about summary refs log tree commit diff
path: root/sysdeps/aarch64
Commit message (Collapse)AuthorAgeFilesLines
* aarch64/strncmp: Use lsr instead of mov+lsrSiddhesh Poyarekar2018-03-151-4/+2
| | | | A lsr can do what the mov and lsr did.
* aarch64/strncmp: Unbreak builds with old binutilsSiddhesh Poyarekar2018-03-141-2/+4
| | | | | Binutils 2.26.* and older do not support moves with shifted registers, so use a separate shift instruction instead.
* aarch64: Improve strncmp for mutually misaligned inputsSiddhesh Poyarekar2018-03-131-15/+80
| | | | | | | | | | | | | | | | | | | | | The mutually misaligned inputs on aarch64 are compared with a simple byte copy, which is not very efficient. Enhance the comparison similar to strcmp by loading a double-word at a time. The peak performance improvement (i.e. 4k maxlen comparisons) due to this on the strncmp microbenchmark is as follows: falkor: 3.5x (up to 72% time reduction) cortex-a73: 3.5x (up to 71% time reduction) cortex-a53: 3.5x (up to 71% time reduction) All mutually misaligned inputs from 16 bytes maxlen onwards show upwards of 15% improvement and there is no measurable effect on the performance of aligned/mutually aligned inputs. * sysdeps/aarch64/strncmp.S (count): New macro. (strncmp): Store misaligned length in SRC1 in COUNT. (mutual_align): Adjust. (misaligned8): Load dword at a time when it is safe.
* hurd: add gscope supportSamuel Thibault2018-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* aarch64: Fix branch target to loop16Siddhesh Poyarekar2018-03-061-1/+1
| | | | | | | I goofed up when changing the loop8 name to loop16 and missed on out the branch instance. Fixed and actually build tested this time. * sysdeps/aarch64/memcmp.S (more16): Fix branch target loop16.
* aarch64: Optimized memcmp for medium to large sizesSiddhesh Poyarekar2018-03-061-21/+55
| | | | | | | | | | | | | This improved memcmp provides a fast path for compares up to 16 bytes and then compares 16 bytes at a time, thus optimizing loads from both sources. The glibc memcmp microbenchmark retains performance (with an error of ~1ns) for smaller compare sizes and reduces up to 31% of execution time for compares up to 4K on the APM Mustang. On Qualcomm Falkor this improves to almost 48%, i.e. it is almost 2x improvement for sizes of 2K and above. * sysdeps/aarch64/memcmp.S: Widen comparison to 16 bytes at a time.
* aarch64/strcmp: fix misaligned loop jump targetSiddhesh Poyarekar2018-02-221-1/+1
| | | | | | | | | I accidentally set the loop jump back label as misaligned8 instead of do_misaligned. The typo is harmless but it's always nice to not have to unnecessarily execute those two instructions. * sysdeps/aarch64/strcmp.S (do_misaligned): Jump back to do_misaligned, not misaligned8.
* IFUNC for Cavium ThunderX2Steve Ellcey2018-02-225-10/+51
| | | | | | | | | | | | | | | | | * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add memcpy_thunderx2. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (MAX_IFUNC): Increment to 4. (__libc_ifunc_impl_list): Add __memcpy_thunderx2. * sysdeps/aarch64/multiarch/memcpy.c (libc_ifunc): Add IS_THUNDERX2 and IS_THUNDERX2PA checks. * sysdeps/aarch64/multiarch/memcpy_thunderx.S (USE_THUNDERX2): Use macro to set name appropriately. (memcpy): Use USE_THUNDERX2 macro to modify prefetches. * sysdeps/aarch64/multiarch/memcpy_thunderx2.S: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_THUNDERX2PA): New macro. (IS_THUNDERX2): New macro.
* [AArch64] Fix include.Wilco Dijkstra2018-02-151-1/+1
| | | | | | Fix include to use <>. * sysdeps/aarch64/fpu/fpu_control.h: Use <> in include.
* Remove slow paths from powWilco Dijkstra2018-02-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the slow paths from pow. Like several other double precision math functions, pow is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1). The worst case error is ~0.506ULP. A simple test over a few hundred million values shows pow is 10% faster on average. This fixes BZ #13932. [BZ #13932] * sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove. * benchtests/pow-inputs: Update comment for slow path cases. * manual/probes.texi (slowpow_p10): Delete removed probe. (slowpow_p10): Likewise. * math/Makefile: Remove halfulp.c and slowpow.c. * sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1. * sysdeps/generic/math_private.h (__exp1): Remove error argument. (__halfulp): Remove. (__slowpow): Remove. * sysdeps/i386/fpu/halfulp.c: Delete file. * sysdeps/i386/fpu/slowpow.c: Likewise. * sysdeps/ia64/fpu/halfulp.c: Likewise. * sysdeps/ia64/fpu/slowpow.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument, improve comments and add error analysis. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis. (power1): Remove function: (log1): Remove error argument, add error analysis. (my_log2): Remove function. * sysdeps/ieee754/dbl-64/halfulp.c: Delete file. * sysdeps/ieee754/dbl-64/slowpow.c: Likewise. * sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise. * sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c. * sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c, slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise. * sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file. * sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
* [AArch64] Fix testsuite error due to fpsr/fscr changeWilco Dijkstra2018-02-101-0/+2
| | | | | | Add features.h include for __GNUC_PREREQ. * sysdeps/aarch64/fpu/fpu_control.h: Add features.h to fix build error.
* [AArch64] Use builtins for fpcr/fpsrWilco Dijkstra2018-02-091-4/+11
| | | | | | | | | | Since GCC has support for accessing FPSR/FPCR, use them when possible so that the asm instructions can be removed eventually. Although GCC 5 supports the builtins, it has an optimization bug, so use them from GCC 6 onwards. * sysdeps/aarch64/fpu/fpu_control.h: Use builtins for accessing FPCR/FPSR.
* aarch64: Use the L() macro for labels in memcmpSiddhesh Poyarekar2018-02-021-16/+16
| | | | | | The L() macro makes the assembly a bit more readable. * sysdeps/aarch64/memcmp.S: Use L() macro for labels.
* aarch64: fix static pie enabled libc when main is in a shared librarySzabolcs Nagy2018-01-121-2/+11
| | | | | | | | | | | | | | | | | In the static pie enabled libc, crt1.o uses the same position independent code as rcrt1.o and crt1.o is used instead of Scrt1.o when -no-pie executables are linked. When main is not defined in the executable, but in a shared library crt1.o is currently broken, it assumes main is local. (glibc has a test for this but i missed it in my previous testing.) To make both rcrt1.o and crt1.o happy with the same code, a wrapper is introduced around main: with this crt1.o works with extern main symbol while rcrt1.o does not depend on GOT relocations. (The change only affects static pie enabled libc. Further simplification of start.S is possible in the future by using the same approach for Scrt1.o too.) * aarch64/start.S (_start): Use __wrap_main. (__wrap_main): New local symbol.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-01117-117/+117
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* aarch64: update libm-test-ulpsSzabolcs Nagy2017-12-201-20/+20
| | | | * sysdeps/aarch64/libm-test-ulps: Update.
* aarch64: fix memset with --disable-multi-archAdhemerval Zanella2017-12-201-0/+4
| | | | * sysdeps/aarch64/memset.S (MEMSET): Define.
* aarch64: fix start code for static pieSzabolcs Nagy2017-12-181-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | There are three flavors of the crt startup code: 1) crt1.o used for non-pie, 2) Scrt1.o used for dynamic linked pie (dynamic linker relocates), 3) rcrt1.o used for static linked pie (self relocation is needed) In the --enable-static-pie case crt1.o is built with -DPIC and in case of static linking it interposes _dl_relocate_static_pie in libc to avoid self relocation. Scrt1.o is built with -DPIC -DSHARED and it relies on GOT entries that the static linker cannot relax and thus need relocation before the start code is executed, so rcrt1.o needs separate implementation. This implementation does not work for .text > 4G position independent executables, which is fine since the toolchain does not support -mcmodel=large with -fPIE. Tests pass with ld/22269 and ld/22263 binutils bugs fixed. * sysdeps/aarch64/start.S (_start): Handle PIC && !SHARED case.
* aarch64: Improve strcmp unaligned performanceSiddhesh Poyarekar2017-12-131-2/+29
| | | | | | | | | | | | | | Replace the simple byte-wise compare in the misaligned case with a dword compare with page boundary checks in place. For simplicity I've chosen a 4K page boundary so that we don't have to query the actual page size on the system. This results in up to 3x improvement in performance in the unaligned case on falkor and about 2.5x improvement on mustang as measured using bench-strcmp. * sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a time whenever possible.
* aarch64: Avoid hidden symbols for memcpy/memmove into static binariesSiddhesh Poyarekar2017-12-041-0/+2
| | | | | | | | | | | The __GI_* symbol aliases for __memcpy_generic are unnecessary since they're never used. Add them only for libc.so to avoid PLT. Maybe some time in future we need to evaluate the relative cost of PLT vs gains from multiarch memcpy implementations and take a call on whether to drop this completely. * sysdeps/aarch64/multiarch/memcpy_generic.S (__GI_memcpy): Define only for libc.so.
* Use libm_alias_float for aarch64.Joseph Myers2017-11-2813-13/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes aarch64 libm function implementations use libm_alias_float to define function aliases. Tested with build-many-glibcs.py for aarch64-linux-gnu that installed stripped shared libraries are unchanged by the patch. * sysdeps/aarch64/fpu/s_ceilf.c: Include <libm-alias-float.h>. (ceilf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_floorf.c: Include <libm-alias-float.h>. (floorf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_fmaf.c: Include <libm-alias-float.h>. (fmaf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_fmaxf.c: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_fminf.c: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_llrintf.c: Include <libm-alias-float.h>. (llrintf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_llroundf.c: Include <libm-alias-float.h>. (llroundf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_lrintf.c: Include <libm-alias-float.h>. (lrintf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_lroundf.c: Include <libm-alias-float.h>. (lroundf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_nearbyintf.c: Include <libm-alias-float.h>. (nearbyintf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_rintf.c: Include <libm-alias-float.h>. (rintf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_roundf.c: Include <libm-alias-float.h>. (roundf): Define using libm_alias_float. * sysdeps/aarch64/fpu/s_truncf.c: Include <libm-alias-float.h>. (truncf): Define using libm_alias_float.
