about summary refs log tree commit diff
path: root/sysdeps/ieee754
Commit message (Collapse)AuthorAgeFilesLines
* Increase internal precision of ldbl-128ibm decimal printf [BZ #19853]Paul E. Murphy2016-03-311-7/+18
| | | | | | | | | | | | | | When the signs differ, the precision of the conversion sometimes drops below 106 bits. This strategy is identical to the hexadecimal variant. I've refactored tst-sprintf3 to enable testing a value with more than 30 significant digits in order to demonstrate this failure and its solution. Additionally, this implicitly fixes a typo in the shift quantities when subtracting from the high mantissa to compute the difference.
* Fix ldbl-128ibm nearbyintl in non-default rounding modes (bug 19790).Joseph Myers2016-03-092-107/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of nearbyintl uses logic that only works in round-to-nearest mode. This contrasts with rintl, which works in all rounding modes. Now, arguably nearbyintl could simply be aliased to rintl, given that spurious "inexact" is generally allowed for ldbl-128ibm, even for the underlying arithmetic operations. But given that the only point of nearbyintl is to avoid "inexact", this patch follows the more conservative approach of adding conditionals to the rintl implementation to make it suitable for use to implement nearbyintl, then builds it for nearbyintl with USE_AS_NEARBYINTL defined. The test test-nearbyint-except-2 shows up issues when traps on "inexact" are enabled, which turn out to be problems with the powerpc fenv_private.h implementation (two functions that should disable exception traps potentially failing to do so in some cases); this patch duly fixes that as well (I don't see any other existing cases where this would be user-visible; there isn't much use of *_NOEX, *hold* etc. in libm that requires exceptions to be discarded and not trapped on). Tested for powerpc. [BZ #19790] * sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL] (rintl): Define as macro. [USE_AS_NEARBYINTL] (__rintl): Likewise. (__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead of fesetround. Ensure results are evaluated before end of scope. * sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define USE_AS_NEARBYINTL and include s_rintl.c. * sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc): Disable exception traps in new environment. (libc_feholdsetround_ppc_ctx): Likewise.
* Fix ldbl-128ibm remainderl equality test for zero low part (bug 19677).Joseph Myers2016-03-086-60/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of remainderl has logic resulting in incorrect tests for equality of the absolute values of the arguments in the case of zero low parts. If the low parts are both zero but with different signs, this can wrongly cause equal arguments to be treated as different, resulting in turn in incorrect signs of zero result in nondefault rounding modes arising from the subtractions done when the arguments are not equal. This patch fixes the logic to convert -0 low parts into +0 before the comparison (remquo already has separate logic to deal with signs of zero results, so doesn't need such a change). Tests are added for remainderl and remquol similar to that for fmodl, and based on a refactoring of it, since the bug depends on low parts which should not be relied upon in tests not setting the representation explicitly (although in fact the bug shows up in test-ldouble with current GCC). Tested for powerpc. [BZ #19677] * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Put zero low parts in canonical form. * sysdeps/ieee754/ldbl-128ibm/test-fmodrem-ldbl-128ibm.c: New file. Based on sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c. * sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: Replace with wrapper round test-fmodrem-ldbl-128ibm.c. * sysdeps/ieee754/ldbl-128ibm/test-remainderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/test-remquol-ldbl-128ibm.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add test-remainderl-ldbl-128ibm and test-remquol-ldbl-128ibm.
* Fix ldbl-128ibm nextafterl, nexttowardl sign of zero result (bug 19678).Joseph Myers2016-02-191-0/+3
| | | | | | | | | | | | | | The ldbl-128ibm implementation of nextafterl / nexttowardl returns -0 in FE_DOWNWARD mode when taking the next value below the least positive subnormal, when it should return +0. This patch fixes it to check explicitly for this case. Tested for powerpc. [BZ #19678] * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Ensure +0.0 is returned when taking the next value below the least positive value.
* Fix ldbl-128ibm powl overflow handling (bug 19674).Joseph Myers2016-02-191-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of powl has some problems in the case of overflow or underflow, which are mainly visible in non-default rounding modes. * When overflow or underflow is detected early, the correct sign of an overflowing or underflowing result is not allowed for. This is mostly hidden in the default rounding mode by the errno-setting wrappers recomputing the result (except in non-default error-handling modes such as -lieee), but visible in other rounding modes where a result that is not zero or infinity causes the wrappers not to do the recomputation. * The final scaling is done before the sign is incorporated in the result, but should be done afterwards for correct overflowing and underflowing results in directed rounding modes. This patch fixes those problems. Tested for powerpc. [BZ #19674] * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Include sign in overflowing and underflowing results when overflow or underflow is detected early. Include sign in result before rather than after scaling.
* Fix ldbl-128ibm remainderl, remquol equality tests (bug 19603).Joseph Myers2016-02-192-0/+4
| | | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementations of remainderl and remquol have logic resulting in incorrect tests for equality of the absolute values of the arguments. Equality is tested based on the integer representations of the high and low parts, with the sign bit masked off the high part - but when this changes the sign of the high part, the sign of the low part needs to be changed as well, and failure to do this means arguments are wrongly treated as equal when they are not. This patch fixes the logic to adjust signs of low parts as needed. Tested for powerpc. [BZ #19603] * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Adjust sign of integer version of low part when taking absolute value of high part. * sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise. * math/libm-test.inc (remainder_test_data): Add another test. (remquo_test_data): Likewise.
* Fix ldbl-128ibm fmodl handling of equal arguments with low part zero (bug ↵Joseph Myers2016-02-183-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 19602). The ldbl-128ibm implementation of fmodl has logic to detect when the first argument has absolute value less than or equal to the second. This logic is only correct for nonzero low parts; if the high parts are equal and the low parts are zero, then the signs of the low parts (which have no semantic effect on the value of the long double number) can result in equal values being wrongly treated as unequal, and an incorrect result being returned from fmodl. This patch fixes this by checking for the case of zero low parts. Although this does show up in tests from libm-test.inc (both tests of fmodl, and, indirectly, of remainderl / dreml), the dependence on non-semantic zero low parts means that test shouldn't be expected to reproduce it reliably; thus, this patch adds a standalone test that sets up affected values using unions. Tested for powerpc. [BZ #19602] * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Handle equal high parts and both low parts zero specially. * sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: New test. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-fmodl-ldbl-128ibm.
