about summary refs log tree commit diff
path: root/sysdeps/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01577-577/+577
|
* powerpc: Do not run IFUNC resolvers for LD_DEBUG=unused [BZ #24214]Adhemerval Zanella2019-12-192-4/+6
| | | | | | | | | | | This patch adds the missing bits for powerpc and fixes both tst-ifunc-fault-lazy and tst-ifunc-fault-bindnow failures on powerpc-linux-gnu. Checked on powerpc-linux-gnu and powerpc-linux-gnu-power4. Reviewed-by: Florian Weimer <fweimer@redhat.com> Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Expand $(as-needed) and $(no-as-needed) throughout the build systemFlorian Weimer2019-12-031-1/+1
| | | | | | | | | Since commit a3cc4f48e94f32c9532ee36982ac00eb1e5719b0 ("Remove --as-needed configure test."), --as-needed support is no longer optional. The macros are not much shorter and do not provide documentary value, either, so this commit removes them.
* nptl: Add default pthreadtypes-arch.hAdhemerval Zanella2019-11-261-44/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch adds a default pthreadtypes-arch.h, the idea is to simpify new ports inclusion and an override is required only if the architecture adds some arch-specific extensions or requirement. The default values on the new generic header are based on current architecture define value and they are not optimal compared to current code requirements as below. - On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is sizeof (struct pthread_barrier) is 20 bytes. - On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while sizeof (struct pthread_attr) is 32. The default values are not changed so the generic header could be used by some architectures. Checked with a build on affected abis. Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
* nptl: Add struct_rwlock.hAdhemerval Zanella2019-11-262-27/+61
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic __pthread_rwlock_arch_t definition meant to be used by new ports. Its layout mimics the current usage on some 64 bits ports and it allows some ports to use the generic definition. The arch __pthread_rwlock_arch_t definition is moved from pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h). Also the static intialization macro for pthread_rwlock_t is set to use an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its implementation. The default pthread_rwlock_t layout differs from current ports with: 1. Internal layout is the same for 32 bits and 64 bits. 2. Internal flag is an unsigned short so it should not required additional padding to align for word boundary (if it is the case for the ABI). Checked with a build on affected abis. Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
* nptl: Add struct_mutex.hAdhemerval Zanella2019-11-262-7/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current way of defining the common mutex definition for POSIX and C11 on pthreadtypes-arch.h (added by commit 06be6368da16104be5) is not really the best options for newer ports. It requires define some misleading flags that should be always defined as 0 (__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it exposes options used solely for linuxthreads compat mode (__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and requires newer ports to explicit define them (adding more boilerplate code). This patch adds a new default __pthread_mutex_s definition meant to be used by newer ports. Its layout mimics the current usage on both 32 and 64 bits ports and it allows most ports to use the generic definition. Only ports that use some arch-specific definition (such as hardware lock-elision or linuxthreads compat) requires specific headers. For 32 bit, the generic definitions mimic the other 32-bit ports of using an union to define the fields uses on adaptive and robust mutexes (thus not allowing both usage at same time) and by using a single linked-list for robust mutexes. Both decisions seemed to follow what recent ports have done and make the resulting pthread_mutex_t/mtx_t object smaller. Also the static intialization macro for pthread_mutex_t is set to use a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine in its struct_mutex.h if it requires additional fields to be initialized. Checked with a build on affected abis. Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
* nptl: Remove rwlock elision definitionsAdhemerval Zanella2019-11-261-5/+2
| | | | | | | | | | The new rwlock implementation added by cc25c8b4c1196 (2.25) removed support for lock-elision. This patch removes remaining the arch-specific unused definitions. Checked with a build against all affected ABIs. Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
* nptl: Add tests for internal pthread_rwlock_t offsetsAdhemerval Zanella2019-11-261-0/+6
| | | | | | | | | | | | | This patch new build tests to check for internal fields offsets for internal pthread_rwlock_t definition. Althoug the '__data.__flags' field layout should be preserved due static initializators, the patch also adds tests for the futexes that may be used in a shared memory (although using different libc version in such scenario is not really supported). Checked with a build against all affected ABIs. Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
* nptl: Cleanup mutex internal offset testsAdhemerval Zanella2019-11-261-8/+0
| | | | | | | | | | | | | The offsets of pthread_mutex_t __data.__nusers, __data.__spins, __data.elision, __data.list are not required to be constant over the releases. Only the __data.__kind is used for static initializers. This patch also adds an additional size check for __data.__kind. Checked with a build against affected ABIs. Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
* [powerpc] No need to enter "Ignore Exceptions Mode"Paul A. Clarke2019-10-021-4/+15
| | | | | | | | | Since at least POWER8, there is no performance advantage to entering "Ignore Exceptions Mode", and doing so conditionally requires - the conditional logic, and - a system call. Make it a no-op for uses within glibc.
