about summary refs log tree commit diff
path: root/sysdeps/ieee754/dbl-64
Commit message (Collapse)AuthorAgeFilesLines
* Use C11 *_TRUE_MIN macros where applicable.Joseph Myers2015-10-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | C11 defines standard <float.h> macros *_TRUE_MIN for the least positive subnormal value of a type. Now that we build with -std=gnu11, we can use these macros in glibc. This patch replaces previous uses of the GCC predefines __*_DENORM_MIN__ (used in <float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in comments. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested for powerpc that installed stripped shared libraries are unchanged by the patch. * math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN, DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__, __DBL_DENORM_MIN__ and __FLT_DENORM_MIN__. * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN instead of DBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>. (__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
* Remove GCC version conditionals on -Wmaybe-uninitialized pragmas.Joseph Myers2015-10-271-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One common case of __GNUC_PREREQ (4, 7) conditionals is use of diagnostic control pragmas for -Wmaybe-uninitialized, an option introduced in GCC 4.7 where older GCC needed -Wuninitialized to be controlled instead if the warning appeared with older GCC. This patch removes such conditionals. (There remain several older uses of -Wno-uninitialized in makefiles that still need to be converted to diagnostic control pragmas if the issue is still present with current sources and supported GCC versions, and it's likely that in most cases those pragmas also will end up controlling -Wmaybe-uninitialized.) Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch, except for libresolv since res_send.c contains assertions whose line numbers are changed by the patch). * resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code unconditional. * soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code unconditional. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code unconditional. [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * stdlib/setenv.c [((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make code unconditional. [!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]: Remove conditional code. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-128/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional code. * sysdeps/ieee754/ldbl-96/k_tanl.c (__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional. (__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* Fix j1, jn missing errno setting on underflow (bug 18611).Joseph Myers2015-10-232-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | j1 and jn can underflow for small arguments, but fail to set errno when underflowing to 0. This patch fixes them to set errno in that case. Tested for x86_64, x86, mips64 and powerpc. [BZ #18611] * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and avoid excess range and precision on underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Do not allow missing errno setting for tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
* Fix lrint, llrint, lround, llround missing exceptions for MIPS (bug 16399).Joseph Myers2015-10-094-6/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32-bit MIPS and some other systems, various of the lrint, llrint, lround, llround functions can be missing exceptions on overflow because casts do not (in current GCC) result in the proper exceptions. In the MIPS case there are two problems here: MIPS I code generation uses an assembler macro that doesn't raise exceptions, while the libgcc conversions of floating-point values to long long also do not raise "invalid" on all overflow cases (and can raise spurious "inexact"). This patch adds support in the generic code (only the functions for which this problem has actually been seen) for forcing the "invalid" exception in the problem cases, and enables that support for the affected MIPS cases. Tested for MIPS; also tested for x86_64 and x86 that installed stripped shared libraries are unchanged by this patch. [BZ #16399] * sysdeps/generic/fix-fp-int-convert-overflow.h: New file. * sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fix-fp-int-convert-overflow.h>. (__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lround.c: Include <fix-fp-int-convert-overflow.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file.
* Fix dbl-64 lrint for 64-bit long (bug 19095).Joseph Myers2015-10-091-1/+1
| | | | | | | | | | | | | | | The dbl-64 implementation of lrint produces incorrect results for some arguments with 64-bit long because a 32-bit (unsigned) low part of the mantissa is shifted left, losing high bits in the process. This patch fixes this by casting to long int before shifting, as in lround (as this case only applies for 64-bit long, there are no issues with sign-extension). Tested for mips64 (n64). [BZ #19095] * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of mantissa to long int before shifting left.
* Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094).Joseph Myers2015-10-081-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist. It also obviously cannot arise in FE_TOWARDZERO mode.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it is needed; unlike lround and llround, FE_INEXACT is required, not optional, for these functions for a within-range inexact result). The fixes are conditional on FE_INVALID or FE_INEXACT being defined. If any future architecture supports one but not both of those exceptions, the code will fail to compile and need fixing to handle that case (this seemed better than conditioning on both macros being defined, resulting in code that would compile but quietly miss exceptions on such a system). Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only relevant for ia64, it appears) on x86_64 by removing the x86_64 versions of lrintl / llrintl. [BZ #19094] * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and <limits.h>. (__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lrint_test_data): Add more tests. (llrint_test_data): Likewise.
* Fix lround, llround missing exceptions close to overflow threshold (bug 19088).Joseph Myers2015-10-072-5/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT). Tested for x86_64, x86 and mips64. [BZ #19088] * sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lround_test_data): Add more tests. (llround_test_data): Likewise.
* Use dbl-64/wordsize-64 for MIPS64.Joseph Myers2015-10-071-1/+0
| | | | | | | | | | | | This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for MIPS64 (both n64 and n32), removing a #error in one case now that case has been tested and found to work. Tested for mips64 (n64 and n32). * sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
* Don't use dbl-64/wordsize-64 lround based on llround for ILP32 (bug 19079).Joseph Myers2015-10-072-16/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | The implementation of lround in dbl-64/wordsize-64 as an alias or wrapper for llround is always incorrect when long is not 64-bit, because it misses required exceptions in overflow cases, as shown by my recently added tests. This patch removes that alias / wrapper in the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64 macro, restoring the previous version of lround for dbl-64/wordsize-64 (newly conditioned on !_LP64). Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64 enabled. [BZ #19079] * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous file, conditioned on [!_LP64]. * sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c [!_LP64] (__lround): Do not define as function or alias. [!_LP64] (lround): Likewise. [!_LP64] (__lroundl): Likewise. [!_LP64] (lroundl): Likewise. * sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove macro. * sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Likewise.
* Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug ↵Joseph Myers2015-10-054-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 19050). On powerpc32 hard-float, older processors (ones where fcfid is not available for 32-bit code), GCC generates conversions from integers to floating point that wrongly convert integer 0 to -0 instead of +0 in FE_DOWNWARD mode. This in turn results in logb and a few other functions wrongly returning -0 when they should return +0. This patch works around this issue in glibc as I proposed in <https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that the affected functions can be correct and the affected tests pass in the absence of a GCC fix for this longstanding issue (GCC bug 67771 - if fixed, of course we can put in GCC version conditionals, and eventually phase out the workarounds). A new macro FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that header defines the macro based on the results of a configure test for whether such conversions use the fcfid instruction. Tested for x86_64 (that installed stripped shared libraries are unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to 0 as expected and that the relevant tests are fixed). Also tested a build with GCC configured for -mcpu=power4 and verified that HAVE_PPC_FCFID comes out to 1 in that case. There are still some other issues to fix to get test-float and test-double passing cleanly for older powerpc32 processors (apart from the need for an ulps regeneration for powerpc). (test-ldouble will be harder to get passing cleanly, but with a combination of selected fixes to ldbl-128ibm code that don't involve significant performance issues, allowing spurious underflow and inexact exceptions for that format, and lots of XFAILing for the default case of unpatched libgcc, it should be doable.) [BZ #887] [BZ #19049] [BZ #19050] * sysdeps/generic/fix-int-fp-convert-zero.h: New file. * sysdeps/ieee754/dbl-64/e_log10.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/e_log2.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_erf.c: Include <fix-int-fp-convert-zero.h>. (__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_logb.c: Include <fix-int-fp-convert-zero.h>. (__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log10f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log2f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_erff.c: Include <fix-int-fp-convert-zero.h>. (__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_logbf.c: Include <fix-int-fp-convert-zero.h>. (__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <fix-int-fp-convert-zero.h>. (__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include <fix-int-fp-convert-zero.h>. (__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/powerpc/powerpc32/fpu/configure.ac: New file. * sysdeps/powerpc/powerpc32/fpu/configure: New generated file. * sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New file. * config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
* Fix clog, clog10 inaccuracy (bug 19016).Joseph Myers2015-09-282-16/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids cancellation error and then using log1p. However, the thresholds for using that approach still result in log being used on argument as large as sqrt(13/16) > 0.9, leading to significant errors, in some cases above the 9ulp maximum allowed in glibc libm. This patch arranges for the approach using log1p to be used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the existing allowance for cases where one of X and Y is very small), adjusting the __x2y2m1 functions to work with the wider range of inputs. This way, log only gets used on arguments below sqrt(1/2) (or substantially above 1), where the error involved is much less. Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration I removed the existing clog and clog10 ulps before regenerating to allow any reduced ulps to appear. Tests added include those found by random test generation to produce large ulps either before or after the patch, and some found by trying inputs close to the (0.75, 0.5) threshold where the potential errors from using log are largest. [BZ #19016] * sysdeps/generic/math_private.h (__x2y2m1f): Update comment to allow more cases with X^2 + Y^2 >= 0.5. * sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment. * sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise. * sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0] (__x2y2m1): Update comment. * sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * math/s_clog.c (__clog): Handle more cases using log1p without hypot. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/auto-libm-test-in: Add more tests of clog and clog10. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix pow missing underflows (bug 18825).Joseph Myers2015-09-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, pow functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes, thereby concluding the fixes for known bugs with missing underflow exceptions currently filed in Bugzilla. Tested for x86_64, x86, mips64 and powerpc. [BZ #18825] * sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN): New macro. (DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise. (LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise. * sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN. (__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of DBL_NARROW_EVAL, reloading the PIC register as needed. * sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN. (__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of FLT_NARROW_EVAL. Use separate return path for case when first argument is NaN. * sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the PIC register. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force underflow for subnormal result. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use math_check_force_underflow_nonneg. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use math_check_force_underflow. * sysdeps/x86_64/fpu/x86_64-math-asm.h (LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro. * sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated.
* Fix hypot missing underflows (bug 18803).Joseph Myers2015-09-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, hypot functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes. Note that this issue cannot arise for implementations of hypotf using double (or wider) for intermediate evaluation (if hypotf should underflow, that means the double square root is being computed of some number of the form N*2^-298, for 0 < N < 2^46, which is exactly represented as a double, and whatever the rounding mode such a square root cannot have a mantissa with all zeroes after the initial 23 bits). Thus no changes are made to hypotf implementations in this patch, only to hypot and hypotl. Tested for x86_64, x86, mips64 and powerpc. [BZ #18803] * sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN. (MO): New macro. (__ieee754_hypot) [PIC]: Load PIC register. (__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of DBL_NARROW_EVAL. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use math_check_force_underflow_nonneg in case where result might be tiny. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise. * math/auto-libm-test-in: Add more tests of hypot. * math/auto-libm-test-out: Regenerated.
