about summary refs log tree commit diff
path: root/sysdeps/posix
Commit message (Collapse)AuthorAgeFilesLines
* Refactor internal-signals.hAdhemerval Zanella2022-06-301-1/+1
| | | | | | | | | | | | | | | | | | The main drive is to optimize the internal usage and required size when sigset_t is embedded in other data structures. On Linux, the current supported signal set requires up to 8 bytes (16 on mips), was lower than the user defined sigset_t (128 bytes). A new internal type internal_sigset_t is added, along with the functions to operate on it similar to the ones for sigset_t. The internal-signals.h is also refactored to remove unused functions Besides small stack usage on some functions (posix_spawn, abort) it lower the struct pthread by about 120 bytes (112 on mips). Checked on x86_64-linux-gnu. Reviewed-by: Arjun Shankar <arjun@redhat.com>
* socket: Use 64 bit stat for isfdtype (BZ# 29209)Adhemerval Zanella2022-06-011-2/+2
| | | | | | This is a missing spot initially from 52a5fe70a2c77935. Checked on i686-linux-gnu.
* posix: Use 64 bit stat for fpathconf (_PC_ASYNC_IO) (BZ# 29208)Adhemerval Zanella2022-06-011-2/+2
| | | | | | This is a missing spot initially from 52a5fe70a2c77935. Checked on i686-linux-gnu.
* posix: Use 64 bit stat for posix_fallocate fallback (BZ# 29207)Adhemerval Zanella2022-06-012-4/+4
| | | | | | This is a missing spot initially from 52a5fe70a2c77935. Checked on i686-linux-gnu.
* gmon: Remove unused sprofil.c functionsAdhemerval Zanella2022-03-231-12/+0
|
* getaddrinfo: Refactor code for readabilitySiddhesh Poyarekar2022-03-231-12/+33
| | | | | | | | The close_retry goto jump is confusing and clumsy to read, so refactor the code a bit to make it easier to follow. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gai_init: Avoid jumping from if condition to its else counterpartSiddhesh Poyarekar2022-03-221-250/+248
| | | | | | | | | | | Clean up another antipattern where code flows from an if condition to its else counterpart with a goto. Most of the change in this patch is whitespace-only; a `git diff -b` ought to show the actual logic changes. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaiconf_init: Refactor some bits for readabilitySiddhesh Poyarekar2022-03-221-65/+84
| | | | | | | | Split out line processing for `label`, `precedence` and `scopev4` into separate functions instead of the gotos. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gethosts: Return EAI_MEMORY on allocation failureSiddhesh Poyarekar2022-03-221-2/+2
| | | | | | | | | All other cases of failures due to lack of memory return EAI_MEMORY, so it seems wrong to return EAI_SYSTEM here. The only reason convert_hostent_to_gaih_addrtuple could fail is on calloc failure. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: Split result generation into its own functionSiddhesh Poyarekar2022-03-221-90/+86
| | | | | | | Simplify the loop a wee bit and clean up variable names too. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: split loopback lookup into its own functionSiddhesh Poyarekar2022-03-221-65/+62
| | | | | | | | | | | | Flatten the condition nesting and replace the alloca for RET.AT/ATR with a single array LOCAL_AT[2]. This gets rid of alloca and alloca accounting. `git diff -b` is probably the best way to view this change since much of the diff is whitespace changes. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: make gethosts into a functionSiddhesh Poyarekar2022-03-221-58/+59
| | | | | | | | The macro is quite a pain to debug, so make gethosts into a function to make it easier to maintain. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: separate nss lookup loop into its own functionSiddhesh Poyarekar2022-03-221-277/+286
| | | | | Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: Split nscd lookup code into its own function.Siddhesh Poyarekar2022-03-221-114/+134
| | | | | | | | Add a new member got_ipv6 to indicate if the results have an IPv6 result and use it instead of the local got_ipv6. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: Split simple gethostbyname into its own functionSiddhesh Poyarekar2022-03-221-63/+64
| | | | | | | | Add a free_at flag in gaih_result to indicate if res.at needs to be freed by the caller. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: make numeric lookup a separate routineSiddhesh Poyarekar2022-03-221-439/+452
