about summary refs log tree commit diff
path: root/sysdeps/s390
Commit message (Collapse)AuthorAgeFilesLines
* Obsolete pow10 functions.Joseph Myers2017-09-011-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* S390: Add new s390 platform z14.Stefan Liebler2017-08-152-3/+3
| | | | | | | | | | The new IBM z14 is added to platform string array. The macro _DL_PLATFORMS_COUNT is incremented. ChangeLog: * sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add z14. * sysdeps/s390/dl-procinfo.h (_DL_PLATFORMS_COUNT): Increased.
* Require binutils 2.25 or later to build glibc.Joseph Myers2017-06-282-71/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch implements a requirement of binutils >= 2.25 (up from 2.22) to build glibc. Tests for 2.24 or later on x86_64 and s390 are removed. It was already the case, as indicated by buildbot results, that 2.24 was too old for building tests for 32-bit x86 (produced internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know if any configure tests for binutils features are obsolete given the increased version requirement. Tested for x86_64. * configure.ac (AS): Require binutils 2.25 or later. (LD): Likewise. * configure: Regenerated. * sysdeps/s390/configure.ac (AS): Remove version check. * sysdeps/s390/configure: Regenerated. * sysdeps/x86_64/configure.ac (AS): Remove version check. * sysdeps/x86_64/configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for binutils 2.25 or later. * INSTALL: Regenerated.
* S390: Use cu21 instruction for converting from utf16 to utf8.Stefan Liebler2017-06-272-3/+122
| | | | | | | | | | | | | | This patch adds an ifunc variant to use the cu instruction on arch12 CPUs. This new ifunc variant can be built if binutils support z13 vector instructions. At runtime, HWCAP_S390_VXE decides if we can use the cu21 instruction. ChangeLog: * sysdeps/s390/utf8-utf16-z9.c (__to_utf8_loop_vx_cu): Use vector and cu21 instruction. * sysdeps/s390/multiarch/utf8-utf16-z9.c: Add __to_utf8_loop_vx_cu in ifunc resolver.
* S390: Use cu24 instruction for converting from utf16 to utf32.Stefan Liebler2017-06-272-4/+117
| | | | | | | | | | | | | | This patch adds an ifunc variant to use the cu instruction on arch12 CPUs. This new ifunc variant can be built if binutils support z13 vector instructions. At runtime, HWCAP_S390_VXE decides if we can use the cu24 instruction. ChangeLog: * sysdeps/s390/utf16-utf32-z9.c (__from_utf16_loop_vx_cu): Use vector and cu24 instruction. * sysdeps/s390/multiarch/utf16-utf32-z9.c: Add __from_utf16_loop_vx_cu in ifunc resolver.
* S390: Use cu42 instruction for converting from utf32 to utf16.Stefan Liebler2017-06-272-4/+111
| | | | | | | | | | | | | | This patch adds an ifunc variant to use the cu instruction on arch12 CPUs. This new ifunc variant can be built if binutils support z13 vector instructions. At runtime, HWCAP_S390_VXE decides if we can use the cu42 instruction. ChangeLog: * sysdeps/s390/utf16-utf32-z9.c (__to_utf16_loop_vx_cu): Use vector and cu42 instruction. * sysdeps/s390/multiarch/utf16-utf32-z9.c: Add __to_utf16_loop_vx_cu in ifunc resolver.
* S390: Use cu41 instruction for converting from utf32 to utf8.Stefan Liebler2017-06-272-3/+117
| | | | | | | | | | | | | | This patch adds an ifunc variant to use the cu instruction on arch12 CPUs. This new ifunc variant can be built if binutils support z13 vector instructions. At runtime, HWCAP_S390_VXE decides if we can use the cu41 instruction. ChangeLog: * sysdeps/s390/utf8-utf32-z9.c (__to_utf8_loop_vx_cu): Use vector and cu41 instruction. * sysdeps/s390/multiarch/utf8-utf32-z9.c: Add __to_utf8_loop_vx_cu in ifunc resolver.
* S390: Add new hwcap values for new cpu architecture - arch12.Stefan Liebler2017-06-272-3/+7
| | | | | | | | | | | | | | | | | | | The new hwcap values indicate support for: - Vector packed decimal facility - Vector enhancements facility 1 - Guarded storage facility Note: arch12 is NOT the official name of the new CPU. It refers to the edition number of the Principle of Operations manual. ChangeLog: * sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add vxd, vxe, gs flag. * sysdeps/s390/dl-procinfo.h: Add HWCAP_S390_VXD, HWCAP_S390_VXE, HWCAP_S390_GS capability. * sysdeps/unix/sysv/linux/s390/bits/hwcap.h (HWCAP_S390_VXD, HWCAP_S390_VXE, HWCAP_S390_GS): Define.
* S390: Save and restore r12 in TLS_IE macro.Stefan Liebler2017-06-272-9/+13
| | | | | | | | | | | | | | | | | | | | | The testcases elf/tst-tls1-static and elf/tst-tls2-static are failing on s390 if gcc is configured with --enable-default-pie. According to binutils, there are only four valid cases for IE -> LE transition: lg %rx,(0,%ry) -> sllg %rx,%ry,0 lg %rx,(%ry,0) -> sllg %rx,%ry,0 lg %rx,(%ry,%r12) -> sllg %rx,%ry,0 lg %rx,(%r12,%ry) -> sllg %rx,%ry,0 Thus I've adjusted the TLS_IE macro in s390 tls-macros.h files in PIC case in order to use r12 for the address of global offset table. The adjusted macro definition is not used if gcc is not configured with --enable-default-pie. ChangeLog: * sysdeps/s390/s390-32/tls-macros.h (TLS_IE): Use r12 for GOT address. * sysdeps/s390/s390-64/tls-macros.h (TLS_IE): Likewise.
