about summary refs log tree commit diff
path: root/stdio-common/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* Fix missing redirects in testsuite targetsAndreas Schwab2017-08-071-2/+2
|
* vfprintf: Fix tst-vfprintf-mbs-prec and tst-vfprintf-user-typeFlorian Weimer2017-06-291-0/+1
|
* vfprintf: Add test case for multi-byte/wide strings and precisionFlorian Weimer2017-06-291-0/+1
|
* vfprintf: Add test case for user-defined types and format specifiersFlorian Weimer2017-06-291-1/+2
|
* Clean up conditionals for declaration of gets.Zack Weinberg2017-02-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gets has the dubious honor of being the only C89 library feature that has been completely removed from the current C and C++ standards. glibc follows suit by not declaring it in _GNU_SOURCE mode either, but it remains present in older compatibility modes. Internally, two test cases need to see stdio.h make the declaration, but all our internal code is of course compiled under _GNU_SOURCE. This is currently kludged by duplicating the gets declaration, fortify wrapper and all, in include/stdio.h. Also, the conditional in the public headers for deciding when to declare gets is complicated and repeated in two places. This patch adds a new macro to features.h that encapsulates the complicated rule for when to declare gets. stdio.h and bits/stdio2.h then simply test __GLIBC_USE (DEPRECATED_GETS), and instead of having a duplicate gets declaration in include/stdio.h, debug/tst-chk1.c and stdio-common/tst-gets.c can force gets to be declared. * include/features.h (__GLIBC_USE_DEPRECATED_GETS): New macro. * libio/stdio.h, libio/bits/stdio2.h: Condition gets on __GLIBC_USE (DEPRECATED_GETS). Update comments to indicate gets was removed from C++ in C++14. * include/stdio.h: Remove redundant declaration of gets. * debug/tst-chk1.c, stdio-common/tst-gets.c: Force gets to be declared, since we are testing it. * stdio-common/Makefile (tst-gets.c): Compile with -Wno-deprecated-declarations. * debug/Makefile (tst-chk1.c, tst-chk2.c, tst-chk3.c, tst-chk4.cc) (tst-chk5.cc, tst-chk6.cc, tst-lfschk1.c, tst-lfschk2.c) (tst-lfschk3.c, tst-lfschk4.cc, tst-lfschk5.cc, tst-lfschk6.cc): Compile with -Wno-deprecated-declarations.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* libio: Update internal fmemopen position after write (BZ #20005)Adhemerval Zanella2016-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current GLIBC fmemopen fails with a simple testcase: char buffer[500] = "x"; FILE *stream; stream = fmemopen(buffer, 500, "r+"); fwrite("fish",sizeof(char),5,stream); printf("pos-1:%ld\n",ftell(stream)); fflush(stream); printf("pos-2:%ld\n",ftell(stream)); It returns: pos-1:5 pos-2:0 Where it should return: pos-1:5 pos-2:5 This is due the internal write function does not correctly update the internal object position state and then the seek operation returns a wrong value. This patch fixes it. It fixes both BZ #20005 and BZ #19230 (marked as duplicated). A new test is added to check for such case. Tested on x86_64 and i686. * libio/fmemopen.c (fmemopen_write): Update internal position after write. * stdio-common/Makefile (tests): Add tst-fmemopen4.c. * stdio-common/tst-fmemopen4.c: New file..
* vfprintf: Fix memory with large width and precision [BZ #19931]Florian Weimer2016-04-251-5/+9
| | | | Free a previously allocated work buffer if it is not large enough.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Remove -fexceptions configure test.Joseph Myers2015-10-151-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a configure test for -fexceptions. This option was added in GCC 2.8, so the test is obsolete - and indeed plenty of code is using -fexceptions directly. This patch removes the configure test and makes all uses of $(exceptions) use -fexceptions directly. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_exceptions): Remove configure test. * configure: Regenerated. * sysdeps/arm/configure.ac (libc_cv_gcc_exceptions): Do not set variable. (exceptions): Likewise. * sysdeps/arm/configure: Regenerated. * config.make.in (exceptions): Remove variable. * Makeconfig (uses-callbacks): Use -fexceptions instead of $(exceptions). * debug/Makefile (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-fprintf.c): Likewise. (CFLAGS-printf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-vfscanf.c): Likewise. (CFLAGS-vfwscanf.c): Likewise. (CFLAGS-fscanf.c): Likewise. (CFLAGS-scanf.c): Likewise. (CFLAGS-isoc99_vfscanf.c): Likewise. (CFLAGS-isoc99_vscanf.c): Likewise. (CFLAGS-isoc99_fscanf.c): Likewise. (CFLAGS-isoc99_scanf.c): Likewise. * wcsmbs/Makefile (CFLAGS-isoc99_wscanf.c): Likewise. (CFLAGS-isoc99_fwscanf.c): Likewise. (CFLAGS-isoc99_vwscanf.c): Likewise. (CFLAGS-isoc99_vfwscanf.c): Likewise.
