about summary refs log tree commit diff
path: root/sysdeps/ia64/nptl
Commit message (Collapse)AuthorAgeFilesLines
* elf: Remove THREAD_GSCOPE_IN_TCBSergey Bugaev2021-09-161-1/+0
| | | | | | | | | All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all support for !THREAD_GSCOPE_IN_TCB, along with the definition itself. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-4-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* Remove "Contributed by" linesSiddhesh Poyarekar2021-09-033-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Remove remaining code from libpthreadFlorian Weimer2021-05-211-5/+0
| | | | | | | | | Only the placeholder compatibility symbols are left now. The __errno_location symbol was removed (moved) using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_spin_trylock into libcFlorian Weimer2021-04-231-1/+9
| | | | The symbol was moved using scripts/move-symbol-to-libc.py.
* nptl: Move pthread_spin_lock into libcFlorian Weimer2021-04-231-1/+9
| | | | The symbol was moved using scripts/move-symbol-to-libc.py.
* nptl: Move pthread_spin_init, Move pthread_spin_unlock into libcFlorian Weimer2021-04-231-2/+9
| | | | | | | For some architectures, the two functions are aliased, so these symbols need to be moved at the same time. The symbols were moved using scripts/move-symbol-to-libc.py.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-027-7/+7
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* nptl: Move stack list variables into _rtld_globalFlorian Weimer2020-11-161-2/+0
| | | | | | | | | Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT, formerly __wait_lookup_done) can be implemented directly in ld.so, eliminating the unprotected GL (dl_wait_lookup_done) function pointer. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: enforce >=64K guard size [BZ #26691]Szabolcs Nagy2020-10-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | There are several compiler implementations that allow large stack allocations to jump over the guard page at the end of the stack and corrupt memory beyond that. See CVE-2017-1000364. Compilers can emit code to probe the stack such that the guard page cannot be skipped, but on aarch64 the probe interval is 64K by default instead of the minimum supported page size (4K). This patch enforces at least 64K guard on aarch64 unless the guard is disabled by setting its size to 0. For backward compatibility reasons the increased guard is not reported, so it is only observable by exhausting the address space or parsing /proc/self/maps on linux. On other targets the patch has no effect. If the stack probe interval is larger than a page size on a target then ARCH_MIN_GUARD_SIZE can be defined to get large enough stack guard on libc allocated stacks. The patch does not affect threads with user allocated stacks. Fixes bug 26691.
* semaphore: consolidate arch headers into a generic oneVineet Gupta2020-05-061-35/+0
| | | | | | | | | | | | | | | | | | This consolidates the copy-pasted arch specific semaphore header into single version (based on s390) which suffices 32-bit and and 64-bit arch/ABI based on the canonical WORDSIZE. For now I've left out arches which use alternate defines to choose for 32 vs 64-bit builds (aarch64, mips) which in theory can also use the same header. Passes build-many for aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64 x86_64-linux-gnu microblaze-linux-gnu nios2-linux-gnu Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ia64: Remove sigprocmask/sigblock objects from libpthreadAdhemerval Zanella2020-04-211-2/+2
| | | | | | | | | | | | | It is required because __libc_unwind_longjmp (used on thread cancellation) calls __sigprocmask. Replace with a direct call. They are required because __libc_unwind_longjmp (used for thread cancellation) calls __sigprocmask. Replace this with a direct call. The sigblock function is not exported and is not used internally, so it can be removed. Checked on cross build for ia64-linux-gnu.
