about summary refs log tree commit diff
path: root/sysdeps/mach
Commit message (Collapse)AuthorAgeFilesLines
* io: Refactor close_range and closefromAdhemerval Zanella2021-11-244-36/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that Hurd implementis both close_range and closefrom (f2c996597d), we can make close_range() a base ABI, and make the default closefrom() implementation on top of close_range(). The generic closefrom() implementation based on __getdtablesize() is moved to generic close_range(). On Linux it will be overriden by the auto-generation syscall while on Hurd it will be a system specific implementation. The closefrom() now calls close_range() and __closefrom_fallback(). Since on Hurd close_range() does not fail, __closefrom_fallback() is an empty static inline function set by__ASSUME_CLOSE_RANGE. The __ASSUME_CLOSE_RANGE also allows optimize Linux __closefrom_fallback() implementation when --enable-kernel=5.9 or higher is used. Finally the Linux specific tst-close_range.c is moved to io and enabled as default. The Linuxism and CLOSE_RANGE_UNSHARE are guarded so it can be built for Hurd (I have not actually test it). Checked on x86_64-linux-gnu, i686-linux-gnu, and with a i686-gnu build.
* setjmp: Replace jmp_buf-macros.h with jmp_buf-macros.symAdhemerval Zanella2021-11-221-6/+0
| | | | | | | | | | | | It requires less boilerplate code for newer ports. The _Static_assert checks from internal setjmp are moved to its own internal test since setjmp.h is included early by multiple headers (to generate rtld-sizes.sym). The riscv jmp_buf-macros.h check is also redundant, it is already done by riscv configure.ac. Checked with a build for the affected architectures.
* Fix build a chec failures after b05fae4d8e34Adhemerval Zanella2021-11-091-1/+0
| | | | | | | | | | The include cleanup on dl-minimal.c removed too much for some targets. Also for Hurd, __sbrk is removed from localplt.data now that tunables allocated memory through mmap. Checked with a build for all affected architectures.
* hurd: Remove unused __libc_close_rangeSamuel Thibault2021-11-071-1/+0
| | | | That was just cargo-culted.
* hurd: Implement close_range and closefromSergey Bugaev2021-11-076-1/+135
| | | | | | | | | | | | | | | | | | The close_range () function implements the same API as the Linux and FreeBSD syscalls. It operates atomically and reliably. The specified upper bound is clamped to the actual size of the file descriptor table; it is expected that the most common use case is with last = UINT_MAX. Like in the Linux syscall, it is also possible to pass the CLOSE_RANGE_CLOEXEC flag to mark the file descriptors in the range cloexec instead of acually closing them. Also, add a Hurd version of the closefrom () function. Since unlike on Linux, close_range () cannot fail due to being unuspported by the running kernel, a fallback implementation is never necessary. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20211106153524.82700-1-bugaevc@gmail.com>
* String: Add support for __memcmpeq() ABI on all targetsNoah Goldstein2021-10-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | No bug. This commit adds support for __memcmpeq() as a new ABI for all targets. In this commit __memcmpeq() is implemented only as an alias to the corresponding targets memcmp() implementation. __memcmpeq() is added as a new symbol starting with GLIBC_2.35 and defined in string.h with comments explaining its behavior. Basic tests that it is callable and works where added in string/tester.c As discussed in the proposal "Add new ABI '__memcmpeq()' to libc" __memcmpeq() is essentially a reserved namespace for bcmp(). The means is shares the same specifications as memcmp() except the return value for non-equal byte sequences is any non-zero value. This is less strict than memcmp()'s return value specification and can be better optimized when a boolean return is all that is needed. __memcmpeq() is meant to only be called by compilers if they can prove that the return value of a memcmp() call is only used for its boolean value. All tests in string/tester.c passed. As well build succeeds on x86_64-linux-gnu target.
* hurd if_index: Explicitly use AF_INET for if index discoverySamuel Thibault2021-10-181-3/+3
| | | | | | | 5bf07e1b3a74 ("Linux: Simplify __opensock and fix race condition [BZ #28353]") made __opensock try NETLINK then UNIX then INET. On the Hurd, only INET knows about network interfaces, so better actually specify that in if_index.
