| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The implementations of nearbyint functions using x87 floating point
(i386 all versions, x86_64 long double only) use the fclex
instruction, which clears any exceptions that were raised before the
function was called. These functions must not clear exceptions that
were raised before they were called.
This patch fixes these functions to save and restore the whole
floating-point environment (fnstenv / fldenv) as the way of avoiding
raising "inexact" (recall that there isn't an x87 instruction for
loading just the status word, so the whole environment has to be saved
and loaded instead - the code already saved and loaded the control
word, which is now obtained from the saved environment after this
patch, to disable traps on "inexact"). In the case of the long double
functions, any "invalid" exception from frndint (applied to a
signaling NaN) needs merging into the saved state; this issue doesn't
apply to the float and double functions because that exception would
have been raised when the argument is loaded, before the environment
is saved.
[BZ #15491]
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore
floating-point environment instead of clearing all exceptions.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise,
merging in "invalid" exceptions from frndint.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* math/test-nearbyint-except.c: New file.
* math/Makefile (tests): Add test-nearbyint-except.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This mostly automatically-generated patch converts 231 sysdeps
function definitions in glibc from old-style K&R to prototype-style.
For __aio_sigqueue and __gai_sigqueue I had to add internal_function
to the definitions as noted by Florian in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00595.html> to keep
the functions compiling on x86 after conversion to prototype
definitions. Otherwise, the patch is automatically generated with all
the same exclusions and caveats as in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00594.html> except
that it's a patch for sysdeps files.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). Also tested for arm,
mips64 and powerpc32 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/arm/backtrace.c (__backtrace): Convert to
prototype-style function definition.
* sysdeps/i386/backtrace.c (__backtrace): Likewise.
* sysdeps/i386/ffs.c (__ffs): Likewise.
* sysdeps/i386/i686/ffs.c (__ffs): Likewise.
* sysdeps/ia64/nptl/pthread_spin_lock.c (pthread_spin_lock):
Likewise.
* sysdeps/ia64/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l):
Likewise.
* sysdeps/m68k/ffs.c (__ffs): Likewise.
* sysdeps/m68k/m680x0/fpu/e_acos.c (FUNC): Likewise.
* sysdeps/m68k/m680x0/fpu/e_fmod.c (FUNC): Likewise.
* sysdeps/mach/adjtime.c (__adjtime): Likewise.
* sysdeps/mach/gettimeofday.c (__gettimeofday): Likewise.
* sysdeps/mach/hurd/_exit.c (_exit): Likewise.
* sysdeps/mach/hurd/access.c (__access): Likewise.
* sysdeps/mach/hurd/adjtime.c (__adjtime): Likewise.
* sysdeps/mach/hurd/chdir.c (__chdir): Likewise.
* sysdeps/mach/hurd/chmod.c (__chmod): Likewise.
* sysdeps/mach/hurd/chown.c (__chown): Likewise.
* sysdeps/mach/hurd/cthreads.c (cthread_keycreate): Likewise.
(cthread_getspecific): Likewise.
(cthread_setspecific): Likewise.
(__libc_getspecific): Likewise.
* sysdeps/mach/hurd/euidaccess.c (__euidaccess): Likewise.
* sysdeps/mach/hurd/faccessat.c (faccessat): Likewise.
* sysdeps/mach/hurd/fchdir.c (__fchdir): Likewise.
* sysdeps/mach/hurd/fchmod.c (__fchmod): Likewise.
* sysdeps/mach/hurd/fchmodat.c (fchmodat): Likewise.
* sysdeps/mach/hurd/fchown.c (__fchown): Likewise.
* sysdeps/mach/hurd/fchownat.c (fchownat): Likewise.
* sysdeps/mach/hurd/flock.c (__flock): Likewise.
* sysdeps/mach/hurd/fsync.c (fsync): Likewise.
* sysdeps/mach/hurd/ftruncate.c (__ftruncate): Likewise.
* sysdeps/mach/hurd/getgroups.c (__getgroups): Likewise.
* sysdeps/mach/hurd/gethostname.c (__gethostname): Likewise.
* sysdeps/mach/hurd/getitimer.c (__getitimer): Likewise.
* sysdeps/mach/hurd/getlogin_r.c (__getlogin_r): Likewise.
* sysdeps/mach/hurd/getpgid.c (__getpgid): Likewise.
* sysdeps/mach/hurd/getrusage.c (__getrusage): Likewise.
* sysdeps/mach/hurd/getsockname.c (__getsockname): Likewise.
* sysdeps/mach/hurd/group_member.c (__group_member): Likewise.
* sysdeps/mach/hurd/isatty.c (__isatty): Likewise.
* sysdeps/mach/hurd/lchown.c (__lchown): Likewise.
* sysdeps/mach/hurd/link.c (__link): Likewise.
* sysdeps/mach/hurd/linkat.c (linkat): Likewise.
* sysdeps/mach/hurd/listen.c (__listen): Likewise.
* sysdeps/mach/hurd/mkdir.c (__mkdir): Likewise.
* sysdeps/mach/hurd/mkdirat.c (mkdirat): Likewise.
* sysdeps/mach/hurd/openat.c (__openat): Likewise.
* sysdeps/mach/hurd/poll.c (__poll): Likewise.
* sysdeps/mach/hurd/readlink.c (__readlink): Likewise.
* sysdeps/mach/hurd/readlinkat.c (readlinkat): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/rename.c (rename): Likewise.
* sysdeps/mach/hurd/renameat.c (renameat): Likewise.
* sysdeps/mach/hurd/revoke.c (revoke): Likewise.
* sysdeps/mach/hurd/rewinddir.c (__rewinddir): Likewise.
* sysdeps/mach/hurd/rmdir.c (__rmdir): Likewise.
* sysdeps/mach/hurd/seekdir.c (seekdir): Likewise.
* sysdeps/mach/hurd/send.c (__send): Likewise.
* sysdeps/mach/hurd/setdomain.c (setdomainname): Likewise.
* sysdeps/mach/hurd/setegid.c (setegid): Likewise.
* sysdeps/mach/hurd/seteuid.c (seteuid): Likewise.
* sysdeps/mach/hurd/setgid.c (__setgid): Likewise.
* sysdeps/mach/hurd/setgroups.c (setgroups): Likewise.
* sysdeps/mach/hurd/sethostid.c (sethostid): Likewise.
* sysdeps/mach/hurd/sethostname.c (sethostname): Likewise.
* sysdeps/mach/hurd/setlogin.c (setlogin): Likewise.
* sysdeps/mach/hurd/setpgid.c (__setpgid): Likewise.
* sysdeps/mach/hurd/setregid.c (__setregid): Likewise.
* sysdeps/mach/hurd/setreuid.c (__setreuid): Likewise.
* sysdeps/mach/hurd/settimeofday.c (__settimeofday): Likewise.
* sysdeps/mach/hurd/setuid.c (__setuid): Likewise.
* sysdeps/mach/hurd/shutdown.c (shutdown): Likewise.
* sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/hurd/sigpending.c (sigpending): Likewise.
* sysdeps/mach/hurd/sigprocmask.c (__sigprocmask): Likewise.
* sysdeps/mach/hurd/sigsuspend.c (__sigsuspend): Likewise.
* sysdeps/mach/hurd/socket.c (__socket): Likewise.
* sysdeps/mach/hurd/symlink.c (__symlink): Likewise.
* sysdeps/mach/hurd/symlinkat.c (symlinkat): Likewise.
* sysdeps/mach/hurd/telldir.c (telldir): Likewise.