* nptl: add missing pthread-offsets.hAndreas Schwab2020-02-101-0/+3
| | | | | All architectures using their own definition of struct __pthread_rwlock_arch_t need to provide their own pthread-offsets.h.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-018-8/+8
|
* nptl: Add default pthread-offsets.hAdhemerval Zanella2019-11-261-3/+0
| | | | | | | | | | This patch adds a default pthread-offsets.h based on default thread definitions from struct_mutex.h and struct_rwlock.h. The idea is to simplify new ports inclusion. Checked with a build on affected abis. Change-Id: I7785a9581e651feb80d1413b9e03b5ac0452668a
* nptl: Add default pthreadtypes-arch.hAdhemerval Zanella2019-11-261-35/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch adds a default pthreadtypes-arch.h, the idea is to simpify new ports inclusion and an override is required only if the architecture adds some arch-specific extensions or requirement. The default values on the new generic header are based on current architecture define value and they are not optimal compared to current code requirements as below. - On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is sizeof (struct pthread_barrier) is 20 bytes. - On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while sizeof (struct pthread_attr) is 32. The default values are not changed so the generic header could be used by some architectures. Checked with a build on affected abis. Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
* nptl: Add struct_rwlock.hAdhemerval Zanella2019-11-262-19/+43
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic __pthread_rwlock_arch_t definition meant to be used by new ports. Its layout mimics the current usage on some 64 bits ports and it allows some ports to use the generic definition. The arch __pthread_rwlock_arch_t definition is moved from pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h). Also the static intialization macro for pthread_rwlock_t is set to use an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its implementation. The default pthread_rwlock_t layout differs from current ports with: 1. Internal layout is the same for 32 bits and 64 bits. 2. Internal flag is an unsigned short so it should not required additional padding to align for word boundary (if it is the case for the ABI). Checked with a build on affected abis. Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
* nptl: Add struct_mutex.hAdhemerval Zanella2019-11-261-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current way of defining the common mutex definition for POSIX and C11 on pthreadtypes-arch.h (added by commit 06be6368da16104be5) is not really the best options for newer ports. It requires define some misleading flags that should be always defined as 0 (__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it exposes options used solely for linuxthreads compat mode (__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and requires newer ports to explicit define them (adding more boilerplate code). This patch adds a new default __pthread_mutex_s definition meant to be used by newer ports. Its layout mimics the current usage on both 32 and 64 bits ports and it allows most ports to use the generic definition. Only ports that use some arch-specific definition (such as hardware lock-elision or linuxthreads compat) requires specific headers. For 32 bit, the generic definitions mimic the other 32-bit ports of using an union to define the fields uses on adaptive and robust mutexes (thus not allowing both usage at same time) and by using a single linked-list for robust mutexes. Both decisions seemed to follow what recent ports have done and make the resulting pthread_mutex_t/mtx_t object smaller. Also the static intialization macro for pthread_mutex_t is set to use a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine in its struct_mutex.h if it requires additional fields to be initialized. Checked with a build on affected abis. Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
* nptl: Remove rwlock elision definitionsAdhemerval Zanella2019-11-261-2/+0
| | | | | | | | | | The new rwlock implementation added by cc25c8b4c1196 (2.25) removed support for lock-elision. This patch removes remaining the arch-specific unused definitions. Checked with a build against all affected ABIs. Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
* nptl: Add tests for internal pthread_rwlock_t offsetsAdhemerval Zanella2019-11-261-0/+2
| | | | | | | | | | | | | This patch new build tests to check for internal fields offsets for internal pthread_rwlock_t definition. Althoug the '__data.__flags' field layout should be preserved due static initializators, the patch also adds tests for the futexes that may be used in a shared memory (although using different libc version in such scenario is not really supported). Checked with a build against all affected ABIs. Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
* nptl: Cleanup mutex internal offset testsAdhemerval Zanella2019-11-261-4/+0
