about summary refs log tree commit diff
path: root/sysdeps/i386/i686
Commit message (Collapse)AuthorAgeFilesLines
* x86: Support usable check for all CPU featuresH.J. Lu2020-07-1314-91/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support usable check for all CPU features with the following changes: 1. Change struct cpu_features to struct cpuid_features { struct cpuid_registers cpuid; struct cpuid_registers usable; }; struct cpu_features { struct cpu_features_basic basic; struct cpuid_features features[COMMON_CPUID_INDEX_MAX]; unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX]; ... }; so that there is a usable bit for each cpuid bit. 2. After the cpuid bits have been initialized, copy the known bits to the usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for CPU feature detection. 3. Clear the usable bits which require OS support. 4. If the feature is supported by OS, copy its cpuid bit to its usable bit. 5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE and CPU_FEATURE_USABLE_P to check if a feature is usable. 6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13. 7. Unset MPX feature since it has been deprecated. The results are 1. If the feature is known and doesn't requre OS support, its usable bit is copied from the cpuid bit. 2. Otherwise, its usable bit is copied from the cpuid bit only if the feature is known to supported by OS. 3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the feature can be used. 4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports the feature.
* i386: Remove NO_TLS_DIRECT_SEG_REFS handlingFlorian Weimer2020-05-282-40/+0
| | | | | This was needed for 32-bit PV Xen, which has been superseded by this point according to Xen developers.
* math: Add inputs that yield larger errors for float type (x86_64)Paul Zimmermann2020-03-311-17/+18
| | | | | | | | | | | The corner cases included were generated using exhaustive search for all float/binary32 values on x86_64 (comparing to MPFR for correct rounding to nearest). For the j0/j1/y0 functions, only cases with ulp error <= 9 were included. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* math: Remove inline math testsAdhemerval Zanella2020-03-191-1086/+0
| | | | | | | | | | | | | With mathinline removal there is no need to keep building and testing inline math tests. The gen-libm-tests.py support to generate ULP_I_* is removed and all libm-test-ulps files are updated to longer have the i{float,double,ldouble} entries. The support for no-test-inline is also removed from both gen-auto-libm-tests and the auto-libm-test-out-* were regenerated. Checked on x86_64-linux-gnu and i686-linux-gnu.
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-037-11/+14
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01135-135/+135
|
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07135-135/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Fix handling of collating elements in fnmatch (bug 17396, bug 16976)Andreas Schwab2019-02-041-1/+2
| | | | | | This fixes the same bug in fnmatch that was fixed by commit 7e2f0d2d77 for regexp matching. As a side effect it also removes the use of an unbound VLA.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-01135-135/+135
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Fix i686 build with GCC 9.Joseph Myers2018-11-126-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the glibc build for i686 with current mainline GCC, where there are warnings about inconsistent attributes for aliases in certain files defining libm IFUNCs. In three of the files, the aliases were defined in terms of internal symbols such as __sinf, and copied attributes from file-local declarations of those functions which lacked the nothrow attribute. Since the nothrow attribute is present on the declarations from <math.h> (which include declarations of those __-prefixed functions), the natural fix was to include <math.h> in those files, replacing the local declarations. In the other three files, a more complicated __hidden_ver1 call was involved in the warnings. <math.h> has not been included at this point and, furthermore, it is included indirectly only later in the source file after macros have been defined to remap a function name therein. So there isn't an obvious declaration from which to copy the attribute and it seems simplest and safest just to add __THROW to the hidden_ver1 calls. Tested for i686 (build-many-glibcs.py compilers build for x86_64-linux-gnu with GCC mainline; full testsuite run with GCC 7). * sysdeps/i386/i686/fpu/multiarch/e_expf.c [SHARED]: Use __THROW with __hidden_ver1 call. * sysdeps/i386/i686/fpu/multiarch/e_log2f.c [SHARED]: Likewise. * sysdeps/i386/i686/fpu/multiarch/e_logf.c [SHARED]: Likewise. * sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include <math.h>. (__cosf): Do not declare here. * sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include <math.h>. (__sincosf): Do not declare here. * sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include <math.h>. (__sinf): Do not declare here.
