summary refs log tree commit diff
path: root/sysdeps/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-01796-796/+796
|
* powerpc: Fix powerpc32/power7 memchr for large input sizesTulio Magno Quites Machado Filho2016-12-281-1/+10
| | | | | | | | | The same error fixed in commit b224637928e9fc04e3cef3e10d02ccf042d01584 happens in the 32-bit implementation of memchr for power7. This patch adopts the same solution, with a minimal change: it implements a saturated addition where overflows sets the maximum pointer size to UINTPTR_MAX.
* powerpc64: strchr/strchrnul optimization for power8Rajalakshmi Srinivasaraghavan2016-12-288-2/+483
| | | | | | | The P7 code is used for <=32B strings and for > 32B vectorized loops are used. This shows as an average 25% improvement depending on the position of search character. The performance is same for shorter strings. Tested on ppc64 and ppc64le.
* powerpc: Remove f{max,min}{f} assembly implementationsAdhemerval Zanella2016-12-278-176/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the powerpc assembly implementation of fmax/fmin. Based on benchtests, the assembly ones shows: $ ./testrun.sh benchtests/bench-fmax "fmax": { "": { "duration": 5.07586e+09, "iterations": 2.01676e+09, "max": 1350.39, "min": 2.073, "mean": 2.51684 }, "qNaN": { "duration": 5.09315e+09, "iterations": 8.4568e+08, "max": 2788, "min": 5.806, "mean": 6.02255 }, "sNaN": { "duration": 5.09073e+09, "iterations": 8.42316e+08, "max": 4215.84, "min": 5.737, "mean": 6.04373 } And $ ./testrun.sh benchtests/bench-fmin "fmin": { "": { "duration": 5.07711e+09, "iterations": 2.02982e+09, "max": 497.094, "min": 2.073, "mean": 2.50126 }, "qNaN": { "duration": 5.09134e+09, "iterations": 8.46968e+08, "max": 2255.14, "min": 5.807, "mean": 6.01125 }, "sNaN": { "duration": 5.09122e+09, "iterations": 8.4746e+08, "max": 1969.38, "min": 5.729, "mean": 6.00763 } } The default implementation (math/s_f{max.min}_template.c) shows slight better latency for all cases: $ ./testrun.sh benchtests/bench-fmax "fmax": { "": { "duration": 5.07044e+09, "iterations": 2.38695e+09, "max": 2048.58, "min": 2.073, "mean": 2.12423 }, "qNaN": { "duration": 5.09004e+09, "iterations": 9.45428e+08, "max": 3306.93, "min": 5.138, "mean": 5.38385 }, "sNaN": { "duration": 5.08458e+09, "iterations": 1.15959e+09, "max": 972.008, "min": 3.321, "mean": 4.3848 } } And: $ ./testrun.sh benchtests/bench-fmin "fmin": { "": { "duration": 5.06817e+09, "iterations": 2.3913e+09, "max": 1177.9, "min": 2.073, "mean": 2.11942 }, "qNaN": { "duration": 5.08857e+09, "iterations": 9.45656e+08, "max": 2658.83, "min": 5.09, "mean": 5.38099 }, "sNaN": { "duration": 5.08093e+09, "iterations": 1.16725e+09, "max": 1030.74, "min": 3.323, "mean": 4.3529 } } Both were run with GCC 5.4 (ubuntu 16 default installation) using default compiler flags on POWER8E 3.4GHz (powerpc64le-linux-gnu).
* Do not stack-protect ifunc resolvers [BZ #7065]Nick Alcock2016-12-261-0/+2
| | | | | | | | | | | When dynamically linking, ifunc resolvers are called before TLS is initialized, so they cannot be safely stack-protected. We avoid disabling stack-protection on large numbers of files by using __attribute__ ((__optimize__ ("-fno-stack-protector"))) to turn it off just for the resolvers themselves. (We provide the attribute even when statically linking, because we will later use it elsewhere too.)
* Fix powerpc64/power7 memchr for large input sizesAdhemerval Zanella2016-12-161-1/+11
| | | | | | | | | | | | | | | | | | | | | | | Current optimized powercp64/power7 memchr uses a strategy to check for p versus align(p+n) (where 'p' is the input char pointer and n the maximum size to check for the byte) without taking care for possible overflow on the pointer addition in case of large 'n'. It was triggered by 3038145ca23 where default rawmemchr (used to created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1) on its implementation. This patch fixes it by implement a satured addition where overflows sets the maximum pointer size to UINTPTR_MAX. Checked on powerpc64le-linux-gnu. [BZ# 20971] * sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid overflow in pointer addition. * string/test-memchr.c (do_test): Add an argument to pass as the size on memchr. (test_main): Add check for SIZE_MAX.
