about summary refs log tree commit diff
path: root/sysdeps/microblaze
Commit message (Collapse)AuthorAgeFilesLines
* Remove very old libm-test-ulps entries.Joseph Myers2017-01-201-52/+0
| | | | | | | | | | | | | | | | | | | | | | I noticed that some libm-test-ulps files still had long-obsolete entries for *_tonearest functions, which will no longer be used since functions with FE_TONEAREST explicitly set aren't tested separately from those functions with it as the default rounding mode any more. This patch removes those obsolete entries. However, as they are a sign of libm-test-ulps not having been regenerated from scratch for a long time, I strongly advise people testing on those platforms to remove / truncate the libm-test-ulps file, run "make regen-ulps" and commit the regenerated-from-scratch file. (Ideally any failures of libm tests still present after regeneration would be investigated / fixed - there are several open "math" bugs spread across these platforms - but simply regenerating from scratch improves things.) * sysdeps/hppa/fpu/libm-test-ulps: Remove *_tonearest entries. * sysdeps/ia64/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise.
* New pthread rwlock that is more scalable.Torvald Riegel2017-01-101-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This replaces the pthread rwlock with a new implementation that uses a more scalable algorithm (primarily through not using a critical section anymore to make state changes). The fast path for rdlock acquisition and release is now basically a single atomic read-modify write or CAS and a few branches. See nptl/pthread_rwlock_common.c for details. * nptl/DESIGN-rwlock.txt: Remove. * nptl/lowlevelrwlock.sym: Remove. * nptl/Makefile: Add new tests. * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, PTHREAD_RWLOCK_FUTEX_USED): New. * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new implementation. * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. (__pthread_rwlock_rdlock): Adapt. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Adapt. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Adapt. * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. (__pthread_rwlock_wrlock): Adapt. * nptl/tst-rwlock10.c: Adapt. * nptl/tst-rwlock11.c: Adapt. * nptl/tst-rwlock17.c: New file. * nptl/tst-rwlock18.c: New file. * nptl/tst-rwlock19.c: New file. * nptl/tst-rwlock2b.c: New file. * nptl/tst-rwlock8.c: Adapt. * nptl/tst-rwlock9.c: Adapt. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * nptl/nptl-printers.py (): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-rwlock-printers.py: Adapt. * nptl/test-rwlockattr-printers.c: Adapt. * nptl/test-rwlockattr-printers.py: Adapt.
* Fix MicroBlaze bits/setjmp.h for C++.Joseph Myers2017-01-041-1/+1
| | | | | | | | | | | | | | | For MicroBlaze, setjmp/check-installed-headers-cxx fails with: ../setjmp/setjmp.h:34:8: error: '__jmp_buf_tag' has a field '__jmp_buf_tag::__jmpbuf' whose type depends on the type '<unnamed struct>' which has no linkage [-Werror=subobject-linkage] This patch fixes this in the same way as for some other architectures: the struct used for the internal __jmp_buf type is given the tag __jmp_buf_internal_tag. Tested (compilation tests) with build-many-glibcs.py. * sysdeps/microblaze/bits/setjmp.h (__jmp_buf): Give struct tag __jmp_buf_internal_tag.