* Fix ldbl-128ibm fmodl handling of subnormal results (bug 19595).Joseph Myers2016-02-181-9/+5
| | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of fmodl has completely bogus logic for subnormal results (in this context, that means results for which the result is in the subnormal range for double, not results with absolute value below LDBL_MIN), based on code used for ldbl-128 that is correct in that case but incorrect in the ldbl-128ibm use. This patch fixes it to convert the mantissa into the correct form expected by ldbl_insert_mantissa, removing the other cases of the code that were incorrect and in one case unreachable for ldbl-128ibm. A correct exponent value is then passed to ldbl_insert_mantissa to reflect the shifted result. Tested for powerpc. [BZ #19595] * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Use common logic for all cases of shifting subnormal results. Do not insert sign bit in shifted mantissa. Always pass -1023 as biased exponent to ldbl_insert_mantissa in subnormal case.
* Fix ldbl-128ibm roundl for non-default rounding modes (bug 19594).Joseph Myers2016-02-181-36/+34
| | | | | | | | | | | | | | | | The ldbl-128ibm implementation of roundl is only correct in round-to-nearest mode (in other modes, there are incorrect results and overflow exceptions in some cases). This patch reimplements it along the lines used for floorl, ceill and truncl, using __round on the high part, and on the low part if the high part is an integer, and then adjusting in the cases where this is incorrect. Tested for powerpc. [BZ #19594] * sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Use __round on high and low parts then adjust result and use ldbl_canonicalize_int if needed.
* Fix ldbl-128ibm truncl for non-default rounding modes (bug 19593).Joseph Myers2016-02-181-39/+11
| | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of truncl is only correct in round-to-nearest mode (in other modes, there are incorrect results and overflow exceptions in some cases). It is also unnecessarily complicated, rounding both high and low parts to the nearest integer and then adjusting for the semantics of trunc, when it seems more natural to take the truncation of the high part (__trunc optimized inline versions can be used), and the floor or ceiling of the low part (depending on the sign of the high part) if the high part is an integer, as was done for floorl and ceill. This patch makes it use that simpler approach. Tested for powerpc. [BZ #19593] * sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Use __trunc on high part and __floor or __ceil on low part then use ldbl_canonicalize_int if needed.
* Fix ldbl-128ibm ceill for non-default rounding modes (bug 19592).Joseph Myers2016-02-181-36/+16
| | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of ceill is only correct in round-to-nearest mode (in other modes, there are incorrect results and overflow exceptions in some cases). It is also unnecessarily complicated, rounding both high and low parts to the nearest integer and then adjusting for the semantics of ceil, when it seems more natural to take the ceiling of the high part (__ceil optimized inline versions can be used), and that of the low part if the high part is an integer, as was done for floorl. This patch makes it use that simpler approach. Tested for powerpc. [BZ #19592] * sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Use __ceil on high and low parts then use ldbl_canonicalize_int if needed.
* Fix ldbl-128ibm floorl for non-default rounding modes (bug 17899).Joseph Myers2016-02-182-29/+49
| | | | | | | | | | | | | | | | | | | | | | | | The ldbl-128ibm implementation of floorl is only correct in round-to-nearest mode (in other modes, there are incorrect results and overflow exceptions in some cases going beyond the incorrect signs of zero results noted in bug 17899). It is also unnecessarily complicated, rounding both high and low parts to the nearest integer and then adjusting for the semantics of floor, when it seems more natural to take the floor of the high part (__floor optimized inline versions can be used), and that of the low part if the high part is an integer. This patch makes it use that simpler approach, with a canonicalization that works in all rounding modes (given that the only way the result can be noncanonical is if taking the floor of a negative noninteger low part increased its exponent). Tested for powerpc, where over a thousand failures are removed from test-ldouble.out (floorl problems affect many powl tests). [BZ #17899] * sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int): New function. * sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Use __floor on high and low parts then use ldbl_canonicalize_int if needed.
* Remove unused variablesAndreas Schwab2016-01-272-3/+0
| | | | They are flagged by -Wunused-const-variable.
* Fix __finitel libm compat symbol version.Joseph Myers2016-01-202-4/+4
| | | | | | | | | | | | | | | | | | The changes to restrict implementation-namespace symbol aliases such as __finitel to compat symbols used code for __finitel in libm analogous to that for __finitel in libc. However, the versions for the two symbols are actually different, GLIBC_2.0 in libc and GLIBC_2.1 in libm. This patch fixes the handling of the libm compat symbol. Tested for mips (o32), where it fixes an ABI test failure. * sysdeps/ieee754/dbl-64/s_finite.c [NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Define compat symbol at version GLIBC_2_1 and use GLIBC_2_1 in SHLIB_COMPAT condition for libm, not GLIBC_2_0. * sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c [NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Likewise.
* S/390: Do not raise inexact exception in lrint/lround. [BZ #19486]Stefan Liebler2016-01-184-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I get some math test-failures on s390 for float/double/ldouble for various lrint/lround functions like: lrint (0x1p64): Exception "Inexact" set lrint (-0x1p64): Exception "Inexact" set lround (0x1p64): Exception "Inexact" set lround (-0x1p64): Exception "Inexact" set ... GCC emits "convert to fixed" instructions for casting floating point values to integer values. These instructions raise invalid and inexact exceptions if the floating point value exceeds the integer type ranges. This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in order to avoid a cast from floating point to integer type and raise the invalid exception with feraiseexcept. The ldbl-128 rint/round functions are now using the same logic. ChangeLog: [BZ #19486] * sysdeps/s390/fix-fp-int-convert-overflow.h: New File. * sysdeps/generic/fix-fp-int-convert-overflow.h (FIX_LDBL_LONG_CONVERT_OVERFLOW, FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define. * sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise. * sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Avoid conversions to long int where inexact exceptions could be raised. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Avoid conversions to long long int where inexact exceptions could be raised. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise.