* Split up endian.h to minimize exposure of BYTE_ORDER.Alistair Francis2019-10-012-36/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With only two exceptions (sys/types.h and sys/param.h, both of which historically might have defined BYTE_ORDER) the public headers that include <endian.h> only want to be able to test __BYTE_ORDER against __*_ENDIAN. This patch creates a new bits/endian.h that can be included by any header that wants to be able to test __BYTE_ORDER and/or __FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs __LONG_LONG_PAIR. It only defines macros in the implementation namespace. The existing bits/endian.h (which could not be included independently of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER) is renamed to bits/endianness.h. I also took the opportunity to canonicalize the form of this header, which we are stuck with having one copy of per architecture. Since they are so short, this means git doesn’t understand that they were renamed from existing headers, sigh. endian.h itself is a nonstandard header and its only remaining use from a standard header is guarded by __USE_MISC, so I dropped the __USE_MISC conditionals from around all of the public-namespace things it defines. (This means, an application that requests strict library conformance but includes endian.h will still see the definition of BYTE_ORDER.) A few changes to specific bits/endian(ness).h variants deserve mention: - sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did have selectable endianness, but we have assembly code in sysdeps/ia64 that assumes it’s little-endian, so there is no reason to treat the ia64 endianness.h as linux-specific. - The C-SKY port does not fully support big-endian mode, the compile will error out if __CSKYBE__ is defined. - The PowerPC port had extra logic in its bits/endian.h to detect a broken compiler, which strikes me as unnecessary, so I removed it. - The only files that defined __FLOAT_WORD_ORDER always defined it to the same value as __BYTE_ORDER, so I removed those definitions. The SH bits/endian(ness).h had comments inconsistent with the actual setting of __FLOAT_WORD_ORDER, which I also removed. - I *removed* copyright boilerplate from the few bits/endian(ness).h headers that had it; these files record a single fact in a fashion dictated by an external spec, so I do not think they are copyrightable. As long as I was changing every copy of ieee754.h in the tree, I noticed that only the MIPS variant includes float.h, because it uses LDBL_MANT_DIG to decide among three different versions of ieee854_long_double. This patch makes it not include float.h when GCC’s intrinsic __LDBL_MANT_DIG__ is available. * string/endian.h: Unconditionally define LITTLE_ENDIAN, BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping macros only on !__ASSEMBLER__. Move the definitions of __BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER, and __LONG_LONG_PAIR to... * string/bits/endian.h: ...this new file, which includes the renamed header bits/endianness.h for the definition of __BYTE_ORDER and possibly __FLOAT_WORD_ORDER. * string/Makefile: Install bits/endianness.h. * include/bits/endian.h: New wrapper. * bits/endian.h: Rename to bits/endianness.h. Add multiple-include guard. Rewrite the comment explaining what the machine-specific variants of this file should do. * sysdeps/unix/sysv/linux/ia64/bits/endian.h: Move to sysdeps/ia64. * sysdeps/aarch64/bits/endian.h * sysdeps/alpha/bits/endian.h * sysdeps/arm/bits/endian.h * sysdeps/csky/bits/endian.h * sysdeps/hppa/bits/endian.h * sysdeps/ia64/bits/endian.h * sysdeps/m68k/bits/endian.h * sysdeps/microblaze/bits/endian.h * sysdeps/mips/bits/endian.h * sysdeps/nios2/bits/endian.h * sysdeps/powerpc/bits/endian.h * sysdeps/riscv/bits/endian.h * sysdeps/s390/bits/endian.h * sysdeps/sh/bits/endian.h * sysdeps/sparc/bits/endian.h * sysdeps/x86/bits/endian.h: Rename to endianness.h; canonicalize form of file; remove redundant definitions of __FLOAT_WORD_ORDER. * sysdeps/powerpc/bits/endianness.h: Remove logic to check for broken compilers. * ctype/ctype.h * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h * sysdeps/arm/nptl/bits/pthreadtypes-arch.h * sysdeps/csky/nptl/bits/pthreadtypes-arch.h * sysdeps/ia64/ieee754.h * sysdeps/ieee754/ieee754.h * sysdeps/ieee754/ldbl-128/ieee754.h * sysdeps/ieee754/ldbl-128ibm/ieee754.h * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h * sysdeps/mips/ieee754/ieee754.h * sysdeps/mips/nptl/bits/pthreadtypes-arch.h * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h * sysdeps/nptl/pthread.h * sysdeps/riscv/nptl/bits/pthreadtypes-arch.h * sysdeps/sh/nptl/bits/pthreadtypes-arch.h * sysdeps/sparc/sparc32/ieee754.h * sysdeps/unix/sysv/linux/generic/bits/stat.h * sysdeps/unix/sysv/linux/generic/bits/statfs.h * sysdeps/unix/sysv/linux/sys/acct.h * wctype/bits/wctype-wchar.h: Include bits/endian.h, not endian.h. * sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h. * sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__ in ifdefs, instead of LDBL_MANT_DIG. Only include float.h when __LDBL_MANT_DIG__ is not predefined, in which case define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
* [powerpc] Rename fesetenv_mode to fesetenv_controlPaul A. Clarke2019-09-275-6/+6
| | | | | | | fesetenv_mode is used variously to write the FPSCR exception enable bits and rounding mode bits. These are referred to as the control bits in the POWER ISA. Change the name to be reflective of its current and expected use, and match up well with fegetenv_control.
* [powerpc] libc_feholdsetround_noex_ppc_ctx: optimize FPSCR writePaul A. Clarke2019-09-271-1/+1
| | | | | | | | | | | | libc_feholdsetround_noex_ppc_ctx currently performs: 1. Read FPSCR, save to context. 2. Create new FPSCR value: clear enables and set new rounding mode. 3. Write new value to FPSCR. Since other bits just pass through, there is no need to write them. Instead, write just the changed values (enables and rounding mode), which can be a bit more efficient.