* Fix MicroBlaze __backtrace get_frame_size namespace (bug 21022).Joseph Myers2017-01-041-1/+1
| | | | | | | | | | | | Many linknamespace tests fail for MicroBlaze because __backtrace (as brought in by libc_fatal.c) uses an inline function get_frame_size which is not declared static. This patch fixes it to be declared static. Tested (compilation tests) with build-many-glibcs.py. [BZ #21022] * sysdeps/microblaze/backtrace.c (get_frame_size): Make static.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-0136-36/+36
|
* New condvar implementation that provides stronger ordering guarantees.Torvald Riegel2016-12-311-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new implementation for condition variables, required after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In essence, we need to be stricter in which waiters a signal or broadcast is required to wake up; this couldn't be solved using the old algorithm. ISO C++ made a similar clarification, so this also fixes a bug in current libstdc++, for example. We can't use the old algorithm anymore because futexes do not guarantee to wake in FIFO order. Thus, when we wake, we can't simply let any waiter grab a signal, but we need to ensure that one of the waiters happening before the signal is woken up. This is something the previous algorithm violated (see bug 13165). There's another issue specific to condvars: ABA issues on the underlying futexes. Unlike mutexes that have just three states, or semaphores that have no tokens or a limited number of them, the state of a condvar is the *order* of the waiters. A waiter on a semaphore can grab a token whenever one is available; a condvar waiter must only consume a signal if it is eligible to do so as determined by the relative order of the waiter and the signal. Therefore, this new algorithm maintains two groups of waiters: Those eligible to consume signals (G1), and those that have to wait until previous waiters have consumed signals (G2). Once G1 is empty, G2 becomes the new G1. 64b counters are used to avoid ABA issues. This condvar doesn't yet use a requeue optimization (ie, on a broadcast, waking just one thread and requeueing all others on the futex of the mutex supplied by the program). I don't think doing the requeue is necessarily the right approach (but I haven't done real measurements yet): * If a program expects to wake many threads at the same time and make that scalable, a condvar isn't great anyway because of how it requires waiters to operate mutually exclusive (due to the mutex usage). Thus, a thundering herd problem is a scalability problem with or without the optimization. Using something like a semaphore might be more appropriate in such a case. * The scalability problem is actually at the mutex side; the condvar could help (and it tries to with the requeue optimization), but it should be the mutex who decides how that is done, and whether it is done at all. * Forcing all but one waiter into the kernel-side wait queue of the mutex prevents/avoids the use of lock elision on the mutex. Thus, it prevents the only cure against the underlying scalability problem inherent to condvars. * If condvars use short critical sections (ie, hold the mutex just to check a binary flag or such), which they should do ideally, then forcing all those waiter to proceed serially with kernel-based hand-off (ie, futex ops in the mutex' contended state, via the futex wait queues) will be less efficient than just letting a scalable mutex implementation take care of it. Our current mutex impl doesn't employ spinning at all, but if critical sections are short, spinning can be much better. * Doing the requeue stuff requires all waiters to always drive the mutex into the contended state. This leads to each waiter having to call futex_wake after lock release, even if this wouldn't be necessary. [BZ #13165] * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to use new algorithm. * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. (__condvar_confirm_wakeup, __condvar_cancel_waiting, __condvar_cleanup_waiting, __condvar_dec_grefs, __pthread_cond_wait_common): New. (__condvar_cleanup): Remove. * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): Likewise. * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. * nptl/tst-cond1.c: Add comment. * nptl/tst-cond20.c (do_test): Adapt. * nptl/tst-cond22.c (do_test): Likewise. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt structure. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. (COND_CLOCK_BITS): Adapt. * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, __PTHREAD_COND_SHARED_MASK): New. * nptl/nptl-printers.py (CLOCK_IDS): Remove. (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-cond-printers.py: Adapt. * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, cond_compat_check_and_clear): Adapt. * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_timedwait): ... and move here. * nptl/DESIGN-condvar.txt: Remove file. * nptl/lowlevelcond.sym: Likewise. * nptl/pthread_cond_timedwait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
* Remove cached PID/TID in cloneAdhemerval Zanella2016-11-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
* nptl: Document the reason why __kind in pthread_mutex_t is part of the ABIFlorian Weimer2016-11-071-1/+1
|
* Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).Joseph Myers2016-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
* Add femode_t functions.Joseph Myers2016-09-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Remove atomic_compare_and_exchange_bool_rel.Torvald Riegel2016-06-241-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | atomic_compare_and_exchange_bool_rel and catomic_compare_and_exchange_bool_rel are removed and replaced with the new C11-like atomic_compare_exchange_weak_release. The concurrent code in nscd/cache.c has not been reviewed yet, so this patch does not add detailed comments. * nscd/cache.c (cache_add): Use new C11-like atomic operation instead of atomic_compare_and_exchange_bool_rel. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * include/atomic.h (atomic_compare_and_exchange_bool_rel, catomic_compare_and_exchange_bool_rel): Remove. * sysdeps/aarch64/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/alpha/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/arm/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/mips/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/tile/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise.
