about summary refs log tree commit diff
path: root/sysdeps/generic
Commit message (Collapse)AuthorAgeFilesLines
* aarch64: enable BTI at runtimeSudakshina Das2020-06-121-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Binaries can opt-in to using BTI via an ELF object file marking. The dynamic linker has to then mprotect the executable segments with PROT_BTI. In case of static linked executables or in case of the dynamic linker itself, PROT_BTI protection is done by the operating system. On AArch64 glibc uses PT_GNU_PROPERTY instead of PT_NOTE to check the properties of a binary because PT_NOTE can be unreliable with old linkers (old linkers just append the notes of input objects together and add them to the output without checking them for consistency which means multiple incompatible GNU property notes can be present in PT_NOTE). A new _dl_process_pt_gnu_property hook is introduced in dl-prop.h and to keep it maintainable the rtld and dlopen code paths use the same function (if the main map needs special treatment, that should be inferred by the hook from the link map). Unlike the _dt_process_pt_note hook this one is called after segments are mapped to avoid unbounded allocation and additional read syscall. Otherwise the AArch64 logic follows the x86 logic for handling GNU properties (but the code is not shared because x86 needs to manage internal CET state and look out for multiple property notes). BTI property is handled in the loader even if glibc is not built with BTI support, so in theory user code can be BTI protected independently of glibc. In practice though user binaries are not marked with the BTI property if glibc has no support because the static linked libc objects (crt files, libc_nonshared.a) are unmarked. This patch relies on Linux userspace API that is scheduled to be merged in Linux 5.8 and now it is in the for-next/bti-user branch of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git. Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update HP_TIMING_NOW for _ISOMAC in sysdeps/generic/hp-timing.hH.J. Lu2020-06-051-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | commit e9698175b0b60407db1e89bcf29437ab224bca0b Author: Lukasz Majewski <lukma@denx.de> Date: Mon Mar 16 08:31:41 2020 +0100 y2038: Replace __clock_gettime with __clock_gettime64 breaks benchtests with sysdeps/generic/hp-timing.h: In file included from ./bench-timing.h:23, from ./bench-skeleton.c:25, from /export/build/gnu/tools-build/glibc-gitlab/build-x86_64-linux/benchtests/bench-rint.c:45: ./bench-skeleton.c: In function ‘main’: ../sysdeps/generic/hp-timing.h:37:23: error: storage size of ‘tv’ isn’t known 37 | struct __timespec64 tv; \ | ^~ Define HP_TIMING_NOW with clock_gettime in sysdeps/generic/hp-timing.h if _ISOMAC is defined. Don't define __clock_gettime in bench-timing.h since it is no longer needed. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* ieee754: provide gcc builtins based generic fma functionsVineet Gupta2020-06-031-0/+5
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ieee754: provide gcc builtins based generic sqrt functionsVineet Gupta2020-06-031-0/+3
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Hurd: Use __sigmask in favor of deprecated sigmaskFlorian Weimer2020-05-281-2/+2
| | | | | | | | | This fixes various build errors due to deprecation warnings. Fixes commit 02802fafcf6e11ea3f998f685035ffe568dfddeb ("signal: Deprecate additional legacy signal handling functions"). Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* elf: Turn _dl_printf, _dl_error_printf, _dl_fatal_printf into functionsFlorian Weimer2020-05-251-12/+7
| | | | | | | | | | | | | | This change makes it easier to set a breakpoint on these calls. This also addresses the issue that including <ldsodefs.h> without <unistd.h> does not result usable _dl_*printf macros because of the use of the STD*_FILENO macros there. (The private symbol for _dl_fatal_printf will go away again once the exception handling implementation is unified between libc and ld.so.) Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* y2038: Replace __clock_gettime with __clock_gettime64Lukasz Majewski2020-05-202-4/+4
| | | | | | | | | | | | The __clock_gettime internal function is not supporting 64 bit time on architectures with __WORDSIZE == 32 and __TIMESIZE != 64 (like e.g. ARM 32 bit). The __clock_gettime64 function shall be used instead in the glibc itself as it supports 64 bit time on those systems. This patch does not bring any changes to systems with __WORDSIZE == 64 as for them the __clock_gettime64 is aliased to __clock_gettime (in ./include/time.h).