* Fix powerpc fmax, fmin sNaN handling (bug 20947).Joseph Myers2016-12-152-2/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Various fmax and fmin function implementations mishandle sNaN arguments: (a) When both arguments are NaNs, the return value should be a qNaN, but sometimes it is an sNaN if at least one argument is an sNaN. (b) Under TS 18661-1 semantics, if either argument is an sNaN then the result should be a qNaN (whereas if one argument is a qNaN and the other is not a NaN, the result should be the non-NaN argument). Various implementations treat sNaNs like qNaNs here. This patch fixes the powerpc versions of these functions (shared by float and double, 32-bit and 64-bit). The structure of those versions is that all ordered cases are already handled before anything dealing with the case where the arguments are unordered; thus, this patch causes no change to the code executed in the common case (neither argument a NaN). Tested for powerpc (32-bit and 64-bit), together with tests to be added along with the x86_64 / x86 fixes. [BZ #20947] * sysdeps/powerpc/fpu/s_fmax.S (__fmax): Add the arguments when either is a signaling NaN. * sysdeps/powerpc/fpu/s_fmin.S (__fmin): Likewise.
* Refactor long double information into bits/long-double.h.Joseph Myers2016-12-141-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Information about whether the ABI of long double is the same as that of double is split between bits/mathdef.h and bits/wordsize.h. When the ABIs are the same, bits/mathdef.h defines __NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc binary supports both -mlong-double-64 and -mlong-double-128, bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with __NO_LONG_DOUBLE_MATH if this particular compilation is with -mlong-double-64. As part of the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this patch puts all that information in a single header, bits/long-double.h. It is included from sys/cdefs.h alongside the include of bits/wordsize.h, so other headers generally do not need to include bits/long-double.h directly. Previously, various bits/mathdef.h headers and bits/wordsize.h headers had this long double information (including implicitly in some bits/mathdef.h headers through not having the defines present in the default version). After the patch, it's all in six bits/long-double.h headers. Furthermore, most of those new headers are not architecture-specific. Architectures with optional long double all use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128, ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header for the case where long double = double, and headers in ldbl-128, ldbl-96 and ldbl-opt, suffices to cover every architecture except for cases where long double properties vary between different ABIs sharing a set of installed headers; fortunately all the ldbl-opt cases share a single compiler-predefined macro __LONG_DOUBLE_128__ that can be used to tell whether this compilation is -mlong-double-64 or -mlong-double-128. The two cases where a set of headers is shared between ABIs with different long double properties, MIPS (o32 has long double = double, other ABIs use ldbl-128) and SPARC (32-bit has optional long double, 64-bit has required long double), need their own bits/long-double.h headers. As with bits/wordsize.h, multiple-include protection for this header is generally implicit through the include guards on sys/cdefs.h, and multiple inclusion is harmless in any case. There is one subtlety: the header must not define __LONG_DOUBLE_MATH_OPTIONAL if __NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines __NO_LONG_DOUBLE_MATH itself before including system headers. Subject to keeping that working, it would be reasonable to move these macros from defined/undefined #ifdef to always-defined 1/0 #if semantics, but this patch does not attempt to do so, just rearranges where the macros are defined. After this patch, the only use of bits/mathdef.h is the alpha one for modifying complex function ABIs for old GCC. Thus, all versions of the header other than the default and alpha versions are removed, as is the include from math.h. Tested for x86_64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/long-double.h: New file. * sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise. * sysdeps/mips/bits/long-double.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise. * math/Makefile (headers): Add bits/long-double.h. * misc/sys/cdefs.h: Include <bits/long-double.h>. * stdlib/strtold.c: Include <bits/long-double.h> instead of <bits/wordsize.h>. * bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. [!__NO_LONG_DOUBLE_MATH]: Remove conditional code. * math/math.h: Do not include <bits/mathdef.h>. * sysdeps/aarch64/bits/mathdef.h: Remove file. * sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. * sysdeps/ia64/bits/mathdef.h: Remove file. * sysdeps/m68k/m680x0/bits/mathdef.h: Likewise. * sysdeps/mips/bits/mathdef.h: Likewise. * sysdeps/powerpc/bits/mathdef.h: Likewise. * sysdeps/s390/bits/mathdef.h: Likewise. * sysdeps/sparc/bits/mathdef.h: Likewise. * sysdeps/x86/bits/mathdef.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove conditional code. * sysdeps/s390/s390-64/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise.
* powerpc: remove _dl_platform_string and _dl_powerpc_platformsAndreas Schwab2016-12-132-62/+11
|
* powerpc: strncmp optimization for power9Rajalakshmi Srinivasaraghavan2016-12-135-1/+422
| | | | | | | Vectorized loops are used for strings > 32B when compared to power8 optimization. Tested on power9 ppc64le simulator.