* Remove bits/string.h.Zack Weinberg2017-06-203-255/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These machine-dependent inline string functions have never been on by default, and even if they were a good idea at the time they were introduced, they haven't really been touched in ten to fifteen years and probably aren't a good idea on current-gen processors. Current thinking is that this class of optimization is best left to the compiler. * bits/string.h, string/bits/string.h * sysdeps/aarch64/bits/string.h * sysdeps/m68k/m680x0/m68020/bits/string.h * sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h * sysdeps/x86/bits/string.h: Delete file. * string/string.h: Don't include bits/string.h. * string/bits/string3.h: Rename to bits/string_fortified.h. No need to undef various symbols that the removed headers might have defined as macros. * string/Makefile (headers): Remove bits/string.h, change bits/string3.h to bits/string_fortified.h. * string/string-inlines.c: Update commentary. Remove definitions of various macros that nothing looks at anymore. Don't directly include bits/string.h. Set _STRING_INLINE_unaligned here, based on compiler-predefined macros. * string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY _is_ defined, provide internal hidden alias __strncat. * include/string.h: Declare internal hidden alias __strncat. Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is not defined. * include/bits/string3.h: Rename to bits/string_fortified.h, update to match above. * sysdeps/i386/string-inlines.c: Define compat symbols for everything formerly defined by sysdeps/x86/bits/string.h. Make existing definitions into compat symbols as well. Remove some no-longer-necessary messing around with macros. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c * sysdeps/s390/multiarch/mempcpy.c No need to define _HAVE_STRING_ARCH_mempcpy. Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * sysdeps/i386/i686/multiarch/strncat-c.c * sysdeps/s390/multiarch/strncat-c.c * sysdeps/x86_64/multiarch/strncat-c.c Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
* S390: Sync ptrace.h with kernel. [BZ #21539]Stefan Liebler2017-06-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and PTRACE_SETFPREGS as these requests does not exist on s390 kernel. But the kernel has support for PTRACE_SINGLEBLOCK, PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and PTRACE_TE_ABORT_RAND. Thus those are defined now. The current kernel s390 specific ptrace.h file also defines PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA, PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL and PTRACE_PROT, but those requests are not supported. Thus those defines are skipped in glibc ptrace.h. There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c. The ptrace feature isn't used there anymore, thus I removed the includes. Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h uses ptrace-request 12 for PTRACE_GETREGS, but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK. The s390 kernel has never had support for PTRACE_GETREGS! Thus glibc ptrace.h is adjusted to match kernel ptrace.h. The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined in glibc works as expected. If the kernel would interpret it as PTRACE_GETREGS, then the testcase will not make any progress and will time out. ChangeLog: [BZ #21539] * NEWS: Mention s390 ptrace request changes. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS, PTRACE_SETFPREGS): Remove enum constant. (PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS): Remove defines. (PTRACE_SINGLEBLOCK): New enum constant. (PT_STEPBLOCK): New define. (PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE, PTRACE_TE_ABORT_RAND): New enum constant and define. * sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes. * sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c: New file. * sysdeps/unix/sysv/linux/s390/Makefile: Add test.
* S390: Fix build with gcc configured with --enable-default-pie. [BZ #21537]Stefan Liebler2017-06-192-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building glibc with gcc configured with --enable-default-pie failed on s390 due to assembler messages: ../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44: Error: junk at end of line, first unrecognized character is `@' HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF. If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET in sysdeps/s390/s390-32/sysdep.h. There it expanded to exit@PLT in non SHARED case as PIC is defined if gcc is configured with --enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED" as we do not want PLTs in the static obj files. I've also changed this in sysdeps/s390/s390-64/sysdep.h. I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S. If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined. In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF instead of __GI_exit@GOTOFF. Now we jump to: - __GI_exit if SHARED is defined - exit@PLT if SHARED and NO_HIDDEN is defined - exit if both are not defined. On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub. Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons. ChangeLog: [BZ #21537] * sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP): Check SHARED instead of PIC. (SYSCALL_PIC_SETUP): Add missing semicolons. * sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP): Check SHARED instead of PIC. * sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S (__makecontext_ret): Adjust code to jump to exit.