* sysdeps/mach/hurd/truncate.c (__truncate): Likewise.
* sysdeps/mach/hurd/umask.c (__umask): Likewise.
* sysdeps/mach/hurd/unlink.c (__unlink): Likewise.
* sysdeps/mach/hurd/unlinkat.c (unlinkat): Likewise.
* sysdeps/mips/mips64/__longjmp.c (__longjmp): Likewise.
* sysdeps/posix/alarm.c (alarm): Likewise.
* sysdeps/posix/cuserid.c (cuserid): Likewise.
* sysdeps/posix/dirfd.c (dirfd): Likewise.
* sysdeps/posix/dup.c (__dup): Likewise.
* sysdeps/posix/dup2.c (__dup2): Likewise.
* sysdeps/posix/euidaccess.c (euidaccess): Likewise.
(main): Likewise.
* sysdeps/posix/flock.c (__flock): Likewise.
* sysdeps/posix/fpathconf.c (__fpathconf): Likewise.
* sysdeps/posix/getcwd.c (__getcwd): Likewise.
* sysdeps/posix/gethostname.c (__gethostname): Likewise.
* sysdeps/posix/gettimeofday.c (__gettimeofday): Likewise.
* sysdeps/posix/isatty.c (__isatty): Likewise.
* sysdeps/posix/killpg.c (killpg): Likewise.
* sysdeps/posix/libc_fatal.c (__libc_fatal): Likewise.
* sysdeps/posix/mkfifoat.c (mkfifoat): Likewise.
* sysdeps/posix/raise.c (raise): Likewise.
* sysdeps/posix/remove.c (remove): Likewise.
* sysdeps/posix/rename.c (rename): Likewise.
* sysdeps/posix/rewinddir.c (__rewinddir): Likewise.
* sysdeps/posix/seekdir.c (seekdir): Likewise.
* sysdeps/posix/sigblock.c (__sigblock): Likewise.
* sysdeps/posix/sigignore.c (sigignore): Likewise.
* sysdeps/posix/sigintr.c (siginterrupt): Likewise.
* sysdeps/posix/signal.c (__bsd_signal): Likewise.
* sysdeps/posix/sigset.c (sigset): Likewise.
* sysdeps/posix/sigsuspend.c (__sigsuspend): Likewise.
* sysdeps/posix/sysconf.c (__sysconf): Likewise.
* sysdeps/posix/sysv_signal.c (__sysv_signal): Likewise.
* sysdeps/posix/time.c (time): Likewise.
* sysdeps/posix/ttyname.c (getttyname): Likewise.
(ttyname): Likewise.
* sysdeps/posix/ttyname_r.c (__ttyname_r): Likewise.
* sysdeps/posix/utime.c (utime): Likewise.
* sysdeps/powerpc/fpu/s_isnan.c (__isnan): Likewise.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Likewise.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c
(pthread_spin_trylock): Likewise.
* sysdeps/pthread/aio_error.c (aio_error): Likewise.
* sysdeps/pthread/aio_read.c (aio_read): Likewise.
* sysdeps/pthread/aio_read64.c (aio_read64): Likewise.
* sysdeps/pthread/aio_write.c (aio_write): Likewise.
* sysdeps/pthread/aio_write64.c (aio_write64): Likewise.
* sysdeps/pthread/flockfile.c (__flockfile): Likewise.
* sysdeps/pthread/ftrylockfile.c (__ftrylockfile): Likewise.
* sysdeps/pthread/funlockfile.c (__funlockfile): Likewise.
* sysdeps/pthread/timer_create.c (timer_create): Likewise.
* sysdeps/pthread/timer_getoverr.c (timer_getoverrun): Likewise.
* sysdeps/pthread/timer_gettime.c (timer_gettime): Likewise.
* sysdeps/s390/ffs.c (__ffs): Likewise.
* sysdeps/s390/nptl/pthread_spin_lock.c (pthread_spin_lock):
Likewise.
* sysdeps/s390/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdeps/sh/nptl/pthread_spin_lock.c (pthread_spin_lock):
Likewise.
* sysdeps/sparc/nptl/pthread_barrier_destroy.c
(pthread_barrier_destroy): Likewise.
* sysdeps/sparc/nptl/pthread_barrier_wait.c
(__pthread_barrier_wait): Likewise.
* sysdeps/sparc/sparc32/e_sqrt.c (__ieee754_sqrt): Likewise.
* sysdeps/sparc/sparc32/pthread_barrier_wait.c
(__pthread_barrier_wait): Likewise.
* sysdeps/sparc/sparc32/sem_init.c (__old_sem_init): Likewise.
* sysdeps/tile/memcmp.c (memcmp_common_alignment): Likewise.
(memcmp_not_common_alignment): Likewise.
(MEMCMP): Likewise.
* sysdeps/tile/wordcopy.c (_wordcopy_fwd_aligned): Likewise.
(_wordcopy_fwd_dest_aligned): Likewise.
(_wordcopy_bwd_aligned): Likewise.
(_wordcopy_bwd_dest_aligned): Likewise.
* sysdeps/unix/bsd/ftime.c (ftime): Likewise.
* sysdeps/unix/bsd/gtty.c (gtty): Likewise.
* sysdeps/unix/bsd/stty.c (stty): Likewise.
* sysdeps/unix/bsd/tcflow.c (tcflow): Likewise.
* sysdeps/unix/bsd/tcflush.c (tcflush): Likewise.
* sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Likewise.
* sysdeps/unix/bsd/tcgetpgrp.c (tcgetpgrp): Likewise.
* sysdeps/unix/bsd/tcsendbrk.c (tcsendbreak): Likewise.
* sysdeps/unix/bsd/tcsetattr.c (tcsetattr): Likewise.
* sysdeps/unix/bsd/tcsetpgrp.c (tcsetpgrp): Likewise.
* sysdeps/unix/bsd/ualarm.c (ualarm): Likewise.
* sysdeps/unix/bsd/wait3.c (__wait3): Likewise.
* sysdeps/unix/getlogin_r.c (__getlogin_r): Likewise.
* sysdeps/unix/sockatmark.c (sockatmark): Likewise.
* sysdeps/unix/stime.c (stime): Likewise.
* sysdeps/unix/sysv/linux/_exit.c (_exit): Likewise.
* sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue):
Likewise. Use internal_function.
* sysdeps/unix/sysv/linux/arm/sigaction.c (__libc_sigaction):
Convert to prototype-style function definition.
* sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise.
* sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise.
* sysdeps/unix/sysv/linux/fpathconf.c (__fpathconf): Likewise.
* sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue):
Likewise. Use internal_function.
* sysdeps/unix/sysv/linux/gethostid.c (sethostid): Convert to
prototype-style function definition
* sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid):
Likewise.
(__getlogin_r): Likewise.
* sysdeps/unix/sysv/linux/getpt.c (__posix_openpt): Likewise.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_broadcast.c
(__pthread_cond_broadcast): Likewise.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_destroy.c
(__pthread_cond_destroy): Likewise.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_init.c
(__pthread_cond_init): Likewise.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_signal.c
(__pthread_cond_signal): Likewise.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_wait): Likewise.
* sysdeps/unix/sysv/linux/i386/getmsg.c (getmsg): Likewise.
* sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise.
* sysdeps/unix/sysv/linux/ia64/sigaction.c (__libc_sigaction):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sigpending.c (sigpending):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sigprocmask.c (__sigprocmask):
Likewise.
* sysdeps/unix/sysv/linux/mips/sigaction.c (__libc_sigaction):
Likewise.
* sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c
(__ftruncate64): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c
(truncate64): Likewise.
* sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise.
* sysdeps/unix/sysv/linux/pthread_getcpuclockid.c
(pthread_getcpuclockid): Likewise.
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np):
Likewise.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np):
Likewise.
* sysdeps/unix/sysv/linux/pthread_sigmask.c (pthread_sigmask):
Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/raise.c (raise): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c
(__libc_sigaction): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c (sigpending):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c
(__sigprocmask): Likewise.
* sysdeps/unix/sysv/linux/semget.c (semget): Likewise.
* sysdeps/unix/sysv/linux/semop.c (semop): Likewise.
* sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise.
* sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise.
* sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise.
* sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise.
* sysdeps/unix/sysv/linux/sigaction.c (__libc_sigaction):
Likewise.
* sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise.
* sysdeps/unix/sysv/linux/sigprocmask.c (__sigprocmask): Likewise.
* sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise.
* sysdeps/unix/sysv/linux/sigstack.c (sigstack): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c (sigpending):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c
(__sigprocmask): Likewise.
* sysdeps/unix/sysv/linux/speed.c (cfgetospeed): Likewise.
(cfgetispeed): Likewise.
(cfsetospeed): Likewise.
(cfsetispeed): Likewise.
* sysdeps/unix/sysv/linux/tcflow.c (tcflow): Likewise.
* sysdeps/unix/sysv/linux/tcflush.c (tcflush): Likewise.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise.
* sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise.
* sysdeps/unix/sysv/linux/time.c (time): Likewise.
* sysdeps/unix/sysv/linux/timer_create.c (timer_create): Likewise.
* sysdeps/unix/sysv/linux/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun):
Likewise.
* sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigpending.c (sigpending):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigprocmask.c (__sigprocmask):
Likewise.
* sysdeps/x86_64/backtrace.c (__backtrace): Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Since x86 _dl_unmap and _dl_make_tlsdesc_dynamic are only used
internally in ld.so, they can be made hidden.
[BZ #19122]
* sysdeps/i386/dl-lookupcfg.h (_dl_unmap): Add attribute_hidden.
* sysdeps/i386/dl-tlsdesc.h (_dl_make_tlsdesc_dynamic):
Likewise.
* sysdeps/x86_64/dl-tlsdesc.h (_dl_make_tlsdesc_dynamic):
Likewise.
* sysdeps/x86_64/dl-lookupcfg.h (_dl_unmap): Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a configure test for assembler support for -mtune=i686. This
option was added in binutils 2.18 so the test is obsolete; this patch
removes it.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/i386/configure.ac (libc_cv_as_i686): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/Makefile [$(config-asflags-i686) = yes]: Make
code unconditional.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GCC added support for -mno-vzeroupper in version 4.6. Thus the
configure tests for this support are obsolete, and this patch removes
them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_novzeroupper): Remove
configure test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (libc_cv_cc_novzeroupper): Remove
configure test.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/Makefile [$(config-cflags-novzeroupper) = yes]:
Make code unconditional.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GCC added support for -mfma4 in version 4.5. Thus the configure tests
for this support are obsolete, and this patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_fma4): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (libc_cv_cc_fma4): Remove configure
test.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/fpu/multiarch/Makefile [$(have-mfma4) = yes]:
Make code unconditional.
* sysdeps/x86_64/fpu/multiarch/e_asin.c [HAVE_FMA4_SUPPORT]:
Likewise.
* sysdeps/x86_64/fpu/multiarch/e_atan2.c [HAVE_FMA4_SUPPORT]:
Likewise.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/e_exp.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/e_log.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
* sysdeps/x86_64/fpu/multiarch/s_atan.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/s_fma.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/s_fmaf.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/s_sin.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* sysdeps/x86_64/fpu/multiarch/s_tan.c [HAVE_FMA4_SUPPORT]: Make
code unconditional.
[!HAVE_FMA4_SUPPORT]: Remove conditional code.
* config.h.in (HAVE_FMA4_SUPPORT): Remove #undef.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GCC added support for -mavx and -msse2avx in version 4.4. Thus the
configure tests for this support are obsolete, and this patch removes
them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_avx): Remove configure
test.
(libc_cv_cc_sse2avx): Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/multiarch/Makefile
[$(subdir)$(config-cflags-avx) = mathyes]: Change conditional to
[$(subdir) = math].
* sysdeps/i386/i686/multiarch/s_fma-fma.c [HAVE_AVX_SUPPORT]: Make
code unconditional.
* sysdeps/i386/i686/multiarch/s_fma.c [HAVE_AVX_SUPPORT]:
Likewise.
* sysdeps/i386/i686/multiarch/s_fmaf-fma.c [HAVE_AVX_SUPPORT]:
Likewise.
* sysdeps/i386/i686/multiarch/s_fmaf.c [HAVE_AVX_SUPPORT]:
Likewise.
* sysdeps/x86_64/configure.ac (libc_cv_cc_avx): Remove configure
test.
(libc_cv_cc_sse2avx): Likewise.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/Makefile [$(config-cflags-avx) = yes]: Make code
unconditional.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_profile)
[HAVE_AVX_SUPPORT || HAVE_AVX512_ASM_SUPPORT]: Make code
unconditional.
(_dl_runtime_profile)
[!(HAVE_AVX_SUPPORT || HAVE_AVX512_ASM_SUPPORT)]: Remove
conditional code.
* sysdeps/x86_64/fpu/multiarch/Makefile
[$(config-cflags-sse2avx) = yes]: Make code unconditional.
* sysdeps/x86_64/fpu/multiarch/e_atan2.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_atan.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_fma.c [HAVE_AVX_SUPPORT]:
Likewise.
* sysdeps/x86_64/fpu/multiarch/s_fmaf.c [HAVE_AVX_SUPPORT]:
Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sin.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
* sysdeps/x86_64/multiarch/strcmp.S [HAVE_AVX_SUPPORT]: Likewise.
* config.h.in (HAVE_AVX_SUPPORT): Remove #undef.
(HAVE_SSE2AVX_SUPPORT): Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GCC added support for -msse4 in version 4.3. Thus the configure tests
for it are obsolete, and this patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_sse4): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/multiarch/Makefile
[$(config-cflags-sse4) = yes]: Make code unconditional.
* sysdeps/i386/i686/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/i386/i686/multiarch/strspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/x86_64/configure.ac (libc_cv_cc_sse4): Remove configure
test.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/multiarch/Makefile [$(config-cflags-sse4) = yes]:
Make code unconditional.
* sysdeps/x86_64/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/x86_64/multiarch/strspn.S [HAVE_SSE4_SUPPORT]: Likewise.
* config.h.in (HAVE_SSE4_SUPPORT): Remove #undef.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ISO C requires overflowing results from nexttoward to be the
appropriate infinity independent of the rounding mode, but some
implementations use a rounding-mode-dependent result (this is the same
issue as was fixed for nextafter in bug 16677). This patch fixes the
problem by making the nexttoward implementations discard the result
from the floating-point computation that forced an overflow exception
and then return the infinity previously computed with integer
arithmetic.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #19059]
* math/s_nexttowardf.c (__nexttowardf): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
* math/libm-test.inc (nexttoward_test_data): Add more tests.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The i386 versions of acoshf and acosh raise a spurious "invalid"
exception for an argument that is a quiet NaN with the sign bit set.