* elf: Consolidate machine-agnostic DTV definitions in <dl-dtv.h>Florian Weimer2016-06-202-14/+1
| | | | | Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were repeated for all architectures using DTVs.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-0436-36/+36
|
* math: add LDBL_CLASSIFY_COMPAT supportChris Metcalf2015-12-031-0/+4
| | | | | | | | | | | | | | | | | If a platform does not define "long-double-fcts = yes" in its Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed headers, it will currently create exported symbols for __finitel, __isinfl, and __isnanl that can't be reached from userspace by correct use of the finite(), isinf(), or isnan() macros in <math.h>. To avoid this situation, by default for such platforms we now no longer export these symbols, thus causing appropriate link-time errors. However, for platforms that previously exported these symbols, we continue to do so as compat symbols; this is enabled by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform. For tile, remove the now-unnecessary exports of those functions from libc and libm.
* Fix math_private.h multiple include guards.Joseph Myers2015-11-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various math_private.h headers are guarded by "#ifndef _MATH_PRIVATE_H", but never define the macro. Nothing else defines the macro either (the generic math_private.h that they include defines a different macro, _MATH_PRIVATE_H_), so those guards are ineffective. With the recent inclusion of s_sin.c in s_sincos.c, this breaks the build for MIPS, since the build of s_sincos.c ends up including <math_private.h> twice and the MIPS version defines inline functions such as libc_feholdexcept_mips, without a separate fenv_private.h header with its own guards such as some architectures have. This patch fixes all the problem headers to use architecture-specific guard macro names, and to define those macros in the headers they guard, just as some architectures already do. Tested for x86 (testsuite, and that installed shared libraries are unchanged by the patch), and for mips64 (that it fixes the build). * sysdeps/arm/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!ARM_MATH_PRIVATE_H]. [!ARM_MATH_PRIVATE_H] (ARM_MATH_PRIVATE_H): Define macro. * sysdeps/hppa/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!HPPA_MATH_PRIVATE_H]. [!HPPA_MATH_PRIVATE_H] (HPPA_MATH_PRIVATE_H): Define macro. * sysdeps/i386/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!I386_MATH_PRIVATE_H]. [!I386_MATH_PRIVATE_H] (I386_MATH_PRIVATE_H): Define macro. * sysdeps/m68k/m680x0/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!M68K_MATH_PRIVATE_H]. [!M68K_MATH_PRIVATE_H] (M68K_MATH_PRIVATE_H): Define macro. * sysdeps/microblaze/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!MICROBLAZE_MATH_PRIVATE_H]. [!MICROBLAZE_MATH_PRIVATE_H] (MICROBLAZE_MATH_PRIVATE_H): Define macro. * sysdeps/mips/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!MIPS_MATH_PRIVATE_H]. [!MIPS_MATH_PRIVATE_H] (MIPS_MATH_PRIVATE_H): Define macro. * sysdeps/nios2/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!NIO2_MATH_PRIVATE_H]. [!NIO2_MATH_PRIVATE_H] (NIO2_MATH_PRIVATE_H): Define macro. * sysdeps/tile/math_private.h [!_MATH_PRIVATE_H]: Change guard to [!TILE_MATH_PRIVATE_H]. [!TILE_MATH_PRIVATE_H] (TILE_MATH_PRIVATE_H): Define macro.
* Use soft-fp fma for MicroBlaze (bug 13304).Joseph Myers2015-09-253-0/+3
| | | | | | | | | | | | | | | | Systems without floating-point exceptions and rounding modes should use the soft-fp versions of fmaf and fma, not the sysdeps/ieee754 versions that rely on setting rounding to zero and testing for the "inexact" exception; this has been noted on <https://sourceware.org/glibc/wiki/PortStatus> for some time. This patch makes MicroBlaze use the soft-fp files; sfp-machine.h is made to include the nios2 version of sfp-machine.h which seems sufficiently generic for 32-bit systems. [BZ #13304] * sysdeps/microblaze/s_fma.c: New file. * sysdeps/microblaze/s_fmaf.c: Likewise. * sysdeps/microblaze/sfp-machine.h: Likewise.