* hurd: Fix intr-msg parameter/stack kludgeSamuel Thibault2021-10-181-10/+39
| | | | | | | | | | | INTR_MSG_TRAP was tinkering with esp to make it point to _hurd_intr_rpc_mach_msg's parameters, and notably use (&msg)[-1] which is meaningless in C. Instead, just push the parameters on the stack, which also avoids leaving local variables of _hurd_intr_rpc_mach_msg below esp. We now also properly express that OPTION and TIMEOUT may be updated during the trap call.
* Add fmaximum, fminimum functionsJoseph Myers2021-09-281-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds new <math.h> functions for floating-point maximum and minimum, corresponding to the new operations that were added in IEEE 754-2019 because of concerns about the old operations not being associative in the presence of signaling NaNs. fmaximum and fminimum handle NaNs like most <math.h> functions (any NaN argument means the result is a quiet NaN). fmaximum_num and fminimum_num handle both quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if one argument is a number and the other is a NaN, return the number), but still raise "invalid" for a signaling NaN argument, making them exceptions to the normal rule that a function with a floating-point result raising "invalid" also returns a quiet NaN. fmaximum_mag, fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding functions returning the argument with greatest or least absolute value. All these functions also treat +0 as greater than -0. There are also corresponding <tgmath.h> type-generic macros. Add these functions to glibc. The implementations use type-generic templates based on those for fmax, fmin, fmaxmag and fminmag, and test inputs are based on those for those functions with appropriate adjustments to the expected results. The RISC-V maintainers might wish to add optimized versions of fmaximum_num and fminimum_num (for float and double), since RISC-V (F extension version 2.2 and later) provides instructions corresponding to those functions - though it might be at least as useful to add architecture-independent built-in functions to GCC and teach the RISC-V back end to expand those functions inline, which is what you generally want for functions that can be implemented with a single instruction. Tested for x86_64 and x86, and with build-many-glibcs.py.
* misc: Add __get_nprocs_schedAdhemerval Zanella2021-09-271-0/+6
| | | | | | | | | | | This is an internal function meant to return the number of avaliable processor where the process can scheduled, different than the __get_nprocs which returns a the system available online CPU. The Linux implementation currently only calls __get_nprocs(), which in tuns calls sched_getaffinity. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* htl: make pthread_sigstate read/write set/oset outside sigstate sectionSamuel Thibault2021-09-261-5/+11
| | | | so that if a segfault occurs, the handler can run fine.
* Add narrowing fma functionsJoseph Myers2021-09-221-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
* elf: Remove THREAD_GSCOPE_IN_TCBSergey Bugaev2021-09-161-2/+0
| | | | | | | | | All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all support for !THREAD_GSCOPE_IN_TCB, along with the definition itself. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-4-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* htl: Reimplement GSCOPESergey Bugaev2021-09-162-20/+21
| | | | | | | | | | | | | | | | This is a new implementation of GSCOPE which largely mirrors its NPTL counterpart. Same as in NPTL, instead of a global flag shared between threads, there is now a per-thread GSCOPE flag stored in each thread's TCB. This makes entering and exiting a GSCOPE faster at the expense of making THREAD_GSCOPE_WAIT () slower. The largest win is the elimination of many redundant gsync_wake () RPC calls; previously, even simplest programs would make dozens of fully redundant gsync_wake () calls. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-3-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* htl: Move thread table to ld.soSergey Bugaev2021-09-163-3/+3
| | | | | | | | | | | The next commit is going to introduce a new implementation of THREAD_GSCOPE_WAIT which needs to access the list of threads. Since it must be usable from the dynamic laoder, we have to move the symbols for the list of threads into the loader. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-2-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* mach lll_lock/unlock: Explicitly request private lockingSamuel Thibault2021-09-151-2/+2
| | | | 0 was actually LLL_PRIVATE, so this does not actually change the code.