| | | | | | | | | | | | | Introduce the gaih_result structure and general paradigm for cleanups that follow to process the lookup request and return a result. A lookup function (like text_to_binary_address), should return an integer error code and set members of gaih_result based on what it finds. If the function does not have a result and no errors have occurred during the lookup, it should return 0 and res.at should be set to NULL, allowing a subsequent function to do the lookup until we run out of options. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: Simplify service resolutionSiddhesh Poyarekar2022-03-221-100/+78
| | | | | | | | | | Refactor the code to split out the service resolution code into a separate function. Allocate the service tuples array just once to the size of the typeproto array, thus avoiding the unnecessary pointer chasing and stack allocations. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* getaddrinfo: Fix leak with AI_ALL [BZ #28852]Siddhesh Poyarekar2022-03-221-9/+25
| | | | | | | | | | | | | Use realloc in convert_hostent_to_gaih_addrtuple and fix up pointers in the result list so that a single block is maintained for hostbyname3_r/hostbyname2_r and freed in gaih_inet. This result is never merged with any other results, since the hosts database does not permit merging. Resolves BZ #28852. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* gaih_inet: Simplify canon name resolutionSiddhesh Poyarekar2022-03-221-55/+75
| | | | | | | | | Simplify logic for allocation of canon to remove the canonbuf variable; canon now always points to an allocated block. Also pull the canon name set into a separate function. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* Simplify allocations and fix merge and continue actions [BZ #28931]Siddhesh Poyarekar2022-03-221-52/+91
| | | | | | | | | | | | | | | | | | | | | Allocations for address tuples is currently a bit confusing because of the pointer chasing through PAT, making it hard to observe the sequence in which allocations have been made. Narrow scope of the pointer chasing through PAT so that it is only used where necessary. This also tightens actions behaviour with the hosts database in getaddrinfo to comply with the manual text. The "continue" action discards previous results and the "merge" action results in an immedate lookup failure. Consequently, chaining of allocations across modules is no longer necessary, thus opening up cleanup opportunities. A test has been added that checks some combinations to ensure that they work correctly. Resolves: BZ #28931 Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: DJ Delorie <dj@redhat.com>
* getcwd: Set errno to ERANGE for size == 1 (CVE-2021-3999)Siddhesh Poyarekar2022-01-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No valid path returned by getcwd would fit into 1 byte, so reject the size early and return NULL with errno set to ERANGE. This change is prompted by CVE-2021-3999, which describes a single byte buffer underflow and overflow when all of the following conditions are met: - The buffer size (i.e. the second argument of getcwd) is 1 byte - The current working directory is too long - '/' is also mounted on the current working directory Sequence of events: - In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG because the linux kernel checks for name length before it checks buffer size - The code falls back to the generic getcwd in sysdeps/posix - In the generic func, the buf[0] is set to '\0' on line 250 - this while loop on line 262 is bypassed: while (!(thisdev == rootdev && thisino == rootino)) since the rootfs (/) is bind mounted onto the directory and the flow goes on to line 449, where it puts a '/' in the byte before the buffer. - Finally on line 458, it moves 2 bytes (the underflowed byte and the '\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow. - buf is returned on line 469 and errno is not set. This resolves BZ #28769. Reviewed-by: Andreas Schwab <schwab@linux-m68k.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Signed-off-by: Qualys Security Advisory <qsa@qualys.com> Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* hurd: Fix timer/clock_getres crash on NULL res parameterSamuel Thibault2022-01-151-2/+5
| | | | POSIX allows res to be NULL.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2022-01-0172-72/+72
| | | | | | | | | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
* posix: Remove spawni.cAdhemerval Zanella2021-09-271-343/+0
| | | | | | | | Although it provide an alternate implementation that communicates using pipe() instead of shared memory, no port uses and it adds extra burden for posix_spawn() extensions. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* Remove "Contributed by" linesSiddhesh Poyarekar2021-09-038-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* gethosts: Remove unused argument _typeSiddhesh Poyarekar2021-08-041-3/+3
| | | | The generated code is unchanged.