* PowerPC64 ELFv2 PPC64_OPT_LOCALENTRYAlan Modra2017-06-142-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELFv2 functions with localentry:0 are those with a single entry point, ie. global entry == local entry, that have no requirement on r2 or r12 and guarantee r2 is unchanged on return. Such an external function can be called via the PLT without saving r2 or restoring it on return, avoiding a common load-hit-store for small functions. This patch implements the ld.so changes necessary for this optimization. ld.so needs to check that an optimized plt call sequence is in fact calling a function implemented with localentry:0, end emit a fatal error otherwise. The elf/testobj6.c change is to stop "error while loading shared libraries: expected localentry:0 `preload'" when running elf/preloadtest, which we'd get otherwise. * elf/elf.h (PPC64_OPT_LOCALENTRY): Define. * sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add refsym and sym parameters. Adjust callers. * sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New. (_dl_reloc_overflow): Increase buffser size. Formatting. * sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset): Delete reloc param, add refsym and sym. Check optimized plt call stubs for localentry:0 functions. Adjust callers. (elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym and sym parameters. Adjust callers. (_dl_reloc_overflow): Move attribute. (_dl_error_localentry): Declare. * elf/dl-runtime.c (_dl_fixup): Save original sym. Pass refsym and sym to elf_machine_fixup_plt. * elf/testobj6.c (preload): Call printf.
* S390: Use generic spinlock code.Stefan Liebler2017-06-064-115/+0
| | | | | | | | | | | | This patch removes the s390 specific implementation of spinlock code and is now using the generic one. ChangeLog: * sysdeps/s390/nptl/pthread_spin_init.c: Delete File. * sysdeps/s390/nptl/pthread_spin_lock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise. * sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
* Optimize generic spinlock code and use C11 like atomic macros.Stefan Liebler2017-06-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise.
* Move shared pthread definitions to common headersAdhemerval Zanella2017-05-092-261/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes all the replicated pthread definition accross the architectures and consolidates it on shared headers. The new organization is as follow: * Architecture specific definition (such as pthread types sizes) are place in the new pthreadtypes-arch.h header in arch specific path. * All shared structure definition are moved to a common NPTL header at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch specific one for internal definitions). * Also, for C11 future thread support, both mutex and condition definition are placed in a common header at sysdeps/nptl/bits/thread-shared-types.h. It is also a refactor patch without expected functional changes. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * posix/Makefile (headers): Add pthreadtypes-arch.h and thread-shared-types.h. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch specific thread definition. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nptl/bits/thread-shared-types.h: New file: shared thread definition between POSIX and C11. * sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file. * sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nptl/bits/pthreadtypes.h: New file: common thread definitions shared across all architectures.
* Rename cppflags-iterator.mk to libof-iterator.mk, remove extra-modules.mk.Zack Weinberg2017-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all it does is set libof-$(foo) for a list of files. extra-modules.mk does the same thing, but with a different input variable, and doesn't let the caller control the module. Therefore, this patch gives cppflags-iterator.mk a better name, removes extra-modules.mk, and updates all uses of both. * extra-modules.mk: Delete file. * cppflags-iterator.mk: Rename to ... * libof-iterator.mk: ...this. Adjust comments. * Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile * elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile * nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile: Use libof-iterator.mk instead of cppflags-iterator.mk or extra-modules.mk. * benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
* S390: Regenerate ULPsStefan Liebler2017-05-091-6/+6
| | | | | | | | Updated ulps file - Needed if build with GCC 7. ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* S390: Move utf8-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler2017-04-212-103/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | macro. The utf8-utf32-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf8-utf32-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf8-utf32-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change. The cu instructions are z9 zarch instructions. As the major distros are already using the newer z196 as architecture level set, those instructions can be used as fallback version instead of the c-code. This behaviour is decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT. ChangeLog: * sysdeps/s390/multiarch/utf8-utf32-z9.c: New File. * sysdeps/s390/utf8-utf32-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX]. (HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
* S390: Move utf16-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler2017-04-212-72/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | macro. The utf16-utf32-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf16-utf32-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf16-utf32-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|VX] == 1. There is no functional change. ChangeLog: * sysdeps/s390/multiarch/utf16-utf32-z9.c: New File. * sysdeps/s390/utf16-utf32-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|VX]. (HAVE_FROM_C, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
* S390: Move utf8-utf16-z9.c to multiarch folder and use s390_libc_ifunc_expr ↵Stefan Liebler2017-04-212-95/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | macro. The utf8-utf16-z9.c iconv module is using ifunc and thus the ifunc part should be in multiarch folder. Otherwise ifunc is used even if you configure with --disable-multi-arch. This patch moves the ifunc resolvers to the new file sysdeps/s390/multiarch/utf8-utf16-z9.c. The resolvers are now implemented with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly. The ifunc versions are implemented in sysdeps/s390/utf8-utf16-z9.c. Each version is only implemented if needed or supported. Therefore there is a block at beginning of the file which selects the versions which should be defined depending on support for multiarch, vector-support and used minimum architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0. The code below is rearranged and surrounded by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change. The cu instructions are z9 zarch instructions. As the major distros are already using the newer z196 as architecture level set, those instructions can be used as fallback version instead of the c-code. This behaviour is decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT. ChangeLog: * sysdeps/s390/multiarch/utf8-utf16-z9.c: New File. * sysdeps/s390/utf8-utf16-z9.c: Move ifunc resolvers to multiarch folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX]. (HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
* S390: Use new s390_libc_ifunc_expr macro in s390 8bit-generic.c.Stefan Liebler2017-04-212-29/+17
| | | | | | | | | | | | | | | | | | | This patch adds s390_libc_ifunc_expr macro which uses the __ifunc base macro in include/libc-symbols.h and lets the user define a generic expression to choose the correct ifunc variant. Furthermore as the base macro is used, the ifunc resolver functions are now also using inhibit_stack_protector. S390 needs its own version due to the hwcap argument of the ifunc resolver. This new macro is now used in iconv code in 8bit-generic.c instead of using gcc attribute ifunc directly. ChangeLog: * sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc_expr_init, s390_libc_ifunc_expr): New Define. * sysdeps/s390/multiarch/8bit-generic.c (__to_generic, __from_generic): Use s390_libc_ifunc_expr to define ifunc resolvers.
