about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux/ia64
Commit message (Collapse)AuthorAgeFilesLines
* ipc: Refactor sysvipc internal definitionsAdhemerval Zanella2019-10-171-21/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch refactor the internal sysvipc in two main points: 1. Add a new __ASSUME_SYSVIPC_DEFAULT_IPC_64 to infer the __IPC_64 value to be used along either the multiplexed __NR_ipc or wired-up syscall. The defaut value assumed for __IPC_64 is also changed from 0x100 to 0x0, aligning with Linux generic UAPI. The idea is to simplify the Linux 5.1 wire-up for sysvipc syscalls for some 32-bit ABIs (which expectes __IPC_64 being 0x0) and simplify new ports (which will no longer need to add ipc_priv.h). 2. It also removes some duplicated internal definition used on compat sysvipc symbols defined at ipc_priv.h (more specifically the __old_ipc_perm, SEMCTL_ARG_ADDRESS, MSGRCV_ARGS, and SEMTIMEDOP_IPC_ARGS). The idea is also to make it simpler to enable the new wire-up sysvipc syscall provided by Linux v5.1. There is no semantic change expected on any port. Checked with a build against all affected ABIs. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* Add PTRACE_GET_SYSCALL_INFO from Linux 5.3 to sys/ptrace.h.Joseph Myers2019-10-141-1/+5
| | | | | | | | | | | | | Linux 5.3 adds a PTRACE_GET_SYSCALL_INFO constant, with an associated structure and PTRACE_SYSCALL_INFO_* constants. This patch adds these to sys/ptrace.h in glibc (PTRACE_GET_SYSCALL_INFO in each architecture version, the rest in bits/ptrace-shared.h). As with previous such constants and associated structures, the glibc version of the structure is named struct __ptrace_syscall_info. Tested for x86_64, and with build-many-glibcs.py.
* sysvipc: Set ipc_perm mode as mode_t (BZ#18231)Adhemerval Zanella2019-10-101-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the mode field in ipc_perm as mode_t for all architectures, as POSIX specification [1]. The changes required are as follow: 1. It moves the ipc_perm definition out of ipc.h to its own header ipc_perm.h. It also allows consolidate the IPC_* definition on only one header. 2. The generic implementation follow the kernel ipc64_perm size so the syscall can be made directly without temporary buffer copy. However, since glibc defines the MODE field as mode_t, it omits the __PAD1 field (since glibc does not export mode_t as 16-bit for any architecture). It is a two-fold improvement: 2.1. New implementation which follow Linux UAPI will not need to provide an arch-specific ipc-perm.h header neither wrongly use the wrong 16-bit definition from previous default ipc.h (as csky did). 2.1. It allows consolidate ipc_perm definition for architectures that already provide mode_t as 32-bit. 3. All kernel ABIs for the supported architectures already provides the expected padding for mode type extension to 32-bit. However, some architectures the padding has the wrong placement, so it requires the ipc control routines (msgctl, semctl, and shmctl) to adjust the mode field accordingly. Currently they are armeb, microblaze, m68k, s390, and sheb. A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the required ABIs define. 4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also require compat symbols that do not adjust the mode field. Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu, sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu. I also did a sanity test against armeb qemu usermode for the sysvipc tests. [BZ #18231] * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/ipc-perm.h. * sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file. * sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/s390/kernel-features.h [!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/sh/kernel-features.h (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to bits/ipc-perm.h. * sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/kernel-features.h: Add comment about __ASSUME_SYSVIPC_BROKEN_MODE_T semantic. * sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as 2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined. (msgctl_syscall, __msgctl_mode16): New symbol. (__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T. * sysdeps/unix/sysv/linux/semctl.c: Likewise. * sysdeps/unix/sysv/linux/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add msgctl, semctl, and shmctl. * sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise. * conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t mode for Hurd. * sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add msgctl, semctl, and shmctl. * sysdeps/unix/sysv/linux/arm/be/Versions: New file. * sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise. * sysdeps/unix/sysv/linux/sh/be/Versions: Likewise. [1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
* nptl: Move pthread_attr_setschedparam implementation into libcFlorian Weimer2019-10-071-1/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_getschedparam implementation into libcFlorian Weimer2019-10-071-1/+0
| | | | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_setinheritsched implementation into libc.Florian Weimer2019-10-041-1/+0
| | | | | | This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