* Refactor code forcing underflow exceptions.Joseph Myers2015-09-2317-81/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various floating-point functions have code to force underflow exceptions if a tiny result was computed in a way that might not have resulted in such exceptions even though the result is inexact. This typically uses math_force_eval to ensure that the underflowing expression is evaluated, but sometimes uses volatile. This patch refactors such code to use three new macros math_check_force_underflow, math_check_force_underflow_nonneg and math_check_force_underflow_complex (which in turn use math_force_eval). In the limited number of cases not suited to a simple conversion to these macros, existing uses of volatile are changed to use math_force_eval instead. The converted code does not always execute exactly the same sequence of operations as the original code, but the overall effects should be the same. Tested for x86_64, x86, mips64 and powerpc. * sysdeps/generic/math_private.h (fabs_tg): New macro. (min_of_type): Likewise. (math_check_force_underflow): Likewise. (math_check_force_underflow_nonneg): Likewise. (math_check_force_underflow_complex): Likewise. * math/e_exp2l.c (__ieee754_exp2l): Use math_check_force_underflow_nonneg. * math/k_casinh.c (__kernel_casinh): Likewise. * math/k_casinhf.c (__kernel_casinhf): Likewise. * math/k_casinhl.c (__kernel_casinhl): Likewise. * math/s_catan.c (__catan): Use math_check_force_underflow_complex. * math/s_catanf.c (__catanf): Likewise. * math/s_catanh.c (__catanh): Likewise. * math/s_catanhf.c (__catanhf): Likewise. * math/s_catanhl.c (__catanhl): Likewise. * math/s_catanl.c (__catanl): Likewise. * math/s_ccosh.c (__ccosh): Likewise. * math/s_ccoshf.c (__ccoshf): Likewise. * math/s_ccoshl.c (__ccoshl): Likewise. * math/s_cexp.c (__cexp): Likewise. * math/s_cexpf.c (__cexpf): Likewise. * math/s_cexpl.c (__cexpl): Likewise. * math/s_clog.c (__clog): Use math_check_force_underflow_nonneg. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/s_csin.c (__csin): Use math_check_force_underflow_complex. * math/s_csinf.c (__csinf): Likewise. * math/s_csinh.c (__csinh): Likewise. * math/s_csinhf.c (__csinhf): Likewise. * math/s_csinhl.c (__csinhl): Likewise. * math/s_csinl.c (__csinl): Likewise. * math/s_csqrt.c (__csqrt): Use math_check_force_underflow. * math/s_csqrtf.c (__csqrtf): Likewise. * math/s_csqrtl.c (__csqrtl): Likewise. * math/s_ctan.c (__ctan): Use math_check_force_underflow_complex. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * stdlib/strtod_l.c (round_and_return): Use math_force_eval instead of volatile. * sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/e_atanh.c (__ieee754_atanh): Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Do not use volatile when forcing underflow. * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise. * sysdeps/ieee754/dbl-64/s_atan.c (atan): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Use math_force_eval instead of volatile. * sysdeps/ieee754/dbl-64/s_log1p.c (__log1p): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/s_sin.c (__sin): Likewise. * sysdeps/ieee754/dbl-64/s_tan.c (tan): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/s_tanh.c (__tanh): Use math_check_force_underflow. * sysdeps/ieee754/flt-32/e_asinf.c (__ieee754_asinf): Likewise. * sysdeps/ieee754/flt-32/e_atanhf.c (__ieee754_atanhf): Likewise. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Use math_check_force_underflow. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise. * sysdeps/ieee754/flt-32/k_sinf.c (__kernel_sinf): Likewise. * sysdeps/ieee754/flt-32/k_tanf.c (__kernel_tanf): Likewise. * sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise. * sysdeps/ieee754/flt-32/s_atanf.c (__atanf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_log1pf.c (__log1pf): Likewise. * sysdeps/ieee754/flt-32/s_tanhf.c (__tanhf): Likewise. * sysdeps/ieee754/ldbl-128/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/k_tanl.c (__kernel_tanl): Likewise. * sysdeps/ieee754/ldbl-128/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Use math_force_eval instead of volatile. * sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_asinl.c (__ieee754_asinl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128ibm/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c (__kernel_tanl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_atanl.c (__atanl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-96/k_tanl.c (__kernel_tanl): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-96/s_asinhl.c (__asinhl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Use math_force_eval instead of volatile. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Use math_check_force_underflow.
* Use math_narrow_eval more consistently.Joseph Myers2015-09-237-61/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Where glibc code needs to avoid excess range and precision in floating-point arithmetic, code variously uses either asms or volatile to force the results of that arithmetic to memory; mostly this is conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint functions some use of volatile is unconditional (and is present unnecessarily in versions for long double). This patch make such code use the recently-added math_narrow_eval macro consistently, removing the unnecessary uses of volatile in long double lrint / llrint implementations completely. Tested for x86_64, x86, mips64 and powerpc. * math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval. * stdlib/strtod_l.c: Include <math_private.h>. (overflow_value): Use math_narrow_eval. (underflow_value): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise. (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf): Likewise. * sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise. (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use volatile. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use math_narrow_eval. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use volatile. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use math_narrow_eval. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise.
* Avoid excess range overflowing results from cosh, sinh, lgamma (bug 18980).Joseph Myers2015-09-183-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various i386 libm functions return values with excess range and precision; Wilco Dijkstra's patches to make isfinite etc. expand inline cause this pre-existing issue to result in test failures (when e.g. a result that overflows float but not long double gets counted as overflowing for some purposes but not others). This patch addresses those cases arising from functions defined in C, adding a math_narrow_eval macro that forces values to memory to eliminate excess precision if FLT_EVAL_METHOD indicates this is needed, and is a no-op otherwise. I'll convert existing uses of volatile and asm for this purpose to use the new macro later, once i386 has clean test results again (which requires fixes for .S files as well). Tested for x86_64 and x86. Committed. [BZ #18980] * sysdeps/generic/math_private.h: Include <float.h>. (math_narrow_eval): New macro. [FLT_EVAL_METHOD != 0] (excess_precision): Likewise. * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Use math_narrow_eval on overflowing return value. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Likewise. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise.
* Since we now inline isinf, isnan and isfinite in math.h, replace uses of ↵Wilco Dijkstra2015-09-184-77/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __isinf_ns(l/f) with isinf, and remove the unused inlines __isinf_ns(l/f), __isnan(f) and __finite(f). 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * include/math.h: Remove __isinf_ns, __isinf_nsf, __isinf_nsl. * math/Makefile: Remove isinf_ns.c. * math/divtc3.c (__divtc3): Replace __isinf_nsl with isinf. * math/multc3.c (__multc3): Likewise. * math/s_casin.c (__casin): Likewise. * math/s_casinf.c (__casinf): Likewise. * math/s_casinl.c (__casinl): Likewise. * math/s_cproj.c (__cproj): Likewise. * math/s_cprojf.c (__cprojf): Likewise. * math/s_cprojl.c (__cprofl): Likewise. * math/s_ctan.c (__ctan): Likewise. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * math/w_fmod.c (__fmod): Likewise. * math/w_fmodf.c (__fmodf): Likewise. * math/w_fmodl.c (_fmodl): Likewise. * math/w_remainder.c (__remainder): Likewise. * math/w_remainderf.c (__remainderf): Likewise. * math/w_remainderl.c (__remainderl): Likewise. * math/w_scalb.c (__scalb): Likewise. * math/w_scalbf.c (__scalbf): Likewise. * math/w_scalbl.c (__scalbl): Likewise. * sysdeps/ieee754/dbl-64/s_isinf_ns.c: Deleted file. * sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Replace __isinf_ns with isinf. * sysdeps/ieee754/dbl-64/wordsize-64/math_private.h: Deleted file. * sysdeps/ieee754/dbl-64/wordsize-64/s_isinf_ns.c: Deleted file. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Replace __isinf_nsf with isinf. * sysdeps/ieee754/flt-32/math_private.h: Deleted file. * sysdeps/ieee754/flt-32/s_isinf_nsf.c: Deleted file. * sysdeps/ieee754/ldbl-128/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-128/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_cprojl.c(__cprojll): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_ctanl.c(__ctanl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-128ibm/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-96/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-96/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf.