* Build divdi3 only for architecture that required itAdhemerval Zanella2017-04-061-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noted in [1], divdi3 object is only exported in a handful ABIs (i386, m68k, powerpc32, s390-32, and ia64), however it is built for all current architectures regardless. This patch refact the make rules for this object to so only the aforementioned architectures that actually require it builds it. Also, to avoid internal PLT calls to the exported symbol from the module, glibc uses an internal header (symbol-hacks.h) which is unrequired (and in fact breaks the build for architectures that intend to get symbol definitions from libgcc.a). The patch also changes it to create its own header (divdi3-symbol-hacks.h) and adjust the architectures that require it accordingly. I checked the build/check (with run-built-tests=no) on the following architectures (which I think must cover all supported ABI/builds) using GCC 6.3: aarch64-linux-gnu alpha-linux-gnu arm-linux-gnueabihf hppa-linux-gnu ia64-linux-gnu m68k-linux-gnu microblaze-linux-gnu mips64-n32-linux-gnu mips-linux-gnu mips64-linux-gnu nios2-linux-gnu powerpc-linux-gnu powerpc-linux-gnu-power4 powerpc64-linux-gnu powerpc64le-linux-gnu s390x-linux-gnu s390-linux-gnu sh4-linux-gnu sh4-linux-gnu-soft sparc64-linux-gnu sparcv9-linux-gnu tilegx-linux-gnu tilegx-linux-gnu-32 tilepro-linux-gnu x86_64-linux-gnu x86_64-linux-gnu-x32 i686-linux-gnu I only saw one regression on sparcv9-linux-gnu (extra PLT call to .udiv) which I address in next patch in the set. It also correctly build SH with GCC 7.0.1 (without any regression from c89721e25d). [1] https://sourceware.org/ml/libc-alpha/2017-03/msg00243.html * sysdeps/i386/symbol-hacks.h: New file. * sysdeps/m68k/symbol-hacks.h: New file. * sysdeps/powerpc/powerpc32/symbol-hacks.h: New file. * sysdeps/s390/s390-32/symbol-hacks.h: New file. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = csu] (sysdep_routines): New rule: divdi3 object. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/wordsize-32/Makefile: Remove file. * sysdeps/wordsize-32/symbol-hacks.h: Definitions move to ... * sysdeps/wordsize-32/divdi3-symbol-hacks.h: ... here.
* S390: Clobber also r14 in TLS_LD, TLS_GD macros on 31bit.Stefan Liebler2017-04-041-4/+6
| | | | | | | | | | | | | | | | | | This patch also clobbers r14 in TLS_LD, TLS_GD macros on 31bit. This ensures that r14 isn't used to save and restore r12 while r14 is clobbered by the bas-instruction. As note: r12 can't be added to clobber list as gcc would fail with: error: PIC register clobbered by ‘12’ in ‘asm’ For 64bit this fix was already done in 2004 in the commit b80af23ac6973e69df6cd23d221fa44fffb21e17. ChangeLog: * sysdeps/s390/s390-32/tls-macros.h (TLS_LD, TLS_GD): Clobber also r14.
* Remove _dl_platform_stringAndreas Schwab2017-03-141-7/+0
| | | | There are no non-trivial uses of _dl_platform_string.
* Update auto-libm-test-out for catan / catanh.Stefan Liebler2017-03-101-16/+16
| | | | | | | | | | | | | | I've used gmp 6.1.2, mpfr 3.1.5 and upstream mpc with fix in mpc_atan (https://scm.gforge.inria.fr/anonscm/gitweb?p=mpc/mpc.git;a=commit;h=958aac9b15a659d6fb5edcb11778123f8a35b14f) to build gen-auto-libm-tests and regenerated catan / catanh out files. Regenerated ULPs for s390 from scratch. Now the catan / catanh tests are passing. ChangeLog: * math/auto-libm-test-out-catan: Regenerated. * math/auto-libm-test-out-catanh: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise.
