| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On powerpc, floating-point environment macros are defined as pointers
to constants in the library that contain the bit-patterns of the
desired environment, instead of being magic constants cast to pointer
type.
For soft-float, the bit-patterns used for fenv_t are not laid out the
same as for hard-float. (e500 has a third layout used; that's not an
ABI issue because these values are only meaningful within a single
process, all of whose glibc libraries must come from the same build of
glibc.) While the __fe_dfl_env value for soft-float was appropriate
for the soft-float fenv_t representation, the other two constants had
the same bit-patterns as for hard-float. Those bit patterns had the
effect of having exceptions already raised, causing
math/test-fenv-return to fail; this patch fixes the patterns used.
(__fe_nonieee_env also had exceptions unmasked, though they should be
masked to match hard-float semantics. Since there is no separate
non-IEEE mode for soft-float, it's most appropriate for
__fe_nonieee_env to be the same as __fe_dfl_env; this patch makes it
an alias.)
Tested for powerpc-nofpu.
[BZ #17261]
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_enabled_env): Change
value to 0.
(__fe_nonieee_env): Define as an alias for __fe_dfl_env.
|
|
|
|
|
|
| |
This patch regenerates libm-test-ulps for powerpc-nofpu.
* sysdeps/powerpc/nofpu/libm-test-ulps: Regenerated.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
shlib-versions files can contain ABI lines that map triplets to a
canonical ABI name. This name was once used for various purposes
where test baseline files for different ABIs went in a single
directory; now these purposes use sysdeps files, generation of headers
which have per-ABI variants uses abi-variants and related Makefile
variables and the shlib-versions ABI names are unused. This patch
duly removes those lines and associated build system support for them.
Tested for x86_64 (both a full testsuite run and confirming the
installed shared libraries are unchanged by the patch).
* Makeconfig ($(common-objpfx)soversions.mk): Do not generate
abi-name definition.
* scripts/soversions.awk: Do not handle or generate ABI lines.
* shlib-versions: Remove ABI entries.
* sysdeps/powerpc/nofpu/shlib-versions: Remove file.
* sysdeps/x86_64/x32/shlib-versions: Remove ABI entry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes bug 16390, incorrect signs of zero results from
ldbl-128ibm atan2l, soft-float only. The problem is a longstanding
GCC bug with fabsl not being correct for signed zero for soft float,
and the fix is using -fno-builtin-fabsl as a workaround, as already
done for various other source files. Tested powerpc-nofpu.
* sysdeps/powerpc/nofpu/Makefile [$(subdir) = math]
(CFLAGS-e_atan2l.c): Use -fno-builtin-fabsl.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
sysdeps/powerpc/powerpc32/libgcc-compat.S makes certain symbols that
glibc once accidentally reexported from libgcc into compat symbols.
Where the exports were purely accidental, this is the right thing to
do. However, for powerpc-nofpu the soft-fp symbols are deliberately
exported from libc, given public versions in
sysdeps/powerpc/nofpu/Versions and used by libm in preference to the
libgcc versions that do not support the software exceptions and
rounding modes. The libc versions should also be usable by user
programs, though normally libgcc gets linked in first (meaning,
effectively, that the <fenv.h> functions are broken as regards their
expected effects on user arithmetic).
A longstanding todo item is to remove the functions in question from
libgcc (when built with recent enough glibc) - that is, remove them
from static libgcc and make them compat symbols in shared libgcc - so
that this works properly (this is one of the items mentioned at
<http://gcc.gnu.org/wiki/Software_floating_point> - parts of that page
are obviously out of date, but this item still applies). Doing this
requires first that the functions are actually available from libc for
new links, not just as compat symbols.
This patch stops the symbols in question being compat symbols for
powerpc-nofpu. The nofpu Versions entries for them are removed (the
symbols never were exported at GLIBC_2.3.2, only GLIBC_2.0, because
the compat symbols took precedence).
Tested powerpc-nofpu. The symbols are no longer compat symbols and
libm.so now properly gets undefined references to them (resolved to
libc.so) instead of the libgcc copies getting linked into libm as
before.
* sysdeps/powerpc/powerpc32/libgcc-compat.S
[_SOFT_FLOAT || __NO_FPRS__] (__fixdfdi_v_glibc20): Do not define
as a macro and a compat symbol.