* x86: Use _rdtsc intrinsic for HP_TIMING_NOWH.J. Lu2018-10-172-44/+7
| | | | | | | | | | | | | | | | | | | | | | | | Since _rdtsc intrinsic is supported in GCC 4.9, we can use it for HP_TIMING_NOW. This patch 1. Create x86 hp-timing.h to replace i686 and x86_64 hp-timing.h. 2. Move MINIMUM_ISA from init-arch.h to isa.h so that x86 hp-timing.h can check minimum x86 ISA to decide if _rdtsc can be used. NB: Checking if __i686__ isn't sufficient since __i686__ may not be defined when building for i686 class processors. * sysdeps/i386/init-arch.h: Removed. * sysdeps/i386/i586/init-arch.h: Likewise. * sysdeps/i386/i686/init-arch.h: Likewise. * sysdeps/i386/i686/hp-timing.h: Likewise. * sysdeps/x86_64/hp-timing.h: Likewise. * sysdeps/i386/isa.h: New file. * sysdeps/i386/i586/isa.h: Likewise. * sysdeps/i386/i686/isa.h: Likewise. * sysdeps/x86_64/isa.h: Likewise. * sysdeps/x86/hp-timing.h: New file. * sysdeps/x86/init-arch.h: Include <isa.h>.
* x86: Don't include <init-arch.h> in assembly codesH.J. Lu2018-08-031-1/+0
| | | | | | | | | | | | There is no need to include <init-arch.h> in assembly codes since all x86 IFUNC selector functions are written in C. Tested on i686 and x86-64. There is no code change in libc.so, ld.so and libmvec.so. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Don't include <init-arch.h>. * sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core-avx2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* i386: Use _CET_NOTRACK in memset-sse2-rep.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/memset-sse2-rep.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in strcat-sse2.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/strcat-sse2.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in strcpy-sse2.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/strcpy-sse2.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in memcpy-ssse3.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/memcpy-ssse3.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in memcpy-ssse3-rep.SH.J. Lu2018-07-181-4/+4
| | | | | | | * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table. (BRANCH_TO_JMPTBL_ENTRY_TAIL): Likewise.
* i386: Use _CET_NOTRACK in memcmp-sse4.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/memcmp-sse4.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in memset-sse2.SH.J. Lu2018-07-181-2/+2
| | | | | | * sysdeps/i386/i686/multiarch/memset-sse2.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Use _CET_NOTRACK in i686/memcmp.SH.J. Lu2018-07-181-2/+2
| | | | | * sysdeps/i386/i686/memcmp.S (memcmp): Add _CET_NOTRACK before indirect jump to jump table.
* i386: Add _CET_ENDBR to indirect jump targets in add_n.S/sub_n.SH.J. Lu2018-07-171-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | i386 add_n.S and sub_n.S use a trick to implment jump tables with LEA. We can't use conditional branches nor normal jump tables since jump table entries use EFLAGS set by jump table index. This patch adds _CET_ENDBR to indirect jump targets and adjust destination for _CET_ENDBR. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/i386/add_n.S: Include <sysdep.h>, instead of "sysdep.h". (__mpn_add_n): Save and restore %ebx if IBT is enabed. Add _CET_ENDBR to indirect jump targets and adjust jump destination for _CET_ENDBR. * sysdeps/i386/i686/add_n.S: Include <sysdep.h>, instead of "sysdep.h". (__mpn_add_n): Save and restore %ebx if IBT is enabed. Add _CET_ENDBR to indirect jump targets and adjust jump destination for _CET_ENDBR. * sysdeps/i386/sub_n.S: Include <sysdep.h>, instead of "sysdep.h". (__mpn_sub_n): Save and restore %ebx if IBT is enabed. Add _CET_ENDBR to indirect jump targets and adjust jump destination for _CET_ENDBR.
* x86: Make strncmp usable from rtldFlorian Weimer2018-06-121-1/+1
| | | | | | | | | Due to the way the conditions were written, the rtld build of strncmp ended up with no definition of the strncmp symbol at all: The implementations were renamed for use within an IFUNC resolver, but the IFUNC resolver itself was missing (because rtld does not use IFUNCs). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* math: Update i686 ulpsFlorian Weimer2018-06-011-270/+278
| | | | | The results are from building with “-march=x86-64 -mtune=generic -mfpmath=sse” and running the testsuite on a Haswell-era CPU.