* Call math_opt_barrier inside ifH.J. Lu2016-01-154-4/+16
| | | | | | | | | | | | Since floating-point operation may trigger floating-point exceptions, we call math_opt_barrier inside if to prevent code motion. [BZ #19465] * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Call math_opt_barrier inside if. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise. * sysdeps/ieee754/ldbl-96/s_fma.c (__fma): Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
* Eliminate redundant sign extensions in pow()Anton Blanchard2016-01-041-2/+4
| | | | | | | | When looking at the code generated for pow() on ppc64 I noticed quite a few sign extensions. Making the array indices unsigned reduces the number of sign extensions from 24 to 7. Tested for powerpc64le and x86_64.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-04222-222/+222
|
* Consolidate sincos computation for 2.426265 < |x| < 105414350Siddhesh Poyarekar2015-12-212-281/+123
| | | | | | | Like the previous change, exploit the fact that computation for sin and cos is identical except that it is apart by a quadrant. Also remove csloww, csloww1 and csloww2 since they can easily be expressed in terms of sloww, sloww1 and sloww2.
* Consolidate sin and cos code for 105414350 <|x|< 281474976710656Siddhesh Poyarekar2015-12-212-146/+119
| | | | | | The sin and cos computation for this range of input is identical except for a difference in quadrants by 1. Exploit that fact and the common argument reduction to reduce computations for sincos.
* Consolidate range reduction in sincos for x > 281474976710656Siddhesh Poyarekar2015-12-212-2/+57
| | | | | | Range reduction needs to be done only once for sin and cos, so copy over all of the relevant functions (__sin, __cos, reduce_and_compute) and consolidate common code.
* Fix indentation.Steve Ellcey2015-12-111-1/+3
| | | | | * sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f): Fix indentation.
* Fix ldbl-128ibm logl inaccuracy near 1 (bug 19351).Joseph Myers2015-12-091-1/+1
| | | | | | | | | | | | | | | The ldbl-128ibm implementation of logl is inaccurate for arguments near 1, because when deciding whether to bypass a series expansion for log(1+z), where z = x-1, it compares the square of z rather than z itself with an epsilon value. This patch fixes that comparison, so eliminating the test failures for inaccuracy of logl in such cases. Tested for powerpc. [BZ #19351] * sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): When expanding log(1+z), compare z rather than its square with epsilon to determine when to avoid evaluating the expansion.
* Fix ldbl-128ibm sinhl spurious overflows (bug 19350).Joseph Myers2015-12-091-1/+1
| | | | | | | | | | | | | | The ldbl-128ibm implementation of sinhl uses a slightly too small overflow threshold (similar to bug 16407 for coshl). This patch fixes it to use a safe threshold (so that values whose high part is above the value compared with definitely result in an overflow in all rounding modes). Tested for powerpc. [BZ #19350] * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Increase overflow threshold.
* Fix ldbl-128ibm tanhl inaccuracy for small arguments (bug 19349).Joseph Myers2015-12-091-1/+1
| | | | | | | | | | | | | | | The ldbl-128ibm implementation of tanhl is inaccurate for small arguments, because it returns x*(1+x) (maybe in an attempt to raise "inexact") when x itself would be the accurate return value but multiplying by 1+x introduces large errors. This patch fixes it to return x in that case (when the mathematical result is x plus a negligible remainder on the order of x^3) to avoid those errors. Tested for powerpc. [BZ #19349] * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Return argument when small.
* math: add LDBL_CLASSIFY_COMPAT supportChris Metcalf2015-12-036-6/+34
| | | | | | | | | | | | | | | | | If a platform does not define "long-double-fcts = yes" in its Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed headers, it will currently create exported symbols for __finitel, __isinfl, and __isnanl that can't be reached from userspace by correct use of the finite(), isinf(), or isnan() macros in <math.h>. To avoid this situation, by default for such platforms we now no longer export these symbols, thus causing appropriate link-time errors. However, for platforms that previously exported these symbols, we continue to do so as compat symbols; this is enabled by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform. For tile, remove the now-unnecessary exports of those functions from libc and libm.
* Use hex float constants in sysdeps/ieee754/dbl-64/e_sqrt.c.Joseph Myers2015-12-012-46/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various sysdeps/ieee754/dbl-64 functions use double constants defined using a union between a double and two ints, with separate big-endian and little-endian definitions of the constants. With modern C, this is unnecessary complication; hex float constants (or __builtin_inf etc.) suffice to specify the exact value desired, and so can avoid separate versions for each endianness. Having this complication also complicates cleanups such as removing slow paths from these library functions, as they need to make sure to remove both copies of variables that are no longer used after such a cleanup (and in at least one case, proper removal of a slow path will also involve removing slow-path-only values from the middle of an array - an array with both big-endian and little-endian copies - and adjusting other references to that array). So it makes sense to clean up the code to define these constants using hex floats and so eliminate the endianness conditional. This patch does so in the case of sqrt, where the two constants are such that it makes sense just to put them directly in the code using them and eliminate the names for them altogether. Tested for arm (the code generated for sqrt does change, though not in any significant way). * sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h. (__ieee754_sqrt): Use hex float constants instead of tm256.x and t512.x. * sysdeps/ieee754/dbl-64/uroot.h: Remove file.