* Use libm_alias_double for aarch64.Joseph Myers2017-11-2713-13/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes aarch64 libm function implementations use libm_alias_double to define function aliases. Tested with build-many-glibcs.py for aarch64-linux-gnu that installed stripped shared libraries are unchanged by the patch. * sysdeps/aarch64/fpu/s_ceil.c: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_floor.c: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_fmax.c: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_fmin.c: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_llrint.c: Include <libm-alias-double.h>. (llrint): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_llround.c: Include <libm-alias-double.h>. (llround): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_lrint.c: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_lround.c: Include <libm-alias-double.h>. (lround): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_nearbyint.c: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_rint.c: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_round.c: Include <libm-alias-double.h>. (round): Define using libm_alias_double. * sysdeps/aarch64/fpu/s_trunc.c: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double.
* aarch64: Optimized memset for falkorSiddhesh Poyarekar2017-11-209-22/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic memset reads dczid_el0 on every memset. This has a significant impact on falkor for a range of sizes because reading dczid_el0 is slow. The DZP bit in the dczid_el0 register does not change dynamically, so it is safe to read once during program startup. With this patch dczid_el0 is read once during startup and zva_size is cached. This is used to invoke the falkor-specific memset; the generic memset routine remains unchanged. The gains due to this are significant for falkor, with run time reductions as high as 48%. Here's a sample from the falkor tests: Function: memset Variant: walk simple_memset __memset_falkor __memset_generic ===================================================================== length=256, char=0: 139.96 (-698.28%) 9.07 ( 48.26%) 17.53 length=257, char=0: 140.50 (-699.03%) 9.53 ( 45.80%) 17.58 length=258, char=0: 140.96 (-703.95%) 9.58 ( 45.36%) 17.53 length=259, char=0: 141.56 (-705.16%) 9.53 ( 45.79%) 17.58 length=260, char=0: 142.15 (-710.76%) 9.57 ( 45.39%) 17.53 length=261, char=0: 142.50 (-710.39%) 9.53 ( 45.78%) 17.58 length=262, char=0: 142.97 (-715.09%) 9.57 ( 45.42%) 17.54 length=263, char=0: 143.51 (-716.18%) 9.53 ( 45.80%) 17.58 length=264, char=0: 143.93 (-720.55%) 9.58 ( 45.39%) 17.54 length=265, char=0: 144.56 (-722.07%) 9.53 ( 45.80%) 17.59 length=266, char=0: 144.98 (-726.42%) 9.58 ( 45.42%) 17.54 length=267, char=0: 145.53 (-727.53%) 9.53 ( 45.80%) 17.59 length=268, char=0: 146.25 (-731.81%) 9.53 ( 45.79%) 17.58 length=269, char=0: 146.52 (-735.39%) 9.53 ( 45.66%) 17.54 length=270, char=0: 146.97 (-735.81%) 9.53 ( 45.80%) 17.58 length=271, char=0: 147.54 (-741.08%) 9.58 ( 45.38%) 17.54 length=512, char=0: 268.26 (-1307.85%) 12.06 ( 36.71%) 19.05 length=513, char=0: 268.73 (-1273.89%) 13.56 ( 30.68%) 19.56 length=514, char=0: 269.31 (-1276.89%) 13.56 ( 30.68%) 19.56 length=515, char=0: 269.73 (-1279.05%) 13.56 ( 30.68%) 19.56 length=516, char=0: 270.34 (-1282.24%) 13.56 ( 30.67%) 19.56 length=517, char=0: 270.83 (-1284.71%) 13.56 ( 30.66%) 19.56 length=518, char=0: 271.20 (-1286.54%) 13.56 ( 30.67%) 19.56 length=519, char=0: 271.67 (-1288.67%) 13.65 ( 30.24%) 19.56 length=520, char=0: 272.14 (-1291.04%) 13.65 ( 30.22%) 19.56 length=521, char=0: 272.66 (-1293.69%) 13.65 ( 30.23%) 19.56 length=522, char=0: 273.14 (-1296.13%) 13.65 ( 30.20%) 19.56 length=523, char=0: 273.64 (-1298.75%) 13.65 ( 30.23%) 19.56 length=524, char=0: 274.34 (-1302.16%) 13.66 ( 30.20%) 19.57 length=525, char=0: 274.64 (-1297.78%) 13.56 ( 30.99%) 19.65 length=526, char=0: 275.20 (-1300.04%) 13.56 ( 31.01%) 19.66 length=527, char=0: 275.66 (-1302.86%) 13.56 ( 30.99%) 19.65 length=1024, char=0: 524.46 (-2169.75%) 20.12 ( 12.92%) 23.11 length=1025, char=0: 525.14 (-2124.63%) 21.62 ( 8.40%) 23.61 length=1026, char=0: 525.59 (-2125.36%) 21.88 ( 7.37%) 23.62 length=1027, char=0: 525.98 (-2127.14%) 21.62 ( 8.46%) 23.62 length=1028, char=0: 526.68 (-2131.10%) 21.62 ( 8.42%) 23.61 length=1029, char=0: 527.10 (-2131.70%) 21.79 ( 7.73%) 23.62 length=1030, char=0: 527.54 (-2118.51%) 21.62 ( 9.10%) 23.78 length=1031, char=0: 527.98 (-2136.37%) 21.62 ( 8.43%) 23.61 length=1032, char=0: 528.70 (-2139.38%) 21.62 ( 8.43%) 23.61 length=1033, char=0: 529.25 (-2124.37%) 21.62 ( 9.11%) 23.79 length=1034, char=0: 529.48 (-2142.95%) 21.62 ( 8.43%) 23.61 length=1035, char=0: 530.11 (-2145.13%) 21.62 ( 8.44%) 23.61 length=1036, char=0: 530.76 (-2147.10%) 21.79 ( 7.73%) 23.62 length=1037, char=0: 531.03 (-2149.45%) 21.62 ( 8.42%) 23.61 length=1038, char=0: 531.64 (-2151.87%) 21.62 ( 8.42%) 23.61 length=1039, char=0: 531.99 (-2151.63%) 21.80 ( 7.75%) 23.63 * sysdeps/aarch64/memset-reg.h: New file. * sysdeps/aarch64/memset.S: Use it. (__memset): Rename to MEMSET macro. [ZVA_MACRO]: Use zva_macro. * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add memset_generic and memset_falkor. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add memset ifuncs. * sysdeps/aarch64/multiarch/init-arch.h (INIT_ARCH): New local variable zva_size. * sysdeps/aarch64/multiarch/memset.c: New file. * sysdeps/aarch64/multiarch/memset_generic.S: New file. * sysdeps/aarch64/multiarch/memset_falkor.S: New file. * sysdeps/aarch64/multiarch/rtld-memset.S: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (DCZID_DZP_MASK): New macro. (DCZID_BS_MASK): Likewise. (init_cpu_features): Read and set zva_size. * sysdeps/unix/sysv/linux/aarch64/cpu-features.h (struct cpu_features): New member zva_size.
* aarch64: Fix f{max,min}{f} build for GCC 4.9 and 5Adhemerval Zanella2017-11-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | GCC 4.9 and 5 do not generate a correct f{max,min}nm instruction for __builtin_{fmax,fmin}{f} without -ffinite-math-only. It is clear a compiler issue since the instruction can handle NaN and Inf correctly and GCC6+ does not show this issue. We can backport a fix to GCC 5, raise the minimum required GCC version for aarch64 (since GCC 4.9 branch is now closed [1]) and/or add configure check to check for this issue. However I think -ffinite-math-only should be safe for these specific implementations and it is a simpler solution. Checked on aarch64-linux-gnu with GCC 5.3.1. * sysdeps/aarch64/fpu/Makefile (CFLAGS-s_fmax.c, CFLAGS-s_fmaxf.c, CFLAGS-s_fmin.c, CFLAGS-s_fminf.c): New rule: add -ffinite-math-only. [1] https://gcc.gnu.org/ml/gcc/2016-08/msg00010.html Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}Adhemerval Zanella2017-11-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two new internal defines to set the internal pthread_mutex_t layout required by the supported ABIS: 1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define __nusers fields before or after __kind. The preferred value for is 0 for new ports and it sets __nusers before __kind. 2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and __list members will be place inside an union for linuxthreads compatibility. The preferred value is 0 for ports and it sets to not use an union to define both fields. It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32. Checked with a make check run-built-tests=no on all afected ABIs. [BZ #22298] * nptl/allocatestack.c (allocate_stack): Check if __PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if __PTHREAD_MUTEX_HAVE_PREV is defined. * nptl/descr.h (pthread): Likewise. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. (__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE for internal layout. (__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE whether to use an union for __spins and __list fields. (__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION case. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add tests for internal pthread_mutex_t offsetsAdhemerval Zanella2017-11-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: optimize _dl_tlsdesc_dynamic fast pathSzabolcs Nagy2017-11-031-54/+51
| | | | | | | | Remove some load/store instructions from the dynamic tlsdesc resolver fast path. This gives around 20% faster tls access in dlopened shared libraries (assuming glibc ran out of static tls space). * sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Optimize.
* aarch64: Remove barriers from TLS descriptor functionsSzabolcs Nagy2017-11-034-342/+1
| | | | | | | | | | | | | | | | | | | | Remove ldar synchronization and most lazy TLSDESC initialization related code. * sysdeps/aarch64/dl-machine.h (elf_machine_runtime_setup): Remove DT_TLSDESC_GOT initialization. * sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return_lazy): Remove. (_dl_tlsdesc_resolve_rela): Likewise. (_dl_tlsdesc_resolve_hold): Likewise. (_dl_tlsdesc_undefweak): Remove ldar. (_dl_tlsdesc_dynamic): Likewise. * sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_return_lazy): Remove. (_dl_tlsdesc_resolve_rela): Likewise. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_resolve_rela_fixup): Remove. (_dl_tlsdesc_resolve_hold_fixup): Likewise. (_dl_tlsdesc_resolve_rela): Likewise. (_dl_tlsdesc_resolve_hold): Likewise.