* Update i386 libm-test-ulps.Adhemerval Zanella2018-04-061-4/+10
| | | | | | | | Updated ulps after recent commit "[PATCH 1/7] sin/cos slow paths: avoid slow paths for small inputs" (19a8b9a300f2f1f0012aff0f2b70b09430f50d9e). * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Update.
* Fix i386 memmove issue (bug 22644).Andrew Senkevich2018-03-231-6/+6
| | | | | | | [BZ #22644] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Fixed branch conditions. * string/test-memmove.c (do_test2): New testcase.
* Update i386 libm-test-ulps.Joseph Myers2018-03-161-12/+12
| | | | | | | | | I found the i386 libm-test-ulps files needed updating (probably the sqrt changes perturbed exactly when excess precision was used by the compiler). * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-01136-136/+136
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Add _Float32 function aliases.Joseph Myers2017-12-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Add _Float64, _Float32x function aliases.Joseph Myers2017-12-061-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Use libm_alias_float for i386.Joseph Myers2017-11-2911-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_float (or libm_alias_float_other in cases where the main symbol name is defined with versioned_symbol) to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>. (asinhf): Define using libm_alias_float. * sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>. (atanf): Define using libm_alias_float. * sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>. (cbrtf): Define using libm_alias_float. * sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>. (ceilf): Define using libm_alias_float. * sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>. (copysignf): Define using libm_alias_float. * sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>. (expm1f): Define using libm_alias_float. * sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>. (fabsf): Define using libm_alias_float. * sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>. (floorf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>. (frexpf): Define using libm_alias_float. * sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>. (llrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>. (logbf): Define using libm_alias_float. * sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>. (lrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>. (nearbyintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>. (remquof): Define using libm_alias_float. * sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>. (rintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>. (truncf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include <libm-alias-float.h>. (exp2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include <libm-alias-float.h>. (expf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include <libm-alias-float.h>. (log2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include <libm-alias-float.h>. (logf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include <libm-alias-float.h>. (powf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include <libm-alias-float.h>. (cosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include <libm-alias-float.h>. (sincosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include <libm-alias-float.h>. (sinf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/i686/multiarch/s_fmaf.c: Include <libm-alias-float.h>. (fmaf): Define using libm_alias_float.
* Use libm_alias_double for i386.Joseph Myers2017-11-283-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_double to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>. (asinh): Define using libm_alias_double. * sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>. (atan): Define using libm_alias_double. * sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>. (cbrt): Define using libm_alias_double. * sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>. (copysign): Define using libm_alias_double. * sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>. (expm1): Define using libm_alias_double. * sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>. (fabs): Define using libm_alias_double. * sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>. (fdim): Define using libm_alias_double. * sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>. (frexp): Define using libm_alias_double. * sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>. (llrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>. (logb): Define using libm_alias_double. * sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>. (remquo): Define using libm_alias_double. * sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double.
* Add _Float64x function aliases.Joseph Myers2017-11-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Use libm_alias_ldouble in sysdeps/i386/fpu.Joseph Myers2017-11-172-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the preparation for additional _FloatN / _FloatNx function aliases by using libm_alias_ldouble for sysdeps/i386/fpu long double functions, so that they can have _Float64x aliases added in future. Tested for x86_64 (which includes some of these implementations) and x86, including build-many-glibcs.py tests that installed stripped shared libraries are unchanged by the patch. * sysdeps/i386/fpu/e_expl.S: Include <libm-alias-ldouble.h>. [USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_asinhl.S: Include <libm-alias-ldouble.h>. (asinhl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_atanl.c: Include <libm-alias-ldouble.h>. (atanl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_cbrtl.S: Include <libm-alias-ldouble.h>. (cbrtl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_ceill.S: Include <libm-alias-ldouble.h>. (ceill): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_copysignl.S: Include <libm-alias-ldouble.h>. (copysignl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>. (fabsl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_floorl.S: Include <libm-alias-ldouble.h>. (floorl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_frexpl.S: Include <libm-alias-ldouble.h>. (frexpl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>. (llrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_logbl.c: Include <libm-alias-ldouble.h>. (logbl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_lrintl.S: Include <libm-alias-ldouble.h>. (lrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nearbyintl.S: Include <libm-alias-ldouble.h>. (nearbyintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nextafterl.c: Include <libm-alias-ldouble.h>. (nextafterl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_remquol.S: Include <libm-alias-ldouble.h>. (remquol): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_rintl.c: Include <libm-alias-ldouble.h>. (rintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_truncl.S: Include <libm-alias-ldouble.h>. (truncl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble.