* Refactor strtod parsing of NaN payloads.Joseph Myers2015-11-247-38/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nan* functions handle their string argument by constructing a NAN(...) string on the stack as a VLA and passing it to strtod functions. This approach has problems discussed in bug 16961 and bug 16962: the stack usage is unbounded, and it gives incorrect results in certain cases where the argument is not a valid n-char-sequence. The natural fix for both issues is to refactor the NaN payload parsing out of strtod into a separate function that the nan* functions can call directly, so that no temporary string needs constructing on the stack at all. This patch does that refactoring in preparation for fixing those bugs (but without actually using the new functions from nan* - which will also require exporting them from libc at version GLIBC_PRIVATE). This patch is not intended to change any user-visible behavior, so no tests are added (fixes for the above bugs will of course add tests for them). This patch builds on my recent fixes for strtol and strtod issues in Turkish locales. Given those fixes, the parsing of NaN payloads is locale-independent; thus, the new functions do not need to take a locale_t argument. Tested for x86_64, x86, mips64 and powerpc. * stdlib/strtod_nan.c: New file. * stdlib/strtod_nan_double.h: Likewise. * stdlib/strtod_nan_float.h: Likewise. * stdlib/strtod_nan_main.c: Likewise. * stdlib/strtod_nan_narrow.h: Likewise. * stdlib/strtod_nan_wide.h: Likewise. * stdlib/strtof_nan.c: Likewise. * stdlib/strtold_nan.c: Likewise. * sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise. * sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise. * sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise. * wcsmbs/wcstod_nan.c: Likewise. * wcsmbs/wcstof_nan.c: Likewise. * wcsmbs/wcstold_nan.c: Likewise. * stdlib/Makefile (routines): Add strtof_nan, strtod_nan and strtold_nan. * wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and wcstof_nan. * include/stdlib.h (__strtof_nan): Declare and use libc_hidden_proto. (__strtod_nan): Likewise. (__strtold_nan): Likewise. (__wcstof_nan): Likewise. (__wcstod_nan): Likewise. (__wcstold_nan): Likewise. * include/wchar.h (____wcstoull_l_internal): Declare. * stdlib/strtod_l.c: Do not include <ieee754.h>. (____strtoull_l_internal): Remove declaration. (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. (STRTOULL): Likewise. (____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload. * stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration. (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. * sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. * sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. * sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. * sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro. (SET_MANTISSA): Remove macro. * wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration. * wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise. * wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
* Fix lgamma setting signgam for ISO C (bug 15421).Joseph Myers2015-11-205-13/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lgamma (and likewise lgammaf, lgammal) function wrongly sets the signgam variable even when building for strict ISO C conformance (-std=c99 / -std=c11), although the user may define such a variable and it's only in the implementation namespace for POSIX with XSI extensions enabled. Following discussions starting at <https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and <https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems that the safest approach for fixing this particular issue is for signgam to become a weak alias for a newly exported symbol __signgam, with the library functions only setting __signgam, at which point static linker magic will preserve the alias for newly linked binaries that refer to the library's signgam rather than defining their own, while breaking the alias for programs that define their own signgam, with new symbol versions for lgamma functions and with compat symbols for existing binaries that set both signgam and __signgam. This patch implements that approach for the fix. signgam is made into a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal get new symbol versions at version GLIBC_2.23, with the existing versions of lgamma, lgammaf and lgammal becoming compat symbols. When the compat versions are built, gamma, gammaf and gammal are aliases for the compat versions (i.e. always set signgam); this is OK as they are not ISO C functions, and avoids adding new symbol versions for them unnecessarily. When the compat versions are not built (i.e. for static linking and for future glibc ports), gamma, gammaf and gammal are aliases for the new versions that set __signgam. The ldbl-opt versions are updated accordingly. The lgamma wrappers are adjusted so that the same source files, included from different files with different definitions of USE_AS_COMPAT, can build either the new versions or the compat versions. Similar changes are made to the ia64 versions (untested). Tests are added that the lgamma functions do not interfere with a user variable called signgam for ISO C, with various choices for the size of that variable, whether it is initialized, and for static and dynamic linking. The conformtest whitelist entry is removed as well. Tested for x86_64, x86, mips64 and powerpc, including looking at objdump --dynamic-syms output to make sure the expected sets of symbols were aliases. Also spot-tested that a binary built with old glibc works properly (i.e. gets signgam set) when run with new glibc. [BZ #15421] * sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam, initialize with 0 and define as weak alias of __signgam. * include/math.h [!_ISOMAC] (__signgam): Declare. * math/Makefile (libm-calls): Add w_lgamma_compat. (tests): Add test-signgam-uchar, test-signgam-uchar-init, test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and test-signgam-ullong-init. (tests-static): Add test-signgam-uchar-static, test-signgam-uchar-init-static, test-signgam-uint-static, test-signgam-uint-init-static, test-signgam-ullong-static and test-signgam-ullong-init-static. (CFLAGS-test-signgam-uchar.c): New variable. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. * math/Versions (libm): Add GLIBC_2.23. * math/lgamma-compat.h: New file. * math/test-signgam-main.c: Likewise. * math/test-signgam-uchar-init-static.c: Likewise. * math/test-signgam-uchar-init.c: Likewise. * math/test-signgam-uchar-static.c: Likewise. * math/test-signgam-uchar.c: Likewise. * math/test-signgam-uint-init-static.c: Likewise. * math/test-signgam-uint-init.c: Likewise. * math/test-signgam-uint-static.c: Likewise. * math/test-signgam-uint.c: Likewise. * math/test-signgam-ullong-init-static.c: Likewise. * math/test-signgam-ullong-init.c: Likewise. * math/test-signgam-ullong-static.c: Likewise. * math/test-signgam-ullong.c: Likewise. * math/w_lgamma.c: Rename to w_lgamma_main.c and replace by wrapper of w_lgamma_main.c. * math/w_lgamma_compat.c: New file. * math/w_lgamma_compatf.c: Likewise. * math/w_lgamma_compatl.c: Likewise. * math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA. * math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by wrapper of w_lgammaf_main.c. * math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA. * math/w_lgammal.c: Rename to w_lgammal_main.c and replace by wrapper of w_lgammal_main.c. * math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA. * sysdeps/ia64/fpu/lgamma-compat.h: New file. * sysdeps/ia64/fpu/w_lgamma.c: Move to .... * sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA. (__ieee754_gamma): Define as alias. * sysdeps/ia64/fpu/w_lgammaf.c: Move to .... * sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA. (__ieee754_gammaf): Define as alias. * sysdeps/ia64/fpu/w_lgammal.c: Move to .... * sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA. (__ieee754_gammal): Define as alias. * sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include <math/w_lgamma_compat.c>. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat): Define as alias of __lgamma_compat and use in defining lgammal. * sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include <math/lgamma-compat.h> and <math/w_lgamma_compatl.c>. (USE_AS_COMPAT): New macro. (LGAMMA_OLD_VER): Undefine and redefine. (lgammal): Do not define here. (gammal): Only define here if [GAMMA_ALIAS]. * conform/linknamespace.pl (@whitelist): Remove signgam. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Shuffle includes in ldbl-128ibm/mpn2ldl.cPaul Murphy2015-11-191-2/+6
| | | | | | | | | | | Kind of hokey, but errno.h drags in misc/sys/param.h which defines MIN/MAX causing an error. Include system headers first to grab MIN/MAX definition in param.h, and define HAVE_ALLOCA to preserve existing behavior. * sysdeps/ieee754/ldbl-128ibm/mpn2ldl.c: Include gmp headers after system headers to prevent MIN/MAX redefinition. Define HAVE_ALLOCA to preserve builtin alloca usage.
