about summary refs log tree commit diff
path: root/sysdeps/s390
Commit message (Collapse)AuthorAgeFilesLines
* s390x: Fix segfault in wcsncmp [BZ #31934] release/2.32/masterStefan Liebler2024-07-161-9/+1
| | | | | | | | | | | | | | | | | | | | | The z13/vector-optimized wcsncmp implementation segfaults if n=1 and there is only one character (equal on both strings) before the page end. Then it loads and compares one character and misses to check n again. The following load fails. This patch removes the extra load and compare of the first character and just start with the loop which uses vector-load-to-block-boundary. This code-path also checks n. With this patch both tests are passing: - the simplified one mentioned in the bugzilla 31934 - the full one in Florian Weimer's patch: "manual: Document a GNU extension for strncmp/wcsncmp" (https://patchwork.sourceware.org/project/glibc/patch/874j9eml6y.fsf@oldenburg.str.redhat.com/): On s390x-linux-gnu (z16), the new wcsncmp test fails due to bug 31934. Reviewed-by: Carlos O'Donell <carlos@redhat.com> (cherry picked from commit 9b7651410375ec8848a1944992d663d514db4ba7)
* S390: Also check vector support in memmove ifunc-selector [BZ #27511]Stefan Liebler2021-03-264-6/+15
| | | | | | | | | | | | | | | | | The arch13 memmove variant is currently selected by the ifunc selector if the Miscellaneous-Instruction-Extensions Facility 3 facility bit is present, but the function is also using vector instructions. If the vector support is not present, one is receiving an operation exception. Therefore this patch also checks for vector support in the ifunc selector and in ifunc-impl-list.c. Just to be sure, the configure check is now also testing an arch13 vector instruction and an arch13 Miscellaneous-Instruction-Extensions Facility 3 instruction. (cherry picked from commit 7759be2593b689cb1eafc0f52ee7f59c639e5d2f)
* S390: Optimize __memset_z196.Stefan Liebler2020-06-261-10/+9
| | | | | | | | It turned out that an 256b-mvc instruction which depends on the result of a previous 256b-mvc instruction is counterproductive. Therefore this patch adjusts the 256b-loop by storing the first byte with stc and setting the remaining 255b with mvc. Now the 255b-mvc instruction depends on the stc instruction.
* S390: Optimize __memcpy_z196.Stefan Liebler2020-06-261-6/+15
| | | | | | This patch introduces an extra loop without pfd instructions as it turned out that the pfd instructions are usefull for copies >=64KB but are counterproductive for smaller copies.
* S390: Regenerate ULPs.Stefan Liebler2020-06-241-0/+2
| | | | Updates needed after recent exp10f commits.
* s390: Use sqrt{f} builtinAdhemerval Zanella2020-06-223-60/+4
| | | | Checked on s390x-linux-gnu.
* s390x: Use fma{f} builtinAdhemerval Zanella2020-06-223-64/+4
| | | | Checked on s390x-linux-gnu.
* math: Decompose math-use-builtins.hAdhemerval Zanella2020-06-227-119/+90
| | | | | | | | | | | Each symbol definitions are moved on a separated file and it cover all symbol type definitions (float, double, long double, and float128). It allows to set support for architectures without the boiler place of copying default values. Checked with a build on the affected ABIs.
* ieee754: provide gcc builtins based generic fma functionsVineet Gupta2020-06-031-0/+5
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ieee754: provide gcc builtins based generic sqrt functionsVineet Gupta2020-06-031-0/+3
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* semaphore: consolidate arch headers into a generic oneVineet Gupta2020-05-061-39/+0
| | | | | | | | | | | | | | | | | | This consolidates the copy-pasted arch specific semaphore header into single version (based on s390) which suffices 32-bit and and 64-bit arch/ABI based on the canonical WORDSIZE. For now I've left out arches which use alternate defines to choose for 32 vs 64-bit builds (aarch64, mips) which in theory can also use the same header. Passes build-many for aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64 x86_64-linux-gnu microblaze-linux-gnu nios2-linux-gnu Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Remove most gmp-mparam.h headers.Joseph Myers2020-04-241-30/+0
| | | | | | | | | | | | | | Most gmp-mparam.h headers in glibc define various macros to the same values they would be defined to by the generic version of that header, plus macros IEEE_DOUBLE_BIG_ENDIAN or IEEE_DOUBLE_MIXED_ENDIAN related to the representation of double. The latter macros are in turn only used in gmp-impl.h to define union ieee_double_extract, which is not used in glibc. Thus all of these headers, except for the generic one and those that define _LONG_LONG_LIMB for ILP32 configurations with 64-bit registers, are redundant, and this patch removes them. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch.