* Fix several build failures with GCC6 due to unused static variables.Wilco Dijkstra2015-09-183-7/+1
| | | | | | | | | | | | | | | | | 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * resolv/base64.c (rcsid): Remove unused static. * sysdeps/ieee754/dbl-64/atnat2.h (qpi1): Remove unused static. (tqpi1): Likewise. * sysdeps/ieee754/dbl-64/uexp.h (one): Likewise. * sysdeps/ieee754/dbl-64/upow.h (sqrt_2): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (one): Likewise. * sysdeps/ieee754/flt-32/s_cosf.c (one): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (zero): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (half): Likewise. * sysdeps/ieee754/ldbl-128/s_log1pl.c (maxlog): Likewise. * timezone/private.h (time_t_min): Likewise. (time_t_max): Likewise.
* Use the GCC builtin functions for the non-inlined signbit implementations.Wilco Dijkstra2015-09-181-6/+1
| | | | | | | | | | | | | 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * sysdeps/ieee754/dbl-64/s_signbit.c (__signbit): Use __builtin_signbit. * sysdeps/ieee754/flt-32/s_signbitf.c (__signbitf): Use __builtin_signbitf. * sysdeps/ieee754/ldbl-128/s_signbitl.c (__signbitl): Use __builtin_signbitl. * sysdeps/ieee754/ldbl-128ibm/s_signbitl.c (___signbitl): Likewise. * sysdeps/ieee754/ldbl-96/s_signbitl.c (__signbitl): Likewise.
* Reduce number of constants in __finite* (bug 15384).Joseph Myers2015-09-172-2/+2
| | | | | | | | | | | | | | | | | | | Bug 15384 notes that in __finite, two different constants are used that could be the same constant (the result only depends on the exponent of the floating-point representation), and that using the same constant is better for architectures where constants need loading from a constant pool. This patch implements that change. Tested for x86_64, mips64 and powerpc. [BZ #15384] * sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Use same constant as bit-mask as in subtraction. * sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c (__finite): Likewise. * sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise. * sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_finitel.c (__finitel): Likewise.
* Fix tgamma missing underflows (bug 18951).Joseph Myers2015-09-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, tgamma functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down are zero. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #18951] * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force underflow exception for small results. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * math/auto-libm-test-in: Add more tests of tgamma. * math/auto-libm-test-out: Regenerated.
* Make scalbn set errno (bug 6803).Joseph Myers2015-09-162-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noted in bug 6803, scalbn fails to set errno on overflow and underflow. This patch fixes this by making scalbn an alias of ldexp, which has exactly the same semantics (for floating-point types with radix 2) and already has wrappers that deal with setting errno, instead of an alias of the internal __scalbn (which ldexp calls). Notes: * Where compat symbols were defined for scalbn functions, I didn't change what they point to (to keep the patch minimal), so such compat symbols continue to go directly to the non-errno-setting functions. * Mike, I didn't do anything with the IA64 versions of these functions, where I think both the ldexp and scalbn functions already deal with setting errno. As a cleanup (not needed to fix this bug) however you might want to make those functions into aliases for IA64; there is no need for them to be separate function implementations at all. * This concludes the fix for bug 6803 since the scalb and scalbln cases of that bug were fixed some time ago. Tested for x86_64, x86, mips64 and powerpc. [BZ #6803] * math/s_ldexp.c (scalbn): Define as weak alias of __ldexp. [NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp. * math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf. * math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl. * sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias. * sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise. * sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise. * sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise. [NO_LONG_DOUBLE] (scalbnl): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn): Likewise. [NO_LONG_DOUBLE] (scalbnl): Likewise. * sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise. * sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove long_double_symbol calls. * sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise. * sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as strong alias of __ldexpl. (scalbnl): Define using long_double_symbol. * sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)): Remove alias. * sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise. * sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise. * math/libm-test.inc (scalbn_test_data): Add errno expectations. (scalbln_test_data): Add more errno expectations.
* Fix exp2 missing underflows (bug 16521).Joseph Myers2015-09-141-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various exp2 implementations in glibc can miss underflow exceptions when the scaling down part of the calculation is exact (or, in the x86 case, when the conversion from extended precision to the target precision is exact). This patch forces the exception in a similar way to previous fixes. The x86 exp2f changes may in fact not be needed for this purpose - it's likely to be the case that no argument of type float has an exp2 result so close to an exact subnormal float value that it equals that value when rounded to 64 bits (even taking account of variation between different x86 implementations). However, they are included for consistency with the changes to exp2 and so as to fix the exp2f part of bug 18875 by ensuring that excess range and precision is removed from underflowing return values. Tested for x86_64, x86 and mips64. [BZ #16521] [BZ #18875] * math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for small results. * sysdeps/i386/fpu/e_exp2.S (dbl_min): New object. (MO): New macro. (__ieee754_exp2): For small results, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_exp2f.S (flt_min): New object. (MO): New macro. (__ieee754_exp2f): For small results, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object. (MO): New macro. (__ieee754_exp2l): Force underflow exception for small results. * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise. * sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object. (MO): New macro. (__ieee754_exp2l): Force underflow exception for small results. * math/auto-libm-test-in: Add more tests or exp2. * math/auto-libm-test-out: Regenerated.
