about summary refs log tree commit diff
path: root/sysdeps/generic
Commit message (Collapse)AuthorAgeFilesLines
...
* elf: Add _dl_find_object functionFlorian Weimer2021-12-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | It can be used to speed up the libgcc unwinder, and the internal _dl_find_dso_for_object function (which is used for caller identification in dlopen and related functions, and in dladdr). _dl_find_object is in the internal namespace due to bug 28503. If libgcc switches to _dl_find_object, this namespace issue will be fixed. It is located in libc for two reasons: it is necessary to forward the call to the static libc after static dlopen, and there is a link ordering issue with -static-libgcc and libgcc_eh.a because libc.so is not a linker script that includes ld.so in the glibc build tree (so that GCC's internal -lc after libgcc_eh.a does not pick up ld.so). It is necessary to do the i386 customization in the sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because otherwise, multilib installations are broken. The implementation uses software transactional memory, as suggested by Torvald Riegel. Two copies of the supporting data structures are used, also achieving full async-signal-safety. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* malloc: Remove memusage.hAdhemerval Zanella2021-12-281-25/+0
| | | | | | And use machine-sp.h instead. The Linux implementation is based on already provided CURRENT_STACK_FRAME (used on nptl code) and STACK_GROWS_UPWARD is replaced with _STACK_GROWS_UP.
* malloc: Use hp-timing on libmemusageAdhemerval Zanella2021-12-281-12/+0
| | | | Instead of reimplemeting on GETTIME macro.
* malloc: Remove atomic_* usageAdhemerval Zanella2021-12-281-14/+0
| | | | | These typedef are used solely on memusage and can be replaced with generic types.
* elf: Add _dl_audit_pltexitAdhemerval Zanella2021-12-283-0/+32
| | | | | | | | | It consolidates the code required to call la_pltexit audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_pltenterAdhemerval Zanella2021-12-281-0/+4
| | | | | | | | | It consolidates the code required to call la_pltenter audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_preinitAdhemerval Zanella2021-12-281-0/+3
| | | | | | | | | It consolidates the code required to call la_preinit audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_symbind_alt and _dl_audit_symbindAdhemerval Zanella2021-12-281-0/+10
| | | | | | | | | It consolidates the code required to call la_symbind{32,64} audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_objcloseAdhemerval Zanella2021-12-281-0/+4
| | | | | | | | | It consolidates the code required to call la_objclose audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_objsearchAdhemerval Zanella2021-12-281-0/+7
| | | | | | | | | It consolidates the code required to call la_objsearch audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_activity_map and _dl_audit_activity_nsidAdhemerval Zanella2021-12-281-0/+10
| | | | | | | | | | | | | It consolidates the code required to call la_activity audit callback. Also for a new Lmid_t the namespace link_map list are empty, so it requires to check if before using it. This can happen for when audit module is used along with dlmopen. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Add _dl_audit_objopenAdhemerval Zanella2021-12-281-0/+5
| | | | | | | | It consolidates the code required to call la_objopen audit callback. Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* hurd: Fix static-PIE startupSamuel Thibault2021-12-281-0/+31
| | | | | | | | hurd initialization stages use RUN_HOOK to run various initialization functions. That is however using absolute addresses which need to be relocated, which is done later by csu. We can however easily make the linker compute relative addresses which thus don't need a relocation. The new SET_RELHOOK and RUN_RELHOOK macros implement this.