* Split up endian.h to minimize exposure of BYTE_ORDER.Alistair Francis2019-10-011-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With only two exceptions (sys/types.h and sys/param.h, both of which historically might have defined BYTE_ORDER) the public headers that include <endian.h> only want to be able to test __BYTE_ORDER against __*_ENDIAN. This patch creates a new bits/endian.h that can be included by any header that wants to be able to test __BYTE_ORDER and/or __FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs __LONG_LONG_PAIR. It only defines macros in the implementation namespace. The existing bits/endian.h (which could not be included independently of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER) is renamed to bits/endianness.h. I also took the opportunity to canonicalize the form of this header, which we are stuck with having one copy of per architecture. Since they are so short, this means git doesn’t understand that they were renamed from existing headers, sigh. endian.h itself is a nonstandard header and its only remaining use from a standard header is guarded by __USE_MISC, so I dropped the __USE_MISC conditionals from around all of the public-namespace things it defines. (This means, an application that requests strict library conformance but includes endian.h will still see the definition of BYTE_ORDER.) A few changes to specific bits/endian(ness).h variants deserve mention: - sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did have selectable endianness, but we have assembly code in sysdeps/ia64 that assumes it’s little-endian, so there is no reason to treat the ia64 endianness.h as linux-specific. - The C-SKY port does not fully support big-endian mode, the compile will error out if __CSKYBE__ is defined. - The PowerPC port had extra logic in its bits/endian.h to detect a broken compiler, which strikes me as unnecessary, so I removed it. - The only files that defined __FLOAT_WORD_ORDER always defined it to the same value as __BYTE_ORDER, so I removed those definitions. The SH bits/endian(ness).h had comments inconsistent with the actual setting of __FLOAT_WORD_ORDER, which I also removed. - I *removed* copyright boilerplate from the few bits/endian(ness).h headers that had it; these files record a single fact in a fashion dictated by an external spec, so I do not think they are copyrightable. As long as I was changing every copy of ieee754.h in the tree, I noticed that only the MIPS variant includes float.h, because it uses LDBL_MANT_DIG to decide among three different versions of ieee854_long_double. This patch makes it not include float.h when GCC’s intrinsic __LDBL_MANT_DIG__ is available. * string/endian.h: Unconditionally define LITTLE_ENDIAN, BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping macros only on !__ASSEMBLER__. Move the definitions of __BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER, and __LONG_LONG_PAIR to... * string/bits/endian.h: ...this new file, which includes the renamed header bits/endianness.h for the definition of __BYTE_ORDER and possibly __FLOAT_WORD_ORDER. * string/Makefile: Install bits/endianness.h. * include/bits/endian.h: New wrapper. * bits/endian.h: Rename to bits/endianness.h. Add multiple-include guard. Rewrite the comment explaining what the machine-specific variants of this file should do. * sysdeps/unix/sysv/linux/ia64/bits/endian.h: Move to sysdeps/ia64. * sysdeps/aarch64/bits/endian.h * sysdeps/alpha/bits/endian.h * sysdeps/arm/bits/endian.h * sysdeps/csky/bits/endian.h * sysdeps/hppa/bits/endian.h * sysdeps/ia64/bits/endian.h * sysdeps/m68k/bits/endian.h * sysdeps/microblaze/bits/endian.h * sysdeps/mips/bits/endian.h * sysdeps/nios2/bits/endian.h * sysdeps/powerpc/bits/endian.h * sysdeps/riscv/bits/endian.h * sysdeps/s390/bits/endian.h * sysdeps/sh/bits/endian.h * sysdeps/sparc/bits/endian.h * sysdeps/x86/bits/endian.h: Rename to endianness.h; canonicalize form of file; remove redundant definitions of __FLOAT_WORD_ORDER. * sysdeps/powerpc/bits/endianness.h: Remove logic to check for broken compilers. * ctype/ctype.h * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h * sysdeps/arm/nptl/bits/pthreadtypes-arch.h * sysdeps/csky/nptl/bits/pthreadtypes-arch.h * sysdeps/ia64/ieee754.h * sysdeps/ieee754/ieee754.h * sysdeps/ieee754/ldbl-128/ieee754.h * sysdeps/ieee754/ldbl-128ibm/ieee754.h * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h * sysdeps/mips/ieee754/ieee754.h * sysdeps/mips/nptl/bits/pthreadtypes-arch.h * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h * sysdeps/nptl/pthread.h * sysdeps/riscv/nptl/bits/pthreadtypes-arch.h * sysdeps/sh/nptl/bits/pthreadtypes-arch.h * sysdeps/sparc/sparc32/ieee754.h * sysdeps/unix/sysv/linux/generic/bits/stat.h * sysdeps/unix/sysv/linux/generic/bits/statfs.h * sysdeps/unix/sysv/linux/sys/acct.h * wctype/bits/wctype-wchar.h: Include bits/endian.h, not endian.h. * sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h. * sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__ in ifdefs, instead of LDBL_MANT_DIG. Only include float.h when __LDBL_MANT_DIG__ is not predefined, in which case define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-0753-53/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Finish move of clock_* functions to libc. [BZ #24959]Zack Weinberg2019-09-042-5/+5
| | | | | | | | | | | | | | | | In glibc 2.17, the functions clock_getcpuclockid, clock_getres, clock_gettime, clock_nanosleep, and clock_settime were moved from librt.so to libc.so, leaving compatibility stubs behind. Now that the dynamic linker no longer insists on finding versioned symbols in the same library that originally defined them, we do not need the stubs anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases for most of the functions anymore either. (clock_gettime still needs one.) For ports added before 2.17, libc.so needs to provide two symbol versions for each, the default at GLIBC_2.17 plus a compat version matching what librt had. While I'm at it, move the clock_*.c files and their tests from rt/ to time/.