* Fix lgamma (negative) inaccuracy (bug 2542, bug 2543, bug 2558).Joseph Myers2015-09-103-0/+483
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing implementations of lgamma functions (except for the ia64 versions) use the reflection formula for negative arguments. This suffers large inaccuracy from cancellation near zeros of lgamma (near where the gamma function is +/- 1). This patch fixes this inaccuracy. For arguments above -2, there are no zeros and no large cancellation, while for sufficiently large negative arguments the zeros are so close to integers that even for integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation is not significant. Thus, it is only necessary to take special care about cancellation for arguments around a limited number of zeros. Accordingly, this patch uses precomputed tables of relevant zeros, expressed as the sum of two floating-point values. The log of the ratio of two sines can be computed accurately using log1p in cases where log would lose accuracy. The log of the ratio of two gamma(1-x) values can be computed using Stirling's approximation (the difference between two values of that approximation to lgamma being computable without computing the two values and then subtracting), with appropriate adjustments (which don't reduce accuracy too much) in cases where 1-x is too small to use Stirling's approximation directly. In the interval from -3 to -2, using the ratios of sines and of gamma(1-x) can still produce too much cancellation between those two parts of the computation (and that interval is also the worst interval for computing the ratio between gamma(1-x) values, which computation becomes more accurate, while being less critical for the final result, for larger 1-x). Because this can result in errors slightly above those accepted in glibc, this interval is instead dealt with by polynomial approximations. Separate polynomial approximations to (|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8 from -3 to -2, where n (-3 or -2) is the nearest integer to the 1/8-interval and x0 is the zero of lgamma in the relevant half-integer interval (-3 to -2.5 or -2.5 to -2). Together, the two approaches are intended to give sufficient accuracy for all negative arguments in the problem range. Outside that range, the previous implementation continues to be used. Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm with large negative arguments giving spurious "invalid" exceptions (exposed by newly added tests for cases this patch doesn't affect the logic for); I'll address those problems separately. [BZ #2542] [BZ #2543] [BZ #2558] * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call __lgamma_neg for arguments from -28.0 to -2.0. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call __lgamma_negf for arguments from -15.0 to -2.0. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r): Call __lgamma_negl for arguments from -33.0 to -2.0. * sysdeps/ieee754/dbl-64/lgamma_neg.c: New file. * sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise. * sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise. * sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise. * sysdeps/generic/math_private.h (__lgamma_negf): New prototype. (__lgamma_neg): Likewise. (__lgamma_negl): Likewise. (__lgamma_product): Likewise. (__lgamma_productl): Likewise. * math/Makefile (libm-calls): Add lgamma_neg and lgamma_product. * math/auto-libm-test-in: Add more tests of lgamma. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix fma spurious underflows (bug 18824).Joseph Myers2015-08-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various fma implementations have logic that, when computing fma (x, y, z) where z is large (so care needs taking to avoid internal overflow) but x * y is small, scale x * y up instead of down to avoid internal underflows resulting from scaling down. (In these cases, x * y is small enough that only its sign actually matters rather than the exact value.) The threshold for scaling up instead of down was correct for "if the unscaled values were multiplied, the low part of the multiplication could underflow", and the scaling was sufficient to ensure that the low part of the multiplication did not underflow (given that cases of very small x * y - less than half the least subnormal - were previously dealt with). However, the choice in the functions wasn't between scaling up or no scaling, but between scaling up and scaling down (scaling down actually being needed when x * y isn't so small compared to z and so the exact value does matter). Thus a larger threshold is needed to ensure that scaling down doesn't produce values the multiplication of whose low parts underflows. This patch increases the thresholds accordingly. Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c removed so that the ldbl-128 version gets tested instead of the soft-fp one). [BZ #18824] * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for scaling x * y up instead of down. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise. * math/auto-libm-test-in: Add more tests of fma. * math/auto-libm-test-out: Regenerated.
* Fix tanh missing underflows (bug 16520).Joseph Myers2015-08-131-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some tanh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16520] * sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>. (__tanh): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>. (__tanhf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of tanh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix tan missing underflows (bug 16517).Joseph Myers2015-08-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some tan implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16517] * sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>. (tan): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>. (__kernel_tanf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of tan. * math/auto-libm-test-out: Regenerated.
* Fix sinh missing underflows (bug 16519).Joseph Myers2015-08-061-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some sinh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16519] * sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>. (__ieee754_sinh): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>. (__ieee754_sinhf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of sinh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Improve tgamma accuracy (bug 18613).Joseph Myers2015-06-291-25/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In non-default rounding modes, tgamma can be slightly less accurate than permitted by glibc's accuracy goals. Part of the problem is error accumulation, addressed in this patch by setting round-to-nearest for internal computations. However, there was also a bug in the code dealing with computing pow (x + n, x + n) where x + n is not exactly representable, providing another source of error even in round-to-nearest mode; it was necessary to address both bugs to get errors for all testcases within glibc's accuracy goals. Given this second fix, accuracy in round-to-nearest mode is also improved (hence regeneration of ulps for tgamma should be from scratch - truncate libm-test-ulps or at least remove existing tgamma entries - so that the expected ulps can be reduced). Some additional complications also arose. Certain tgamma tests should strictly, according to IEEE semantics, overflow or not depending on the rounding mode; this is beyond the scope of glibc's accuracy goals for any function without exactly-determined results, but gen-auto-libm-tests doesn't handle being lax there as it does for underflow. (libm-test.inc also doesn't handle being lax about whether the result in cases very close to the overflow threshold is infinity or a finite value close to overflow, but that doesn't cause problems in this case though I've seen it cause problems with random test generation for some functions.) Thus, spurious-overflow markings, with a comment, are added to auto-libm-test-in (no bug in Bugzilla because the issue is with the testsuite, not a user-visible bug in glibc). And on x86, after the patch I saw ERANGE issues as previously reported by Carlos (see my commentary in <https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which needed addressing by ensuring excess range and precision were eliminated at various points if FLT_EVAL_METHOD != 0. I also noticed and fixed a cosmetic issue where 1.0f was used in long double functions and should have been 1.0L. This completes the move of all functions to testing in all rounding modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to remove the workaround for some functions not using ALL_RM_TEST. Tested for x86_64, x86, mips64 and powerpc. [BZ #18613] * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gamma_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammaf_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * math/libm-test.inc (tgamma_test_data): Remove one test. Moved to auto-libm-test-in. (tgamma_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Add one test of tgamma. Mark some other tests of tgamma with spurious-overflow. * math/auto-libm-test-out: Regenerated. * math/gen-libm-have-vector-test.sh: Do not check for START. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix j1, jn missing underflows (bug 16559).Joseph Myers2015-06-292-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, j1 and jn implementations can fail to raise the underflow exception when the internal computation is exact although the actual function is inexact. This patch forces the exception in a similar way to other such fixes. (The ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't need a change for this until spurious underflows in it are fixed.) Tested for x86_64, x86, mips64 and powerpc. [BZ #16559] * sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>. (__ieee754_j1): Force underflow exception for small results. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>. (__ieee754_j1f): Force underflow exception for small results. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>. (__ieee754_j1l): Force underflow exception for small results. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Add more tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
* Use round-to-nearest internally in jn, test with ALL_RM_TEST (bug 18602).Joseph Myers2015-06-251-153/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some existing jn tests, if run in non-default rounding modes, produce errors above those accepted in glibc, which causes problems for moving tests of jn to use ALL_RM_TEST. This patch makes jn set rounding to-nearest internally, as was done for yn some time ago, then computes the appropriate underflowing value for results that underflowed to zero in to-nearest, and moves the tests to ALL_RM_TEST. It does nothing about the general inaccuracy of Bessel function implementations in glibc, though it should make jn more accurate on average in non-default rounding modes through reduced error accumulation. The recomputation of results that underflowed to zero should as a side-effect fix some cases of bug 16559, where jn just used an exact zero, but that is *not* the goal of this patch and other cases of that bug remain unfixed. (Most of the changes in the patch are reindentation to add new scopes for SET_RESTORE_ROUND*.) Tested for x86_64, x86, powerpc and mips64. [BZ #16559] [BZ #18602] * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Set round-to-nearest internally then recompute results that underflowed to zero in the original rounding mode. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise * math/libm-test.inc (jn_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix sin, sincos missing underflows (bug 16526, bug 16538).Joseph Myers2015-06-231-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some sin and sincos implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16526] [BZ #16538] * sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>. (__sin): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>. (__kernel_sinf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>. (__kernel_sincosl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>. (__kernel_sincosl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>. (__kernel_sinf): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of sin and sincos. * math/auto-libm-test-out: Regenerated.