* S390: Regenerate ULPsStefan Liebler2017-03-081-128/+136
| | | | | | | | | | | Updated ulps file. There are still fails for long double catan / catanh due to MPC bug. See post from Joseph Myers: https://www.sourceware.org/ml/libc-alpha/2017-03/msg00099.html ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* S390: Optimize atomic macros.Stefan Liebler2017-03-061-64/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch activates C11 atomic builtins by defining USE_ATOMIC_COMPILER_BUILTINS to 1. Note: E.g. in nptl/pthread_key_delete.c if compiled with GCCs 6 and before, an extra stack-frame is generated and the old value is stored on stack before cs instruction but it never loads this value from stack. An unreleased GCC 7 omit those stack operations. E.g. in nptl/pthread_once.c the condition code of cs instruction is evaluated by a sequence of ipm, sra, compare and jump instructions instead of one conditional jump instruction. This also occurs with an unreleased GCC 7. These shortcomings does not really hurt. Nevertheless, the gcc guys are investigating those ones and plan to fix them before GCC 7 release. The atomic_fetch_abc_def C11 builtins are now using load-and-abc instructions on z196 zarch and higher cpus instead of a loop with compare-and-swap instruction. Some of the non-C11 atomic macros from include/atomic.h are now implemented with help of the C11 atomic builtins. The other non-C11 atomic macros are using the macros defined here. ChangeLog: * sysdeps/s390/atomic-machine.h (USE_ATOMIC_COMPILER_BUILTINS): Define to 1. (__arch_compare_and_exchange_val_8_acq, __arch_compare_and_exchange_val_16_acq, __arch_compare_and_exchange_val_32_acq, __arch_compare_and_exchange_val_64_acq): Delete macro. (atomic_compare_and_exchange_val_acq, atomic_compare_and_exchange_val_rel, atomic_compare_and_exchange_bool_acq, catomic_compare_and_exchange_bool_acq, atomic_exchange_acq, atomic_exchange_rel, atomic_exchange_and_add_acq, atomic_exchange_and_add_rel, catomic_exchange_and_add, atomic_or_val, atomic_or, catomic_or, atomic_bit_test_set, atomic_and_val, atomic_and, catomic_and): Define macros with help of C11 atomic builtins.
* New pthread rwlock that is more scalable.Torvald Riegel2017-01-101-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This replaces the pthread rwlock with a new implementation that uses a more scalable algorithm (primarily through not using a critical section anymore to make state changes). The fast path for rdlock acquisition and release is now basically a single atomic read-modify write or CAS and a few branches. See nptl/pthread_rwlock_common.c for details. * nptl/DESIGN-rwlock.txt: Remove. * nptl/lowlevelrwlock.sym: Remove. * nptl/Makefile: Add new tests. * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, PTHREAD_RWLOCK_FUTEX_USED): New. * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new implementation. * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. (__pthread_rwlock_rdlock): Adapt. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Adapt. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Adapt. * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. (__pthread_rwlock_wrlock): Adapt. * nptl/tst-rwlock10.c: Adapt. * nptl/tst-rwlock11.c: Adapt. * nptl/tst-rwlock17.c: New file. * nptl/tst-rwlock18.c: New file. * nptl/tst-rwlock19.c: New file. * nptl/tst-rwlock2b.c: New file. * nptl/tst-rwlock8.c: Adapt. * nptl/tst-rwlock9.c: Adapt. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * nptl/nptl-printers.py (): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-rwlock-printers.py: Adapt. * nptl/test-rwlockattr-printers.c: Adapt. * nptl/test-rwlockattr-printers.py: Adapt.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-01259-259/+259
|
* New condvar implementation that provides stronger ordering guarantees.Torvald Riegel2016-12-311-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new implementation for condition variables, required after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In essence, we need to be stricter in which waiters a signal or broadcast is required to wake up; this couldn't be solved using the old algorithm. ISO C++ made a similar clarification, so this also fixes a bug in current libstdc++, for example. We can't use the old algorithm anymore because futexes do not guarantee to wake in FIFO order. Thus, when we wake, we can't simply let any waiter grab a signal, but we need to ensure that one of the waiters happening before the signal is woken up. This is something the previous algorithm violated (see bug 13165). There's another issue specific to condvars: ABA issues on the underlying futexes. Unlike mutexes that have just three states, or semaphores that have no tokens or a limited number of them, the state of a condvar is the *order* of the waiters. A waiter on a semaphore can grab a token whenever one is available; a condvar waiter must only consume a signal if it is eligible to do so as determined by the relative order of the waiter and the signal. Therefore, this new algorithm maintains two groups of waiters: Those eligible to consume signals (G1), and those that have to wait until previous waiters have consumed signals (G2). Once G1 is empty, G2 becomes the new G1. 64b counters are used to avoid ABA issues. This condvar doesn't yet use a requeue optimization (ie, on a broadcast, waking just one thread and requeueing all others on the futex of the mutex supplied by the program). I don't think doing the requeue is necessarily the right approach (but I haven't done real measurements yet): * If a program expects to wake many threads at the same time and make that scalable, a condvar isn't great anyway because of how it requires waiters to operate mutually exclusive (due to the mutex usage). Thus, a thundering herd problem is a scalability problem with or without the optimization. Using something like a semaphore might be more appropriate in such a case. * The scalability problem is actually at the mutex side; the condvar could help (and it tries to with the requeue optimization), but it should be the mutex who decides how that is done, and whether it is done at all. * Forcing all but one waiter into the kernel-side wait queue of the mutex prevents/avoids the use of lock elision on the mutex. Thus, it prevents the only cure against the underlying scalability problem inherent to condvars. * If condvars use short critical sections (ie, hold the mutex just to check a binary flag or such), which they should do ideally, then forcing all those waiter to proceed serially with kernel-based hand-off (ie, futex ops in the mutex' contended state, via the futex wait queues) will be less efficient than just letting a scalable mutex implementation take care of it. Our current mutex impl doesn't employ spinning at all, but if critical sections are short, spinning can be much better. * Doing the requeue stuff requires all waiters to always drive the mutex into the contended state. This leads to each waiter having to call futex_wake after lock release, even if this wouldn't be necessary. [BZ #13165] * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to use new algorithm. * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. (__condvar_confirm_wakeup, __condvar_cancel_waiting, __condvar_cleanup_waiting, __condvar_dec_grefs, __pthread_cond_wait_common): New. (__condvar_cleanup): Remove. * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): Likewise. * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. * nptl/tst-cond1.c: Add comment. * nptl/tst-cond20.c (do_test): Adapt. * nptl/tst-cond22.c (do_test): Likewise. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt structure. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. (COND_CLOCK_BITS): Adapt. * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, __PTHREAD_COND_SHARED_MASK): New. * nptl/nptl-printers.py (CLOCK_IDS): Remove. (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-cond-printers.py: Adapt. * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, cond_compat_check_and_clear): Adapt. * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_timedwait): ... and move here. * nptl/DESIGN-condvar.txt: Remove file. * nptl/lowlevelcond.sym: Likewise. * nptl/pthread_cond_timedwait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
* Fix typos in the spelling of "implementation"Dmitry V. Levin2016-12-272-2/+2
| | | | | | | | | | | | | Apply the following spelling fix: $ git grep -El 'implemetn?ation' | xargs sed -ri 's/implemetn?ation/implementation/g' [BZ #19514] * resolv/res_send.c: Fix typo in comment. * sysdeps/i386/i386-mcount.S: Likewise. * sysdeps/s390/s390-32/s390-mcount.S: Likewise. * sysdeps/s390/s390-64/s390x-mcount.S: Likewise. * sysdeps/sparc/sparc-mcount.S: Likewise.