* nptl: Move pthread_attr_getinheritsched implementation into libcFlorian Weimer2019-08-301-1/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer2019-08-281-1/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Fix spellings of contributor names in comments and docPaul Eggert2019-08-231-1/+1
|
* Refactor sigcontextinfo.hAdhemerval Zanella2019-08-232-33/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
* nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer2019-08-161-1/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_init implementation into libcFlorian Weimer2019-08-151-1/+0
| | | | | Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.
* Make totalorder and totalordermag functions take pointer arguments.Joseph Myers2019-08-151-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* nptl: Remove pthread_self compatibility symbol from libpthreadFlorian Weimer2019-08-151-1/+0
| | | | | The symbol is no longer needed because since glibc 2.30, the dynamic loader continues searching for the symbol in libc.
* nptl: Move pthread_attr_destroy implementation into libcFlorian Weimer2019-08-151-1/+0
|
* nptl: Move pthread_equal implementation into libcFlorian Weimer2019-08-151-1/+0
|
* nptl: Add POSIX-proposed pthread_mutex_clocklockMike Crowe2019-07-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add POSIX-proposed pthread_mutex_clocklock function that works like pthread_mutex_timedlock but takes a clockid parameter to measure the abstime parameter against. * sysdeps/nptl/pthread.h: Add pthread_mutex_clocklock. * nptl/DESIGN-systemtap-probes.txt: Likewise. * nptl/pthread_mutex_timedlock.c (__pthread_mutex_clocklock_common): Rename from __pthread_mutex_timedlock and add clockid parameter. Pass this parameter to lll_clocklock and lll_clocklock_elision in place of CLOCK_REALTIME. (__pthread_mutex_clocklock): New function to add LIBC_PROBE and validate clockid parameter before calling __pthread_mutex_clocklock_common. (__pthread_mutex_timedlock): New implementation to add LIBC_PROBE and calls __pthread_mutex_clocklock_common passing CLOCK_REALTIME as the clockid. * nptl/Makefile: Add tst-mutex11.c. * nptl/tst-abstime.c (th): Add tests for pthread_mutex_clocklock. * nptl/tst-mutex11.c: New tests for passing invalid and unsupported clockid parameters to pthread_mutex_clocklock. * nptl/tst-mutex5.c (do_test_clock): Rename from do_test and take clockid parameter to indicate which clock to be used. Call pthread_mutex_timedlock or pthread_mutex_clocklock as appropriate. (do_test): Call do_test_clock to separately test pthread_mutex_timedlock, pthread_mutex_clocklock(CLOCK_REALTIME) and pthread_mutex_clocklock(CLOCK_MONOTONIC). * nptl/tst-mutex9.c: Likewise. * nptl/Versions (GLIBC_2.30): Add pthread_mutex_clocklock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add POSIX-proposed pthread_rwlock_clockrdlock & pthread_rwlock_clockwrlockMike Crowe2019-07-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add: int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) and: int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) which behave like pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock respectively, except they always measure abstime against the supplied clockid. The functions currently support CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other clock is specified. * sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and pthread_wrlock_clockwrlock. * nptl/Makefile: Build pthread_rwlock_clockrdlock.c and pthread_rwlock_clockwrlock.c. * nptl/pthread_rwlock_clockrdlock.c: Implement pthread_rwlock_clockrdlock. * nptl/pthread_rwlock_clockwrlock.c: Implement pthread_rwlock_clockwrlock. * nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add clockid parameter and verify that it indicates a supported clock on entry so that we fail even if it doesn't end up being used. Pass that clock on to futex_abstimed_wait when necessary. (__pthread_rwlock_wrlock_full): Likewise. * nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't be used because there's no timeout. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't be used because there is no timeout. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime uses that clock. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime uses that clock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock timeout tests to match the existing pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests. * nptl/tst-rwlock14.c (do_test): Likewise. * nptl/tst-rwlock6.c Invent verbose_printf macro, and use for ancillary output throughout. (tf): Accept thread_args structure so that rwlock, a clockid and function name can be passed to the thread. (do_test_clock): Rename from do_test. Accept clockid parameter to specify test clock. Use the magic clockid value of CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock should be tested, otherwise pass the specified clockid to pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * nptl/tst-rwlock7.c: Likewise. * nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept thread_args structure so that the (now int) thread number, the clockid and the function name can be passed to the thread. (do_test_clock): Renamed from do_test. Pass the necessary thread_args when creating the reader and writer threads. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * manual/threads.texi: Add documentation for pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add POSIX-proposed pthread_cond_clockwaitMike Crowe2019-07-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add: int pthread_cond_clockwait (pthread_cond_t *cond, pthread_mutex_t *mutex, clockid_t clockid, const struct timespec *abstime) which behaves just like pthread_cond_timedwait except it always measures abstime against the supplied clockid. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and returns EINVAL if any other clock is specified. Includes feedback from many others. This function was originally proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group preferred the new name. * nptl/Makefile: Add tst-cond26 and tst-cond27 * nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait * sysdeps/nptl/pthread.h: Likewise * nptl/forward.c: Add __pthread_cond_clockwait * nptl/forward.c: Likewise * nptl/pthreadP.h: Likewise * sysdeps/nptl/pthread-functions.h: Likewise * nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add clockid parameter and comment describing why we don't need to check its value. Use that value when calling futex_abstimed_wait_cancelable rather than reading the clock from the flags. (__pthread_cond_wait): Pass unused clockid parameter. (__pthread_cond_timedwait): Read clock from flags and pass it to __pthread_cond_wait_common. (__pthread_cond_clockwait): Add new function with weak alias from pthread_cond_clockwait. * sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist * (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-cond11.c (run_test): Support testing pthread_cond_clockwait too by using a special magic CLOCK_USE_ATTR_CLOCK value to determine whether to call pthread_cond_timedwait or pthread_cond_clockwait. (do_test): Pass CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME. * ntpl/tst-cond26.c: New test for passing unsupported and * invalid clocks to pthread_cond_clockwait. * nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using struct timespec and pthread_cond_clockwait. * manual/threads.texi: Document pthread_cond_clockwait. The * comment was provided by Carlos O'Donell. [1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add POSIX-proposed sem_clockwaitMike Crowe2019-07-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add: int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec *abstime) which behaves just like sem_timedwait, but measures abstime against the specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and sets errno == EINVAL if any other clock is specified. * nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add clockid parameters to indicate the clock which abstime should be measured against. * nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c (__new_sem_wait): Pass CLOCK_REALTIME as clockid to __new_sem_wait_slow. * nptl/sem_clockwait.c: New file to implement sem_clockwait based on sem_timedwait.c. * nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for sem_clockwait.c to match those used for sem_timedwait.c. * sysdeps/pthread/semaphore.h: Add sem_clockwait. * nptl/Versions (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-sem17.c: Add new test for passing invalid clock to sem_clockwait. * nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait tests to also test sem_clockwait. * manual/threads.texi: Document sem_clockwait. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Remove vfork IFUNC-based forwarder from libpthread [BZ #20188]Florian Weimer2019-07-022-50/+0
| | | | | | | | | | | | | | | | | | | | | With commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"), the dynamic linker will find the definition of vfork in libc and binds a vfork reference to that symbol, even if the soname in the version reference says that the symbol should be located in libpthread. As a result, the forwarder (whether it's IFUNC-based or a duplicate of the libc implementation) is no longer necessary. On older architectures, a placeholder symbol is required, to make sure that the GLIBC_2.1.2 symbol version does not go away, or is turned in to a weak symbol definition by the link editor. (The symbol version needs to preserved so that the symbol coverage check in elf/dl-version.c does not fail for old binaries.) mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols, the placeholder symbol is not needed there.
* Linux: Add getdents64 system callFlorian Weimer2019-06-071-0/+1
| | | | | | | | | | | No 32-bit system call wrapper is added because the interface is problematic because it cannot deal with 64-bit inode numbers and 64-bit directory hashes. A future commit will deprecate the undocumented getdirentries and getdirentries64 functions. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update kernel-features.h files for Linux 5.1.Joseph Myers2019-05-161-2/+4
| | | | | | | | | | | | | | | | | | | | Linux 5.1 adds missing syscalls to the syscall table for many Linux kernel architectures. This patch updates the kernel-features.h headers accordingly. __ASSUME_DIRECT_SYSVIPC_SYSCALLS is not updated because of the differences between new and old syscalls described in <https://sourceware.org/ml/libc-alpha/2019-05/msg00235.html>. The statfs64 structure used by alpha matches what the new kernel syscalls use. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/alpha/kernel-features.h (__ASSUME_STATFS64): Only undefine if [__LINUX_KERNEL_VERSION < 0x050100]. * sysdeps/unix/sysv/linux/ia64/kernel-features.h (__ASSUME_STATX): Likewise. * sysdeps/unix/sysv/linux/sh/kernel-features.h (__ASSUME_STATX): Likewise.
* Linux: Add the tgkill functionFlorian Weimer2019-05-141-0/+1
| | | | | | | | | The tgkill function is sometimes used in crash handlers. <bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h> (which was added for the gettid system call wrapper). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* misc: Add twalk_r functionFlorian Weimer2019-05-021-0/+1
| | | | | | | | | The twalk function is very difficult to use in a multi-threaded program because there is no way to pass external state to the iterator function. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Remove __get_clockfreqAdhemerval Zanella2019-03-221-87/+0
| | | | | | | | | | | | | | | | | | | With clock_getres, clock_gettime, and clock_settime refactor to remove the generic CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID support through hp-timing, there is no usage of internal __get_clockfreq. This patch removes both generic and Linux implementation.. Checked with a build against aarch64-linux-gnu, i686-linux-gnu, ia64-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu-power4. * include/libc-internal.h (__get_clockfreq): Remove prototype. * rt/Makefile (clock-routines): Remove get_clockfreq. * rt/get_clockfreq.c: Remove file. * sysdeps/unix/sysv/linux/i386/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/ia64/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Move code to ... * sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c: ... here.
