about summary refs log tree commit diff
path: root/sysdeps/mach
Commit message (Collapse)AuthorAgeFilesLines
* hurd: Remove the ecx kludgeSergey Bugaev2023-03-022-43/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "We don't need it any more" The INTR_MSG_TRAP macro in intr-msg.h used to play little trick with the stack pointer: it would temporarily save the "real" stack pointer into ecx, while setting esp to point to just before the message buffer, and then invoke the mach_msg trap. This way, INTR_MSG_TRAP reused the on-stack arguments laid out for the containing call of _hurd_intr_rpc_mach_msg (), passing them to the mach_msg trap directly. This, however, required special support in hurdsig.c and trampoline.c, since they now had to recognize when a thread is inside the piece of code where esp doesn't point to the real tip of the stack, and handle this situation specially. Commit 1d20f33ff4fb634310f27493b7b87d0b20f4a0b0 has removed the actual temporary change of esp by actually re-pushing mach_msg arguments onto the stack, and popping them back at end. It did not, however, deal with the rest of "the ecx kludge" code in other files, resulting in potential crashes if a signal arrives in the middle of pushing arguments onto the stack. Fix that by removing "the ecx kludge". Instead, when we want a thread to skip the RPC, but cannot make just make it jump to after the trap since it's not done adjusting the stack yet, set the SYSRETURN register to MACH_SEND_INTERRUPTED (as we do anyway), and rely on the thread itself for detecting this case and skipping the RPC. This simplifies things somewhat and paves the way for a future x86_64 port of this code. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230301162355.426887-1-bugaevc@gmail.com>
* hurd: Implement TLS for x86_64Sergey Bugaev2023-02-272-1/+228
| | | | | Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230221211932.296459-4-bugaevc@gmail.com>
* htl: Make pthread_mutex_t pointer-alignedSergey Bugaev2023-02-271-5/+8
| | | | | | | | This is for future-proofing. On i386, it is 4-byte aligned anyway, but on x86_64, we want it 8-byte aligned, not 4-byte aligned. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230214173722.428140-4-bugaevc@gmail.com>
* hurd: Generalize init-first.c to support x86_64Sergey Bugaev2023-02-241-0/+6
| | | | | Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230223151436.49180-2-bugaevc@gmail.com>
* hurd: Simplify init-first.c furtherSergey Bugaev2023-02-244-140/+68
| | | | | | | | This drops all of the return address rewriting kludges. The only remaining hack is the jump out of a call stack while adjusting the stack pointer. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
* hurd: Mark some audit tests as unsupportedSamuel Thibault2023-02-241-0/+10
| | | | They hang the testsuite.
* htl: Mark select loop test as unsupportedSamuel Thibault2023-02-241-0/+6
| | | | It overflows pflocal and doesn't manage to terminate.
* hurd: Mark RLIMIT_AS tests as unsupportedSamuel Thibault2023-02-241-0/+11
| | | | Otherwise they put the system on its knees.
* Define PC, SP and SYSRETURN for hurd x86_64Flavio Cruz2023-02-201-3/+9
| | | | | | Moved thread_state.h to x86 directory since we only need to customize those 3 definitions. Message-Id: <Y+x4xrsDMkAomncO@jupiter.tail36e24.ts.net>
* hurd: Simplify init-first.c a bitSergey Bugaev2023-02-201-16/+7
| | | | | | | | And make it a bit more 64-bit ready. This is in preparation to moving this file into x86/ Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230218203717.373211-6-bugaevc@gmail.com>
* hurd: Make timer_t pointer-sizedSergey Bugaev2023-02-201-1/+1
| | | | | | | | This ensures that a timer_t value can be cast to struct timer_node * and back. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230218203717.373211-5-bugaevc@gmail.com>
* hurd: Fix xattr function return typeSergey Bugaev2023-02-205-5/+5
| | | | | | | They all return int, not size_t. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230218203717.373211-4-bugaevc@gmail.com>
* hurd: Use proper integer typesSergey Bugaev2023-02-205-7/+11
| | | | | | | | Fix a few more cases of build errors caused by mismatched types. This is a continuation of f4315054b46d5e58b44a709a51943fb73f846afb. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230218203717.373211-3-bugaevc@gmail.com>
* hurd: Move thread state manipulation into _hurd_tls_new ()Sergey Bugaev2023-02-201-5/+20
| | | | | | | This is going to be done differently on x86_64. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230218203717.373211-2-bugaevc@gmail.com>
* [hurd] Fix i686 build breakage caused by 4fedebc91108Flavio Cruz2023-02-173-4/+4
| | | | Message-Id: <Y+8bqZzYTl7WaUm7@jupiter.tail36e24.ts.net>