* [powerpc] Rename fegetenv_status to fegetenv_controlPaul A. Clarke2019-09-277-9/+9
| | | | | | | | | | | fegetenv_status is used variously to retrieve the FPSCR exception enable bits, rounding mode bits, or both. These are referred to as the control bits in the POWER ISA. FPSCR status bits are also returned by the 'mffs' and 'mffsl' instructions, but they are uniformly ignored by all uses of fegetenv_status. Change the name to be reflective of its current and expected use. Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
* [powerpc] __fesetround_inline optimizationsPaul A. Clarke2019-09-271-3/+15
| | | | | | | | | On POWER9, use more efficient means to update the 2-bit rounding mode via the 'mffscrn' instruction (instead of two 'mtfsb0/1' instructions or one 'mtfsfi' instruction that modifies 4 bits). Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com> Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
* [powerpc] libc_feupdateenv_test: optimize FPSCR accessPaul A. Clarke2019-09-272-2/+18
| | | | | | | | | | | | ROUND_TO_ODD and a couple of other places use libc_feupdateenv_test to restore the rounding mode and exception enables, preserve exception flags, and test whether given exception(s) were generated. If the exception flags haven't changed, then it is sufficient and a bit more efficient to just restore the rounding mode and enables, rather than writing the full Floating-Point Status and Control Register (FPSCR). Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
* [powerpc] fenv_private.h clean upPaul A. Clarke2019-09-278-117/+38
| | | | | | | | | | | fenv_private.h includes unused functions, magic macro constants, and some replicated common code fragments. Remove unused functions, replace magic constants with constants from fenv_libc.h, and refactor replicated code. Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com> Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
* [powerpc] SET_RESTORE_ROUND optimizations and bug fixPaul A. Clarke2019-09-192-25/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SET_RESTORE_ROUND brackets a block of code, temporarily setting and restoring the rounding mode and letting everything else, including exceptions generated within the block, pass through. On powerpc, the current code clears the exception enables, which will hide exceptions generated within the block. This issue was introduced by me in commit e905212627350d54b58426214b5a54ddc852b0c9. Fix this by not clearing exception enable bits in the prologue. Also, since we are no longer changing the enable bits in either the prologue or the epilogue, there is no need to test for entering/exiting non-stop mode. Also, optimize the prologue get/save/set rounding mode operations for POWER9 and later by using 'mffscrn' when possible. Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com> Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com> Fixes: e905212627350d54b58426214b5a54ddc852b0c9 2019-09-19 Paul A. Clarke <pc@us.ibm.com> * sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_and_set_rn): New. (__fe_mffscrn): New. * sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc_ctx): Do not clear enable bits, remove obsolete code, use fegetenv_and_set_rn. (libc_feresetround_ppc): Remove obsolete code, use fegetenv_and_set_rn.
* Refactor vDSO initialization codeAdhemerval Zanella2019-09-172-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux vDSO initialization code the internal function pointers require a lot of duplicated boilerplate over different architectures. This patch aims to simplify not only the code but the required definition to enable a vDSO symbol. The changes are: 1. Consolidate all init-first.c on only one implementation and enable the symbol based on HAVE_*_VSYSCALL existence. 2. Set the HAVE_*_VSYSCALL to the architecture expected names string. 3. Add a new internal implementation, get_vdso_mangle_symbol, which returns a mangled function pointer. Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time are handled in an arch-independent way, powerpc still uses some arch-specific vDSO symbol handled in a specific init-first implementation. Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu, mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and x86_64-linux-gnu. * sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address, is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED. * sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address): Likewise. * sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file. * sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/arm/init-first.c: Likewise. * sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/mips/init-first.c: Likewise. * sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/i386/init-first.c: Likewise. * sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise. * sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/s390/init-first.c: Likewise. * sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported name. * sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ, HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to invalid names if architecture does not define them. (get_vdso_mangle_symbol): New symbol. * sysdeps/unix/sysv/linux/init-first.c: New file. * sysdeps/unix/sysv/linux/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday, clock_gettime, clock_getres, getcpu, time): Remove declaration. (__libc_vdso_platform_setup_arch): Likewise and use get_vdso_mangle_symbol to setup vDSO symbols. (sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add attribute_hidden. * sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove definition.
* Fix three GNU license URLs, along with trailing-newline issues.Paul Eggert2019-09-071-2/+1
|
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07575-575/+575
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* [powerpc] fegetenv_status: simplify instruction generationPaul A. Clarke2019-08-281-15/+6
| | | | | | | | | | | | | | fegetenv_status() wants to use the lighter weight instruction 'mffsl' for reading the Floating-Point Status and Control Register (FPSCR). It currently will use it directly if compiled '-mcpu=power9', and will perform a runtime check (cpu_supports("arch_3_00")) otherwise. Nicely, it turns out that the 'mffsl' instruction will decode to 'mffs' on architectures older than "arch_3_00" because the additional bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset of 'mffsl'. So, just generate 'mffsl'.
* [powerpc] fesetenv: optimize FPSCR accessPaul A. Clarke2019-08-281-8/+4
| | | | | | | | | | | | | | fesetenv() reads the current value of the Floating-Point Status and Control Register (FPSCR) to determine the difference between the current state of exception enables and the newly requested state. All of these bits are also returned by the lighter weight 'mffsl' instruction used by fegetenv_status(). Use that instead. Also, remove a local macro _FPU_MASK_ALL in favor of a common macro, FPU_ENABLES_MASK from fenv_libc.h. Finally, use a local variable ('new') in favor of a pointer dereference ('*envp').
* [powerpc] SET_RESTORE_ROUND improvementsPaul A. Clarke2019-08-281-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and libc_feresetround_ppc_ctx to bracket a block of code where the floating point rounding mode must be set to a certain value. For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs: 1. Read/save FPSCR. 2. Create new value for FPSCR with new rounding mode and enables cleared. 3. If new value is different than current value, a. If transitioning from a state where some exceptions enabled, enter "ignore exceptions / non-stop" mode. b. Write new value to FPSCR. c. Put a mark on the wall indicating the FPSCR was changed. (1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl' instruction can be used, but it doesn't return all of the bits in the FPSCR. fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be used instead of fegetenv_register. (3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must instead use 'mtfsf 0b00000011' to write just the enables and the mode, because some of the rest of the bits are not valid if 'mffsl' was used. fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111' otherwise. For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with parameters such that it performs: 1. Retreive saved value of FPSCR, saved in prologue above. 2. Read FPSCR. 3. Create new value of FPSCR where: - Summary bits and exception indicators = current OR saved. - Rounding mode and enables = saved. - Status bits = current. 4. If transitioning from some exceptions enabled to none, enter "ignore exceptions / non-stop" mode. 5. If transitioning from no exceptions enabled to some, enter "catch exceptions" mode. 6. Write new value to FPSCR. The summary bits are hardwired to the exception indicators, so there is no need to restore any saved summary bits. The exception indicator bits, which are sticky and remain set unless explicitly cleared, would only need to be restored if the code block might explicitly clear any of them. This is certainly not expected. So, the only bits that need to be restored are the enables and the mode. If it is the case that only those bits are to be restored, there is no need to read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to write the bits being restored. We know we are transitioning out of "ignore exceptions" mode, so step (4) is unnecessary, and in step (6), we only need to check the state we are entering.