* linux: Assume clock_getres CLOCK_{PROCESS,THREAD}_CPUTIME_IDAdhemerval Zanella2019-03-222-81/+0
| | | | | | | | | | | | | | | | | | | | | | | | | The Linux 3.2 clock_getres kernel code (kernel/posix-cpu-timers.c) issued for clock_getres CLOCK_PROCESS_CPUTIME_ID (process_cpu_clock_getres) and CLOCK_THREAD_CPUTIME_ID (thread_cpu_clock_getres) call posix_cpu_clock_getres. And it fails on check_clock only if an invalid clock is used (not the case) or if we pass an invalid the pid/tid in 29 msb of clock_id (not the case either). This patch assumes that clock_getres syscall always support CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID, so there is no need to fallback to hp-timing support for _SC_MONOTONIC_CLOCK neither to issue the syscall to certify the clock_id is supported bt the kernel. This allows simplify the sysconf support to always use the syscall. it also removes ia64 itc drift check and assume kernel handles it correctly. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. * sysdeps/unix/sysv/linux/ia64/has_cpuclock.c: Remove file. * sysdeps/unix/sysv/linux/ia64/sysconf.c: Likewise. * sysdeps/unix/sysv/linux/sysconf.c (has_cpuclock): Remove function. (__sysconf): Assume kernel support for _SC_MONOTONIC_CLOCK, _SC_CPUTIME, and _SC_THREAD_CPUTIME.
* Linux: Add gettid system call wrapper [BZ #6399]Florian Weimer2019-02-081-0/+1
| | | | | | | | | | This commit adds gettid to <unistd.h> on Linux, and not to the kernel-independent GNU API. gettid is now supportable on Linux because too many things assume a 1:1 mapping between libpthread threads and kernel threads. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-0158-58/+58
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* ia64: Remove kernel_sigaction.hAdhemerval Zanella2018-12-181-7/+0
| | | | | | | | | IA64 kernel_sigaction.h definition is the sama as the Linux generic one. Checked on ia64-linux-gnu. * sysdeps/unix/sysv/linux/ia64/kernel_sigaction.h: Remove file.
* Do not clobber r12 for ia64 syscalls.Joseph Myers2018-12-171-1/+1
| | | | | | | | | | | | | GCC mainline now gives errors for an asm that clobbers the stack pointer. According to <https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC previously ignored such a clobber; thus, this patch removes it from the clobbers for ia64 syscalls. Tested with build-many-glibcs.py for ia64-linux-gnu. * sysdeps/unix/sysv/linux/ia64/sysdep.h (ASM_CLOBBERS_6_COMMON): Do not clobber r12.
* Add getcpuH.J. Lu2018-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add #include <sched.h> int getcpu (unsigned int *cpu, unsigned int *node); to return currently used CPU and NUMA node. Tested on x86-64, x32 and i686 as well as with build-many-glibcs.py. * NEWS: Mention getcpu. * include/sched.h (__getcpu): New libc_hidden_proto. * manual/resource.texi: Document getcpu. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add getcpu. * sysdeps/unix/sysv/linux/Versions (GLIBC_2.29): Add getcpu. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add getcpu. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/bits/sched.h (getcpu): New prototype. * sysdeps/unix/sysv/linux/getcpu.c: New file. * sysdeps/unix/sysv/linux/tst-skeleton-affinity.c (test_size): Also check getcpu.
* posix: New function posix_spawn_file_actions_addfchdir_np [BZ #17405]Florian Weimer2018-12-071-0/+1
| | | | | | Along with posix_spawn_file_actions_addchdir, posix_spawn_file_actions_addfchdir is the subject of a change proposal for POSIX: <http://austingroupbugs.net/view.php?id=1208>
* posix: Use posix_spawn on systemAdhemerval Zanella2018-11-301-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses posix_spawn on system implementation. On Linux this has the advantage of much lower memory consumption (usually 32 Kb minimum for the mmap stack area). Although POSIX does not require, glibc system implementation aims to be thread and cancellation safe. The cancellation code is moved to generic implementation and enabled iff SIGCANCEL is defined (similar on how the cancellation handler is enabled on nptl-init.c). Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu. * sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Use __sigismember instead of sigismember. * sysdeps/posix/system.c [SIGCANCEL] (cancel_handler_args, cancel_handler): New definitions. (CLEANUP_HANDLER, CLEANUP_RESET): Likewise. (DO_LOCK, DO_UNLOCK, INIT_LOCK, ADD_REF, SUB_REF): Remove. (do_system): Use posix_spawn instead of fork and execl and remove reentracy code. * sysdeps/generic/not-errno.h (__kill_noerrno): New prototype. * sysdeps/unix/sysv/linux/not-errno.h (__kill_noerrno): Likewise. * sysdeps/unix/sysv/linux/ia64/system.c: Remove file. * sysdeps/unix/sysv/linux/s390/system.c: Likewise. * sysdeps/unix/sysv/linux/sparc/system.c: Likewise. * sysdeps/unix/sysv/linux/system.c: Likewise.