* malloc: Add Huge Page support for mmapAdhemerval Zanella2021-12-152-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With the morecore hook removed, there is not easy way to provide huge pages support on with glibc allocator without resorting to transparent huge pages. And some users and programs do prefer to use the huge pages directly instead of THP for multiple reasons: no splitting, re-merging by the VM, no TLB shootdowns for running processes, fast allocation from the reserve pool, no competition with the rest of the processes unlike THP, no swapping all, etc. This patch extends the 'glibc.malloc.hugetlb' tunable: the value '2' means to use huge pages directly with the system default size, while a positive value means and specific page size that is matched against the supported ones by the system. Currently only memory allocated on sysmalloc() is handled, the arenas still uses the default system page size. To test is a new rule is added tests-malloc-hugetlb2, which run the addes tests with the required GLIBC_TUNABLE setting. On systems without a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB) allocation failure. To improve test coverage it is required to create a pool with some allocated pages. Checked on x86_64-linux-gnu. Reviewed-by: DJ Delorie <dj@redhat.com>
* malloc: Add madvise support for Transparent Huge PagesAdhemerval Zanella2021-12-153-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | Linux Transparent Huge Pages (THP) current supports three different states: 'never', 'madvise', and 'always'. The 'never' is self-explanatory and 'always' will enable THP for all anonymous pages. However, 'madvise' is still the default for some system and for such case THP will be only used if the memory range is explicity advertise by the program through a madvise(MADV_HUGEPAGE) call. To enable it a new tunable is provided, 'glibc.malloc.hugetlb', where setting to a value diffent than 0 enables the madvise call. This patch issues the madvise(MADV_HUGEPAGE) call after a successful mmap() call at sysmalloc() with sizes larger than the default huge page size. The madvise() call is disable is system does not support THP or if it has the mode set to "never" and on Linux only support one page size for THP, even if the architecture supports multiple sizes. To test is a new rule is added tests-malloc-hugetlb1, which run the addes tests with the required GLIBC_TUNABLE setting. Checked on x86_64-linux-gnu. Reviewed-by: DJ Delorie <dj@redhat.com>
* Support target specific ALIGN for variable alignment test [BZ #28676]H.J. Lu2021-12-141-0/+20
| | | | | | | | | | | Add <tst-file-align.h> to support target specific ALIGN for variable alignment test: 1. Alpha: Use 0x10000. 2. MicroBlaze and Nios II: Use 0x8000. 3. All others: Use 0x200000. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* math: Add math-use-builtinds-fmin.hAdhemerval Zanella2021-12-132-0/+5
| | | | | It allows the architecture to use the builtin instead of generic implementation.
* math: Add math-use-builtinds-fmax.hAdhemerval Zanella2021-12-136-0/+9
| | | | | It allows the architecture to use the builtin instead of generic implementation.
* Remove TLS_TCB_ALIGN and TLS_INIT_TCB_ALIGNFlorian Weimer2021-12-091-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely introduced to support a configuration where the thread pointer has not the same alignment as THREAD_SELF. Only ia64 seems to use that, but for the stack/pointer guard, not for storing tcbhead_t. Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift the thread pointer, potentially landing in a different residue class modulo the alignment, but the changes should not impact that. In general, given that TLS variables have their own alignment requirements, having different alignment for the (unshifted) thread pointer and struct pthread would potentially result in dynamic offsets, leading to more complexity. hppa had different values before: __alignof__ (tcbhead_t), which seems to be 4, and __alignof__ (struct pthread), which was 8 (old default) and is now 32. However, it defines THREAD_SELF as: /* Return the thread descriptor for the current thread. */ # define THREAD_SELF \ ({ struct pthread *__self; \ __self = __get_cr27(); \ __self - 1; \ }) So the thread pointer points after struct pthread (hence __self - 1), and they have to have the same alignment on hppa as well. Similarly, on ia64, the definitions were different. We have: # define TLS_PRE_TCB_SIZE \ (sizeof (struct pthread) \ + (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \ ? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \ & ~(__alignof__ (struct pthread) - 1)) \ : 0)) # define THREAD_SELF \ ((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE)) And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment (confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c). On m68k, we have a larger gap between tcbhead_t and struct pthread. But as far as I can tell, the port is fine with that. The definition of TCB_OFFSET is sufficient to handle the shifted TCB scenario. This fixes commit 23c77f60181eb549f11ec2f913b4270af29eee38 ("nptl: Increase default TCB alignment to 32"). Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* elf: execve statically linked programs instead of crashing [BZ #28648]Florian Weimer2021-12-051-0/+25
| | | | | | | | | | | | | | | Programs without dynamic dependencies and without a program interpreter are now run via execve. Previously, the dynamic linker either crashed while attempting to read a non-existing dynamic segment (looking for DT_AUDIT/DT_DEPAUDIT data), or the self-relocated in the static PIE executable crashed because the outer dynamic linker had already applied RELRO protection. <dl-execve.h> is needed because execve is not available in the dynamic loader on Hurd. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* elf: Introduce GLRO (dl_libc_freeres), called from __libc_freeresFlorian Weimer2021-11-171-0/+7
| | | | | | | This will be used to deallocate memory allocated using the non-minimal malloc. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* elf: Use the minimal malloc on tunables_strdupAdhemerval Zanella2021-11-091-0/+28
| | | | | | | | | | | | | | | | | | | | The rtld_malloc functions are moved to its own file so it can be used on csu code. Also, the functiosn are renamed to __minimal_* (since there are now used not only on loader code). Using the __minimal_malloc on tunables_strdup() avoids potential issues with sbrk() calls while processing the tunables (I see sporadic elf/tst-dso-ordering9 on powerpc64le with different tests failing due ASLR). Also, using __minimal_malloc over plain mmap optimizes the memory allocation on both static and dynamic case (since it will any unused space in either the last page of data segments, avoiding mmap() call, or from the previous mmap() call). Checked on x86_64-linux-gnu, i686-linux-gnu, and powerpc64le-linux-gnu. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* x86_64: Add support for __memcmpeq using sse2, avx2, and evexNoah Goldstein2021-10-271-1/+4
| | | | | | No bug. This commit adds support for __memcmpeq to be implemented seperately from memcmp. Support is added for versions optimized with sse2, avx2, and evex.