* Refactor long double information into bits/long-double.h.Joseph Myers2016-12-143-42/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Information about whether the ABI of long double is the same as that of double is split between bits/mathdef.h and bits/wordsize.h. When the ABIs are the same, bits/mathdef.h defines __NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc binary supports both -mlong-double-64 and -mlong-double-128, bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with __NO_LONG_DOUBLE_MATH if this particular compilation is with -mlong-double-64. As part of the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this patch puts all that information in a single header, bits/long-double.h. It is included from sys/cdefs.h alongside the include of bits/wordsize.h, so other headers generally do not need to include bits/long-double.h directly. Previously, various bits/mathdef.h headers and bits/wordsize.h headers had this long double information (including implicitly in some bits/mathdef.h headers through not having the defines present in the default version). After the patch, it's all in six bits/long-double.h headers. Furthermore, most of those new headers are not architecture-specific. Architectures with optional long double all use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128, ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header for the case where long double = double, and headers in ldbl-128, ldbl-96 and ldbl-opt, suffices to cover every architecture except for cases where long double properties vary between different ABIs sharing a set of installed headers; fortunately all the ldbl-opt cases share a single compiler-predefined macro __LONG_DOUBLE_128__ that can be used to tell whether this compilation is -mlong-double-64 or -mlong-double-128. The two cases where a set of headers is shared between ABIs with different long double properties, MIPS (o32 has long double = double, other ABIs use ldbl-128) and SPARC (32-bit has optional long double, 64-bit has required long double), need their own bits/long-double.h headers. As with bits/wordsize.h, multiple-include protection for this header is generally implicit through the include guards on sys/cdefs.h, and multiple inclusion is harmless in any case. There is one subtlety: the header must not define __LONG_DOUBLE_MATH_OPTIONAL if __NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines __NO_LONG_DOUBLE_MATH itself before including system headers. Subject to keeping that working, it would be reasonable to move these macros from defined/undefined #ifdef to always-defined 1/0 #if semantics, but this patch does not attempt to do so, just rearranges where the macros are defined. After this patch, the only use of bits/mathdef.h is the alpha one for modifying complex function ABIs for old GCC. Thus, all versions of the header other than the default and alpha versions are removed, as is the include from math.h. Tested for x86_64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/long-double.h: New file. * sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise. * sysdeps/mips/bits/long-double.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise. * math/Makefile (headers): Add bits/long-double.h. * misc/sys/cdefs.h: Include <bits/long-double.h>. * stdlib/strtold.c: Include <bits/long-double.h> instead of <bits/wordsize.h>. * bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. [!__NO_LONG_DOUBLE_MATH]: Remove conditional code. * math/math.h: Do not include <bits/mathdef.h>. * sysdeps/aarch64/bits/mathdef.h: Remove file. * sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. * sysdeps/ia64/bits/mathdef.h: Remove file. * sysdeps/m68k/m680x0/bits/mathdef.h: Likewise. * sysdeps/mips/bits/mathdef.h: Likewise. * sysdeps/powerpc/bits/mathdef.h: Likewise. * sysdeps/s390/bits/mathdef.h: Likewise. * sysdeps/sparc/bits/mathdef.h: Likewise. * sysdeps/x86/bits/mathdef.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove conditional code. * sysdeps/s390/s390-64/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise.