* aarch64: Disable lazy symbol binding of TLSDESCSzabolcs Nagy2017-11-031-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always do TLS descriptor initialization at load time during relocation processing to avoid barriers at every TLS access. In non-dlopened shared libraries the overhead of tls access vs static global access is > 3x bigger when lazy initialization is used (_dl_tlsdesc_return_lazy) compared to bind-now (_dl_tlsdesc_return) so the barriers dominate tls access performance. TLSDESC relocs are in DT_JMPREL which are processed at load time using elf_machine_lazy_rel which is only supposed to do lightweight initialization using the DT_TLSDESC_PLT trampoline (the trampoline code jumps to the entry point in DT_TLSDESC_GOT which does the lazy tlsdesc initialization at runtime). This patch changes elf_machine_lazy_rel in aarch64 to do the symbol binding and initialization as if DF_BIND_NOW was set, so the non-lazy code path of elf/do-rel.h was replicated. The static linker could be changed to emit TLSDESC relocs in DT_REL*, which are processed non-lazily, but the goal of this patch is to always guarantee bind-now semantics, even if the binary was produced with an old linker, so the barriers can be dropped in tls descriptor functions. After this change the synchronizing ldar instructions can be dropped as well as the lazy initialization machinery including the DT_TLSDESC_GOT setup. I believe this should be done on all targets, including ones where no barrier is needed for lazy initialization. There is very little gain in optimizing for large number of symbolic tlsdesc relocations which is an extremely uncommon case. And currently the tlsdesc entries are only readonly protected with -z now and some hardennings against writable JUMPSLOT relocs don't work for TLSDESC so they are a security hazard. (But to fix that the static linker has to be changed.) * sysdeps/aarch64/dl-machine.h (elf_machine_lazy_rel): Do symbol binding and initialization non-lazily for R_AARCH64_TLSDESC.
* aarch64: Add missing math Makefile for recent commitSzabolcs Nagy2017-10-231-0/+8
| | | | | Without -fno-math-errno, the builtins just do a call instead of inlining a single instruction.
* aarch64: Implement math acceleration via builtinsMichael Collison2017-10-2330-288/+250
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts asm statements into builtins for AArch64. As an example for the file sysdeps/aarch64/fpu/s_ceil.c, we convert the function from double __ceil (double x) { double result; asm ("frintp\t%d0, %d1" : "=w" (result) : "w" (x) ); return result; } into double __ceil (double x) { return __builtin_ceil (x); } Tested on aarch64-linux-gnu with gcc-4.9.4 and gcc-6. * sysdeps/aarch64/fpu/e_sqrt.c (ieee754_sqrt): Replace asm statements with __builtin_sqrt. * sysdeps/aarch64/fpu/e_sqrtf.c (ieee754_sqrtf): Replace asm statements with __builtin_sqrtf. * sysdeps/aarch64/fpu/s_ceil.c (__ceil): Replace asm statements with __builtin_ceil. * sysdeps/aarch64/fpu/s_ceilf.c (__ceilf): Replace asm statements with __builtin_ceilf. * sysdeps/aarch64/fpu/s_floor.c (__floor): Replace asm statements with __builtin_floor. * sysdeps/aarch64/fpu/s_floorf.c (__floorf): Replace asm statements with __builtin_floorf. * sysdeps/aarch64/fpu/s_fma.c (__fma): Replace asm statements with __builtin_fma. * sysdeps/aarch64/fpu/s_fmaf.c (__fmaf): Replace asm statements with __builtin_fmaf. * sysdeps/aarch64/fpu/s_fmax.c (__fmax): Replace asm statements with __builtin_fmax. * sysdeps/aarch64/fpu/s_fmaxf.c (__fmaxf): Replace asm statements with __builtin_fmaxf. * sysdeps/aarch64/fpu/s_fmin.c (__fmin): Replace asm statements with __builtin_fmin. * sysdeps/aarch64/fpu/s_fminf.c (__fminf): Replace asm statements with __builtin_fminf. * sysdeps/aarch64/fpu/s_frint.c: Delete file. * sysdeps/aarch64/fpu/s_frintf.c: Delete file. * sysdeps/aarch64/fpu/s_llrint.c (__llrint): Replace asm statements with builtin_rint and conversion to int. * sysdeps/aarch64/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/aarch64/fpu/s_llround.c (__llround): Replace asm statements with builtin_llround. * sysdeps/aarch64/fpu/s_llroundf.c (__llroundf): Likewise. * sysdeps/aarch64/fpu/s_lrint.c (__lrint): Replace asm statements with builtin_rint and conversion to long int. * sysdeps/aarch64/fpu/s_lrintf.c (__lrintf): Likewise. * sysdeps/aarch64/fpu/s_lround.c (__lround): Replace asm statements with builtin_lround. * sysdeps/aarch64/fpu/s_lroundf.c (__lroundf): Replace asm statements with builtin_lroundf. * sysdeps/aarch64/fpu/s_nearbyint.c (__nearbyint): Replace asm statements with __builtin_nearbyint. * sysdeps/aarch64/fpu/s_nearbyintf.c (__nearbyintf): Replace asm statements with __builtin_nearbyintf. * sysdeps/aarch64/fpu/s_rint.c (__rint): Replace asm statements with __builtin_rint. * sysdeps/aarch64/fpu/s_rintf.c (__rintf): Replace asm statements with __builtin_rintf. * sysdeps/aarch64/fpu/s_round.c (__round): Replace asm statements with __builtin_round. * sysdeps/aarch64/fpu/s_roundf.c (__roundf): Replace asm statements with __builtin_roundf. * sysdeps/aarch64/fpu/s_trunc.c (__trunc): Replace asm statements with __builtin_trunc. * sysdeps/aarch64/fpu/s_truncf.c (__truncf): Replace asm statements with __builtin_truncf. * sysdeps/aarch64/fpu/Makefile: Build e_sqrt[f].c with -fno-math-errno.
* [AARCH64] Rewrite elf_machine_load_address using _DYNAMIC symbolSzabolcs Nagy2017-10-181-34/+5
| | | | | | | | | | | | | | | | | | | | This patch rewrites aarch64 elf_machine_load_address to use special _DYNAMIC symbol instead of _dl_start. The static address of _DYNAMIC symbol is stored in the first GOT entry. Here is the change which makes this solution work (part of binutils 2.24): https://sourceware.org/ml/binutils/2013-06/msg00248.html i386, x86_64 targets use the same method to do this as well. The original implementation relies on a trick that R_AARCH64_ABS32 relocation being resolved at link time and the static address fits in the 32bits. However, in LP64, normally, the address is defined to be 64 bit. Here is the C version one which should be portable in all cases. * sysdeps/aarch64/dl-machine.h (elf_machine_load_address): Use _DYNAMIC symbol to calculate load address.
* aarch64: Optimized implementation of memmove for Qualcomm FalkorSiddhesh Poyarekar2017-10-054-2/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an optimized memmove implementation for the Qualcomm Falkor processor core. Due to the way the falkor memcpy needs to be written, code cannot be easily shared between memmove and memcpy like in case of other aarch64 memcpy implementations due to which this routine is separate. The underlying principle is the same as that of memcpy where it tries to use registers with the same lower 4 bits for fetching the same stream, thus optimizing hardware prefetcher performance. The memcpy copy loop copies 64 bytes at a time using the same register pair since that's the way to train the hardware prefetcher on the falkor core. memmove cannot quite do that since it needs to avoid overlaps, so it does the next best thing, i.e. has a 32 byte loop with a 32 byte end (prefetch a loop ahead to account for overlapping locations) with register pairs that alias so that they hit the same prefetcher. Due to this difference in loop size, they have to currently be separate implementations but efforts are on to try and get memmove to fall back into memcpy whenever it can without simply duplicating all of the code. Performance: The routine fares around 20-25% better than the generic memmove for most medium to large sizes (i.e. > 128 bytes) for the new walking memmove benchmark (memmove-walk) with an unexplained regression between 1K and 2K. The minor regression is something worth looking into for us, but the remaining gains are significant enough that we would like this included upstream as we looking into the cause for the regression. Here is a snippet of the numbers as generated from the microbenchmark by the compare_strings script. Comparisons are against __memmove_generic: Function: memmove Variant: walk __memmove_thunderx __memmove_falkor __memmove_generic ======================================================================================================================== <snip> length=16384: 12508800.00 ( 6.09%) 11486800.00 ( 13.76%) 13319600.00 length=16400: 13614200.00 ( -0.67%) 11585000.00 ( 14.33%) 13523600.00 length=16385: 13448400.00 ( 0.10%) 11732700.00 ( 12.84%) 13461200.00 length=16399: 13594100.00 ( -0.22%) 11859600.00 ( 12.57%) 13564400.00 length=16386: 13211600.00 ( 1.13%) 11503800.00 ( 13.91%) 13362400.00 length=16398: 13218600.00 ( 2.12%) 11573200.00 ( 14.30%) 13504700.00 length=16387: 13510900.00 ( -0.37%) 11744200.00 ( 12.76%) 13461300.00 length=16397: 13603700.00 ( -0.15%) 11878200.00 ( 12.55%) 13583200.00 length=16388: 13461700.00 ( -0.13%) 11558000.00 ( 14.03%) 13444100.00 length=16396: 13517500.00 ( -0.03%) 11561300.00 ( 14.45%) 13513900.00 length=16389: 13534100.00 ( 0.17%) 11756800.00 ( 13.28%) 13556900.00 length=16395: 13585600.00 ( 0.11%) 11791800.00 ( 13.30%) 13601200.00 length=16390: 13480100.00 ( -0.13%) 11685500.00 ( 13.20%) 13462100.00 length=16394: 13529900.00 ( -0.23%) 11549800.00 ( 14.43%) 13498200.00 length=16391: 13595400.00 ( -0.26%) 11768200.00 ( 13.22%) 13560600.00 length=16393: 13567000.00 ( 0.20%) 11779700.00 ( 13.35%) 13594700.00 