[_SOFT_FLOAT || __NO_FPRS__] (__fixsfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__fixunsdfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__fixunssfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__floatdidf_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__floaddisf_v_glibc20): Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixdfdi): Do
not use .hidden.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixsfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixunsdfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixunssfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__floaddidf):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__floaddisf):
Likewise.
* sysdeps/powerpc/nofpu/Versions (libc): Remove __fixdfdi,
__fixsfdi, __fixunsdfdi, __fixunssfdi, __floatdidf and __floatdisf
from GLIBC_2.3.2.
|
|
|
|
| |
FLT_ROUNDS.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
|
| |
2005-10-03 Roland McGrath <roland@redhat.com>
* sysdeps/powerpc/nofpu: Directory removed, saved in ports repository.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
* sysdeps/powerpc/nofpu/sim-full.c (__sim_exceptions)
(__sim_disabled_exceptions, __sim_round_mode): Declare with
hidden data and nocommon.
* sysdeps/powerpc/nofpu/soft-supp.h (__sim_exceptions)
(__sim_disabled_exceptions, __sim_round_mode): Use
libc_hidden_proto.
* sysdeps/powerpc/soft-fp/sfp-machine.h (__sim_exceptions)
(__sim_disabled_exceptions, __sim_round_mode): Likewise.
|
|
|
|
|
|
|
|
| |
2003-12-04 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/fpu/fgetexcptflg.c (__fegetexceptflag): Add masking
of fenv.
* sysdeps/powerpc/nofpu/fgetexcptflg.c (__fegetexceptflag): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* sysdeps/arm/libm-test-ulps: Update.
* sysdeps/hppa/fpu/libm-test-ulps: Update.
* sysdeps/ia64/fpu/libm-test-ulps: Update.
* sysdeps/mips/fpu/libm-test-ulps: Update.
* sysdeps/powerpc/nofpu/libm-test-ulps: Update.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Update.
* sysdeps/sh/sh4/fpu/libm-test-ulps: Update.
* sysdeps/s390/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2003-02-20 Ulrich Drepper <drepper@redhat.com>
* version.h (VERSION): Bump to 2.3.2.
* elf/Makefile (distribute): Add reldep9.c, tst-array1.exp,
tst-array2.exp, tst-array4.exp, tst-array2dep.c, check-textrel.c,
and dl-sysdep.h.
* sysdeps/generic/Dist: Add sysdep-cancel.h.
* sysdeps/powerpc/nofpu/Dist: Add soft-supp.h.
* sysdeps/unix/Dist: Add s-proto-bp.S and s-proto-cancel.S.
* sysdeps/unix/sysv/linux/Dist: Add pathconf.h.
* sysdeps/unix/sysv/linux/i386/Dist: Add bp-thunk.h.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Dist: Add fe_nomask.c and
ucontext_i.h.
* Makefile (distribute): Add include/stubs-prologue.h,
include/gnu/stubs.h, scripts/merge-abilist.awk, and
scripts/extract-abilist.awk.
2002-02-20 Paolo Bonzini <bonzini@gnu.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2002-07-24 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/ioperm.c (init_iosys): Yield ENODEV
on unknown systems.
2003-02-20 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/powerpc/powerpc32/atomicity.h: Remove compiler workaround.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_NEW_PRCTL_SYSCALL): Defined for ppc32 too.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fe_nomask.c: Use prctl
if possible.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Avoid short
interprocedure branches.
* sysdeps/powerpc/soft-fp/Dist (sim-full.c, fenv_const.c): Move to...
* sysdeps/powerpc/nofpu/Dist: ...here.
* sysdeps/unix/sysv/linux/powerpc/Dist (fe_nomask.c): Move to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: ...here.
* sysdeps/unix/sysv/linux/s390/s390-64/Dist (kernel_stat.h): Delete.
* sysdeps/unix/sysv/linux/sparc/Dist (bits/utmpx.h): Delete.
* sysdeps/unix/sysv/linux/x86_64/Dist (bits/utmpx.h): Delete.
|
|
* sysdeps/alpha/elf/configure: Likewise.
* sysdeps/generic/configure: Likewise.
* sysdeps/i386/elf/configure: Likewise.
* sysdeps/ia64/elf/configure: Likewise.
* sysdeps/mach/hurd/configure: Likewise.
* sysdeps/mach/configure: Likewise.
* sysdeps/unix/configure: Likewise.