* C2x strtol binary constant handlingJoseph Myers2023-02-161-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2x adds binary integer constants starting with 0b or 0B, and supports those constants in strtol-family functions when the base passed is 0 or 2. Implement that strtol support for glibc. As discussed at <https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>, this is incompatible with previous C standard versions, in that such an input string starting with 0b or 0B was previously required to be parsed as 0 (with the rest of the string unprocessed). Thus, as proposed there, this patch adds 20 new __isoc23_* functions with appropriate header redirection support. This patch does *not* do anything about scanf %i (which will need 12 new functions per long double variant, so 12, 24 or 36 depending on the glibc configuration), instead leaving that for a future patch. The function names would remain as __isoc23_* even if C2x ends up published in 2024 rather than 2023. Making this change leads to the question of what should happen to internal uses of these functions in glibc and its tests. The header redirection (which applies for _GNU_SOURCE or any other feature test macros enabling C2x features) has the effect of redirecting internal uses but without those uses then ending up at a hidden alias (see the comment in include/stdio.h about interaction with libc_hidden_proto). It seems desirable for the default for internal uses to be the same versions used by normal code using _GNU_SOURCE, so rather than doing anything to disable that redirection, similar macro definitions to those in include/stdio.h are added to the include/ headers for the new functions. Given that the default for uses in glibc is for the redirections to apply, the next question is whether the C2x semantics are correct for all those uses. Uses with the base fixed to 10, 16 or any other value other than 0 or 2 can be ignored. I think this leaves the following internal uses to consider (an important consideration for review of this patch will be both whether this list is complete and whether my conclusions on all entries in it are correct): benchtests/bench-malloc-simple.c benchtests/bench-string.h elf/sotruss-lib.c math/libm-test-support.c nptl/perf.c nscd/nscd_conf.c nss/nss_files/files-parse.c posix/tst-fnmatch.c posix/wordexp.c resolv/inet_addr.c rt/tst-mqueue7.c soft-fp/testit.c stdlib/fmtmsg.c support/support_test_main.c support/test-container.c sysdeps/pthread/tst-mutex10.c I think all of these places are OK with the new semantics, except for resolv/inet_addr.c, where the POSIX semantics of inet_addr do not allow for binary constants; thus, I changed that file (to use __strtoul_internal, whose semantics are unchanged) and added a test for this case. In the case of posix/wordexp.c I think accepting binary constants is OK since POSIX explicitly allows additional forms of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is not in POSIX so again I think accepting binary constants is OK. Functions such as __strtol_internal, which are only exported for compatibility with old binaries from when those were used in inline functions in headers, have unchanged semantics; the __*_l_internal versions (purely internal to libc and not exported) have a new argument to specify whether to accept binary constants. As well as for the standard functions, the header redirection also applies to the *_l versions (GNU extensions), and to legacy functions such as strtoq, to avoid confusing inconsistency (the *q functions redirect to __isoc23_*ll rather than needing their own __isoc23_* entry points). For the functions that are only declared with _GNU_SOURCE, this means the old versions are no longer available for normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro is used to control the redirections in the headers, and cases in glibc that wish to avoid the redirections - the function implementations themselves and the tests of the old versions of the GNU functions - then undefine and redefine that macro to allow the old versions to be accessed. (There would of course be greater complexity should we wish to make any of the old versions into compat symbols / avoid them being defined at all for new glibc ABIs.) strtol_l.c has some similarity to strtol.c in gnulib, but has already diverged some way (and isn't listed at all at https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c and strtoul.c); I haven't made any attempts at gnulib compatibility in the changes to that file. I note incidentally that inttypes.h and wchar.h are missing the __nonnull present on declarations of this family of functions in stdlib.h; I didn't make any changes in that regard for the new declarations added.
