about summary refs log tree commit diff
path: root/sysdeps/arm
Commit message (Collapse)AuthorAgeFilesLines
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-032-2/+4
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01114-114/+114
|
* elf: Do not run IFUNC resolvers for LD_DEBUG=unused [BZ #24214]Florian Weimer2019-12-021-2/+4
| | | | | | | | | This commit adds missing skip_ifunc checks to aarch64, arm, i386, sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC resolvers do not run in various diagnostic modes of the dynamic loader. Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Add default pthread-offsets.hAdhemerval Zanella2019-11-261-7/+0
| | | | | | | | | | This patch adds a default pthread-offsets.h based on default thread definitions from struct_mutex.h and struct_rwlock.h. The idea is to simplify new ports inclusion. Checked with a build on affected abis. Change-Id: I7785a9581e651feb80d1413b9e03b5ac0452668a
* nptl: Add default pthreadtypes-arch.hAdhemerval Zanella2019-11-261-36/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch adds a default pthreadtypes-arch.h, the idea is to simpify new ports inclusion and an override is required only if the architecture adds some arch-specific extensions or requirement. The default values on the new generic header are based on current architecture define value and they are not optimal compared to current code requirements as below. - On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is sizeof (struct pthread_barrier) is 20 bytes. - On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while sizeof (struct pthread_attr) is 32. The default values are not changed so the generic header could be used by some architectures. Checked with a build on affected abis. Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
* nptl: Add struct_rwlock.hAdhemerval Zanella2019-11-261-26/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic __pthread_rwlock_arch_t definition meant to be used by new ports. Its layout mimics the current usage on some 64 bits ports and it allows some ports to use the generic definition. The arch __pthread_rwlock_arch_t definition is moved from pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h). Also the static intialization macro for pthread_rwlock_t is set to use an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its implementation. The default pthread_rwlock_t layout differs from current ports with: 1. Internal layout is the same for 32 bits and 64 bits. 2. Internal flag is an unsigned short so it should not required additional padding to align for word boundary (if it is the case for the ABI). Checked with a build on affected abis. Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
* nptl: Add struct_mutex.hAdhemerval Zanella2019-11-261-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current way of defining the common mutex definition for POSIX and C11 on pthreadtypes-arch.h (added by commit 06be6368da16104be5) is not really the best options for newer ports. It requires define some misleading flags that should be always defined as 0 (__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it exposes options used solely for linuxthreads compat mode (__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and requires newer ports to explicit define them (adding more boilerplate code). This patch adds a new default __pthread_mutex_s definition meant to be used by newer ports. Its layout mimics the current usage on both 32 and 64 bits ports and it allows most ports to use the generic definition. Only ports that use some arch-specific definition (such as hardware lock-elision or linuxthreads compat) requires specific headers. For 32 bit, the generic definitions mimic the other 32-bit ports of using an union to define the fields uses on adaptive and robust mutexes (thus not allowing both usage at same time) and by using a single linked-list for robust mutexes. Both decisions seemed to follow what recent ports have done and make the resulting pthread_mutex_t/mtx_t object smaller. Also the static intialization macro for pthread_mutex_t is set to use a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine in its struct_mutex.h if it requires additional fields to be initialized. Checked with a build on affected abis. Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
* nptl: Remove rwlock elision definitionsAdhemerval Zanella2019-11-261-2/+0
| | | | | | | | | | The new rwlock implementation added by cc25c8b4c1196 (2.25) removed support for lock-elision. This patch removes remaining the arch-specific unused definitions. Checked with a build against all affected ABIs. Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
* nptl: Add tests for internal pthread_rwlock_t offsetsAdhemerval Zanella2019-11-261-0/+6
| | | | | | | | | | | | | This patch new build tests to check for internal fields offsets for internal pthread_rwlock_t definition. Althoug the '__data.__flags' field layout should be preserved due static initializators, the patch also adds tests for the futexes that may be used in a shared memory (although using different libc version in such scenario is not really supported). Checked with a build against all affected ABIs. Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
* nptl: Cleanup mutex internal offset testsAdhemerval Zanella2019-11-261-4/+0
| | | | | | | | | | | | | The offsets of pthread_mutex_t __data.__nusers, __data.__spins, __data.elision, __data.list are not required to be constant over the releases. Only the __data.__kind is used for static initializers. This patch also adds an additional size check for __data.__kind. Checked with a build against affected ABIs. Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
* arm: Fix armv7 selection after 'Split BE/LE abilist'Adhemerval Zanella2019-11-255-0/+5
| | | | | | | | | | | | It adds the missing Implies for armv7, armv6, armv6t2 after the commit 1673ba87fefe019c. Without the Implies a build with the compiler targeting the aforementioned architecture does not select the arch-specific optimization including the ifunc selectors. I checked with a build against armv5, armv6, armv6t2, armv7, and armv7-neon for both LE and BE. For armv6 and armv7 I also checked that both sysdeps selection and the resulting implementation built is the expected ones.