* elf: Implement __libc_early_initFlorian Weimer2020-04-241-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function is defined in libc.so, and the dynamic loader calls right after relocation has been finished, before any ELF constructors or the preinit function is invoked. It is also used in the static build for initializing parts of the static libc. To locate __libc_early_init, a direct symbol lookup function is used, _dl_lookup_direct. It does not search the entire symbol scope and consults merely a single link map. This function could also be used to implement lookups in the vDSO (as an optimization). A per-namespace variable (libc_map) is added for locating libc.so, to avoid repeated traversals of the search scope. It is similar to GL(dl_initfirst). An alternative would have been to thread a context argument from _dl_open down to _dl_map_object_from_fd (where libc.so is identified). This could have avoided the global variable, but the change would be larger as a result. It would not have been possible to use this to replace GL(dl_initfirst) because that global variable is used to pass the function pointer past the stack switch from dl_main to the main program. Replacing that requires adding a new argument to _dl_init, which in turn needs changes to the architecture-specific libc.so startup code written in assembler. __libc_early_init should not be used to replace _dl_var_init (as it exists today on some architectures). Instead, _dl_lookup_direct should be used to look up a new variable symbol in libc.so, and that should then be initialized from the dynamic loader, immediately after the object has been loaded in _dl_map_object_from_fd (before relocation is run). This way, more IFUNC resolvers which depend on these variables will work. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Introduce <elf_machine_sym_no_match.h>Florian Weimer2020-04-241-0/+34
| | | | | | | | | | | MIPS needs to ignore certain existing symbols during symbol lookup. The old scheme uses the ELF_MACHINE_SYM_NO_MATCH macro, with an inline function, within its own header, with a sysdeps override for MIPS. This allows re-use of the function from another file (without having to include <dl-machine.h> or providing the default definition for ELF_MACHINE_SYM_NO_MATCH). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* ldbl-128ibm-compat: Provide ieee128 symbols to narrow functionsTulio Magno Quites Machado Filho2020-02-201-0/+32
| | | | | | | | | | Move the narrow math aliasing macros into a new sysdep header file math-narrow-alias-float128.h. Then, provide an override header to supply the necessary changes to supply the *ieee128 aliases of these symbols. This adds ieee128 aliases for faddl, fdivl, fmull, fsubl, daddl, ddivl, dmull, dsubl.
* Introduce <elf-initfini.h> and ELF_INITFINI for all architecturesFlorian Weimer2020-02-183-0/+76
| | | | | | | | | | | | | | | | This supersedes the init_array sysdeps directory. It allows us to check for ELF_INITFINI in both C and assembler code, and skip DT_INIT and DT_FINI processing completely on newer architectures. A new header file is needed because <dl-machine.h> is incompatible with assembler code. <sysdep.h> is compatible with assembler code, but it cannot be included in all assembler files because on some architectures, it redefines register names, and some assembler files conflict with that. <elf-initfini.h> is replicated for legacy architectures which need DT_INIT/DT_FINI support. New architectures follow the generic default and disable it.
* mips: Fix bracktrace result for signal framesAdhemerval Zanella2020-02-181-0/+30
| | | | | | | | | | | | | | | | MIPS fallback code handle a frame where its FDE can not be obtained (for instance a signal frame) by reading the kernel allocated signal frame and adding '2' to the value of 'sc_pc' [1]. The added value is used to recognize an end of an EH region on mips16 [2]. The fix adjust the obtained signal frame value and remove the libgcc added value by checking if the previous frame is a signal frame one. Checked with backtrace and tst-sigcontext-get_pc tests on mips-linux-gnu and mips64-linux-gnu. [1] libgcc/config/mips/linux-unwind.h from gcc code. [2] gcc/config/mips/mips.h from gcc code. */
* <fd_to_filename.h>: Add type safety and port to HurdFlorian Weimer2020-02-182-8/+37
| | | | | | | | | The new type struct fd_to_filename makes the allocation of the backing storage explicit. Hurd uses /dev/fd, not /proc/self/fd. Co-Authored-By: Paul Eggert <eggert@cs.ucla.edu>
* ld.so: Do not export free/calloc/malloc/realloc functions [BZ #25486]Florian Weimer2020-02-151-6/+0
| | | | | | | | | | | | | | | | | | | Exporting functions and relying on symbol interposition from libc.so makes the choice of implementation dependent on DT_NEEDED order, which is not what some compiler drivers expect. This commit replaces one magic mechanism (symbol interposition) with another one (preprocessor-/compiler-based redirection). This makes the hand-over from the minimal malloc to the full malloc more explicit. Removing the ABI symbols is backwards-compatible because libc.so is always in scope, and the dynamic loader will find the malloc-related symbols there since commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* powerpc: Move cache line size to rtld_global_roTulio Magno Quites Machado Filho2020-01-171-0/+21