The integer arithmetic to detect arguments < 1 also detects -NaN, and
then the computation 0 / 0 in that case raises the exception. This
patch fixes this by using (x - x) / (x - x) as the computation in that
case instead, which will always raise the exception for non-NaN
arguments reaching that code, but not for quiet NaN arguments.
Tested for x86_64 and x86.
[BZ #19032]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1,
compute result as (x - x) / (x - x) not as 0 / 0.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* math/libm-test.inc (acosh_test_data): Add another test of acosh.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.
However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm. This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs. This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.
Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear. Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.
[BZ #19016]
* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
allow more cases with X^2 + Y^2 >= 0.5.
* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as
normal element in sum instead of special-casing based on values of
arguments.
* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add
-1 as normal element in sum instead of special-casing based on
values of arguments.
* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
(__x2y2m1): Update comment.
* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1
as normal element in sum instead of special-casing based on values
of arguments.
* math/s_clog.c (__clog): Handle more cases using log1p without
hypot.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/auto-libm-test-in: Add more tests of clog and clog10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero. This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18825]
* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
New macro.
(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
DBL_NARROW_EVAL, reloading the PIC register as needed.
* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
FLT_NARROW_EVAL. Use separate return path for case when first
argument is NaN.
* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
PIC register.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
math_check_force_underflow_nonneg.
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
underflow for subnormal result.
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
math_check_force_underflow_nonneg.
* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
math_check_force_underflow.
* sysdeps/x86_64/fpu/x86_64-math-asm.h
(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero. This patch forces the exception in a similar way to
previous fixes.
Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits). Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18803]
* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
(MO): New macro.
(__ieee754_hypot) [PIC]: Load PIC register.
(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
DBL_NARROW_EVAL.
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
math_check_force_underflow_nonneg in case where result might be
tiny.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
* math/auto-libm-test-in: Add more tests of hypot.
* math/auto-libm-test-out: Regenerated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
sysdeps/i386/fpu/e_atanh.S, unlike all other functions in that
directory, loads the PIC register with its own code using
_GLOBAL_OFFSET_TABLE_, rather than with the LOAD_PIC_REG macro. I see
no good reason for the difference; this patch makes it use the common
macro.
Tested for x86.
* sysdeps/i386/fpu/e_atanh.S (__ieee754_atanh) [PIC]: Use
LOAD_PIC_REG.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch refactors code in sysdeps/i386/fpu that forces underflow
exceptions to use common macros for that purpose as far as possible.
(Although some of the macros end up used in only one place, I think
it's cleanest to define all these macros together so that all the code
forcing underflow uses such macros. Some more uses of such macros
will also be introduced when fixing remaining bugs about missing
underflow exceptions, and it would be possible to do further
refactoring of the macros in i386-math-asm.h to share more code by
using other macros internally. Places that test for underflow by
examining the representation of the argument with integer operations,
rather that using floating-point comparisons on the argument or
result, are unchanged by this patch.)
Most of this code uses a macro MO to abstract away the differences
between PIC and non-PIC memory references to constants. log1p
functions, however, hardcoded PIC conditionals for this. Because the
common macros rely on the use of MO, I changed the log1p functions to
use the normal style here, and, for consistency, also made that change
to log1pl which is otherwise unaffected by this patch.
Tested for x86.
* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_LDBL_MIN): New macro.
(FLT_CHECK_FORCE_UFLOW): Likewise.
(DBL_CHECK_FORCE_UFLOW): Likewise.
(FLT_CHECK_FORCE_UFLOW_NARROW): Likewise.
(DBL_CHECK_FORCE_UFLOW_NARROW): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNEG_NAN): Likewise.
(FLT_CHECK_FORCE_UFLOW_NONNAN): Likewise.
(DBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
(FLT_CHECK_FORCE_UFLOW_NONNEG): Likewise.
(DBL_CHECK_FORCE_UFLOW_NONNEG): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNEG): Likewise.
* sysdeps/i386/fpu/e_asin.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_asin): Use DBL_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/e_asinf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_asinf): Use FLT_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/e_atan2.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_atan2): Use DBL_CHECK_FORCE_UFLOW_NARROW.
* sysdeps/i386/fpu/e_atan2f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_atan2f): Use FLT_CHECK_FORCE_UFLOW_NARROW.
* sysdeps/i386/fpu/e_atanh.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_atanh): Use DBL_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_atanhf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_atanhf): Use FLT_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_exp2l.S: Include <i386-math-asm.h>.
(ldbl_min): Replace with use of DEFINE_LDBL_MIN.
(__ieee754_exp2l): Use LDBL_CHECK_FORCE_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_expl.S: Include <i386-math-asm.h>.
[!USE_AS_EXPM1L] (cmin): Replace with use of DEFINE_LDBL_MIN.
(IEEE754_EXPL): Use LDBL_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/s_atan.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__atan): Use DBL_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/s_atanf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__atanf): Use FLT_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/s_expm1.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__expm1): Use DBL_CHECK_FORCE_UFLOW. Move underflow check after
main computation.
* sysdeps/i386/fpu/s_expm1f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__expm1f): Use FLT_CHECK_FORCE_UFLOW. Move underflow check after
main computation.
* sysdeps/i386/fpu/s_log1p.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(MO): New macro.
(__log1p): Use MO. Use DBL_CHECK_FORCE_UFLOW_NONNAN.
* sysdeps/i386/fpu/s_log1pf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(MO): New macro.
(__log1pf): Use MO. Use FLT_CHECK_FORCE_UFLOW_NONNAN.
* sysdeps/i386/fpu/s_log1pl.S (MO): New macro.
(__log1pl): Use MO.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Where glibc code needs to avoid excess range and precision in
floating-point arithmetic, code variously uses either asms or volatile
to force the results of that arithmetic to memory; mostly this is
conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint
functions some use of volatile is unconditional (and is present
unnecessarily in versions for long double). This patch make such code
use the recently-added math_narrow_eval macro consistently, removing
the unnecessary uses of volatile in long double lrint / llrint
implementations completely.
Tested for x86_64, x86, mips64 and powerpc.
* math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval.
* stdlib/strtod_l.c: Include <math_private.h>.
(overflow_value): Use math_narrow_eval.
(underflow_value): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
(__ieee754_gamma_r): Likewise.
* sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf):
Likewise.
* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
Likewise.
* sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise.
* sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise.
* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
(__ieee754_gammaf_r): Likewise.
* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise.
* sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise.
* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product):
Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
i386 exp, hypot and pow functions can return overflowing and
underflowing values with excess range and precision; ; Wilco
Dijkstra's patches to make isfinite etc. expand inline cause this
pre-existing issue to result in test failures.
This patch fixes those functions to avoid excess range and precision
in their return values. Appropriate macros are added for the repeated
code sequences; in future I'll add more such macros and refactor
existing code forcing underflow (with or without also eliminating
excess range and precision from the return value) to use such macros.
Tested for x86. If, after this patch, you still see x86 libm test
failures with excess range or precision, please file bugs in Bugzilla.
[BZ #18980]
* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_FLT_MIN): New macro.
(DEFINE_DBL_MIN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG): Likewise.
* sysdeps/i386/fpu/e_exp.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__exp_finite): Use DBL_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_exp10.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp10): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp10f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp10f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp2): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp2f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_expf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_expf): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__expf_finite): Use FLT_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_hypot.S: Include <i386-math-asm.h>.
(__ieee754_hypot): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_hypotf.S: Include <i386-math-asm.h>.
(__ieee754_hypotf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/e_pow.S: Include <i386-math-asm.h>.