* Remove the error handling wrapper from powSzabolcs Nagy2018-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new pow symbol version that doesn't do SVID compatible error handling. The standard errno and fp exception based error handling is inline in the new code and does not have significant overhead. The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty w_pow.c and enabled for targets with their own pow implementation or ifunc dispatch on __ieee754_pow by including math/w_pow.c. The compatibility symbol version still uses the wrapper with SVID error handling around the new code. There is no new symbol version nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv). On targets where previously powl was an alias of pow, now it points to the compatibility symbol with the wrapper, because it still need the SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well. The __pow_finite symbol is now an alias of pow. Both __pow_finite and pow set errno and thus not const functions. The ia64 asm is changed so the compat and new symbol versions map to the same address. On x86_64 #include <math.h> was added before macro definitions that may affect that header. Tested with build-many-glibcs.py. * math/Versions (GLIBC_2.29): Add pow. * math/w_pow_compat.c (__pow_compat): Change to versioned compat symbol. * math/w_pow.c: New file. * sysdeps/i386/fpu/w_pow.c: New file. * sysdeps/ia64/fpu/e_pow.S: Add versioned symbols. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Rename to __pow and add necessary aliases. * sysdeps/ieee754/dbl-64/w_pow.c: New file. * sysdeps/m68k/m680x0/fpu/w_pow.c: New file. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Update. * sysdeps/unix/sysv/linux/arm/libm.abilist: Update. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update. * sysdeps/unix/sysv/linux/sh/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__ieee754_pow): Rename to __pow. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__ieee754_pow): Likewise. * sysdeps/x86_64/fpu/multiarch/e_pow.c (__ieee754_pow): Likewise. * sysdeps/x86_64/fpu/multiarch/w_pow.c: New file.
* Remove the error handling wrapper from log2Szabolcs Nagy2018-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new log2 symbol version that doesn't do SVID compatible error handling. The standard errno and fp exception based error handling is inline in the new code and does not have significant overhead. The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty w_log2.c and enabled for targets with their own log2 implementation by including math/w_log2.c. The compatibility symbol version still uses the wrapper with SVID error handling around the new code. There is no new symbol version nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv). On targets where previously log2l was an alias of log2, now it points to the compatibility symbol with the wrapper, because it still need the SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well. The __log2_finite symbol is now an alias of log2. Both __log2_finite and log2 set errno and thus not const functions. The ia64 asm is changed so the compat and new symbol versions map to the same address. Tested with build-many-glibcs.py. * math/Versions (GLIBC_2.29): Add log2. * math/w_log2_compat.c (__log2_compat): Change to versioned compat symbol. * math/w_log2.c: New file. * sysdeps/i386/fpu/w_log2.c: New file. * sysdeps/ia64/fpu/e_log2.S: Add versioned symbols. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Rename to __log2 and add necessary aliases. * sysdeps/ieee754/dbl-64/w_log2.c: New file. * sysdeps/m68k/m680x0/fpu/w_log2.c: New file. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Update. * sysdeps/unix/sysv/linux/arm/libm.abilist: Update. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update. * sysdeps/unix/sysv/linux/sh/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* Remove the error handling wrapper from logSzabolcs Nagy2018-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new log symbol version that doesn't do SVID compatible error handling. The standard errno and fp exception based error handling is inline in the new code and does not have significant overhead. The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty w_log.c and enabled for targets with their own log implementation by including math/w_log.c. The compatibility symbol version still uses the wrapper with SVID error handling around the new code. There is no new symbol version nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv). On targets where previously logl was an alias of log, now it points to the compatibility symbol with the wrapper, because it still need the SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well. The __log_finite symbol is now an alias of log. Both __log_finite and log set errno and thus not const functions. The ia64 asm is changed so the compat and new symbol versions map to the same address. On x86_64 #include <math.h> was added before macro definitions that may affect that header. Tested with build-many-glibcs.py. * math/Versions (GLIBC_2.29): Add log. * math/w_log_compat.c (__log_compat): Change to versioned compat symbol. * math/w_log.c: New file. * sysdeps/i386/fpu/w_log.c: New file. * sysdeps/ia64/fpu/e_log.S: Update. * sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Rename to __log and add necessary aliases. * sysdeps/ieee754/dbl-64/w_log.c: New file. * sysdeps/m68k/m680x0/fpu/w_log.c: New file. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Update. * sysdeps/unix/sysv/linux/arm/libm.abilist: Update. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update. * sysdeps/unix/sysv/linux/sh/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update. * sysdeps/x86_64/fpu/multiarch/e_log-avx.c (__ieee754_log): Rename to __log. * sysdeps/x86_64/fpu/multiarch/e_log-fma.c (__ieee754_log): Likewise. * sysdeps/x86_64/fpu/multiarch/e_log-fma4.c (__ieee754_log): Likewise. * sysdeps/x86_64/fpu/multiarch/e_log.c (__ieee754_log): Likewise. * sysdeps/x86_64/fpu/multiarch/w_log.c: New file.