length=32768: 71308800.00 ( -6.53%) 50220800.00 ( 24.98%) 66939200.00 length=32784: 72100800.00 (-11.55%) 50114100.00 ( 22.47%) 64636300.00 length=32769: 71767000.00 ( -7.10%) 51238400.00 ( 23.54%) 67010000.00 length=32783: 70113700.00 (-40.95%) 51129000.00 ( -2.78%) 49744400.00 length=32770: 71367600.00 ( -6.52%) 50244700.00 ( 25.01%) 67000900.00 length=32782: 64366700.00 ( 4.71%) 50101400.00 ( 25.83%) 67545600.00 length=32771: 71440100.00 ( -6.51%) 51263900.00 ( 23.57%) 67074900.00 length=32781: 66993000.00 ( 0.34%) 51108300.00 ( 23.97%) 67220300.00 length=32772: 71443900.00 (-60.50%) 50062100.00 (-12.47%) 44512600.00 length=32780: 71759100.00 ( -6.58%) 50263200.00 ( 25.35%) 67328600.00 length=32773: 71714900.00 (-33.21%) 51076600.00 ( 5.12%) 53835400.00 length=32779: 71756900.00 ( -6.56%) 51290800.00 ( 23.83%) 67337800.00 length=32774: 59689300.00 (-34.55%) 50068400.00 (-12.86%) 44363300.00 length=32778: 71847500.00 (-18.20%) 50084100.00 ( 17.61%) 60786500.00 length=32775: 71599300.00 ( -6.54%) 51278200.00 ( 23.70%) 67204800.00 length=32777: 71862900.00 (-60.85%) 51094000.00 (-14.36%) 44677900.00 length=65536: 282848000.00 ( -6.60%) 199187000.00 ( 24.93%) 265325000.00 length=65552: 243285000.00 (-41.61%) 198512000.00 (-15.54%) 171805000.00 length=65537: 255415000.00 (-23.47%) 202499000.00 ( 2.11%) 206858000.00 length=65551: 280122000.00 (-62.95%) 203349000.00 (-18.29%) 171911000.00 length=65538: 283676000.00 (-14.46%) 198368000.00 ( 19.96%) 247848000.00 length=65550: 275566000.00 (-51.76%) 198494000.00 ( -9.31%) 181581000.00 length=65539: 283699000.00 ( -6.58%) 203453000.00 ( 23.57%) 266195000.00 length=65549: 286572000.00 ( -6.65%) 202607000.00 ( 24.60%) 268712000.00 length=65540: 283710000.00 ( -6.59%) 199161000.00 ( 25.17%) 266160000.00 length=65548: 237573000.00 ( 11.48%) 198462000.00 ( 26.06%) 268395000.00 length=65541: 284150000.00 ( -6.58%) 203273000.00 ( 23.75%) 266600000.00 length=65547: 286250000.00 ( -6.70%) 202594000.00 ( 24.48%) 268263000.00 length=65542: 284167000.00 ( -6.60%) 199122000.00 ( 25.31%) 266584000.00 length=65546: 285656000.00 ( -6.59%) 198443000.00 ( 25.95%) 268002000.00 length=65543: 284600000.00 ( -6.58%) 203247000.00 ( 23.89%) 267030000.00 length=65545: 285665000.00 ( -6.40%) 202575000.00 ( 24.55%) 268472000.00 <snip> * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add memmove_falkor. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Likewise. * sysdeps/aarch64/multiarch/memmove.c: Likewise. * sysdeps/aarch64/multiarch/memmove_falkor.S: New file.
* aarch64: don't use MIN in dl-machine.hSzabolcs Nagy2017-10-041-1/+2
| | | | | | | MIN is used, but param.h may not be included, so expand its single use inline. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Expand MIN.
* AArch64: update libm-test-ulpsSzabolcs Nagy2017-09-281-2/+8
| | | | | | Update for new expf and logf. * sysdeps/aarch64/libm-test-ulps: Update.
* Optimized generic expf and exp2f with wrappersSzabolcs Nagy2017-09-251-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on new expf and exp2f code from https://github.com/ARM-software/optimized-routines/ with wrapper on aarch64: expf reciprocal-throughput: 2.3x faster expf latency: 1.7x faster without wrapper on aarch64: expf reciprocal-throughput: 3.3x faster expf latency: 1.7x faster without wrapper on aarch64: exp2f reciprocal-throughput: 2.8x faster exp2f latency: 1.3x faster libm.so size on aarch64: .text size: -152 bytes .rodata size: -1740 bytes expf/exp2f worst case nearest rounding error: 0.502 ulp worst case non-nearest rounding error: 1 ulp Error checks are inline and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls and once for __expf_finite calls on targets where the new code is used.) Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Const data is kept in a separate translation unit which complicates maintenance a bit, but is expected to give good code for literal loads on most targets and allows sharing data across expf, exp2f and powf. (This data is disabled on i386, m68k and ia64 which have their own expf, exp2f and powf code.) Some details may need target specific tweaks: - best convert and round to int operation in the arg reduction may be different across targets. - code was optimized on fma target, optimal polynomial eval may be different without fma. - gcc does not always generate good code for fp bit representation access via unions or it may be inherently slow on some targets. The libm-test-ulps will need adjustment because.. - The argument reduction ideally uses nearest rounded rint, but that is not efficient on most targets, so the polynomial can get evaluated on a wider interval in non-nearest rounding mode making 1 ulp errors common in that case. - The polynomial is evaluated such that it may have 1 ulp error on negative tiny inputs with upward rounding. * math/Makefile (type-float-routines): Add math_errf and e_exp2f_data. * sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define. (roundtoint, converttoint): Likewise. * sysdeps/ieee754/flt-32/e_expf.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h: New file. * sysdeps/ieee754/flt-32/math_errf.c: New file. * sysdeps/ieee754/flt-32/t_exp2f.h: Remove. * sysdeps/i386/fpu/e_exp2f_data.c: New file. * sysdeps/i386/fpu/math_errf.c: New file. * sysdeps/ia64/fpu/e_exp2f_data.c: New file. * sysdeps/ia64/fpu/math_errf.c: New file. * sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
* Enable unwind info in libc-start.c and backtrace.cWilco Dijkstra2017-09-191-4/+0
| | | | | | | | | | | | | | | | | Add unwind info to __libc_start_main so that unwinding continues one extra level to _start. Similarly add unwind info to backtrace. Given many targets require this, do this in a general way. * csu/Makefile: Add -funwind-tables to libc-start.c. * debug/Makefile: Add -funwind-tables to backtrace.c. * sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c. * sysdeps/arm/Makefile: Likewise. * sysdeps/i386/Makefile: Likewise. * sysdeps/m68k/Makefile: Likewise. * sysdeps/mips/Makefile: Likewise. * sysdeps/nios2/Makefile: Likewise. * sysdeps/sh/Makefile: Likewise. * sysdeps/sparc/Makefile: Likewise.
* AArch64: use movz/movk instead of literal pools in start.SWang Boshi2017-09-182-3/+17
| | | | | | | | | | | | | | | eXecute-Only Memory (XOM) is a protection mechanism against some ROP attacks. XOM sets the code as executable and unreadable, so the access to any data, like literal pools, in the code section causes the fault with XOM. The compiler can disable literal pools for C source files, but not for assembly files, so I use movz/movk instead of literal pools in start.S for XOM. I add MOVL macro with movz/movk instructions like movl pseudo-instruction in armasm, and use the macro instead of literal pools. * sysdeps/aarch64/start.S: Use MOVL instead of literal pools. * sysdeps/aarch64/sysdep.h (MOVL): Add MOVL macro.
* Obsolete pow10 functions.Joseph Myers2017-09-011-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* ILP32 math changesSteve Ellcey2017-08-318-12/+87
| | | | | | | | | | | | | | | | | | | | | | * sysdeps/aarch64/fpu/s_llrint.c (OREG_SIZE): New macro. * sysdeps/aarch64/fpu/s_llround.c (OREG_SIZE): Likewise. * sysdeps/aarch64/fpu/s_llrintf.c (OREGS, IREGS): Remove. (IREG_SIZE, OREG_SIZE): New macros. * sysdeps/aarch64/fpu/s_llroundf.c: (OREGS, IREGS): Remove. (IREG_SIZE, OREG_SIZE): New macros. * sysdeps/aarch64/fpu/s_lrintf.c (IREGS): Remove. (IREG_SIZE): New macro. * sysdeps/aarch64/fpu/s_lroundf.c (IREGS): Remove. (IREG_SIZE): New macro. * sysdeps/aarch64/fpu/s_lrint.c (get-rounding-mode.h, stdint.h): New includes. (IREG_SIZE, OREG_SIZE): Initialize if not already set. (OREGS, IREGS): Set based on IREG_SIZE and OREG_SIZE. (__CONCATX): Handle exceptions correctly on large values that may set FE_INVALID. * sysdeps/aarch64/fpu/s_lround.c (IREG_SIZE, OREG_SIZE): Initialize if not already set. (OREGS, IREGS): Set based on IREG_SIZE and OREG_SIZE.
* Change argument type passed to ifunc resolversSteve Ellcey2017-08-311-1/+1
| | | | | * sysdeps/aarch64/dl-irel.h: (elf_ifunc_invoke): Change argument type in resolver call.
* elf: Remove internal_function attributeFlorian Weimer2017-08-312-3/+1
|
* aarch64: Use PTR_REG macro to fix ILP32 bug and make code consistentSteve Ellcey2017-08-221-1/+1
| | | | | * sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Use PTR_REG macro in cmp instruction.
* [AArch64] Optimized memcmp.Wilco Dijkstra2017-08-101-105/+71
| | | | | | | | | | | | | | | | | | | | This is an optimized memcmp for AArch64. This is a complete rewrite using a different algorithm. The previous version split into cases where both inputs were aligned, the inputs were mutually aligned and unaligned using a byte loop. The new version combines all these cases, while small inputs of less than 8 bytes are handled separately. This allows the main code to be sped up using unaligned loads since there are now at least 8 bytes to be compared. After the first 8 bytes, align the first input. This ensures each iteration does at most one unaligned access and mutually aligned inputs behave as aligned. After the main loop, process the last 8 bytes using unaligned accesses. This improves performance of (mutually) aligned cases by 25% and unaligned by >500% (yes >6 times faster) on large inputs. * sysdeps/aarch64/memcmp.S (memcmp): Rewrite of optimized memcmp.