(__ieee754_pow): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_powf.S: Include <i386-math-asm.h>.
(__ieee754_powf): Use FLT_NARROW_EVAL.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S
(__ieee754_expf_sse2): Convert double-precision result to single
precision.
* sysdeps/i386/fpu/libm-test-ulps: Update.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
i386 scalb / scalbn / scalbln (and thus ldexp) functions for float and
double can return results with excess range (and consequently excess
precision for subnormal results). As the results of these functions
are fully determined by reference to IEEE 754 operations, this is
unambiguously a bug, apart from the testsuite failures it causes.
This patch makes those functions store their results on the stack and
load them back to eliminate the excess range. Double rounding is not
a problem, as the only cases where it could occur are when the result
overflows or underflows for extended precision, and then the
double-rounded results are the same as the single-rounded results.
The new macros will be used for more functions, more such macros
added, and existing code refactored to use such macros, in subsequent
patches.
Tested for x86. Committed.
[BZ #18981]
* sysdeps/i386/fpu/i386-math-asm.h: New file.
* sysdeps/i386/fpu/e_scalb.S: Include <i386-math-asm.h>.
(__ieee754_scalb): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_scalbf.S: Include <i386-math-asm.h>.
(__ieee754_scalbf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbn.S: Include <i386-math-asm.h>.
(__scalbn): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbnf.S: Include <i386-math-asm.h>.
(__scalbnf): Use FLT_NARROW_EVAL.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow. This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).
Notes:
* Where compat symbols were defined for scalbn functions, I didn't
change what they point to (to keep the patch minimal), so such
compat symbols continue to go directly to the non-errno-setting
functions.
* Mike, I didn't do anything with the IA64 versions of these
functions, where I think both the ldexp and scalbn functions already
deal with setting errno. As a cleanup (not needed to fix this bug)
however you might want to make those functions into aliases for
IA64; there is no need for them to be separate function
implementations at all.
* This concludes the fix for bug 6803 since the scalb and scalbln
cases of that bug were fixed some time ago.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6803]
* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
long_double_symbol calls.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
strong alias of __ldexpl.
(scalbnl): Define using long_double_symbol.
* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
Remove alias.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add errno expectations.
(scalbln_test_data): Add more errno expectations.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On i386, the double version of exp10 can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 and exp fixes, the exp10f changes may in fact not be
needed to ensure underflow exceptions, but are included for
consistency and to fix the exp10 part of bug 18875 by ensuring that
excess range and precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18966]
* sysdeps/i386/fpu/e_exp10.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp10): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp10f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp10f): For small results, force underflow exception
and remove excess range and precision from return value.
* math/auto-libm-test-in: Add more tests of exp10.
* math/auto-libm-test-out: Regenerated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On i386, the double version of exp can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 fixes, the expf changes may in fact not be needed to
ensure underflow exceptions, but are included for consistency and to
fix the exp part of bug 18875 by ensuring that excess range and
precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18961]
* sysdeps/i386/fpu/e_exp.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp): For small results, force underflow exception and
remove excess range and precision from return value.
(__exp_finite): Likewise.
* sysdeps/i386/fpu/e_expf.S (flt_min): New object.
(MO): New macro.
(__ieee754_expf): For small results, force underflow exception and
remove excess range and precision from return value.
(__expf_finite): Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Various exp2 implementations in glibc can miss underflow exceptions
when the scaling down part of the calculation is exact (or, in the x86
case, when the conversion from extended precision to the target
precision is exact). This patch forces the exception in a similar way
to previous fixes.
The x86 exp2f changes may in fact not be needed for this purpose -
it's likely to be the case that no argument of type float has an exp2
result so close to an exact subnormal float value that it equals that
value when rounded to 64 bits (even taking account of variation
between different x86 implementations). However, they are included
for consistency with the changes to exp2 and so as to fix the exp2f
part of bug 18875 by ensuring that excess range and precision is
removed from underflowing return values.
Tested for x86_64, x86 and mips64.
[BZ #16521]
[BZ #18875]
* math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for
small results.
* sysdeps/i386/fpu/e_exp2.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp2): For small results, force underflow exception and
remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp2f): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* math/auto-libm-test-in: Add more tests or exp2.
* math/auto-libm-test-out: Regenerated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds more libm test inputs found through random test
generation to increase previously known ulps. This particular test
generation was run for mips64, so most of the increased ulps are for
ldbl-128 (float and double having been fairly well covered by such
testing for x86_64), but there's the odd ulps increase for other
formats.
Tested for x86_64, x86 and mips64.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp,
exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and
tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds more libm test inputs found through random test
generation to increase observed ulps on x86_64.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acosh, atanh, cbrt,
cosh, csqrt, erfc, expm1 and lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments. This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).
This patch fixes this inaccuracy. For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant. Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.
Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values. The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy. The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.
In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x). Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations. Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).
Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range. Outside that range,
the previous implementation continues to be used.
Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.
[BZ #2542]
[BZ #2543]
[BZ #2558]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
__lgamma_neg for arguments from -28.0 to -2.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
__lgamma_negf for arguments from -15.0 to -2.0.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -33.0 to -2.0.
* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
(__lgamma_neg): Likewise.
(__lgamma_negl): Likewise.
(__lgamma_product): Likewise.
(__lgamma_productl): Likewise.
* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/libc-lock.h to plain libc-lock.h and
bits/libc-lockP.h to plain libc-lockP.h to follow that convention.
Note that I don't know where libc-lockP.h comes from for Hurd (the
Hurd libc-lock.h includes libc-lockP.h, but the only libc-lockP.h in
the glibc source tree is for NPTL) - some unmerged patch? - but I
updated the #include in the Hurd libc-lock.h anyway.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/libc-lock.h: Move to ...
* sysdeps/generic/libc-lock.h: ...here.
(_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H.
* sysdeps/mach/hurd/bits/libc-lock.h: Move to ...
* sysdeps/mach/hurd/libc-lock.h: ...here.
(_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H.
[_LIBC]: Include <libc-lockP.h> instead of <bits/libc-lockP.h>.
* sysdeps/mach/bits/libc-lock.h: Move to ...
* sysdeps/mach/libc-lock.h: ...here.
(_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H.
* sysdeps/nptl/bits/libc-lock.h: Move to ...
* sysdeps/nptl/libc-lock.h: ...here.
(_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H.
* sysdeps/nptl/bits/libc-lockP.h: Move to ...
* sysdeps/nptl/libc-lockP.h: ...here.
(_BITS_LIBC_LOCKP_H): Rename macro to _LIBC_LOCKP_H.
* crypt/crypt_util.c: Include <libc-lock.h> instead of
<bits/libc-lock.h>.
* dirent/scandir-tail.c: Likewise.
* dlfcn/dlerror.c: Likewise.
* elf/dl-close.c: Likewise.
* elf/dl-iteratephdr.c: Likewise.
* elf/dl-lookup.c: Likewise.
* elf/dl-open.c: Likewise.
* elf/dl-support.c: Likewise.
* elf/dl-writev.h: Likewise.
* elf/rtld.c: Likewise.
* grp/fgetgrent.c: Likewise.
* gshadow/fgetsgent.c: Likewise.
* gshadow/sgetsgent.c: Likewise.
* iconv/gconv_conf.c: Likewise.
* iconv/gconv_db.c: Likewise.
* iconv/gconv_dl.c: Likewise.
* iconv/gconv_int.h: Likewise.
* iconv/gconv_trans.c: Likewise.
* include/link.h: Likewise.
* inet/getnameinfo.c: Likewise.