* S390: Regenerate ULPs.Stefan Liebler2016-12-021-6/+6
| | | | | | | | Updated ulps file. ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* Refactor FP_ILOGB* out of bits/mathdef.h.Joseph Myers2016-12-011-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch stops it defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to a new header bits/fp-logb.h. There are only two possible values of each of those macros permitted by ISO C. TS 18661-1 adds corresponding macros for llogb, and their values are required to correspond to those of the ilogb macros in the obvious way. Thus two boolean values - for which the same choices are correct for most architectures - suffice to determine the value of all these macros, and by defining macros for those boolean values in bits/fp-logb.h we can then define the public FP_* macros in math.h and avoid the present duplication of the associated feature test macro logic. This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and __FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct for both architectures, while ia64, m68k and x86 get their own versions of bits/fp-logb.h to reflect their use of values different from the defaults. The patch renders many copies of bits/mathdef.h trivial (needed only to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise <https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html> accordingly so that it removes all bits/mathdef.h headers except the default one and the alpha one, and arranges for the header to be included only by complex.h as the only remaining use at that point will be for the alpha ABI issues there. Tested for x86_64 and x86. Also did compile-only testing with build-many-glibcs.py (using glibc sources from before the commit that introduced many build failures with undefined __GI___sigsetjmp). * bits/fp-logb.h: New file. * sysdeps/ia64/bits/fp-logb.h: Likewise. * sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise. * sysdeps/x86/bits/fp-logb.h: Likewise. * math/Makefile (headers): Add bits/fp-logb.h. * math/math.h: Include <bits/fp-logb.h>. [__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN. [__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN. * bits/mathdef.h (FP_ILOGB0): Remove. (FP_ILOGBNAN): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise.
* Remove cached PID/TID in cloneAdhemerval Zanella2016-11-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
* Refactor float_t, double_t information into bits/flt-eval-method.h.Joseph Myers2016-11-242-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present, definitions of float_t and double_t are split among many bits/mathdef.h headers. For all but three architectures, these types are float and double. Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that provides a more generic way of determining the correct values of these typedefs. Defining these typedefs more generally based on __FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in <https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>. This patch refactors things in the way I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new header bits/flt-eval-method.h defines a single macro, __GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define float_t and double_t. The default is based on __FLT_EVAL_METHOD__ (although actually a default to 0 would have the same effect for current ports, because ports where values other than 0 or 16 are possible all have their own headers). To avoid changing the existing semantics in any case, including for compilers not defining __FLT_EVAL_METHOD__, architecture-specific files are then added for m68k, s390, x86 which replicate the existing semantics. At least with __FLT_EVAL_METHOD__ values possible with GCC, there should be no change to the choices of float_t and double_t for any supported configuration. Architecture maintainer notes: * m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It might make sense to make the header prefer to base things on __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make the choices of these types more accurate (with a NEWS entry as for the other changes to these types on particular architectures). * s390: sysdeps/s390/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As previously discussed, it might make sense in coordination with GCC to eliminate the historic mistake, avoid excess precision in the -fexcess-precision=standard case and make the typedefs match (with a NEWS entry, again). Tested for x86-64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/flt-eval-method.h: New file. * sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise. * sysdeps/s390/bits/flt-eval-method.h: Likewise. * sysdeps/x86/bits/flt-eval-method.h: Likewise. * math/Makefile (headers): Add bits/flt-eval-method.h. * math/math.h: Include <bits/flt-eval-method.h>. [__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD. [__USE_ISOC99] (double_t): Likewise. * bits/mathdef.h (float_t): Remove. (double_t): Likewise. * sysdeps/aarch64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/alpha/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/arm/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/ia64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/mips/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/powerpc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/s390/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sparc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/tile/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/x86/bits/mathdef.h (float_t): Likewise. (double_t): Likewise.
* s390x: Add hidden definition for __sigsetjmpFlorian Weimer2016-11-152-36/+48
|
* nptl: Document the reason why __kind in pthread_mutex_t is part of the ABIFlorian Weimer2016-11-071-1/+1
|
* Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).Joseph Myers2016-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
* Define wordsize.h macros everywhereSteve Ellcey2016-11-042-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * bits/wordsize.h: Add documentation. * sysdeps/aarch64/bits/wordsize.h : New file * sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update definitions. (SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check. * sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check with #if instead of #ifdef. * sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto. * sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG, __WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32): Add or change defines. * sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise. * sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h: Likewise. * sysdeps/s390/s390-64/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc32/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc64/bits/wordsize.h: Likewise. * sysdeps/tile/tilegx/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise. * sysdeps/wordsize-32/bits/wordsize.h: Likewise. * sysdeps/wordsize-64/bits/wordsize.h: Likewise. * sysdeps/x86/bits/wordsize.h: Likewise.
* S390: Fix fp comparison not raising FE_INVALID.Stefan Liebler2016-10-171-0/+36
| | | | | | | As gcc is using unordered comparison instructions which do not raise invalid exception if any operand is quiet NAN, FIX_COMPARE_INVALID is defined to 1. Thus iseqsig is calling feraiseexcept as workaround.