* memcpy_falkor: Fix code style in commentsSiddhesh Poyarekar2017-08-091-7/+4
|
* aarch64: Optimized memcpy for Qualcomm Falkor processorSiddhesh Poyarekar2017-08-094-3/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an optimized implementation of the memcpy routine that gives a significant gain in performance for all sizes of copies on the Qualcomm Falkor processor. A detailed rationale of the implementation is written in a comment in the patch. This implementation improves time for copies up to 128 bytes by up to 15% and for larger copies by up to 35% in the glibc microbenchmark. The memcpy-random benchmark sees improvements in all sizes in the range of 13%-18%. Here are the full numbers extracted from the glibc microbenchmark using the commands: ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic length align1 align2 ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy-large.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic length align1 align2 ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy-random.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic max-size Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: default ================================================================================ length=1,align1=0,align2=0: 33.59 (-115.00%) 15.62 (0.00%) 15.62 length=1,align1=0,align2=0: 16.41 (-10.53%) 14.06 (5.26%) 14.84 length=1,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=1,align1=0,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=1,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=1: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=1,align2=1: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=4,align1=0,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=4,align1=2,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=4,align1=0,align2=2: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=4,align1=2,align2=2: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=8,align1=0,align2=0: 14.84 (-5.56%) 13.28 (5.56%) 14.06 length=8,align1=3,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=8,align1=0,align2=3: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=8,align1=3,align2=3: 13.28 (-6.25%) 13.28 (-6.25%) 12.50 length=16,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=16,align1=4,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=16,align1=0,align2=4: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=16,align1=4,align2=4: 13.28 (-6.25%) 12.50 (0.00%) 12.50 length=32,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=32,align1=5,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=32,align1=0,align2=5: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=32,align1=5,align2=5: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=64,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=64,align1=6,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=64,align1=0,align2=6: 14.06 (5.26%) 14.06 (5.26%) 14.84 length=64,align1=6,align2=6: 14.84 (-11.77%) 14.06 (-5.88%) 13.28 length=128,align1=0,align2=0: 17.19 (-4.76%) 14.84 (9.52%) 16.41 length=128,align1=7,align2=0: 16.41 (4.55%) 15.62 (9.09%) 17.19 length=128,align1=0,align2=7: 16.41 (0.00%) 14.06 (14.29%) 16.41 length=128,align1=7,align2=7: 16.41 (4.55%) 15.62 (9.09%) 17.19 length=256,align1=0,align2=0: 21.88 (-3.70%) 21.09 (0.00%) 21.09 length=256,align1=8,align2=0: 21.09 (-3.85%) 21.09 (-3.85%) 20.31 length=256,align1=0,align2=8: 20.31 (-4.00%) 20.31 (-4.00%) 19.53 length=256,align1=8,align2=8: 21.88 (-7.69%) 20.31 (0.00%) 20.31 length=512,align1=0,align2=0: 28.91 (-2.78%) 28.91 (-2.78%) 28.12 length=512,align1=9,align2=0: 30.47 (-2.63%) 30.47 (-2.63%) 29.69 length=512,align1=0,align2=9: 29.69 (0.00%) 29.69 (0.00%) 29.69 length=512,align1=9,align2=9: 28.12 (-2.86%) 28.12 (-2.86%) 27.34 length=1024,align1=0,align2=0: 44.53 (0.00%) 44.53 (0.00%) 44.53 length=1024,align1=10,align2=0: 50.00 (0.00%) 50.00 (0.00%) 50.00 length=1024,align1=0,align2=10: 49.22 (1.56%) 50.78 (-1.56%) 50.00 length=1024,align1=10,align2=10: 44.53 (-1.79%) 43.75 (0.00%) 43.75 length=2048,align1=0,align2=0: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=2048,align1=11,align2=0: 89.84 (0.00%) 89.84 (0.00%) 89.84 length=2048,align1=0,align2=11: 89.84 (0.00%) 89.84 (0.00%) 89.84 length=2048,align1=11,align2=11: 75.78 (0.00%) 75.78 (0.00%) 75.78 length=4096,align1=0,align2=0: 141.41 (-0.56%) 140.62 (0.00%) 140.62 length=4096,align1=12,align2=0: 171.09 (-0.46%) 170.31 (0.00%) 170.31 length=4096,align1=0,align2=12: 170.31 (0.00%) 170.31 (0.00%) 170.31 length=4096,align1=12,align2=12: 140.62 (0.00%) 140.62 (0.00%) 140.62 length=8192,align1=0,align2=0: 278.91 (-0.28%) 275.78 (0.84%) 278.12 length=8192,align1=13,align2=0: 338.28 (0.23%) 335.94 (0.92%) 339.06 length=8192,align1=0,align2=13: 338.28 (0.00%) 455.47 (-34.64%) 338.28 length=8192,align1=13,align2=13: 278.12 (-0.28%) 275.78 (0.56%) 277.34 length=16384,align1=0,align2=0: 535.94 (-0.15%) 531.25 (0.73%) 535.16 length=16384,align1=14,align2=0: 659.38 (0.12%) 659.38 (0.12%) 660.16 length=16384,align1=0,align2=14: 659.38 (0.00%) 657.03 (0.36%) 659.38 length=16384,align1=14,align2=14: 535.16 (0.44%) 532.81 (0.87%) 537.50 length=32768,align1=0,align2=0: 1260.94 (10.68%) 1121.88 (20.53%) 1411.72 length=32768,align1=15,align2=0: 1368.75 (10.02%) 1376.56 (9.50%) 1521.09 length=32768,align1=0,align2=15: 1333.59 (10.91%) 1373.44 (8.25%) 1496.88 length=32768,align1=15,align2=15: 1256.25 (13.96%) 1125.78 (22.90%) 1460.16 length=65536,align1=0,align2=0: 2853.91 (30.11%) 2589.06 (36.60%) 4083.59 length=65536,align1=16,align2=0: 2850.00 (30.14%) 2589.84 (36.52%) 4079.69 length=65536,align1=0,align2=16: 2853.12 (30.60%) 2589.84 (37.00%) 4110.94 length=65536,align1=16,align2=16: 2850.78 (30.07%) 2589.06 (36.49%) 4076.56 length=0,align1=0,align2=0: 15.62 (-5.26%) 16.41 (-10.53%) 14.84 length=0,align1=0,align2=0: 14.84 (-5.56%) 14.84 (-5.56%) 14.06 length=0,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=0,align1=0,align2=0: 16.41 (-16.67%) 14.84 (-5.56%) 14.06 length=1,align1=0,align2=0: 15.62 (4.76%) 15.62 (4.76%) 16.41 length=1,align1=1,align2=0: 15.62 (0.00%) 14.84 (5.00%) 15.62 length=1,align1=0,align2=1: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=1,align1=1,align2=1: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=0: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=2,align2=0: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=2: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=2,align1=2,align2=2: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=3,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=3,align1=3,align2=0: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=3,align1=0,align2=3: 15.62 (-11.11%) 14.06 (0.00%) 14.06 length=3,align1=3,align2=3: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=4,align1=0,align2=0: 17.97 (-27.78%) 14.06 (0.00%) 14.06 length=4,align1=4,align2=0: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=4,align1=0,align2=4: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=4,align1=4,align2=4: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=5,align1=0,align2=0: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=5,align1=5,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=5,align1=0,align2=5: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=5,align1=5,align2=5: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=6,align1=0,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=6,align1=6,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=6,align1=0,align2=6: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=6,align1=6,align2=6: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=7,align1=0,align2=0: 14.84 (-11.77%) 14.06 (-5.88%) 13.28 length=7,align1=7,align2=0: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=7,align1=0,align2=7: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=7,align1=7,align2=7: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=8,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=8,align1=8,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=8,align1=0,align2=8: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=8,align1=8,align2=8: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=9,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=9,align1=9,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=9,align1=0,align2=9: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=9,align1=9,align2=9: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=10,align1=0,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=10,align1=10,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=10,align1=0,align2=10: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=10,align1=10,align2=10: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=11,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=11,align1=11,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=11,align1=0,align2=11: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=11,align1=11,align2=11: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=12,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=12,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=0,align2=12: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=12,align2=12: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=13,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=13,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=0,align2=13: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=13,align2=13: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=14,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=14,align1=14,align2=0: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=14,align1=0,align2=14: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=14,align1=14,align2=14: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=15,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=15,align1=15,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=15,align1=0,align2=15: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=15,align1=15,align2=15: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=16,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=16,align1=16,align2=0: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=16,align1=0,align2=16: 