* Fix hypot sNaN handling (bug 20940).Joseph Myers2016-12-072-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 generally defines libm functions taking sNaN arguments to return qNaN and raise "invalid", even for the cases where a corresponding qNaN argument would not result in a qNaN return. This includes hypot with one argument being an infinity and the other being an sNaN. This patch duly fixes hypot implementatations in glibc (generic and powerpc) to ensure qNaN, computed by arithmetic on the arguments, is returned in that case. Various implementations do their checks for infinities and NaNs inline by manipulating the representations of the arguments. For simplicity, this patch just uses issignaling to check for sNaN arguments. This could be inlined like the existing code (with due care about reversed quiet NaN conventions, for implementations where that is relevant), but given that all these checks are in cases where it's already known at least one argument is not finite, which should be the uncommon case, that doesn't seem worthwhile unless performance issues are observed in practice. Tested for x86_64, x86, mips64 and powerpc. [BZ #20940] * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not return Inf for arguments Inf and sNaN. * sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf for arguments Inf and sNaN. When returning a NaN, compute it by arithmetic on the arguments. * sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise. * math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
* powerpc: Remove stpcpy internal clash with IFUNCAdhemerval Zanella2016-12-011-3/+3
| | | | | | | | | | | | | | | | | | | | | Commit c7debbdfacb redirected the internal strrch to default powerpc64 implementation by redefining the weak_alias at sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.c: #undef weak_alias #define weak_alias(name, aliasname) \ extern __typeof (__strrchr_ppc) aliasname \ __attribute__ ((weak, alias ("__strrchr_ppc"))); This creates a __GI_strchr alias that clashes with the IFUNC symbol in stprchr.os. There is not need to define the default version for internal version, since ifunc should work internally for powerpc64. This patch removes the weak_alias indirection. Checked on powerpc64le. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c (weak_alias): Remove redirection to __strrchr_ppc.
* powerpc: strcmp optimization for power9Rajalakshmi Srinivasaraghavan2016-12-015-1/+326
| | | | | | | Vectorized loops are used for strings > 32B when compared to power8 optimization. Tested on power9 ppc64le simulator.
* Refactor FP_ILOGB* out of bits/mathdef.h.Joseph Myers2016-12-011-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch stops it defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to a new header bits/fp-logb.h. There are only two possible values of each of those macros permitted by ISO C. TS 18661-1 adds corresponding macros for llogb, and their values are required to correspond to those of the ilogb macros in the obvious way. Thus two boolean values - for which the same choices are correct for most architectures - suffice to determine the value of all these macros, and by defining macros for those boolean values in bits/fp-logb.h we can then define the public FP_* macros in math.h and avoid the present duplication of the associated feature test macro logic. This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and __FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct for both architectures, while ia64, m68k and x86 get their own versions of bits/fp-logb.h to reflect their use of values different from the defaults. The patch renders many copies of bits/mathdef.h trivial (needed only to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise <https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html> accordingly so that it removes all bits/mathdef.h headers except the default one and the alpha one, and arranges for the header to be included only by complex.h as the only remaining use at that point will be for the alpha ABI issues there. Tested for x86_64 and x86. Also did compile-only testing with build-many-glibcs.py (using glibc sources from before the commit that introduced many build failures with undefined __GI___sigsetjmp). * bits/fp-logb.h: New file. * sysdeps/ia64/bits/fp-logb.h: Likewise. * sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise. * sysdeps/x86/bits/fp-logb.h: Likewise. * math/Makefile (headers): Add bits/fp-logb.h. * math/math.h: Include <bits/fp-logb.h>. [__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN. [__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN. * bits/mathdef.h (FP_ILOGB0): Remove. (FP_ILOGBNAN): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise.
* powerpc: Remove stpcpy internal clash with IFUNCAdhemerval Zanella2016-11-301-3/+1
| | | | | | | | | | | | | | | | | | | | | Commit 142e0a99530 redirected the internal stpcpy to default powerpc64 implementation by redefining the weak_alias at sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: #undef weak_alias #define weak_alias(name, aliasname) \ extern __typeof (__stpcpy_ppc) aliasname \ __attribute__ ((weak, alias ("__stpcpy_ppc"))); This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in stpcpy.os. There is not need to define the default version for internal version, since ifunc should work internally for powerpc64. This patch removes the weak_alias indirection. Checked on powerpc64le. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias): Remove redirection to __stpcpy_ppc.
* powerpc: Add hidden definition for __sigsetjmpFlorian Weimer2016-11-293-0/+13
| | | | | There already is a hidden prototype for __sigsetjmp, but the architecture-specific definition was missing.
* powerpc: Remove unintended __longjmp symbol from ABIFlorian Weimer2016-11-291-3/+1
| | | | | | | | The __longjmp symbol was left in accidentally. It is not exported through a Versions file, but through a .symver assembler directive. The corresponding exported symbol was removed from the non-fpu powerpc64 targets in commit 9b9ef823581ecee546653d6ac3fd335f7b79faca.