* Fix exp2, exp2f spurious underflows (bug 18219).Joseph Myers2015-06-231-1/+3
| | | | | | | | | | | | | | | | | | | | | The dbl-64 and flt-32 implementations of exp2 functions produce spurious underflow exceptions. The underlying reason is the same in both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably chosen a and b, where a has small magnitude so 2^a - 1 can be computed with a low-degree polynomial approximation, and (2^a - 1)*2^b can underflow even when the final result does not. This patch fixes this by adjusting the threshold for when scaling is used to avoid intermediate underflow so it works for any possible value of a where the final result would not underflow. Tested for x86_64 and x86. [BZ #18219] * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce threshold on absolute value of exponent for which scaling is used. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise. * math/auto-libm-test-in: Add more tests of exp2. * math/auto-libm-test-out: Regenerated.
* Fix expm1 missing underflows (bug 16353).Joseph Myers2015-06-222-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some expm1 implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. (The issue does not apply to the ldbl-* implementations or to those for x86 / x86_64 long double. The change to sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when previously fixing bug 16354; the bug in that implementation was previously latent, but the expm1 fixes stopped it being latent and so required it to be fixed to avoid spurious underflows from cosh.) Tested for x86_64 and x86. [BZ #16353] * sysdeps/i386/fpu/s_expm1.S (dbl_min): New object. (__expm1): Force underflow exception for arguments with small absolute value. * sysdeps/i386/fpu/s_expm1f.S (flt_min): New object. (__expm1f): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>. (__expm1): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>. (__expm1f): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh): Check for small arguments before calling __expm1. * math/auto-libm-test-in: Do not mark underflow exceptions as possibly missing for bug 16353. * math/auto-libm-test-out: Regenerated.
* Fix asinh missing underflows (bug 16350).Joseph Myers2015-06-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some asinh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86 and mips64. [BZ #16350] * sysdeps/i386/fpu/s_asinh.S (__asinh): Force underflow exception for arguments with small absolute value. * sysdeps/i386/fpu/s_asinhf.S (__asinhf): Likewise. * sysdeps/i386/fpu/s_asinhl.S (__asinhl): Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c: Include <float.h>. (__asinh): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/s_asinhf.c: Include <float.h>. (__asinhf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/s_asinhl.c: Include <float.h>. (__asinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Include <float.h>. (__asinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/s_asinhl.c: Include <float.h>. (__asinhl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Do not mark underflow exceptions as possibly missing for bug 16350. * math/auto-libm-test-out: Regenerated.
* This patch renames all uses of __isinf*, __isnan*, __finite* and __signbit* ↵Wilco Dijkstra2015-06-037-11/+11
| | | | to use standard C99 macros. This has no effect on generated code.
* 2015-05-28 Wilco Dijkstra <wdijkstr@arm.com>Wilco Dijkstra2015-05-281-5/+1
| | | | | * sysdeps/ieee754/dbl-64/s_fabs.c: (__fabs): Call __builtin_fabs. * sysdeps/ieee754/flt-32/s_fabsf.c: (__fabsf): Likewise.
* Fix lgamma implementations for -Wuninitialized.Joseph Myers2015-05-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you remove the "override CFLAGS += -Wno-uninitialized" in math/Makefile, you get errors from lgamma implementations of the form: ../sysdeps/ieee754/dbl-64/e_lgamma_r.c: In function '__ieee754_lgamma_r': ../sysdeps/ieee754/dbl-64/e_lgamma_r.c:297:13: error: 'nadj' may be used uninitialized in this function [-Werror=maybe-uninitialized] if(hx<0) r = nadj - r; This is one of the standard kinds of false positive uninitialized warnings: nadj is set under a certain condition, and then later used under the same condition. This patch uses DIAG_* macros to suppress the warning on the use of nadj. The ldbl-128 / ldbl-128ibm implementation has a substantially different structure that avoids this issue. Tested for x86_64. (In fact this patch eliminates the need for that -Wno-uninitialized on x86_64, but I want to test on more architectures before removing it.) * sysdeps/ieee754/dbl-64/e_lgamma_r.c: Include <libc-internal.h>. (__ieee754_lgamma_r): Ignore uninitialized warnings around use of NADJ. * sysdeps/ieee754/flt-32/e_lgammaf_r.c: Include <libc-internal.h>. (__ieee754_lgammaf_r): Ignore uninitialized warnings around use of NADJ. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c: Include <libc-internal.h>. (__ieee754_lgammal_r): Ignore uninitialized warnings around use of NADJ.
* Fix sysdeps/ieee754/dbl-64/mpa.c for -Wuninitialized.Joseph Myers2015-05-211-2/+3
| | | | | | | | | | | | | | | | | | | | If you remove the "override CFLAGS += -Wno-uninitialized" in math/Makefile, one of the errors you get is: ../sysdeps/ieee754/dbl-64/mpa.c: In function '__mp_dbl.part.0': ../sysdeps/ieee754/dbl-64/mpa.c:183:5: error: 'c' may be used uninitialized in this function [-Werror=maybe-uninitialized] c *= X[0]; The problem is that the p < 5 case initializes c if p is 1, 2, 3 or 4 but not otherwise, and in fact p is positive for all calls to this function so the uninitialized case can't actually occur. This patch replaces the "if (p == 4)" last case with a comment so the compiler can see that all paths do initialize c. Tested for x86_64. * sysdeps/ieee754/dbl-64/mpa.c (norm): Remove if condition on (p == 4) case.