* inet/getnetgrent.c: Likewise.
* inet/getnetgrent_r.c: Likewise.
* intl/bindtextdom.c: Likewise.
* intl/dcigettext.c: Likewise.
* intl/finddomain.c: Likewise.
* intl/gettextP.h: Likewise.
* intl/loadmsgcat.c: Likewise.
* intl/localealias.c: Likewise.
* intl/textdomain.c: Likewise.
* libidn/idn-stub.c: Likewise.
* libio/libioP.h: Likewise.
* locale/duplocale.c: Likewise.
* locale/freelocale.c: Likewise.
* locale/newlocale.c: Likewise.
* locale/setlocale.c: Likewise.
* login/getutent_r.c: Likewise.
* login/getutid_r.c: Likewise.
* login/getutline_r.c: Likewise.
* login/utmp-private.h: Likewise.
* login/utmpname.c: Likewise.
* malloc/mtrace.c: Likewise.
* misc/efgcvt.c: Likewise.
* misc/error.c: Likewise.
* misc/fstab.c: Likewise.
* misc/getpass.c: Likewise.
* misc/mntent.c: Likewise.
* misc/syslog.c: Likewise.
* nis/nis_call.c: Likewise.
* nis/nis_callback.c: Likewise.
* nis/nss-default.c: Likewise.
* nis/nss_compat/compat-grp.c: Likewise.
* nis/nss_compat/compat-initgroups.c: Likewise.
* nis/nss_compat/compat-pwd.c: Likewise.
* nis/nss_compat/compat-spwd.c: Likewise.
* nis/nss_nis/nis-alias.c: Likewise.
* nis/nss_nis/nis-ethers.c: Likewise.
* nis/nss_nis/nis-grp.c: Likewise.
* nis/nss_nis/nis-hosts.c: Likewise.
* nis/nss_nis/nis-network.c: Likewise.
* nis/nss_nis/nis-proto.c: Likewise.
* nis/nss_nis/nis-pwd.c: Likewise.
* nis/nss_nis/nis-rpc.c: Likewise.
* nis/nss_nis/nis-service.c: Likewise.
* nis/nss_nis/nis-spwd.c: Likewise.
* nis/nss_nisplus/nisplus-alias.c: Likewise.
* nis/nss_nisplus/nisplus-ethers.c: Likewise.
* nis/nss_nisplus/nisplus-grp.c: Likewise.
* nis/nss_nisplus/nisplus-hosts.c: Likewise.
* nis/nss_nisplus/nisplus-initgroups.c: Likewise.
* nis/nss_nisplus/nisplus-network.c: Likewise.
* nis/nss_nisplus/nisplus-proto.c: Likewise.
* nis/nss_nisplus/nisplus-pwd.c: Likewise.
* nis/nss_nisplus/nisplus-rpc.c: Likewise.
* nis/nss_nisplus/nisplus-service.c: Likewise.
* nis/nss_nisplus/nisplus-spwd.c: Likewise.
* nis/ypclnt.c: Likewise.
* nptl/libc_pthread_init.c: Likewise.
* nss/getXXbyYY.c: Likewise.
* nss/getXXent.c: Likewise.
* nss/getXXent_r.c: Likewise.
* nss/nss_db/db-XXX.c: Likewise.
* nss/nss_db/db-netgrp.c: Likewise.
* nss/nss_db/nss_db.h: Likewise.
* nss/nss_files/files-XXX.c: Likewise.
* nss/nss_files/files-alias.c: Likewise.
* nss/nsswitch.c: Likewise.
* posix/regex_internal.h: Likewise.
* posix/wordexp.c: Likewise.
* pwd/fgetpwent.c: Likewise.
* resolv/res_hconf.c: Likewise.
* resolv/res_libc.c: Likewise.
* shadow/fgetspent.c: Likewise.
* shadow/lckpwdf.c: Likewise.
* shadow/sgetspent.c: Likewise.
* socket/opensock.c: Likewise.
* stdio-common/reg-modifier.c: Likewise.
* stdio-common/reg-printf.c: Likewise.
* stdio-common/reg-type.c: Likewise.
* stdio-common/vfprintf.c: Likewise.
* stdio-common/vfscanf.c: Likewise.
* stdlib/abort.c: Likewise.
* stdlib/cxa_atexit.c: Likewise.
* stdlib/fmtmsg.c: Likewise.
* stdlib/random.c: Likewise.
* stdlib/setenv.c: Likewise.
* string/strsignal.c: Likewise.
* sunrpc/auth_none.c: Likewise.
* sunrpc/bindrsvprt.c: Likewise.
* sunrpc/create_xid.c: Likewise.
* sunrpc/key_call.c: Likewise.
* sunrpc/rpc_thread.c: Likewise.
* sysdeps/arm/backtrace.c: Likewise.
* sysdeps/generic/ldsodefs.h: Likewise.
* sysdeps/generic/stdio-lock.h: Likewise.
* sysdeps/generic/unwind-dw2-fde.c: Likewise.
* sysdeps/i386/backtrace.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Likewise.
* sysdeps/m68k/backtrace.c: Likewise.
* sysdeps/mach/hurd/cthreads.c: Likewise.
* sysdeps/mach/hurd/dirstream.h: Likewise.
* sysdeps/mach/hurd/malloc-machine.h: Likewise.
* sysdeps/nptl/malloc-machine.h: Likewise.
* sysdeps/nptl/stdio-lock.h: Likewise.
* sysdeps/posix/dirstream.h: Likewise.
* sysdeps/posix/getaddrinfo.c: Likewise.
* sysdeps/posix/system.c: Likewise.
* sysdeps/pthread/aio_suspend.c: Likewise.
* sysdeps/s390/s390-32/backtrace.c: Likewise.
* sysdeps/s390/s390-64/backtrace.c: Likewise.
* sysdeps/unix/sysv/linux/check_pf.c: Likewise.
* sysdeps/unix/sysv/linux/if_index.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getutent_r.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getutid_r.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getutline_r.c: Likewise.
* sysdeps/unix/sysv/linux/shm-directory.c: Likewise.
* sysdeps/unix/sysv/linux/system.c: Likewise.
* sysdeps/x86_64/backtrace.c: Likewise.
* time/alt_digit.c: Likewise.
* time/era.c: Likewise.
* time/tzset.c: Likewise.
* wcsmbs/wcsmbsload.c: Likewise.
* nptl/tst-initializers1.c (do_test): Refer to <libc-lock.h>
instead of <bits/libc-lock.h> in comment.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We detect i586 and i686 features at run-time by checking CX8 and CMOV
CPUID features bits. We can use these information to select the best
implementation in ix86 multiarch. HAS_I586/HAS_I686 is true if i586/i686
instructions are available on the processor.
Due to the reordering and the other nifty extensions in i686, it is not
really good to use heavily i586 optimized code on an i686. It's better
to use i486 code if it isn't an i586. USE_I586/USE_I686 is true if
i586/i686 implementation should be used for the processor. USE_I586
is true only if i686 instructions aren't available. If i686 instructions
are available, we always choose i686 or i486 implementation, in that order,
and we never choose i586 implementation for i686-class processors.
* sysdeps/i386/init-arch.h: New file.
* sysdeps/i386/i586/init-arch.h: Likewise.
* sysdeps/i386/i686/init-arch.h: Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Set bit_I586
bit if CX8 is available. Set bit_I686 bit if CMOV is available.
* sysdeps/x86/cpu-features.h (bit_I586): New.
(bit_I686): Likewise.
(bit_CX8): Likewise.