* Add narrowing square root functionsJoseph Myers2021-09-101-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
* Remove "Contributed by" linesSiddhesh Poyarekar2021-09-039-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* hurd msync: Drop bogus testSamuel Thibault2021-08-311-3/+0
| | | | | MS_SYNC is actually 0, so we cannot test that both MS_SYNC and MS_ASYNC are set.
* hurd: Fix typo in msyncSamuel Thibault2021-08-311-1/+1
| | | | == has higher priority than &
* hurd: Remove old test-err_np.c fileSamuel Thibault2021-08-231-4/+0
| | | | This is not referenced any more and includes a non-existing file.
* hurd: Drop fmh kludgeSamuel Thibault2021-08-161-35/+0
| | | | | | Gnumach's 0650a4ee30e3 implements support for high bits being set in the mask parameter of vm_map. This allows to remove the fmh kludge that was masking away the address range by mapping a dumb area there.
* hurd mmap: Reduce the requested max vmprotSergey Bugaev2021-08-111-4/+18
| | | | | | | When the memory object is read-only, the kernel would be right in refusing max vmprot containing VM_PROT_WRITE. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* hurd mmap: Factorize MAP_SHARED flag checkSergey Bugaev2021-08-111-12/+10
| | | | Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* hurd: _Fork: unlock malloc before calling fork child hooksSamuel Thibault2021-07-271-0/+1
| | | | | The setitimer fork hook, fork_itimer, needs to call malloc inside __mach_setup_tls, so we need to unlock malloc before calling it.
* Move malloc_{g,s}et_state to libc_malloc_debugSiddhesh Poyarekar2021-07-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | | These deprecated functions are only safe to call from __malloc_initialize_hook and as a result, are not useful in the general case. Move the implementations to libc_malloc_debug so that existing binaries that need it will now have to preload the debug DSO to work correctly. This also allows simplification of the core malloc implementation by dropping all the undumping support code that was added to make malloc_set_state work. One known breakage is that of ancient emacs binaries that depend on this. They will now crash when running with this libc. With LD_BIND_NOW=1, it will terminate immediately because of not being able to find malloc_set_state but with lazy binding it will crash in unpredictable ways. It will need a preloaded libc_malloc_debug.so so that its initialization hook is executed to allow its malloc implementation to work properly. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* glibc.malloc.check: Wean away from malloc hooksSiddhesh Poyarekar2021-07-221-0/+7
| | | | | | | | | | | | | | | | | | The malloc-check debugging feature is tightly integrated into glibc malloc, so thanks to an idea from Florian Weimer, much of the malloc implementation has been moved into libc_malloc_debug.so to support malloc-check. Due to this, glibc malloc and malloc-check can no longer work together; they use altogether different (but identical) structures for heap management. This should not make a difference though since the malloc check hook is not disabled anywhere. malloc_set_state does, but it does so early enough that it shouldn't cause any problems. The malloc check tunable is now in the debug DSO and has no effect when the DSO is not preloaded. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* mtrace: Wean away from malloc hooksSiddhesh Poyarekar2021-07-222-1/+2
| | | | | | | | | | | | | Wean mtrace away from the malloc hooks and move them into the debug DSO. Split the API away from the implementation so that we can add the API to libc.so as well as libc_malloc_debug.so, with the libc implementations being empty. Update localplt data since memalign no longer has any callers after this change. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* mcheck: Wean away from malloc hooks [BZ #23489]Siddhesh Poyarekar2021-07-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Split the mcheck implementation into the debugging hooks and API so that the API can be replicated in libc and libc_malloc_debug.so. The libc APIs always result in failure. The mcheck implementation has also been moved entirely into libc_malloc_debug.so and with it, all of the hook initialization code can now be moved into the debug library. Now the initialization can be done independently of libc internals. With this patch, libc_malloc_debug.so can no longer be used with older libcs, which is not its goal anyway. tst-vfork3 breaks due to this since it spawns shell scripts, which in turn execute using the system glibc. Move the test to tests-container so that only the built glibc is used. This move also fixes bugs in the mcheck version of memalign and realloc, thus allowing removal of the tests from tests-mcheck exclusion list. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Move malloc hooks into a compat DSOSiddhesh Poyarekar2021-07-222-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Remove all malloc hook uses from core malloc functions and move it into a new library libc_malloc_debug.so. With this, the hooks now no longer have any effect on the core library. libc_malloc_debug.so is a malloc interposer that needs to be preloaded to get hooks functionality back so that the debugging features that depend on the hooks, i.e. malloc-check, mcheck and mtrace work again. Without the preloaded DSO these debugging features will be nops. These features will be ported away from hooks in subsequent patches. Similarly, legacy applications that need hooks functionality need to preload libc_malloc_debug.so. The symbols exported by libc_malloc_debug.so are maintained at exactly the same version as libc.so. Finally, static binaries will no longer be able to use malloc debugging features since they cannot preload the debugging DSO. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* hurd: Add support for spawn_do_closefromSamuel Thibault2021-07-192-1/+38
|
* resolv: Move res_query functions into libcFlorian Weimer2021-07-192-6/+12
| | | | | | | | | | | | | | | This switches to public symbols without __ prefixes, due to improved namespace management in glibc. The script was used with --no-new-version to move the symbols __res_nquery, __res_nquerydomain, __res_nsearch, __res_query, __res_querydomain, __res_search, res_query, res_querydomain, res_search. The public symbols res_nquery, res_nquerydomain, res_nsearch, res_ownok, res_query, res_querydomain, res_search were added with make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move res_mkquery, res_nmkquery into libcFlorian Weimer2021-07-192-2/+4
| | | | | | | | | | | | | This switches to public symbols without __ prefixes, due to improved namespace management in glibc. The symbols res_mkquery, __res_mkquery, __res_nmkquery were moved with the script (using --no-new-version). res_mkquery@@GLIBC_2.34, res_nmkquery@@GLIBC_2.34 were added using make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move res_send, res_nsend into libcFlorian Weimer2021-07-192-2/+4
| | | | | | | | | | | Switch to public symbols without __ prefix (due to improved namespace management). __res_send, __res_nsend were moved using the script (with --no-new-version). res_send@@GLIBC_2.34 and res_nsend@@GLIBC_2.34 were added using make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Rename res_comp.c to res-name-checking.c and move into libcFlorian Weimer2021-07-192-4/+8
| | | | | | | | | | | | | | | This reflects what the remaining functions in the file do. The __res_dnok, __res_hnok, __res_mailok, __res_ownok were moved with the script, using --no-new-version, and turned into compat symbols. __libc_res_dnok@@GLIBC_PRIVATE and __libc_res_hnok@@GLIBC_PRIVATE are added for internal use, to avoid accidentally binding to compatibility symbols. The new public symbols res_dnok, res_hnok, res_mailok, res_ownok were added using make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move dn_skipname to its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | | | | | | | And reformat it to GNU style. dn_skipname is used outside glibc, so do not deprecate it, and export it as dn_skipname (not __dn_skipname). Due to internal users, provide a __libc_dn_skipname alias, and keep __dn_skipname as a pure compatibility symbol. __dn_skipname@GLIBC_2.0 was moved using the script, and dn_skipname@@GLIBC_2.34 was added using make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move dn_comp to its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | | | | | | | And reformat it to GNU style. dn_comp is used in various programs, so keep it as a non-deprecated symbol. Switch to dn_comp (not __dn_comp) for the ABI name. There are no internal users, so interposition is not a problem. The __dn_comp symbol was moved with scripts/move-symbol-to-libc.py --no-new-version. dn_comp@@GLIBC_2.34 was added with make update-all-abi. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move dn_expand to its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | | | | | | | | | | And reformat to GNU style. This switches back to the dn_expand name for the ABI symbol and turns __dn_expand into a compatibility symbol. With the improved namespace management in current glibc, it is no longer necessary to use a private namespace symbol. To avoid old code binding to a GLIBC_PRIVATE symbol by accident, use __libc_dn_expand for the internal symbol name. The symbols dn_expand, __dnexpand were moved using scripts/move-symbol-to-libc.py, followed by an adjustment to make dn_expand the only GLIBC_2.34 symbol. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_compress into its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | And reformat to GNU style. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_pack into its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | And reformat to GNU style, and eliminate the labellen function. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_pton into its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | And reformat to GNU style, and eliminate the digits variable. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_uncompress into its own file and into libcFlorian Weimer2021-07-192-1/+2