* Add dependencies on needed locales in each subdir tests (bug 18969)Andreas Schwab2015-10-121-0/+13
|
* BZ#18872: Don't conditionalize build rules for test program.Roland McGrath2015-10-081-2/+0
|
* Fix BZ #18872 -- memory leak in printf_positional.Paul Pluzhnikov2015-09-161-1/+16
|
* libio: fmemopen rewrite to POSIX complianceAdhemerval Zanella2015-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added a new fmemopen version, for glibc 2.22, that aims to be POSIX complaint. It fixes some long-stading glibc fmemopen issues, such as: * it changes the way fseek with SEEK_END works on fmemopen to seek relative to buffer size instead of first '\0'. This is default mode and 'b' opening mode does not change internal behavior (bz#6544). * fix apending opening mode to use as start position either first null byte of len specified in function call (bz#13152 and #13151). * remove binary option 'b' and internal different handling (bz#12836) * fix seek/SEE_END with negative values (bz#14292). A compatibility symbol is provided to with old behavior for older symbols version (2.2.5). * include/stdio.h (fmemopen): Remove hidden prototype. (__fmemopen): Add new hidden prototype. * libio/Makefile: Add oldfmemopen object. * libio/Versions [GLIBC_2.22]: Add new fmemopen symbol. * libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX compliance. * libio/oldfmemopen.c: New file: old fmemopen implementation for symbol compatibility. * stdio-common/Makefile [tests]: Add new tst-fmemopen3. * stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of fmemopen. * stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus on append and read mode. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add fmemopen. * sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* stdio-common/Makefile: readd bug26 testcaseAllan McRae2014-12-161-1/+1
| | | | This testcase was accidentally removed in commit a5357b7c.
* CVE-2012-3406: Stack overflow in vfprintf [BZ #16617]Jeff Law2014-12-151-1/+1
| | | | | | A larger number of format specifiers coudld cause a stack overflow, potentially allowing to bypass _FORTIFY_SOURCE format string protection.
* Eliminate -Wno-format from printf/scanf tests.Roland McGrath2014-12-111-8/+0
|
* Include LOCPATH in default test environment.Joseph Myers2014-06-041-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
* Use existing makefile variables for dependencies on glibc libraries.Joseph Myers2014-05-161-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
* Enumerate tests with special rules in tests-special variable.Joseph Myers2014-03-061-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
* Consistently include Makeconfig after defining subdir.Joseph Myers2014-02-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
* Generate .test-result files for tests with special rules.Joseph Myers2014-02-211-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
* Split up rules for tests that compare output with baselines.Joseph Myers2014-02-141-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch splits makefile rules that generate a file then run cmp to check the contents of that file into separate rules to generate and compare the file. This simplifies making those tests generate PASS / FAIL results, by removing the need to insert && between commands in the test so that a $(evaluate-test) call is reached. It also avoids the oddity of the .out file being an intermediate file rather than the final result generated, as noted for some of these tests in <https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>. In many cases, the rule to run the program was no longer needed because the default rules for running test programs on the host to generate a .out file sufficed. (I'm not asserting the commands run after this patch are *exactly* the same as before, simply that the rules did nothing special that appeared deliberate or relevant to anything about what the tests were testing. In cases where the rules redirected stderr as well as stdout, I left the existing rule's redirection in place to avoid changing what gets compared with the expected results.) It's clear there is a lot in common between the various -cmp.out rules and it might be possible in future to refactor them into more generic support for the case of comparing test output against a baseline. (Some baselines are *.exp, some *.expect, some directly embedded in the makefiles, and nptl/tst-cleanupx0.expect appears unused.) Tested x86_64. * elf/Makefile ($(objpfx)order.