about summary refs log tree commit diff
path: root/sysdeps/s390
Commit message (Collapse)AuthorAgeFilesLines
...
* S390: Use DT_JUMPREL in prelink undo code.Stefan Liebler2016-07-063-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On s390, the current prelink undo code in elf_machine_lazy_rel() has the requirement, that the plt stubs use the first got slots after the 3 reserved ones. In case of undoing prelink, the plt got slots are reset to the correct addresses whithin the corresponding plt-stub. Therefore the address is calculated by the address of the first plt-stub-address which was written by prelink (see l->l_mach.plt) to got[1] and index of current relocation multiplied with 32 (=size of one plt slot). The index was calculated with &current-got-slot - &got[3]. This patch removes the requirement, that the plt-got-slots are starting at got[3]. The index is now calculated with &current-reloc - &reloc[0]. The first struct Elf64_Rela is stored at DT_JMPREL. This patch is needed to prepare for partial relro support. Ulrich Weigand suggested this approach to use DT_JMPREL - Thanks. ChangeLog: * sysdeps/s390/linkmap.h (struct link_map_machine): Remove member gotplt and add member jmprel. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_runtime_setup): Setup member jmprel with DT_JMPREL instead of gotplt with &got[3]. (elf_machine_lazy_rel): Calculate address with reloc and jmprel. * sysdeps/s390/s390-64/dl-machine.h: Likewise.
* elf: Consolidate machine-agnostic DTV definitions in <dl-dtv.h>Florian Weimer2016-06-202-16/+1
| | | | | Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were repeated for all architectures using DTVs.
* S390: Fix utf32 to utf16 handling of low surrogates (disable cu42).Stefan Liebler2016-05-251-93/+62
| | | | | | | | | | | | | | | | | According to the latest Unicode standard, a conversion from/to UTF-xx has to report an error if the character value is in range of an utf16 surrogate (0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html. Thus the cu42 instruction, which converts from utf32 to utf16, has to be disabled because it does not report an error in case of a value in range of a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c, vector variant is adjusted to handle the value in range of an utf16 low surrogate correctly. ChangeLog: * sysdeps/s390/utf16-utf32-z9.c: Disable cu42 instruction and report an error in case of a value in range of an utf16 low surrogate.
* S390: Fix utf32 to utf8 handling of low surrogates (disable cu41).Stefan Liebler2016-05-251-73/+115
| | | | | | | | | | | | | | | | | According to the latest Unicode standard, a conversion from/to UTF-xx has to report an error if the character value is in range of an utf16 surrogate (0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html. Thus the cu41 instruction, which converts from utf32 to utf8, has to be disabled because it does not report an error in case of a value in range of a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c, vector variant is adjusted to handle the value in range of an utf16 low surrogate correctly. ChangeLog: * sysdeps/s390/utf8-utf32-z9.c: Disable cu41 instruction and report an error in case of a value in range of an utf16 low surrogate.
* S390: Use s390-64 specific ionv-modules on s390-32, too.Stefan Liebler2016-05-256-46/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the existing s390 64bit specific iconv modules in order to use them on s390 31bit, too. Thus the parts for subdirectory iconvdata in sysdeps/s390/s390-64/Makefile were moved to sysdeps/s390/Makefile so that they apply on 31bit, too. All those modules are moved from sysdeps/s390/s390-64 directory to sysdeps/s390. The iso-8859-1 to/from cp037 module was adjusted, to use brct (branch relative on count) instruction on 31bit s390 instead of brctg, because the brctg is a zarch instruction and is not available on a 31bit kernel. The utf modules are using zarch instructions, thus the directive machinemode zarch_nohighgprs was added to the inline assemblies to omit the high-gprs flag in the shared libraries. Otherwise they can't be loaded on a 31bit kernel. The ifunc resolvers were adjusted in order to call the etf3eh or vector variants only if zarch instructions are available (64bit kernel in 31bit compat-mode). Furthermore some variable types were changed. E.g. unsigned long long would be a register pair on s390 31bit, but we want only one single register. For variables of type size_t the register contents have to be enlarged from a 32bit to a 64bit value on 31bit, because the inline assemblies uses 64bit values in such cases. ChangeLog: * sysdeps/s390/s390-64/Makefile (iconvdata-subdirectory): Move to ... * sysdeps/s390/Makefile: ... here. * sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Move to ... * sysdeps/s390/iso-8859-1_cp037_z900.c: ... here. (BRANCH_ON_COUNT): New define. (TR_LOOP): Use BRANCH_ON_COUNT instead of brctg. * sysdeps/s390/s390-64/utf16-utf32-z9.c: Move to ... * sysdeps/s390/utf16-utf32-z9.c: ... here and adjust to run on s390-32, too. * sysdeps/s390/s390-64/utf8-utf16-z9.c: Move to ... * sysdeps/s390/utf8-utf16-z9.c: ... here and adjust to run on s390-32, too. * sysdeps/s390/s390-64/utf8-utf32-z9.c: Move to ... * sysdeps/s390/utf8-utf32-z9.c: ... here and adjust to run on s390-32, too.
* S390: Optimize utf16-utf32 module.Stefan Liebler2016-05-251-92/+379
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the s390 specific module to convert between utf16 and utf32. Now ifunc is used to choose either the c or etf3eh (with convert utf instruction) variants at runtime. Furthermore a new vector variant for z13 is introduced which will be build and chosen if vector support is available at build / runtime. In case of converting utf 32 to utf16, the vector variant optimizes input of 2byte utf16 characters. The convert utf instruction is used if an utf16 surrogate is found. For the other direction utf16 to utf32, the cu24 instruction can't be re- enabled, because it does not report an error, if the input-stream consists of a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too. Thus there is only the c or the new vector variant, which can handle utf16 surrogate characters. This patch also fixes some whitespace errors. Furthermore, the etf3eh variant is handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and always stopped at an error. ChangeLog: * sysdeps/s390/s390-64/utf16-utf32-z9.c: Use ifunc to select c, etf3eh or new vector loop-variant.
* S390: Optimize utf8-utf16 module.Stefan Liebler2016-05-251-106/+441
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the s390 specific module to convert between utf8 and utf16. Now ifunc is used to choose either the c or etf3eh (with convert utf instruction) variants at runtime. Furthermore a new vector variant for z13 is introduced which will be build and chosen if vector support is available at build / runtime. In case of converting utf 8 to utf16, the vector variant optimizes input of 1byte utf8 characters. The convert utf instruction is used if a multibyte utf8 character is found. For the other direction utf16 to utf8, the cu21 instruction can't be re-enabled, because it does not report an error, if the input-stream consists of a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too. Thus there is only the c or the new vector variant, which can handle 1..4 byte utf8 characters. The c variant from utf16 to utf8 has beed fixed. If a high surrogate was at the end of the input-buffer, then errno was set to EINVAL and the input-pointer pointed just after the high surrogate. Now it points to the beginning of the high surrogate. This patch also fixes some whitespace errors. The c variant from utf8 to utf16 is now checking that tail-bytes starts with 0b10... and the value is not in range of an utf16 surrogate. Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and always stopped at an error. ChangeLog: * sysdeps/s390/s390-64/utf8-utf16-z9.c: Use ifunc to select c, etf3eh or new vector loop-variant.
* S390: Optimize utf8-utf32 module.Stefan Liebler2016-05-251-184/+480
| | | | | | | | | | | | | | | | | | | | This patch reworks the s390 specific module to convert between utf8 and utf32. Now ifunc is used to choose either the c or etf3eh (with convert utf instruction) variants at runtime. Furthermore a new vector variant for z13 is introduced which will be build and chosen if vector support is available at build / runtime. The vector variants optimize input of 1byte utf8 characters. The convert utf instruction is used if a multibyte utf8 character is found. This patch also fixes some whitespace errors. The c variants are rejecting UTF-16 surrogates and values above 0x10ffff now. Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and always stopped at an error. ChangeLog: * sysdeps/s390/s390-64/utf8-utf32-z9.c: Use ifunc to select c, etf3eh or new vector loop-variant.
* S390: Optimize iso-8859-1 to ibm037 iconv-module.Stefan Liebler2016-05-251-37/+56
| | | | | | | | | | | This patch reworks the s390 specific module which used the z900 translate one to one instruction. Now the g5 translate instruction is used, because it outperforms the troo instruction. ChangeLog: * sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c (TROO_LOOP): Rename to TR_LOOP and usage of tr instead of troo instruction.