* Move bits/atomic.h to atomic-machine.h (bug 14912).Joseph Myers2015-09-111-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/atomic.h to atomic-machine.h to follow that convention. This is the only change in this series that needs to change the filename rather than simply removing a directory level (because both atomic.h and bits/atomic.h exist at present). Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * sysdeps/aarch64/bits/atomic.h: Move to ... * sysdeps/aarch64/atomic-machine.h: ...here. (_AARCH64_BITS_ATOMIC_H): Rename macro to _AARCH64_ATOMIC_MACHINE_H. * sysdeps/alpha/bits/atomic.h: Move to ... * sysdeps/alpha/atomic-machine.h: ...here. * sysdeps/arm/bits/atomic.h: Move to ... * sysdeps/arm/atomic-machine.h: ...here. Update comments. * bits/atomic.h: Move to ... * sysdeps/generic/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/i386/bits/atomic.h: Move to ... * sysdeps/i386/atomic-machine.h: ...here. * sysdeps/ia64/bits/atomic.h: Move to ... * sysdeps/ia64/atomic-machine.h: ...here. * sysdeps/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ... * sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here. * sysdeps/microblaze/bits/atomic.h: Move to ... * sysdeps/microblaze/atomic-machine.h: ...here. * sysdeps/mips/bits/atomic.h: Move to ... * sysdeps/mips/atomic-machine.h: ...here. (_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H. * sysdeps/powerpc/bits/atomic.h: Move to ... * sysdeps/powerpc/atomic-machine.h: ...here. Update comments. * sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update comments. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/s390/bits/atomic.h: Move to ... * sysdeps/s390/atomic-machine.h: ...here. * sysdeps/sparc/sparc32/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here. * sysdeps/sparc/sparc64/bits/atomic.h: Move to ... * sysdeps/sparc/sparc64/atomic-machine.h: ...here. * sysdeps/tile/bits/atomic.h: Move to ... * sysdeps/tile/atomic-machine.h: ...here. * sysdeps/tile/tilegx/bits/atomic.h: Move to ... * sysdeps/tile/tilegx/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/tile/tilepro/bits/atomic.h: Move to ... * sysdeps/tile/tilepro/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include <sysdeps/arm/atomic-machine.h> instead of <sysdeps/arm/bits/atomic.h>. * sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here. (_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here. * sysdeps/x86_64/bits/atomic.h: Move to ... * sysdeps/x86_64/atomic-machine.h: ...here. * include/atomic.h: Include <atomic-machine.h> instead of <bits/atomic.h>.
* Fix BZ #18084 -- backtrace (..., 0) dumps core on x86.Paul Pluzhnikov2015-08-151-0/+3
| | | | Other architectures also had bugs, or did unnecessary work.
* Replace ELF_RTYPE_CLASS_NOCOPY with ELF_RTYPE_CLASS_COPYH.J. Lu2015-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELF_RTYPE_CLASS_NOCOPY in comments is a typo. It should be ELF_RTYPE_CLASS_COPY. [BZ #18082] * sysdeps/alpha/dl-machine.h (elf_machine_type_class): Replace ELF_RTYPE_CLASS_NOCOPY with ELF_RTYPE_CLASS_COPY in comments. * sysdeps/arm/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_type_class): Likewise.
* MicroBlaze: Avoid pointer to integer conversion warningDavid Holsgrove2015-01-091-2/+2
| | | | | | | | | 2015-01-06 David Holsgrove <david.holsgrove@xilinx.com> * sysdeps/microblaze/jmpbuf-unwind.h (_jmpbuf_sp): Declare SP as void pointer and cast to uintptr_t. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
* MicroBlaze: Fix volatile-register-var warning in READ_THREAD_POINTERDavid Holsgrove2015-01-091-8/+3
| | | | | | | | | | | | Resolves warning: 'optimization may eliminate reads and/or writes to register variables' 2015-01-06 David Holsgrove <david.holsgrove@xilinx.com> * sysdeps/microblaze/nptl/tls.h: Remove inline __microblaze_get_thread_area and update READ_THREAD_POINTER. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
* MicroBlaze: Fix integer-pointer conversion warningDavid Holsgrove2015-01-091-1/+1
| | | | | | | | | 2015-01-06 David Holsgrove <david.holsgrove@xilinx.com> * sysdeps/microblaze/nptl/tls.h (TLS_INIT_TP): Use NULL instead of 0. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-0236-36/+36
|