* S390: Regenerate ULPs.Stefan Liebler2020-04-031-15/+19
| | | | | | Updates needed after recent commit a9d42c09a327540a99f2eac25a98fd2ad6d0b540 math: Add inputs that yield larger errors for float type (x86_64)
* math: Remove inline math testsAdhemerval Zanella2020-03-191-817/+0
| | | | | | | | | | | | | With mathinline removal there is no need to keep building and testing inline math tests. The gen-libm-tests.py support to generate ULP_I_* is removed and all libm-test-ulps files are updated to longer have the i{float,double,ldouble} entries. The support for no-test-inline is also removed from both gen-auto-libm-tests and the auto-libm-test-out-* were regenerated. Checked on x86_64-linux-gnu and i686-linux-gnu.
* S390: Remove backchain-based fallback and use generic backtrace.c.Stefan Liebler2020-03-052-295/+0
| | | | | | | | | | | | | | | | | | | | | | After recent discussions: - "[PATCH] s390: Remove backchain-based fallback from backtrace" https://www.sourceware.org/ml/libc-alpha/2020-02/msg00287.html - "Re: [PATCH 07/11] s390: Implement backtrace on top of <unwind-link.h>" https://www.sourceware.org/ml/libc-alpha/2020-02/msg00637.html We've checked and decided to remove the backchain: We don't know of any environments without libgcc. Thus the backchain unwinder is not used. If somebody builds with -mbackchain and without fasynchronous-unwind-tables and has libgcc installed, then the libgcc unwinder is called but not the backchain-based fallback. This step allows to get rid of the s390x specific backtrace.c files at all. Furthermore the now used debug/backtrace.c version has some more advantages: - Free all resources if necessary. (libc_freeres_fn) - Remove NULL address above _start. - Check whether we make any progress while getting addresses.
* Introduce <elf-initfini.h> and ELF_INITFINI for all architecturesFlorian Weimer2020-02-181-0/+20
| | | | | | | | | | | | | | | | This supersedes the init_array sysdeps directory. It allows us to check for ELF_INITFINI in both C and assembler code, and skip DT_INIT and DT_FINI processing completely on newer architectures. A new header file is needed because <dl-machine.h> is incompatible with assembler code. <sysdep.h> is compatible with assembler code, but it cannot be included in all assembler files because on some architectures, it redefines register names, and some assembler files conflict with that. <elf-initfini.h> is replicated for legacy architectures which need DT_INIT/DT_FINI support. New architectures follow the generic default and disable it.
* S390: Fix non-ascii character in fenv.h.Stefan Liebler2020-02-121-2/+2
| | | | | | | | | | | | | | | | | The comment "isn't" contained a non-ascii character which leads to an error if compiled with -finput-charset=ascii: error: failure to convert ascii to UTF-8 This is observable in GCC testsuite: FAIL: 17_intro/headers/c++1998/charset.cc (test for excess errors) FAIL: 17_intro/headers/c++2011/charset.cc (test for excess errors) FAIL: 17_intro/headers/c++2014/charset.cc (test for excess errors) FAIL: 17_intro/headers/c++2017/charset.cc (test for excess errors) FAIL: 17_intro/headers/c++2020/charset.cc (test for excess errors) Also rewrite the comment above. Reported-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-033-3/+6
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01309-309/+309
|
* S390: Use sysdeps/ieee754/dbl-64/wordsize-64 on s390x.Stefan Liebler2019-12-111-0/+1
| | | | | This patch enables the usage of implementations in sysdeps/ieee754/dbl-64/wordsize-64 on 64bit s390x.
* S390: Implement roundtoint and converttoint and define TOINT_INTRINSICS.Stefan Liebler2019-12-111-0/+53
| | | | | | | This patch implements roundtoint and convertoint for s390 by using the load-fp-integer and convert-to-fixed instructions. Both functions are using "round to nearest with ties away from zero" rounding mode and do not raise inexact exceptions.
* S390: Implement math-barriers math_opt_barrier and math_force_eval.Stefan Liebler2019-12-111-0/+46
| | | | | This patch implements the s390 specific math barriers in order to omit the store and load from stack if possible.
* S390: Use libc_fe* macros in fe* functions.Stefan Liebler2019-12-119-124/+27
| | | | | | | | | | | This patch updates the s390 specific functions fegetround, fesetround, feholdexcept, fesetenv, feupdateenv, fegetexceptflag, fetestexcept, fesetexceptflag, fetestexceptflag. Now those functions are using the libc_fe* macros if possible. Furthermore fegetexceptflag is now returning the exception from dxc field shifted to the usual exception-flags. Thus a special fetestexceptflag implementation is not needed anymore.