* [powerpc] fe{en,dis}ableexcept, fesetmode: optimize FPSCR accessesPaul A. Clarke2019-08-284-24/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the "mode" (exception enable and rounding mode) bits of the Floating Point Status Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be used to write just those bits back to the FPSCR. The net is better performance. In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or they determine that it doesn't need to be written because it is not changing. In either case, the local variable holds the current values of the enable bits in the FPSCR. This local variable can be used instead of again reading the FPSCR. Also, that value of the FPSCR which is read the second time is validated against the requested enables. Since the write can't fail, this validation step is unnecessary, and can be removed. Instead, the exceptions to be enabled (or disabled) are transformed into available bits in the FPSCR, then validated after being transformed back, to ensure that all requested bits are actually being set. For example, FE_INVALID_SQRT can be requested, but cannot actually be set. This bit is not mapped during the transformations, so a test for that bit being set before and after transformations will show the bit would not be set, and the function will return -1 for failure. Finally, convert the local macros in fesetmode.c to more generally useful macros in fenv_libc.h.
* [powerpc] fe{en,dis}ableexcept optimize bit translationsPaul A. Clarke2019-08-283-33/+63
| | | | | | | | | | | The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc. Within the functions, these bits must be translated to/from the corresponding enable bits in the Floating Point Status Control Register (FPSCR). This translation is currently done bit-by-bit. The compiler generates a series of conditional bit operations. Nicely, the "FE" exception bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit operation can instead be performed by a shift with appropriate masking.
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
* powerpc: Cleanup: use actual power8 assembly mnemonicsRaoni Fassina Firmino2019-08-0111-187/+87
| | | | | | | | | | | | | | | | | | | | | | Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had pre power8 compatible binutils hardcoded macros and were not using .machine power8. This patch should not have semantic changes, in fact it should have the same exact code generated. Tested that generated stripped shared objects are identical when using "strip --remove-section=.note.gnu.build-id". Checked on: - powerpc64le, power9, build-many-glibcs.py, gcc 6.4.1 20180104, binutils 2.26.2.20160726 - powerpc64le, power8, debian 9, gcc 6.3.0 20170516, binutils 2.28 - powerpc64le, power9, ubuntu 19.04, gcc 8.3.0, binutils 2.32 - powerpc64le, power9, opensuse tumbleweed, gcc 9.1.1 20190527, binutils 2.32 - powerpc64, power9, debian 10, gcc 8.3.0, binutils 2.31.1 Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* [powerpc] fenv_libc.h: protect use of __builtin_cpu_supportsPaul A. Clarke2019-07-091-1/+3
| | | | | | | | | | | | | Using __builtin_cpu_supports() requires support in GCC and Glibc. My recent patch to fenv_libc.h added an unprotected use of __builtin_cpu_supports(). Compilation of Glibc itself will fail with a sufficiently new GCC and sufficiently old Glibc: ../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’: ../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror] Reviewed-by: Florian Weimer <fweimer@redhat.com> Fixes 3db85a9814784a74536a1f0e7b7ddbfef7dc84bb.
* powerpc: refactor logb{f,l}Adhemerval Zanella2019-07-0820-125/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power7 logb implementation does not show a performance gain on ISA 2.07+ chips with faster floating-point to GRP instructions (currently POWER8 and POWER9). This patch moves the POWER7 implementation to generic one and enables it for POWER7. It also add some cleanup to use inline floating-point number instead of define them using static const. The performance difference is for POWER9: - Without patch: "logb": { "subnormal": { "duration": 4.99202e+09, "iterations": 8.83662e+08, "max": 75.194, "min": 5.501, "mean": 5.64925 }, "normal": { "duration": 4.97063e+09, "iterations": 9.97094e+08, "max": 46.489, "min": 4.956, "mean": 4.98512 } } - With patch: "logb": { "subnormal": { "duration": 4.97226e+09, "iterations": 9.92036e+08, "max": 77.209, "min": 4.892, "mean": 5.01218 }, "normal": { "duration": 4.96192e+09, "iterations": 1.07545e+09, "max": 12.361, "min": 4.593, "mean": 4.61382 } } The ifunc implementation is also enabled only for powerpc64. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/power7/fpu/s_logb.c: Move to ... * sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants. * sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ... * sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants. * sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ... * sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_log* objects. (CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c, CFLAGS-s_logb-power7.c): New fule. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file. * sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file. * sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Refactor modf{f}Adhemerval Zanella2019-07-0812-42/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modf{f} optimization is not an optimization for ISA 2.07+. This patch move the IFUNC for powerpc64 only, move the power5+ to generic location, and include the generic implementation for ISA 2.07+. The performance changes are based on modf benchtests: * POWER9 - ppc64 "modf": { "": { "duration": 4.97057e+09, "iterations": 1.00688e+09, "max": 28.76, "min": 4.912, "mean": 4.9366 } } * POWER9 - power5+ "modf": { "": { "duration": 4.98291e+09, "iterations": 9.32818e+08, "max": 15.058, "min": 5.107, "mean": 5.34178 } } * POWER8 - ppc64 "modf": { "": { "duration": 5.05329e+09, "iterations": 8.38814e+08, "max": 518.051, "min": 5.79, "mean": 6.02433 } } * POWER8 - power5+ "modf": { "": { "duration": 5.05573e+09, "iterations": 8.35254e+08, "max": 63.141, "min": 5.873, "mean": 6.05293 } } * POWER7 - ppc64 "modf": { "": { "duration": 4.89818e+09, "iterations": 1.08408e+09, "max": 57.556, "min": 3.953, "mean": 4.51827 } } * POWER7 - power5+ "modf": { "": { "duration": 4.83789e+09, "iterations": 1.33409e+09, "max": 46.608, "min": 2.224, "mean": 3.62636 } } Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/power5+/fpu/s_modf.c: Move to ... * sysdeps/powerpc/fpu/s_modf.c: ... here. Add ISA 2.07 optimization. * sysdeps/powerpc/power5+/fpu/s_modff.c: Move to ... * sysdeps/powerpc/fpu/s_modff.c: ... here. Add ISA 2.07 optimization. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-power5+.c: Adjust include. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff-power5+.c: Likewise. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (sysdep_calls, sysdep_routines): Add s_modf* objects. (CFLAGS-s_modf-power5+.c, CFLAGS-s_modff-power5+.c, CFLAGS-s_modf-ppc64.c, CFLAGS-s_modff-ppc64.c): New rule. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Movo to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c: Move ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-power5+.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-power5+.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff.c: ... here. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: hypot refactor and optimizationAdhemerval Zanella2019-07-088-232/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc hypot is slight optimized by: - Commit 8df4e219e43, both isnan and isinf are always inlined and thus the check TEST_INF_NAN does not make sense anymore. The generic check for POWER7 should be faster on all powerpc configuration. - The redundant check 'y > two60factor && (x / y) > two60' is removed. Both changes leads to unrequired ifunc especialization for power7 and thus they are removed. Finally The code is also cleanup a bit by inlining the constants floating points. The performance changes using the hypot benchtests are: - POWER9 without patch: "hypot": { "overflow": { "duration": 4.98585e+09, "iterations": 4.84932e+08, "max": 46.551, "min": 10.229, "mean": 10.2815 }, "higher_two500": { "duration": 5.00192e+09, "iterations": 4.24843e+08, "max": 33.319, "min": 11.606, "mean": 11.7736 }, "subnormal": { "duration": 5.0075e+09, "iterations": 4.06792e+08, "max": 22.178, "min": 12.15, "mean": 12.3097 }, "less_two500": { "duration": 5.00685e+09, "iterations": 4.08772e+08, "max": 22.784, "min": 12.052, "mean": 12.2485 }, "default": { "duration": 5.06002e+09, "iterations": 4.09894e+08, "max": 20.648, "min": 11.874, "mean": 12.3447 } } - POWER9 with patch: "hypot": { "overflow": { "duration": 4.91848e+09, "iterations": 7.28039e+08, "max": 47.958, "min": 6.436, "mean": 6.75579 }, "higher_two500": { "duration": 4.9359e+09, "iterations": 6.63376e+08, "max": 20.783, "min": 7.321, "mean": 7.44057 }, "subnormal": { "duration": 4.9479e+09, "iterations": 6.19772e+08, "max": 18.856, "min": 7.817, "mean": 7.98341 }, "less_two500": { "duration": 4.94275e+09, "iterations": 6.3889e+08, "max": 17.452, "min": 7.597, "mean": 7.73647 }, "default": { "duration": 5.03645e+09, "iterations": 5.70718e+08, "max": 18.904, "min": 8.55, "mean": 8.82476 } } - POWER7 without patch "hypot": { "overflow": { "duration": 4.86637e+09, "iterations": 6.43196e+08, "max": 53.958, "min": 7.328, "mean": 7.56592 }, "higher_two500": { "duration": 4.99842e+09, "iterations": 3.11012e+08, "max": 78.227, "min": 15.696, "mean": 16.0715 }, "subnormal": { "duration": 4.99841e+09, "iterations": 3.08935e+08, "max": 51.392, "min": 15.983, "mean": 16.1795 }, "less_two500": { "duration": 5.00108e+09, "iterations": 2.99464e+08, "max": 73.247, "min": 16.416, "mean": 16.7001 }, "default": { "duration": 5.04645e+09, "iterations": 3.52608e+08, "max": 70.073, "min": 13.38, "mean": 14.3118 } } - POWER7 with patch "hypot": { "overflow": { "duration": 4.80785e+09, "iterations": 8.00001e+08, "max": 66.262, "min": 5.888, "mean": 6.00981 }, "higher_two500": { "duration": 4.9859e+09, "iterations": 3.39449e+08, "max": 5148.44, "min": 14.539, "mean": 14.6882 }, "subnormal": { "duration": 4.9905e+09, "iterations": 3.28874e+08, "max": 64.905, "min": 14.971, "mean": 15.1745 }, "less_two500": { "duration": 4.99494e+09, "iterations": 3.19755e+08, "max": 103.696, "min": 14.972, "mean": 15.6211 }, "default": { "duration": 5.03951e+09, "iterations": 4.02502e+08, "max": 61.008, "min": 12.368, "mean": 12.5205 } } Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/e_hypot.c (two60, two500, two600, two1022, twoM500, twoM600, two60factor, pdnum): Remove. (TEST_INFO_NAN, GET_TW0_HIGH_WORD): Remove macro. (__ieee754_hypot): Replace static variables with inline definition, remove ununsed branches. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove e_hypot-* objects. (CFLAGS-e_hypot-power7.c, CFLAGS-e_hypotf-power7.c): Remove rule. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-power7.c: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-power7.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Use faster means to access FPSCR when possible in some casesPaul A. Clarke2019-06-305-30/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Using 'mffs' instruction to read the Floating Point Status Control Register (FPSCR) can force a processor flush in some cases, with undesirable performance impact. If the values of the bits in the FPSCR which force the flush are not needed, an instruction that is new to POWER9 (ISA version 3.0), 'mffsl' can be used instead. Cases included: get_rounding_mode, fegetround, fegetmode, fegetexcept. * sysdeps/powerpc/bits/fenvinline.h (__fegetround): Use __fegetround_ISA300() or __fegetround_ISA2() as appropriate. (__fegetround_ISA300) New. (__fegetround_ISA2) New. * sysdeps/powerpc/fpu_control.h (IS_ISA300): New. (_FPU_MFFS): Move implementation... (_FPU_GETCW): Here. (_FPU_MFFSL): Move implementation.... (_FPU_GET_RC_ISA300): Here. New. (_FPU_GET_RC): Use _FPU_GET_RC_ISA300() or _FPU_GETCW() as appropriate. * sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_status_ISA300): New. (fegetenv_status): New. * sysdeps/powerpc/fpu/fegetmode.c (fegetmode): Use fegetenv_status() instead of fegetenv_register(). * sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Likewise. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* powerpc: Use generic e_expfAdhemerval Zanella2019-06-267-383/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generic implementation is faster on both power8 and power9: POWER9: - sysdeps/ieee754/flt-32/e_expf.c "expf": { "workload-spec2017.wrf": { "duration": 5.1236e+09, "iterations": 7.53344e+08, "reciprocal-throughput": 5.9436, "latency": 7.65869, "max-throughput": 1.68248e+08, "min-throughput": 1.30571e+08 } } - sysdeps/powerpc/powerpc64/power8/fpu/e_expf.S "expf": { "workload-spec2017.wrf": { "duration": 5.14429e+09, "iterations": 5.29248e+08, "reciprocal-throughput": 8.05372, "latency": 11.3863, "max-throughput": 1.24166e+08, "min-throughput": 8.78249e+07 } } Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove e_expf-power8 and expf-ppc64. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-power8.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/e_expf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
* powerpc: Refactor powerpc32 lround/lroundf/llround/llroundfAdhemerval Zanella2019-06-2622-547/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc llround{f} implementations on the generic sysdeps/powerpc/powerpc32/fpu/s_llround{f}. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc32/fpu/Makefile [$(subdir) == math] (CFLAGS-s_lround.c): New rule. * sysdeps/powerpc/powerpc32/fpu/s_llround.c (__llround): Add power5+ and fctidz optimization. * sysdeps/powerpc/powerpc32/fpu/s_lround.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_lround.c: New file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (CFLAGS-s_llround-power6.c, CFLAGS-s_llround-power5+.c, CFLAGS-s_llround-ppc32.c, CFLAGS-s_lround-ppc32.c, CFLAGS-s_lround-power5+.c): New rule. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power5+.c: New file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power6.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-power5+.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power5+.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-power5+.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S: Likewise. * sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc32/power5+/fpu/s_llroundf.S: Likewise. * sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_llroundf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