* Include s_sin.c in s_sincos.cSiddhesh Poyarekar2015-11-172-19/+20
| | | | | | | | | | | | | | Include the __sin and __cos functions as local static copies to allow deper optimization of the functions. This change shows an improvement of about 17% in the min case and 12.5% in the mean case for the sincos microbenchmark on x86_64. * sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function static and don't set or restore rounding. (__cos)[IN_SINCOS]: Likewise. * sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c. (__sincos): Set and restore rounding mode. Remove check for infinite or NaN input.
* Remove redundant else clauses in s_sin.cSiddhesh Poyarekar2015-11-171-186/+158
| | | | | Makes the code easier to read due to the reduced nesting. The generated binary is unchanged.
* Fix ldbl-128ibm strtold overflow handling (bug 14551).Joseph Myers2015-11-133-0/+99
| | | | | | | | | | | | | | | | | | | | | | | | For ldbl-128ibm, if the result of strtold overflows in the final conversion from MPN to IBM long double (because the exponent for a 106-bit IEEE result is 1023 but the high part would end up as 0x1p1024, which overflows), that conversion code fails to handle this and produces an invalid long double value (high part infinite, low part not zero) without raising exceptions or setting errno. This patch adds an explicit check for this case to ensure an appropriate result is returned in a way that ensures the right exceptions are raised, with errno set. Tested for powerpc. [BZ #14551] * sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: Include <errno.h>. (__mpn_construct_long_double): If high part overflows to infinity, set errno and recompute overflowed result of the correct sign. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = stdlib] (tests): Add tst-strtold-ldbl-128ibm. [$(subdir) = stdlib] ($(objpfx)tst-strtold-ldbl-128ibm): Depend on $(libm). * sysdeps/ieee754/ldbl-128ibm/tst-strtold-ldbl-128ibm.c: New file.
* Fix dbl-64 remainder sign of zero result (bug 19201).Joseph Myers2015-11-031-0/+2
| | | | | | | | | | | | | | | | | | For some large arguments, the dbl-64 implementation of remainder gives zero results with the wrong sign, resulting from a subtraction that is mathematically correct but does not guarantee that a zero result has the sign of the first argument to remainder. This patch adds an appropriate check for this case, similar to other implementations of remainder in the case of equality, and adds tests of remainder on inputs already used to test remquo. Tested for x86_64 and x86. [BZ #19201] * sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder): Check for zero remainder in case of large exponents and ensure correct sign of result in that case. * math/libm-test.inc (remainder_test_data): Add more tests.
* Make nextafter, nexttoward set errno (bug 6799).Joseph Myers2015-11-0210-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nextafter and nexttoward fail to set errno on overflow and underflow. This patch makes them do so in cases that should include all the cases where such errno setting is required by glibc's goals for when to set errno (but not all cases of underflow where the result is nonzero and so glibc's goals do not require errno setting). Tested for x86_64, x86, mips64 and powerpc. [BZ #6799] * math/s_nextafter.c: Include <errno.h>. (__nextafter): Set errno on overflow and underflow. * math/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>. (__nextafterf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>. (__nldbl_nexttowardf): Set errno on overflow and underflow. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * math/libm-test.inc (nextafter_test_data): Do not allow errno setting to be missing on overflow. Add more tests. (nexttoward_test_data): Likewise.
* Fix ldbl-128 log1pl (-qNaN) spurious "invalid" exception (bug 19189).Joseph Myers2015-10-291-2/+2
| | | | | | | | | | | | | | | The ldbl-128 version of log1pl raises a spurious "invalid" exception for a -qNaN argument. This patch fixes this by making the initial check for infinities and NaNs handle arguments of both signs in such a way that NaNs result in a NaN being returned (quietly if the input NaN was quiet) while +Inf results in +Inf being returned and -Inf results in a qNaN being returned with "invalid" exception raised. Tested for mips64. [BZ #19189] * sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Make check for non-finite argument handle arguments with negative sign.
* Make drem an alias of remainder (bug 16171).Joseph Myers2015-10-297-21/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The libm drem functions just call the corresponding __remainder functions. This patch removes the unnecessary wrappers by making them into weak aliases at the ELF level. Tested for x86_64, x86, mips64 and powerpc. [BZ #16171] * math/w_remainder.c (drem): Define as weak alias of __remainder. [NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder. * math/w_remainderf.c (dremf): Define as weak alias of __remainderf. * math/w_remainderl.c (dreml): Define as weak alias of __remainderl. * sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of __remainder. * sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of __remainderf. * sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of __remainderl. * sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as weak alias of remainderl. * sysdeps/ieee754/ldbl-opt/w_remainder.c [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong alias of __remainder. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol. * sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as strong alias of __remainderl. (dreml): Use long_double_symbol. * math/Makefile (libm-calls): Remove w_drem. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem. (CFLAGS-nldbl-drem.c): Remove variable. (CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml. * math/w_drem.c: Remove file. * math/w_dremf.c: Likewise. * math/w_dreml.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
* Use C11 *_TRUE_MIN macros where applicable.Joseph Myers2015-10-284-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | C11 defines standard <float.h> macros *_TRUE_MIN for the least positive subnormal value of a type. Now that we build with -std=gnu11, we can use these macros in glibc. This patch replaces previous uses of the GCC predefines __*_DENORM_MIN__ (used in <float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in comments. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested for powerpc that installed stripped shared libraries are unchanged by the patch. * math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN, DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__, __DBL_DENORM_MIN__ and __FLT_DENORM_MIN__. * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN instead of DBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>. (__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
* Remove GCC version conditionals on -Wmaybe-uninitialized pragmas.Joseph Myers2015-10-276-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One common case of __GNUC_PREREQ (4, 7) conditionals is use of diagnostic control pragmas for -Wmaybe-uninitialized, an option introduced in GCC 4.7 where older GCC needed -Wuninitialized to be controlled instead if the warning appeared with older GCC. This patch removes such conditionals. (There remain several older uses of -Wno-uninitialized in makefiles that still need to be converted to diagnostic control pragmas if the issue is still present with current sources and supported GCC versions, and it's likely that in most cases those pragmas also will end up controlling -Wmaybe-uninitialized.) Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch, except for libresolv since res_send.c contains assertions whose line numbers are changed by the patch). * resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code unconditional. * soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code unconditional. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code unconditional. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * stdlib/setenv.c [((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make code unconditional. [!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]: Remove conditional code. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-128/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-96/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* Fix j1, jn missing errno setting on underflow (bug 18611).Joseph Myers2015-10-239-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | j1 and jn can underflow for small arguments, but fail to set errno when underflowing to 0. This patch fixes them to set errno in that case. Tested for x86_64, x86, mips64 and powerpc. [BZ #18611] * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and avoid excess range and precision on underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Do not allow missing errno setting for tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
* Fix ldbl-128 j0l spurious underflows (bug 19156).Joseph Myers2015-10-211-0/+2
| | | | | | | | | | | | | | My recent addition of more tests for j0 showed up that the ldbl-128 implementation of j0l produces spurious underflow exceptions for arguments close to 0 (when the result is very close to 1). This patch fixes this by just returning the argument in that case. Tested for mips64 (where it fixes the recently-added tests that were previously failing). [BZ #19156] * sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Return 1 for arguments very close to 0.
