about summary refs log tree commit diff
path: root/nptl/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]Florian Weimer2016-08-031-2/+6
| | | | | | | | | | | | | | | | | | | Instead, call malloc and explicitly align the pointer. There is no external location to store the original (unaligned) pointer, and this commit increases the allocation size to store the pointer at a fixed location relative to the TCB pointer. The manual alignment means that some space goes unused which was previously made available for subsequent allocations. However, in the TLS_DTV_AT_TP case, the manual alignment code avoids aligning the pre-TCB to the TLS block alignment. (Even while using memalign, the allocation had some unused padding in front.) This concludes the removal of memalign calls from the TLS code, and the new tst-tls3-malloc test verifies that only core malloc routines are used.
* Revert "Add pretty printers for the NPTL lock types"Siddhesh Poyarekar2016-07-111-1/+0
| | | | | | | | | | | | | | | | This reverts commit 62ce266b0b261def2c6329be9814ffdcc11964d6. The change is not mature enough because it needs the following fixes: 1. Redirect test output to a file like other tests 2. Eliminate the need to use a .gdbinit because distributions will break without it. I should have caught that but I was in too much of a hurry to get the patch in :/ 3. Feature checking during configure to determine things like minimum required gdb version, python-pexpect version, etc. to make sure that tests work correctly.
* Add pretty printers for the NPTL lock typesMartin Galvan2016-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were manually tested on both the gdb CLI and Eclipse CDT. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both a native build and a cross build using a Beaglebone Black, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. Hopefully this should be good to go in now. Thanks. ChangeLog: 2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com> * Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds if tests-need-hardcoded-path is defined. (all-subdirs): Add pretty-printers. * Makerules ($(py-const)): New rule. * Rules (others): Add $(py-const), if defined. * nptl/Makefile (gen-py-const-headers): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * pretty-printers/Makefile: Likewise. * pretty-printers/README: Likewise. * pretty-printers/test-condvar-attributes.c: Likewise. * pretty-printers/test-condvar-attributes.p: Likewise. * pretty-printers/test-condvar-printer.c: Likewise. * pretty-printers/test-condvar-printer.py: Likewise. * pretty-printers/test-mutex-attributes.c: Likewise. * pretty-printers/test-mutex-attributes.py: Likewise. * pretty-printers/test-mutex-printer.c: Likewise. * pretty-printers/test-mutex-printer.py: Likewise. * pretty-printers/test-rwlock-attributes.c: Likewise. * pretty-printers/test-rwlock-attributes.py: Likewise. * pretty-printers/test-rwlock-printer.c: Likewise. * pretty-printers/test-rwlock-printer.py: Likewise. * pretty-printers/test_common.py: Likewise. * scripts/gen-py-const.awk: Likewise.
* Add test case for bug 20263Andreas Schwab2016-07-071-1/+1
|
* Compile tst-cleanupx4 test with -fexceptionsH.J. Lu2016-06-291-3/+5
| | | | | | | | | | | | | | | | tst-cleanupx4 is linked with tst-cleanupx4.o and tst-cleanup4aux.o. Since tst-cleanupx4.o is compiled from tst-cleanup4.c with -fexceptions, tst-cleanup4aux.c should also be compiled with -fexceptions. Tested on x86-64 and i686. [BZ #18645] * nptl/Makefile (extra-test-objs): Add tst-cleanupx4aux.o. (test-extras): Add tst-cleanupx4aux. (CFLAGS-tst-cleanupx4aux.c): New. Set to -fexceptions. ($(objpfx)tst-cleanupx4): Replace tst-cleanup4aux.o with tst-cleanupx4aux.o. * nptl/tst-cleanupx4aux.c: New file.
* nptl: Add sendmmsg and recvmmsg cancellation testsAdhemerval Zanella2016-06-131-1/+2
| | | | | | | | | | | | | | | | | | | | | This patch adds cancellation tests for both sendmmsg and recvmmsg syscalls. Since for some system configuration (x86_64/i686 on older kernels and non-Linux platforms), the tests are added as two independent that report as unsupported if the syscall is not presented. Both new tests uses the already tst-cancel4.c code, which as moved to a common tst-cancel4-common{.c,h} files. Tested on x86_64 and i686. * nptl/Makefile (test): Add tst-cancel4_1 and tst-cancel4_2. * nptl/tst-cancel4-common.c: New file. * nptl/tst-cancel4-common.h: Likewise. * nptl/tst-cancel4.c: Move common definitions to tst-cancel4-common.{c,h} file. * nptl/tst-cancel4_1.c: New test. * nptl/tst-cancel4_2.c: New test.