* i386: Replace assembly versions of e_powf with generic e_powf.cH.J. Lu2017-10-224-7/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces i386 assembly versions of e_powf with generic e_powf.c. For workload-spec2017.wrf, on Nehalem, it improves performance by: Before After Improvement reciprocal-throughput 230.855 78.3358 194% latency 231.685 94.1259 146% On Skylake, it improves performance by: Before After Improvement reciprocal-throughput 239.858 47.4713 405% latency 247.57 93.8798 163% On IvyBridge with --disable-multi-arch, it improves performance by: Before After Improvement reciprocal-throughput 269.078 63.3758 324% latency 271.473 102.091 165% * sysdeps/i386/fpu/e_powf.S: Removed. * sysdeps/i386/fpu/e_powf_log2_data.c: Likewise. * sysdeps/i386/fpu/w_powf.c: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_powf.c. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines): Add e_powf-sse2. (CFLAGS-e_powf-sse2.c): New. * sysdeps/i386/i686/fpu/multiarch/e_powf-sse2.c: New file. * sysdeps/i386/i686/fpu/multiarch/e_powf.c: Likewise.
* i386: Replace assembly versions of e_log2f with generic e_log2f.cH.J. Lu2017-10-224-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces i386 assembly versions of e_log2f with generic e_log2f.c. For workload-spec2017.wrf, on Nehalem, it improves performance by: Before After Improvement reciprocal-throughput 92.3845 30.8752 199% latency 112.855 54.8645 105% On Skylake, it improves performance by: Before After Improvement reciprocal-throughput 98.7488 22.7507 334% latency 118.01 51.6083 128% On IvyBridge with --disable-multi-arch, it improves performance by: Before After Improvement reciprocal-throughput 106.635 28.8596 269% latency 129.888 56.9187 128% * sysdeps/i386/fpu/e_log2f.S: Removed. * sysdeps/i386/fpu/e_log2f_data.c: Likewise. * sysdeps/i386/fpu/w_log2f.c: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_log2f.c. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines): Add e_log2f-sse2. (CFLAGS-e_log2f-sse2.c): New. * sysdeps/i386/i686/fpu/multiarch/e_log2f-sse2.c: New file. * sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Likewise.
* i386: Replace assembly versions of e_logf with generic e_logf.cH.J. Lu2017-10-225-38/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces i386 assembly versions of e_logf with generic e_logf.c. For workload-spec2017.wrf, on Nehalem, it improves performance by: Before After Improvement reciprocal-throughput 73.3865 40.0454 83% latency 90.0985 54.4479 65% On Skylake, it improves performance by: Before After Improvement reciprocal-throughput 75.1384 22.1452 239% latency 91.9441 50.7925 81% On IvyBridge with --disable-multi-arch, it improves performance by: Before After Improvement reciprocal-throughput 84.5575 28.7879 193% latency 103.971 57.5231 80% * sysdeps/i386/fpu/e_logf.S: Removed. * sysdeps/i386/fpu/e_logf_data.c: Likewise. * sysdeps/i386/fpu/w_logf.c: Likewise. * sysdeps/i386/i686/fpu/e_logf.S: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_logf.c. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines): Add e_logf-sse2. (CFLAGS-e_logf-sse2.c): New. * sysdeps/i386/i686/fpu/multiarch/e_logf-sse2.c: New file. * sysdeps/i386/i686/fpu/multiarch/e_logf.c: Likewise.