* Split up endian.h to minimize exposure of BYTE_ORDER.Alistair Francis2019-10-013-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With only two exceptions (sys/types.h and sys/param.h, both of which historically might have defined BYTE_ORDER) the public headers that include <endian.h> only want to be able to test __BYTE_ORDER against __*_ENDIAN. This patch creates a new bits/endian.h that can be included by any header that wants to be able to test __BYTE_ORDER and/or __FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs __LONG_LONG_PAIR. It only defines macros in the implementation namespace. The existing bits/endian.h (which could not be included independently of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER) is renamed to bits/endianness.h. I also took the opportunity to canonicalize the form of this header, which we are stuck with having one copy of per architecture. Since they are so short, this means git doesn’t understand that they were renamed from existing headers, sigh. endian.h itself is a nonstandard header and its only remaining use from a standard header is guarded by __USE_MISC, so I dropped the __USE_MISC conditionals from around all of the public-namespace things it defines. (This means, an application that requests strict library conformance but includes endian.h will still see the definition of BYTE_ORDER.) A few changes to specific bits/endian(ness).h variants deserve mention: - sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did have selectable endianness, but we have assembly code in sysdeps/ia64 that assumes it’s little-endian, so there is no reason to treat the ia64 endianness.h as linux-specific. - The C-SKY port does not fully support big-endian mode, the compile will error out if __CSKYBE__ is defined. - The PowerPC port had extra logic in its bits/endian.h to detect a broken compiler, which strikes me as unnecessary, so I removed it. - The only files that defined __FLOAT_WORD_ORDER always defined it to the same value as __BYTE_ORDER, so I removed those definitions. The SH bits/endian(ness).h had comments inconsistent with the actual setting of __FLOAT_WORD_ORDER, which I also removed. - I *removed* copyright boilerplate from the few bits/endian(ness).h headers that had it; these files record a single fact in a fashion dictated by an external spec, so I do not think they are copyrightable. As long as I was changing every copy of ieee754.h in the tree, I noticed that only the MIPS variant includes float.h, because it uses LDBL_MANT_DIG to decide among three different versions of ieee854_long_double. This patch makes it not include float.h when GCC’s intrinsic __LDBL_MANT_DIG__ is available. * string/endian.h: Unconditionally define LITTLE_ENDIAN, BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping macros only on !__ASSEMBLER__. Move the definitions of __BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER, and __LONG_LONG_PAIR to... * string/bits/endian.h: ...this new file, which includes the renamed header bits/endianness.h for the definition of __BYTE_ORDER and possibly __FLOAT_WORD_ORDER. * string/Makefile: Install bits/endianness.h. * include/bits/endian.h: New wrapper. * bits/endian.h: Rename to bits/endianness.h. Add multiple-include guard. Rewrite the comment explaining what the machine-specific variants of this file should do. * sysdeps/unix/sysv/linux/ia64/bits/endian.h: Move to sysdeps/ia64. * sysdeps/aarch64/bits/endian.h * sysdeps/alpha/bits/endian.h * sysdeps/arm/bits/endian.h * sysdeps/csky/bits/endian.h * sysdeps/hppa/bits/endian.h * sysdeps/ia64/bits/endian.h * sysdeps/m68k/bits/endian.h * sysdeps/microblaze/bits/endian.h * sysdeps/mips/bits/endian.h * sysdeps/nios2/bits/endian.h * sysdeps/powerpc/bits/endian.h * sysdeps/riscv/bits/endian.h * sysdeps/s390/bits/endian.h * sysdeps/sh/bits/endian.h * sysdeps/sparc/bits/endian.h * sysdeps/x86/bits/endian.h: Rename to endianness.h; canonicalize form of file; remove redundant definitions of __FLOAT_WORD_ORDER. * sysdeps/powerpc/bits/endianness.h: Remove logic to check for broken compilers. * ctype/ctype.h * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h * sysdeps/arm/nptl/bits/pthreadtypes-arch.h * sysdeps/csky/nptl/bits/pthreadtypes-arch.h * sysdeps/ia64/ieee754.h * sysdeps/ieee754/ieee754.h * sysdeps/ieee754/ldbl-128/ieee754.h * sysdeps/ieee754/ldbl-128ibm/ieee754.h * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h * sysdeps/mips/ieee754/ieee754.h * sysdeps/mips/nptl/bits/pthreadtypes-arch.h * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h * sysdeps/nptl/pthread.h * sysdeps/riscv/nptl/bits/pthreadtypes-arch.h * sysdeps/sh/nptl/bits/pthreadtypes-arch.h * sysdeps/sparc/sparc32/ieee754.h * sysdeps/unix/sysv/linux/generic/bits/stat.h * sysdeps/unix/sysv/linux/generic/bits/statfs.h * sysdeps/unix/sysv/linux/sys/acct.h * wctype/bits/wctype-wchar.h: Include bits/endian.h, not endian.h. * sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h. * sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__ in ifdefs, instead of LDBL_MANT_DIG. Only include float.h when __LDBL_MANT_DIG__ is not predefined, in which case define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07115-115/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* arm: Split BE/LE abilistAdhemerval Zanella2019-08-297-2/+160
| | | | | | | | | | | | | | | | | | | | | The fix for BZ#18231 requires new symbols only for armeb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf. * sysdeps/arm/preconfigure.ac: Set machine based on endianness. * sysdeps/arm/preconfigure: Regenerate. * sysdeps/arm/be/Implies: New file. * sysdeps/arm/be/armv6/Implies: Likewise. * sysdeps/arm/be/armv6t2/Implies: Likewise. * sysdeps/arm/be/armv7/Implies: Likewise. * sysdeps/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/be/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/*.abilist: Move to sysdeps/unix/sysv/linux/arm/le/*.abilist. * sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
* Break further lines before not after operators.Joseph Myers2019-02-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the process of fixing coding style to break lines before not after operators in accordance with the GNU Coding Standards, fixing such issues in a non-exhaustive selection of sysdeps files that had them. Tested for x86_64, and with build-many-glibcs.py. * sysdeps/arm/sysdep.h (#if condition): Break lines before rather than after operators. * sysdeps/mach/hurd/fork.c (__fork): Likewise. * sysdeps/mach/hurd/getcwd.c (__hurd_canonicalize_directory_name_internal): Likewise. * sysdeps/mach/hurd/htl/pt-mutex-consistent.c (pthread_mutex_consistent): Likewise. * sysdeps/mach/hurd/htl/pt-mutex-init.c (_pthread_mutex_init): Likewise. * sysdeps/mach/hurd/htl/pt-mutex-transfer-np.c (__pthread_mutex_transfer_np): Likewise. * sysdeps/mach/hurd/htl/pt-mutex-unlock.c (__pthread_mutex_unlock): Likewise. * sysdeps/mach/hurd/htl/pt-mutex.h (ROBUST_LOCK): Likewise. (mtx_owned_p): Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getrobust.c (pthread_mutexattr_getrobust): Likewise. * sysdeps/mach/hurd/i386/init-first.c (init1): Likewise. * sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Likewise. * sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise. * sysdeps/mach/hurd/jmp-unwind.c (_longjmp_unwind): Likewise. * sysdeps/mach/hurd/kill.c (__kill): Likewise. * sysdeps/mach/hurd/mig-reply.c (__mig_get_reply_port): Likewise. * sysdeps/mach/hurd/ptrace.c (ptrace): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h (#if condition): Likewise. * sysdeps/unix/sysv/linux/alpha/ioperm.c (process_cpuinfo): Likewise. * sysdeps/unix/sysv/linux/bits/timex.h (STA_RONLY): Likewise. * sysdeps/unix/sysv/linux/csky/sysdep.h (#if condition): Likewise. * sysdeps/unix/sysv/linux/generic/____longjmp_chk.c (____longjmp_chk): Likewise. * sysdeps/unix/sysv/linux/generic/futimesat.c (futimesat): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (INTERNAL_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (INTERNAL_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c (__get_clockfreq_via_cpuinfo): Likewise.