(bit_CMOV): Likewise.
(index_CX8): Likewise.
(index_CMOV): Likewise.
(index_I586): Likewise.
(index_I686): Likewise.
(reg_CX8): Likewise.
(reg_CMOV): Likewise.
(HAS_I586): Defined as HAS_ARCH_FEATURE (I586) if i586 isn't
available at compile-time.
(HAS_I686): Defined as HAS_ARCH_FEATURE (I686) if i686 isn't
available at compile-time.
* sysdeps/x86/init-arch.h (USE_I586): New macro.
(USE_I686): Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i386 memset and memcpy assembly functions with REP MOVSB/STOSB
instructions.
* sysdeps/i386/bcopy.S: New file.
* sysdeps/i386/bzero.S: Likewise.
* sysdeps/i386/memcpy.S: Likewise.
* sysdeps/i386/memmove.S: Likewise.
* sysdeps/i386/mempcpy.S: Likewise.
* sysdeps/i386/memset.S: Likewise.
* sysdeps/i386/bzero.c: Removed.
* sysdeps/i386/memset.c: Likewise.
* sysdeps/i386/i586/memcpy_chk.S: Likewise.
* sysdeps/i386/i586/mempcpy_chk.S: Likewise.
* sysdeps/i386/i586/memset_chk.S: Likewise.
* sysdeps/i386/i686/memcpy_chk.S: Moved to ...
* sysdeps/i386/memcpy_chk.S: Here.
* sysdeps/i386/i686/memmove_chk.S: Moved to ...
* sysdeps/i386/memmove_chk.S: Here.
* sysdeps/i386/i686/mempcpy_chk.S: Moved to ...
* sysdeps/i386/mempcpy_chk.S: Likewise.
* sysdeps/i386/i686/memset_chk.S: Moved to ...
* sysdeps/i386/memset_chk.S: Likewise.
|
| |
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can remove i486 subdirectory.
* sysdeps/i386/i586/Implies: Removed.
* sysdeps/i386/i686/Implies: Likewise.
|
| |
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move i486/strlen.S
to strlen.S.
* sysdeps/i386/i486/strlen.S: Moved to ...
* sysdeps/i386/strlen.S: Here.
|
| |
|
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move i486/strcat.S
to strcat.S.
* sysdeps/i386/i486/strcat.S: Moved to ...
* sysdeps/i386/strcat.S: Here.
* sysdeps/i386/i686/multiarch/strcat.S: Updated.
|
| |
|
|
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move
i486/pthread_spin_trylock.S to pthread_spin_trylock.S
* sysdeps/i386/i486/pthread_spin_trylock.S: Moved to ...
* sysdeps/i386/pthread_spin_trylock.S: Here.
* sysdeps/i386/i586/pthread_spin_trylock.S: Removed.
* sysdeps/i386/i686/pthread_spin_trylock.S: Updated.
|
| |
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move
i486/string-inlines.c to string-inlines.c.
* sysdeps/i386/i486/string-inlines.c: Moved to ...
* sysdeps/i386/string-inlines.c: Here.
|
| |
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move i486/htonl.S to
htonl.S.
* sysdeps/i386/i486/htonl.S: Moved ...
* sysdeps/i386/htonl.S: here.
|
| |
|
|
|
|
|
|
| |
Since glibc doesn't support i386 any more, we can move i486/bits/atomic.h
to bits/atomic.h.
* sysdeps/i386/i486/bits/atomic.h: Moved to ...
* sysdeps/i386/bits/atomic.h: Here.
|
| |
|
|
|
|
|
| |
sysdeps/i386/i486/Versions isn't needed since it duplicates contents
in sysdeps/i386/Versions.
* sysdeps/i386/i486/Versions: Removed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace BZERO_P with USE_AS_BZERO in i586/i686 memset.S to support i386
multi-arch memset. Also we should check SHARED not PIC for libc.so
since libc.a may be compiled with PIC.
* sysdeps/i386/i586/bzero.S (USE_AS_BZERO): New.
* sysdeps/i386/i686/bzero.S (USE_AS_BZERO): Likewise.
* sysdeps/i386/i586/memset.S (BZERO_P): Removed.
Check USE_AS_BZERO/SHARED instead of BZERO_P/PIC.
(__memset_zero_constant_len_parameter): New.
* sysdeps/i386/i686/memset.S (BZERO_P): Removed.
Check USE_AS_BZERO/SHARED instead of BZERO_P/PIC.
(__memset_zero_constant_len_parameter): Don't define if
__memset_chk or USE_AS_BZERO are defined.
|
| |
|
|
|
|
|
|
|
|
| |
Replace MEMPCPY_P with USE_AS_MEMPCPY in i586 memcpy.S to support i386
multi-arch memcpy. Also we should check SHARED not PIC for libc.so
since libc.a may be compiled with PIC.
* sysdeps/i386/i586/memcpy.S (MEMPCPY_P): Removed.
Check USE_AS_MEMPCPY/SHARED instead of MEMPCPY_P/PIC.
* sysdeps/i386/i586/mempcpy.S (USE_AS_MEMPCPY): New.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since x86-64 ld.so preserves vector registers now, we can use SSE in
x86-64 ld.so. We should run tst-ld-sse-use.sh only on i386.
* sysdeps/x86/Makefile [$(subdir) == elf] (CFLAGS-.os,
tests-special, $(objpfx)tst-ld-sse-use.out): Moved to ...
* sysdeps/i386/Makefile [$(subdir) == elf] (CFLAGS-.os,
tests-special, $(objpfx)tst-ld-sse-use.out): Here. Update
comments.
* sysdeps/x86_64/Makefile [$(subdir) == elf] (CFLAGS-.os): Add
-mno-mmx for $(all-rtld-routines).
* sysdeps/x86/tst-ld-sse-use.sh: Moved to ...
* sysdeps/i386/tst-ld-sse-use.sh: Here. Replace x86-64 with
i386.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
sysdeps/i386/i686/multiarch/strcasestr-c.c became unused after
commit 1818483b15d22016b0eae41d37ee91cc87b37510
Author: Andreas Schwab <schwab@suse.de>
Date: Wed Dec 18 11:53:27 2013 +1000
Remove use of SSE4.2 functions for strstr on i686
which contains
-sysdep_routines += strcspn-c strpbrk-c strspn-c strstr-c strcasestr-c
+sysdep_routines += strcspn-c strpbrk-c strspn-c
sysdeps/x86_64/multiarch/strcasestr.c became useless after
t 584b18eb4df61ccd447db2dfe8c8a7901f8c8598
Author: Ondřej Bílka <neleai@seznam.cz>
Date: Sat Dec 14 19:33:56 2013 +0100
Add strstr with unaligned loads. Fixes bug 12100.
which changes sysdeps/x86_64/multiarch/strcasestr.c to
libc_ifunc (__strcasestr, __strcasestr_sse2);
This patch removes these file.
* i386/i686/multiarch/strcasestr-c.c: Removed.
* x86_64/multiarch/strcasestr.c: Likewise.
* x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Remove strcasestr.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Move sysdeps/x86_64/multiarch/init-arch.h to sysdeps/x86/init-arch.h
which can be used for both i386 and x86_64.
* sysdeps/i386/i686/multiarch/init-arch.h: Removed.
* sysdeps/unix/sysv/linux/x86/init-arch.h: Likewise.
* sysdeps/x86_64/cacheinfo.c: Include <init-arch.h> instead
of "multiarch/init-arch.h".
* sysdeps/x86_64/multiarch/init-arch.h: Renamed to ...