| | | | | | | | | | | | | | GCC 10.0 enabled -fno-common by default and this started to point that __cache_line_size had been implemented in 2 different places: loader and libc. In order to avoid this duplication, the libc variable has been removed and the loader variable is moved to rtld_global_ro. File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order to reuse code for both static and dynamic linking scenarios. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Move vDSO setup to rtld (BZ#24967)Adhemerval Zanella2020-01-034-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | This patch moves the vDSO setup from libc to loader code, just after the vDSO link_map setup. For static case the initialization is moved to _dl_non_dynamic_init instead. Instead of using the mangled pointer, the vDSO data is set as attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for static). It is read-only even with partial relro. It fixes BZ#24967 now that the vDSO pointer is setup earlier than malloc interposition is called. Also, vDSO calls should not be a problem for static dlopen as indicated by BZ#20802. The vDSO pointer would be zero-initialized and the syscall will be issued instead. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and sparcv9-linux-gnu. I also run some tests on mips. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-031-2/+3
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01128-128/+128
|
* Fix return code for __libc_signal_* functionsAdhemerval Zanella2019-12-271-6/+6
| | | | | | | | The functions do not fail regardless of the argument value. Also, for Linux the return value is not correct on some platforms due the missing usage of INTERNAL_SYSCALL_ERROR_P / INTERNAL_SYSCALL_ERRNO macros. Checked on x86_64-linux-gnu, i686-linux-gnu, and sparc64-linux-gnu.
* Remove __waitpid_nocancelAdhemerval Zanella2019-12-191-2/+0
| | | | | | | | | It enables and disables cancellation with pthread_setcancelstate before calling the waitpid. It simplifies the waitpid implementation for architectures that do not provide either __NR_waitpid or __NR_wait4. Checked on x86_64-linux-gnu.
* Use GCC builtins for copysign functions if desired.Stefan Liebler2019-12-111-0/+9
| | | | | | | | | | | | This patch is always using the corresponding GCC builtin for copysignf, copysign, and is using the builtin for copysignl, copysignf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. Altough the long double version is enabled by default we still need the macro and the alternative implementation as the _Float128 version of the builtin is not available with all supported GCC versions. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for round functions if desired.Stefan Liebler2019-12-111-0/+5
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for roundf, round, roundl and roundf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for trunc functions if desired.Stefan Liebler2019-12-111-0/+5
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for truncf, trunc, truncl and truncf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for ceil functions if desired.Stefan Liebler2019-12-111-0/+5
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for ceilf, ceil, ceill and ceilf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for floor functions if desired.Stefan Liebler2019-12-111-0/+5
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for floorf, floor, floorl and floorf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for rint functions if desired.Stefan Liebler2019-12-111-0/+5
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for rintf, rint, rintl and rintf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use GCC builtins for nearbyint functions if desired.Stefan Liebler2019-12-111-0/+29
| | | | | | | | | | | | This patch is using the corresponding GCC builtin for nearbyintf, nearbyint, nearbintl and nearbyintf128 if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. This is the case for s390 if build with at least --march=z196 --mzarch. Otherwise the generic implementation is used. The code of the generic implementation is not changed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]Florian Weimer2019-11-271-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | This change splits the scope and TLS slotinfo updates in dlopen into two parts: one to resize the data structures, and one to actually apply the update. The call to add_to_global_resize in dl_open_worker is moved before the demarcation point at which no further memory allocations are allowed. _dl_add_to_slotinfo is adjusted to make the list update optional. There is some optimization possibility here because we could grow the slotinfo list of arrays in a single call, one the largest TLS modid is known. This commit does not fix the fatal meory allocation failure in _dl_update_slotinfo. Ideally, this error during dlopen should be recoverable. The update order of scopes and TLS data structures is retained, although it appears to be more correct to fully initialize TLS first, and then expose symbols in the newly loaded objects via the scope update. Tested on x86_64-linux-gnu. Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
* Avoid late failure in dlopen in global scope update [BZ #25112]Florian Weimer2019-11-271-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | The call to add_to_global in dl_open_worker happens after running ELF constructors for new objects. At this point, proper recovery from malloc failure would be quite complicated: We would have to run the ELF destructors and close all opened objects, something that we currently do not do. Instead, this change splits add_to_global into two phases, add_to_global_resize (which can raise an exception, called before ELF constructors run), and add_to_global_update (which cannot, called after ELF constructors). A complication arises due to recursive dlopen: After the inner dlopen consumes some space, the pre-allocation in the outer dlopen may no longer be sufficient. A new member in the namespace structure, _ns_global_scope_pending_adds keeps track of the maximum number of objects that need to be added to the global scope. This enables the inner add_to_global_resize call to take into account the needs of an outer dlopen. Most code in the dynamic linker assumes that the number of global scope entries fits into an unsigned int (matching the r_nlist member of struct r_scop_elem). Therefore, change the type of _ns_global_scope_alloc to unsigned int (from size_t), and add overflow checks. Change-Id: Ie08e2f318510d5a6a4bcb1c315f46791b5b77524