* Revert {send,sendm,recv,recvm}msg conformance changesAdhemerval Zanella2016-06-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After some discussion in libc-alpha about this POSIX compliance fix, I see that GLIBC should indeed revert back to previous definition of msghdr and cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some reasons: * The possible issue where the syscalls wrapper add the compatibility layer is quite limited in scope and range. And kernel current also add some limits to the values on the internal msghdr and cmsghdr fields: - msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns EMSGSIZE. - msghdr::msg_controllen larger than INT_MAX returns ENOBUFS. * There is a small performance hit for recvmsg/sendmsg/recmmsg which is neglectable, but it is a big hit for sendmmsg since now instead of calling the syscall for the packed structure, GLIBC is calling multiple sendmsg. This defeat the very existence of the syscall. * It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt). However the fix is incomplete because it does add any runtime check since libsanitizer currently does not have any facility to intercept symbols with multiple version [2]. This, along with incorret dlsym/dlvsym return for versioned symbol due another bug [3], makes hard to interpose versioned symbols. Also, current approach of fixing GCC PR#71445 leads to half-baked solutions without versioned symbol interposing. This patch basically reverts commits 2f0dc39029ae08, 222c2d7f4357d66, af7f7c7ec8dea1. I decided to not revert abf29edd4a3918 (Adjust kernel-features.h defaults for recvmsg and sendmsg) mainly because it does not really address the POSIX compliance original issue and also adds some cleanups. Tested on x86, i386, s390, s390x, aarch64, and powerpc64le. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445 [2] https://github.com/google/sanitizers/issues/628 [3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932 * conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. * nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and ptw-oldsendmsg. (CFLAGS-oldrecvmsg.c): Remove rule. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-recvmsg.c): Add rule. (CFLAGS-sendmsg.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg. (CFLAGS-recvmsg.c): Remove rule. (CFLAGS-sendmsg.c): Likewise. (CFLAGS-oldrecvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-recvmmsg.c): Likewise. * sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert to kernel defined interfaces. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. (msghdr.__glibc_reserved1): Remove member. (msghdr.__glibc_reserved2): Likewise. (cmsghdr.__glibc_reserved1): Likewise. * sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file. * sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise. * sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous version. * sysdeps/unix/sysv/linux/recvmsg.c: Likewise. * sysdeps/unix/sysv/linux/sendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/sendmsg.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24): Remove recvmsg and sendmsg. * sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file * sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24 version for {recv,send,recm,sendm}msg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* network: Fix missing bits from {recv,send}{m}msg standard com,plianceAdhemerval Zanella2016-05-261-1/+1
| | | | | | | | | | | | | | | | | | | This patch fixes wrong/missing bits from the Fix {recv,send}{m}msg standard compliance (BZ#16919) patches: * nptl/Makefile sets CFLAGS-oldrecvfrom.c, but there's no such file as oldrecvfrom.c. It should be oldsendmsg.c as defined by ChangeLog. * sysdeps/unix/sysv/linux/hppa/Versions and sysdeps/unix/sysv/linux/i386/Versions list a symbol recvms instead of recvmsg at version GLIBC_2.24. * nptl/Makefile (CFLAGS-oldrecvfrom.c): Remove rule. (CFLAGS-oldsendmsg.c): Add rule. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Correct recvmsg symbol name. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* network: recvmsg and sendmsg standard compliance (BZ#16919)Adhemerval Zanella2016-05-251-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen to be of size int and socklen_t respectively. However Linux defines it as both size_t and for 64-bit it requires some adjustments to make the functions standard compliance. This patch fixes it by creating a temporary header and zeroing the pad fields for 64-bits architecture where size of size_t exceeds the size of the int. Also the new recvmsg and sendmsg implementation is only added on libc, with libpthread only containing a compat symbol. Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * conform/data/sys/socket.h-data (msghdr.msg_iovlen): Remove xfail- and change to correct expected type. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. * sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Fix expected POSIX assumption about the size. (msghdr.msg_controllen): Likewise. (msghdr.__glibc_reserved1): Likewise. (msghdr.__glibc_reserved2): Likewise. (cmsghdr.cmsg_len): Likewise. (cmsghdr.__glibc_reserved1): Likewise. * nptl/Makefile (libpthread-routines): Remove ptw-recvmsg and ptw-sendmsg. Add ptw-oldrecvmsg and ptw-oldsendmsg. (CFLAGS-sendmsg.c): Remove rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Add rule. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24): Add recvmsg and sendmsg. * sysdeps/unix/sysv/linux/aarch64/Version [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/arm/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/ia64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/x86_64/64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/x84_64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = socket)] (sysdep_headers): Add oldrecvmsg and oldsendmsg. (CFLAGS-sendmsg.c): Add rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/check_native.c (__check_native): Fix msghdr initialization. * sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise. * sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise. * sysdeps/unix/sysv/linux/oldrecvmsg.c: New file. * sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmsg.c (__libc_recvmsg): Adjust msghdr iovlen and controllen fields to adjust to POSIX specification. * sysdeps/unix/sysv/linux/sendmsg.c (__libc_sendmsg): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: New version and added recvmsg and sendmsg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdepe/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. Likewise. Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* Don't do lock elision on an error checking mutex (bug 17514)Andreas Schwab2016-01-251-1/+1
| | | | | | Error checking mutexes are not supposed to be subject to lock elision. That would defeat the error checking nature of the mutex because lock elision doesn't record ownership.