| | | | | | | | | | | | | The offsets of pthread_mutex_t __data.__nusers, __data.__spins, __data.elision, __data.list are not required to be constant over the releases. Only the __data.__kind is used for static initializers. This patch also adds an additional size check for __data.__kind. Checked with a build against affected ABIs. Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-078-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-018-8/+8
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* hurd: add gscope supportSamuel Thibault2018-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-018-8/+8
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}Adhemerval Zanella2017-11-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two new internal defines to set the internal pthread_mutex_t layout required by the supported ABIS: 1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define __nusers fields before or after __kind. The preferred value for is 0 for new ports and it sets __nusers before __kind. 2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and __list members will be place inside an union for linuxthreads compatibility. The preferred value is 0 for ports and it sets to not use an union to define both fields. It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32. Checked with a make check run-built-tests=no on all afected ABIs. [BZ #22298] * nptl/allocatestack.c (allocate_stack): Check if __PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if __PTHREAD_MUTEX_HAVE_PREV is defined. * nptl/descr.h (pthread): Likewise. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. (__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE for internal layout. (__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE whether to use an union for __spins and __list fields. (__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION case. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add tests for internal pthread_mutex_t offsetsAdhemerval Zanella2017-11-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Move shared pthread definitions to common headersAdhemerval Zanella2017-05-092-190/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes all the replicated pthread definition accross the architectures and consolidates it on shared headers. The new organization is as follow: * Architecture specific definition (such as pthread types sizes) are place in the new pthreadtypes-arch.h header in arch specific path. * All shared structure definition are moved to a common NPTL header at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch specific one for internal definitions). * Also, for C11 future thread support, both mutex and condition definition are placed in a common header at sysdeps/nptl/bits/thread-shared-types.h. It is also a refactor patch without expected functional changes. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * posix/Makefile (headers): Add pthreadtypes-arch.h and thread-shared-types.h. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch specific thread definition. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nptl/bits/thread-shared-types.h: New file: shared thread definition between POSIX and C11. * sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file. * sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nptl/bits/pthreadtypes.h: New file: common thread definitions shared across all architectures.
* New pthread rwlock that is more scalable.Torvald Riegel2017-01-101-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This replaces the pthread rwlock with a new implementation that uses a more scalable algorithm (primarily through not using a critical section anymore to make state changes). The fast path for rdlock acquisition and release is now basically a single atomic read-modify write or CAS and a few branches. See nptl/pthread_rwlock_common.c for details. * nptl/DESIGN-rwlock.txt: Remove. * nptl/lowlevelrwlock.sym: Remove. * nptl/Makefile: Add new tests. * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, PTHREAD_RWLOCK_FUTEX_USED): New. * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new implementation. * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. (__pthread_rwlock_rdlock): Adapt. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Adapt. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Adapt. * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. (__pthread_rwlock_wrlock): Adapt. * nptl/tst-rwlock10.c: Adapt. * nptl/tst-rwlock11.c: Adapt. * nptl/tst-rwlock17.c: New file. * nptl/tst-rwlock18.c: New file. * nptl/tst-rwlock19.c: New file. * nptl/tst-rwlock2b.c: New file. * nptl/tst-rwlock8.c: Adapt. * nptl/tst-rwlock9.c: Adapt. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * nptl/nptl-printers.py (): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-rwlock-printers.py: Adapt. * nptl/test-rwlockattr-printers.c: Adapt. * nptl/test-rwlockattr-printers.py: Adapt.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-018-8/+8
|