* s390: Refactor ifunc resolvers due to false debuginfo.Stefan Liebler2016-10-0730-85/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts the s390 specific ifunc helper macros in ifunc-resolve.h to use the common __ifunc macro, which uses gcc attribute ifunc to get rid of the false debuginfo. Therefore the redirection construct is applied where needed. Perhaps in future we can switch some of the internal symbols __GI_* from the fallback variant to the ifunc function. But this change is not straightforward due to a segmentation fault while linking libc.so with older binutils on s390. ChangeLog: [BZ #20478] * sysdeps/s390/multiarch/ifunc-resolve.h (s390_vx_libc_ifunc2, s390_libc_ifunc): Use __ifunc from libc-symbols.h to create ifunc symbols. (s390_vx_libc_ifunc_init, s390_vx_libc_ifunc_redirected , s390_vx_libc_ifunc2_redirected, s390_libc_ifunc_init): New define. * sysdeps/s390/multiarch/memchr.c: Redirect ifunced function in header for using it as type for ifunc function. * sysdeps/s390/multiarch/mempcpy.c: Likewise. * sysdeps/s390/multiarch/rawmemchr.c: Likewise. * sysdeps/s390/multiarch/stpcpy.c: Likewise. * sysdeps/s390/multiarch/stpncpy.c: Likewise. * sysdeps/s390/multiarch/strcat.c: Likewise. * sysdeps/s390/multiarch/strchr.c: Likewise. * sysdeps/s390/multiarch/strcmp.c: Likewise. * sysdeps/s390/multiarch/strcpy.c: Likewise. * sysdeps/s390/multiarch/strcspn.c: Likewise. * sysdeps/s390/multiarch/strlen.c: Likewise. * sysdeps/s390/multiarch/strncmp.c: Likewise. * sysdeps/s390/multiarch/strncpy.c: Likewise. * sysdeps/s390/multiarch/strnlen.c: Likewise. * sysdeps/s390/multiarch/strpbrk.c: Likewise. * sysdeps/s390/multiarch/strrchr.c: Likewise. * sysdeps/s390/multiarch/strspn.c: Likewise. * sysdeps/s390/multiarch/wcschr.c: Likewise. * sysdeps/s390/multiarch/wcscmp.c: Likewise. * sysdeps/s390/multiarch/wcspbrk.c: Likewise. * sysdeps/s390/multiarch/wcsspn.c: Likewise. * sysdeps/s390/multiarch/wmemchr.c: Likewise. * sysdeps/s390/multiarch/wmemset.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy.c: Likewise. * sysdeps/s390/s390-32/multiarch/memset.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcpy.c: Likewise. * sysdeps/s390/s390-64/multiarch/memset.c: Likewise.
* S390: Regenerate ULPsStefan Liebler2016-10-041-8/+2
| | | | | | | | Regenerated ulps file after recent commit "Use __builtin_fma more in dbl-64 code.". ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* Remove the ptw-% patternsFlorian Weimer2016-09-141-2/+2
| | | | | | | | | | Nothing depends on the PTW macro anymore, so the mechanism to define PTW for recompliations of libc routines is no longer needed. The source files are still recompiled for the nptl directory, just without the “ptw-” prefix. (Reducing the number of pattern rules in sysd-rules is critical for improving make performance.)
* Add femode_t functions: s390.Joseph Myers2016-09-072-0/+66
| | | | | | | This patch adds S/390 versions of fegetmode and fesetmode. Untested. * sysdeps/s390/fpu/fegetmode.c: New file. * sysdeps/s390/fpu/fesetmode.c: Likewise.
* Add femode_t functions.Joseph Myers2016-09-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* S390: Do not set FE_INEXACT with feraiseexcept (FE_OWERFLOW|FE_UNDERFLOW).Stefan Liebler2016-08-314-6/+100
| | | | | | | | | | | | | | | | | | | | | | | | | On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too. This patch uses z196 zarch load rounded instruction which can suppress FE_INEXACT exception if gcc has z196 support in used configuration. Otherwise FE_INEXACT flag is set as before. The gcc support is tested in a new configure-check. A comment in fsetexcptflg.c is corrected as new exceptions are not executed with the next floating-point instruction if fpc is set with _FPU_SETCW macro. It seems the comment was copied e.g. from sysdeps/x86_64/fpu/fsetexcptflg.c file. ChangeLog: * config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT): New undefine. * sysdeps/s390/configure.ac: Add test for z196 zarch support. * sysdeps/s390/configure: Regenerated. * sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra instruction for raising over-/underflow if z196 zarch is supported by default. * sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag): Correct comment.
* Add fetestexceptflag.Joseph Myers2016-08-291-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines an fetestexceptflag function to test the exception state saved in an fexcept_t object by fegetexceptflag. This patch implements this function for glibc. Almost all architectures save exception state in such a way that it can be directly ANDed with exception flag bits, so rather than having lots of fetestexceptflag implementations that all do the same thing, the math/ implementation is made to use this generic logic (which is also OK in the fallback case where FE_ALL_EXCEPT is zero). The only architecture that seems to need anything different is s390. (fegetexceptflag and fesetexceptflag use abbreviated filenames fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned by 14-character filename limits, fetestexceptflag uses the obvious filename fetestexceptflag.c.) The NEWS entry is intended to be expanded along the lines given in <https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when fegetmode and fesetmode are added. Tested for x86_64, x86, mips64 and powerpc. * math/fetestexceptflag.c: New file. * sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by Stefan Liebler. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fetestexceptflag): New function declaration. * manual/arith.texi (fetestexceptflag): Document function. * math/Versions (fetestexceptflag): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fetestexceptflag. (tests): Add test-fetestexceptflag. * math/test-fetestexceptflag.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Do not override objects in libc.a in other static libraries [BZ #20452]Florian Weimer2016-08-171-0/+1
| | | | | With this change, we no longer add sysdep.o and similar objects which are present in libc.a to other static libraries.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-21 19:09:08 +0000