* sysdeps/x86/init-arch.h: This.
|
| |
|
|
|
|
|
|
| |
Both files include sysdeps/x86_64/multiarch/init-arch.c which has been
removed.
* sysdeps/i386/i686/multiarch/init-arch.c: Removed.
* sysdeps/unix/sysv/linux/x86/init-arch.c: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The csqrt implementations in glibc can miss underflow exceptions when
the real or imaginary part of the result becomes tiny in the course of
scaling down (in particular, multiplication by 0.5) and that scaling
is exact although the relevant part of the mathematical result isn't.
This patch forces the exception in a similar way to previous fixes.
Tested for x86_64 and x86.
[BZ #18370]
* math/s_csqrt.c (__csqrt): Force underflow exception for results
whose real or imaginary part has small absolute value.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since _dl_x86_cpu_features is always available, we can use x86-64
cacheinfo.c and sysconf.c for both i386 and x86-64.
* sysdeps/i386/i686/Makefile
[$(subdir) == string] (sysdep_routines): Moved to ...
* sysdeps/i386/Makefile: Here.
* sysdeps/i386/i686/cacheinfo.c: Moved to ...
* sysdeps/i386/cacheinfo.c: Here.
* sysdeps/unix/sysv/linux/i386/sysconf.c: Removed.
* sysdeps/unix/sysv/linux/i386/i686/sysconf.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysconf.c: Moved to ...
* sysdeps/unix/sysv/linux/x86/sysconf.c: Here.
|
| |
|
|
| |
Other architectures also had bugs, or did unnecessary work.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds more test inputs to various libm functions found
through random generation to have larger ulps errors than previously
listed in libm-test-ulp, on at least one of x86_64 and x86.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, cbrt, cosh, csqrt, erf, erfc,
exp, exp2, lgamma, log, log1p, log2, pow, sin, sincos, tan, tanh
and tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16520]
* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
(__tanh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
(__tanhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch updates i686 multiarch functions to use the newly defined
HAS_CPU_FEATURE, HAS_ARCH_FEATURE, LOAD_GOT_AND_RTLD_GLOBAL_RO and
LOAD_FUNC_GOT_EAX from <cpu-features.h>.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Replace HAS_XXX
with HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Likewise.
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Likewise.
* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Likewise.
* sysdeps/i386/i686/multiarch/ifunc-impl-list.c: Likewise.
* sysdeps/i386/i686/multiarch/s_fma.c: Likewise.
* sysdeps/i386/i686/multiarch/s_fmaf.c: Likewise.
* sysdeps/i386/i686/multiarch/bcopy.S: Remove __init_cpu_features
call. Merge SHARED and !SHARED. Add LOAD_GOT_AND_RTLD_GLOBAL_RO.
Use LOAD_FUNC_GOT_EAX to load function address. Replace HAS_XXX
with HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
* sysdeps/i386/i686/multiarch/bzero.S: Likewise.
* sysdeps/i386/i686/multiarch/memchr.S: Likewise.
* sysdeps/i386/i686/multiarch/memcmp.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/memmove.S: Likewise.
* sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/mempcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/memrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/memset.S: Likewise.
* sysdeps/i386/i686/multiarch/memset_chk.S: Likewise.
* sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strcasecmp.S: Likewise.
* sysdeps/i386/i686/multiarch/strcat.S: Likewise.
* sysdeps/i386/i686/multiarch/strchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strcmp.S: Likewise.
* sysdeps/i386/i686/multiarch/strcpy.S: Likewise.
* sysdeps/i386/i686/multiarch/strcspn.S: Likewise.
* sysdeps/i386/i686/multiarch/strlen.S: Likewise.
* sysdeps/i386/i686/multiarch/strncase.S: Likewise.
* sysdeps/i386/i686/multiarch/strnlen.S: Likewise.
* sysdeps/i386/i686/multiarch/strrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/strspn.S: Likewise.
* sysdeps/i386/i686/multiarch/wcschr.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscmp.S: Likewise.
* sysdeps/i386/i686/multiarch/wcscpy.S: Likewise.
* sysdeps/i386/i686/multiarch/wcslen.S: Likewise.
* sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise.
* sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds _dl_x86_cpu_features to rtld_global in x86 ld.so
and initializes it early before __libc_start_main is called so that
cpu_features is always available when it is used and we can avoid
calling __init_cpu_features in IFUNC selectors.
* sysdeps/i386/dl-machine.h: Include <cpu-features.c>.
(dl_platform_init): Call init_cpu_features.
* sysdeps/i386/dl-procinfo.c (_dl_x86_cpu_features): New.
* sysdeps/i386/i686/cacheinfo.c
(DISABLE_PREFERRED_MEMORY_INSTRUCTION): Removed.
* sysdeps/i386/i686/multiarch/Makefile (aux): Remove init-arch.
* sysdeps/i386/i686/multiarch/Versions: Removed.
* sysdeps/i386/i686/multiarch/ifunc-defines.sym (KIND_OFFSET):
Removed.
* sysdeps/i386/ldsodefs.h: Include <cpu-features.h>.
* sysdeps/unix/sysv/linux/x86/Makefile
(libpthread-sysdep_routines): Remove init-arch.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Include
<sysdeps/x86_64/dl-procinfo.c> instead of
sysdeps/generic/dl-procinfo.c>.
* sysdeps/x86/Makefile [$(subdir) == csu] (gen-as-const-headers):
Add cpu-features-offsets.sym and rtld-global-offsets.sym.
[$(subdir) == elf] (sysdep-dl-routines): Add dl-get-cpu-features.
[$(subdir) == elf] (tests): Add tst-get-cpu-features.
[$(subdir) == elf] (tests-static): Add
tst-get-cpu-features-static.
* sysdeps/x86/Versions: New file.
* sysdeps/x86/cpu-features-offsets.sym: Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/dl-get-cpu-features.c: Likewise.
* sysdeps/x86/libc-start.c: Likewise.
* sysdeps/x86/rtld-global-offsets.sym: Likewise.
* sysdeps/x86/tst-get-cpu-features-static.c: Likewise.
* sysdeps/x86/tst-get-cpu-features.c: Likewise.
* sysdeps/x86_64/dl-procinfo.c: Likewise.
* sysdeps/x86_64/cacheinfo.c (__cpuid_count): Removed.
Assume USE_MULTIARCH is defined and don't check it.
(is_intel): Replace __cpu_features with GLRO(dl_x86_cpu_features).
(is_amd): Likewise.
(max_cpuid): Likewise.
(intel_check_word): Likewise.
(__cache_sysconf): Don't call __init_cpu_features.
(__x86_preferred_memory_instruction): Removed.
(init_cacheinfo): Don't call __init_cpu_features. Replace
__cpu_features with GLRO(dl_x86_cpu_features).
* sysdeps/x86_64/dl-machine.h: <cpu-features.c>.
(dl_platform_init): Call init_cpu_features.
* sysdeps/x86_64/ldsodefs.h: Include <cpu-features.h>.
* sysdeps/x86_64/multiarch/Makefile (aux): Remove init-arch.
* sysdeps/x86_64/multiarch/Versions: Removed.
* sysdeps/x86_64/multiarch/cacheinfo.c: Likewise.
* sysdeps/x86_64/multiarch/init-arch.c: Likewise.
* sysdeps/x86_64/multiarch/ifunc-defines.sym (KIND_OFFSET):
Removed.
* sysdeps/x86_64/multiarch/init-arch.h: Rewrite.
|