* elf: Fix e6fd79f379 build with --enable-tunables=noAdhemerval Zanella2021-10-211-0/+9
| | | | | | The _dl_sort_maps_init() is not defined when tunables is not enabled. Checked on x86_64-linux-gnu.
* elf: Fix slow DSO sorting behavior in dynamic loader (BZ #17645)Chung-Lin Tang2021-10-211-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This second patch contains the actual implementation of a new sorting algorithm for shared objects in the dynamic loader, which solves the slow behavior that the current "old" algorithm falls into when the DSO set contains circular dependencies. The new algorithm implemented here is simply depth-first search (DFS) to obtain the Reverse-Post Order (RPO) sequence, a topological sort. A new l_visited:1 bitfield is added to struct link_map to more elegantly facilitate such a search. The DFS algorithm is applied to the input maps[nmap-1] backwards towards maps[0]. This has the effect of a more "shallow" recursion depth in general since the input is in BFS. Also, when combined with the natural order of processing l_initfini[] at each node, this creates a resulting output sorting closer to the intuitive "left-to-right" order in most cases. Another notable implementation adjustment related to this _dl_sort_maps change is the removing of two char arrays 'used' and 'done' in _dl_close_worker to represent two per-map attributes. This has been changed to simply use two new bit-fields l_map_used:1, l_map_done:1 added to struct link_map. This also allows discarding the clunky 'used' array sorting that _dl_sort_maps had to sometimes do along the way. Tunable support for switching between different sorting algorithms at runtime is also added. A new tunable 'glibc.rtld.dynamic_sort' with current valid values 1 (old algorithm) and 2 (new DFS algorithm) has been added. At time of commit of this patch, the default setting is 1 (old algorithm). Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ld.so: Initialize bootstrap_map.l_ld_readonly [BZ #28340]H.J. Lu2021-10-192-9/+12
| | | | | | | | | | | | | | | 1. Define DL_RO_DYN_SECTION to initalize bootstrap_map.l_ld_readonly before calling elf_get_dynamic_info to get dynamic info in bootstrap_map, 2. Define a single static inline bool dl_relocate_ld (const struct link_map *l) { /* Don't relocate dynamic section if it is readonly */ return !(l->l_ld_readonly || DL_RO_DYN_SECTION); } This updates BZ #28340 fix.
* elf: Fix dynamic-link.h usage on rtld.cAdhemerval Zanella2021-10-142-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on rtld.c due two issues: 1. RTLD_BOOTSTRAP is also used on dl-machine.h on various architectures and it changes the semantics of various machine relocation functions. 2. The elf_get_dynamic_info() change was done sideways, previously to 490e6c62aa get-dynamic-info.h was included by the first dynamic-link.h include *without* RTLD_BOOTSTRAP being defined. It means that the code within elf_get_dynamic_info() that uses RTLD_BOOTSTRAP is in fact unused. To fix 1. this patch now includes dynamic-link.h only once with RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have the relocation fnctions with the expected semantics for the loader. And to fix 2. part of 4af6982e4c is reverted (the check argument elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP pieces are removed. To reorganize the includes the static TLS definition is moved to its own header to avoid a circular dependency (it is defined on dynamic-link.h and dl-machine.h requires it at same time other dynamic-link.h definition requires dl-machine.h defitions). Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL are moved to its own header. Only ancient ABIs need special values (arm, i386, and mips), so a generic one is used as default. The powerpc Elf64_FuncDesc is also moved to its own header, since csu code required its definition (which would require either include elf/ folder or add a full path with elf/). Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32, and powerpc64le. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* Add run-time check for indirect external accessH.J. Lu2021-10-071-0/+54
| | | | | | | | | | | | | When performing symbol lookup for references in executable without indirect external access: 1. Disallow copy relocations in executable against protected data symbols in a shared object with indirect external access. 2. Disallow non-zero symbol values of undefined function symbols in executable, which are used as the function pointer, against protected function symbols in a shared object with indirect external access. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Initial support for GNU_PROPERTY_1_NEEDEDH.J. Lu2021-10-072-2/+10