* Convert 231 sysdeps function definitions to prototype style.Joseph Myers2015-10-192-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mostly automatically-generated patch converts 231 sysdeps function definitions in glibc from old-style K&R to prototype-style. For __aio_sigqueue and __gai_sigqueue I had to add internal_function to the definitions as noted by Florian in <https://sourceware.org/ml/libc-alpha/2015-10/msg00595.html> to keep the functions compiling on x86 after conversion to prototype definitions. Otherwise, the patch is automatically generated with all the same exclusions and caveats as in <https://sourceware.org/ml/libc-alpha/2015-10/msg00594.html> except that it's a patch for sysdeps files. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Also tested for arm, mips64 and powerpc32 that installed stripped shared libraries are unchanged by the patch. * sysdeps/arm/backtrace.c (__backtrace): Convert to prototype-style function definition. * sysdeps/i386/backtrace.c (__backtrace): Likewise. * sysdeps/i386/ffs.c (__ffs): Likewise. * sysdeps/i386/i686/ffs.c (__ffs): Likewise. * sysdeps/ia64/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/ia64/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/m68k/ffs.c (__ffs): Likewise. * sysdeps/m68k/m680x0/fpu/e_acos.c (FUNC): Likewise. * sysdeps/m68k/m680x0/fpu/e_fmod.c (FUNC): Likewise. * sysdeps/mach/adjtime.c (__adjtime): Likewise. * sysdeps/mach/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/mach/hurd/_exit.c (_exit): Likewise. * sysdeps/mach/hurd/access.c (__access): Likewise. * sysdeps/mach/hurd/adjtime.c (__adjtime): Likewise. * sysdeps/mach/hurd/chdir.c (__chdir): Likewise. * sysdeps/mach/hurd/chmod.c (__chmod): Likewise. * sysdeps/mach/hurd/chown.c (__chown): Likewise. * sysdeps/mach/hurd/cthreads.c (cthread_keycreate): Likewise. (cthread_getspecific): Likewise. (cthread_setspecific): Likewise. (__libc_getspecific): Likewise. * sysdeps/mach/hurd/euidaccess.c (__euidaccess): Likewise. * sysdeps/mach/hurd/faccessat.c (faccessat): Likewise. * sysdeps/mach/hurd/fchdir.c (__fchdir): Likewise. * sysdeps/mach/hurd/fchmod.c (__fchmod): Likewise. * sysdeps/mach/hurd/fchmodat.c (fchmodat): Likewise. * sysdeps/mach/hurd/fchown.c (__fchown): Likewise. * sysdeps/mach/hurd/fchownat.c (fchownat): Likewise. * sysdeps/mach/hurd/flock.c (__flock): Likewise. * sysdeps/mach/hurd/fsync.c (fsync): Likewise. * sysdeps/mach/hurd/ftruncate.c (__ftruncate): Likewise. * sysdeps/mach/hurd/getgroups.c (__getgroups): Likewise. * sysdeps/mach/hurd/gethostname.c (__gethostname): Likewise. * sysdeps/mach/hurd/getitimer.c (__getitimer): Likewise. * sysdeps/mach/hurd/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/mach/hurd/getpgid.c (__getpgid): Likewise. * sysdeps/mach/hurd/getrusage.c (__getrusage): Likewise. * sysdeps/mach/hurd/getsockname.c (__getsockname): Likewise. * sysdeps/mach/hurd/group_member.c (__group_member): Likewise. * sysdeps/mach/hurd/isatty.c (__isatty): Likewise. * sysdeps/mach/hurd/lchown.c (__lchown): Likewise. * sysdeps/mach/hurd/link.c (__link): Likewise. * sysdeps/mach/hurd/linkat.c (linkat): Likewise. * sysdeps/mach/hurd/listen.c (__listen): Likewise. * sysdeps/mach/hurd/mkdir.c (__mkdir): Likewise. * sysdeps/mach/hurd/mkdirat.c (mkdirat): Likewise. * sysdeps/mach/hurd/openat.c (__openat): Likewise. * sysdeps/mach/hurd/poll.c (__poll): Likewise. * sysdeps/mach/hurd/readlink.c (__readlink): Likewise. * sysdeps/mach/hurd/readlinkat.c (readlinkat): Likewise. * sysdeps/mach/hurd/recv.c (__recv): Likewise. * sysdeps/mach/hurd/rename.c (rename): Likewise. * sysdeps/mach/hurd/renameat.c (renameat): Likewise. * sysdeps/mach/hurd/revoke.c (revoke): Likewise. * sysdeps/mach/hurd/rewinddir.c (__rewinddir): Likewise. * sysdeps/mach/hurd/rmdir.c (__rmdir): Likewise. * sysdeps/mach/hurd/seekdir.c (seekdir): Likewise. * sysdeps/mach/hurd/send.c (__send): Likewise. * sysdeps/mach/hurd/setdomain.c (setdomainname): Likewise. * sysdeps/mach/hurd/setegid.c (setegid): Likewise. * sysdeps/mach/hurd/seteuid.c (seteuid): Likewise. * sysdeps/mach/hurd/setgid.c (__setgid): Likewise. * sysdeps/mach/hurd/setgroups.c (setgroups): Likewise. * sysdeps/mach/hurd/sethostid.c (sethostid): Likewise. * sysdeps/mach/hurd/sethostname.c (sethostname): Likewise. * sysdeps/mach/hurd/setlogin.c (setlogin): Likewise. * sysdeps/mach/hurd/setpgid.c (__setpgid): Likewise. * sysdeps/mach/hurd/setregid.c (__setregid): Likewise. * sysdeps/mach/hurd/setreuid.c (__setreuid): Likewise. * sysdeps/mach/hurd/settimeofday.c (__settimeofday): Likewise. * sysdeps/mach/hurd/setuid.c (__setuid): Likewise. * sysdeps/mach/hurd/shutdown.c (shutdown): Likewise. * sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigpending.c (sigpending): Likewise. * sysdeps/mach/hurd/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/mach/hurd/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/mach/hurd/socket.c (__socket): Likewise. * sysdeps/mach/hurd/symlink.c (__symlink): Likewise. * sysdeps/mach/hurd/symlinkat.c (symlinkat): Likewise. * sysdeps/mach/hurd/telldir.c (telldir): Likewise. * sysdeps/mach/hurd/truncate.c (__truncate): Likewise. * sysdeps/mach/hurd/umask.c (__umask): Likewise. * sysdeps/mach/hurd/unlink.c (__unlink): Likewise. * sysdeps/mach/hurd/unlinkat.c (unlinkat): Likewise. * sysdeps/mips/mips64/__longjmp.c (__longjmp): Likewise. * sysdeps/posix/alarm.c (alarm): Likewise. * sysdeps/posix/cuserid.c (cuserid): Likewise. * sysdeps/posix/dirfd.c (dirfd): Likewise. * sysdeps/posix/dup.c (__dup): Likewise. * sysdeps/posix/dup2.c (__dup2): Likewise. * sysdeps/posix/euidaccess.c (euidaccess): Likewise. (main): Likewise. * sysdeps/posix/flock.c (__flock): Likewise. * sysdeps/posix/fpathconf.c (__fpathconf): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/posix/gethostname.c (__gethostname): Likewise. * sysdeps/posix/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/posix/isatty.c (__isatty): Likewise. * sysdeps/posix/killpg.c (killpg): Likewise. * sysdeps/posix/libc_fatal.c (__libc_fatal): Likewise. * sysdeps/posix/mkfifoat.c (mkfifoat): Likewise. * sysdeps/posix/raise.c (raise): Likewise. * sysdeps/posix/remove.c (remove): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/posix/rewinddir.c (__rewinddir): Likewise. * sysdeps/posix/seekdir.c (seekdir): Likewise. * sysdeps/posix/sigblock.c (__sigblock): Likewise. * sysdeps/posix/sigignore.c (sigignore): Likewise. * sysdeps/posix/sigintr.c (siginterrupt): Likewise. * sysdeps/posix/signal.c (__bsd_signal): Likewise. * sysdeps/posix/sigset.c (sigset): Likewise. * sysdeps/posix/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/posix/sysconf.c (__sysconf): Likewise. * sysdeps/posix/sysv_signal.c (__sysv_signal): Likewise. * sysdeps/posix/time.c (time): Likewise. * sysdeps/posix/ttyname.c (getttyname): Likewise. (ttyname): Likewise. * sysdeps/posix/ttyname_r.c (__ttyname_r): Likewise. * sysdeps/posix/utime.c (utime): Likewise. * sysdeps/powerpc/fpu/s_isnan.c (__isnan): Likewise. * sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/pthread/aio_error.c (aio_error): Likewise. * sysdeps/pthread/aio_read.c (aio_read): Likewise. * sysdeps/pthread/aio_read64.c (aio_read64): Likewise. * sysdeps/pthread/aio_write.c (aio_write): Likewise. * sysdeps/pthread/aio_write64.c (aio_write64): Likewise. * sysdeps/pthread/flockfile.c (__flockfile): Likewise. * sysdeps/pthread/ftrylockfile.c (__ftrylockfile): Likewise. * sysdeps/pthread/funlockfile.c (__funlockfile): Likewise. * sysdeps/pthread/timer_create.c (timer_create): Likewise. * sysdeps/pthread/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/pthread/timer_gettime.c (timer_gettime): Likewise. * sysdeps/s390/ffs.c (__ffs): Likewise. * sysdeps/s390/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/sh/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/sparc/nptl/pthread_barrier_destroy.c (pthread_barrier_destroy): Likewise. * sysdeps/sparc/nptl/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/e_sqrt.c (__ieee754_sqrt): Likewise. * sysdeps/sparc/sparc32/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/sem_init.c (__old_sem_init): Likewise. * sysdeps/tile/memcmp.c (memcmp_common_alignment): Likewise. (memcmp_not_common_alignment): Likewise. (MEMCMP): Likewise. * sysdeps/tile/wordcopy.c (_wordcopy_fwd_aligned): Likewise. (_wordcopy_fwd_dest_aligned): Likewise. (_wordcopy_bwd_aligned): Likewise. (_wordcopy_bwd_dest_aligned): Likewise. * sysdeps/unix/bsd/ftime.c (ftime): Likewise. * sysdeps/unix/bsd/gtty.c (gtty): Likewise. * sysdeps/unix/bsd/stty.c (stty): Likewise. * sysdeps/unix/bsd/tcflow.c (tcflow): Likewise. * sysdeps/unix/bsd/tcflush.c (tcflush): Likewise. * sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/bsd/tcgetpgrp.c (tcgetpgrp): Likewise. * sysdeps/unix/bsd/tcsendbrk.c (tcsendbreak): Likewise. * sysdeps/unix/bsd/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/bsd/tcsetpgrp.c (tcsetpgrp): Likewise. * sysdeps/unix/bsd/ualarm.c (ualarm): Likewise. * sysdeps/unix/bsd/wait3.c (__wait3): Likewise. * sysdeps/unix/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/unix/sockatmark.c (sockatmark): Likewise. * sysdeps/unix/stime.c (stime): Likewise. * sysdeps/unix/sysv/linux/_exit.c (_exit): Likewise. * sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/arm/sigaction.c (__libc_sigaction): Convert to prototype-style function definition. * sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise. * sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise. * sysdeps/unix/sysv/linux/fpathconf.c (__fpathconf): Likewise. * sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/gethostid.c (sethostid): Convert to prototype-style function definition * sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid): Likewise. (__getlogin_r): Likewise. * sysdeps/unix/sysv/linux/getpt.c (__posix_openpt): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_broadcast.c (__pthread_cond_broadcast): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_init.c (__pthread_cond_init): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_wait): Likewise. * sysdeps/unix/sysv/linux/i386/getmsg.c (getmsg): Likewise. * sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise. * sysdeps/unix/sysv/linux/ia64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/ia64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/ia64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c (__ftruncate64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c (truncate64): Likewise. * sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/pthread_getcpuclockid.c (pthread_getcpuclockid): Likewise. * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_sigmask.c (pthread_sigmask): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/semget.c (semget): Likewise. * sysdeps/unix/sysv/linux/semop.c (semop): Likewise. * sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise. * sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise. * sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise. * sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise. * sysdeps/unix/sysv/linux/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise. * sysdeps/unix/sysv/linux/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/speed.c (cfgetospeed): Likewise. (cfgetispeed): Likewise. (cfsetospeed): Likewise. (cfsetispeed): Likewise. * sysdeps/unix/sysv/linux/tcflow.c (tcflow): Likewise. * sysdeps/unix/sysv/linux/tcflush.c (tcflush): Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/sysv/linux/time.c (time): Likewise. * sysdeps/unix/sysv/linux/timer_create.c (timer_create): Likewise. * sysdeps/unix/sysv/linux/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/x86_64/backtrace.c (__backtrace): Likewise.