* Fix atanhl missing underflows (bug 16352).Joseph Myers2015-05-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some atanh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. (No change in this regard is needed for the i386 implementation; special handling to force underflows in these cases will only be needed there when the spurious underflows, bug 18049, get fixed.) Tested for x86_64, x86, powerpc and mips64. [BZ #16352] * sysdeps/i386/fpu/e_atanh.S (dbl_min): New object. (__ieee754_atanh): Force underflow exception for results with small absolute value. * sysdeps/i386/fpu/e_atanhf.S (flt_min): New object. (__ieee754_atanhf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/dbl-64/e_atanh.c: Include <float.h>. (__ieee754_atanh): Force underflow exception for results with small absolute value. * sysdeps/ieee754/flt-32/e_atanhf.c: Include <float.h>. (__ieee754_atanhf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128/e_atanhl.c: Include <float.h>. (__ieee754_atanhl): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: Include <float.h>. (__ieee754_atanhl): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-96/e_atanhl.c: Include <float.h>. (__ieee754_atanhl): Force underflow exception for results with small absolute value. * math/auto-libm-test-in: Do not allow missing underflow exceptions from atanh. * math/auto-libm-test-out: Regenerated.
* Remove various ABS macros and replace uses with fabs (or in one case abs)Wilco Dijkstra2015-05-1511-85/+90
| | | | which is more efficient on all targets.
* Fix log1p missing underflows (bug 16339).Joseph Myers2015-05-141-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some log1p implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. (The ldbl-128ibm implementation doesn't currently need any change as it already generates this exception, albeit through code that would generate spurious exceptions in other cases; special code for this issue will only be needed there when fixing the spurious exceptions.) Tested for x86_64, x86, powerpc and mips64. [BZ #16339] * sysdeps/i386/fpu/s_log1p.S (dbl_min): New object. (__log1p): Force underflow exception for results with small absolute value. * sysdeps/i386/fpu/s_log1pf.S (flt_min): New object. (__log1pf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/dbl-64/s_log1p.c: Include <float.h>. (__log1p): Force underflow exception for results with small absolute value. * sysdeps/ieee754/flt-32/s_log1pf.c: Include <float.h>. (__log1pf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128/s_log1pl.c: Include <float.h>. (__log1pl): Force underflow exception for results with small absolute value. * math/auto-libm-test-in: Do not allow missing underflow exceptions from log1p. * math/auto-libm-test-out: Regenerated.
* Use __copysign rather than copysign.Wilco Dijkstra2015-04-221-1/+1
|
* Set errno for log1p on pole/domain error.Stefan Liebler2015-04-131-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to bug 6792, errno is not set to ERANGE/EDOM by calling log1p/log1pf/log1pl with x = -1 or x < -1. This patch adds a wrapper which sets errno in those cases and returns the value of the existing __log1p function. The log1p is now an alias to the wrapper function instead of __log1p. The files in sysdeps are reflecting these changes. The ia64 implementation sets errno by itself, thus the wrapper-file is empty. The libm-test is adjusted for log1p-tests to check errno. [BZ #6792] * math/w_log1p.c: New file. * math/w_log1pf.c: Likewise. * math/w_log1pl.c: Likewise. * math/Makefile (libm-calls): Add w_log1p. * math/s_log1pl.c (log1pl): Remove weak_alias. * sysdeps/i386/fpu/s_log1p.S (log1p): Likewise. * sysdeps/i386/fpu/s_log1pf.S (log1pf): Likewise. * sysdeps/i386/fpu/s_log1pl.S (log1pl): Likewise. * sysdeps/x86_64/fpu/s_log1pl.S (log1pl): Likewise. * sysdeps/ieee754/dbl-64/s_log1p.c (log1p): Likewise. [NO_LONG_DOUBLE] (log1pl): Likewise. * sysdeps/ieee754/flt-32/s_log1pf.c (log1pf): Likewise. * sysdeps/ieee754/ldbl-128/s_log1pl.c (log1pl): Likewise. * sysdeps/ieee754/ldbl-64-128/s_log1pl.c (log1p): Remove long_double_symbol. * sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (log1pl): Likewise. * sysdeps/ieee754/ldbl-64-128/w_log1pl.c: New file. * sysdeps/ieee754/ldbl-128ibm/w_log1pl.c: Likewise. * sysdeps/m68k/m680x0/fpu/s_log1p.c: Define empty weak_alias to remove weak_alias for corresponding log1p function. * sysdeps/m68k/m680x0/fpu/s_log1pf.c: Likewise. * sysdeps/m68k/m680x0/fpu/s_log1pl.c: Likewise. * sysdeps/ia64/fpu/w_log1p.c: New file. * sysdeps/ia64/fpu/w_log1pf.c: Likewise. * sysdeps/ia64/fpu/w_log1pl.c: Likewise. * math/libm-test.inc (log1p_test_data): Add errno expectations.
* Fix dbl-64 atan2 in non-default rounding modes (bug 18210, bug 18211).Joseph Myers2015-04-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | The dbl-64 implementation of atan2 does computations that expect to run in round-to-nearest mode, and in other modes the errors can accumulate to more than the maximum accepted 9ulp. This patch makes it use FE_TONEAREST internally, similar to other functions with such issues. Tests that previously produced large errors are added for atan2 and the closely related carg, clog and clog10 functions. Tested for x86_64 and x86 and ulps updated accordingly. [BZ #18210] [BZ #18211] * sysdeps/ieee754/dbl-64/e_atan2.c: Include <fenv.h>. (__ieee754_atan2): Set FE_TONEAREST mode for internal computations. * math/auto-libm-test-in: Add more tests of atan2, carg, clog and clog10. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix dbl-64 atan in non-default rounding modes (bug 18197).Joseph Myers2015-04-081-0/+2
| | | | | | | | | | | | | | | The dbl-64 implementation of atan does computations that expect to run in round-to-nearest mode, and in other modes the errors can accumulate to more than the maximum accepted 9ulp. This patch makes it use FE_TONEAREST internally, similar to other functions with such issues. Tested for x86_64 and x86; no ulps updates needed. [BZ #18197] * sysdeps/ieee754/dbl-64/s_atan.c: Include <fenv.h>. (atan): Set FE_TONEAREST mode for internal computations. * math/auto-libm-test-in: Add more tests of atan. * math/auto-libm-test-out: Regenerated.