* S390: Optimize builtin iconv-modules.Stefan Liebler2016-05-252-0/+1270
| | | | | | | | | | | | | | | | | This patch introduces a s390 specific gconv_simple.c file which provides optimized versions for z13 with vector instructions, which will be chosen at runtime via ifunc. The optimized conversions can convert between internal and ascii, ucs4, ucs4le, ucs2, ucs2le. If the build-environment lacks vector support, then iconv/gconv_simple.c is used wihtout any change. Otherwise iconvdata/gconv_simple.c is used to create conversion loop routines without vector instructions as fallback, if vector instructions aren't available at runtime. ChangeLog: * sysdeps/s390/multiarch/gconv_simple.c: New File. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add gconv_simple.
* S390: Optimize 8bit-generic iconv modules.Stefan Liebler2016-05-254-0/+452
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a s390 specific 8bit-generic.c file which provides an optimized version for z13 with translate-/vector-instructions, which will be chosen at runtime via ifunc. If the build-environment lacks vector support, then iconvdata/8bit-generic.c is used wihtout any change. Otherwise iconvdata/8bit-generic.c is used to create conversion loop routines without vector instructions as fallback, if vector instructions aren't available at runtime. The vector routines can only be used with charsets where the maximum UCS4 value fits in 1 byte size. Then the hardware translate-instruction is used to translate between up to 256 generic characters and "1 byte UCS4" characters at once. The vector instructions are used to convert between the "1 byte UCS4" and UCS4. The gen-8bit.sh script in sysdeps/s390/multiarch generates the conversion table to_ucs1. Therefore in sysdeps/s390/multiarch/Makefile is added an override define generate-8bit-table, which is originally defined in iconvdata/Makefile. This version calls the gen-8bit.sh in iconvdata folder and the s390 one. ChangeLog: * sysdeps/s390/multiarch/8bit-generic.c: New File. * sysdeps/s390/multiarch/gen-8bit.sh: New File. * sysdeps/s390/multiarch/Makefile (generate-8bit-table): New override define. * sysdeps/s390/multiarch/iconv/skeleton.c: Likewise.
* S390: Configure check for vector support in gcc.Stefan Liebler2016-05-252-0/+53
| | | | | | | | | | | | | | | The S390 specific test checks if the gcc has support for vector registers by compiling an inline assembly which clobbers vector registers. On success the macro HAVE_S390_VX_GCC_SUPPORT is defined. This macro can be used to determine if e.g. clobbering vector registers is allowed or not. ChangeLog: * config.h.in (HAVE_S390_VX_GCC_SUPPORT): New macro undefine. * sysdeps/s390/configure.ac: Add test for S390 vector register support in gcc. * sysdeps/s390/configure: Regenerated.
* S390: Get rid of make warning: overriding recipe for target gconv-modules.Stefan Liebler2016-05-252-50/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a way to provide an architecture dependent gconv-modules file. Before this patch, the gconv-modules file was normally installed from src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the installation recipe (with a make warning) in order to install the gconv-module-s390 file from build-dir. The iconvdata/Makefile provides another recipe, which copies the gconv-modules file from src to build dir, which are used by the testcases. Thus the testcases does not use the currently build s390-modules. This patch uses build-dir/iconvdata/gconv-modules for installation, which is generated by concatenating src-dir/iconvdata/gconv-modules and the architecture specific one. The latter one can be specified by setting the variable sysdeps-gconv-modules in sysdeps/.../Makefile. The architecture specific gconv-modules file is emitted before the common one because these modules aren't used in all possible conversions. E.g. the converting from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so. This way, the s390-Makefile does not need to override the recipe for gconv-modules and no warning is emitted anymore. Since we no longer support empty objpfx the conditional test in iconvdata/Makefile is removed. ChangeLog: * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules): Install file from $(objpfx)gconv-modules. ($(objpfx)gconv-modules): Concatenate architecture specific file in variable sysdeps-gconv-modules and gconv-modules in src dir. * sysdeps/s390/gconv-modules: New file. * sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules): Deleted. ($(objpfx)gconv-modules-s390): Deleted. (sysdeps-gconv-modules): New variable.
* S390: Implement mempcpy with help of memcpy. [BZ #19765]Stefan Liebler2016-05-248-45/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There exist optimized memcpy functions on s390, but no optimized mempcpy. This patch adds mempcpy entry points in memcpy.S files, which use the memcpy implementation. Now mempcpy itself is also an IFUNC function as memcpy is and the variants are listed in ifunc-impl-list.c. The s390 string.h does not define _HAVE_STRING_ARCH_mempcpy. Instead mempcpy string/string.h inlines memcpy() + n. If n is constant and small enough, GCC emits instructions like mvi or mvc and avoids the function call to memcpy. If n is not constant, then memcpy is called and n is added afterwards. If _HAVE_STRING_ARCH_mempcpy would be defined, mempcpy would be called in every case. According to PR70140 "Inefficient expansion of __builtin_mempcpy" (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70140) GCC should handle a call to mempcpy in the same way as memcpy. Then either the mempcpy macro in string/string.h has to be removed or _HAVE_STRING_ARCH_mempcpy has to be defined for S390. ChangeLog: [BZ #19765] * sysdeps/s390/mempcpy.S: New File. * sysdeps/s390/multiarch/mempcpy.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add mempcpy. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add mempcpy variants. * sysdeps/s390/s390-32/memcpy.S: Add mempcpy entry point. (memcpy): Adjust to be usable from mempcpy entry point. (__memcpy_mvcle): Likewise. * sysdeps/s390/s390-64/memcpy.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add entry points ____mempcpy_z196, ____mempcpy_z10 and add __GI_ symbols for mempcpy. (__memcpy_z196): Adjust to be usable from mempcpy entry point. (__memcpy_z10): Likewise. * sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
* S390: Do not call memcpy, memcmp, memset within libc.so via ifunc-plt.Stefan Liebler2016-05-247-5/+21
| | | | | | | | | | | | | | | | | | | | | | | | On s390, the memcpy, memcmp, memset functions are IFUNC symbols, which are created with s390_libc_ifunc-macro. This macro creates a __GI_ symbol which is set to the ifunced symbol. Thus calls within libc.so to e.g. memcpy result in a call to *ABS*+0x954c0@plt stub and afterwards to the resolved memcpy-ifunc-variant. This patch sets the __GI_ symbol to the default-ifunc-variant to avoid the plt call. The __GI_ symbols are now created at the default variant of ifunced function. ChangeLog: * sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc): Remove __GI_ symbol. * sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Add __GI_memcmp symbol. * sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add __GI_memcpy symbol. * sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise. * sysdeps/s390/s390-32/multiarch/memset-s390.S: Add __GI_memset symbol. * sysdeps/s390/s390-64/multiarch/memset-s390x.S: Likewise.
* S390: Use 64bit instruction to check for copies of > 1MB with mvcle.Stefan Liebler2016-05-241-1/+1
| | | | | | | | | | | | | The __memcpy_default variant on s390 64bit calculates the number of 256byte blocks in a 64bit register and checks, if they exceed 1MB to jump to mvcle. Otherwise a mvc-loop is used. The compare-instruction only checks a 32bit value. This patch uses a 64bit compare. ChangeLog: * sysdeps/s390/s390-64/memcpy.S (memcpy): Use cghi instead of chi to compare 64bit value.
* S390: Use mvcle for copies > 1MB on 32bit with default memcpy variant.Stefan Liebler2016-05-241-1/+1
| | | | | | | | | | | | If more than 255 bytes should be copied, the algorithm jumps away. Before this patch, it jumps to the mvc-loop (.L_G5_12). Now it jumps first to the "> 1MB" check, which jumps away to __memcpy_mvcle. Otherwise, the mvc-loop (.L_G5_12) copies the bytes. ChangeLog: * sysdeps/s390/s390-32/memcpy.S (memcpy): Jump to 1MB check before executing mvc-loop.
* S390: Use fPIC to avoid R_390_GOT12 relocation in gcrt1.o.Stefan Liebler2016-05-112-4/+0
| | | | | | | | | | | | | | | | | | | if glibc is build with -march=z900 | -march=z990, the startup file gcrt1.o (used if you link with gcc -pg) contains R_390_GOT12 | R_390_GOT20 relocations. Thus, an entry in the GOT can be addressed relative to the GOT pointer with a 12 | 20 bit displacement value. The startup files should not contain R_390_GOT12, R_390_GOT20 relocations, but R_390_GOTENT ones. This patch removes the overrides of pic-ccflag and the default pic-ccflag = -fPIC in Makeconfig is used instead to get the R_390_GOTENT relocations in gcrt1.o. ChangeLog: * sysdeps/s390/s390-32/Makefile (pic-ccflag): Remove. * sysdeps/s390/s390-64/Makefile: Likewise.