* Fix lrint, llrint, lround, llround missing exceptions for MIPS (bug 16399).Joseph Myers2015-10-098-14/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32-bit MIPS and some other systems, various of the lrint, llrint, lround, llround functions can be missing exceptions on overflow because casts do not (in current GCC) result in the proper exceptions. In the MIPS case there are two problems here: MIPS I code generation uses an assembler macro that doesn't raise exceptions, while the libgcc conversions of floating-point values to long long also do not raise "invalid" on all overflow cases (and can raise spurious "inexact"). This patch adds support in the generic code (only the functions for which this problem has actually been seen) for forcing the "invalid" exception in the problem cases, and enables that support for the affected MIPS cases. Tested for MIPS; also tested for x86_64 and x86 that installed stripped shared libraries are unchanged by this patch. [BZ #16399] * sysdeps/generic/fix-fp-int-convert-overflow.h: New file. * sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fix-fp-int-convert-overflow.h>. (__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lround.c: Include <fix-fp-int-convert-overflow.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file.
* Fix dbl-64 lrint for 64-bit long (bug 19095).Joseph Myers2015-10-091-1/+1
| | | | | | | | | | | | | | | The dbl-64 implementation of lrint produces incorrect results for some arguments with 64-bit long because a 32-bit (unsigned) low part of the mantissa is shifted left, losing high bits in the process. This patch fixes this by casting to long int before shifting, as in lround (as this case only applies for 64-bit long, there are no issues with sign-extension). Tested for mips64 (n64). [BZ #19095] * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of mantissa to long int before shifting left.
* Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094).Joseph Myers2015-10-085-22/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist. It also obviously cannot arise in FE_TOWARDZERO mode.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it is needed; unlike lround and llround, FE_INEXACT is required, not optional, for these functions for a within-range inexact result). The fixes are conditional on FE_INVALID or FE_INEXACT being defined. If any future architecture supports one but not both of those exceptions, the code will fail to compile and need fixing to handle that case (this seemed better than conditioning on both macros being defined, resulting in code that would compile but quietly miss exceptions on such a system). Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only relevant for ia64, it appears) on x86_64 by removing the x86_64 versions of lrintl / llrintl. [BZ #19094] * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and <limits.h>. (__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lrint_test_data): Add more tests. (llrint_test_data): Likewise.
* Fix lround, llround missing exceptions close to overflow threshold (bug 19088).Joseph Myers2015-10-076-13/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT). Tested for x86_64, x86 and mips64. [BZ #19088] * sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lround_test_data): Add more tests. (llround_test_data): Likewise.
* Fix ldbl-128 lrintl, lroundl missing exceptions for 32-bit long (bug 19085).Joseph Myers2015-10-072-22/+22
| | | | | | | | | | | | | | | The ldbl-128 implementations of lrintl and lroundl miss "invalid" exceptions on systems with 32-bit long for arguments that overflow long but have exponent below 48. This patch fixes this by rearranging the sequence of tests in the code so the exponent < 48 case is only used for exponents that don't overflow long. Tested for mips64 (n32 and n64). [BZ #19085] * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Move test for exponent below 48 inside case for non-overflowing exponent. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
* Use dbl-64/wordsize-64 for MIPS64.Joseph Myers2015-10-071-1/+0
| | | | | | | | | | | | This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for MIPS64 (both n64 and n32), removing a #error in one case now that case has been tested and found to work. Tested for mips64 (n64 and n32). * sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
* Don't use dbl-64/wordsize-64 lround based on llround for ILP32 (bug 19079).Joseph Myers2015-10-072-16/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | The implementation of lround in dbl-64/wordsize-64 as an alias or wrapper for llround is always incorrect when long is not 64-bit, because it misses required exceptions in overflow cases, as shown by my recently added tests. This patch removes that alias / wrapper in the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64 macro, restoring the previous version of lround for dbl-64/wordsize-64 (newly conditioned on !_LP64). Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64 enabled. [BZ #19079] * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous file, conditioned on [!_LP64]. * sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c [!_LP64] (__lround): Do not define as function or alias. [!_LP64] (lround): Likewise. [!_LP64] (__lroundl): Likewise. [!_LP64] (lroundl): Likewise. * sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove macro. * sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Likewise.
* Fix ldbl-128ibm expl overflow in non-default rounding modes (bug 19078).Joseph Myers2015-10-061-5/+2
| | | | | | | | | | | | | | | | | The ldbl-128ibm expl wrapper checks the argument to determine when to call __kernel_standard_l, thereby overriding overflowing results from __ieee754_expl that could otherwise (given appropriately patched libgcc) be correct for the rounding mode. This patch changes it to check the result of __ieee754_expl instead, as other versions of this wrapper do. Tested for powerpc. [BZ #19078] * sysdeps/ieee754/ldbl-128ibm/w_expl.c (o_thres): Remove variable. (u_thres): Likewise. (__expl): Determine whether to call __kernel_standard_l based on value of result, not argument.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-04 10:33:39 +0000