* Refactor FP_FAST_* into bits/fp-fast.h.Joseph Myers2016-11-292-6/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch moves the FP_FAST_* definitions into a new bits/fp-fast.h header. Currently this is only for FP_FAST_FMA*, but in future it would be the appropriate place for the FP_FAST_* macros from TS 18661-1 as well. The generic bits/mathdef.h header defines these macros based on whether the compiler defines __FP_FAST_*. Most architecture-specific headers, however, fail to do so, meaning that if the architecture (or some particular processors) does in fact have fused operations, and GCC knows to use them inline, the FP_FAST_* macros will still not be defined. By refactoring, this patch causes the generic version (based on __FP_FAST_*) to be used in more cases, and so the macro definitions to be more accurate. Architectures that already defined some or all of these macros other than based on the predefines have their own versions of fp-fast.h, which are arranged so they define FP_FAST_* if either the architecture-specific conditions are true or __FP_FAST_* are defined. After this refactoring, various bits/mathdef.h headers for architectures with long double = double are semantically identical to the generic version. The patch removes those headers that are redundant. (In fact two of the four removed were already redundant before this patch because they did use __FP_FAST_*.) Tested for x86_64 and x86, and compilation-only with build-many-glibcs.py. * bits/fp-fast.h: New file. * sysdeps/aarch64/bits/fp-fast.h: Likewise. * sysdeps/powerpc/bits/fp-fast.h: Likewise. * math/Makefile (headers): Add bits/fp-fast.h. * math/math.h: Include <bits/fp-fast.h>. * bits/mathdef.h (FP_FAST_FMA): Remove. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/arm/bits/mathdef.h: Remove file. * sysdeps/hppa/fpu/bits/mathdef.h: Likewise. * sysdeps/sh/sh4/bits/mathdef.h: Likewise. * sysdeps/tile/bits/mathdef.h: Likewise.
* Remove cached PID/TID in cloneAdhemerval Zanella2016-11-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
* Refactor float_t, double_t information into bits/flt-eval-method.h.Joseph Myers2016-11-241-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present, definitions of float_t and double_t are split among many bits/mathdef.h headers. For all but three architectures, these types are float and double. Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that provides a more generic way of determining the correct values of these typedefs. Defining these typedefs more generally based on __FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in <https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>. This patch refactors things in the way I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new header bits/flt-eval-method.h defines a single macro, __GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define float_t and double_t. The default is based on __FLT_EVAL_METHOD__ (although actually a default to 0 would have the same effect for current ports, because ports where values other than 0 or 16 are possible all have their own headers). To avoid changing the existing semantics in any case, including for compilers not defining __FLT_EVAL_METHOD__, architecture-specific files are then added for m68k, s390, x86 which replicate the existing semantics. At least with __FLT_EVAL_METHOD__ values possible with GCC, there should be no change to the choices of float_t and double_t for any supported configuration. Architecture maintainer notes: * m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It might make sense to make the header prefer to base things on __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make the choices of these types more accurate (with a NEWS entry as for the other changes to these types on particular architectures). * s390: sysdeps/s390/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As previously discussed, it might make sense in coordination with GCC to eliminate the historic mistake, avoid excess precision in the -fexcess-precision=standard case and make the typedefs match (with a NEWS entry, again). Tested for x86-64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/flt-eval-method.h: New file. * sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise. * sysdeps/s390/bits/flt-eval-method.h: Likewise. * sysdeps/x86/bits/flt-eval-method.h: Likewise. * math/Makefile (headers): Add bits/flt-eval-method.h. * math/math.h: Include <bits/flt-eval-method.h>. [__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD. [__USE_ISOC99] (double_t): Likewise. * bits/mathdef.h (float_t): Remove. (double_t): Likewise. * sysdeps/aarch64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/alpha/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/arm/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/ia64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/mips/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/powerpc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/s390/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sparc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/tile/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/x86/bits/mathdef.h (float_t): Likewise. (double_t): Likewise.
* Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).Joseph Myers2016-11-042-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
* Define wordsize.h macros everywhereSteve Ellcey2016-11-042-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * bits/wordsize.h: Add documentation. * sysdeps/aarch64/bits/wordsize.h : New file * sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update definitions. (SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check. * sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check with #if instead of #ifdef. * sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto. * sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG, __WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32): Add or change defines. * sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise. * sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h: Likewise. * sysdeps/s390/s390-64/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc32/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc64/bits/wordsize.h: Likewise. * sysdeps/tile/tilegx/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise. * sysdeps/wordsize-32/bits/wordsize.h: Likewise. * sysdeps/wordsize-64/bits/wordsize.h: Likewise. * sysdeps/x86/bits/wordsize.h: Likewise.
* Document a behavior of an elided pthread_rwlock_unlockTulio Magno Quites Machado Filho2016-10-281-0/+3
| | | | | Explain that pthread_rwlock_unlock may crash if called on a lock not held by the current thread.
* Fix cmpli usage in power6 memset.Joseph Myers2016-10-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Building glibc for powerpc64 with recent (2.27.51.20161012) binutils, with multi-arch enabled, I get the error: ../sysdeps/powerpc/powerpc64/power6/memset.S: Assembler messages: ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (5 is not between 0 and 1) ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (128 is not between 0 and 31) ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: missing operand Indeed, cmpli is documented as a four-operand instruction, and looking at nearby code it seems likely cmpldi was intended. This patch fixes this powerpc64 code accordingly, and makes a corresponding change to the powerpc32 code. Tested for powerpc, powerpc64 and powerpc64le by Tulio Magno Quites Machado Filho * sysdeps/powerpc/powerpc32/power6/memset.S (memset): Use cmplwi instead of cmpli. * sysdeps/powerpc/powerpc64/power6/memset.S (memset): Use cmpldi instead of cmpli.