* S390: Implement libc_fe* macros.Stefan Liebler2019-12-111-0/+250
| | | | | | | | This patch provides the s390 specific implementation for libc_feholdexcept, libc_fesetround, libc_feholdexcept_setround, libc_fetestexcept, libc_fesetenv, libc_feupdateenv_test, libc_feupdateenv, libc_feholdsetround_ctx, libc_feresetround_ctx, libc_feholdsetround_noex_ctx and libc_feresetround_noex_ctx.
* S390: Use convert-to-fixed instruction for llround functions.Stefan Liebler2019-12-113-0/+127
| | | | | | If compiled with z196 zarch support, the convert-to-fixed instruction is used to implement llround, llroundf, llroundl. Otherwise the common-code implementation is used.
* S390: Use convert-to-fixed instruction for lround functions.Stefan Liebler2019-12-113-0/+142
| | | | | | If compiled with z196 zarch support, the convert-to-fixed instruction is used to implement lround, lroundf, lroundl. Otherwise the common-code implementation is used.
* S390: Use convert-to-fixed instruction for llrint functions.Stefan Liebler2019-12-113-0/+151
| | | | | | If compiled with z196 zarch support, the convert-to-fixed instruction is used to implement llrint, llrintf, llrintl. Otherwise the common-code implementation is used.
* S390: Use convert-to-fixed instruction for lrint functions.Stefan Liebler2019-12-113-0/+166
| | | | | | If compiled with z196 zarch support, the convert-to-fixed instruction is used to implement lrint, lrintf, lrintl. Otherwise the common-code implementation is used.
* S390: Use load-fp-integer instruction for roundeven functions.Stefan Liebler2019-12-113-0/+116
| | | | | | If compiled with z196 zarch support, the load-fp-integer instruction is used to implement roundeven, roundevenf, roundevenl. Otherwise the common-code implementation is used.
* Use GCC builtins for copysign functions if desired.Stefan Liebler2019-12-111-0/+7
| | | | | | | | | | | | This patch is always using the corresponding GCC builtin for copysignf, copysign, and is using the builtin for copysignl, copysignf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. Altough the long double version is enabled by default we still need the macro and the alternative implementation as the _Float128 version of the builtin is not available with all supported GCC versions. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for round functions if desired.Stefan Liebler2019-12-111-0/+11
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for roundf, round, roundl and roundf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for trunc functions if desired.Stefan Liebler2019-12-111-0/+11
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for truncf, trunc, truncl and truncf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for ceil functions if desired.Stefan Liebler2019-12-111-0/+11
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for ceilf, ceil, ceill and ceilf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for floor functions if desired.Stefan Liebler2019-12-111-0/+11
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for floorf, floor, floorl and floorf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for rint functions if desired.Stefan Liebler2019-12-111-0/+11
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for rintf, rint, rintl and rintf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for nearbyint functions if desired.Stefan Liebler2019-12-111-0/+49
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for nearbyintf, nearbyint, nearbintl and nearbyintf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* S390: Fix handling of needles crossing a page in strstr z15 ifunc-variant. ↵Stefan Liebler2019-11-271-1/+1
| | | | | | | | | | | | | | | | | [BZ #25226] If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of strstr truncates the needle which results in invalid results. This is fixed by loading the needle beyond the page boundary to v18 instead of v16. The bug is sometimes observable in test-strstr.c in check1 and check2 as the haystack and needle is stored on stack. Thus the needle can be on a page boundary. check2 is now extended to test haystack / needles located on stack, at end of page and on two pages. This bug was introduced with commit 6f47401bd5fc71209219779a0426170a9a7395b0 ("S390: Add arch13 strstr ifunc variant.") and is already released in glibc 2.30.