* Fix libm feraiseexcept namespace (bug 17723).Joseph Myers2014-12-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various C90 and UNIX98 libm functions call feraiseexcept, which is not in those standards. This causes linknamespace test failures - except on x86 / x86_64, where feraiseexcept is inline (for the relevant constant arguments) in bits/fenv.h. This patch fixes this by making those functions call __feraiseexcept instead. All changes are applied to all architectures rather than considering the possibility that some might not be needed in some cases (e.g. x86) as it seems most maintainable to keep architectures consistent. Where __feraiseexcept does not exist, it is added, with feraiseexcept made a weak alias; where it is a strong alias, it is made weak. libm_hidden_def / libm_hidden_proto are used with __feraiseexcept (this might in some cases improve code generation for existing calls to __feraiseexcept in some code on some architectures). Where there are dummy feraiseexcept macros (on architectures without floating-point exceptions support, to avoid compile errors from references to undefined FE_* macros), corresponding dummy __feraiseexcept macros are added. And on x86, to ensure __feraiseexcept calls still get inlined, the inline function in bits/fenv.h is refactored so that most of it can be reused in an inline __feraiseexcept in a separate include/bits/fenv.h. Calls are changed in C90/UNIX98 functions, but generally not in functions missing from those standards. They are also changed in libc_fe* functions (on the basis that those might be used in any libm function), and in feupdateenv (on the same basis - may be used, via default libc_*, in any libm function - of course feupdateenv will need changing to __feupdateenv in a subsequent patch to make that fully namespace-clean). No __feraiseexcept is added corresponding to the feraiseexcept in powerpc bits/fenvinline.h, because that macro definition is conditional on !defined __NO_MATH_INLINES, and glibc libm is built with -D__NO_MATH_INLINES, so changing internal calls to use __feraiseexcept should make no difference. Tested for x86_64 (testsuite; the only change in disassembly of installed shared libraries is a slight code reordering in clog10, of no apparent significance). Also tested for MIPS, where (in the configuration tested) it eliminates math.h linknamespace failures for n32 and n64 (some for o32 remain because of other issues). [BZ #17723] * include/fenv.h (__feraiseexcept): Use libm_hidden_proto. * math/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def. * sysdeps/aarch64/fpu/fraiseexcpt.c (feraiseexcept): Rename to __feraiseexcept and define as weak alias of __feraiseexcept. Use libm_hidden_weak. * sysdeps/arm/fraiseexcpt.c (feraiseexcept): Likewise. * sysdeps/hppa/fpu/fraiseexcpt.c (feraiseexcept): Likewise. * sysdeps/i386/fpu/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def. * sysdeps/ia64/fpu/fraiseexcpt.c (feraiseexcept): Rename to __feraiseexcept and define as weak alias of __feraiseexcept. Use libm_hidden_weak. * sysdeps/m68k/coldfire/fpu/fraiseexcpt.c (feraiseexcept): Likewise. * sysdeps/microblaze/math_private.h (__feraiseexcept): New macro. * sysdeps/mips/fpu/fraiseexcpt.c (feraiseexcept): Rename to __feraiseexcept and define as weak alias of __feraiseexcept. Use libm_hidden_weak. * sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def. * sysdeps/powerpc/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise. * sysdeps/s390/fpu/fraiseexcpt.c (feraiseexcept): Rename to __feraiseexcept and define as weak alias of __feraiseexcept. Use libm_hidden_weak. * sysdeps/sh/sh4/fpu/fraiseexcpt.c (feraiseexcept): Likewise. * sysdeps/sparc/fpu/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def. * sysdeps/tile/math_private.h (__feraiseexcept): New macro. * sysdeps/unix/sysv/linux/alpha/fraiseexcpt.S (__feraiseexcept): Use libm_hidden_def. * sysdeps/x86_64/fpu/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def. (feraiseexcept): Define as weak not strong alias. Use libm_hidden_weak. * sysdeps/x86/fpu/bits/fenv.h (__feraiseexcept_invalid_divbyzero): New inline function. Factored out of ... (feraiseexcept): ... here. Use __feraiseexcept_invalid_divbyzero. * sysdeps/x86/fpu/include/bits/fenv.h: New file. * math/e_scalb.c (invalid_fn): Call __feraiseexcept instead of feraiseexcept. * math/w_acos.c (__acos): Likewise. * math/w_asin.c (__asin): Likewise. * math/w_ilogb.c (__ilogb): Likewise. * math/w_j0.c (y0): Likewise. * math/w_j1.c (y1): Likewise. * math/w_jn.c (yn): Likewise. * math/w_log.c (__log): Likewise. * math/w_log10.c (__log10): Likewise. * sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/aarch64/fpu/math_private.h (libc_feupdateenv_test_aarch64): Likewise. * sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/arm/fenv_private.h (libc_feupdateenv_test_vfp): Likewise. * sysdeps/arm/feupdateenv.c (feupdateenv): Likewise. * sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Likewise. * sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
* microblaze: 64b atomic operations are not supported.Torvald Riegel2014-11-211-1/+1
|
* Add arch-specific configuration for C11 atomics support.Torvald Riegel2014-11-201-0/+3
| | | | | | | | This sets __HAVE_64B_ATOMICS if provided. It also sets USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the __atomic* builtins (aarch64, mips partially) or if this has been tested (x86_64); otherwise, this is set to false so that C11 atomics will be based on the existing atomic operations.