| | | | | | | | | | | | | | | | | 1. Add GNU_PROPERTY_1_NEEDED: #define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO to indicate the needed properties by the object file. 2. Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS: #define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0) to indicate that the object file requires canonical function pointers and cannot be used with copy relocation. 3. Scan GNU_PROPERTY_1_NEEDED property and store it in l_1_needed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* elf: Avoid deadlock between pthread_create and ctors [BZ #28357]Szabolcs Nagy2021-10-041-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fix for bug 19329 caused a regression such that pthread_create can deadlock when concurrent ctors from dlopen are waiting for it to finish. Use a new GL(dl_load_tls_lock) in pthread_create that is not taken around ctors in dlopen. The new lock is also used in __tls_get_addr instead of GL(dl_load_lock). The new lock is held in _dl_open_worker and _dl_close_worker around most of the logic before/after the init/fini routines. When init/fini routines are running then TLS is in a consistent, usable state. In _dl_open_worker the new lock requires catching and reraising dlopen failures that happen in the critical section. The new lock is reinitialized in a fork child, to keep the existing behaviour and it is kept recursive in case malloc interposition or TLS access from signal handlers can retake it. It is not obvious if this is necessary or helps, but avoids changing the preexisting behaviour. The new lock may be more appropriate for dl_iterate_phdr too than GL(dl_load_write_lock), since TLS state of an incompletely loaded module may be accessed. If the new lock can replace the old one, that can be a separate change. Fixes bug 28357. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Disable symbol hack in libc_nonshared.aH.J. Lu2021-09-271-1/+2
| | | | | Don't reference __GI_memmove, __GI_memset, __GI_memcpy, __divdi3_internal, __udivdi3_internal and __moddi3_internal in libc_nonshared.a.
* ld.so: Replace DL_RO_DYN_SECTION with dl_relocate_ld [BZ #28340]H.J. Lu2021-09-222-5/+34
| | | | | | | | | | | | | | | | | We can't relocate entries in dynamic section if it is readonly: 1. Add a l_ld_readonly field to struct link_map to indicate if dynamic section is readonly and set it based on p_flags of PT_DYNAMIC segment. 2. Replace DL_RO_DYN_SECTION with dl_relocate_ld to decide if dynamic section should be relocated. 3. Remove DL_RO_DYN_TEMP_CNT. 4. Don't use a static dynamic section to make readonly dynamic section in vDSO writable. 5. Remove the temp argument from elf_get_dynamic_info. This fixes BZ #28340. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Extend struct r_debug to support multiple namespaces [BZ #15971]H.J. Lu2021-09-191-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Glibc does not provide an interface for debugger to access libraries loaded in multiple namespaces via dlmopen. The current rtld-debugger interface is described in the file: elf/rtld-debugger-interface.txt under the "Standard debugger interface" heading. This interface only provides access to the first link-map (LM_ID_BASE). 1. Bump r_version to 2 when multiple namespaces are used. This triggers the GDB bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28236 2. Add struct r_debug_extended to extend struct r_debug into a linked-list, where each element correlates to an unique namespace. 3. Initialize the r_debug_extended structure. Bump r_version to 2 for the new namespace and add the new namespace to the namespace linked list. 4. Add _dl_debug_update to return the address of struct r_debug' of a namespace. 5. Add a hidden symbol, _r_debug_extended, for struct r_debug_extended. 6. Provide the symbol, _r_debug, with size of struct r_debug, as an alias of _r_debug_extended, for programs which reference _r_debug. This fixes BZ #15971. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Remove THREAD_GSCOPE_IN_TCBSergey Bugaev2021-09-162-12/+0
| | | | | | | | | All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all support for !THREAD_GSCOPE_IN_TCB, along with the definition itself. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-4-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* htl: Move thread table to ld.soSergey Bugaev2021-09-161-0/+9
| | | | | | | | | | | The next commit is going to introduce a new implementation of THREAD_GSCOPE_WAIT which needs to access the list of threads. Since it must be usable from the dynamic laoder, we have to move the symbols for the list of threads into the loader. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210915171110.226187-2-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* elf: Replace most uses of THREAD_GSCOPE_IN_TCBSergey Bugaev2021-09-151-5/+6