* i386: Replace assembly versions of e_exp2f with generic e_exp2f.cH.J. Lu2017-10-224-1/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces i386 assembly versions of e_exp2f with generic e_exp2f.c. For workload-spec2017.wrf, on Nehalem, it improves performance by: Before After Improvement reciprocal-throughput 112.996 40.0454 182% latency 126.581 54.4479 132% On Skylake, it improves performance by: Before After Improvement reciprocal-throughput 113.14 39.447 186% latency 136.068 55.684 144% On IvyBridge with --disable-multi-arch, it improves performance by: Before After Improvement reciprocal-throughput 132.521 40.3759 228% latency 145.791 58.4587 149% * sysdeps/i386/fpu/e_exp2f.S: Removed. * sysdeps/i386/fpu/w_exp2f.c: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_exp2f.c. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines): Add e_exp2f-sse2. (CFLAGS-e_exp2f-sse2.c): New. * sysdeps/i386/i686/fpu/multiarch/e_exp2f-sse2.c: New file. * sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Likewise.
* i386: Replace assembly versions of e_expf with generic e_expf.cH.J. Lu2017-10-227-365/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces i386 assembly versions of e_expf with generic e_expf.c. For workload-spec2017.wrf, on Nehalem, it improves performance by: Before After Improvement reciprocal-throughput 55.5724 40.2664 38% latency 80.0687 60.8517 31% On Skylake, it improves performance by: Before After Improvement reciprocal-throughput 62.4056 39.4188 58% latency 85.5496 59.6377 43% On IvyBridge with --disable-multi-arch, it improves performance by: Before After Improvement reciprocal-throughput 133.707 40.3778 231% latency 149.191 63.2515 135% * sysdeps/i386/fpu/e_exp2f_data.c: Removed. * sysdeps/i386/fpu/e_expf.S: Likewise. * sysdeps/i386/fpu/math_errf.c: Likewise. * sysdeps/i386/fpu/w_expf.c: Likewise. * sysdeps/i386/i686/fpu/multiarch/e_expf-ia32.S: Likewise. * sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Likewise. * sysdeps/i386/i686/fpu/multiarch/w_expf.c: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_expf.c. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines): Remove e_expf-ia32. (CFLAGS-e_expf-sse2.c): New. * sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.c: New file. * sysdeps/i386/i686/fpu/multiarch/e_expf.c: Rewritten.
* Do not wrap expf and exp2fSzabolcs Nagy2017-10-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The new generic expf and exp2f code don't need wrappers any more, they set errno inline, so only use the wrappers on targets that need it. (If the wrapper is needed, then the top level wrapper code is included, otherwise empty w_exp*f.c is used to suppress the wrapper.) A powerpc64 expf implementation includes the expf c code directly which needed some changes. * sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper. * sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise * sysdeps/ieee754/flt-32/w_exp2f.c: New file. * sysdeps/ieee754/flt-32/w_expf.c: New file. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for the new expf code. * sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file. * sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file. * sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file. * sysdeps/m68k/m680x0/fpu/w_expf.c: New file. * sysdeps/i386/fpu/w_exp2f.c: New file. * sysdeps/i386/fpu/w_expf.c: New file. * sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file. * sysdeps/x86_64/fpu/w_expf.c: New file.
* Remove remaining _HAVE_STRING_ARCH_* definitions (BZ #18858)Adhemerval Zanella2017-09-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Since the removal of bits/string.h, _HAVE_STRING_ARCH_* are no longer used. This patch removes the unused macros from i686 and x86_64 sysdeps folder. Checked on x86_64-linux-gnu and i686-linux-gnu. * sysdeps/i386/i686/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Remove define. * sysdeps/x86_64/multiarch/stpcpy.c (_HAVE_STRING_ARCH_stpcpy): Likewise. * sysdeps/x86_64/multiarch/strcspn.c (_HAVE_STRING_ARCH_strcspn): Likewise. * sysdeps/x86_64/multiarch/strncat.c (_HAVE_STRING_ARCH_strncat): Likewise. * sysdeps/x86_64/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Likewise. * sysdeps/x86_64/multiarch/strpbrk.c (_HAVE_STRING_ARCH_strpbrk): Likewise. * sysdeps/x86_64/multiarch/strspn.c (_HAVE_STRING_ARCH_strspn): Likewise.