* Don't use INTDEF/INTUSE with _dl_init (bug 14132).Joseph Myers2014-11-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this patch eliminates its use for _dl_init. Since _dl_init was already declared with hidden visibility, creating a second hidden alias for it was completely pointless, so this patch replaces all uses of _dl_init_internal with plain _dl_init instead of using hidden_proto / hidden_def (which are only needed when you want a hidden alias for a non-hidden symbol; it's quite possible there are cases where they are used but don't need to be because the symbol in question is not part of the public ABI and is only used within a single library, so using attributes_hidden instead would suffice). Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. [BZ #14132] * elf/dl-init.c (_dl_init): Don't use INTDEF. * sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead of _dl_init_internal. * sysdeps/alpha/dl-machine.h (RTLD_START): Likewise. * sysdeps/arm/dl-machine.h (RTLD_START): Likewise. * sysdeps/hppa/dl-machine.h (RTLD_START): Likewise. * sysdeps/i386/dl-machine.h (RTLD_START): Likewise. * sysdeps/ia64/dl-machine.h (RTLD_START): Likewise. * sysdeps/m68k/dl-machine.h (RTLD_START): Likewise. * sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise. * sysdeps/mips/dl-machine.h (RTLD_START): Likewise. * sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise. * sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise. * sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise. * sysdeps/sh/dl-machine.h (RTLD_START): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise. * sysdeps/tile/dl-start.S (_start): Likewise. * sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise. * sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
* Move architecture shlib-versions files to Linux-specific directories.Joseph Myers2014-07-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various architectures have files such as sysdeps/<arch>/shlib-versions whose contents are in fact entirely Linux-specific, relating only to the symbol / shared library versions for the port to Linux on that architecture, when any future port to a different OS on that architecture would use the symbol version of the glibc release it goes in, as standard for new ports. This patch moves such files under sysdeps/unix/sysv/linux/, merging in the contents of sysdeps/<arch>/nptl/shlib-versions in the process. The only bits not moved are those relating to libgcc_s versions, which don't appear OS-specific in the same way that glibc's symbol versions so. It deliberately does not change the regular expressions given for matching configurations in each file; some match only Linux although not Linux-specific, or match other OSes although Linux-specific. It is with a view to at least the following further cleanups: * Move architecture-specific content from the toplevel shlib-versions and nptl/shlib-versions into sysdeps shlib-versions files, so eliminating another difference between ex-ports and non-ex-ports architectures. * Likewise, for OS-specific content in shlib-versions files. * At that point, the first field in shlib-versions files (the regular expression matching a configuration triplet) should be redundant, so eliminate that field and leave shlib-versions selection working purely on a sysdeps basis (with limited use of %ifdef in shlib-versions files when needed) rather than having its own separate mechanism to select what configuration information is relevant. * Move the build of gnu/lib-names.h to a similar mechanism to that used for gnu/stubs.h (each library build installing a version of the header specifically for that build), so we can eliminate the duplication of soname information in the makefiles and get it purely from shlib-versions files again. There may be other cleanups possible as well (in particular, I'm not sure that all cases where the same "Earliest symbol set" information is repeated for many different libraries actually should need to repeat it rather than specifying it just once for DEFAULT for the given configuration, and separately specifying any non-default choices of soname). Tested x86_64 that the installed shared libraries are unchanged by this patch. * sysdeps/aarch64/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/aarch64/shlib-versions: ... here. * sysdeps/alpha/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/alpha/shlib-versions: ... here. * sysdeps/arm/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/arm/shlib-versions: ... here. * sysdeps/hppa/shlib-versions: Move all contents except for libgcc_s entry to ... * sysdeps/unix/sysv/linux/hppa/shlib-versions: ... here. Merge in entry from ... * sysdeps/hppa/nptl/shlib-versions: ... here. Remove file. * sysdeps/ia64/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/ia64/shlib-versions: ... here. Merge in entry from ... * sysdeps/ia64/nptl/shlib-versions: ... here. Remove file. * sysdeps/m68k/coldfire/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: ... here. * sysdeps/microblaze/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/microblaze/shlib-versions: ... here. * sysdeps/mips/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/mips/shlib-versions: ... here. Merge in entry from ... * sysdeps/mips/nptl/shlib-versions: ... here. Remove file. * sysdeps/tile/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/tile/shlib-versions: ... here. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Merge in entry from ... * sysdeps/x86_64/64/shlib-versions: ... here. Remove file. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Merge in entry from ... * sysdeps/x86_64/x32/shlib-versions: ... here. Remove file.