* powerpc: Cleanup fenv_private.hPaul Murphy2016-10-211-103/+53
| | | | | | | | | | | | | | | | | | | | | | | | Some of the masks are wrong, and the naming is confusing. There are two basic cases we really care about: 1. Stacking a new rounding mode when running certain sections of code, and pausing exception handling. 2. Likewise, but discarding any exceptions which occur while running under the new rounding mode. libc_feholdexcept_setround_ppc_ctx has been removed as it basically does the same thing as libc_feholdsetround_ppc_ctx but also clearing any sticky bits. The restore behavior is what differentiates these two cases as the SET_RESTORE_ROUND{,_NOEX} macros will either merge or discard all exceptions occurring during scope of their usage. Likewise, there are a number of routines to swap, replace, or merge FP environments. This change reduces much of the common and sometimes wrong code. Tested on ppc64le, with results before and after.
* Stop powerpc copysignl raising "invalid" for sNaN argument (bug 20718).Joseph Myers2016-10-192-9/+24
| | | | | | | | | | | | | | | | | | | | | | The powerpc (hard-float) implementations of copysignl, both 32-bit and 64-bit, raise spurious "invalid" exceptions when the first argument is a signaling NaN. copysign functions should never raise exceptions even for signaling NaNs. The problem is the use of an fcmpu instruction to test the sign of the high part of the long double argument. This patch fixes the functions to use fsel instead (as used for fabsl following my fixes for a similar bug there), or to examine the integer representation for older 32-bit processors without fsel. Tested for powerpc64 and powerpc32 (configurations with and without fsel used). [BZ #20718] * sysdeps/powerpc/powerpc32/fpu/s_copysignl.S (__copysignl): Do not use floating-point comparisons to test sign. * sysdeps/powerpc/powerpc64/fpu/s_copysignl.S (__copysignl): Likewise.
* powerpc32: make PLT call in _mcount compatible with -msecure-plt (bug 20554)Alan Modra2016-10-091-3/+24
|
* Use gcc attribute ifunc in libc_ifunc macro instead of inline assembly due ↵Stefan Liebler2016-10-0737-222/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to false debuginfo. The current s390 ifunc resolver for vector optimized functions and the common libc_ifunc macro in include/libc-symbols.h uses something like that to generate ifunc'ed functions: extern void *__resolve___strlen(unsigned long int dl_hwcap) asm (strlen); asm (".type strlen, %gnu_indirect_function"); This leads to false debug information: objdump --dwarf=info libc.so: ... <1><1e6424>: Abbrev Number: 43 (DW_TAG_subprogram) <1e6425> DW_AT_external : 1 <1e6425> DW_AT_name : (indirect string, offset: 0x1146e): __resolve___strlen <1e6429> DW_AT_decl_file : 1 <1e642a> DW_AT_decl_line : 23 <1e642b> DW_AT_linkage_name: (indirect string, offset: 0x1147a): strlen <1e642f> DW_AT_prototyped : 1 <1e642f> DW_AT_type : <0x1e4ccd> <1e6433> DW_AT_low_pc : 0x998e0 <1e643b> DW_AT_high_pc : 0x16 <1e6443> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <1e6445> DW_AT_GNU_all_call_sites: 1 <1e6445> DW_AT_sibling : <0x1e6459> <2><1e6449>: Abbrev Number: 44 (DW_TAG_formal_parameter) <1e644a> DW_AT_name : (indirect string, offset: 0x1845): dl_hwcap <1e644e> DW_AT_decl_file : 1 <1e644f> DW_AT_decl_line : 23 <1e6450> DW_AT_type : <0x1e4c8d> <1e6454> DW_AT_location : 0x122115 (location list) ... The debuginfo for the ifunc-resolver function contains the DW_AT_linkage_name field, which names the real function name "strlen". If you perform an inferior function call to strlen in lldb, then it fails due to something like that: "error: no matching function for call to 'strlen' candidate function not viable: no known conversion from 'const char [6]' to 'unsigned long' for 1st argument" The unsigned long is the dl_hwcap argument of the resolver function. The strlen function itself has no debufinfo. The s390 ifunc resolver for memset & co uses something like that: asm (".globl FUNC" ".type FUNC, @gnu_indirect_function" ".set FUNC, __resolve_FUNC"); This way the debuginfo for the ifunc-resolver function does not conain the DW_AT_linkage_name field and the real function has no debuginfo, too. Using this strategy for the vector optimized functions leads to some troubles for functions like strnlen. Here we have __strnlen and a weak alias strnlen. The __strnlen function is the ifunc function, which is realized with the asm- statement above. The weak_alias-macro can't be used here due to undefined symbol: gcc ../sysdeps/s390/multiarch/strnlen.c -c ... In file included from <command-line>:0:0: ../sysdeps/s390/multiarch/strnlen.c:28:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’ weak_alias (__strnlen, strnlen) ^ ./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’ extern __typeof (name) aliasname __attribute__ ((weak, alias (#name))); ^ ../sysdeps/s390/multiarch/strnlen.c:28:1: note: in expansion of macro ‘weak_alias’ weak_alias (__strnlen, strnlen) ^ make[2]: *** [build/string/strnlen.o] Error 1 As the __strnlen function is defined with