* Remove the error handling wrapper from exp and exp2Szabolcs Nagy2018-11-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new exp and exp2 symbol version that don't do SVID compatible error handling. The standard errno and fp exception based error handling is inline in the new code and does not have significant overhead. The double precision wrappers are disabled for sysdeps/ieee754/dbl-64 by using empty w_exp.c and w_exp2.c files, the math/w_exp.c and math/w_exp2.c files use the wrapper template and can be included by targets that have their own exp and exp2 implementations or use ifunc on the glibc internal __ieee754_exp symbol. The compatibility symbol versions still use the wrapper with SVID error handling around the new code. There is no new symbol version nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv). On targets where previously expl and exp2l were aliases of exp and exp2, now they point to the compatibility symbols with the wrapper, because they still need the SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well. The _finite symbols are now aliases of the standard symbols (they have no performance advantage anymore). Both the standard symbols and _finite symbols set errno and thus not const functions. The ia64 asm is changed so the compat and new symbol versions map to the same address. On x86_64 #include <math.h> was added before macro definitions that may affect that header (the new macro name is __exp instead of __ieee754_exp which breaks some math.h macros). Tested with build-many-glibcs.py. * math/Versions (GLIBC_2.29): Add exp and exp2. * math/w_exp2_compat.c (__exp2_compat): Change to versioned compat symbol, handle NO_LONG_DOUBLE and LONG_DOUBLE_COMPAT explicitly. * math/w_exp_compat.c (__exp_compat): Likewise. * math/w_exp.c: New file. * math/w_exp2.c: New file. * sysdeps/i386/fpu/w_exp.c: New file. * sysdeps/i386/fpu/w_exp2.c: New file. * sysdeps/ia64/fpu/e_exp.S: Add versioned symbols. * sysdeps/ia64/fpu/e_exp2.S: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Rename to __exp and add necessary aliases. * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Rename to __exp2 and add necessary aliases. * sysdeps/ieee754/dbl-64/w_exp.c: New file. * sysdeps/ieee754/dbl-64/w_exp2.c: New file. * sysdeps/m68k/m680x0/fpu/w_exp.c: New file. * sysdeps/m68k/m680x0/fpu/w_exp2.c: New file. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Update. * sysdeps/unix/sysv/linux/arm/libm.abilist: Update. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update. * sysdeps/unix/sysv/linux/sh/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__exp1): Remove. (__ieee754_exp): Rename to __exp. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__exp1): Remove. (__ieee754_exp): Rename to __exp. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__exp1): Remove. (__ieee754_exp): Rename to __exp. * sysdeps/x86_64/fpu/multiarch/e_exp.c (__ieee754_exp): Rename to __exp. * sysdeps/x86_64/fpu/multiarch/w_exp.c: New file.
* posix: New function posix_spawn_file_actions_addchdir_np [BZ #17405]Florian Weimer2018-11-061-0/+1
|
* Move SHMLBA to its own header.Joseph Myers2018-10-172-95/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One difference between bits/shm.h headers for architectures using the Linux kernel is the definition of SHMLBA. This was noted in <https://sourceware.org/ml/libc-alpha/2018-09/msg00175.html> as a reason why even a new architecture (C-SKY) might need its own bits/shm.h; thus, splitting it out of bits/shm.h can allow less duplication of headers for new architectures. This patch moves that definition to its own header, bits/shmlba.h, to allow more sharing of headers between architectures. That move allows the arm, ia64 and sh variants of bits/shm.h to be removed, as they had no other significant differences from the generic bits/shm.h; powerpc and x86 have their own bits/shm.h but do not need to get their own bits/shmlba.h because they use the same SHMLBA as the generic header. Other architectures with their own bits/shm.h get their own bits/shmlba.h without being able to remove their own bits/shm.h until the generic one has been adapted to be able to handle more architectures (where, in addition to the differences seen for bits/msq.h and bits/sem.h, the position of shm_segsz in struct shmid_ds also depends on the architecture). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shmlba.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getshmlba): Remove function declaration. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/arm/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/ia64/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/bits/shmlba.h: New file. * sysdeps/unix/sysv/linux/arm/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shmlba.h: Likewise.
* Use common bits/sem.h for more architectures.Joseph Myers2018-10-101-86/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/sem.h has padding after time fields in struct semid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/sem.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/sem.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. This is essentially the same change for bits/sem.h as the bits/msq.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/wordsize.h>. (struct semid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/sem.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h: Likewise.
* Use common bits/msq.h for more architectures.Joseph Myers2018-10-101-76/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/msq.h has padding after time fields in struct msqid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/msq.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/msq.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/wordsize.h>. (struct msqid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/msq.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h: Likewise.
* Share MAP_* flags between more architectures.Joseph Myers2018-09-261-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing bits/mman.h unification between architectures using the Linux kernel, this patch arranges for the common set of MAP_* flags to be used by two more architectures. That common set is moved to bits/mman-map-flags-generic.h, which is included by bits/mman.h, to allow architectures to use that common set even if they also have architecture-specific additions to it. As well as the generic bits/mman.h, the versions for x86 and ia64 are also then made to include bits/mman-map-flags-generic.h, so while they still need architecture-specific bits/mman.h (for MAP_32BIT and MAP_GROWSUP respectively), they do not need to duplicate the generic flag definitions in there. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-map-flags-generic.h: New file. Most contents moved from .... * sysdeps/unix/sysv/linux/bits/mman.h: ... here. Move contents to and include <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/mman-map-flags-generic.h. * sysdeps/unix/sysv/linux/ia64/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_GROWSUP): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/x86/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_32BIT): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>.