* New condvar implementation that provides stronger ordering guarantees.Torvald Riegel2016-12-311-9/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new implementation for condition variables, required after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In essence, we need to be stricter in which waiters a signal or broadcast is required to wake up; this couldn't be solved using the old algorithm. ISO C++ made a similar clarification, so this also fixes a bug in current libstdc++, for example. We can't use the old algorithm anymore because futexes do not guarantee to wake in FIFO order. Thus, when we wake, we can't simply let any waiter grab a signal, but we need to ensure that one of the waiters happening before the signal is woken up. This is something the previous algorithm violated (see bug 13165). There's another issue specific to condvars: ABA issues on the underlying futexes. Unlike mutexes that have just three states, or semaphores that have no tokens or a limited number of them, the state of a condvar is the *order* of the waiters. A waiter on a semaphore can grab a token whenever one is available; a condvar waiter must only consume a signal if it is eligible to do so as determined by the relative order of the waiter and the signal. Therefore, this new algorithm maintains two groups of waiters: Those eligible to consume signals (G1), and those that have to wait until previous waiters have consumed signals (G2). Once G1 is empty, G2 becomes the new G1. 64b counters are used to avoid ABA issues. This condvar doesn't yet use a requeue optimization (ie, on a broadcast, waking just one thread and requeueing all others on the futex of the mutex supplied by the program). I don't think doing the requeue is necessarily the right approach (but I haven't done real measurements yet): * If a program expects to wake many threads at the same time and make that scalable, a condvar isn't great anyway because of how it requires waiters to operate mutually exclusive (due to the mutex usage). Thus, a thundering herd problem is a scalability problem with or without the optimization. Using something like a semaphore might be more appropriate in such a case. * The scalability problem is actually at the mutex side; the condvar could help (and it tries to with the requeue optimization), but it should be the mutex who decides how that is done, and whether it is done at all. * Forcing all but one waiter into the kernel-side wait queue of the mutex prevents/avoids the use of lock elision on the mutex. Thus, it prevents the only cure against the underlying scalability problem inherent to condvars. * If condvars use short critical sections (ie, hold the mutex just to check a binary flag or such), which they should do ideally, then forcing all those waiter to proceed serially with kernel-based hand-off (ie, futex ops in the mutex' contended state, via the futex wait queues) will be less efficient than just letting a scalable mutex implementation take care of it. Our current mutex impl doesn't employ spinning at all, but if critical sections are short, spinning can be much better. * Doing the requeue stuff requires all waiters to always drive the mutex into the contended state. This leads to each waiter having to call futex_wake after lock release, even if this wouldn't be necessary. [BZ #13165] * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to use new algorithm. * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. (__condvar_confirm_wakeup, __condvar_cancel_waiting, __condvar_cleanup_waiting, __condvar_dec_grefs, __pthread_cond_wait_common): New. (__condvar_cleanup): Remove. * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): Likewise. * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. * nptl/tst-cond1.c: Add comment. * nptl/tst-cond20.c (do_test): Adapt. * nptl/tst-cond22.c (do_test): Likewise. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt structure. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. (COND_CLOCK_BITS): Adapt. * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, __PTHREAD_COND_SHARED_MASK): New. * nptl/nptl-printers.py (CLOCK_IDS): Remove. (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-cond-printers.py: Adapt. * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, cond_compat_check_and_clear): Adapt. * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_timedwait): ... and move here. * nptl/DESIGN-condvar.txt: Remove file. * nptl/lowlevelcond.sym: Likewise. * nptl/pthread_cond_timedwait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
* Remove cached PID/TID in cloneAdhemerval Zanella2016-11-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
* nptl: Document the reason why __kind in pthread_mutex_t is part of the ABIFlorian Weimer2016-11-071-1/+1
|
* Remove the ptw-% patternsFlorian Weimer2016-09-141-2/+2
| | | | | | | | | | Nothing depends on the PTW macro anymore, so the mechanism to define PTW for recompliations of libc routines is no longer needed. The source files are still recompiled for the nptl directory, just without the “ptw-” prefix. (Reducing the number of pattern rules in sysd-rules is critical for improving make performance.)
* Do not override objects in libc.a in other static libraries [BZ #20452]Florian Weimer2016-08-171-0/+1
| | | | | With this change, we no longer add sysdep.o and similar objects which are present in libc.a to other static libraries.