asm-statements the function name __strnlen isn't known by gcc. But the weak alias can also be done with an asm statement to resolve this issue: __asm__ (".weak strnlen\n\t" ".set strnlen,__strnlen\n"); In order to use the weak_alias macro, gcc needs to know the ifunc function. The minimum gcc to build glibc is currently 4.7, which supports attribute((ifunc)). See https://gcc.gnu.org/onlinedocs/gcc-4.7.0/gcc/Function-Attributes.html. It is only supported if gcc is configured with --enable-gnu-indirect-function or gcc supports it by default for at least intel and s390x architecture. This patch uses the old behaviour if gcc support is not available. Usage of attribute ifunc is something like that: __typeof (FUNC) FUNC __attribute__ ((ifunc ("__resolve_FUNC"))); Then gcc produces the same .globl, .type, .set assembler instructions like above. And the debuginfo does not contain the DW_AT_linkage_name field and there is no debuginfo for the real function, too. But in order to get it work, there is also some extra work to do. Currently, the glibc internal symbol on s390x e.g. __GI___strnlen is not the ifunc symbol, but the fallback __strnlen_c symbol. Thus I have to omit the libc_hidden_def macro in strnlen.c (here is the ifunc function __strnlen) because it is already handled in strnlen-c.c (here is __strnlen_c). Due to libc_hidden_proto (__strnlen) in string.h, compiling fails: gcc ../sysdeps/s390/multiarch/strnlen.c -c ... In file included from <command-line>:0:0: ../sysdeps/s390/multiarch/strnlen.c:53:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’ weak_alias (__strnlen, strnlen) ^ ./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’ extern __typeof (name) aliasname __attribute__ ((weak, alias (#name))); ^ ../sysdeps/s390/multiarch/strnlen.c:53:1: note: in expansion of macro ‘weak_alias’ weak_alias (__strnlen, strnlen) ^ make[2]: *** [build/string/strnlen.os] Error 1 I have to redirect the prototypes for __strnlen in string.h and create a copy of the prototype for using as ifunc function: __typeof (__redirect___strnlen) __strnlen __attribute__ ((ifunc ("__resolve_strnlen"))); weak_alias (__strnlen, strnlen) This way there is no trouble with the internal __GI_* symbols. Glibc builds fine with this construct and the debuginfo is "correct". For functions without a __GI_* symbol like memccpy this redirection is not needed. This patch adjusts the common libc_ifunc and libm_ifunc macro to use gcc attribute ifunc. Due to this change, the macro users where the __GI_* symbol does not target the ifunc symbol have to be prepared with the redirection construct. Furthermore a configure check to test gcc support is added. If it is not supported, the old behaviour is used. This patch also prepares the libc_ifunc macro to be useable in s390-ifunc-macro. The s390 ifunc-resolver-functions do have an hwcaps parameter and not all resolvers need the same initialization code. The next patch in this series changes the s390 ifunc macros to use this common one. ChangeLog: * include/libc-symbols.h (__ifunc_resolver): New macro is used by __ifunc* macros. (__ifunc): New macro uses gcc attribute ifunc or inline assembly depending on HAVE_GCC_IFUNC. (libc_ifunc, libm_ifunc): Use __ifunc as base macro. (libc_ifunc_redirected, libc_ifunc_hidden, libm_ifunc_init): New macro. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Redirect ifunced function in header for using as type for ifunc function. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strstr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Add libc_hidden_def() and use libc_ifunc_hidden() macro instead of libc_ifunc() macro. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise.
* Add iseqsig.Joseph Myers2016-10-061-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* powerpc: Regenerate ULPsTulio Magno Quites Machado Filho2016-10-051-55/+55
| | | | * sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* powerpc: Installed-header hygieneTulio Magno Quites Machado Filho2016-10-041-9/+9
| | | | | | | | Fix powerpc-specific headers: - Make it compatible to C89 by replace references to inline by __inline__. - Get the definition of sigset_t used by sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h. - Includes missing header file.
* powerpc: Fix POWER9 impliesTulio Magno Quites Machado Filho2016-09-192-2/+1
| | | | | Fix multiarch build for POWER9 by correcting the order of the directories listed at sysnames configure variable.
* Add e500 version of fetestexceptflag.Joseph Myers2016-09-071-0/+25
| | | | | | | | | | | | | | | When I added fetestexceptflag, I missed that e500 was another case that needed its own version because saved exceptions were not directly stored in a form that could be ANDed with exception bits (they were stored with exceptions in SPE form, but the FE_* macros always use the classic hard-float form). This patch adds an e500 version with the required call to __fexcepts_from_spe to convert from one form to the other. Tested for e500. * sysdeps/powerpc/powerpc32/e500/nofpu/fetestexceptflag.c: New file.