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)order-cmp.out. ($(objpfx)order-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out, $(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out, $(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and $(objpfx)tst-array5-static-cmp.out. ($(objpfx)tst-array1.out): Remove rule. ($(objpfx)tst-array1-cmp.out): New rule. ($(objpfx)tst-array1-static.out): Remove rule. ($(objpfx)tst-array1-static-cmp.out): New rule. ($(objpfx)tst-array2.out): Remove rule. ($(objpfx)tst-array2-cmp.out): New rule. ($(objpfx)tst-array3.out): Remove rule. ($(objpfx)tst-array3-cmp.out): New rule. ($(objpfx)tst-array4.out): Remove rule. ($(objpfx)tst-array4-cmp.out): New rule. ($(objpfx)tst-array5.out): Remove rule. ($(objpfx)tst-array5-cmp.out): New rule. ($(objpfx)tst-array5-static.out): Remove rule. ($(objpfx)tst-array5-static-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)order2-cmp.out. ($(objpfx)order2.out): Remove rule. ($(objpfx)order2-cmp.out): New rule. ($(objpfx)tst-initorder.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-initorder-cmp.out. ($(objpfx)tst-initorder-cmp.out): New rule. ($(objpfx)tst-initorder2.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-initorder2-cmp.out. ($(objpfx)tst-initorder2-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-unused-dep-cmp.out. ($(objpfx)tst-unused-dep-cmp.out): Do not run cmp. ($(objpfx)tst-unused-dep-cmp.out): New rule. * stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-setvbuf1-cmp.out. ($(objpfx)tst-setvbuf1.out): Do not run cmp. ($(objpfx)tst-setvbuf1-cmp.out): New rule. * string/Makefile [$(run-built-tests) = yes] (tests): Depend $(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out. ($(objpfx)tst-svc.out): Remove rule. ($(objpfx)tst-svc-cmp.out): New rule. nptl: * Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-cleanup0-cmp.out. ($(objpfx)tst-cleanup0-cmp.out): New rule.
* Remove indirection in stdio-common tests dependencies.Joseph Myers2014-02-121-4/+1
| | | | | | | | | | | | | | | stdio-common/Makefile has the tests target depend on two test output files indirectly through rules do-tst-unbputc and do-tst-printf. I see no reason for such an indirection, and everywhere else the tests just depend on the output files directly, so this patch removes the indirection. Tested x86_64. * stdio-common/Makefile (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. (tests): Depend directly on $(objpfx)tst-unbputc.out and $(objpfx)tst-printf.out.
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-011-1/+1
|
* Let tst-swscanf find its localeAndreas Schwab2013-10-291-0/+1
|
* Don't accept exp char without preceding digits in scanf float parsingAndreas Schwab2013-04-111-1/+1
|
* Add --enable-hardcoded-path-in-tests configure optionH.J. Lu2013-01-111-3/+3
|
* Update copyright notices with scripts/update-copyrights.Joseph Myers2013-01-021-1/+1
|
* Define and use $(run-built-tests).Joseph Myers2012-10-241-1/+1
|
* 2012-09-28 Andreas Schwab <schwab@linux-m68k.org>Jeff Law2012-09-281-0/+1
| | | | | | | | | | | | | | [BZ #6530] * stdio-common/vfprintf.c (process_string_arg): Revert 2000-07-22 change. 2011-09-28 Jonathan Nieder <jrnieder@gmail.com> * stdio-common/Makefile (tst-sprintf-ENV): Set environment for testcase. * stdio-common/tst-sprintf.c: Include <locale.h> (main): Test sprintf's handling of incomplete multibyte characters.
* Set "fail on error" mode directly in testsuite shell scriptsDmitry V. Levin2012-09-251-5/+5
|
* Make printf respect the rounding mode for decimal output (bug 5044).Joseph Myers2012-09-141-1/+8
|
* Clean up definition of _LIBC_REENTRANT and _IO_MTSAFE_IO.Roland McGrath2012-08-171-3/+1
|
* 2012-05-24 Jeff Law <law@redhat.com>Jeff Law2012-05-241-1/+2
| | | | | * stdio-common/Makefile (tests): Add bug25. * stdio-common/bug25.c: New test.