14.84 (-11.77%) 13.28 (0.00%) 13.28 length=16,align1=16,align2=16: 13.28 (-6.25%) 12.50 (0.00%) 12.50 length=17,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=17,align1=17,align2=0: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=17,align1=0,align2=17: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=17,align1=17,align2=17: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=18,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=18,align1=18,align2=0: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=18,align1=0,align2=18: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=18,align1=18,align2=18: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=19,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=19,align1=19,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=19,align1=0,align2=19: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=19,align1=19,align2=19: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=20,align1=0,align2=0: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=20,align1=20,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=20,align1=0,align2=20: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=20,align1=20,align2=20: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=21,align1=0,align2=0: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=21,align1=21,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=21,align1=0,align2=21: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=21,align1=21,align2=21: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=22,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=22,align1=22,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=22,align1=0,align2=22: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=22,align1=22,align2=22: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=23,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=23,align1=23,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=23,align1=0,align2=23: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=23,align1=23,align2=23: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=24,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=24,align1=24,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=24,align1=0,align2=24: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=24,align1=24,align2=24: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=25,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=25,align1=25,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=25,align1=0,align2=25: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=25,align1=25,align2=25: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=26,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=26,align1=26,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=26,align1=0,align2=26: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=26,align1=26,align2=26: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=27,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=27,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=0,align2=27: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=27,align2=27: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=28,align1=28,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=0,align2=28: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=28,align2=28: 14.84 (-11.77%) 13.28 (0.00%) 13.28 length=29,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=29,align1=29,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=29,align1=0,align2=29: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=29,align1=29,align2=29: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=30,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=30,align1=30,align2=0: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=30,align1=0,align2=30: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=30,align1=30,align2=30: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=0,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=31,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=31,align1=0,align2=31: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=31,align2=31: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=48,align1=0,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=48,align1=3,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=48,align1=0,align2=3: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=48,align1=3,align2=3: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=80,align1=0,align2=0: 15.62 (-11.11%) 14.84 (-5.56%) 14.06 length=80,align1=5,align2=0: 15.62 (-11.11%) 16.41 (-16.67%) 14.06 length=80,align1=0,align2=5: 14.06 (0.00%) 15.62 (-11.11%) 14.06 length=80,align1=5,align2=5: 15.62 (-5.26%) 17.19 (-15.79%) 14.84 length=96,align1=0,align2=0: 14.06 (0.00%) 14.84 (-5.56%) 14.06 length=96,align1=6,align2=0: 14.84 (-5.56%) 16.41 (-16.67%) 14.06 length=96,align1=0,align2=6: 14.06 (0.00%) 14.84 (-5.56%) 14.06 length=96,align1=6,align2=6: 14.84 (-5.56%) 17.19 (-22.22%) 14.06 length=112,align1=0,align2=0: 17.19 (-4.76%) 14.06 (14.29%) 16.41 length=112,align1=7,align2=0: 17.19 (0.00%) 16.41 (4.55%) 17.19 length=112,align1=0,align2=7: 16.41 (0.00%) 14.84 (9.52%) 16.41 length=112,align1=7,align2=7: 17.19 (0.00%) 17.19 (0.00%) 17.19 length=144,align1=0,align2=0: 17.19 (-10.00%) 17.97 (-15.00%) 15.62 length=144,align1=9,align2=0: 17.19 (-4.76%) 18.75 (-14.29%) 16.41 length=144,align1=0,align2=9: 20.31 (-8.33%) 18.75 (0.00%) 18.75 length=144,align1=9,align2=9: 18.75 (-4.35%) 18.75 (-4.35%) 17.97 length=160,align1=0,align2=0: 18.75 (-4.35%) 17.97 (0.00%) 17.97 length=160,align1=10,align2=0: 18.75 (4.00%) 18.75 (4.00%) 19.53 length=160,align1=0,align2=10: 19.53 (-4.17%) 17.97 (4.17%) 18.75 length=160,align1=10,align2=10: 18.75 (-4.35%) 18.75 (-4.35%) 17.97 length=176,align1=0,align2=0: 18.75 (-4.35%) 17.19 (4.35%) 17.97 length=176,align1=11,align2=0: 19.53 (0.00%) 19.53 (0.00%) 19.53 length=176,align1=0,align2=11: 19.53 (-4.17%) 18.75 (0.00%) 18.75 length=176,align1=11,align2=11: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=192,align1=0,align2=0: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=192,align1=12,align2=0: 21.09 (-8.00%) 18.75 (4.00%) 19.53 length=192,align1=0,align2=12: 18.75 (0.00%) 18.75 (0.00%) 18.75 length=192,align1=12,align2=12: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=208,align1=0,align2=0: 17.97 (0.00%) 20.31 (-13.04%) 17.97 length=208,align1=13,align2=0: 19.53 (7.41%) 21.09 (0.00%) 21.09 length=208,align1=0,align2=13: 23.44 (-11.11%) 21.09 (0.00%) 21.09 length=208,align1=13,align2=13: 21.09 (-3.85%) 21.09 (-3.85%) 20.31 length=224,align1=0,align2=0: 21.09 (-8.00%) 20.31 (-4.00%) 19.53 length=224,align1=14,align2=0: 23.44 (-11.11%) 20.31 (3.70%) 21.09 length=224,align1=0,align2=14: 21.09 (3.57%) 20.31 (7.14%) 21.88 length=224,align1=14,align2=14: 20.31 (0.00%) 19.53 (3.85%) 20.31 length=240,align1=0,align2=0: 20.31 (-4.00%) 19.53 (0.00%) 19.53 length=240,align1=15,align2=0: 22.66 (0.00%) 20.31 (10.34%) 22.66 length=240,align1=0,align2=15: 20.31 (-4.00%) 20.31 (-4.00%) 19.53 length=240,align1=15,align2=15: 21.88 (0.00%) 21.09 (3.57%) 21.88 length=272,align1=0,align2=0: 20.31 (0.00%) 28.12 (-38.46%) 20.31 length=272,align1=17,align2=0: 22.66 (0.00%) 27.34 (-20.69%) 22.66 length=272,align1=0,align2=17: 25.78 (-10.00%) 28.12 (-20.00%) 23.44 length=272,align1=17,align2=17: 22.66 (-3.57%) 27.34 (-25.00%) 21.88 length=288,align1=0,align2=0: 23.44 (-7.14%) 27.34 (-25.00%) 21.88 length=288,align1=18,align2=0: 22.66 (0.00%) 27.34 (-20.69%) 22.66 length=288,align1=0,align2=18: 23.44 (-3.45%) 25.00 (-10.35%) 22.66 length=288,align1=18,align2=18: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=304,align1=0,align2=0: 21.88 (0.00%) 21.88 (0.00%) 21.88 length=304,align1=19,align2=0: 23.44 (-3.45%) 22.66 (0.00%) 22.66 