| | | | | | | | | | | | | | | | | | | | | | While originally this definition was indeed used to distinguish between the cases where the GSCOPE flag was stored in TCB or not, it has since become used as a general way to distinguish between HTL and NPTL. THREAD_GSCOPE_IN_TCB will be removed in the following commits, as HTL, which currently is the only port that does not put the flag into TCB, will get ported to put the GSCOPE flag into the TCB as well. To prepare for that change, migrate all code that wants to distinguish between HTL and NPTL to use PTHREAD_IN_LIBC instead, which is a better choice since the distinction mostly has to do with whether libc has access to the list of thread structures and therefore can initialize thread-local storage. The parts of code that actually depend on whether the GSCOPE flag is in TCB are left unchanged. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com> Message-Id: <20210907133325.255690-2-bugaevc@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* Add narrowing square root functionsJoseph Myers2021-09-106-0/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
* Remove "Contributed by" linesSiddhesh Poyarekar2021-09-0319-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Remove sysdeps/*/tls-macros.hFangrui Song2021-08-181-12/+0
| | | | | | | | They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now that we have migrated to __thread and tls_model attributes, these macros are unused and the tls-macros.h files can retire. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* mtrace: Wean away from malloc hooksSiddhesh Poyarekar2021-07-221-1/+0
| | | | | | | | | | | | | Wean mtrace away from the malloc hooks and move them into the debug DSO. Split the API away from the implementation so that we can add the API to libc.so as well as libc_malloc_debug.so, with the libc implementations being empty. Update localplt data since memalign no longer has any callers after this change. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Move malloc hooks into a compat DSOSiddhesh Poyarekar2021-07-221-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove all malloc hook uses from core malloc functions and move it into a new library libc_malloc_debug.so. With this, the hooks now no longer have any effect on the core library. libc_malloc_debug.so is a malloc interposer that needs to be preloaded to get hooks functionality back so that the debugging features that depend on the hooks, i.e. malloc-check, mcheck and mtrace work again. Without the preloaded DSO these debugging features will be nops. These features will be ported away from hooks in subsequent patches. Similarly, legacy applications that need hooks functionality need to preload libc_malloc_debug.so. The symbols exported by libc_malloc_debug.so are maintained at exactly the same version as libc.so. Finally, static binaries will no longer be able to use malloc debugging features since they cannot preload the debugging DSO. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* elf: Fix DTV gap reuse logic (BZ #27135)Adhemerval Zanella2021-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This is updated version of the 572bd547d57a (reverted by 40ebfd016ad2) that fixes the _dl_next_tls_modid issues. This issue with 572bd547d57a patch is the DTV entry will be only update on dl_open_worker() with the update_tls_slotinfo() call after all dependencies are being processed by _dl_map_object_deps(). However _dl_map_object_deps() itself might call _dl_next_tls_modid(), and since the _dl_tls_dtv_slotinfo_list::map is not yet set the entry will be wrongly reused. This patch fixes by renaming the _dl_next_tls_modid() function to _dl_assign_tls_modid() and by passing the link_map so it can set the slotinfo value so a subsequente _dl_next_tls_modid() call will see the entry as allocated. The intermediary value is cleared up on remove_slotinfo() for the case a library fails to load with RTLD_NOW. This patch fixes BZ #27135. Checked on x86_64-linux-gnu. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* Add a generic malloc test for MALLOC_ALIGNMENTH.J. Lu2021-07-092-1/+64
| | | | | | | | | 1. Add sysdeps/generic/malloc-size.h to define size related macros for malloc. 2. Move x86_64/tst-mallocalign1.c to malloc and replace ALIGN_MASK with MALLOC_ALIGN_MASK. 3. Add tst-mallocalign1 to tests-exclude-mcheck for i386 and x32 since mcheck doesn't honor MALLOC_ALIGNMENT.
