable is very straightforward. A future version may reset the flag during fork (but not in an inner namespace), or after joining all threads except one. Reviewed-by: DJ Delorie <dj@redhat.com>
* Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers2020-07-062-0/+2
| | | | | | | | | | | | | | | | | | | Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
* New exp10f version without SVID compat wrapperAdhemerval Zanella2020-06-192-0/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch changes the exp10f error handling semantics to only set errno according to POSIX rules. New symbol version is introduced at GLIBC_2.32. The old wrappers are kept for compat symbols. There are some outliers that need special handling: - ia64 provides an optimized implementation of exp10f that uses ia64 specific routines to set SVID compatibility. The new symbol version is aliased to the exp10f one. - m68k also provides an optimized implementation, and the new version uses it instead of the sysdeps/ieee754/flt32 one. - riscv and csky uses the generic template implementation that does not provide SVID support. For both cases a new exp10f version is not added, but rather the symbols version of the generic sysdeps/ieee754/flt32 is adjusted instead. Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-01 03:58:02 +0000