* S390: Use ahi instead of aghi in 32bit _dl_runtime_resolve.Stefan Liebler2016-04-011-1/+1
| | | | | | | | | | | This patch uses ahi instead of aghi in 32bit _dl_runtime_resolve to adjust the stack pointer. This is no functional change, but a cosmetic one. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve): Use ahi instead of aghi to adjust stack pointer.
* S390: Extend structs La_s390_regs / La_s390_retval with vector-registers.Stefan Liebler2016-03-313-65/+124
| | | | | | | | | | | | | | | | | | | | | Starting with z13, vector registers can also occur as argument registers. Thus the passed input/output register structs for la_s390_[32|64]_gnu_plt[enter|exit] functions should reflect those new registers. This patch extends these structs La_s390_regs and La_s390_retval and adjusts _dl_runtime_profile() to handle those fields in case of running on a z13 machine. ChangeLog: * sysdeps/s390/bits/link.h: (La_s390_vr) New typedef. (La_s390_32_regs): Append vector register lr_v24-lr_v31. (La_s390_64_regs): Likewise. (La_s390_32_retval): Append vector register lrv_v24. (La_s390_64_retval): Likeweise. * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_profile): Handle extended structs La_s390_32_regs and La_s390_32_retval. * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_profile): Handle extended structs La_s390_64_regs and La_s390_64_retval.
* S390: Save and restore fprs/vrs while resolving symbols.Stefan Liebler2016-03-316-248/+496
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On s390, no fpr/vrs were saved while resolving a symbol via _dl_runtime_resolve/_dl_runtime_profile. According to the abi, the fpr-arguments are defined as call clobbered. In leaf-functions, gcc 4.9 and newer can use fprs for saving/restoring gprs instead of saving them to the stack. If gcc do this in one of the resolver-functions, then the floating point arguments of a library-function are invalid for the first library-function-call. Thus, this patch saves/restores the fprs around the resolving code. The same could occur for vector registers. Furthermore an ifunc-resolver could also clobber the vector/floating point argument registers. Thus this patch provides the further variants _dl_runtime_resolve_vx/ _dl_runtime_profile_vx, which are used if the kernel claims, that we run on a machine with vector registers. Furthermore, if _dl_runtime_profile calls _dl_call_pltexit, the pointers to inregs-/outregs-structs were setup invalid. Now they point to the correct location in the stack-frame. Before branching back to the caller, the return values are now restored instead of containing the return values of the _dl_call_pltexit() call. On s390-32, an endless loop occurs if _dl_call_pltexit() should be called. Now, this code-path branches to this function instead of just after the preceding basr-instruction. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.S: Include dl-trampoline.h twice to create a non-vector/vector version for _dl_runtime_resolve and _dl_runtime_profile. Move implementation to ... * sysdeps/s390/s390-32/dl-trampoline.h: ... here. (_dl_runtime_resolve) Save and restore fpr/vrs. (_dl_runtime_profile) Save and restore vrs and fix some issues if _dl_call_pltexit is called. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_runtime_setup): Choose the correct resolver function if running on a machine with vx. * sysdeps/s390/s390-64/dl-trampoline.S: Include dl-trampoline.h twice to create a non-vector/vector version for _dl_runtime_resolve and _dl_runtime_profile. Move implementation to ... * sysdeps/s390/s390-64/dl-trampoline.h: ... here. (_dl_runtime_resolve) Save and restore fpr/vrs. (_dl_runtime_profile) Save and restore vrs and fix some issues * sysdeps/s390/s390-64/dl-machine.h: (elf_machine_runtime_setup): Choose the correct resolver function if running on a machine with vx.
* Add _STRING_INLINE_unaligned and string_private.hH.J. Lu2016-02-182-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As discussed in https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html the setting of _STRING_ARCH_unaligned currently controls the external GLIBC ABI as well as selecting the use of unaligned accesses withing GLIBC. Since _STRING_ARCH_unaligned was recently changed for AArch64, this would potentially break the ABI in GLIBC 2.23, so split the uses and add _STRING_INLINE_unaligned to select the string ABI. This setting must be fixed for each target, while _STRING_ARCH_unaligned may be changed from release to release. _STRING_ARCH_unaligned is used unconditionally in glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and may change between glibc releases, it should be made private to glibc. _STRING_ARCH_unaligned should defined in the new string_private.h heade file which is included unconditionally from internal <string.h> for glibc build. [BZ #19462] * bits/string.h (_STRING_ARCH_unaligned): Renamed to ... (_STRING_INLINE_unaligned): This. * include/string.h: Include <string_private.h>. * string/bits/string2.h: Replace _STRING_ARCH_unaligned with _STRING_INLINE_unaligned. * sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed. (_STRING_INLINE_unaligned): New. * sysdeps/aarch64/string_private.h: New file. * sysdeps/generic/string_private.h: Likewise. * sysdeps/m68k/m680x0/m68020/string_private.h: Likewise. * sysdeps/s390/string_private.h: Likewise. * sysdeps/x86/string_private.h: Likewise. * sysdeps/m68k/m680x0/m68020/bits/string.h (_STRING_ARCH_unaligned): Renamed to ... (_STRING_INLINE_unaligned): This. * sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed to ... (_STRING_INLINE_unaligned): This. * sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed to ... (_STRING_INLINE_unaligned): This. * sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed to ... (_STRING_INLINE_unaligned): This.
* S390: Regenerate ULPsStefan Liebler2016-01-191-238/+268
| | | | | | | | | I've regenerated ulps from scratch for s390/s390x. All math testcases are passing afterwards. ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* S/390: Do not raise inexact exception in lrint/lround. [BZ #19486]Stefan Liebler2016-01-181-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I get some math test-failures on s390 for float/double/ldouble for various lrint/lround functions like: lrint (0x1p64): Exception "Inexact" set lrint (-0x1p64): Exception "Inexact" set lround (0x1p64): Exception "Inexact" set lround (-0x1p64): Exception "Inexact" set ... GCC emits "convert to fixed" instructions for casting floating point values to integer values. These instructions raise invalid and inexact exceptions if the floating point value exceeds the integer type ranges. This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in order to avoid a cast from floating point to integer type and raise the invalid exception with feraiseexcept. The ldbl-128 rint/round functions are now using the same logic. ChangeLog: [BZ #19486] * sysdeps/s390/fix-fp-int-convert-overflow.h: New File. * sysdeps/generic/fix-fp-int-convert-overflow.h (FIX_LDBL_LONG_CONVERT_OVERFLOW, FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define. * sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise. * sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Avoid conversions to long int where inexact exceptions could be raised. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Avoid conversions to long long int where inexact exceptions could be raised. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise.
* Add __private_ss to s390 struct tcbhead.Marcin Kościelnicki2016-01-141-0/+4
| | | | | | | | | | Preparation for gcc -fsplit-stack support (gcc bug #68191). The new field is basically identical to the one on x86. Its TCB offset needs to be constant, as it'll be hardcoded in gcc. ChangeLog: * sysdeps/s390/nptl/tls.h (struct tcbhead_t): Add __private_ss field.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-04244-244/+244
|
* S390: Use __asm__ instead of asm.Stefan Liebler2015-11-2034-348/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sysdeps/s390/fpu/bits/mathinline.h: Use __asm__ [__volatile__] instead of asm [volatile]. * sysdeps/s390/abort-instr.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/s390/bits/string.h: Likewise. * sysdeps/s390/dl-tls.h: Likewise. * sysdeps/s390/fpu/e_sqrt.c: Likewise. * sysdeps/s390/fpu/e_sqrtf.c: Likewise. * sysdeps/s390/fpu/e_sqrtl.c: Likewise. * sysdeps/s390/fpu/fesetround.c: Likewise. * sysdeps/s390/fpu/fpu_control.h: Likewise. * sysdeps/s390/fpu/s_fma.c: Likewise. * sysdeps/s390/fpu/s_fmaf.c: Likewise. * sysdeps/s390/memusage.h: Likewise. * sysdeps/s390/multiarch/ifunc-resolve.h: Likewise. * sysdeps/s390/nptl/pthread_spin_lock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise. * sysdeps/s390/nptl/tls.h: Likewise. * sysdeps/s390/s390-32/__longjmp.c: Likewise. * sysdeps/s390/s390-32/backtrace.c: Likewise. * sysdeps/s390/s390-32/dl-machine.h: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.c: Likewise. * sysdeps/s390/s390-32/stackguard-macros.h: Likewise. * sysdeps/s390/s390-32/tls-macros.h: Likewise. * sysdeps/s390/s390-64/__longjmp.c: Likewise. * sysdeps/s390/s390-64/backtrace.c: Likewise. * sysdeps/s390/s390-64/dl-machine.h: Likewise. * sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.c: Likewise. * sysdeps/s390/s390-64/stackguard-macros.h: Likewise. * sysdeps/s390/s390-64/tls-macros.h: Likewise. * sysdeps/s390/s390-64/utf16-utf32-z9.c: Likewise. * sysdeps/s390/s390-64/utf8-utf16-z9.c: Likewise. * sysdeps/s390/s390-64/utf8-utf32-z9.c: Likewise. * sysdeps/unix/sysv/linux/s390/brk.c: Likewise. * sysdeps/unix/sysv/linux/s390/elision-trylock.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/____longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/____longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/sysconf.c: Likewise.