* mach: undef ENTRY2Sergey Bugaev2023-02-141-0/+1
| | | | | | | | This macro from Mach headers conflicts with how sysdeps/x86_64/multiarch/strcmp-sse2.S expects it to be defined. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230214173722.428140-3-bugaevc@gmail.com>
* hurd: i386 TLS tweaksSergey Bugaev2023-02-141-13/+35
| | | | | | | | | | | | | | * Micro-optimize TLS access using GCC's native support for gs-based addressing when available; * Just use THREAD_GETMEM and THREAD_SETMEM instead of more inline assembly; * Sync tcbhead_t layout with NPTL, in particular update/fix __private_ss offset; * Statically assert that the two offsets that are a part of ABI are what we expect them to be. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230214173722.428140-2-bugaevc@gmail.com>
* hurd, htl: Add some x86_64-specific codeSergey Bugaev2023-02-122-0/+49
| | | | | Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230212111044.610942-12-bugaevc@gmail.com>
* hurd: Set up the basic tree for x86_64-gnuSergey Bugaev2023-02-126-2/+10
| | | | | | | And move pt-setup.c to the generic x86 tree. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230212111044.610942-11-bugaevc@gmail.com>
* mach: Look for mach_i386.defs on x86_64 tooSergey Bugaev2023-02-122-6/+6
| | | | | Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230212111044.610942-10-bugaevc@gmail.com>
* hurd: Use mach_msg_type_number_t where appropriateSergey Bugaev2023-02-123-4/+6
| | | | | | | | | | It has been decided that on x86_64, mach_msg_type_number_t stays 32-bit. Therefore, it's not possible to use mach_msg_type_number_t interchangeably with size_t, in particular this breaks when a pointer to a variable is passed to a MIG routine. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230212111044.610942-3-bugaevc@gmail.com>
* hurd: Refactor readlinkat()Sergey Bugaev2023-02-121-23/+32
| | | | | | | | | Make the code flow more linear using early returns where possible. This makes it so much easier to reason about what runs on error / successful code paths. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230212111044.610942-2-bugaevc@gmail.com>
* hurd: Fix unwinding over INTR_MSG_TRAPSamuel Thibault2023-02-091-13/+0
| | | | | | | | | | We used to use .cfi_adjust_cfa_offset around %esp manipulation asm instructions to fix unwinding, but when building glibc with -fno-omit-frame-pointer this is bogus since in that case %ebp is the CFA and does not move. Instead, let's force -fno-omit-frame-pointer when building intr-msg.c so that %ebp can always be used and no .cfi_adjust_cfa_offset is needed.
* Move RETURN_TO to x86/sysdep.h and implement x86_64 version.Flavio Cruz2023-02-052-34/+17
| | | | Message-Id: <Y99nfeBrTubZL9oi@jupiter.tail36e24.ts.net>
* Remove sysdeps/mach/i386/machine-sp.hFlavio Cruz2023-02-021-30/+0
| | | | | | | This file is not used today since we end up using sysdeps/i386/htl/machine-sp.h. Getting the stack pointer does not need to be hurd specific and can go into sysdeps/<arch>. Message-Id: <Y9tpWs2WOgE/Duiq@jupiter.tail36e24.ts.net>
* hurd: Move some i386 bits to x86Samuel Thibault2023-02-0210-107/+129
| | | | As they will actually be usable on x86_64 too.