* [powerpc] add 'volatile' to asmPaul A. Clarke2019-06-192-5/+5
| | | | | | | | | | | | | | Add 'volatile' keyword to a few asm statements, to force the compiler to generate the instructions therein. Some instances were implicitly volatile, but adding keyword for consistency. 2019-06-19 Paul A. Clarke <pc@us.ibm.com> * sysdeps/powerpc/fpu/fenv_libc.h (relax_fenv_state): Add 'volatile'. * sysdeps/powerpc/fpu/fpu_control.h (__FPU_MFFS): Likewise. (__FPU_MFFSL): Likewise. (_FPU_SETCW): Likewise.
* powerpc: Refactor powerpc64 lround/lroundf/llround/llroundfAdhemerval Zanella2019-06-1730-490/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc {l}lround{f} implementations on the generic sysdeps/powerpc/fpu/s_{l}lround{f}.c. The IFUNC support is also moved only to powerpc64 only, since for powerpc64le generic implementation resulting in optimized code. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_llround-power8, s_llround-power6x, s_llround-power5+, s_llround-ppc64, and s_llroundf-ppc64. (CFLAGS-s_llround-power8.c, CFLAGS-s_llround-power6x.c, CFLAGS-s_llround-power5+.c): New rule. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power5+.c: New file. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power6x.c: Likewise. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power8.c: Likewise. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llroundf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llroundf.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_lround.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lround.c: ... here. * sysdeps/powerpc/powerpc64/fpu/Makefile [$(subdir) == math] (CFLAGS-s_llround.c): New rule. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove s_llround-* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power5+.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power6x.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lround.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lroundf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llround.c: New file. * sysdeps/powerpc/powerpc64/fpu/s_llroundf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lround.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lroundf.c: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_llroundf.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_llroundf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_llroundf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Refactor powerpc32 lrint/lrintf/llrint/llrintfAdhemerval Zanella2019-06-1722-342/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc llrint{f} implementations on the generic sysdeps/powerpc/powerpc32/fpu/s_llrint{f}. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cpu and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/s_lrintf.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Move to ... * sysdeps/powerpc/fpu/s_lrintf.c: ... here. * sysdeps/powerpc/powerpc32/fpu/Makefile [$(subdir) == math] (CFLAGS-s_lrint.c): New rule. * sysdeps/powerpc/powerpc32/fpu/s_llrint.c (__llrint): Add power4 optimization. * sysdeps/powerpc/powerpc32/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_lrint.c: New file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (CFLAGS-s_llrintf-power6.c, CFLAGS-s_llrintf-ppc32.c, CFLAGS-s_llrint-power6.c, CFLAGS-s_llrint-ppc32.c, CFLAGS-s_lrint-ppc32.c): New rule. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-power6.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-power6.c: New file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-power6.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint-ppc32.c: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: refactor powerpc64 lrint/lrintf/llrint/llrintfAdhemerval Zanella2019-06-1721-225/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc llrint{f} implementations on the generic sysdeps/powerpc/fpu/s_llrint{f}. The IFUNC support is also moved only to powerpc64 only, since for powerpc64le generic implementation resulting in optimized code. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_llrint-power8, s_llrint-power6x, and s_llrint-ppc64. (CFLAGS-s_llrint-power8.c, CFLAGS-s_llrint-power6x.c): New rule. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power6x.c: New file. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power8.c: Likewise. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_lrint.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrintf.c: ... here. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: New file. * sysdeps/powerpc/powerpc64/fpu/Makefile: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove s_llrint-* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power6x.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llrint.c: New file. * sysdeps/powerpc/powerpc64/fpu/s_llrintf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lrint.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/s_llrintf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_lrint.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Remove optimized finiteAdhemerval Zanella2019-06-1219-654/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc finite optimization do not show much gain: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power7 uses ftdiv to optimize for some input patterns, but at cost of others. Comparing against generic C implementation built for powerpc64-linux-gnu-power7 (--with-cpu=power7): - Generic sysdeps/ieee754 implementation: "isfinite": { "": { "duration": 5.0082e+09, "iterations": 2.45299e+09, "max": 43.824, "min": 2.008, "mean": 2.04167 }, "INF": { "duration": 4.66554e+09, "iterations": 2.28288e+09, "max": 35.73, "min": 2.008, "mean": 2.04371 }, "NAN": { "duration": 4.66274e+09, "iterations": 2.28716e+09, "max": 34.161, "min": 2.009, "mean": 2.03866 } } - power7 optimized one: "isfinite": { "": { "duration": 4.99111e+09, "iterations": 2.65566e+09, "max": 25.015, "min": 1.716, "mean": 1.87942 }, "INF": { "duration": 4.6783e+09, "iterations": 2.0999e+09, "max": 35.264, "min": 1.868, "mean": 2.22787 }, "NAN": { "duration": 4.67915e+09, "iterations": 2.08678e+09, "max": 38.099, "min": 1.869, "mean": 2.24228 } } So it basically optimizes marginally for normal numbers while increasing the latency for other kind of FP. - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_finite* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-power7.