* Obsolete pow10 functions.Joseph Myers2017-09-011-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* i686: Implement IFUNC selectors in CH.J. Lu2017-08-0499-1732/+2078
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sysdeps/i386/i686/multiarch/Makefile (sysdep_routines): Add bcopy-ia32, bzero-ia32, rawmemchr-ia32 memchr-ia32, memcmp-ia32, memcpy-ia32, memmove-ia32, mempcpy-ia32, memset-ia32, strcat-ia32, strchr-ia32, strrchr-ia32, strcpy-ia32, strcmp-ia32, strcspn-ia32, strpbrk-ia32, strspn-ia32, strlen-ia32, stpcpy-ia32, stpncpy-ia32, memcpy_chk-nonshared, mempcpy_chk-nonshared, memmove_chk-nonshared and memset_chk-nonshared * sysdeps/i386/i686/multiarch/bcopy-ia32.S: New file. * sysdeps/i386/i686/multiarch/bcopy.c: Likewise. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.c: Likewise. * sysdeps/i386/i686/multiarch/ifunc-memmove.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-memset.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2-bsf.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2-ssse3.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse4_2.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-ssse3-sse4_2.h: Likewise. * sysdeps/i386/i686/multiarch/memchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.c: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.c: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.c: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.c: Likewise. * sysdeps/i386/i686/multiarch/memmove-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.c: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.c: Likewise. * sysdeps/i386/i686/multiarch/mempcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.c: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr.c: Likewise. * sysdeps/i386/i686/multiarch/memset-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memset.c: Likewise. * sysdeps/i386/i686/multiarch/memset_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.c: Likewise. * sysdeps/i386/i686/multiarch/stpcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy.c: Likewise. * sysdeps/i386/i686/multiarch/stpncpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpncpy.c: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp.c: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp_l.c: Likewise. * sysdeps/i386/i686/multiarch/strcat-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.c: Likewise. * sysdeps/i386/i686/multiarch/strchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.c: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.c: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.c: Likewise. * sysdeps/i386/i686/multiarch/strcspn-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.c: Likewise. * sysdeps/i386/i686/multiarch/strlen-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.c: Likewise. * sysdeps/i386/i686/multiarch/strncase.c: Likewise. * sysdeps/i386/i686/multiarch/strncase_l.c: Likewise. * sysdeps/i386/i686/multiarch/strncat.c: Likewise. * sysdeps/i386/i686/multiarch/strncmp.c: Likewise. * sysdeps/i386/i686/multiarch/strncpy.c: Likewise. * sysdeps/i386/i686/multiarch/strnlen.c: Likewise. * sysdeps/i386/i686/multiarch/strpbrk-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strpbrk.c: Likewise. * sysdeps/i386/i686/multiarch/strrchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.c: Likewise. * sysdeps/i386/i686/multiarch/strspn-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr.c: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.c: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Removed. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy.S: Likewise. * sysdeps/i386/i686/multiarch/stpncpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp_l.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strncase.S: Likewise. * sysdeps/i386/i686/multiarch/strncase_l.S: Likewise. * sysdeps/i386/i686/multiarch/strncat.S: Likewise. * sysdeps/i386/i686/multiarch/strncmp.S: Likewise. * sysdeps/i386/i686/multiarch/strncpy.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strpbrk.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise.