* hurd: Implement SHM_ANONSergey Bugaev2023-02-011-0/+25
| | | | | | | | | | | | | | | This adds a special SHM_ANON value that can be passed into shm_open () in place of a name. When called in this way, shm_open () will create a new anonymous shared memory file. The file will be created in the same way that other shared memory files are created (i.e., under /dev/shm/), except that it is not given a name and therefore cannot be reached from the file system, nor by other calls to shm_open (). This is accomplished by utilizing O_TMPFILE. This is intended to be compatible with FreeBSD's API of the same name. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230130125216.6254-4-bugaevc@gmail.com>
* hurd: Implement O_TMPFILESergey Bugaev2023-02-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a flag that causes open () to create a new, unnamed file in the same filesystem as the given directory. The file descriptor can be simply used in the creating process as a temporary file, or shared with children processes via fork (), or sent over a Unix socket. The file can be left anonymous, in which case it will be deleted from the backing file system once all copies of the file descriptor are closed, or given a permanent name with a linkat () call, such as the following: int fd = open ("/tmp", O_TMPFILE | O_RDWR, 0700); /* Do something with the file... */ linkat (fd, "", AT_FDCWD, "/tmp/filename", AT_EMPTY_PATH); In between creating the file and linking it to the file system, it is possible to set the file content, mode, ownership, author, and other attributes, so that the file visibly appears in the file system (perhaps replacing another file) atomically, with all of its attributes already set up. The Hurd support for O_TMPFILE directly exposes the dir_mkfile RPC to user programs. Previously, dir_mkfile was used by glibc internally, in particular for implementing tmpfile (), but not exposed to user programs through a Unix-level API. O_TMPFILE was initially introduced by Linux. This implementation is intended to be compatible with the Linux implementation, except that the O_EXCL flag is not given the special meaning when used together with O_TMPFILE, unlike on Linux. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20230130125216.6254-3-bugaevc@gmail.com>
* Regenerate configure.Carlos O'Donell2023-01-311-1/+1
| | | | | | | Run using vanilla upstream autoconf 2.69. Minor whitespace change to sysdeps/loongarch/configure and sysdeps/mach/configure, and nothing else.
* Update copyright dates with scripts/update-copyrightsJoseph Myers2023-01-06394-394/+394
|
* hurd getcwd: Fix memory leak on errorSamuel Thibault2023-01-021-0/+2
|
* hurd fcntl: Make LOCKED macro more robustSamuel Thibault2023-01-021-2/+3
|
* hurd: Make dl-sysdep __sbrk check __vm_allocate callSamuel Thibault2023-01-021-1/+2
| | | | | The caller won't be able to progress, but better crash than use random addr.
* htl: Drop duplicate check in __pthread_stack_allocSamuel Thibault2023-01-021-3/+0
|
* mach: Drop remnants of old_CFLAGSSamuel Thibault2022-12-192-8/+0
|
* mach: Fix passing -ffreestanding when checking for gnumach headersSamuel Thibault2022-12-192-12/+6
| | | | | | 8b8c768e3c70 ("Force use of -ffreestanding when checking for gnumach headers") was passing -ffreestanding to CFLAGS only, but headers checks are performed with the preprocessor, so we rather need to pass it to CPPFLAGS.
* Force use of -ffreestanding when checking for gnumach headersFlavio Cruz2022-12-192-1/+13
| | | | | | | Without this ./configure assumes that we are in a fully hosted environment, which might not be the case. After this patch, we can rely on the freestanding header files provided by GCC such as stdint.h. Message-Id: <Y5+0V9osFc/zXMq0@mars>
* hurd: Make getrandom cache the server portSergey Bugaev2022-12-021-15/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, getrandom would, each time it's called, traverse the file system to find /dev/urandom, fetch some random data from it, then throw away that port. This is quite slow, while calls to getrandom are genrally expected to be fast. Additionally, this means that getrandom can not work when /dev/urandom is unavailable, such as inside a chroot that lacks one. User programs expect calls to getrandom to work inside a chroot if they first call getrandom outside of the chroot. In particular, this is known to break the OpenSSH server, and in that case the issue is exacerbated by the API of arc4random, which prevents it from properly reporting errors, forcing glibc to abort on failure. This causes sshd to just die once it tries to generate a random number. Caching the random server port, in a manner similar to how socket server ports are cached, both improves the performance and works around the chroot issue. Tested on i686-gnu with the following program: pthread_barrier_t barrier; void *worker(void*) { pthread_barrier_wait(&barrier); uint32_t sum = 0; for (int i = 0; i < 10000; i++) { sum += arc4random(); } return (void *)(uintptr_t) sum; } int main() { pthread_t threads[THREAD_COUNT]; pthread_barrier_init(&barrier, NULL, THREAD_COUNT); for (int i = 0; i < THREAD_COUNT; i++) { pthread_create(&threads[i], NULL, worker, NULL); } for (int i = 0; i < THREAD_COUNT; i++) { void *retval; pthread_join(threads[i], &retval); printf("Thread %i: %lu\n", i, (unsigned long)(uintptr_t) retval); } In my totally unscientific benchmark, with this patch, this completes in about 7 seconds, whereas previously it took about 50 seconds. This program was also used to test that getrandom () doesn't explode if the random server dies, but instead reopens the /dev/urandom anew. I have also verified that with this patch, OpenSSH can once again accept connections properly. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20221202135558.23781-1-bugaevc@gmail.com>
* hurd: Add sigtimedwait and sigwaitinfo supportSamuel Thibault2022-11-073-112/+207
| | | | | This simply needed to add the timeout parameter to mach_msg, and copy information from struct hurd_signal_detail.