* Unify some sys/procfs.h headers.Joseph Myers2018-09-252-130/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per recent discussions, this patch unifies some of the sys/procfs.h headers for architectures using the Linux kernel, producing a generic version that can hopefully be used by all new architectures as well. The new generic version is based on the AArch64 one. The register definitions, the only part that generally needs to vary by architecture, go in a new bits/procfs.h header (which each architecture using the generic version needs to provide); that header also has any #includes that were in the architecture-specific sys/procfs.h, where those includes went beyond the generic set. The generic version is used for eight architectures where the generic definitions were the same as the architecture-specific ones. (Some of those architectures had #if 0 fields, now removed; some defined types or fields using different type names which were typedefs for the same underlying types.) Six of the remaining architectures with their own sys/procfs.h use unsigned short for pr_uid / pr_gid in some cases; moving those to the generic header will require a bits/ header to define a typedef for the type of those fields. In the case of alpha, the generic sys/procfs.h uses elf_gregset_t (= unsigned long int[33]) to define prgregset_t and elf_fpregset_t (= double[32]) to define prfpregset_t, but the alpha version uses gregset_t (= long int[33]) and fpregset_t (= long int[32]), so avoiding unnecessarily changing the underlying types (and thus C++ name mangling) again means a bits/ header will need to be able to define a different choice for those typedefs. bits/procfs.h is included outside the __BEGIN_DECLS / __END_DECLS pair (whereas the definitions it contains were previously inside that pair in various sys/procfs.h headers), because it sometimes includes other headers and putting those other #includes inside that pair seems risky. Because none of the declarations in bits/procfs.h are of functions or variables or involve function types, I don't think it makes any difference whether they are inside or outside an extern "C" context. Tested with build-many-glibcs.py (again, that does not provide much validation for the correctness of this patch). * sysdeps/unix/sysv/linux/sys/procfs.h: Replace with file based on AArch64 version. Include <bits/procfs.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs.h. * sysdeps/unix/sysv/linux/bits/procfs.h: New file. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/hppa/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sys/procfs.h: Likewise.
* Update siginfo constants from Linux kernel (bug 21286).Joseph Myers2018-09-171-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of Linux 4.17, siginfo headers in the Linux kernel have been largely unified across architectures (so various constants are defined with common values in include/uapi/asm-generic/siginfo.h even if not all architectures can generate those particular constants). This patch makes glibc reflect that unification and the current set of constants in that header as of Linux 4.18. Various constants are added to bits/siginfo-consts.h (under the same feature test macro conditions as the other constants with the same prefix), and removed from the ia64 bits/siginfo-consts-arch.h where they were previously there - this is not limited to constants added by the unification. Nothing is done about macros that are defined in include/uapi/asm-generic/siginfo.h with names with leading '__' (some of those are ia64-specific ones that remain in the ia64 bits/siginfo-consts-arch.h without the leading '__' there). A consequence of these changes is that TRAP_HWBKPT becomes available on AArch64 and all other architectures as requested in bug 21286. Tested for x86_64; tested with build-many-glibcs.py for ia64. [BZ #21286] * sysdeps/unix/sysv/linux/bits/siginfo-consts.h (SI_DETHREAD): New constant. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (ILL_BADIADDR): Likewise. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (FPE_FLTUNK): Likewise. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (FPE_CONDTRAP): Likewise. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (SEGV_ACCADI): Likewise. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (SEGV_ADIDERR): Likewise. [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8] (SEGV_ADIPERR): Likewise. [__USE_XOPEN_EXTENDED] (TRAP_BRANCH): Likewise. [__USE_XOPEN_EXTENDED] (TRAP_HWBKPT): Likewise. [__USE_XOPEN_EXTENDED] (TRAP_UNK): Likweise. * sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h (ILL_BADIADDR): Remove constant. (TRAP_BRANCH): Likewise. (TRAP_HWBKPT): Likewise.
* ia64: Work around incorrect type of IA64 uc_sigmaskH.J. Lu2018-07-251-0/+26
| | | | | | | | Work around: https://sourceware.org/bugzilla/show_bug.cgi?id=21634 * sysdeps/unix/sysv/linux/ia64/tst-setcontext4.c: New file.
* nptl: Add abilist symbols for C11 threadsAdhemerval Zanella2018-07-242-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the required abilist symbols for C11 thread support. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (thrd_current, thrd_equal, thrd_sleep, thrd_yield): Add C11 thread symbols. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist [[GLIBC_2.28] (call_once, cnd_broadcast, cnd_destroy, cnd_init, cnd_signal, cnd_timedwait, cnd_wait, mtx_destroy, mtx_init, mtx_lock, mtx_timedlock, mtx_trylock, mtx_unlokc, thrd_create, thrd_detach, thrd_exit, thrd_join, tss_create, tss_delete, tss_get, tss_set): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist: Likewise. ikewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist: * sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist: Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-06 22:05:55 +0000