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_finitef.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call): Remove s_finite* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power7.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_finitef.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_finitef.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Remove optimized isinfAdhemerval Zanella2019-06-1219-634/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc isinf optimizations onyl adds complexity: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power7 uses ftdiv to optimize for some input pattern and branch implementation for INF and denormal that does: return (ix & UINT64_C (0x7fffffffffffffff)) == UINT64_C (0x7ff0000000000000) Although it does show slight better latency than generic algorithm (as below), it is only for power7 and requires it to override it for power8. - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_isinf* and s_isinf* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-power7.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isinff.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call): Remove s_isinf* and s_isinf* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power7.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isinff.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isinff.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: Remove optimized isnanAdhemerval Zanella2019-06-1235-1381/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc isnan optimizations are not really a gain: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power5, power6, and power6x are just micro-optimization to improve the Load-Hit-Store hazards from floating-point to general register transfer, and current GCC already has support to minimize it by inserting either extra nops or group dispatch instructions. - The power7 uses ftdiv to optimize for some input patterns, but at cost of others. Comparing against generic C implementation built for powerpc-linux-gnu-power4 (which uses the hp-timing support on benchtests): - Generic sysdeps/ieee754 implementation: "isnan": { "": { "duration": 4.98415e+09, "iterations": 2.34516e+09, "max": 45.925, "min": 2.052, "mean": 2.12529 }, "INF": { "duration": 4.74057e+09, "iterations": 1.69761e+09, "max": 91.01, "min": 2.052, "mean": 2.79249 }, "NAN": { "duration": 4.74071e+09, "iterations": 1.68768e+09, "max": 282.343, "min": 2.052, "mean": 2.809 } } - power7 optimized one: $ ./testrun.sh benchtests/bench-isnan "isnan": { "": { "duration": 4.96842e+09, "iterations": 2.56297e+09, "max": 50.048, "min": 1.872, "mean": 1.93854 }, "INF": { "duration": 4.76648e+09, "iterations": 1.54213e+09, "max": 373.408, "min": 2.661, "mean": 3.09084 }, "NAN": { "duration": 4.76845e+09, "iterations": 1.54515e+09, "max": 51.016, "min": 2.736, "mean": 3.08607 } } So it basically optimizes marginally for normal numbers while increasing the latency for other kind of FP. - The generic implementation requires getting the floating point status, disable the invalid operation bit, and restore the floating-point status. Each operation is costly and requires flushing the FP pipeline. Using the same scenarion for the previous analysis: "isnan": { "": { "duration": 5.08284e+09, "iterations": 6.2898e+08, "max": 41.844, "min": 8.057, "mean": 8.08108 }, "INF": { "duration": 4.97904e+09, "iterations": 6.16176e+08, "max": 39.661, "min": 8.057, "mean": 8.08055 }, "NAN": { "duration": 4.98695e+09, "iterations": 5.95866e+08, "max": 29.728, "min": 8.345, "mean": 8.36925 } } - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/s_isnan.c: Remove file. * sysdeps/powerpc/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_isnan-* and s_isnanf-* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power5.S: Remove file * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power7.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power5.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_calls): Remove s_isnan-* and s_isnanf-* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power5.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6x.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power7.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isnanf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: copysign cleanupAdhemerval Zanella2019-06-1220-504/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC always expand copysign{f} for all possible cpus, so calling the libm is only done if user explicitly states to disable the builtin (which is done usually not for performance reason). So to provide ifunc variant for copysign is just unrequired complexity, since libm will be called on non-performance critical code. This patch removes both powerpc32 and powerpc64 ifunc variants and consolidates the powerpc implementation on sysdeps/powerpc/fpu/s_copysign{f}.c using compiler builtins. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/s_copysign.c: New file. * sysdeps/powerpc/fpu/s_copysignf.c: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdep_routines, libm-sysdep_routines): Remove s_copysign-power6 and s_copysign-ppc32. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-power6.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_copysignf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdeps_calls): Remove s_copysign-power6 s_copysign-ppc64. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-power6.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_copysignf.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_copysignf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* powerpc: consolidate rintAdhemerval Zanella2019-06-127-293/+32
| | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc rint{f} implementations on the generic sysdeps/powerpc/fpu/s_rint{f}. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode, round_to_integer_float, round_mode): Add RINT handling. (reset_fenv_mode): New symbol. * sysdeps/powerpc/fpu/s_rint.c (__rint): Use generic implementation. * sysdeps/powerpc/fpu/s_rintf.c (__rintf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_rint.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_rint.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* [powerpc] get_rounding_mode: utilize faster method to get rounding modePaul A. Clarke2019-06-062-3/+59
| | | | | | | | | Add support to use 'mffsl' instruction if compiled for POWER9 (or later). Also, mask the result to avoid bleeding unrelated bits into the result of _FPU_GET_RC(). Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* [powerpc] fegetexcept: utilize function instead of duplicating codePaul A. Clarke2019-06-051-13/+1
| | | | | | | | | | fegetexcept() included code which exactly duplicates the code in fenv_reg_to_exceptions(). Replace with a call to that function. 2019-06-05 Paul A. Clarke <pc@us.ibm.com> * sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Replace code with call to equivalent function.