* powerpc: Fix incorrect results for pow when using FMAAdhemerval Zanella2015-03-101-0/+1
| | | | | This patch adds no FMA generation for e_pow to avoid precision issues for powerpc. This fixes BZ#18104.
* Avoid uninitialized warnings in Bessel functions.Joseph Myers2015-02-262-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | math/Makefile currently has: # The fdlibm code generates a lot of these warnings but is otherwise clean. override CFLAGS += -Wno-uninitialized This is of course undesirable; warnings should be disabled as narrowly as possible. To remove this override, we need to fix files that generate such warnings, or put warning-disabling pragmas in them. This patch does so for Bessel function implementations, one of the cases that have the warnings if the override is removed. The warnings arise because functions set pointer variables p and q only for certain values of the function argument, then use them unconditionally. As the static functions in question only get called for arguments that satisfy the last condition in the if/else chain, the natural fix is to change the last "else if" to just "else", which this patch does. (The ldbl-128 / ldbl-128ibm implementation of these functions is substantially different and looks like it already does use "else" in the last case in the nearest corresponding code.) Tested for x86_64 and x86. * sysdeps/ieee754/dbl-64/e_j0.c (pzero): Change last case for setting p and q from "else if" to "else". (qzero): Likewise. * sysdeps/ieee754/dbl-64/e_j1.c (pone): Likewise. (qone): Likewise. * sysdeps/ieee754/flt-32/e_j0f.c (pzerof): Likewise. (qzerof): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (ponef): Likewise. (qonef): Likewise. * sysdeps/ieee754/ldbl-96/e_j0l.c (pzero): Likewise. (qzero): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (pone): Likewise. (qone): Likewise.
* Fix asin missing underflows (bug 16351).Joseph Myers2015-02-261-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some asin implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, powerpc and mips64. [BZ #16351] * sysdeps/i386/fpu/e_asin.S (dbl_min): New object. (MO): New macro. (__ieee754_asin): Force underflow exception for results with small absolute value. * sysdeps/i386/fpu/e_asinf.S (flt_min): New object. (MO): New macro. (__ieee754_asinf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/dbl-64/e_asin.c: Include <float.h> and <math.h>. (__ieee754_asin): Force underflow exception for results with small absolute value. * sysdeps/ieee754/flt-32/e_asinf.c: Include <float.h>. (__ieee754_asinf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128/e_asinl.c: Include <float.h>. (__ieee754_asinl): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128ibm/e_asinl.c: Include <float.h>. (__ieee754_asinl): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-96/e_asinl.c: Include <float.h>. (__ieee754_asinl): Force underflow exception for results with small absolute value. * sysdeps/x86_64/fpu/multiarch/e_asin.c [HAVE_FMA4_SUPPORT]: Include <math.h>. * math/auto-libm-test-in: Do not mark underflow exceptions as possibly missing for bug 16351. * math/auto-libm-test-out: Regenerated.
* Fix atan / atan2 missing underflows (bug 15319).Joseph Myers2015-02-182-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 15319, missing underflows from atan / atan2 when the result of atan is very close to its small argument (or that of atan2 is very close to the ratio of its arguments, which may be an exact division). The usual approach of doing an underflowing computation if the computed result is subnormal is followed. For 32-bit x86, there are extra complications: the inline __ieee754_atan2 in bits/mathinline.h needs to be disabled for float and double because other libm functions using it generally rely on getting proper underflow exceptions from it, while the out-of-line functions have to remove excess range and precision from the underflowing result so as to return an exact 0 in the case where errno should be set for underflow to 0. (The failures I saw without that are similar to those Carlos reported for other functions, where I haven't seen a response to <https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html> confirming if my diagnosis is correct. Arguably all libm functions with float and double returns should remove excess range and precision, but that's a separate matter.) The x86_64 long double case reported in a comment in bug 15319 is not a bug (it's an argument of LDBL_MIN, and x86_64 is an after-rounding architecture so the correct IEEE result is not to raise underflow in the given rounding mode, in addition to treating the result as an exact LDBL_MIN being within the newly clarified documentation of accuracy goals). I'm presuming that the fpatan instruction can be trusted to raise appropriate exceptions when the (long double) result underflows (after rounding) and so no changes are needed for x86 / x86_64 long double functions here; empirically this is the case for the cases covered in the testsuite, on my system. Tested for x86_64, x86, powerpc and mips64. Only 32-bit x86 needs ulps updates (for the changes to inlines meaning some functions no longer get excess precision from their __ieee754_atan2* calls). [BZ #15319] * sysdeps/i386/fpu/e_atan2.S (dbl_min): New object. (MO): New macro. (__ieee754_atan2): For results with small absolute value, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_atan2f.S (flt_min): New object. (MO): New macro. (__ieee754_atan2f): For results with small absolute value, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/s_atan.S (dbl_min): New object. (MO): New macro. (__atan): For results with small absolute value, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/s_atanf.S (flt_min): New object. (MO): New macro. (__atanf): For results with small absolute value, force underflow exception and remove excess range and precision from return value. * sysdeps/ieee754/dbl-64/e_atan2.c: Include <float.h> and <math.h>. (__ieee754_atan2): Force underflow exception for results with small absolute value. * sysdeps/ieee754/dbl-64/s_atan.c: Include <float.h> and <math_private.h>. (atan): Force underflow exception for results with small absolute value. * sysdeps/ieee754/flt-32/s_atanf.c: Include <float.h>. (__atanf): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128/s_atanl.c: Include <float.h> and <math.h>. (__atanl): Force underflow exception for results with small absolute value. * sysdeps/ieee754/ldbl-128ibm/s_atanl.c: Include <float.h>. (__atanl): Force underflow exception for results with small absolute value. * sysdeps/x86/fpu/bits/mathinline.h [!__SSE2_MATH__ && !__x86_64__ && __LIBC_INTERNAL_MATH_INLINES] (__ieee754_atan2): Only define inline for long double. * sysdeps/x86_64/fpu/multiarch/e_atan2.c [HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Include <math.h>. * math/auto-libm-test-in: Do not mark underflow exceptions as possibly missing for bug 15319. Add more tests of atan2. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (casin_test_data): Do not mark underflow exceptions as possibly missing for bug 15319. (casinh_test_data): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update.