length=304,align1=0,align2=19: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=304,align1=19,align2=19: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=320,align1=0,align2=0: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=320,align1=20,align2=0: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=320,align1=0,align2=20: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=320,align1=20,align2=20: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=336,align1=0,align2=0: 21.88 (0.00%) 24.22 (-10.71%) 21.88 length=336,align1=21,align2=0: 22.66 (0.00%) 25.00 (-10.35%) 22.66 length=336,align1=0,align2=21: 25.78 (0.00%) 25.00 (3.03%) 25.78 length=336,align1=21,align2=21: 25.00 (0.00%) 23.44 (6.25%) 25.00 length=352,align1=0,align2=0: 24.22 (0.00%) 24.22 (0.00%) 24.22 length=352,align1=22,align2=0: 25.00 (0.00%) 25.00 (0.00%) 25.00 length=352,align1=0,align2=22: 25.00 (-3.23%) 25.00 (-3.23%) 24.22 length=352,align1=22,align2=22: 25.00 (-3.23%) 24.22 (0.00%) 24.22 length=368,align1=0,align2=0: 25.00 (-3.23%) 23.44 (3.23%) 24.22 length=368,align1=23,align2=0: 25.00 (0.00%) 24.22 (3.12%) 25.00 length=368,align1=0,align2=23: 25.00 (-3.23%) 25.00 (-3.23%) 24.22 length=368,align1=23,align2=23: 25.00 (-6.67%) 23.44 (0.00%) 23.44 length=384,align1=0,align2=0: 24.22 (0.00%) 24.22 (0.00%) 24.22 length=384,align1=24,align2=0: 25.00 (0.00%) 24.22 (3.12%) 25.00 length=384,align1=0,align2=24: 25.00 (0.00%) 25.78 (-3.12%) 25.00 length=384,align1=24,align2=24: 24.22 (-3.33%) 23.44 (0.00%) 23.44 length=400,align1=0,align2=0: 25.00 (-3.23%) 26.56 (-9.68%) 24.22 length=400,align1=25,align2=0: 25.78 (-3.12%) 27.34 (-9.38%) 25.00 length=400,align1=0,align2=25: 27.34 (0.00%) 27.34 (0.00%) 27.34 length=400,align1=25,align2=25: 26.56 (0.00%) 25.78 (2.94%) 26.56 length=416,align1=0,align2=0: 26.56 (-3.03%) 25.78 (0.00%) 25.78 length=416,align1=26,align2=0: 28.12 (-2.86%) 27.34 (0.00%) 27.34 length=416,align1=0,align2=26: 27.34 (-2.94%) 28.12 (-5.88%) 26.56 length=416,align1=26,align2=26: 25.78 (0.00%) 26.56 (-3.03%) 25.78 length=432,align1=0,align2=0: 27.34 (-2.94%) 25.78 (2.94%) 26.56 length=432,align1=27,align2=0: 28.12 (-2.86%) 27.34 (0.00%) 27.34 length=432,align1=0,align2=27: 27.34 (0.00%) 28.12 (-2.86%) 27.34 length=432,align1=27,align2=27: 25.78 (0.00%) 25.78 (0.00%) 25.78 length=448,align1=0,align2=0: 26.56 (-3.03%) 25.78 (0.00%) 25.78 length=448,align1=28,align2=0: 27.34 (0.00%) 27.34 (0.00%) 27.34 length=448,align1=0,align2=28: 27.34 (0.00%) 28.12 (-2.86%) 27.34 length=448,align1=28,align2=28: 25.78 (0.00%) 25.78 (0.00%) 25.78 length=464,align1=0,align2=0: 25.78 (0.00%) 28.12 (-9.09%) 25.78 length=464,align1=29,align2=0: 28.12 (-2.86%) 29.69 (-8.57%) 27.34 length=464,align1=0,align2=29: 30.47 (0.00%) 30.47 (0.00%) 30.47 length=464,align1=29,align2=29: 28.12 (0.00%) 27.34 (2.78%) 28.12 length=480,align1=0,align2=0: 29.69 (-5.56%) 28.12 (0.00%) 28.12 length=480,align1=30,align2=0: 31.25 (-2.56%) 29.69 (2.56%) 30.47 length=480,align1=0,align2=30: 29.69 (0.00%) 30.47 (-2.63%) 29.69 length=480,align1=30,align2=30: 28.12 (0.00%) 28.12 (0.00%) 28.12 length=496,align1=0,align2=0: 28.12 (0.00%) 27.34 (2.78%) 28.12 length=496,align1=31,align2=0: 30.47 (-2.63%) 29.69 (0.00%) 29.69 length=496,align1=0,align2=31: 29.69 (0.00%) 30.47 (-2.63%) 29.69 length=496,align1=31,align2=31: 28.12 (-2.86%) 28.12 (-2.86%) 27.34 length=1024,align1=0,align2=0: 44.53 (0.00%) 44.53 (0.00%) 44.53 length=1024,align1=32,align2=0: 44.53 (-1.79%) 44.53 (-1.79%) 43.75 length=1024,align1=0,align2=32: 44.53 (-1.79%) 43.75 (0.00%) 43.75 length=1024,align1=32,align2=32: 43.75 (1.75%) 43.75 (1.75%) 44.53 length=1056,align1=0,align2=0: 46.88 (-1.69%) 46.88 (-1.69%) 46.09 length=1056,align1=33,align2=0: 53.12 (0.00%) 52.34 (1.47%) 53.12 length=1056,align1=0,align2=33: 52.34 (0.00%) 53.12 (-1.49%) 52.34 length=1056,align1=33,align2=33: 46.09 (0.00%) 46.88 (-1.69%) 46.09 length=1088,align1=0,align2=0: 46.88 (-1.69%) 46.09 (0.00%) 46.09 length=1088,align1=34,align2=0: 52.34 (0.00%) 52.34 (0.00%) 52.34 length=1088,align1=0,align2=34: 53.12 (-3.03%) 53.12 (-3.03%) 51.56 length=1088,align1=34,align2=34: 46.09 (0.00%) 46.88 (-1.69%) 46.09 length=1120,align1=0,align2=0: 49.22 (-1.61%) 48.44 (0.00%) 48.44 length=1120,align1=35,align2=0: 54.69 (1.41%) 55.47 (0.00%) 55.47 length=1120,align1=0,align2=35: 57.03 (0.00%) 55.47 (2.74%) 57.03 length=1120,align1=35,align2=35: 48.44 (0.00%) 49.22 (-1.61%) 48.44 length=1152,align1=0,align2=0: 47.66 (1.61%) 48.44 (0.00%) 48.44 length=1152,align1=36,align2=0: 55.47 (-1.43%) 55.47 (-1.43%) 54.69 length=1152,align1=0,align2=36: 58.59 (-1.35%) 55.47 (4.05%) 57.81 length=1152,align1=36,align2=36: 48.44 (0.00%) 49.22 (-1.61%) 48.44 length=1184,align1=0,align2=0: 53.12 (-3.03%) 50.78 (1.52%) 51.56 length=1184,align1=37,align2=0: 61.72 (-2.60%) 57.03 (5.19%) 60.16 length=1184,align1=0,align2=37: 62.50 (-1.27%) 57.03 (7.60%) 61.72 length=1184,align1=37,align2=37: 53.12 (-1.49%) 50.78 (2.99%) 52.34 length=1216,align1=0,align2=0: 53.91 (-4.55%) 50.78 (1.52%) 51.56 length=1216,align1=38,align2=0: 60.94 (0.00%) 57.03 (6.41%) 60.94 length=1216,align1=0,align2=38: 60.16 (0.00%) 57.81 (3.90%) 60.16 length=1216,align1=38,align2=38: 52.34 (-1.52%) 50.00 (3.03%) 51.56 length=1248,align1=0,align2=0: 54.69 (-2.94%) 53.12 (0.00%) 53.12 length=1248,align1=39,align2=0: 64.06 (-1.23%) 60.16 (4.94%) 63.28 length=1248,align1=0,align2=39: 60.94 (-2.63%) 60.16 (-1.32%) 59.38 length=1248,align1=39,align2=39: 53.12 (0.00%) 52.34 (1.47%) 53.12 length=1280,align1=0,align2=0: 52.34 (-1.52%) 52.34 (-1.52%) 51.56 length=1280,align1=40,align2=0: 61.72 (3.66%) 59.38 (7.32%) 64.06 length=1280,align1=0,align2=40: 60.94 (-2.63%) 60.16 (-1.32%) 59.38 length=1280,align1=40,align2=40: 52.34 (-1.52%) 52.34 (-1.52%) 51.56 length=1312,align1=0,align2=0: 54.69 (-1.45%) 55.47 (-2.90%) 53.91 length=1312,align1=41,align2=0: 63.28 (0.00%) 62.50 (1.23%) 63.28 length=1312,align1=0,align2=41: 62.50 (0.00%) 62.50 (0.00%) 62.50 length=1312,align1=41,align2=41: 53.91 (0.00%) 54.69 (-1.45%) 53.91 length=1344,align1=0,align2=0: 54.69 (0.00%) 54.69 (0.00%) 54.69 length=1344,align1=42,align2=0: 62.50 (0.00%) 62.50 (0.00%) 62.50 length=1344,align1=0,align2=42: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1344,align1=42,align2=42: 53.91 (0.00%) 53.91 (0.00%) 53.91 length=1376,align1=0,align2=0: 65.62 (-16.67%) 68.75 (-22.22%) 56.25 length=1376,align1=43,align2=0: 71.88 (-9.52%) 73.44 (-11.90%) 65.62 length=1376,align1=0,align2=43: 72.66 (-12.05%) 74.22 (-14.46%) 64.84 length=1376,align1=43,align2=43: 64.06 (-13.89%) 67.97 (-20.83%) 56.25 length=1408,align1=0,align2=0: 57.03 (-1.39%) 68.75 (-22.22%) 56.25 length=1408,align1=44,align2=0: 65.62 (-1.20%) 73.44 (-13.25%) 64.84 length=1408,align1=0,align2=44: 64.84 (0.00%) 74.22 (-14.46%) 64.84 length=1408,align1=44,align2=44: 56.25 (-1.41%) 68.75 (-23.94%) 55.47 length=1440,align1=0,align2=0: 67.97 (-14.47%) 64.84 (-9.21%) 59.38 length=1440,align1=45,align2=0: 74.22 (-10.47%) 68.75 (-2.33%) 67.19 length=1440,align1=0,align2=45: 72.66 (-6.90%) 69.53 (-2.30%) 67.97 length=1440,align1=45,align2=45: 65.62 (-13.51%) 58.59 (-1.35%) 57.81 length=1472,align1=0,align2=0: 66.41 (-14.86%) 58.59 (-1.35%) 57.81 length=1472,align1=46,align2=0: 73.44 (-9.30%) 67.19 (0.00%) 67.19 length=1472,align1=0,align2=46: 70.31 (-4.65%) 67.97 (-1.16%) 67.19 length=1472,align1=46,align2=46: 57.81 (0.00%) 58.59 (-1.35%) 57.81 length=1504,align1=0,align2=0: 60.94 (0.00%) 60.94 (0.00%) 60.94 length=1504,align1=47,align2=0: 71.09 (-1.11%) 70.31 (0.00%) 70.31 length=1504,align1=0,align2=47: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1504,align1=47,align2=47: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1536,align1=0,align2=0: 62.50 (-3.90%) 60.16 (0.00%) 60.16 length=1536,align1=48,align2=0: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1536,align1=0,align2=48: 61.72 (-3.95%) 60.16 (-1.32%) 59.38 length=1536,align1=48,align2=48: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1568,align1=0,align2=0: 80.47 (-27.16%) 63.28 (0.00%) 63.28 length=1568,align1=49,align2=0: 86.72 (-18.09%) 72.66 (1.06%) 73.44 length=1568,align1=0,align2=49: 74.22 (-3.26%) 74.22 (-3.26%) 71.88 length=1568,align1=49,align2=49: 62.50 (0.00%) 61.72 (1.25%) 62.50 length=1600,align1=0,align2=0: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1600,align1=50,align2=0: 73.44 (0.00%) 71.88 (2.13%) 73.44 length=1600,align1=0,align2=50: 72.66 (0.00%) 73.44 (-1.08%) 72.66 length=1600,align1=50,align2=50: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1632,align1=0,align2=0: 64.84 (0.00%) 64.84 (0.00%) 64.84 length=1632,align1=51,align2=0: 75.78 (0.00%) 75.00 (1.03%) 75.78 length=1632,align1=0,align2=51: 78.91 (0.00%) 75.78 (3.96%) 78.91 length=1632,align1=51,align2=51: 64.84 (-2.47%) 64.84 (-2.47%) 63.28 length=1664,align1=0,align2=0: 64.84 (-1.22%) 64.84 (-1.22%) 64.06 length=1664,align1=52,align2=0: 75.78 (0.00%) 75.00 (1.03%) 75.78 length=1664,align1=0,align2=52: 80.47 (-0.98%) 75.78 (4.90%) 79.69 length=1664,align1=52,align2=52: 64.06 (-1.23%) 65.62 (-3.70%) 63.28 length=1696,align1=0,align2=0: 69.53 (-3.49%) 72.66 (-8.14%) 67.19 length=1696,align1=53,align2=0: 80.47 (-0.98%) 82.03 (-2.94%) 79.69 length=1696,align1=0,align2=53: 80.47 (0.96%) 82.03 (-0.96%) 81.25 length=1696,align1=53,align2=53: 68.75 (-2.33%) 72.66 (-8.14%) 67.19 length=1728,align1=0,align2=0: 67.97 (0.00%) 72.66 (-6.90%) 67.97 length=1728,align1=54,align2=0: 80.47 (-0.98%) 82.81 (-3.92%) 79.69 length=1728,align1=0,align2=54: 78.91 (-1.00%) 82.03 (-5.00%) 78.12 length=1728,align1=54,align2=54: 68.75 (0.00%) 72.66 (-5.68%) 68.75 length=1760,align1=0,align2=0: 77.34 (-12.50%) 68.75 (0.00%) 68.75 length=1760,align1=55,align2=0: 91.41 (-8.33%) 79.69 (5.56%) 84.38 length=1760,align1=0,align2=55: 88.28 (-10.78%) 80.47 (-0.98%) 79.69 length=1760,align1=55,align2=55: 77.34 (-11.24%) 68.75 (1.12%) 69.53 length=1792,align1=0,align2=0: 78.12 (-14.94%) 68.75 (-1.15%) 67.97 length=1792,align1=56,align2=0: 88.28 (-4.63%) 79.69 (5.56%) 84.38 length=1792,align1=0,align2=56: 88.28 (-9.71%) 80.47 (0.00%) 80.47 length=1792,align1=56,align2=56: 77.34 (-11.24%) 68.75 (1.12%) 69.53 length=1824,align1=0,align2=0: 72.66 (7.92%) 70.31 (10.89%) 78.91 length=1824,align1=57,align2=0: 85.94 (5.17%) 82.03 (9.48%) 90.62 length=1824,align1=0,align2=57: 82.03 (3.67%) 82.81 (2.75%) 85.16 length=1824,align1=57,align2=57: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1856,align1=0,align2=0: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1856,align1=58,align2=0: 83.59 (-0.94%) 82.03 (0.94%) 82.81 length=1856,align1=0,align2=58: 178.12 (-115.09%) 82.81 (0.00%) 82.81 length=1856,align1=58,align2=58: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1888,align1=0,align2=0: 73.44 (-1.08%) 78.91 (-8.60%) 72.66 length=1888,align1=59,align2=0: 85.94 (0.00%) 89.84 (-4.55%) 85.94 length=1888,align1=0,align2=59: 84.38 (0.00%) 89.06 (-5.56%) 84.38 length=1888,align1=59,align2=59: 72.66 (-1.09%) 78.12 (-8.70%) 71.88 length=1920,align1=0,align2=0: 72.66 (-1.09%) 78.12 (-8.70%) 71.88 length=1920,align1=60,align2=0: 85.94 (0.00%) 89.84 (-4.55%) 85.94 length=1920,align1=0,align2=60: 85.16 (0.00%) 89.06 (-4.59%) 85.16 length=1920,align1=60,align2=60: 72.66 (-1.09%) 78.91 (-9.78%) 71.88 length=1952,align1=0,align2=0: 75.00 (-1.05%) 75.00 (-1.05%) 74.22 length=1952,align1=61,align2=0: 88.28 (0.00%) 87.50 (0.88%) 88.28 length=1952,align1=0,align2=61: 87.50 (0.00%) 88.28 (-0.89%) 87.50 length=1952,align1=61,align2=61: 74.22 (0.00%) 74.22 (0.00%) 74.22 length=1984,align1=0,align2=0: 75.00 (-1.05%) 73.44 (1.05%) 74.22 length=1984,align1=62,align2=0: 89.06 (-0.89%) 87.50 (0.88%) 88.28 length=1984,align1=0,align2=62: 87.50 (0.00%) 88.28 (-0.89%) 87.50 length=1984,align1=62,align2=62: 74.22 (0.00%) 74.22 (0.00%) 74.22 length=2016,align1=0,align2=0: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=2016,align1=63,align2=0: 91.41 (-0.86%) 90.62 (0.00%) 90.62 length=2016,align1=0,align2=63: 89.84 (0.00%) 90.62 (-0.87%) 89.84 length=2016,align1=63,align2=63: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=4096,align1=0,align2=0: 141.41 (-0.56%) 146.88 (-4.44%) 140.62 Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: large ================================================================================ length=65543,align1=0,align2=0: 4018.75 (3.09%) 2634.38 (36.47%) 4146.88 length=65551,align1=0,align2=3: 4425.00 (-6.47%) 3134.38 (24.59%) 4156.25 length=65567,align1=3,align2=0: 2909.38 (29.95%) 3134.38 (24.53%) 4153.12 length=65599,align1=3,align2=5: 4415.62 (-6.16%) 3134.38 (24.64%) 4159.38 length=131079,align1=0,align2=0: 5765.62 (30.38%) 5240.62 (36.72%) 8281.25 length=131087,align1=0,align2=3: 8831.25 (-6.56%) 6271.88 (24.32%) 8287.50 length=131103,align1=3,align2=0: 5793.75 (29.05%) 6268.75 (23.23%) 8165.62 length=131135,align1=3,align2=5: 5806.25 (29.97%) 6259.38 (24.50%) 8290.62 length=262151,align1=0,align2=0: 11850.00 (28.91%) 10762.50 (35.43%) 16668.80 length=262159,align1=0,align2=3: 12043.80 (27.72%) 12700.00 (23.78%) 16662.50 length=262175,align1=3,align2=0: 12046.90 (27.90%) 12687.50 (24.07%) 16709.40 length=262207,align1=3,align2=5: 11984.40 (28.08%) 12678.10 (23.91%) 16662.50 length=524295,align1=0,align2=0: 24825.00 (25.00%) 24268.80 (27.34%) 33400.00 length=524303,align1=0,align2=3: 35731.20 (-6.53%) 25678.10 (23.44%) 33540.60 length=524319,align1=3,align2=0: 25893.80 (22.71%) 25725.00 (23.22%) 33503.10 length=524351,align1=3,align2=5: 25887.50 (22.86%) 25690.60 (23.45%) 33559.40 length=1048583,align1=0,align2=0: 50621.90 (0.30%) 50600.00 (0.34%) 50771.90 length=1048591,align1=0,align2=3: 53206.20 (0.54%) 51081.20 (4.51%) 53493.80 length=1048607,align1=3,align2=0: 53221.90 (0.32%) 51975.00 (2.66%) 53393.80 length=1048639,align1=3,align2=5: 53240.60 (0.36%) 51953.10 (2.77%) 53431.20 length=2097159,align1=0,align2=0: 103744.00 (-2.00%) 102447.00 (-1.00%) 102425.00 length=2097167,align1=0,align2=3: 108588.00 (-1.00%) 105159.00 (2.00%) 107606.00 length=2097183,align1=3,align2=0: 107678.00 (0.00%) 105250.00 (2.00%) 108125.00 length=2097215,align1=3,align2=5: 107906.00 (1.00%) 105841.00 (3.00%) 109475.00 length=4194311,align1=0,align2=0: 202994.00 (0.00%) 202500.00 (1.00%) 204809.00 length=4194319,align1=0,align2=3: 213350.00 (0.00%) 205997.00 (3.00%) 213384.00 length=4194335,align1=3,align2=0: 212653.00 (0.00%) 206444.00 (3.00%) 212900.00 length=4194367,align1=3,align2=5: 213044.00 (0.00%) 206084.00 (3.00%) 213847.00 length=8388615,align1=0,align2=0: 401294.00 (0.00%) 401231.00 (0.00%) 401944.00 length=8388623,align1=0,align2=3: 480872.00 (-14.00%) 406444.00 (3.00%) 422900.00 length=8388639,align1=3,align2=0: 422147.00 (0.00%) 407750.00 (3.00%) 422803.00 length=8388671,align1=3,align2=5: 442003.00 (-5.00%) 407125.00 (3.00%) 423509.00 length=16777223,align1=0,align2=0: 799809.00 (0.00%) 800000.00 (0.00%) 801756.00 length=16777231,align1=0,align2=3: 841184.00 (0.00%) 808525.00 (4.00%) 843775.00 length=16777247,align1=3,align2=0: 841166.00 (0.00%) 810147.00 (3.00%) 843147.00 length=16777279,align1=3,align2=5: 972569.00 (-16.00%) 808588.00 (4.00%) 843731.00 length=33554439,align1=0,align2=0: 1842240.00 (-0.01%) 1863590.00 (-1.17%) 1841990.00 length=33554447,align1=0,align2=3: 2103470.00 (-2.74%) 1919460.00 (6.25%) 2047440.00 length=33554463,align1=3,align2=0: 2075690.00 (-1.07%) 1930040.00 (6.02%) 2053720.00 length=33554495,align1=3,align2=5: 2110590.00 (-2.82%) 1924440.00 (6.25%) 2052650.00 Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: random ================================================================================ max-size=4096: 44061.90 (5.85%) 38568.20 (17.59%) 46799.90 max-size=8192: 42790.90 (5.27%) 38158.90 (15.52%) 45171.50 max-size=16384: 44912.10 (2.25%) 38710.40 (15.75%) 45945.00 max-size=32768: 43577.90 (1.23%) 37975.10 (13.93%) 44120.00 max-size=65536: 44375.50 (1.04%) 38474.20 (14.20%) 44840.60 * manual/tunables.texi (Tunable glibc.tune.cpu): Add falkor. * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add memcpy_falkor. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (MAX_IFUNC): Bump. (__libc_ifunc_impl_list): Add __memcpy_falkor. * sysdeps/aarch64/multiarch/memcpy.c: Likewise. * sysdeps/aarch64/multiarch/memcpy_falkor.S: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list): Add falkor. * sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_FALKOR): New macro.
* tunables, aarch64: New tunable to override cpuSiddhesh Poyarekar2017-06-301-0/+25
| | | | | | | | | | | | | | | | | | | | Add a new tunable (glibc.tune.cpu) to override CPU identification on aarch64. This is useful in two cases: one where it is desirable to pretend to be another CPU for purposes of testing or because routines written for that CPU are beneficial for specific workloads and second where the underlying kernel does not support emulation of MRS to get the MIDR of the CPU. * elf/dl-tunables.h (tunable_is_name): Move from... * elf/dl-tunables.c (is_name): ... here. (parse_tunables, __tunables_init): Adjust. * manual/tunables.texi: Document glibc.tune.cpu. * sysdeps/aarch64/dl-tunables.list: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (struct cpu_list): New type. (cpu_list): New list of CPU names and their MIDR. (get_midr_from_mcpu): New function. (init_cpu_features): Override MIDR if necessary.
* aarch64: Call all string function implementations in testsSiddhesh Poyarekar2017-06-301-4/+2
| | | | | | | | | | | The string function implementations implemented so far do not use any instructions that may deviate from standard aarch64, so it is possible for all routines to run on all armv8 hardware. Select all implementations in the benchmarks and tests. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Unconditionally select thunderx routine for testing.
* [AArch64] Add more cfi annotations to tlsdesc entry pointsSzabolcs Nagy2017-06-211-0/+70
| | | | | | | | Backtrace through _dl_tlsdesc_resolve_rela was broken because the offset of x30 from cfa was not in the debug info. Add enough annotation so backtracing from the dynamic linker through tlsdesc entry points works and the debugger shows registers correctly.
* [AArch64] Use hidden __GI__dl_argv in rtld startup codeSzabolcs Nagy2017-06-211-2/+2
| | | | | We rely on the symbol being locally defined so using extern symbol is not correct and the linker may complain about the relocations.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-08 18:12:29 +0000