* Enable inlining issignalingf within glibcPaul A. Clarke2019-11-211-29/+0
| | | | | | | | | issignalingf is a very small function used in some areas where better performance (and smaller code) might be helpful. Create inline implementation for issignalingf. Reviewed-by: Joseph Myers <joseph@codesourcery.com>
* Introduce DL_LOOKUP_FOR_RELOCATE flag for _dl_lookup_symbol_xFlorian Weimer2019-11-211-0/+3
| | | | | | | | | | This will allow changes in dependency processing during non-lazy binding, for more precise processing of NODELETE objects: During initial relocation in dlopen, the fate of NODELETE objects is still unclear, so objects which are depended upon by NODELETE objects cannot immediately be marked as NODELETE. Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
* Enhance _dl_catch_exception to allow disabling exception handlingFlorian Weimer2019-11-161-1/+3
| | | | | | | | | | | | In some cases, it is necessary to introduce noexcept regions where raised dynamic loader exceptions (e.g., from lazy binding) are fatal, despite being nested in a code region with an active exception handler. This change enhances _dl_catch_exception with to provide such a capability. The existing function is reused, so that it is not necessary to introduce yet another function with a similar purpose. Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
* Avoid zero-length array at the end of struct link_map [BZ #25097]Florian Weimer2019-11-151-4/+13
| | | | | | | | | | | | l_audit ends up as an internal array with _rtld_global, and GCC 10 warns about this. This commit does not change the layout of _rtld_global, so it is suitable for backporting. Future changes could allocate more of the audit state dynamically and remove it from always-allocated data structures, to optimize the common case of inactive auditing. Change-Id: Ic911100730f9124d4ea977ead8e13cee64b84d45
* Introduce link_map_audit_state accessor functionFlorian Weimer2019-11-151-1/+7
| | | | | | | | | | | | To improve GCC 10 compatibility, it is necessary to remove the l_audit zero-length array from the end of struct link_map. In preparation of that, this commit introduces an accessor function for the audit state, so that it is possible to change the representation of the audit state without adjusting the code that accesses it. Tested on x86_64-linux-gnu. Built on i686-gnu. Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
* slotinfo in struct dtv_slotinfo_list should be flexible array [BZ #25097]Florian Weimer2019-11-121-1/+1
| | | | | | | | | GCC 10 will warn about subscribing inner length zero arrays. Use a GCC extension in csu/libc-tls.c to allocate space for the static_slotinfo variable. Adjust nptl_db so that the type description machinery does not attempt to determine the size of the flexible array member slotinfo. Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
* Remove pause and nanosleep not cancel wrappersAdhemerval Zanella2019-10-311-4/+0
| | | | | | Since they are not used any longer. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Use clock_gettime to implement time.Adhemerval Zanella2019-10-301-0/+20
| | | | | | | | | | | | | | | | | Change the default implementation of time to call clock_gettime, to align with new Linux ports that are expected to only implement __NR_clock_gettime. Arch-specific implementation that either call the time vDSO or route to gettimeofday vDSO are not removed. Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic CLOCK_REALTIME clockid. This takes less CPU time and its behavior better matches what the current glibc does. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Co-authored-by: Zack Weinberg <zackw@panix.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Change most internal uses of __gettimeofday to __clock_gettime.Zack Weinberg2019-10-301-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since gettimeofday will shortly be implemented in terms of clock_gettime on all platforms, internal code should use clock_gettime directly; in addition to removing a layer of indirection, this will allow us to remove the PLT-bypass gunk for gettimeofday. (We can't quite do that yet, but it'll be coming later in this patch series.) In many cases, the changed code does fewer conversions. The changed code always assumes __clock_gettime (CLOCK_REALTIME) cannot fail. Most of the call sites were assuming gettimeofday could not fail, but a few places were checking for errors. POSIX says clock_gettime can only fail if the clock constant is invalid or unsupported, and CLOCK_REALTIME is the one and only clock constant that's required to be supported. For consistency I grepped the entire source tree for any other places that checked for errors from __clock_gettime (CLOCK_REALTIME), found one, and changed it too. (For the record, POSIX also says gettimeofday can never fail.) (It would be nice if we could declare that GNU systems will always support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several