* elf: Consolidate machine-agnostic DTV definitions in <dl-dtv.h>Florian Weimer2016-06-201-13/+1
| | | | | Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were repeated for all architectures using DTVs.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-048-8/+8
|
* Convert 231 sysdeps function definitions to prototype style.Joseph Myers2015-10-192-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mostly automatically-generated patch converts 231 sysdeps function definitions in glibc from old-style K&R to prototype-style. For __aio_sigqueue and __gai_sigqueue I had to add internal_function to the definitions as noted by Florian in <https://sourceware.org/ml/libc-alpha/2015-10/msg00595.html> to keep the functions compiling on x86 after conversion to prototype definitions. Otherwise, the patch is automatically generated with all the same exclusions and caveats as in <https://sourceware.org/ml/libc-alpha/2015-10/msg00594.html> except that it's a patch for sysdeps files. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Also tested for arm, mips64 and powerpc32 that installed stripped shared libraries are unchanged by the patch. * sysdeps/arm/backtrace.c (__backtrace): Convert to prototype-style function definition. * sysdeps/i386/backtrace.c (__backtrace): Likewise. * sysdeps/i386/ffs.c (__ffs): Likewise. * sysdeps/i386/i686/ffs.c (__ffs): Likewise. * sysdeps/ia64/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/ia64/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/m68k/ffs.c (__ffs): Likewise. * sysdeps/m68k/m680x0/fpu/e_acos.c (FUNC): Likewise. * sysdeps/m68k/m680x0/fpu/e_fmod.c (FUNC): Likewise. * sysdeps/mach/adjtime.c (__adjtime): Likewise. * sysdeps/mach/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/mach/hurd/_exit.c (_exit): Likewise. * sysdeps/mach/hurd/access.c (__access): Likewise. * sysdeps/mach/hurd/adjtime.c (__adjtime): Likewise. * sysdeps/mach/hurd/chdir.c (__chdir): Likewise. * sysdeps/mach/hurd/chmod.c (__chmod): Likewise. * sysdeps/mach/hurd/chown.c (__chown): Likewise. * sysdeps/mach/hurd/cthreads.c (cthread_keycreate): Likewise. (cthread_getspecific): Likewise. (cthread_setspecific): Likewise. (__libc_getspecific): Likewise. * sysdeps/mach/hurd/euidaccess.c (__euidaccess): Likewise. * sysdeps/mach/hurd/faccessat.c (faccessat): Likewise. * sysdeps/mach/hurd/fchdir.c (__fchdir): Likewise. * sysdeps/mach/hurd/fchmod.c (__fchmod): Likewise. * sysdeps/mach/hurd/fchmodat.c (fchmodat): Likewise. * sysdeps/mach/hurd/fchown.c (__fchown): Likewise. * sysdeps/mach/hurd/fchownat.c (fchownat): Likewise. * sysdeps/mach/hurd/flock.c (__flock): Likewise. * sysdeps/mach/hurd/fsync.c (fsync): Likewise. * sysdeps/mach/hurd/ftruncate.c (__ftruncate): Likewise. * sysdeps/mach/hurd/getgroups.c (__getgroups): Likewise. * sysdeps/mach/hurd/gethostname.c (__gethostname): Likewise. * sysdeps/mach/hurd/getitimer.c (__getitimer): Likewise. * sysdeps/mach/hurd/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/mach/hurd/getpgid.c (__getpgid): Likewise. * sysdeps/mach/hurd/getrusage.c (__getrusage): Likewise. * sysdeps/mach/hurd/getsockname.c (__getsockname): Likewise. * sysdeps/mach/hurd/group_member.c (__group_member): Likewise. * sysdeps/mach/hurd/isatty.c (__isatty): Likewise. * sysdeps/mach/hurd/lchown.c (__lchown): Likewise. * sysdeps/mach/hurd/link.c (__link): Likewise. * sysdeps/mach/hurd/linkat.c (linkat): Likewise. * sysdeps/mach/hurd/listen.c (__listen): Likewise. * sysdeps/mach/hurd/mkdir.c (__mkdir): Likewise. * sysdeps/mach/hurd/mkdirat.c (mkdirat): Likewise. * sysdeps/mach/hurd/openat.c (__openat): Likewise. * sysdeps/mach/hurd/poll.c (__poll): Likewise. * sysdeps/mach/hurd/readlink.c (__readlink): Likewise. * sysdeps/mach/hurd/readlinkat.c (readlinkat): Likewise. * sysdeps/mach/hurd/recv.c (__recv): Likewise. * sysdeps/mach/hurd/rename.c (rename): Likewise. * sysdeps/mach/hurd/renameat.c (renameat): Likewise. * sysdeps/mach/hurd/revoke.c (revoke): Likewise. * sysdeps/mach/hurd/rewinddir.c (__rewinddir): Likewise. * sysdeps/mach/hurd/rmdir.c (__rmdir): Likewise. * sysdeps/mach/hurd/seekdir.c (seekdir): Likewise. * sysdeps/mach/hurd/send.c (__send): Likewise. * sysdeps/mach/hurd/setdomain.c (setdomainname): Likewise. * sysdeps/mach/hurd/setegid.c (setegid): Likewise. * sysdeps/mach/hurd/seteuid.c (seteuid): Likewise. * sysdeps/mach/hurd/setgid.c (__setgid): Likewise. * sysdeps/mach/hurd/setgroups.c (setgroups): Likewise. * sysdeps/mach/hurd/sethostid.c (sethostid): Likewise. * sysdeps/mach/hurd/sethostname.c (sethostname): Likewise. * sysdeps/mach/hurd/setlogin.c (setlogin): Likewise. * sysdeps/mach/hurd/setpgid.c (__setpgid): Likewise. * sysdeps/mach/hurd/setregid.c (__setregid): Likewise. * sysdeps/mach/hurd/setreuid.c (__setreuid): Likewise. * sysdeps/mach/hurd/settimeofday.c (__settimeofday): Likewise. * sysdeps/mach/hurd/setuid.c (__setuid): Likewise. * sysdeps/mach/hurd/shutdown.c (shutdown): Likewise. * sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigpending.c (sigpending): Likewise. * sysdeps/mach/hurd/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/mach/hurd/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/mach/hurd/socket.c (__socket): Likewise. * sysdeps/mach/hurd/symlink.c (__symlink): Likewise. * sysdeps/mach/hurd/symlinkat.c (symlinkat): Likewise. * sysdeps/mach/hurd/telldir.c (telldir): Likewise. * sysdeps/mach/hurd/truncate.c (__truncate): Likewise. * sysdeps/mach/hurd/umask.c (__umask): Likewise. * sysdeps/mach/hurd/unlink.c (__unlink): Likewise. * sysdeps/mach/hurd/unlinkat.c (unlinkat): Likewise. * sysdeps/mips/mips64/__longjmp.c (__longjmp): Likewise. * sysdeps/posix/alarm.c (alarm): Likewise. * sysdeps/posix/cuserid.c (cuserid): Likewise. * sysdeps/posix/dirfd.c (dirfd): Likewise. * sysdeps/posix/dup.c (__dup): Likewise. * sysdeps/posix/dup2.c (__dup2): Likewise. * sysdeps/posix/euidaccess.c (euidaccess): Likewise. (main): Likewise. * sysdeps/posix/flock.c (__flock): Likewise. * sysdeps/posix/fpathconf.c (__fpathconf): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/posix/gethostname.c (__gethostname): Likewise. * sysdeps/posix/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/posix/isatty.c (__isatty): Likewise. * sysdeps/posix/killpg.c (killpg): Likewise. * sysdeps/posix/libc_fatal.c (__libc_fatal): Likewise. * sysdeps/posix/mkfifoat.c (mkfifoat): Likewise. * sysdeps/posix/raise.c (raise): Likewise. * sysdeps/posix/remove.c (remove): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/posix/rewinddir.c (__rewinddir): Likewise. * sysdeps/posix/seekdir.c (seekdir): Likewise. * sysdeps/posix/sigblock.c (__sigblock): Likewise. * sysdeps/posix/sigignore.c (sigignore): Likewise. * sysdeps/posix/sigintr.c (siginterrupt): Likewise. * sysdeps/posix/signal.c (__bsd_signal): Likewise. * sysdeps/posix/sigset.c (sigset): Likewise. * sysdeps/posix/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/posix/sysconf.c (__sysconf): Likewise. * sysdeps/posix/sysv_signal.c (__sysv_signal): Likewise. * sysdeps/posix/time.c (time): Likewise. * sysdeps/posix/ttyname.c (getttyname): Likewise. (ttyname): Likewise. * sysdeps/posix/ttyname_r.c (__ttyname_r): Likewise. * sysdeps/posix/utime.c (utime): Likewise. * sysdeps/powerpc/fpu/s_isnan.c (__isnan): Likewise. * sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/pthread/aio_error.c (aio_error): Likewise. * sysdeps/pthread/aio_read.c (aio_read): Likewise. * sysdeps/pthread/aio_read64.c (aio_read64): Likewise. * sysdeps/pthread/aio_write.c (aio_write): Likewise. * sysdeps/pthread/aio_write64.c (aio_write64): Likewise. * sysdeps/pthread/flockfile.c (__flockfile): Likewise. * sysdeps/pthread/ftrylockfile.c (__ftrylockfile): Likewise. * sysdeps/pthread/funlockfile.c (__funlockfile): Likewise. * sysdeps/pthread/timer_create.c (timer_create): Likewise. * sysdeps/pthread/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/pthread/timer_gettime.c (timer_gettime): Likewise. * sysdeps/s390/ffs.c (__ffs): Likewise. * sysdeps/s390/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/sh/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/sparc/nptl/pthread_barrier_destroy.c (pthread_barrier_destroy): Likewise. * sysdeps/sparc/nptl/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/e_sqrt.c (__ieee754_sqrt): Likewise. * sysdeps/sparc/sparc32/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/sem_init.c (__old_sem_init): Likewise. * sysdeps/tile/memcmp.c (memcmp_common_alignment): Likewise. (memcmp_not_common_alignment): Likewise. (MEMCMP): Likewise. * sysdeps/tile/wordcopy.c (_wordcopy_fwd_aligned): Likewise. (_wordcopy_fwd_dest_aligned): Likewise. (_wordcopy_bwd_aligned): Likewise. (_wordcopy_bwd_dest_aligned): Likewise. * sysdeps/unix/bsd/ftime.c (ftime): Likewise. * sysdeps/unix/bsd/gtty.c (gtty): Likewise. * sysdeps/unix/bsd/stty.c (stty): Likewise. * sysdeps/unix/bsd/tcflow.c (tcflow): Likewise. * sysdeps/unix/bsd/tcflush.c (tcflush): Likewise. * sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/bsd/tcgetpgrp.c (tcgetpgrp): Likewise. * sysdeps/unix/bsd/tcsendbrk.c (tcsendbreak): Likewise. * sysdeps/unix/bsd/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/bsd/tcsetpgrp.c (tcsetpgrp): Likewise. * sysdeps/unix/bsd/ualarm.c (ualarm): Likewise. * sysdeps/unix/bsd/wait3.c (__wait3): Likewise. * sysdeps/unix/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/unix/sockatmark.c (sockatmark): Likewise. * sysdeps/unix/stime.c (stime): Likewise. * sysdeps/unix/sysv/linux/_exit.c (_exit): Likewise. * sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/arm/sigaction.c (__libc_sigaction): Convert to prototype-style function definition. * sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise. * sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise. * sysdeps/unix/sysv/linux/fpathconf.c (__fpathconf): Likewise. * sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/gethostid.c (sethostid): Convert to prototype-style function definition * sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid): Likewise. (__getlogin_r): Likewise. * sysdeps/unix/sysv/linux/getpt.c (__posix_openpt): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_broadcast.c (__pthread_cond_broadcast): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_init.c (__pthread_cond_init): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_wait): Likewise. * sysdeps/unix/sysv/linux/i386/getmsg.c (getmsg): Likewise. * sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise. * sysdeps/unix/sysv/linux/ia64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/ia64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/ia64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c (__ftruncate64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c (truncate64): Likewise. * sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/pthread_getcpuclockid.c (pthread_getcpuclockid): Likewise. * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_sigmask.c (pthread_sigmask): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/semget.c (semget): Likewise. * sysdeps/unix/sysv/linux/semop.c (semop): Likewise. * sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise. * sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise. * sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise. * sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise. * sysdeps/unix/sysv/linux/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise. * sysdeps/unix/sysv/linux/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/speed.c (cfgetospeed): Likewise. (cfgetispeed): Likewise. (cfsetospeed): Likewise. (cfsetispeed): Likewise. * sysdeps/unix/sysv/linux/tcflow.c (tcflow): Likewise. * sysdeps/unix/sysv/linux/tcflush.c (tcflush): Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/sysv/linux/time.c (time): Likewise. * sysdeps/unix/sysv/linux/timer_create.c (timer_create): Likewise. * sysdeps/unix/sysv/linux/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/x86_64/backtrace.c (__backtrace): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-028-8/+8
|
* NPTL: Clean up THREAD_SYSINFO macros.Roland McGrath2014-10-171-1/+5
|
* IA64: Move NPTL public headers to sysdeps/ia64/nptl/.Roland McGrath2014-08-042-0/+212
|
* IA64: Define TLS_DEFINE_INIT_TPRoland McGrath2014-08-041-0/+4
|