* nptl: Add default pthreadtypes-arch.hAdhemerval Zanella2019-11-261-43/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch adds a default pthreadtypes-arch.h, the idea is to simpify new ports inclusion and an override is required only if the architecture adds some arch-specific extensions or requirement. The default values on the new generic header are based on current architecture define value and they are not optimal compared to current code requirements as below. - On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is sizeof (struct pthread_barrier) is 20 bytes. - On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while sizeof (struct pthread_attr) is 32. The default values are not changed so the generic header could be used by some architectures. Checked with a build on affected abis. Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
* nptl: Add struct_rwlock.hAdhemerval Zanella2019-11-262-27/+58
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic __pthread_rwlock_arch_t definition meant to be used by new ports. Its layout mimics the current usage on some 64 bits ports and it allows some ports to use the generic definition. The arch __pthread_rwlock_arch_t definition is moved from pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h). Also the static intialization macro for pthread_rwlock_t is set to use an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its implementation. The default pthread_rwlock_t layout differs from current ports with: 1. Internal layout is the same for 32 bits and 64 bits. 2. Internal flag is an unsigned short so it should not required additional padding to align for word boundary (if it is the case for the ABI). Checked with a build on affected abis. Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
* nptl: Add struct_mutex.hAdhemerval Zanella2019-11-262-7/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current way of defining the common mutex definition for POSIX and C11 on pthreadtypes-arch.h (added by commit 06be6368da16104be5) is not really the best options for newer ports. It requires define some misleading flags that should be always defined as 0 (__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it exposes options used solely for linuxthreads compat mode (__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and requires newer ports to explicit define them (adding more boilerplate code). This patch adds a new default __pthread_mutex_s definition meant to be used by newer ports. Its layout mimics the current usage on both 32 and 64 bits ports and it allows most ports to use the generic definition. Only ports that use some arch-specific definition (such as hardware lock-elision or linuxthreads compat) requires specific headers. For 32 bit, the generic definitions mimic the other 32-bit ports of using an union to define the fields uses on adaptive and robust mutexes (thus not allowing both usage at same time) and by using a single linked-list for robust mutexes. Both decisions seemed to follow what recent ports have done and make the resulting pthread_mutex_t/mtx_t object smaller. Also the static intialization macro for pthread_mutex_t is set to use a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine in its struct_mutex.h if it requires additional fields to be initialized. Checked with a build on affected abis. Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
* nptl: Remove rwlock elision definitionsAdhemerval Zanella2019-11-261-2/+0
| | | | | | | | | | The new rwlock implementation added by cc25c8b4c1196 (2.25) removed support for lock-elision. This patch removes remaining the arch-specific unused definitions. Checked with a build against all affected ABIs. Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
* nptl: Add tests for internal pthread_rwlock_t offsetsAdhemerval Zanella2019-11-261-0/+6
| | | | | | | | | | | | | This patch new build tests to check for internal fields offsets for internal pthread_rwlock_t definition. Althoug the '__data.__flags' field layout should be preserved due static initializators, the patch also adds tests for the futexes that may be used in a shared memory (although using different libc version in such scenario is not really supported). Checked with a build against all affected ABIs. Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
* nptl: Cleanup mutex internal offset testsAdhemerval Zanella2019-11-261-8/+0
| | | | | | | | | | | | | The offsets of pthread_mutex_t __data.__nusers, __data.__spins, __data.elision, __data.list are not required to be constant over the releases. Only the __data.__kind is used for static initializers. This patch also adds an additional size check for __data.__kind. Checked with a build against affected ABIs. Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
* S390: Fp comparison are now raising FE_INVALID with gcc 10.Stefan Liebler2019-11-061-5/+7
| | | | | | | The s390 gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77918 "S390: Floating point comparisons don't raise invalid for unordered operands." is fixed with gcc 10. Thus we conditionally set FIX_COMPARE_INVALID to 0 or 1.
* S390: Add new s390 platform z15.Stefan Liebler2019-10-182-3/+3
| | | | | The new IBM z15 is added to platform string array. The macro _DL_PLATFORMS_COUNT is incremented.