places where we are using CLOCK_REALTIME where _MONOTONIC would be more appropriate, and/or trying to use _MONOTONIC and then falling back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet, and it looks like adding it would involve substantial changes to gnumach's internals and API. Oh well.) A few Hurd-specific files were changed to use __host_get_time instead of __clock_gettime, as this seemed tidier. We also assume this cannot fail. Skimming the code in gnumach leads me to believe the only way it could fail is if __mach_host_self also failed, and our Hurd-specific code consistently assumes that can't happen, so I'm going with that. With the exception of support/support_test_main.c, test cases are not modified, mainly because I didn't want to have to figure out which test cases were testing gettimeofday specifically. The definition of GETTIME in sysdeps/generic/memusage.h had a typo and was not reading tv_sec at all. I fixed this. It appears nobody has been generating malloc traces on a machine that doesn't have a superseding definition. There are a whole bunch of places where the code could be simplified by factoring out timespec subtraction and/or comparison logic, but I want to keep this patch as mechanical as possible. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Add nocancel version of pread64()Leandro Pereira2019-10-181-0/+2
| | | | | | | This is in preparation for changes in the dynamic linker so that pread() is used instead of lseek()+read(). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Fix small error in HP_TIMING_PRINT trailing null char settingChung-Lin Tang2019-09-171-1/+1
| | | | | | | | | | | Fix a small error in the HP_TIMING_PRINT trailing zero setting; the '\0' should be set at MIN(Len,string length), instead of always at the 'Len' position. * sysdeps/generic/hp-timing-common.h (HP_TIMING_PRINT): Correct position of string null termination. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07126-126/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* MIPS support for GNU hashMihailo Stojanovic2019-08-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a reimplementation of [1], which was submitted back in 2015. Copyright issue has been sorted [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering of the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word at the beggining of the section, which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue reported in [3] which is caused by the leading word of the .MIPS.xhash section. Leading word is now removed in the corresponding binutils patch, and the number of entries in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag. Since the MIPS specific dl-lookup.c file was removed following the initial patch submission, I opted for the definition of three new macros in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is used to calculate the index of a symbol in GNU hash. On MIPS, it is defined to look up the symbol index in the translation table. ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the .MIPS.xhash pointer in the link_map_machine struct. The other major change is bumping the highest EI_ABIVERSION value for MIPS to suggest that the dynamic linker now supports GNU hash. The patch was tested by running the glibc testsuite for the three MIPS ABIs (o32, n32 and n64) and for x86_64-linux-gnu. [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html * elf/dl-addr.c (determine_info): Calculate the symbol index using the newly defined ELF_MACHINE_HASH_SYMIDX macro. * elf/dl-lookup.c (do_lookup_x): Ditto. (_dl_setup_hash): Initialize MIPS xhash translation table. * elf/elf.h (SHT_MIPS_XHASH): New define. (DT_MIPS_XHASH): New define. * sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/linkmap.h (struct link_map_machine): New member. * sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI version. * sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
* Refactor sigcontextinfo.hAdhemerval Zanella2019-08-232-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
* Add RTLD_SINGLE_THREAD_P on generic single-thread.hAdhemerval Zanella2019-08-231-0/+1
| | | | | * sysdeps/generic/single-thread.h (RTLD_SINGLE_THREAD_P): Add definition.
* login: Assume that _HAVE_UT_* constants are trueFlorian Weimer2019-08-131-22/+12
| | | | | | Make the GNU version of bits/utmp.h the generic version because all remaining ports use it (with a sysdeps override for Linux s390/s390x).
* posix: Fix large mmap64 offset for mips64n32 (BZ#24699)Adhemerval Zanella2019-07-101-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | The fix for BZ#21270 (commit 158d5fa0e19) added a mask to avoid offset larger than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap, as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such x32, defines off_t being equal to off64_t). This leads to use the same mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum offset it can use with mmap64. This patch fixes by setting the high mask only for __NR_mmap2 usage. The posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The patch also change the test to check for an arch-specific header that defines the maximum supported offset. Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and mips64-n32-linux-gnu. [BZ #24699] * posix/tst-mmap-offset.c: Mention BZ #24699. (do_test_bz21270): Rename to do_test_large_offset and use mmap64_maximum_offset to check for maximum expected offset value. * sysdeps/generic/mmap_info.h: New file. * sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise. * sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff __NR_mmap2 is used.