* arm: Use "nr" constraint for Systemtap probes [BZ #24164]Florian Weimer2019-02-051-0/+22
| | | | | | | With the default "nor" constraint, current GCC will use the "o" constraint for constants, after emitting the constant to memory. That results in unparseable Systemtap probe notes such as "-4@.L1052". Removing the "o" alternative and using "nr" instead avoids this.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-01114-114/+114
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Fix armv7 build with GCC 9.Joseph Myers2018-11-121-1/+2
| | | | | | | | | | | | | | | | | | | Similar to the x86_64 build issues, glibc fails to build for armv7 with current mainline GCC because of aliases declared in the course of defining IFUNCs, which copy their attributes from a header declaration, ending up with fewer attributes than the (built-in) string function they alias: the relevant attributes (nonnull, leaf) are present on the header declaration, but elided therefrom when glibc itself if being built (whatever the reasons are for disabling the nonnull and leaf attributes in that case, and whether or not those reasons are actually still valid). This patch fixes the issue similarly to the x86_64 fix, by adding an addition __attribute_copy__ use (in this case, on the definition of arm_libc_ifunc_hidden_def). Tested with build-many-glibcs.py build for armeb-linux-gnueabi-be8. * sysdeps/arm/arm-ifunc.h [SHARED] (arm_libc_ifunc_hidden_def): Use __attribute_copy__ to copy attributes from name.
* Add new exp and exp2 implementationsSzabolcs Nagy2018-09-051-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimized exp and exp2 implementations using a lookup table for fractional powers of 2. There are several variants, see e_exp_data.c, they can be selected by modifying math_config.h allowing different tradeoffs. The default selection should be acceptable as generic libm code. Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on aarch64 the rodata size is 2160 bytes, shared between exp and exp2. On aarch64 .text + .rodata size decreased by 24912 bytes. The non-nearest rounding error is less than 1 ULP even on targets without efficient round implementation (although the error rate is higher in that case). Targets with single instruction, rounding mode independent, to nearest integer rounding and conversion can use them by setting TOINT_INTRINSICS and adding the necessary code to their math_private.h. The __exp1 code uses the same algorithm, so the error bound of pow increased a bit. New double precision error handling code was added following the style of the single precision error handling code. Improvements on Cortex-A72 compared to current glibc master: exp thruput: 1.61x in [-9.9 9.9] exp latency: 1.53x in [-9.9 9.9] exp thruput: 1.13x in [0.5 1] exp latency: 1.30x in [0.5 1] exp2 thruput: 2.03x in [-9.9 9.9] exp2 latency: 1.64x in [-9.9 9.9] For small (< 1) inputs the current exp code uses a separate algorithm so the speed up there is less. Was tested on aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets, only non-nearest rounding ulp errors increase and they are within acceptable bounds (ulp updates are in separate patches). * NEWS: Mention exp and exp2 improvements. * math/Makefile (libm-support): Remove t_exp. (type-double-routines): Add math_err and e_exp_data. * sysdeps/aarch64/libm-test-ulps: Update. * sysdeps/arm/libm-test-ulps: Update. * sysdeps/i386/fpu/e_exp_data.c: New file. * sysdeps/i386/fpu/math_err.c: New file. * sysdeps/i386/fpu/t_exp.c: Remove. * sysdeps/ia64/fpu/e_exp_data.c: New file. * sysdeps/ia64/fpu/math_err.c: New file. * sysdeps/ia64/fpu/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/e_exp.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp_data.c: New file. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound. * sysdeps/ieee754/dbl-64/eexp.tbl: Remove. * sysdeps/ieee754/dbl-64/math_config.h: New file. * sysdeps/ieee754/dbl-64/math_err.c: New file. * sysdeps/ieee754/dbl-64/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/t_exp2.h: Remove. * sysdeps/ieee754/dbl-64/uexp.h: Remove. * sysdeps/ieee754/dbl-64/uexp.tbl: Remove. * sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_err.c: New file. * sysdeps/m68k/m680x0/fpu/t_exp.c: Remove. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* [BZ #20271] Add newlines in __libc_fatal calls.Paul Pluzhnikov2018-08-311-1/+1
|