* sysdeps/unix/common/configure: Likewise.
* sysdeps/unix/sysv/aix/configure: Likewise.
* sysdeps/unix/sysv/linux/configure: Likewise.
* sysdeps/unix/sysv/linux/mips/configure: Likewise.
* sysdeps/x86_64/elf/configure: Likewise.
* config.make.in: Nix completely-soft nonsense.
* configure.in: Likewise. Under --without-fp, use nofpu subdirectory
of machine directories instead of fpu subdirectory.
* sysdeps/powerpc/soft-fp/Makefile: Remove cruft added in last change.
* sysdeps/powerpc/nofpu/Makefile: Put it in this new file instead.
* sysdeps/powerpc/soft-fp/sim-full.c: Moved to ...
* sysdeps/powerpc/nofpu/sim-full.c: ... here.
* sysdeps/powerpc/soft-fp/fraiseexcpt.c: Moved to ...
* sysdeps/powerpc/nofpu/fraiseexcpt.c: ... here.
* sysdeps/powerpc/soft-fp/fegetexcept.c: Moved to ...
* sysdeps/powerpc/nofpu/fegetexcept.c: ... here.
* sysdeps/powerpc/soft-fp/fclrexcpt.c: Moved to ...
* sysdeps/powerpc/nofpu/fclrexcpt.c: ... here.
* sysdeps/powerpc/soft-fp/ftestexcept.c: Moved to ...
* sysdeps/powerpc/nofpu/ftestexcept.c: ... here.
* sysdeps/powerpc/soft-fp/fgetexcptflg.c: Moved to ...
* sysdeps/powerpc/nofpu/fgetexcptflg.c: ... here.
* sysdeps/powerpc/soft-fp/fsetexcptflg.c: Moved to ...
* sysdeps/powerpc/nofpu/fsetexcptflg.c: ... here.
* sysdeps/powerpc/soft-fp/fedisblxcpt.c: Moved to ...
* sysdeps/powerpc/nofpu/fedisblxcpt.c: ... here.
* sysdeps/powerpc/soft-fp/feenablxcpt.c: Moved to ...
* sysdeps/powerpc/nofpu/feenablxcpt.c: ... here.
* sysdeps/powerpc/soft-fp/fegetenv.c: Moved to ...
* sysdeps/powerpc/nofpu/fegetenv.c: ... here.
* sysdeps/powerpc/soft-fp/fesetenv.c: Moved to ...
* sysdeps/powerpc/nofpu/fesetenv.c: ... here.
* sysdeps/powerpc/soft-fp/fegetround.c: Moved to ...
* sysdeps/powerpc/nofpu/fegetround.c: ... here.
* sysdeps/powerpc/soft-fp/fesetround.c: Moved to ...
* sysdeps/powerpc/nofpu/fesetround.c: ... here.
* sysdeps/powerpc/soft-fp/feupdateenv.c: Moved to ...
* sysdeps/powerpc/nofpu/feupdateenv.c: ... here.
* sysdeps/powerpc/soft-fp/feholdexcpt.c: Moved to ...
* sysdeps/powerpc/nofpu/feholdexcpt.c: ... here.
* sysdeps/powerpc/soft-fp/fenv_const.c: Moved to ...
* sysdeps/powerpc/nofpu/fenv_const.c: ... here.
* sysdeps/powerpc/soft-fp/libm-test-ulps: Moved to ...
* sysdeps/powerpc/nofpu/libm-test-ulps: ... here.
* sysdeps/powerpc/soft-fp/soft-supp.h: Moved to ...
* sysdeps/powerpc/nofpu/soft-supp.h: ... here.
* sysdeps/powerpc/soft-fp/Versions (libc: GLIBC_2.3.2): Moved to ...
* sysdeps/powerpc/nofpu/Versions: ... here, new file.
2002-10-19 Bruno Haible <bruno@clisp.org>
* sysdeps/unix/bsd/bsd4.4/freebsd/sys/sysmacros.h: New file.
2002-10-18 Roland McGrath <roland@redhat.com>
* io/Makefile (routines): Add lchmod.
* io/sys/stat.h [__USE_BSD] (lchmod): Declare it.
* sysdeps/generic/lchmod.c: New file.
* sysdeps/mach/hurd/lchmod.c: New file.
* io/Versions (libc: GLIBC_2.3.2): New set, add lchmod.
|