* gaiconf_init: Avoid double-free in label and precedence listsSiddhesh Poyarekar2021-08-031-0/+2
| | | | | | | labellist and precedencelist could get freed a second time if there are allocation failures, so set them to NULL to avoid a double-free. Reviewed-by: Arjun Shankar <arjun@redhat.com>
* posix: Add sysconf(_SC_{MIN,}SIGSTKSZ) supportSamuel Thibault2021-07-221-0/+15
|
* Define PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN)H.J. Lu2021-07-092-5/+31
| | | | | | | | | | | | | The constant PTHREAD_STACK_MIN may be too small for some processors. Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When _DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)). Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to provide a constant target specific PTHREAD_STACK_MIN value. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* posix: Add posix_spawn_file_actions_addclosefrom_npAdhemerval Zanella2021-07-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a way to close a range of file descriptors on posix_spawn as a new file action. The API is similar to the one provided by Solaris 11 [1], where the file action causes the all open file descriptors greater than or equal to input on to be closed when the new process is spawned. The function posix_spawn_file_actions_addclosefrom_np is safe to be implemented by iterating over /proc/self/fd, since the Linux spawni.c helper process does not use CLONE_FILES, so its has own file descriptor table and any failure (in /proc operation) aborts the process creation and returns an error to the caller. I am aware that this file action might be redundant to the current approach of POSIX in promoting O_CLOEXEC in more interfaces. However O_CLOEXEC is still not the default and for some specific usages, the caller needs to close all possible file descriptors to avoid them leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK jspawnhelper [2] (where OpenJDK spawns a helper process to exactly closes all file descriptors). Most likely any environment which calls functions that might open file descriptor under the hood and aim to use posix_spawn might face the same requirement. Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15. [1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html [2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
* hurd: Fix build after 52a5fe70a2Adhemerval Zanella2021-06-231-1/+2
| | | | Hurd does not support 64-bit time_t internally.
* Use 64 bit time_t stat internallyAdhemerval Zanella2021-06-227-28/+29
| | | | | | | | | | For the legacy ABI with supports 32-bit time_t it calls the 64-bit time directly, since the LFS symbols calls the 64-bit time_t ones internally. Checked on i686-linux-gnu and x86_64-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* nptl: Move pthreadP.h into sysdeps directoryFlorian Weimer2021-06-221-1/+1
| | | | | | | | This mirrors the situation on Hurd. These directories are on the include search part, so #include <pthreadP.h> works after this change on both Hurd and nptl. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* rt: Replace generic stub of shm_unlink with the posix versionFlorian Weimer2021-06-211-48/+0
| | | | | | | Result of: git mv -f sysdeps/posix/shm_unlink.c rt and manual removal of the _POSIX_MAPPED_FILES preprocessor condition. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* rt: Replace generic stub of shm_open with the posix versionFlorian Weimer2021-06-211-62/+0
| | | | | | | Result of: git mv -f sysdeps/posix/shm_open.c rt and manual removal of the _POSIX_MAPPED_FILES preprocessor condition. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Implement raise in terms of pthread_killAdhemerval Zanella2021-06-091-2/+9
| | | | | | | | | | | | | | | | Now that pthread_kill is provided by libc.so it is possible to implement the generic POSIX implementation as 'pthread_kill(pthread_self(), sig)'. For Linux implementation, pthread_kill read the targeting TID from the TCB. For raise, this it not possible because it would make raise fail when issue after vfork (where creates the resulting process has a different TID from the parent, but its TCB is not updated as for pthread_create). To make raise use pthread_kill, it is make usable from vfork by getting the target thread id through gettid syscall. Checked on x86_64-linux-gnu and aarch64-linux-gnu.
* Add C2X timespec_getresJoseph Myers2021-05-171-0/+1
| | | | | | | | | | | | | | | | | | | ISO C2X adds a timespec_getres function alongside the C11 timespec_get, with functionality similar to that of POSIX clock_getres (including allowing a NULL pointer to be passed to the function). Implement this function for glibc, similarly to the implementation of timespec_get. This includes a basic test like that of timespec_get, but no documentation in the manual, given that TIME_UTC and timespec_get aren't documented in the manual at all. The handling of 64-bit time follows that in timespec_get; people maintaining patch series for 64-bit time will need to update them accordingly (to export __timespec_getres64, redirect calls in time.h and run the test for _TIME_BITS=64). Tested for x86_64 and x86, and (previous version; only testcase differs) with build-many-glibcs.py.
* nptl: Move pthread_setcancelstate into libcFlorian Weimer2021-04-211-3/+2
| | | | | | | | No new symbol version is required because there was a forwarder. The symbol has been moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nss: fix nss_database_lookup2's alternate handling [BZ #27416]DJ Delorie2021-03-091-3/+1
| | | | | | | | | | | | | | | | | | | | __nss_database_lookup2's extra arguments were left unused in the nsswitch reloading patch set; this broke compat (default config ignored) and shadow files (secondary name ignored) which relies on these fallbacks. This patch adds in the previous behavior by correcting the initialization of the database list to reflect the fallbacks. This means that the nss_database_lookup2 interface no longer needs to be passed the fallback info, so API and callers were adjusted. Since all callers needed to be edited anyway, the calls were changed from __nss_database_lookup2 to the faster __nss_database_get. This was an intended optimization which was deferred during the initial lookup changes to avoid touching so many files. The test case verifies that compat targets work (passwd) and that the default configuration works (group). Tested on x86-64.