* Split fenv_private.h out of math_private.h more consistently.Joseph Myers2018-08-282-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some architectures, the parts of math_private.h relating to the floating-point environment are in a separate file fenv_private.h included from math_private.h. As this is purely an architecture-specific convention used by several architectures, however, all such architectures still need their own math_private.h, even if it has nothing to do beyond #include <fenv_private.h> and peculiarity of including the i386 file directly instead of having a shared file in sysdeps/x86. This patch makes the fenv_private.h name an architecture-independent convention in glibc. The include of fenv_private.h from math_private.h becomes architecture-independent (until callers are updated to include fenv_private.h directly so the include from math_private.h is no longer needed). Some architecture math_private.h headers are removed if no longer needed, or renamed to fenv_private.h if all they define belongs in that header; architecture fenv_private.h headers now do require #include_next <fenv_private.h>. The i386 fenv_private.h file moves to sysdeps/x86/fpu/ to reflect how it is actually shared with x86_64. The generic math_private.h gets a new include of <stdbool.h>, as needed for bool in some prototypes in that header (previously that was indirectly included via include/fenv.h, which now only gets included too late in math_private.h, after those prototypes). Tested for x86_64 and x86, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/aarch64/fpu/fenv_private.h: New file. Based on .... * sysdeps/aarch64/fpu/math_private.h: ... this file. All contents moved to fenv_private.h except for ... (TOINT_INTRINSICS): Kept in math_private.h. (roundtoint): Likewise. (converttoint): Likewise. * sysdeps/arm/fenv_private.h: Change multiple-include guard to [ARM_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/arm/math_private.h: Remove. * sysdeps/generic/fenv_private.h: New file. Contents moved from .... * sysdeps/generic/math_private.h: ... this file. Include <stdbool.h>. Do not include <fenv.h> or <get-rounding-mode.h>. Include <fenv_private.h>. Remove functions and macros moved to fenv_private.h. * sysdeps/i386/fpu/math_private.h: Remove. * sysdeps/mips/math_private.h: Move to .... * sysdeps/mips/fpu/fenv_private.h: ... here. Change multiple-include guard to [MIPS_FENV_PRIVATE_H]. Remove [__mips_hard_float] conditional. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/fenv_private.h: Change multiple-include guard to [POWERPC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/powerpc/fpu/math_private.h: Do not include <fenv_private.h>. * sysdeps/riscv/rvf/math_private.h: Move to .... * sysdeps/riscv/rvf/fenv_private.h: ... here. Change multiple-include guard to [RISCV_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/fenv_private.h: Change multiple-include guard to [SPARC_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/sparc/fpu/math_private.h: Remove. * sysdeps/i386/fpu/fenv_private.h: Move to .... * sysdeps/x86/fpu/fenv_private.h: ... here. Change multiple-include guard to [X86_FENV_PRIVATE_H]. Include next <fenv_private.h>. * sysdeps/x86_64/fpu/math_private.h: Do not include <sysdeps/i386/fpu/fenv_private.h>.
* Move EXCEPTION_ENABLE_SUPPORTED out of math-tests.h.Joseph Myers2018-08-241-3/+7
| | | | | | | | | | | | | | | | | | | Continuing moving macros out of math-tests.h to smaller headers following typo-proof conventions instead of using #ifndef, this patch moves the EXCEPTION_ENABLE_SUPPORTED macro out to its own math-tests-trap.h header. Tested with build-many-glibcs.py. * sysdeps/generic/math-tests-trap.h: New file. * sysdeps/generic/math-tests.h: Include <math-tests-trap.h>. (EXCEPTION_ENABLE_SUPPORTED): Do not define here. * sysdeps/aarch64/math-tests.h: Remove file. * sysdeps/arm/math-tests.h: Likewise. * sysdeps/riscv/math-tests.h: Likewise. * sysdeps/aarch64/math-tests-trap.h: New file. * sysdeps/arm/math-tests-trap.h: Likewise. * sysdeps/riscv/math-tests-trap.h: Likewise.
* Move EXCEPTION_TESTS_* out of math-tests.hJoseph Myers2018-08-232-10/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing moving macros out of math-tests.h to smaller headers following typo-proof conventions instead of using #ifndef, this patch moves the EXCEPTION_TESTS_* macros for individual types out to their own sysdeps header. As with ROUNDING_TESTS_*, there is no need to define these macros if FE_ALL_EXCEPT == 0 and the individual exception macros are undefined; thus, math-tests-exceptions.h headers are only needed for soft-float ARM and RISC-V, while the other cases that defined these macros do not need to do so (and the associated math-tests.h headers are thus removed without needing replacement by math-tests-exceptions.h headers). Tested with build-many-glibcs.py. * sysdeps/generic/math-tests-exceptions.h: New file. * sysdeps/generic/math-tests.h: Include <math-tests-exceptions.h>. (EXCEPTION_TESTS_float): Do not define here. (EXCEPTION_TESTS_double): Likewise. (EXCEPTION_TESTS_long_double): Likewise. (EXCEPTION_TESTS_float128): Likewise. * sysdeps/arm/math-tests.h [__SOFTFP__] (EXCEPTION_TESTS_float): Likewise. [__SOFTFP__] (EXCEPTION_TESTS_double): Likewise. [__SOFTFP__] (EXCEPTION_TESTS_long_double): Likewise. * sysdeps/arm/nofpu/math-tests-exceptions.h: New file. * sysdeps/m68k/coldfire/math-tests.h: Remove file. * sysdeps/mips/math-tests.h: Likewise. * sysdeps/nios2/math-tests.h: Likewise. * sysdeps/riscv/math-tests.h [!__riscv_flen] (EXCEPTION_TESTS_float): Do not define here. [!__riscv_flen] (EXCEPTION_TESTS_double): Likewise. [!__riscv_flen] (EXCEPTION_TESTS_long_double): Likewise. * sysdeps/riscv/nofpu/math-tests-exceptions.h: New file.