| | | | | | | | | | And reformat to GNU style. Check for negative error returns (instead of -1). The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_skip to its own file and into libc (bug 28091)Florian Weimer2021-07-192-1/+2
| | | | | | | | | | And reformat to GNU style. Avoid out-of-bounds pointer arithmetic. This also results in a fix of bug 28091 due to the additional packet length checks. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
* resolv: Move ns_name_unpack to its own file and into libcFlorian Weimer2021-07-152-1/+2
| | | | | | | | | | Reformat to GNU style. Avoid out-of-bounds buffer arithmetic. Eliminate the labellen function. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* resolv: Move ns_name_ntop to its own file and into libcFlorian Weimer2021-07-152-1/+2
| | | | | | | | | | | | Reformat to GNU style. Avoid out-of-bounds pointer arithmetic (e.g., use eom - dn < 2 instead of dn + 1 >= eom). Inline the labellen function and fold the compression pointer check into the length check (l >= 64). Assume ASCII encoding. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* socket: Add hidden prototype for setsockoptFlorian Weimer2021-07-151-1/+1
| | | | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* htl: Let libc call __pthread_mutex_{,try,un}lockSamuel Thibault2021-07-133-0/+3
| | | | | Now that NPTL was moved to libc, libc makes internal __pthread calls, so htl has to expose them internally.
* hurd _Fork: Drop duplicate malloc_fork_lock callsSamuel Thibault2021-07-111-3/+0
| | | | | | This was put in __libc_fork by c32c868ab8b2 ("posix: Add _Fork [BZ #4737]") so we need to avoid locking them again in _Fork called by __libc_lock, otherwise we deadlock.
* posix: Add posix_spawn_file_actions_addclosefrom_npAdhemerval Zanella2021-07-082-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a way to close a range of file descriptors on posix_spawn as a new file action. The API is similar to the one provided by Solaris 11 [1], where the file action causes the all open file descriptors greater than or equal to input on to be closed when the new process is spawned. The function posix_spawn_file_actions_addclosefrom_np is safe to be implemented by iterating over /proc/self/fd, since the Linux spawni.c helper process does not use CLONE_FILES, so its has own file descriptor table and any failure (in /proc operation) aborts the process creation and returns an error to the caller. I am aware that this file action might be redundant to the current approach of POSIX in promoting O_CLOEXEC in more interfaces. However O_CLOEXEC is still not the default and for some specific usages, the caller needs to close all possible file descriptors to avoid them leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK jspawnhelper [2] (where OpenJDK spawns a helper process to exactly closes all file descriptors). Most likely any environment which calls functions that might open file descriptor under the hood and aim to use posix_spawn might face the same requirement. Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15. [1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html [2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
* io: Add closefrom [BZ #10353]Adhemerval Zanella2021-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function closes all open file descriptors greater than or equal to input argument. Negative values are clamped to 0, i.e, it will close all file descriptors. As indicated by the bug report, this is a common symbol provided by different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although its has inherent issues with not taking in consideration internal libc file descriptors (such as syslog), this is also a common feature used in multiple projects [1][2][3][4][5]. The Linux fallback implementation iterates over /proc and close all file descriptors sequentially. Although it was raised the questioning whether getdents on /proc/self/fd might return disjointed entries when file descriptor are closed; it does not seems the case on my testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy is used on different projects [1][2][3][5]. Also, the interface is set a fail-safe meaning that a failure in the fallback results in a process abort. Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15. [1] https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/fd-util.c#L217 [2] https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/src/lxc/start.c#L236 [3] https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d867f8/Modules/_posixsubprocess.c#L220 [4] https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5e451/src/libstd/sys/unix/process2.rs#L303-L308 [5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-03 05:08:05 +0000