* linux: Require /dev/shm as the shared memory file systemFlorian Weimer2021-02-085-116/+17
| | | | | | | | | | | | | | | | | | | | | Previously, glibc would pick an arbitrary tmpfs file system from /proc/mounts if /dev/shm was not available. This could lead to an unsuitable file system being picked for the backing storage for shm_open, sem_open, and related functions. This patch introduces a new function, __shm_get_name, which builds the file name under the appropriate (now hard-coded) directory. It is called from the various shm_* and sem_* function. Unlike the SHM_GET_NAME macro it replaces, the callers handle the return values and errno updates. shm-directory.c is moved directly into the posix subdirectory because it can be implemented directly using POSIX functionality. It resides in libc because it is needed by both librt and nptl/htl. In the sem_open implementation, tmpfname is initialized directly from a string constant. This happens to remove one alloca call. Checked on x86_64-linux-gnu.
* posix: consume less entropy on tempnameAdhemerval Zanella2021-01-121-3/+14
| | | | | | | | | | The first getrandom is used only for __GT_NOCREATE, which is inherently insecure and can use the entropy as a small improvement. On the second and later attempts it might help against DoS attacks. It sync with gnulib commit 854fbb81d91f7a0f2b463e7ace2499dee2f380f2. Checked on x86_64-linux-gnu.
* posix: Sync tempname with gnulib [BZ #26648]Adhemerval Zanella2021-01-111-116/+164
| | | | | | | | It syncs with gnulib commit b1268f22f443e8e4b9e. The try_tempname_len now uses getrandom on each iteration to get entropy and only uses the clock plus ASLR as source of entropy if getrandom fails. Checked on x86_64-linux-gnu and i686-linux-gnu.
* posix: Fix return value of system if shell can not be executed [BZ #27053]Adhemerval Zanella2021-01-111-0/+4
| | | | | | | | POSIX states that system returned code for failure to execute the shell shall be as if the shell had terminated using _exit(127). This behaviour was removed with 5fb7fc96350575. Checked on x86_64-linux-gnu.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-0276-76/+76
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* nsswitch: use new internal API (callers)DJ Delorie2020-12-041-12/+7
| | | | | | Stitch new ABI and types throughout all NSS callers. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* linux: Move posix dir implementations to LinuxAdhemerval Zanella2020-10-1610-735/+0
| | | | | | | | | | | | | This generic implementation already expects a getdents API which is Linux specific. It also allows simplify it by assuming _DIRENT_HAVE_D_RECLEN and _DIRENT_HAVE_D_OFF support. The readdir are also expanded on each required implementation, futher fixes and improvements will make parametrize the implementation more complex. Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for all affected ABIs.
* Remove mknod wrapper functions, move them to symbolsAdhemerval Zanella2020-10-092-4/+2
| | | | | | | | | | | | | | | | | | | This patch removes the mknod and mknodat static wrapper and add the symbols on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to the arch-specific xstatver.h file. Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Remove stat wrapper functions, move them to exported symbolsAdhemerval Zanella2020-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64, fstatat, and fstatat64 static wrapper and add the symbol on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to a arch-specific xstatver.h file. The internal defines that redirects internals {f}stat{at} to their {f}xstat{at} counterparts are removed for Linux (!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls extra objects that makes the loader build fail otherwise (I haven't dig into why exactly). Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Remove internal usage of extensible stat functionsAdhemerval Zanella2020-09-1112-16/+15
| | | | | | | | | | | | It replaces the internal usage of __{f,l}xstat{at}{64} with the __{f,l}stat{at}{64}. It should not change the generate code since sys/stat.h explicit defines redirections to internal calls back to xstat* symbols. Checked with a build for all affected ABIs. I also check on x86_64-linux-gnu and i686-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Use LFS readdir in generic POSIX getcwd [BZ# 22899]Adhemerval Zanella2020-09-021-4/+5
| | | | Checked on x86_64-linux-gnu and i686-linux-gnu.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-30 17:28:27 +0000