* Move ROUNDING_TESTS_* out of math-tests.h.Joseph Myers2018-08-222-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing moving macros out of math-tests.h to smaller headers following typo-proof conventions instead of using #ifndef, this patch moves the ROUNDING_TESTS_* macros for individual types out to their own sysdeps header. In the soft-float case where FE_TONEAREST is the only rounding mode macro defined, there is no need to define ROUNDING_TESTS_*; it is only necessary when rounding modes macros are defined that may not be supported at runtime. Thus, the ROUNDING_TESTS_* definitions for some configurations are just removed, not moved to new math-tests-rounding.h headers; the only architectures needing math-tests-rounding.h are those where the macros are defined in bits/fenv.h because of the possibility of a soft-float compilation using a hard-float glibc with the same ABI (i.e., ARM and RISC-V). The test-*-vlen*.h headers, by using #undef, do not yet follow typo-proof conventions (but they no longer implicitly rely on being included before math-tests.h, and this area can always be cleaned up further in future). Tested with build-many-glibcs.py. * sysdeps/generic/math-tests-rounding.h: New file. * sysdeps/generic/math-tests.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_float): Do not define here. (ROUNDING_TESTS_double): Likewise. (ROUNDING_TESTS_long_double): Likewise. (ROUNDING_TESTS_float128): Likewise. * math/test-double-vlen2.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_double): Undefine before defining. * math/test-double-vlen4.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_double): Undefine before defining. * math/test-double-vlen8.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_double): Undefine before defining. * math/test-float-vlen16.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_float): Undefine before defining. * math/test-float-vlen4.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_float): Undefine before defining. * math/test-float-vlen8.h: Include <math-tests-rounding.h>. (ROUNDING_TESTS_float): Undefine before defining. * sysdeps/arm/nofpu/math-tests-rounding.h: New file. * sysdeps/arm/math-tests.h [__SOFTFP__] (ROUNDING_TESTS_float): Do not define here. [__SOFTFP__] (ROUNDING_TESTS_double): Likewise. [__SOFTFP__] (ROUNDING_TESTS_long_double): Likewise. * sysdeps/riscv/nofpu/math-tests-rounding.h: New file. * sysdeps/riscv/math-tests.h [!__riscv_flen] (ROUNDING_TESTS_float): Do not define here. [!__riscv_flen] (ROUNDING_TESTS_double): Likewise. [!__risv_flen] (ROUNDING_TESTS_long_double): Likewise. * sysdeps/m68k/coldfire/math-tests.h [!__mcffpu__] (ROUNDING_TESTS_float): Likewise. [!__mcffpu__] (ROUNDING_TESTS_double): Likewise. [!__mcffpu__] (ROUNDING_TESTS_long_double): Likewise. * sysdeps/mips/math-tests.h [__mips_soft_float] (ROUNDING_TESTS_float): Likewise. [__mips_soft_float] (ROUNDING_TESTS_double): Likewise. [__mips_soft_float] (ROUNDING_TESTS_long_double): Likewise. * sysdeps/nios2/math-tests.h (ROUNDING_TESTS_float): Likewise. (ROUNDING_TESTS_double): Likewise. (ROUNDING_TESTS_long_double): Likewise.
* Mark _init and _fini as hidden [BZ #23145]H.J. Lu2018-06-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _init and _fini are special functions provided by glibc for linker to define DT_INIT and DT_FINI in executable and shared library. They should never be put in dynamic symbol table. This patch marks them as hidden to remove them from dynamic symbol table. Tested with build-many-glibcs.py. [BZ #23145] * elf/Makefile (tests-special): Add $(objpfx)check-initfini.out. ($(all-built-dso:=.dynsym): New target. (common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym). ($(objpfx)check-initfini.out): New target. (generated): Add check-initfini.out. * scripts/check-initfini.awk: New file. * sysdeps/aarch64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/alpha/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/arm/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/hppa/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/i386/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/ia64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/m68k/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/microblaze/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/nios2/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/s390/s390-32/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/s390/s390-64/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/sh/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/sparc/crti.S (_init): Mark as hidden. (_fini): Likewise. * sysdeps/x86_64/crti.S (_init): Mark as hidden. (_fini): Likewise.
* Drop fpregset unused symbol expositionSamuel Thibault2018-04-201-1/+1
| | | | | | | | | * sysdeps/arm/sys/ucontext.h: Remove fpregset struct name, unused and non-compliant. * sysdeps/i386/sys/ucontext.h: Likewise. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise.
* arm: Remove ununsed ARM code in optimized implementationAdhemerval Zanella2018-04-164-86/+1
| | | | | | | | | | | | | | | | | This patch removes the ununsed ARM code path for armv6t2 memchr and strlen and armv7 memch and strcmp. In all implementation, the ARM code is not used in any possible build (unless glibc is explicit build with the non-documented NO_THUMB compiler flag) and for armv7 the resulting code either produces wrong results (memchr) and throw build error (strcmp). Checked on arm-linux-gnueabihf built targeting both armv6 and armv7. * sysdeps/arm/armv6t2/memchr.S (memchr): Remove ARM code path. * sysdeps/arm/armv6t2/strlen.S (memchr): Likewise. * sysdeps/arm/armv7/multiarch/memchr_neon.S (memchr): Likewise. * sysdeps/arm/armv7/strcmp.S (strcmp): Likewise.
* Update ARM libm-test-ulps.Adhemerval Zanella2018-04-051-0/+8
| | | | * sysdeps/arm/libm-test-ulps: Update.