* MicroBlaze: Move NPTL public headers to sysdeps/microblaze/nptl/.Roland McGrath2014-07-012-0/+213
|
* MicroBlaze: Define TLS_DEFINE_INIT_TPRoland McGrath2014-07-011-0/+2
|
* Fix Wundef warning for ELF_MACHINE_NO_RELASiddhesh Poyarekar2014-06-261-0/+1
| | | | | | | This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested only on x86_64 to verify that the sources before and after are identical except for two instructions that pass the current line number in dl-machine.h to assert_fail.
* Remove second argument from TLS_INIT_TP macroAndreas Schwab2014-05-271-1/+1
|
* Clean up __exit_thread.Roland McGrath2014-05-131-5/+0
|
* Compile with -Wundef.Roland McGrath2014-03-141-0/+1
|
* Don't include individual test ulps in libm-test-ulps.Joseph Myers2014-03-051-5075/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As recently discussed <https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it doesn't seem particularly useful for libm-test-ulps files to contain huge amounts of data on ulps for individual tests; just the global maximum observed ulps for each function, together with the verification of exceptions, errno and special results such as infinities and NaNs for each test, suffices to verify that a function's behavior on the given test inputs is within the expected accuracy. Removing this data reduces source tree churn caused by updates to these files when libm tests are added, and reduces the frequency with which testsuite additions actually need libm-test-ulps changes at all. Accordingly, this patch removes that data, so that individual tests get checked against the global bounds for the given function and only generate an error if those are exceeded. Tested x86_64 (including verifying that if an ulps value is artificially reduced, the tests do indeed fail as they should and "make regen-ulps" generates the expected changes). * math/libm-test.inc (struct ulp_data): Don't refer to ulps for individual tests in comment. (libm-test-ulps.h): Don't refer to test_ulps in #include comment. (prev_max_error): New variable. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (compare_ulp_data): Don't refer to test names in comment. (find_test_ulps): Remove function. (find_function_ulps): Likewise. (find_complex_function_ulps): Likewise. (init_max_error): Take function name as argument. Look up ulps for that function. (print_ulps): Remove function. (print_max_error): Use prev_max_error instead of calling find_function_ulps. (print_complex_max_error): Use prev_real_max_error and prev_imag_max_error instead of calling find_complex_function_ulps. (check_float_internal): Take max_ulp parameter instead of calling find_test_ulps. Don't call print_ulps. (check_float): Update call to check_float_internal. (check_complex): Update calls to check_float_internal. (START): Pass argument to init_max_error. * math/gen-libm-test.pl (%results): Don't include "kind" information. (parse_ulps): Don't handle ulps of individual tests. (print_ulps_file): Likewise. (output_ulps): Likewise. * math/README.libm-test: Update. * manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of individual tests. * sysdeps/aarch64/libm-test-ulps: Remove individual test ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/ia64/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
* [MicroBlaze]: Move MicroBlaze from ports to sysdeps.David Holsgrove2014-02-1742-0/+7783
2014-02-17 David Holsgrove <david.holsgrove@xilinx.com> * sysdeps/microblaze: Move directory from ports/sysdeps/microblaze. * sysdeps/unix/sysv/linux/microblaze: Move directory from ports/sysdeps/unix/sysv/linux/microblaze. * README: Add missing listing for microblaze*-*-linux-gnu. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>