* S390: Clean setjmp, longjmp, getcontext symbols.Stefan Liebler2015-11-093-24/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For each function setjmp, longjmp, getcontext, there exist a symbol <func> and a default/versioned symbol <func>@@GLIBC_2.x in the build obj-files. This is wrong because it should only exist an unversioned or a default-versioned symbol with the same name in an obj-file. Glibc can't be build with recent binutils. See the already fixed linker bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073. Nevertheless, this patch cleans this up. Furthermore the BSD entry points setjmp, _setjmp were marked as weak, but should be strong as on other architectures. (see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an older discussion with Andreas Schwab) Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S, too. But there is no change in the assembler code. ChangeLog: * sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp): Don't create weak aliases, because versioned symbols are created later. * sysdeps/s390/s390-32/setjmp.S (setjmp, _setjmp): Remove weak and rename to an unique name in SHARED case due to existing versioned symbols. * sysdeps/s390/s390-64/setjmp.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S (getcontext): Create weak alias only in non SHARED case. * sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
* Convert 231 sysdeps function definitions to prototype style.Joseph Myers2015-10-193-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mostly automatically-generated patch converts 231 sysdeps function definitions in glibc from old-style K&R to prototype-style. For __aio_sigqueue and __gai_sigqueue I had to add internal_function to the definitions as noted by Florian in <https://sourceware.org/ml/libc-alpha/2015-10/msg00595.html> to keep the functions compiling on x86 after conversion to prototype definitions. Otherwise, the patch is automatically generated with all the same exclusions and caveats as in <https://sourceware.org/ml/libc-alpha/2015-10/msg00594.html> except that it's a patch for sysdeps files. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Also tested for arm, mips64 and powerpc32 that installed stripped shared libraries are unchanged by the patch. * sysdeps/arm/backtrace.c (__backtrace): Convert to prototype-style function definition. * sysdeps/i386/backtrace.c (__backtrace): Likewise. * sysdeps/i386/ffs.c (__ffs): Likewise. * sysdeps/i386/i686/ffs.c (__ffs): Likewise. * sysdeps/ia64/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/ia64/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/m68k/ffs.c (__ffs): Likewise. * sysdeps/m68k/m680x0/fpu/e_acos.c (FUNC): Likewise. * sysdeps/m68k/m680x0/fpu/e_fmod.c (FUNC): Likewise. * sysdeps/mach/adjtime.c (__adjtime): Likewise. * sysdeps/mach/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/mach/hurd/_exit.c (_exit): Likewise. * sysdeps/mach/hurd/access.c (__access): Likewise. * sysdeps/mach/hurd/adjtime.c (__adjtime): Likewise. * sysdeps/mach/hurd/chdir.c (__chdir): Likewise. * sysdeps/mach/hurd/chmod.c (__chmod): Likewise. * sysdeps/mach/hurd/chown.c (__chown): Likewise. * sysdeps/mach/hurd/cthreads.c (cthread_keycreate): Likewise. (cthread_getspecific): Likewise. (cthread_setspecific): Likewise. (__libc_getspecific): Likewise. * sysdeps/mach/hurd/euidaccess.c (__euidaccess): Likewise. * sysdeps/mach/hurd/faccessat.c (faccessat): Likewise. * sysdeps/mach/hurd/fchdir.c (__fchdir): Likewise. * sysdeps/mach/hurd/fchmod.c (__fchmod): Likewise. * sysdeps/mach/hurd/fchmodat.c (fchmodat): Likewise. * sysdeps/mach/hurd/fchown.c (__fchown): Likewise. * sysdeps/mach/hurd/fchownat.c (fchownat): Likewise. * sysdeps/mach/hurd/flock.c (__flock): Likewise. * sysdeps/mach/hurd/fsync.c (fsync): Likewise. * sysdeps/mach/hurd/ftruncate.c (__ftruncate): Likewise. * sysdeps/mach/hurd/getgroups.c (__getgroups): Likewise. * sysdeps/mach/hurd/gethostname.c (__gethostname): Likewise. * sysdeps/mach/hurd/getitimer.c (__getitimer): Likewise. * sysdeps/mach/hurd/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/mach/hurd/getpgid.c (__getpgid): Likewise. * sysdeps/mach/hurd/getrusage.c (__getrusage): Likewise. * sysdeps/mach/hurd/getsockname.c (__getsockname): Likewise. * sysdeps/mach/hurd/group_member.c (__group_member): Likewise. * sysdeps/mach/hurd/isatty.c (__isatty): Likewise. * sysdeps/mach/hurd/lchown.c (__lchown): Likewise. * sysdeps/mach/hurd/link.c (__link): Likewise. * sysdeps/mach/hurd/linkat.c (linkat): Likewise. * sysdeps/mach/hurd/listen.c (__listen): Likewise. * sysdeps/mach/hurd/mkdir.c (__mkdir): Likewise. * sysdeps/mach/hurd/mkdirat.c (mkdirat): Likewise. * sysdeps/mach/hurd/openat.c (__openat): Likewise. * sysdeps/mach/hurd/poll.c (__poll): Likewise. * sysdeps/mach/hurd/readlink.c (__readlink): Likewise. * sysdeps/mach/hurd/readlinkat.c (readlinkat): Likewise. * sysdeps/mach/hurd/recv.c (__recv): Likewise. * sysdeps/mach/hurd/rename.c (rename): Likewise. * sysdeps/mach/hurd/renameat.c (renameat): Likewise. * sysdeps/mach/hurd/revoke.c (revoke): Likewise. * sysdeps/mach/hurd/rewinddir.c (__rewinddir): Likewise. * sysdeps/mach/hurd/rmdir.c (__rmdir): Likewise. * sysdeps/mach/hurd/seekdir.c (seekdir): Likewise. * sysdeps/mach/hurd/send.c (__send): Likewise. * sysdeps/mach/hurd/setdomain.c (setdomainname): Likewise. * sysdeps/mach/hurd/setegid.c (setegid): Likewise. * sysdeps/mach/hurd/seteuid.c (seteuid): Likewise. * sysdeps/mach/hurd/setgid.c (__setgid): Likewise. * sysdeps/mach/hurd/setgroups.c (setgroups): Likewise. * sysdeps/mach/hurd/sethostid.c (sethostid): Likewise. * sysdeps/mach/hurd/sethostname.c (sethostname): Likewise. * sysdeps/mach/hurd/setlogin.c (setlogin): Likewise. * sysdeps/mach/hurd/setpgid.c (__setpgid): Likewise. * sysdeps/mach/hurd/setregid.c (__setregid): Likewise. * sysdeps/mach/hurd/setreuid.c (__setreuid): Likewise. * sysdeps/mach/hurd/settimeofday.c (__settimeofday): Likewise. * sysdeps/mach/hurd/setuid.c (__setuid): Likewise. * sysdeps/mach/hurd/shutdown.c (shutdown): Likewise. * sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigpending.c (sigpending): Likewise. * sysdeps/mach/hurd/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/mach/hurd/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/mach/hurd/socket.c (__socket): Likewise. * sysdeps/mach/hurd/symlink.c (__symlink): Likewise. * sysdeps/mach/hurd/symlinkat.c (symlinkat): Likewise. * sysdeps/mach/hurd/telldir.c (telldir): Likewise. * sysdeps/mach/hurd/truncate.c (__truncate): Likewise. * sysdeps/mach/hurd/umask.c (__umask): Likewise. * sysdeps/mach/hurd/unlink.c (__unlink): Likewise. * sysdeps/mach/hurd/unlinkat.c (unlinkat): Likewise. * sysdeps/mips/mips64/__longjmp.c (__longjmp): Likewise. * sysdeps/posix/alarm.c (alarm): Likewise. * sysdeps/posix/cuserid.c (cuserid): Likewise. * sysdeps/posix/dirfd.c (dirfd): Likewise. * sysdeps/posix/dup.c (__dup): Likewise. * sysdeps/posix/dup2.c (__dup2): Likewise. * sysdeps/posix/euidaccess.c (euidaccess): Likewise. (main): Likewise. * sysdeps/posix/flock.c (__flock): Likewise. * sysdeps/posix/fpathconf.c (__fpathconf): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/posix/gethostname.c (__gethostname): Likewise. * sysdeps/posix/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/posix/isatty.c (__isatty): Likewise. * sysdeps/posix/killpg.c (killpg): Likewise. * sysdeps/posix/libc_fatal.c (__libc_fatal): Likewise. * sysdeps/posix/mkfifoat.c (mkfifoat): Likewise. * sysdeps/posix/raise.c (raise): Likewise. * sysdeps/posix/remove.c (remove): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/posix/rewinddir.c (__rewinddir): Likewise. * sysdeps/posix/seekdir.c (seekdir): Likewise. * sysdeps/posix/sigblock.c (__sigblock): Likewise. * sysdeps/posix/sigignore.c (sigignore): Likewise. * sysdeps/posix/sigintr.c (siginterrupt): Likewise. * sysdeps/posix/signal.c (__bsd_signal): Likewise. * sysdeps/posix/sigset.c (sigset): Likewise. * sysdeps/posix/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/posix/sysconf.c (__sysconf): Likewise. * sysdeps/posix/sysv_signal.c (__sysv_signal): Likewise. * sysdeps/posix/time.c (time): Likewise. * sysdeps/posix/ttyname.c (getttyname): Likewise. (ttyname): Likewise. * sysdeps/posix/ttyname_r.c (__ttyname_r): Likewise. * sysdeps/posix/utime.c (utime): Likewise. * sysdeps/powerpc/fpu/s_isnan.c (__isnan): Likewise. * sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/pthread/aio_error.c (aio_error): Likewise. * sysdeps/pthread/aio_read.c (aio_read): Likewise. * sysdeps/pthread/aio_read64.c (aio_read64): Likewise. * sysdeps/pthread/aio_write.c (aio_write): Likewise. * sysdeps/pthread/aio_write64.c (aio_write64): Likewise. * sysdeps/pthread/flockfile.c (__flockfile): Likewise. * sysdeps/pthread/ftrylockfile.c (__ftrylockfile): Likewise. * sysdeps/pthread/funlockfile.c (__funlockfile): Likewise. * sysdeps/pthread/timer_create.c (timer_create): Likewise. * sysdeps/pthread/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/pthread/timer_gettime.c (timer_gettime): Likewise. * sysdeps/s390/ffs.c (__ffs): Likewise. * sysdeps/s390/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/sh/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/sparc/nptl/pthread_barrier_destroy.c (pthread_barrier_destroy): Likewise. * sysdeps/sparc/nptl/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/e_sqrt.c (__ieee754_sqrt): Likewise. * sysdeps/sparc/sparc32/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/sem_init.c (__old_sem_init): Likewise. * sysdeps/tile/memcmp.c (memcmp_common_alignment): Likewise. (memcmp_not_common_alignment): Likewise. (MEMCMP): Likewise. * sysdeps/tile/wordcopy.c (_wordcopy_fwd_aligned): Likewise. (_wordcopy_fwd_dest_aligned): Likewise. (_wordcopy_bwd_aligned): Likewise. (_wordcopy_bwd_dest_aligned): Likewise. * sysdeps/unix/bsd/ftime.c (ftime): Likewise. * sysdeps/unix/bsd/gtty.c (gtty): Likewise. * sysdeps/unix/bsd/stty.c (stty): Likewise. * sysdeps/unix/bsd/tcflow.c (tcflow): Likewise. * sysdeps/unix/bsd/tcflush.c (tcflush): Likewise. * sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/bsd/tcgetpgrp.c (tcgetpgrp): Likewise. * sysdeps/unix/bsd/tcsendbrk.c (tcsendbreak): Likewise. * sysdeps/unix/bsd/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/bsd/tcsetpgrp.c (tcsetpgrp): Likewise. * sysdeps/unix/bsd/ualarm.c (ualarm): Likewise. * sysdeps/unix/bsd/wait3.c (__wait3): Likewise. * sysdeps/unix/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/unix/sockatmark.c (sockatmark): Likewise. * sysdeps/unix/stime.c (stime): Likewise. * sysdeps/unix/sysv/linux/_exit.c (_exit): Likewise. * sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/arm/sigaction.c (__libc_sigaction): Convert to prototype-style function definition. * sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise. * sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise. * sysdeps/unix/sysv/linux/fpathconf.c (__fpathconf): Likewise. * sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/gethostid.c (sethostid): Convert to prototype-style function definition * sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid): Likewise. (__getlogin_r): Likewise. * sysdeps/unix/sysv/linux/getpt.c (__posix_openpt): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_broadcast.c (__pthread_cond_broadcast): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_init.c (__pthread_cond_init): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_wait): Likewise. * sysdeps/unix/sysv/linux/i386/getmsg.c (getmsg): Likewise. * sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise. * sysdeps/unix/sysv/linux/ia64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/ia64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/ia64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c (__ftruncate64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c (truncate64): Likewise. * sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/pthread_getcpuclockid.c (pthread_getcpuclockid): Likewise. * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_sigmask.c (pthread_sigmask): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/semget.c (semget): Likewise. * sysdeps/unix/sysv/linux/semop.c (semop): Likewise. * sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise. * sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise. * sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise. * sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise. * sysdeps/unix/sysv/linux/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise. * sysdeps/unix/sysv/linux/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/speed.c (cfgetospeed): Likewise. (cfgetispeed): Likewise. (cfsetospeed): Likewise. (cfsetispeed): Likewise. * sysdeps/unix/sysv/linux/tcflow.c (tcflow): Likewise. * sysdeps/unix/sysv/linux/tcflush.c (tcflush): Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/sysv/linux/time.c (time): Likewise. * sysdeps/unix/sysv/linux/timer_create.c (timer_create): Likewise. * sysdeps/unix/sysv/linux/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/x86_64/backtrace.c (__backtrace): Likewise.
* Move bits/atomic.h to atomic-machine.h (bug 14912).Joseph Myers2015-09-111-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/atomic.h to atomic-machine.h to follow that convention. This is the only change in this series that needs to change the filename rather than simply removing a directory level (because both atomic.h and bits/atomic.h exist at present). Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * sysdeps/aarch64/bits/atomic.h: Move to ... * sysdeps/aarch64/atomic-machine.h: ...here. (_AARCH64_BITS_ATOMIC_H): Rename macro to _AARCH64_ATOMIC_MACHINE_H. * sysdeps/alpha/bits/atomic.h: Move to ... * sysdeps/alpha/atomic-machine.h: ...here. * sysdeps/arm/bits/atomic.h: Move to ... * sysdeps/arm/atomic-machine.h: ...here. Update comments. * bits/atomic.h: Move to ... * sysdeps/generic/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/i386/bits/atomic.h: Move to ... * sysdeps/i386/atomic-machine.h: ...here. * sysdeps/ia64/bits/atomic.h: Move to ... * sysdeps/ia64/atomic-machine.h: ...here. * sysdeps/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ... * sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here. * sysdeps/microblaze/bits/atomic.h: Move to ... * sysdeps/microblaze/atomic-machine.h: ...here. * sysdeps/mips/bits/atomic.h: Move to ... * sysdeps/mips/atomic-machine.h: ...here. (_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H. * sysdeps/powerpc/bits/atomic.h: Move to ... * sysdeps/powerpc/atomic-machine.h: ...here. Update comments. * sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update comments. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/s390/bits/atomic.h: Move to ... * sysdeps/s390/atomic-machine.h: ...here. * sysdeps/sparc/sparc32/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here. * sysdeps/sparc/sparc64/bits/atomic.h: Move to ... * sysdeps/sparc/sparc64/atomic-machine.h: ...here. * sysdeps/tile/bits/atomic.h: Move to ... * sysdeps/tile/atomic-machine.h: ...here. * sysdeps/tile/tilegx/bits/atomic.h: Move to ... * sysdeps/tile/tilegx/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/tile/tilepro/bits/atomic.h: Move to ... * sysdeps/tile/tilepro/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include <sysdeps/arm/atomic-machine.h> instead of <sysdeps/arm/bits/atomic.h>. * sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here. (_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here. * sysdeps/x86_64/bits/atomic.h: Move to ... * sysdeps/x86_64/atomic-machine.h: ...here. * include/atomic.h: Include <atomic-machine.h> instead of <bits/atomic.h>.