* elf: Unify symbol address run-time calculation [BZ #19818]Maciej W. Rozycki2018-04-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap symbol address run-time calculation into a macro and use it throughout, replacing inline calculations. There are a couple of variants, most of them different in a functionally insignificant way. Most calculations are right following RESOLVE_MAP, at which point either the map or the symbol returned can be checked for validity as the macro sets either both or neither. In some places both the symbol and the map has to be checked however. My initial implementation therefore always checked both, however that resulted in code larger by as much as 0.3%, as many places know from elsewhere that no check is needed. I have decided the size growth was unacceptable. Having looked closer I realized that it's the map that is the culprit. Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional boolean argument telling it to access the map without checking it for validity. This in turn has brought quite nice results, with new code actually being smaller for i686, and MIPS o32, n32 and little-endian n64 targets, unchanged in size for x86-64 and, unusually, marginally larger for big-endian MIPS n64, as follows: i686: text data bss dec hex filename 152255 4052 192 156499 26353 ld-2.27.9000-base.so 152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so MIPS/o32/el: text data bss dec hex filename 142906 4396 260 147562 2406a ld-2.27.9000-base.so 142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so MIPS/n32/el: text data bss dec hex filename 142267 4404 260 146931 23df3 ld-2.27.9000-base.so 142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so MIPS/n64/el: text data bss dec hex filename 149835 7376 408 157619 267b3 ld-2.27.9000-base.so 149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so MIPS/o32/eb: text data bss dec hex filename 142870 4396 260 147526 24046 ld-2.27.9000-base.so 142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so MIPS/n32/eb: text data bss dec hex filename 142019 4404 260 146683 23cfb ld-2.27.9000-base.so 141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so MIPS/n64/eb: text data bss dec hex filename 149763 7376 408 157547 2676b ld-2.27.9000-base.so 149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so x86-64: text data bss dec hex filename 148462 6452 400 155314 25eb2 ld-2.27.9000-base.so 148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so [BZ #19818] * sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set' parameter. (SYMBOL_ADDRESS): New macro. [!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use SYMBOL_ADDRESS for symbol address calculation. * elf/dl-runtime.c (_dl_fixup): Likewise. (_dl_profile_fixup): Likewise. * elf/dl-symaddr.c (_dl_symbol_address): Likewise. * elf/rtld.c (dl_main): Likewise. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. (elf_machine_reloc): Likewise. (elf_machine_got_rel): Likewise. * sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Remove unused frame.h header, sigcontextinfo.h macros.Joseph Myers2018-03-221-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc-internal header frame.h was used in the old debug/backtrace.c but is now unused. Similarly, there are some sigcontextinfo.h macros that are used nowhere in glibc - ADVANCE_STACK_FRAME and FIRST_FRAME_POINTER were used in the old debug/backtrace.c, while SIGCONTEXT_EXTRA_ARGS, GET_FRAME, GET_STACK and CALL_SIGHANDLER were unused even before the removal of that old implementation (beyond uses of SIGCONTEXT_EXTRA_ARGS in definitions of CALL_SIGHANDLER). This patch removes all the unused frame.h headers and definitions of those macros. Tested with build-many-glibcs.py. * sysdeps/generic/frame.h: Remove file. * sysdeps/arm/frame.h: Likewise. * sysdeps/hppa/frame.h: Likewise. * sysdeps/generic/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Remove macro. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/mach/hurd/i386/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (ADVANCE_STACK_FRAME): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (FIRST_FRAME_POINTER): Likewise. (ADVANCE_STACK_FRAME): Likewise. (GET_STACK): Likewise. (GET_FRAME): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (ADVANCE_STACK_FRAME): Likewise. (GET_STACK): Likewise. (GET_FRAME): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT_EXTRA_ARGS): Likewise. (GET_FRAME): Likewise. (GET_STACK): Likewise. (CALL_SIGHANDLER): Likewise.
* hurd: add gscope supportSamuel Thibault2018-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* Move LDBL_CLASSIFY_COMPAT to its own header.Joseph Myers2018-02-012-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The general rule in glibc is that it's better for a macro to be always defined, and tested with #if, than for it to be tested with #ifdef, because the latter is prone to typos in the macro name as well as to the header with the macro accidentally not being included in a file testing it. (Testing with an "if" statement is even better, in those cases where it's possible to do things that way, as it then means both cases in the code get checked for syntax in glibc builds with either value of the condition.) math_private.h has several different groups of macros, meaning that architectures wanting to override some of them need to define those then include the generic version, which then defines macros if not already defined. It's hard to avoid that arrangement completely, but various cases can be improved by splitting out macros or groups of macros into separate files. This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate ldbl-classify-compat.h header. This macro is tested with #ifdef; this patch changes it to testing with #if, with a default definition to 0 in the generic header and then architecture-specific headers defining it to 1. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/generic/ldbl-classify-compat.h: New file. * sysdeps/arm/ldbl-classify-compat.h: Likewise. * sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise. * sysdeps/microblaze/ldbl-classify-compat.h: Likewise. * sysdeps/mips/ldbl-classify-compat.h: Likewise. * sysdeps/nios2/ldbl-classify-compat.h: Likewise. * sysdeps/sh/ldbl-classify-compat.h: Likewise. * sysdeps/ieee754/dbl-64/s_finite.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/s_isinf.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/s_isnan.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro. * sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise. * sysdeps/m68k/coldfire/math_private.h: Remove file. * sysdeps/microblaze/math_private.h: Likewise. * sysdeps/nios2/math_private.h: Likewise. * sysdeps/sh/math_private.h: Likewise.