* Add single-thread.h headerAdhemerval Zanella2019-05-141-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | This patch move the single-thread syscall optimization defintions from syscall-cancel.h to new header file single-thread.h and also move the cancellation definitions from pthreadP.h to syscall-cancel.h. The idea is just simplify the inclusion of both syscall-cancel.h and single-thread.h (without the requirement of including all pthreadP.h defintions). No semantic changes expected, checked on a build for all major ABIs. * nptl/pthreadP.h (CANCEL_ASYNC, CANCEL_RESET, LIBC_CANCEL_ASYNC, LIBC_CANCEL_RESET, __libc_enable_asynccancel, __libc_disable_asynccancel, __librt_enable_asynccancel, __libc_disable_asynccancel, __librt_enable_asynccancel, __librt_disable_asynccancel): Move to ... * sysdeps/unix/sysv/linux/sysdep-cancel.h: ... here. (SINGLE_THREAD_P, RTLD_SINGLE_THREAD_P): Move to ... * sysdeps/unix/sysv/linux/single-thread.h: ... here. * sysdeps/generic/single-thread.h: New file. * sysdeps/unix/sysdep.h: Include single-thread.h. * sysdeps/unix/sysv/linux/futex-internal.h: Include sysdep-cancel.h. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
* Add generic hp-timing supportWilco Dijkstra2019-03-221-9/+16
| | | | | | | | | | | | | | | | | Add missing generic hp_timing support. It uses clock_gettime (CLOCK_MONOTONIC) which has unspecified starting time, nano-second accuracy, and should faster on architectures that implementes the symbol as vDSO. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked the builds for all afected ABIs. * benchtests/Makefile (USE_CLOCK_GETTIME) Remove. * benchtests/README: Update description. * benchtests/bench-timing.h: Default to hp-timing. * sysdeps/generic/hp-timing.h (HP_TIMING_DIFF, HP_TIMING_ACCUM_NT, HP_TIMING_PRINT): Remove. (HP_TIMING_NOW): Add generic implementation. (hp_timing_t): Change to uint64_t.
* Refactor hp-timing rtld usageAdhemerval Zanella2019-03-222-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor how hp-timing is used on loader code for statistics report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and HP_TIMING_INLINE is used instead to check for hp-timing avaliability. For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE is set iff for IS_IN(rtld). Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked the builds for all afected ABIs. * benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with HP_TIMING_INLINE. * nptl/descr.h: Likewise. * elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF, RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define. (dl_start_final_info, _dl_start_final, dl_main, print_statistics): Abstract hp-timing usage with RTLD_* macros. * sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld). (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove. * sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL, HP_TIMING_NONAVAIL): Likewise. * sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/generic/hp-timing-common.h: Update comment with HP_TIMING_AVAIL removal.
* nptl: Remove pthread_clock_gettime pthread_clock_settimeAdhemerval Zanella2019-03-221-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support from clock_gettime and clock_settime generic implementation. For Linux, kernel already provides supports through the syscall and Hurd HTL lacks __pthread_clock_gettime and __pthread_clock_settime internal implementation. As described in clock_gettime man-page [1] on 'Historical note for SMP system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers is error-prone and susceptible to timing and accurary issues that the libc can not deal without kernel support. This allows removes unused code which, however, still incur in some runtime overhead in thread creation (the struct pthread cpuclock_offset initialization). If hurd eventually wants to support them it should either either implement as a kernel facility (or something related due its architecture) or in system specific implementation. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked on a i686-gnu build. * nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and pthread_clock_settime. * nptl/pthreadP.h (__find_thread_by_id): Remove prototype. * elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. (_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting. * elf/rtld.c (_dl_start_final): Likewise. * nptl/allocatestack.c (__find_thread_by_id): Remove function. * sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * nptl/descr.h (struct pthread): Rename cpuclock_offset to cpuclock_offset_ununsed. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove cpuclock_offset set. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * nptl/pthread_clock_gettime.c: Remove file. * nptl/pthread_clock_settime.c: Likewise. * sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function. [HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support. * sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise. [HP_TIMING_AVAIL] (realtime_gettime): Likewise. * sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise. [HP_TIMING_AVAIL] (__clock_getres): Likewise. * sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P): Likewise. (__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage. [1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-12-01 02:31:16 +0000