* Move bits/libc-lock.h and bits/libc-lockP.h out of bits/ (bug 14912).Joseph Myers2015-09-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/libc-lock.h to plain libc-lock.h and bits/libc-lockP.h to plain libc-lockP.h to follow that convention. Note that I don't know where libc-lockP.h comes from for Hurd (the Hurd libc-lock.h includes libc-lockP.h, but the only libc-lockP.h in the glibc source tree is for NPTL) - some unmerged patch? - but I updated the #include in the Hurd libc-lock.h anyway. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * bits/libc-lock.h: Move to ... * sysdeps/generic/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/mach/hurd/bits/libc-lock.h: Move to ... * sysdeps/mach/hurd/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. [_LIBC]: Include <libc-lockP.h> instead of <bits/libc-lockP.h>. * sysdeps/mach/bits/libc-lock.h: Move to ... * sysdeps/mach/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lock.h: Move to ... * sysdeps/nptl/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lockP.h: Move to ... * sysdeps/nptl/libc-lockP.h: ...here. (_BITS_LIBC_LOCKP_H): Rename macro to _LIBC_LOCKP_H. * crypt/crypt_util.c: Include <libc-lock.h> instead of <bits/libc-lock.h>. * dirent/scandir-tail.c: Likewise. * dlfcn/dlerror.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-iteratephdr.c: Likewise. * elf/dl-lookup.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-support.c: Likewise. * elf/dl-writev.h: Likewise. * elf/rtld.c: Likewise. * grp/fgetgrent.c: Likewise. * gshadow/fgetsgent.c: Likewise. * gshadow/sgetsgent.c: Likewise. * iconv/gconv_conf.c: Likewise. * iconv/gconv_db.c: Likewise. * iconv/gconv_dl.c: Likewise. * iconv/gconv_int.h: Likewise. * iconv/gconv_trans.c: Likewise. * include/link.h: Likewise. * inet/getnameinfo.c: Likewise. * inet/getnetgrent.c: Likewise. * inet/getnetgrent_r.c: Likewise. * intl/bindtextdom.c: Likewise. * intl/dcigettext.c: Likewise. * intl/finddomain.c: Likewise. * intl/gettextP.h: Likewise. * intl/loadmsgcat.c: Likewise. * intl/localealias.c: Likewise. * intl/textdomain.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * locale/duplocale.c: Likewise. * locale/freelocale.c: Likewise. * locale/newlocale.c: Likewise. * locale/setlocale.c: Likewise. * login/getutent_r.c: Likewise. * login/getutid_r.c: Likewise. * login/getutline_r.c: Likewise. * login/utmp-private.h: Likewise. * login/utmpname.c: Likewise. * malloc/mtrace.c: Likewise. * misc/efgcvt.c: Likewise. * misc/error.c: Likewise. * misc/fstab.c: Likewise. * misc/getpass.c: Likewise. * misc/mntent.c: Likewise. * misc/syslog.c: Likewise. * nis/nis_call.c: Likewise. * nis/nis_callback.c: Likewise. * nis/nss-default.c: Likewise. * nis/nss_compat/compat-grp.c: Likewise. * nis/nss_compat/compat-initgroups.c: Likewise. * nis/nss_compat/compat-pwd.c: Likewise. * nis/nss_compat/compat-spwd.c: Likewise. * nis/nss_nis/nis-alias.c: Likewise. * nis/nss_nis/nis-ethers.c: Likewise. * nis/nss_nis/nis-grp.c: Likewise. * nis/nss_nis/nis-hosts.c: Likewise. * nis/nss_nis/nis-network.c: Likewise. * nis/nss_nis/nis-proto.c: Likewise. * nis/nss_nis/nis-pwd.c: Likewise. * nis/nss_nis/nis-rpc.c: Likewise. * nis/nss_nis/nis-service.c: Likewise. * nis/nss_nis/nis-spwd.c: Likewise. * nis/nss_nisplus/nisplus-alias.c: Likewise. * nis/nss_nisplus/nisplus-ethers.c: Likewise. * nis/nss_nisplus/nisplus-grp.c: Likewise. * nis/nss_nisplus/nisplus-hosts.c: Likewise. * nis/nss_nisplus/nisplus-initgroups.c: Likewise. * nis/nss_nisplus/nisplus-network.c: Likewise. * nis/nss_nisplus/nisplus-proto.c: Likewise. * nis/nss_nisplus/nisplus-pwd.c: Likewise. * nis/nss_nisplus/nisplus-rpc.c: Likewise. * nis/nss_nisplus/nisplus-service.c: Likewise. * nis/nss_nisplus/nisplus-spwd.c: Likewise. * nis/ypclnt.c: Likewise. * nptl/libc_pthread_init.c: Likewise. * nss/getXXbyYY.c: Likewise. * nss/getXXent.c: Likewise. * nss/getXXent_r.c: Likewise. * nss/nss_db/db-XXX.c: Likewise. * nss/nss_db/db-netgrp.c: Likewise. * nss/nss_db/nss_db.h: Likewise. * nss/nss_files/files-XXX.c: Likewise. * nss/nss_files/files-alias.c: Likewise. * nss/nsswitch.c: Likewise. * posix/regex_internal.h: Likewise. * posix/wordexp.c: Likewise. * pwd/fgetpwent.c: Likewise. * resolv/res_hconf.c: Likewise. * resolv/res_libc.c: Likewise. * shadow/fgetspent.c: Likewise. * shadow/lckpwdf.c: Likewise. * shadow/sgetspent.c: Likewise. * socket/opensock.c: Likewise. * stdio-common/reg-modifier.c: Likewise. * stdio-common/reg-printf.c: Likewise. * stdio-common/reg-type.c: Likewise. * stdio-common/vfprintf.c: Likewise. * stdio-common/vfscanf.c: Likewise. * stdlib/abort.c: Likewise. * stdlib/cxa_atexit.c: Likewise. * stdlib/fmtmsg.c: Likewise. * stdlib/random.c: Likewise. * stdlib/setenv.c: Likewise. * string/strsignal.c: Likewise. * sunrpc/auth_none.c: Likewise. * sunrpc/bindrsvprt.c: Likewise. * sunrpc/create_xid.c: Likewise. * sunrpc/key_call.c: Likewise. * sunrpc/rpc_thread.c: Likewise. * sysdeps/arm/backtrace.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/generic/stdio-lock.h: Likewise. * sysdeps/generic/unwind-dw2-fde.c: Likewise. * sysdeps/i386/backtrace.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Likewise. * sysdeps/m68k/backtrace.c: Likewise. * sysdeps/mach/hurd/cthreads.c: Likewise. * sysdeps/mach/hurd/dirstream.h: Likewise. * sysdeps/mach/hurd/malloc-machine.h: Likewise. * sysdeps/nptl/malloc-machine.h: Likewise. * sysdeps/nptl/stdio-lock.h: Likewise. * sysdeps/posix/dirstream.h: Likewise. * sysdeps/posix/getaddrinfo.c: Likewise. * sysdeps/posix/system.c: Likewise. * sysdeps/pthread/aio_suspend.c: Likewise. * sysdeps/s390/s390-32/backtrace.c: Likewise. * sysdeps/s390/s390-64/backtrace.c: Likewise. * sysdeps/unix/sysv/linux/check_pf.c: Likewise. * sysdeps/unix/sysv/linux/if_index.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutent_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutid_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutline_r.c: Likewise. * sysdeps/unix/sysv/linux/shm-directory.c: Likewise. * sysdeps/unix/sysv/linux/system.c: Likewise. * sysdeps/x86_64/backtrace.c: Likewise. * time/alt_digit.c: Likewise. * time/era.c: Likewise. * time/tzset.c: Likewise. * wcsmbs/wcsmbsload.c: Likewise. * nptl/tst-initializers1.c (do_test): Refer to <libc-lock.h> instead of <bits/libc-lock.h> in comment.