* x86: Remove __memset_zero_constant_len_parameter [BZ #21790]H.J. Lu2017-08-042-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __memset_zero_constant_len_parameter should be removed by commit 61062f56304750c367c5c1533351621353c112a7 Author: Ulrich Drepper <drepper@redhat.com> Date: Tue Mar 1 00:35:23 2005 +0000 2005-02-24 Roland McGrath <roland@redhat.com> * debug/Versions (libc: GLIBC_2.4): Remove __memset_zero_constant_len_parameter. * sysdeps/generic/memset_chk.c: Remove alias and warning. * misc/sys/cdefs.h (__warndecl): New macro. * debug/warning-nop.c: New file. * string/bits/string3.h (memset): Call __warn_memset_zero_len with no arguments, instead of calling __memset_zero_constant_len_parameter. Use __warndecl for __warn_memset_zero_len. * debug/Makefile (routines): Add $(static-only-routines). (static-only-routines): New variable. This patch removes the last emaining pieces of it. Tested it on i586, i686 and x86-64. [BZ #21790] * sysdeps/i386/i586/memset.S (__memset_zero_constant_len_parameter): Removed. * sysdeps/i386/i686/memset.S (__memset_zero_constant_len_parameter): Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S (__memset_zero_constant_len_parameter): Likewise. * sysdeps/x86_64/memset.S (__memset_zero_constant_len_parameter): Likewise.
* i686/multiarch: Regenerate ulpsAurelien Jarno2017-08-031-7/+7
| | | | | | | This comes from running “make regen-ulps” on an AMD Opteron 2378 CPU. Changelog: * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Regenerated.
* i386: Check PIC to enable PIC setups in multiarch functionsH.J. Lu2017-08-028-34/+34
| | | | | | | | | | | | | | Check PIC, instead of SHARED, to enable PIC setups. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Check PIC instead of SHARED. * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise.
* i386: Don't define multiarch __memmove_chk in libc.a [BZ #21791]H.J. Lu2017-08-023-3/+3
| | | | | | | | | | | | | There is no need to define multiarch __memmove_chk in libc.a since they aren't used at all. [BZ #21791] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S (MEMCPY_CHK): Define only if SHARED is defined. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S (MEMCPY_CHK): Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S (MEMCPY_CHK): Likewise.
* i386: Test memmove_chk and memset_chk only in libc.so [BZ #21741]H.J. Lu2017-07-191-0/+4
| | | | | | | | | | Since there are no multiarch versions of memmove_chk and memset_chk, test multiarch versions of memmove_chk and memset_chk only in libc.so. [BZ #21741] * sysdeps/i386/i686/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test memmove_chk and memset_chk only in libc.so.
* Add float128 support for x86_64, x86.Joseph Myers2017-06-261-0/+562
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Update x86 ulps for GCC 7.Joseph Myers2017-06-231-8/+8
| | | | | | | | | | Testing with GCC 7 for 32-bit x86 showed some ulps differences, presumably from variation in when values with excess precision get spilled to the stack and so lose that precision. This patch updates the libm-test-ulps files accordingly. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Remove bits/string.h.Zack Weinberg2017-06-201-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These machine-dependent inline string functions have never been on by default, and even if they were a good idea at the time they were introduced, they haven't really been touched in ten to fifteen years and probably aren't a good idea on current-gen processors. Current thinking is that this class of optimization is best left to the compiler. * bits/string.h, string/bits/string.h * sysdeps/aarch64/bits/string.h * sysdeps/m68k/m680x0/m68020/bits/string.h * sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h * sysdeps/x86/bits/string.h: Delete file. * string/string.h: Don't include bits/string.h. * string/bits/string3.h: Rename to bits/string_fortified.h. No need to undef various symbols that the removed headers might have defined as macros. * string/Makefile (headers): Remove bits/string.h, change bits/string3.h to bits/string_fortified.h. * string/string-inlines.c: Update commentary. Remove definitions of various macros that nothing looks at anymore. Don't directly include bits/string.h. Set _STRING_INLINE_unaligned here, based on compiler-predefined macros. * string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY _is_ defined, provide internal hidden alias __strncat. * include/string.h: Declare internal hidden alias __strncat. Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is not defined. * include/bits/string3.h: Rename to bits/string_fortified.h, update to match above. * sysdeps/i386/string-inlines.c: Define compat symbols for everything formerly defined by sysdeps/x86/bits/string.h. Make existing definitions into compat symbols as well. Remove some no-longer-necessary messing around with macros. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c * sysdeps/s390/multiarch/mempcpy.c No need to define _HAVE_STRING_ARCH_mempcpy. Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * sysdeps/i386/i686/multiarch/strncat-c.c * sysdeps/s390/multiarch/strncat-c.c * sysdeps/x86_64/multiarch/strncat-c.c Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-23 02:23:43 +0000