* powerpc: Fix build failures with current GCCGabriel F. T. Gomes2019-05-307-37/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since GCC commit 271500 (svn), also known as the following commit on the git mirror: commit 61edec870f9fdfb5df3fa4e40f28cbaede28a5b1 Author: amodra <amodra@138bc75d-0d04-0410-961f-82ee72b054a4> Date: Wed May 22 04:34:26 2019 +0000 [RS6000] Don't pass -many to the assembler glibc builds are failing when an assembly implementation does not declare the correct '.machine' directive, or when no such directive is declared at all. For example, when a POWER6 instruction is used, but '.machine power6' is not declared, the assembler will fail with an error similar to the following: ../sysdeps/powerpc/powerpc64/power8/strcmp.S: Assembler messages: 24 ../sysdeps/powerpc/powerpc64/power8/strcmp.S:55: Error: unrecognized opcode: `cmpb' This patch adds '.machine powerN' directives where none existed, as well as it updates '.machine power7' directives on POWER8 files, because the minimum binutils version required to build glibc (binutils 2.25) now provides this machine version. It also adds '-many' to the assembler command used to build tst-set_ppr.c. Tested for powerpc, powerpc64, and powerpc64le, as well as with build-many-glibcs.py for powerpc targets. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* powerpc: generic nearbyint/nearbyintfAdhemerval Zanella2019-05-287-303/+75
| | | | | | | | | | | | | | This patches consolidates all the powerpc nearbyint{f} implementations on the generic sysdeps/powerpc/fpu/s_nearbyint{f}. * sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode): Add NEARBYINT handling. * sysdeps/powerpc/fpu/s_nearbyint.c: New file. * sysdeps/powerpc/fpu/s_nearbyintf.c: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Likewise.
* Remove support for PowerPC SPE extension (powerpc*-*-*gnuspe*).Zack Weinberg2019-05-2238-1530/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 9 dropped support for the SPE extensions to PowerPC, which means powerpc*-*-*gnuspe* configurations are no longer buildable with that compiler. This ISA extension was peculiar to the “e500” line of embedded PowerPC chips, which, as far as I can tell, are no longer being manufactured, so I think we should follow suit. This patch was developed by grepping for “e500”, “__SPE__”, and “__NO_FPRS__”, and may not eliminate every vestige of SPE support. Most uses of __NO_FPRS__ are left alone, as they are relevant to normal embedded PowerPC with soft-float. * sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe* host type. * scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe and powerpc-*-linux-gnuspe-e500v1 from list of build configurations. * sysdeps/powerpc/powerpc32/e500: Recursively delete. * sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h: Delete. * sysdeps/powerpc/fpu_control.h: Remove SPE variant. Issue an #error if used with a compiler in SPE-float mode. * sysdeps/powerpc/powerpc32/__longjmp_common.S * sysdeps/powerpc/powerpc32/setjmp_common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Remove code to preserve SPE register state. * sysdeps/unix/sysv/linux/powerpc/elision-lock.c * sysdeps/unix/sysv/linux/powerpc/elision-trylock.c * sysdeps/unix/sysv/linux/powerpc/elision-unlock.c Remove __SPE__ ifndefs.
* powerpc: trunc/truncf refactorAdhemerval Zanella2019-05-0932-665/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches consolidates all the powerpc trunc{f} implementations on the generic sysdeps/powerpc/fpu/s_trunc{f}. The generic implementation uses either the compiler builts for ISA 2.03+ (which generates the frim instruction) or a generic implementation which uses FP only operations. The IFUNC organization for powerpc64 is also change to be enabled only for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not require the fallback generic implementation). Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/trunc_to_integer.h (set_fenv_mode): Add TRUNC handling. (round_mode): Add definition for TRUNC. * sysdeps/powerpc/fpu/s_trunc.c: New file. * sysdeps/powerpc/fpu/s_truncf.c: New file. * sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Remove file. * sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.S: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.S: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.S: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.S: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.c: New file. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.c: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.c: Likewise. * sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.c: Likewise. * sysdep/powerpc/powerpc32/power5+/fpu/s_trunc.S: Remove file. * sysdep/powerpc/powerpc32/power5+/fpu/s_truncf.S: Likewise. * sysdep/powerpc/powerpc64/be/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_trunc-power5+, s_trunc-ppc64, s_truncf-power5+, and s_truncf-ppc64. (CFLAGS-s_trunc-power5+.c, CFLAGS-s_truncf-power5+.c): New rule. * sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-power5+.c: New file. * sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_trunc.c: ... here. * sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-power5+.c: New file. * sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_truncf.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove s_trunc-power5+, s_trunc-ppc64, s_truncf-power5+, and s_truncf-ppc64. * sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-power5+.S: Remove file. * sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-ppc64.S: Likewise. * sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-power5+.S: Likewise. * sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Likewise. * sysdep/powerpc/powerpc64/power5+/fpu/s_trunc.S: Likewise. * sysdep/powerpc/powerpc64/power5+/fpu/s_truncf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-05 00:55:50 +0000