* Add femode_t functions: powerpc.Joseph Myers2016-09-076-0/+222
| | | | | | | | | | | This patch adds PowerPC versions of fegetmode and fesetmode. * sysdeps/powerpc/fpu/fegetmode.c: New file. * sysdeps/powerpc/fpu/fesetmode.c: Likewise. * sysdeps/powerpc/nofpu/fegetmode.c: Likewise. * sysdeps/powerpc/nofpu/fesetmode.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fegetmode.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fesetmode.c: Likewise.
* Add femode_t functions.Joseph Myers2016-09-075-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add fesetexcept: powerpc.Joseph Myers2016-08-163-0/+107
| | | | | | | | This patch adds PowerPC versions of fesetexcept. * sysdeps/powerpc/fpu/fesetexcept.c: New file. * sysdeps/powerpc/nofpu/fesetexcept.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fesetexcept.c: Likewise.
* Add comment from sysdeps/powerpc/fpu/fraiseexcpt.c to fsetexcptflg.c.Joseph Myers2016-08-121-0/+1
| | | | | * sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Add comment from fraiseexcpt.c.
* Fix powerpc fesetexceptflag clearing FE_INVALID (bug 20455).Joseph Myers2016-08-101-1/+4
| | | | | | | | | | | | | | | | As shown by the test math/test-fexcept, the powerpc fesetexceptflag implementation fails to clear a previously set FE_INVALID flag, when that flag is clear in the saved exceptions and FE_INVALID is included in the mask of flags to restore, because it fails to mask out the sub-exceptions of FE_INVALID from the FPSCR state. This patch fixes the masking logic accordingly. Tested for powerpc. [BZ #20455] * sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Mask out all FE_INVALID sub-exceptions from FPSCR when FE_INVALID specified to be restored.
* Add tests for fegetexceptflag, fesetexceptflag.Joseph Myers2016-08-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that there was no meaningful test coverage for fegetexceptflag and fesetexceptflag (one test ensures that calls to them compile and link, but nothing to verify they work correctly). This patch adds tests for these functions. fesetexceptflag is meant to set the relevant exception flag bits to the saved state without causing enabled traps to be taken. On some architectures, it is not possible to set exception flag bits without causing enabled traps to occur. Such architectures need to define EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in this patch for powerpc. x86 avoids needing to define this because the traps resulting from setting exception bits don't occur until the next floating-point operation or fwait instruction. Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for powerpc because of a pre-existing bug in fesetexceptflag for powerpc, which I'll fix separately. * math/test-fexcept-traps.c: New file. * math/test-fexcept.c: Likewise. * math/Makefile (tests): Add test-fexcept and test-fexcept-traps. * sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New macro. * sysdeps/powerpc/math-tests.h [!__NO_FPRS__] (EXCEPTION_SET_FORCES_TRAP): Likewise.
* powerpc: fix ifunc-sel.h fix asm constraints and clobber listAurelien Jarno2016-08-031-2/+4
| | | | | | | | | | | | | | | As pointer out on the mailing list, the inline assembly code in sysdeps/powerpc/ifunc-sel.h doesn't have a list of clobbered registers and used wrong constraints. This patch fixes that. I verified it doesn't introduce any change in the generated code. Changelog: * sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Add "11", "12", "cr0" to the clobber list. Use "i" constraint instead of "X". (ifunc_one): Add "12" to the clobber list. Use "i" constraint instead of "X".
* powerpc: fix ifunc-sel.h with GCC 6Aurelien Jarno2016-08-031-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 32-bit PowerPC GCC 6 always saves the PIC register on the stack in the prologue and adjust the stack in the epilogue. It is therefore not possible anymore to just exit the function in the inline asm code, otherwise it corrupts the stack pointer. This causes the following tests to fail when using GCC 6: FAIL: elf/ifuncmain1 FAIL: elf/ifuncmain1pic FAIL: elf/ifuncmain1picstatic FAIL: elf/ifuncmain1pie FAIL: elf/ifuncmain1staticpic FAIL: elf/ifuncmain1staticpie FAIL: elf/ifuncmain1vis FAIL: elf/ifuncmain1vispic FAIL: elf/ifuncmain1vispie FAIL: elf/ifuncmain2pic FAIL: elf/ifuncmain2picstatic FAIL: elf/ifuncmain3 FAIL: elf/ifuncmain4picstatic FAIL: elf/ifuncmain5 FAIL: elf/ifuncmain5picstatic FAIL: elf/ifuncmain5staticpic The solution is to replace the beqlr instructions by a beq to the end of the inline asm code. This fixes all the above failures. ChangeLog: * sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Replace beqlr instructions by beq instructions jumping to the end of the function.
* ppc: Fix modf (sNaN) for pre-POWER5+ CPU (bug 20240).Aurelien Jarno2016-07-082-0/+10
| | | | | | | | | | | | | | | | Commit a6a4395d fixed modf implementation by compiling s_modf.c and s_modff.c with -fsignaling-nans. However these files are also included from the pre-POWER5+ implementation, and thus these files should also be compiled with -fsignaling-nans. Changelog: [BZ #20240] * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (CFLAGS-s_modf-ppc32.c): New variable. (CFLAGS-s_modff-ppc32.c): Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (CFLAGS-s_modf-ppc64.c): Likewise. (CFLAGS-s_modff-ppc64.c): Likewise.