* posix: Add posix_spawn_file_actions_addclosefrom_npAdhemerval Zanella2021-07-081-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a way to close a range of file descriptors on posix_spawn as a new file action. The API is similar to the one provided by Solaris 11 [1], where the file action causes the all open file descriptors greater than or equal to input on to be closed when the new process is spawned. The function posix_spawn_file_actions_addclosefrom_np is safe to be implemented by iterating over /proc/self/fd, since the Linux spawni.c helper process does not use CLONE_FILES, so its has own file descriptor table and any failure (in /proc operation) aborts the process creation and returns an error to the caller. I am aware that this file action might be redundant to the current approach of POSIX in promoting O_CLOEXEC in more interfaces. However O_CLOEXEC is still not the default and for some specific usages, the caller needs to close all possible file descriptors to avoid them leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK jspawnhelper [2] (where OpenJDK spawns a helper process to exactly closes all file descriptors). Most likely any environment which calls functions that might open file descriptor under the hood and aim to use posix_spawn might face the same requirement. Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15. [1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html [2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
* Linux: Cleanups after librt moveFlorian Weimer2021-06-281-31/+12
| | | | | | | | | | | | librt.so is no longer installed for PTHREAD_IN_LIBC, and tests are not linked against it. $(librt) is introduced globally for shared tests that need to be linked for both PTHREAD_IN_LIBC and !PTHREAD_IN_LIBC. GLIBC_PRIVATE symbols that were needed during the transition are removed again. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Use GCC builtins for roundeven functions if desired.Shen-Ta Hsieh2021-06-272-0/+5
| | | | | | | | | | | | | This patch is using the corresponding GCC builtin for roundevenf, roundeven and roundevenl if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. These builtin functions is supported since GCC 10. The code of the generic implementation is not changed. Signed-off-by: Shen-Ta Hsieh <ibmibmibm.tw@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* Linux: Move aio_init from librt into libcFlorian Weimer2021-06-251-12/+31
| | | | | | | | | This commit also moves the aio_misc and aio_sigquue helper, so GLIBC_PRIVATE exports need to be added. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* posix: Consolidate fork implementationAdhemerval Zanella2021-06-241-0/+32
| | | | | | | | | | | | | | | | The Linux nptl implementation is used as base for generic fork implementation to handle the internal locks and mutexes. The system specific bits are moved a new internal _Fork symbol. (This new implementation will be used to provide a async-signal-safe _Fork now that POSIX has clarified that fork might not be async-signal-safe [1]). For Hurd it means that the __nss_database_fork_prepare_parent and __nss_database_fork_subprocess will be run in a slight different order. [1] https://austingroupbugs.net/view.php?id=62
* rt: Move generic implementation from sysdeps/pthread to rtFlorian Weimer2021-06-221-4/+79
| | | | | | | | | | | | | | | | | | The pthread-based implementation is the generic one. Replacing the stubs makes it clear that they do not have to be adjusted for the libpthread move. Result of: git mv -f sysdeps/pthread/aio_misc.h sysdeps/generic/ git mv sysdeps/pthread/timer_routines.c sysdeps/htl/ git mv -f sysdeps/pthread/{aio,lio,timer}_*.c rt/ Followed by manual adjustment of the #include paths in sysdeps/unix/sysv/linux/wordsize-64, and a move of the version definitions formerly in sysdeps/pthread/Versions. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* y2038: Add support for 64-bit time on legacy ABIsAdhemerval Zanella2021-06-152-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new build flag, _TIME_BITS, enables the usage of the newer 64-bit time symbols for legacy ABI (where 32-bit time_t is default). The 64 bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is also used. Different than LFS support, the y2038 symbols are added only for the required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32, mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with 64-bit time support are unchanged, both for symbol and types redirection. On Linux the full 64-bit time support requires a minimum of kernel version v5.1. Otherwise, the 32-bit fallbacks are used and might results in error with overflow return code (EOVERFLOW). The i686-gnu does not yet support 64-bit time. This patch exports following rediretions to support 64-bit time: * libc: adjtime adjtimex clock_adjtime clock_getres clock_gettime clock_nanosleep clock_settime cnd_timedwait ctime ctime_r difftime fstat fstatat futimens futimes futimesat getitimer getrusage gettimeofday gmtime gmtime_r localtime localtime_r lstat_time lutimes mktime msgctl mtx_timedlock nanosleep nanosleep ntp_gettime ntp_gettimex ppoll pselec pselect pthread_clockjoin_np pthread_cond_clockwait pthread_cond_timedwait pthread_mutex_clocklock pthread_mutex_timedlock pthread_rwlock_clockrdlock pthread_rwlock_clockwrlock pthread_rwlock_timedrdlock pthread_rwlock_timedwrlock pthread_timedjoin_np recvmmsg sched_rr_get_interval select sem_clockwait semctl semtimedop sem_timedwait setitimer settimeofday shmctl sigtimedwait stat thrd_sleep time timegm timerfd_gettime timerfd_settime timespec_get utime utimensat utimes utimes wait3 wait4 * librt: aio_suspend mq_timedreceive mq_timedsend timer_gettime timer_settime * libanl: gai_suspend Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-19 21:39:15 +0000