* Rename bits/linkmap.h to linkmap.h (bug 14912).Joseph Myers2015-09-041-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/linkmap.h to plain linkmap.h to follow that convention. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * bits/linkmap.h: Move to ... * sysdeps/generic/linkmap.h: ...here. * sysdeps/aarch64/bits/linkmap.h: Move to ... * sysdeps/aarch64/linkmap.h: ...here. * sysdeps/arm/bits/linkmap.h: Move to ... * sysdeps/arm/linkmap.h: ...here. * sysdeps/hppa/bits/linkmap.h: Move to ... * sysdeps/hppa/linkmap.h: ...here. * sysdeps/ia64/bits/linkmap.h: Move to ... * sysdeps/ia64/linkmap.h: ...here. * sysdeps/mips/bits/linkmap.h: Move to ... * sysdeps/mips/linkmap.h: ...here. * sysdeps/s390/bits/linkmap.h: Move to ... * sysdeps/s390/linkmap.h: ...here. * sysdeps/sh/bits/linkmap.h: Move to ... * sysdeps/sh/linkmap.h: ...here. * sysdeps/x86/bits/linkmap.h: Move to ... * sysdeps/x86/linkmap.h: ...here. * include/link.h: Include <linkmap.h> instead of <bits/linkmap.h>.
* S390: Fix build error with gcc6 in utf8_utf16-z9.c.Stefan Liebler2015-08-261-0/+2
| | | | | | | | | | | | | | | | | | This patch fixes the build error with gcc6: array subscript is above array bounds [-Werror=array-bounds] While including loop.c to construct the SINGLE(LOOPFCT) method for converting from UTF-16 to UTF-8, the bytebuf array with length MAX_NEEDED_INPUT is used as inptr. MAX_NEEDED_INPUT defaults to MIN_NEEDED_INPUT if not defined before including loop.c. Thus bytebuf has a length of 2. This patch defines MAX_NEEDED_INPUT to MAX_NEEDED_TO, which is 4. ChangeLog: * sysdeps/s390/s390-64/utf8-utf16-z9.c (MAX_NEEDED_INPUT): New define. (MAX_NEEDED_OUTPUT): New define.
* S390: Optimize memrchr.Stefan Liebler2015-08-265-1/+217
| | | | | | | | | | | | | | | This patch provides optimized version of memrchr with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/memrchr-c.c: New File. * sysdeps/s390/multiarch/memrchr-vx.S: Likewise. * sysdeps/s390/multiarch/memrchr.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memrchr functions. * sysdeps/s390/multiarch/ifunc-impl-list-common.c (__libc_ifunc_impl_list_common): Add ifunc test for memrchr.
* S390: Optimize wmemcmp.Stefan Liebler2015-08-265-1/+207
| | | | | | | | | | | | | | | | | This patch provides optimized version of wmemcmp with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/wmemcmp-c.c: New File. * sysdeps/s390/multiarch/wmemcmp-vx.S: Likewise. * sysdeps/s390/multiarch/wmemcmp.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add wmemcmp functions. * sysdeps/s390/multiarch/ifunc-impl-list-common.c (__libc_ifunc_impl_list_common): Add ifunc test for wmemcmp. * benchtests/bench-wmemcmp.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wmemcmp.
* S390: Optimize wmemset.Stefan Liebler2015-08-265-1/+211
| | | | | | | | | | | | | | | | | | | | | | This patch provides optimized version of wmemset with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/wmemset-c.c: New File. * sysdeps/s390/multiarch/wmemset-vx.S: Likewise. * sysdeps/s390/multiarch/wmemset.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add wmemset functions. * sysdeps/s390/multiarch/ifunc-impl-list-common.c (__libc_ifunc_impl_list_common): Add ifunc test for wmemset. * wcsmbs/wmemset.c: Use WMEMSET if defined. * string/test-memset.c: Add wmemset support. * wcsmbs/test-wmemset.c: New File. * wcsmbs/Makefile (strop-tests): Add wmemset. * benchtests/bench-memset.c: Add wmemset support. * benchtests/bench-wmemset.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wmemset.
* S390: Optimize memccpy.Stefan Liebler2015-08-265-1/+213
| | | | | | | | | | | | | | | | This patch provides optimized versions of memccpy with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/memccpy-c.c: New File. * sysdeps/s390/multiarch/memccpy-vx.S: Likewise. * sysdeps/s390/multiarch/memccpy.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memccpy functions. * sysdeps/s390/multiarch/ifunc-impl-list-common.c (__libc_ifunc_impl_list_common): Add ifunc test for memccpy. * string/memccpy.c: Use MEMCCPY if defined.
* S390: Optimize memchr, rawmemchr and wmemchr.Stefan Liebler2015-08-2612-2/+620
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of memchr, rawmemchr and wmemchr with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/memchr-vx.S: New File. * sysdeps/s390/multiarch/memchr.c: Likewise. * sysdeps/s390/multiarch/rawmemchr-c.c: Likewise. * sysdeps/s390/multiarch/rawmemchr-vx.S: Likewise. * sysdeps/s390/multiarch/rawmemchr.c: Likewise. * sysdeps/s390/multiarch/wmemchr-c.c: Likewise. * sysdeps/s390/multiarch/wmemchr-vx.S: Likewise. * sysdeps/s390/multiarch/wmemchr.c: Likewise. * sysdeps/s390/s390-32/multiarch/memchr.c: Likewise. * sysdeps/s390/s390-64/multiarch/memchr.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memchr, wmemchr and rawmemchr functions. * sysdeps/s390/multiarch/ifunc-impl-list-common.c (__libc_ifunc_impl_list_common): Add ifunc test for memchr, rawmemchr and wmemchr. * wcsmbs/wmemchr.c: Use WMEMCHR if defined. * string/test-memchr.c: Add wmemchr support. * wcsmbs/test-wmemchr.c: New File. * wcsmbs/Makefile (strop-tests): Add wmemchr. * benchtests/bench-memchr.c: Add wmemchr support. * benchtests/bench-wmemchr.c: New File. * benchtests/Makefile (wcsmbs-bench): wmemchr.
* S390: Optimize strcspn and wcscspn.Stefan Liebler2015-08-268-2/+689
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strcspn and wcscspn with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strcspn-c.c: New File. * sysdeps/s390/multiarch/strcspn-vx.S: Likewise. * sysdeps/s390/multiarch/strcspn.c: Likewise. * sysdeps/s390/multiarch/wcscspn-c.c: Likewise. * sysdeps/s390/multiarch/wcscspn-vx.S: Likewise. * sysdeps/s390/multiarch/wcscspn.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strcspn and wcscspn functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strcspn, wcscspn. * wcsmbs/wcscspn.c: Use WCSCSPN if defined. * string/test-strcspn.c: Add wcscspn support. * wcsmbs/test-wcscspn.c: New File. * wcsmbs/Makefile (strop-tests): Add wcscspn. * benchtests/bench-strcspn.c: Add wcscspn support. * benchtests/bench-wcscspn.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcscspn.
* S390: Optimize strpbrk and wcspbrk.Stefan Liebler2015-08-268-2/+737
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strpbrk and wcspbrk with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strpbrk-c.c: New File. * sysdeps/s390/multiarch/strpbrk-vx.S: Likewise. * sysdeps/s390/multiarch/strpbrk.c: Likewise. * sysdeps/s390/multiarch/wcspbrk-c.c: Likewise. * sysdeps/s390/multiarch/wcspbrk-vx.S: Likewise. * sysdeps/s390/multiarch/wcspbrk.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strpbrk and wcspbrk functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strpbrk, wcspbrk. * wcsmbs/wcspbrk.c: Use WCSPBRK if defined. * string/test-strpbrk.c: Add wcspbrk support. * wcsmbs/test-wcspbrk.c: New File. * wcsmbs/Makefile (strop-tests): Add wcspbrk. * benchtests/bench-strpbrk.c: Add wcspbrk support. * benchtests/bench-wcspbrk.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcspbrk.
* S390: Optimize strspn and wcsspn.Stefan Liebler2015-08-268-2/+646
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strspn and wcsspn with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strspn-c.c: New File. * sysdeps/s390/multiarch/strspn-vx.S: Likewise. * sysdeps/s390/multiarch/strspn.c: Likewise. * sysdeps/s390/multiarch/wcsspn-c.c: Likewise. * sysdeps/s390/multiarch/wcsspn-vx.S: Likewise. * sysdeps/s390/multiarch/wcsspn.c: Likewise. * wcsmbs/wcsspn.c: Use WCSSPN if defined. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strspn and wcsspn functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strspn, wcsspn. * string/test-strspn.c: Add wcsspn support. * wcsmbs/test-wcsspn.c: New File. * wcsmbs/Makefile (strop-tests): Add wcsspn. * benchtests/bench-strspn.c: Add wcsspn support. * benchtests/bench-wcsspn.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcsspn.