* elf: Introduce <dl-call_tls_init_tp.h> and call_tls_init_tp (bug 29249)Florian Weimer2022-11-031-5/+5
| | | | | | | | This makes it more likely that the compiler can compute the strlen argument in _startup_fatal at compile time, which is required to avoid a dependency on strlen this early during process startup. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf: Rework exception handling in the dynamic loader [BZ #25486]Florian Weimer2022-11-032-5/+3
| | | | | | | | | | | | | | | | | | | | | | | The old exception handling implementation used function interposition to replace the dynamic loader implementation (no TLS support) with the libc implementation (TLS support). This results in problems if the link order between the dynamic loader and libc is reversed (bug 25486). The new implementation moves the entire implementation of the exception handling functions back into the dynamic loader, using THREAD_GETMEM and THREAD_SETMEM for thread-local data support. These depends on Hurd support for these macros, added in commit b65a82e4e757c1e6cb7073916 ("hurd: Add THREAD_GET/SETMEM/_NC"). One small obstacle is that the exception handling facilities are used before the TCB has been set up, so a check is needed if the TCB is available. If not, a regular global variable is used to store the exception handling information. Also rename dl-error.c to dl-catch.c, to avoid confusion with the dlerror function. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Use PTR_MANGLE and PTR_DEMANGLE unconditionally in C sourcesFlorian Weimer2022-10-181-2/+0
| | | | | | | | | | | | | | | | | In the future, this will result in a compilation failure if the macros are unexpectedly undefined (due to header inclusion ordering or header inclusion missing altogether). Assembler sources are more difficult to convert. In many cases, they are hand-optimized for the mangling and no-mangling variants, which is why they are not converted. sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c are special: These are C sources, but most of the implementation is in assembler, so the PTR_DEMANGLE macro has to be undefined in some cases, to match the assembler style. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Introduce <pointer_guard.h>, extracted from <sysdep.h>Florian Weimer2022-10-183-1/+3
| | | | | | | | | | | | | | This allows us to define a generic no-op version of PTR_MANGLE and PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE unconditionally in C sources, avoiding an unintended loss of hardening due to missing include files or unlucky header inclusion ordering. In i386 and x86_64, we can avoid a <tls.h> dependency in the C code by using the computed constant from <tcb-offsets.h>. <sysdep.h> no longer includes these definitions, so there is no cyclic dependency anymore when computing the <tcb-offsets.h> constants. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Regenerate sysdeps/mach/hurd/bits/errno.hJoseph Myers2022-10-051-0/+1
| | | | | | | This addition to the list of source headers in sysdeps/mach/hurd/bits/errno.h appears in the source tree after build-many-glibcs.py runs, I'm guessing resulting from gnumach commit c566ad85a2d6728ebc8ec0f461a3b35df300e96e.
* malloc: Do not clobber errno on __getrandom_nocancel (BZ #29624)Adhemerval Zanella2022-09-301-2/+10
| | | | | | | | | | Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This requires emulate the semantic for hurd call (so __arc4random_buf uses the fallback). Checked on x86_64-linux-gnu. Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
* hurd: Fix typoSamuel Thibault2022-09-281-1/+1
|
* hurd: Increase SOMAXCONN to 4096Samuel Thibault2022-09-271-1/+1
| | | | Notably fakeroot-tcp may introduce a lot of parallel connections.
* hurd: Fix SIOCADD/DELRT ioctlsSamuel Thibault2022-09-211-2/+2
| | | | The hurd network stack uses struct ifrtreq rather than ortentry.
* hurd: Drop struct rtentry and in6_rtmsgSamuel Thibault2022-09-211-38/+0
| | | | These were cargo-culted, they are not used at all in Hurd interfaces.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-03 08:39:47 +0000