* powerpc: Fix return code of strcasecmp for unaligned inputsRajalakshmi Srinivasaraghavan2016-07-051-3/+14
| | | | | | | If the input values are unaligned and if there are null characters in the memory before the starting address of the input values, strcasecmp gives incorrect return code. Fixed it by adding mask the bits that are not part of the string.
* powerpc: Add a POWER8-optimized version of sinf()Anton Blanchard2016-06-305-1/+604
| | | | | This uses the implementation of sinf() in sysdeps/x86_64/fpu/s_sinf.S as inspiration.
* powerpc: Add a POWER8-optimized version of expf()Tulio Magno Quites Machado Filho2016-06-306-1/+388
| | | | | | | | This implementation is based on the one already used at sysdeps/x86_64/fpu/e_expf.S. This implementation improves the performance by ~14% on average in synthetic benchmarks at the cost of decreasing accuracy to 1 ULP.
* Remove atomic_compare_and_exchange_bool_rel.Torvald Riegel2016-06-243-58/+0
| | | | | | | | | | | | | | | | | | | | | | | | atomic_compare_and_exchange_bool_rel and catomic_compare_and_exchange_bool_rel are removed and replaced with the new C11-like atomic_compare_exchange_weak_release. The concurrent code in nscd/cache.c has not been reviewed yet, so this patch does not add detailed comments. * nscd/cache.c (cache_add): Use new C11-like atomic operation instead of atomic_compare_and_exchange_bool_rel. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * include/atomic.h (atomic_compare_and_exchange_bool_rel, catomic_compare_and_exchange_bool_rel): Remove. * sysdeps/aarch64/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/alpha/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/arm/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/mips/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/tile/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise.
* elf: Consolidate machine-agnostic DTV definitions in <dl-dtv.h>Florian Weimer2016-06-202-14/+1
| | | | | Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were repeated for all architectures using DTVs.
* Use generic fdim on more architectures (bug 6796, bug 20255, bug 20256).Joseph Myers2016-06-144-66/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some architectures have their own versions of fdim functions, which are missing errno setting (bug 6796) and may also return sNaN instead of qNaN for sNaN input, in the case of the x86 / x86_64 long double versions (bug 20256). These versions are not actually doing anything that a compiler couldn't generate, just straightforward comparisons / arithmetic (and, in the x86 / x86_64 case, testing for NaNs with fxam, which isn't actually needed once you use an unordered comparison and let the NaNs pass through the same subtraction as non-NaN inputs). This patch removes the x86 / x86_64 / powerpc versions, so that those architectures use the generic C versions, which correctly handle setting errno and deal properly with sNaN inputs. This seems better than dealing with setting errno in lots of .S versions. The i386 versions also return results with excess range and precision, which is not appropriate for a function exactly defined by reference to IEEE operations. For errno setting to work correctly on overflow, it's necessary to remove excess range with math_narrow_eval, which this patch duly does in the float and double versions so that the tests can reliably pass on x86. For float, this avoids any double rounding issues as the long double precision is more than twice that of float. For double, double rounding issues will need to be addressed separately, so this patch does not fully fix bug 20255. Tested for x86_64, x86 and powerpc. [BZ #6796] [BZ #20255] [BZ #20256] * math/s_fdim.c: Include <math_private.h>. (__fdim): Use math_narrow_eval on result. * math/s_fdimf.c: Include <math_private.h>. (__fdimf): Use math_narrow_eval on result. * sysdeps/i386/fpu/s_fdim.S: Remove file. * sysdeps/i386/fpu/s_fdimf.S: Likewise. * sysdeps/i386/fpu/s_fdiml.S: Likewise. * sysdeps/i386/i686/fpu/s_fdim.S: Likewise. * sysdeps/i386/i686/fpu/s_fdimf.S: Likewise. * sysdeps/i386/i686/fpu/s_fdiml.S: Likewise. * sysdeps/powerpc/fpu/s_fdim.c: Likewise. * sysdeps/powerpc/fpu/s_fdimf.c: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_fdim.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_fdim.c: Likewise. * sysdeps/x86_64/fpu/s_fdiml.S: Likewise. * math/libm-test.inc (fdim_test_data): Expect errno setting on overflow. Add sNaN tests.
* powerpc: strcasecmp/strncasecmp optmization for power8raji2016-06-1411-49/+598
| | | | | | | This implementation utilizes vectors to improve performance compared to current byte by byte implementation for POWER7. The performance improvement is upto 4x. This patch is tested on powerpc64 and powerpc64le.
* powerpc: Fix --disable-multi-arch build on POWER8Tulio Magno Quites Machado Filho2016-06-065-6/+27
| | | | | | Add missing symbols of stpncpy and strcasestr when multi-arch is disabled. Fix memset call from strncpy/stpncpy when multi-arch is disabled.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-08-11 10:33:09 +0000