* Update ARM libm-test-ulps.Joseph Myers2018-01-021-26/+26
| | | | * sysdeps/arm/libm-test-ulps: Update.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-01113-113/+113
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Add sysdeps/ieee754/soft-fp.Joseph Myers2017-12-125-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default sysdeps/ieee754 fma implementations rely on exceptions and rounding modes to achieve correct results through internal use of round-to-odd. Thus, glibc configurations without support for exceptions and rounding modes instead need to use implementations of fma based on soft-fp. At present, this is achieved via having implementation files in soft-fp/ that are #included by sysdeps files for each glibc configuration that needs them. In general this means such a configuration has its own s_fma.c and s_fmaf.c. TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on arguments wider than the return type, with a single rounding of the infinite-precision result to that return type. These are also naturally implemented using round-to-odd on platforms with hardware support for rounding modes and exceptions but lacking hardware support for these narrowing operations themselves. (Platforms that have direct hardware support for such narrowing operations include at least ia64, and Power ISA 2.07 or later, which I think means POWER8 or later.) So adding the remaining TS 18661-1 functions would mean at least six narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt), with aliases for other types and further implementations in some configurations, that need to be overridden for configurations lacking hardware exceptions and rounding modes. Requiring all such configurations (currently seven of them) to have their own source files for all those functions seems undesirable. Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain libm function implementations based on soft-fp. This directory is then used via Implies from all the configurations that need it, so no more files need adding to every such configuration when adding more functions with soft-fp implementations. A configuration can still selectively #include a particular file from this directory if desired; thus, the MIPS #include of the fmal implementation is retained, since that's appropriate even for hard float (because long double is always implementated in software for MIPS64, so the soft-fp implementation of fmal is better than the ldbl-128 one). This also provides additional motivation for my recent patch removing --with-fp / --without-fp: previously there was no need for correct use of --without-fp for no-FPU ARM or SH3, and now we have autodetection nofpu/ sysdeps directories can be used by this patch for those configurations without imposing any new requirements on how glibc is configured. (The mips64/*/fpu/s_fma.c files added by this patch are needed to keep the dbl-64 version of fma for double, rather than the ldbl-128 one, used in that case.) Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * soft-fp/fmadf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fma.c: ... here. * soft-fp/fmasf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmaf.c: ... here. * soft-fp/fmatf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmal.c: ... here. * sysdeps/ieee754/soft-fp/Makefile: New file. * sysdeps/arm/preconfigure.ac: Define with_fp_cond. * sysdeps/arm/preconfigure: Regenerated. * sysdeps/arm/nofpu/Implies: New file. * sysdeps/arm/s_fma.c: Remove file. * sysdeps/arm/s_fmaf.c: Likewise. * sysdeps/m68k/coldfire/nofpu/Implies: New file. * sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file. * sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise. * sysdeps/microblaze/Implies: Add ieee754/soft-fp. * sysdeps/microblaze/s_fma.c: Remove file. * sysdeps/microblaze/s_fmaf.c: Likewise. * sysdeps/mips/mips32/nofpu/Implies: New file. * sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n32/nofpu/Implies: Likewise. * sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n64/nofpu/Implies: Likewise. * sysdeps/mips/ieee754/s_fma.c: Remove file. * sysdeps/mips/ieee754/s_fmaf.c: Likewise. * sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal implementation. * sysdeps/nios2/Implies: Add ieee754/soft-fp. * sysdeps/nios2/s_fma.c: Remove file. * sysdeps/nios2/s_fmaf.c: Likewise. * sysdeps/sh/nofpu/Implies: New file. * sysdeps/sh/s_fma.c: Remove file. * sysdeps/sh/s_fmaf.c: Likewise. * sysdeps/tile/Implies: Add ieee754/soft-fp. * sysdeps/tile/s_fma.c: Remove file. * sysdeps/tile/s_fmaf.c: Likewise.
* Prefer https for Sourceware linksSiddhesh Poyarekar2017-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Update all sourceware links to https. The website redirects everything to https anyway so let the web server do a bit less work. The only reference that remains unchanged is the one in the old ChangeLog, since it didn't seem worth changing it. * NEWS: Update sourceware link to https. * configure.ac: Likewise. * crypt/md5test-giant.c: Likewise. * dlfcn/bug-atexit1.c: Likewise. * dlfcn/bug-atexit2.c: Likewise. * localedata/README: Likewise. * malloc/tst-mallocfork.c: Likewise. * manual/install.texi: Likewise. * nptl/tst-pthread-getattr.c: Likewise. * stdio-common/tst-fgets.c: Likewise. * stdio-common/tst-fwrite.c: Likewise. * sunrpc/Makefile: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise. * wcsmbs/tst-mbrtowc2.c: Likewise. * configure: Regenerate. * INSTALL: Regenerate.
* nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}Adhemerval Zanella2017-11-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two new internal defines to set the internal pthread_mutex_t layout required by the supported ABIS: 1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define __nusers fields before or after __kind. The preferred value for is 0 for new ports and it sets __nusers before __kind. 2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and __list members will be place inside an union for linuxthreads compatibility. The preferred value is 0 for ports and it sets to not use an union to define both fields. It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32. Checked with a make check run-built-tests=no on all afected ABIs. [BZ #22298] * nptl/allocatestack.c (allocate_stack): Check if __PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if __PTHREAD_MUTEX_HAVE_PREV is defined. * nptl/descr.h (pthread): Likewise. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. (__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE for internal layout. (__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE whether to use an union for __spins and __list fields. (__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION case. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add tests for internal pthread_mutex_t offsetsAdhemerval Zanella2017-11-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* arm: Implement memchr ifunc selection in CAdhemerval Zanella2017-11-068-285/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor ARM memchr ifunc selector to a C implementation. No functional change is expected, including ifunc resolution rules. It also reorganize the ifunc options code: 1. The memchr_impl.S is renamed to memchr_neon.S and multiple compilation options (which route to armv6t2/memchr one) is removed. The code to build if __ARM_NEON__ is defined is also simplified. 