* S390: Optimize strrchr and wcsrchr.Stefan Liebler2015-08-268-2/+486
| | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strrchr and wcsrchr with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strrchr-c.c: New File. * sysdeps/s390/multiarch/strrchr-vx.S: Likewise. * sysdeps/s390/multiarch/strrchr.c: Likewise. * sysdeps/s390/multiarch/wcsrchr-c.c: Likewise. * sysdeps/s390/multiarch/wcsrchr-vx.S: Likewise. * sysdeps/s390/multiarch/wcsrchr.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strrchr and wcsrchr functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strrchr, wcsrchr. * benchtests/bench-wcsrchr.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcsrchr.
* S390: Optimize strchrnul and wcschrnul.Stefan Liebler2015-08-268-2/+304
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strchrnul and wcschrnul with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strchrnul-c.c: New File. * sysdeps/s390/multiarch/strchrnul-vx.S: Likewise. * sysdeps/s390/multiarch/strchrnul.c: Likewise. * sysdeps/s390/multiarch/wcschrnul-c.c: Likewise. * sysdeps/s390/multiarch/wcschrnul-vx.S: Likewise. * sysdeps/s390/multiarch/wcschrnul.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strchrnul and wcschrnul functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strchrnul, wcschrnul. * wcsmbs/wcschrnul.c: Use WCSCHRNUL if defined. * string/test-strchr.c: Add wcschrnul support. * wcsmbs/test-wcschrnul.c: New File. * wcsmbs/Makefile (strop-tests): Add wcschrnul. * benchtests/bench-strchr.c: Add wcschrnul support. * benchtests/bench-wcschrnul.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcschrnul.
* S390: Optimize strchr and wcschr.Stefan Liebler2015-08-268-2/+333
| | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strchr and wcschr with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strchr-c.c: New File. * sysdeps/s390/multiarch/strchr-vx.S: Likewise. * sysdeps/s390/multiarch/strchr.c: Likewise. * sysdeps/s390/multiarch/wcschr-c.c: Likewise. * sysdeps/s390/multiarch/wcschr-vx.S: Likewise. * sysdeps/s390/multiarch/wcschr.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strchr and wcschr functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strchr, wcschr. * string/strchr.c (STRCHR): Define and use macro. * benchtests/bench-wcschr.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcschr.
* S390: Optimize strncmp and wcsncmp.Stefan Liebler2015-08-268-2/+431
| | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strncmp and wcsncmp with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strncmp-c.c: New File. * sysdeps/s390/multiarch/strncmp-vx.S: Likewise. * sysdeps/s390/multiarch/strncmp.c: Likewise. * sysdeps/s390/multiarch/wcsncmp-c.c: Likewise. * sysdeps/s390/multiarch/wcsncmp-vx.S: Likewise. * sysdeps/s390/multiarch/wcsncmp.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strncmp and wcsncmp functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strncmp, wcsncmp. * wcsmbs/wcsncmp.c (WCSNCMP): Define and use macro. * benchtests/bench-strncmp.c: Add wcsncmp support. * benchtests/bench-wcsncmp.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcsncmp.
* S390: Optimize strcmp and wcscmp.Stefan Liebler2015-08-2610-4/+384
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strcmp and wcscmp with the z13 vector instructions. The architecture specific string.h had a typo, which leads to ommiting the inline version in this file if __USE_STRING_INLINES is defined. Tested this inline version by tweaking test-strcmp.c. ChangeLog: * sysdeps/s390/multiarch/strcmp-vx.S: New File. * sysdeps/s390/multiarch/strcmp.c: Likewise. * sysdeps/s390/multiarch/wcscmp-c.c: Likewise. * sysdeps/s390/multiarch/wcscmp-vx.S: Likewise. * sysdeps/s390/multiarch/wcscmp.c: Likewise. * sysdeps/s390/s390-32/multiarch/strcmp.c: Likewise. * sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strcmp and wcscmp functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strcmp, wcscmp. * string/strcmp.c (STRCMP): Define and use macro. * benchtests/bench-wcscmp.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcscmp. * sysdeps/s390/bits/string.h: Fix typo: _HAVE_STRING_ARCH_strcmp instead of _HAVE_STRING_ARCH_memchr.
* S390: Optimize strncat wcsncat.Stefan Liebler2015-08-268-2/+613
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strncat and wcsncat with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strncat-c.c: New File. * sysdeps/s390/multiarch/strncat-vx.S: Likewise. * sysdeps/s390/multiarch/strncat.c: Likewise. * sysdeps/s390/multiarch/wcsncat-c.c: Likewise. * sysdeps/s390/multiarch/wcsncat-vx.S: Likewise. * sysdeps/s390/multiarch/wcsncat.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strncat and wcsncat functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strncat, wcsncat. * wcsmbs/wcsncat.c (WCSNCAT): Define and use macro. * string/test-strncat.c: Add wcsncat support. * wcsmbs/test-wcsncat.c: New File. * wcsmbs/Makefile (strop-tests): Add wcsncat. * benchtests/bench-strncat.c: Add wcsncat support. * benchtests/bench-wcsncat.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcsncat.
* S390: Optimize strcat and wcscat.Stefan Liebler2015-08-268-2/+451
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strcat and wcscat with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strcat-c.c: New File. * sysdeps/s390/multiarch/strcat-vx.S: Likewise. * sysdeps/s390/multiarch/strcat.c: Likewise. * sysdeps/s390/multiarch/wcscat-c.c: Likewise. * sysdeps/s390/multiarch/wcscat-vx.S: Likewise. * sysdeps/s390/multiarch/wcscat.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strcat and wcscat functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strcat, wcscat. * string/strcat.c (STRCAT): Define and use macro. * wcsmbs/wcscat.c: Use WCSCAT if defined. * string/test-strcat.c: Add wcscat support. * wcsmbs/test-wcscat.c: New File. * wcsmbs/Makefile (strop-tests): Add wcscat. * benchtests/bench-strcat.c: Add wcscat support. * benchtests/bench-wcscat.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcscat.
* S390: Optimize stpncpy and wcpncpy.Stefan Liebler2015-08-268-2/+538
| | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of stpncpy and wcpncpy with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/stpncpy-c.c: New File. * sysdeps/s390/multiarch/stpncpy-vx.S: Likewise. * sysdeps/s390/multiarch/stpncpy.c: Likewise. * sysdeps/s390/multiarch/wcpncpy-c.c: Likewise. * sysdeps/s390/multiarch/wcpncpy-vx.S: Likewise. * sysdeps/s390/multiarch/wcpncpy.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add stpncpy and wcpncpy functions. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for stpncpy, wcpncpy. * wcsmbs/wcpncpy.c: Use WCPNCPY if defined. * string/test-stpncpy.c: Add wcpncpy support. * wcsmbs/test-wcpncpy.c: New File. * wcsmbs/Makefile (strop-tests): Add wcpncpy. * benchtests/bench-stpncpy.c: Add wcpncpy support. * benchtests/bench-wcpncpy.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcpncpy.
* S390: Optimize strncpy and wcsncpy.Stefan Liebler2015-08-269-2/+556
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides optimized versions of strncpy and wcsncpy with the z13 vector instructions. ChangeLog: * sysdeps/s390/multiarch/strncpy-vx.S: New File. * sysdeps/s390/multiarch/strncpy.c: Likewise. * sysdeps/s390/multiarch/wcsncpy-c.c: Likewise. * sysdeps/s390/multiarch/wcsncpy-vx.S: Likewise. * sysdeps/s390/multiarch/wcsncpy.c: Likewise. * sysdeps/s390/s390-32/multiarch/strncpy.c: Likewise. * sysdeps/s390/s390-64/multiarch/strncpy.c: Likewise. * sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strncpy and wcsncpy functions. * wcsmbs/wcsncpy.c: Use WCSNCPY if defined. * sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add ifunc test for strncpy, wcsncpy. * string/test-strncpy.c: Add wcsncpy support. * wcsmbs/test-wcsncpy.c: New File. * wcsmbs/Makefile (strop-tests): Add wcsncpy. * benchtests/bench-strncpy.c: Add wcsncpy support. * benchtests/bench-wcsncpy.c: New File. * benchtests/Makefile (wcsmbs-bench): Add wcsncpy
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-03 07:53:06 +0000