* Split up endian.h to minimize exposure of BYTE_ORDER.Alistair Francis2019-10-012-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With only two exceptions (sys/types.h and sys/param.h, both of which historically might have defined BYTE_ORDER) the public headers that include <endian.h> only want to be able to test __BYTE_ORDER against __*_ENDIAN. This patch creates a new bits/endian.h that can be included by any header that wants to be able to test __BYTE_ORDER and/or __FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs __LONG_LONG_PAIR. It only defines macros in the implementation namespace. The existing bits/endian.h (which could not be included independently of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER) is renamed to bits/endianness.h. I also took the opportunity to canonicalize the form of this header, which we are stuck with having one copy of per architecture. Since they are so short, this means git doesn’t understand that they were renamed from existing headers, sigh. endian.h itself is a nonstandard header and its only remaining use from a standard header is guarded by __USE_MISC, so I dropped the __USE_MISC conditionals from around all of the public-namespace things it defines. (This means, an application that requests strict library conformance but includes endian.h will still see the definition of BYTE_ORDER.) A few changes to specific bits/endian(ness).h variants deserve mention: - sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did have selectable endianness, but we have assembly code in sysdeps/ia64 that assumes it’s little-endian, so there is no reason to treat the ia64 endianness.h as linux-specific. - The C-SKY port does not fully support big-endian mode, the compile will error out if __CSKYBE__ is defined. - The PowerPC port had extra logic in its bits/endian.h to detect a broken compiler, which strikes me as unnecessary, so I removed it. - The only files that defined __FLOAT_WORD_ORDER always defined it to the same value as __BYTE_ORDER, so I removed those definitions. The SH bits/endian(ness).h had comments inconsistent with the actual setting of __FLOAT_WORD_ORDER, which I also removed. - I *removed* copyright boilerplate from the few bits/endian(ness).h headers that had it; these files record a single fact in a fashion dictated by an external spec, so I do not think they are copyrightable. As long as I was changing every copy of ieee754.h in the tree, I noticed that only the MIPS variant includes float.h, because it uses LDBL_MANT_DIG to decide among three different versions of ieee854_long_double. This patch makes it not include float.h when GCC’s intrinsic __LDBL_MANT_DIG__ is available. * string/endian.h: Unconditionally define LITTLE_ENDIAN, BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping macros only on !__ASSEMBLER__. Move the definitions of __BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER, and __LONG_LONG_PAIR to... * string/bits/endian.h: ...this new file, which includes the renamed header bits/endianness.h for the definition of __BYTE_ORDER and possibly __FLOAT_WORD_ORDER. * string/Makefile: Install bits/endianness.h. * include/bits/endian.h: New wrapper. * bits/endian.h: Rename to bits/endianness.h. Add multiple-include guard. Rewrite the comment explaining what the machine-specific variants of this file should do. * sysdeps/unix/sysv/linux/ia64/bits/endian.h: Move to sysdeps/ia64. * sysdeps/aarch64/bits/endian.h * sysdeps/alpha/bits/endian.h * sysdeps/arm/bits/endian.h * sysdeps/csky/bits/endian.h * sysdeps/hppa/bits/endian.h * sysdeps/ia64/bits/endian.h * sysdeps/m68k/bits/endian.h * sysdeps/microblaze/bits/endian.h * sysdeps/mips/bits/endian.h * sysdeps/nios2/bits/endian.h * sysdeps/powerpc/bits/endian.h * sysdeps/riscv/bits/endian.h * sysdeps/s390/bits/endian.h * sysdeps/sh/bits/endian.h * sysdeps/sparc/bits/endian.h * sysdeps/x86/bits/endian.h: Rename to endianness.h; canonicalize form of file; remove redundant definitions of __FLOAT_WORD_ORDER. * sysdeps/powerpc/bits/endianness.h: Remove logic to check for broken compilers. * ctype/ctype.h * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h * sysdeps/arm/nptl/bits/pthreadtypes-arch.h * sysdeps/csky/nptl/bits/pthreadtypes-arch.h * sysdeps/ia64/ieee754.h * sysdeps/ieee754/ieee754.h * sysdeps/ieee754/ldbl-128/ieee754.h * sysdeps/ieee754/ldbl-128ibm/ieee754.h * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h * sysdeps/mips/ieee754/ieee754.h * sysdeps/mips/nptl/bits/pthreadtypes-arch.h * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h * sysdeps/nptl/pthread.h * sysdeps/riscv/nptl/bits/pthreadtypes-arch.h * sysdeps/sh/nptl/bits/pthreadtypes-arch.h * sysdeps/sparc/sparc32/ieee754.h * sysdeps/unix/sysv/linux/generic/bits/stat.h * sysdeps/unix/sysv/linux/generic/bits/statfs.h * sysdeps/unix/sysv/linux/sys/acct.h * wctype/bits/wctype-wchar.h: Include bits/endian.h, not endian.h. * sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h. * sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__ in ifdefs, instead of LDBL_MANT_DIG. Only include float.h when __LDBL_MANT_DIG__ is not predefined, in which case define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
* S390: Use _HP_TIMING_S390_H instead of _HP_TIMING_H.Stefan Liebler2019-09-191-2/+2
| | | | | | | | | | Use macro _HP_TIMING_S390_H instead of _HP_TIMING_H in s390 specific hp-timing.h ChangeLog: * sysdeps/s390/hp-timing.h (_HP_TIMING_H): Undefine. (_HP_TIMING_S390_H): Define.
* S390: Add support for HP_TIMING_NOW.Stefan Liebler2019-09-181-0/+42
| | | | | | | | | | This patch adds support for HP_TIMING_NOW if we build at least with -march=z10 -mzarch. Otherwise we are still using the generic hp-timing.h. ChangeLog: * sysdeps/s390/hp-timing.h: New file.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07289-289/+289
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-27 19:56:59 +0000