2. A memchr_noneon is added (which as build along previous ifunc resolution) and includes the armv6t2 direct. 3. Same as 2. for loader object. Alongside the aforementioned changes, it also some cleanus: - Internal memchr definition (__GI_memcpy) is now a hidden symbol. - No need to create hidden definition for the ifunc variants. Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi, arm-linux-gnueabihf with and without multiarch support and with both GCC 7.1 and GCC mainline. * sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string] (sysdeps_routines): Add memchr_noneon. * sysdeps/arm/armv7/multiarch/ifunc-memchr.h: New file. * sysdeps/arm/armv7/multiarch/memchr_noneon.S: Likewise. * sysdeps/arm/armv7/multiarch/rtld-memchr.S: Likewise. * sysdeps/arm/armv7/multiarch/memchr.S: Remove file. * sysdeps/arm/armv7/multiarch/memchr.c: New file. * sysdeps/arm/armv7/multiarch/memchr_impl.S: Move to ... * sysdeps/arm/armv7/multiarch/memchr_neon.S: ... here. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* arm: Implement memcpy ifunc selection in CAdhemerval Zanella2017-11-069-82/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor ARM memcpy ifunc selector to a C implementation. No functional change is expected, including ifunc resolution rules. It also adds some cleanup: - Internal memcpy hidden definition (__GI_memcpy) is now a hidden symbol. - No need to create hidden definition for the ifunc variants. Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi, arm-linux-gnueabihf with and without multiarch support and with both GCC 7.1 and GCC mainline. I also checked with the some possible multiarch different configurations that trigger different memcpy buids (__ARM_NEON__ && !__SOFT_FP__, !__ARM_NEON__ && !__SOFT_FP__, and !__ARM_NEON__ && __SOFT_FP__). * sysdeps/arm/arm-ifunc.h: New file. * sysdeps/arm/armv7/multiarch/ifunc-memcpy.h: Likewise. * sysdeps/arm/armv7/multiarch/memcpy.c: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_arm.S: Likewise. * sysdeps/arm/armv7/multiarch/rtld-memcpy.S: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_neon.S [!__ARM_NEON__] (__memcpy_neon): Avoid create hidden alias. * sysdeps/arm/armv7/multiarch/memcpy_vfp.S [!__ARM_NEON_] (__memcpy_vfp): Likewise. * sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string] (sysdep_routines): Add memcpy_arm. * sysdeps/arm/armv7/multiarch/memcpy.S: Remove file. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* arm: Remove lazy tlsdesc initialization related codeSzabolcs Nagy2017-11-034-209/+2
| | | | | | | | | | | | | | Lazy tlsdesc initialization is no longer used in the dynamic linker so all related code can be removed. * sysdeps/arm/dl-machine.h (elf_machine_runtime_setup): Remove DT_TLSDESC_GOT initialization. * sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_lazy_resolver): Remove. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_lazy_resolver): Remove. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_lazy_resolver_fixup): Remove. (_dl_tlsdesc_resolve_hold_fixup): Likewise.
* arm: Remove unnecessary volatile qualifierSzabolcs Nagy2017-11-031-2/+1
| | | | | | There is no reason to treat tlsdesc entries as volatile objects. * sysdeps/arm/dl-machine.h (elf_machine_rel): Remove volatile.
* [BZ #18572] arm: Disable lazy initialization of tlsdesc entriesSzabolcs Nagy2017-11-031-9/+15
| | | | | | | | | | | | | | | | | Follow up to https://sourceware.org/ml/libc-alpha/2015-11/msg00272.html Always do tls descriptor initialization at load time during relocation processing (as if DF_BIND_NOW were set for the binary) to avoid barriers at every tls access. This patch mimics bind-now semantics in the lazy relocation code of the arm target (elf_machine_lazy_rel). Ideally the static linker should be updated too to not emit tlsdesc relocs in DT_REL*, so elf_machine_lazy_rel is not called on them at all. [BZ #18572] * sysdeps/arm/dl-machine.h (elf_machine_lazy_rel): Do symbol binding non-lazily for R_ARM_TLS_DESC.
* [BZ #17078] arm: remove prelinker support for R_ARM_TLS_DESCSzabolcs Nagy2017-11-031-31/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch reverts commit 9c82da17b5794efebe005de2fd22d61a3ea4b58a Author: Maciej W. Rozycki <macro@codesourcery.com> Date: 2014-07-17 19:22:05 +0100 [BZ #17078] ARM: R_ARM_TLS_DESC prelinker support This only implemented support for the lazy binding case (and thus closed the bugzilla ticket prematurely), however tlsdesc on arm is not correct with lazy binding because there is a data race between the lazy initialization code and tlsdesc resolver functions. Lazy initialization of tlsdesc entries will be removed from arm to fix the data races and thus this half-finished prelinker support is no longer useful. [BZ #17078] * sysdeps/arm/dl-machine.h (elf_machine_rela): Remove the R_ARM_TLS_DESC case. (elf_machine_lazy_rel): Remove the prelink check.
* Update ARM libm-test-ulps.Joseph Myers2017-10-051-2/+8
| | | | * sysdeps/arm/libm-test-ulps: Update.
* arm: Don't check _DYNAMIC in elf_machine_load_addressH.J. Lu2017-10-031-3/+0
| | | | | | | | | Since arm can't convert access _DYNAMIC via GOT, which needs dynamic relocation, to PC-relative at link-time, don't check _DYNAMIC in elf_machine_load_address. * sysdeps/arm/dl-machine.h (elf_machine_load_address): Don't check _DYNAMIC.
* arm: Update elf_machine_load_address for static PIEH.J. Lu2017-09-291-1/+11
| | | | | | | | | | When --enable-static-pie is used to configure glibc, we need to use _dl_relocate_static_pie to compute load address in static PIE. * sysdeps/arm/dl-machine.h (elf_machine_load_address): Use _dl_relocate_static_pie instead of _dl_start to compute load address in static PIE. Return 0 if _DYNAMIC is undefined for static executable.
* arm: Check PIC instead of SHARED in start.SH.J. Lu2017-09-291-2/+2
| | | | | | | Since start.o may be compiled as PIC, we should check PIC instead of SHARED. * sysdeps/arm/start.S (_start): Check PIC instead of SHARED.
* Enable unwind info in libc-start.c and backtrace.cWilco Dijkstra2017-09-191-9/+0
| | | | | | | | | | | | | | | | | Add unwind info to __libc_start_main so that unwinding continues one extra level to _start. Similarly add unwind info to backtrace. Given many targets require this, do this in a general way. * csu/Makefile: Add -funwind-tables to libc-start.c. * debug/Makefile: Add -funwind-tables to backtrace.c. * sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c. * sysdeps/arm/Makefile: Likewise. * sysdeps/i386/Makefile: Likewise. * sysdeps/m68k/Makefile: Likewise. * sysdeps/mips/Makefile: Likewise. * sysdeps/nios2/Makefile: Likewise. * sysdeps/sh/Makefile: Likewise. * sysdeps/sparc/Makefile: Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-07-05 16:38:01 +0000