* Move architecture shlib-versions files to Linux-specific directories.Joseph Myers2014-07-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various architectures have files such as sysdeps/<arch>/shlib-versions whose contents are in fact entirely Linux-specific, relating only to the symbol / shared library versions for the port to Linux on that architecture, when any future port to a different OS on that architecture would use the symbol version of the glibc release it goes in, as standard for new ports. This patch moves such files under sysdeps/unix/sysv/linux/, merging in the contents of sysdeps/<arch>/nptl/shlib-versions in the process. The only bits not moved are those relating to libgcc_s versions, which don't appear OS-specific in the same way that glibc's symbol versions so. It deliberately does not change the regular expressions given for matching configurations in each file; some match only Linux although not Linux-specific, or match other OSes although Linux-specific. It is with a view to at least the following further cleanups: * Move architecture-specific content from the toplevel shlib-versions and nptl/shlib-versions into sysdeps shlib-versions files, so eliminating another difference between ex-ports and non-ex-ports architectures. * Likewise, for OS-specific content in shlib-versions files. * At that point, the first field in shlib-versions files (the regular expression matching a configuration triplet) should be redundant, so eliminate that field and leave shlib-versions selection working purely on a sysdeps basis (with limited use of %ifdef in shlib-versions files when needed) rather than having its own separate mechanism to select what configuration information is relevant. * Move the build of gnu/lib-names.h to a similar mechanism to that used for gnu/stubs.h (each library build installing a version of the header specifically for that build), so we can eliminate the duplication of soname information in the makefiles and get it purely from shlib-versions files again. There may be other cleanups possible as well (in particular, I'm not sure that all cases where the same "Earliest symbol set" information is repeated for many different libraries actually should need to repeat it rather than specifying it just once for DEFAULT for the given configuration, and separately specifying any non-default choices of soname). Tested x86_64 that the installed shared libraries are unchanged by this patch. * sysdeps/aarch64/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/aarch64/shlib-versions: ... here. * sysdeps/alpha/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/alpha/shlib-versions: ... here. * sysdeps/arm/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/arm/shlib-versions: ... here. * sysdeps/hppa/shlib-versions: Move all contents except for libgcc_s entry to ... * sysdeps/unix/sysv/linux/hppa/shlib-versions: ... here. Merge in entry from ... * sysdeps/hppa/nptl/shlib-versions: ... here. Remove file. * sysdeps/ia64/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/ia64/shlib-versions: ... here. Merge in entry from ... * sysdeps/ia64/nptl/shlib-versions: ... here. Remove file. * sysdeps/m68k/coldfire/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: ... here. * sysdeps/microblaze/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/microblaze/shlib-versions: ... here. * sysdeps/mips/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/mips/shlib-versions: ... here. Merge in entry from ... * sysdeps/mips/nptl/shlib-versions: ... here. Remove file. * sysdeps/tile/shlib-versions: Move to ... * sysdeps/unix/sysv/linux/tile/shlib-versions: ... here. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Merge in entry from ... * sysdeps/x86_64/64/shlib-versions: ... here. Remove file. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Merge in entry from ... * sysdeps/x86_64/x32/shlib-versions: ... here. Remove file.
* Remove second argument from TLS_INIT_TP macroAndreas Schwab2014-05-271-1/+1
|
* Clean up __exit_thread.Roland McGrath2014-05-131-6/+0
|
* Compile with -Wundef.Roland McGrath2014-03-141-0/+1
|
* ia64: relocate out of ports/ subdirMike Frysinger2014-02-168-0/+348
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-02 23:52:22 +0000