* [BZ #13691], Revert breakage of iconv() converter for TCVN-5712.Andreas Jaeger2012-05-211-2/+1
| | | | | | | | | | | | | | | | | | * iconvdata/tcvn5712-1.c (BODY for FROM_LOOP): Don't consider inptr and inend for must_buffer_ch. * wcsmbs/tst-mbsnrtowcs.c: Remove file. * wcsmbs/Makefile (tests): Remove tst-mbsnrtowcs. * stdio-common/Makefile (tests): Remove bug15. (bug15-ENV): Remove macro. * stdio-common/bug15.c: Remove, we do not support vi_VN.TCVN5712-1 anymore. localedata: * SUPPORTED: Remove vi_VN.TCVN/TCVN5712-1. * tst-strptime.c: Remove, we do not support vi_VN.TCVN5712-1 anymore. * Makefile (LOCALES): Remove vi_VN.TCVN5712-1 from list. (tests): Remove tst-strptime.
* Fix formatting of denormal IBM long double numbersAndreas Schwab2012-04-281-1/+1
|
* Install bits/stdio_lim.h in install-headers.Joseph Myers2012-03-091-6/+1
|
* Enhance fphex test.Marek Polacek2012-03-081-1/+1
|
* Remove distribute variable from MakefilesUlrich Drepper2012-03-071-3/+1
|
* Fix up long double fphex.Marek Polacek2012-03-061-1/+1
|
* 2012-03-02 Kees Cook <keescook@chromium.org>Kees Cook2012-03-051-1/+2
| | | | | | | | [BZ #13656] * stdio-common/vfprintf.c (vfprintf): Check for nargs overflow and possibly allocate from heap instead of stack. * stdio-common/bug-vfprintf-nargs.c: New file. * stdio-common/Makefile (tests): Add nargs overflow test.
* Replace FSF snail mail address with URLs.Paul Eggert2012-02-091-3/+2
|
* Add test for BZ 13114Ulrich Drepper2011-08-201-1/+1
|
* Fix allocation when handling positional parameters in printf.Petr Baudis2011-02-201-1/+1
|
* Fix grouping when rounding increases number of integer digits.Ulrich Drepper2011-01-121-2/+3
|
* * stdio-common/printf.h (struct printf_info): Add user element.Ulrich Drepper2009-04-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New types printf_arginfo_size_function, printf_va_arg_function. Declare register_printf_specifier, register_printf_modifier, register_printf_type. * stdio-common/printf-parse.h (struct printf_spec): Add size element. (union printf_arg): Add pa_user element. Adjust __printf_arginfo_table type. Add __printf_va_arg_table, __printf_modifier_table, __handle_registered_modifier_mb, and __handle_registered_modifier_wc declarations. * stdio-common/printf-parsemb.c: Recognize registered modifiers. If registered arginfo call failed try normal specifier. * stdio-common/printf-prs.c: Pass additional parameter to arginfo function. * stdio-common/Makefile (routines): Add reg-modifier and reg-type. * stdio-common/Versions: Export register_printf_modifier, register_printf_type, and register_printf_specifier for GLIBC_2.10. * stdio-common/reg-modifier.c: New file. * stdio-common/reg-type.c: New file. * stdio-common/reg-printf.c (__register_printf_specifier): New function. Mostly the old __register_printf_function function but uses locking and type of third parameter changed. (__register_printf_function): Implement using __register_printf_specifier. * stdio-common/vfprintf.c (vfprintf): Collect argument sizes in calls to arginfo functions. Allocate enough memory for user-defined types. Call new va_arg functions to get user-defined types. Try installed handlers even for existing format specifiers first.
* * locale/langinfo.h: nl_langinfo_l is in POSIX 2008.Ulrich Drepper2009-02-261-2/+3
| | | | | | | | | | | | | * locale/xlocale.h: Define locale_t type. * locale/locale.h: duplocale, freelocale, newlocale, uselocale are in POSIX 2008. Don't define locale_t here. * stdlib/monetary.h: strfmon_l is in POSIX 2008. * signal/signal.h: Declare psignal and psiginfo for POSIX 2008. * stdio-common/psiginfo.c: New file. * stdio-common/psiginfo-data.h: New file. * stdio-common/psiginfo-define.h: New file. * stdio-common/Makefile (routines): Add psiginfo. * stdio-common/Versions: Export psiginfo for GLIBC_2.10.
* * stdio-common/Makefile: Add rules to build and run tst-setvbuf1.Ulrich Drepper2008-07-081-2/+6
| | | | | * stdio-common/tst-setvbuf1.c: New file. * stdio-common/tst-setvbuf1.expect: New file.