* New pthread_barrier algorithm to fulfill barrier destruction requirements.Torvald Riegel2016-01-151-2/+2
| | | | | | | | | | The previous barrier implementation did not fulfill the POSIX requirements for when a barrier can be destroyed. Specifically, it was possible that threads that haven't noticed yet that their round is complete still access the barrier's memory, and that those accesses can happen after the barrier has been legally destroyed. The new algorithm does not have this issue, and it avoids using a lock internally.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Add -std=gnu11 and -std=c11 NPTL initializers tests.Joseph Myers2015-10-271-1/+4
| | | | | | | | | | | | | | NPTL has tests that initializers work with various -std= options. Now that we can rely on -std=gnu11 and -std=c11 being available, this patch adds versions of those tests for those options. Tested for x86_64 and x86 (testsuite). * nptl/tst-initializers1-c11.c: New file. * nptl/tst-initializers1-gnu11.c: Likewise. * nptl/Makefile (tests): Add these new tests. (CFLAGS-tst-initializers1-c11.c): New variable. (CFLAGS-tst-initializers1-gnu11.c): Likewise.
* Remove sysdeps/nptl/configure.ac.Joseph Myers2015-10-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/nptl/configure.ac tests for forced unwind support and the C cleanup attribute, giving errors if either is unsupported. It does nothing beyond running those two tests. Both the attribute, and _Unwind_GetCFA which is used in the forced unwind test, were added in GCC 3.3. Thus these tests are long obsolete, and this patch removes the configure fragment running them, along with associated conditionals. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * sysdeps/nptl/configure.ac: Remove file. * sysdeps/nptl/configure: Remove generated file. * configure.ac (libc_cv_forced_unwind): Do not substitute. * configure: Regenerated. * config.h.in (HAVE_FORCED_UNWIND): Remove #undef. * config.make.in (have-forced-unwind): Remove variable. * nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional. * nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise. * nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise. (__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code. * nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional. * sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional.
* nptl: Add NPTL cases for cancellation failures casesAdhemerval Zanella2015-10-091-0/+1
| | | | | | | | | | | | This patch pthread cancellation tests to check for failures cases wherer the syscall cancel wrapper should both set the error and the errno values. Tested on i686, x86_64, x32, powerpc64le, and aarch64. * nptl/Makefile (tests): Add tst-cancel26.c and tst-cancel27.c. * nptl/tst-cancel26.c: New file. * nptl/tst-cancel27.c: Likewise.
* Add a test case for C++11 thread_local supportFlorian Weimer2015-10-061-1/+8
| | | | | This requires a C++ compiler with thread_local support, and a new configure check is needed.
* Use IE model for static variables in libc.so, libpthread.so and rtldSiddhesh Poyarekar2015-07-241-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently introduced TLS variables in the thread-local destructor implementation (__cxa_thread_atexit_impl) used the default GD access model, resulting in a call to __tls_get_addr. This causes a deadlock with recent changes to the way TLS is initialized because DTV allocations are delayed and hence despite knowing the offset to the variable inside its TLS block, the thread has to take the global rtld lock to safely update the TLS offset. This causes deadlocks when a thread is instantiated and joined inside a destructor of a dlopen'd DSO. The correct long term fix is to somehow not take the lock, but that will need a lot deeper change set to alter the way in which the big rtld lock is used. Instead, this patch just eliminates the call to __tls_get_addr for the thread-local variables inside libc.so, libpthread.so and rtld by building all of their units with -mtls-model=initial-exec. There were concerns that the static storage for TLS is limited and hence we should not be using it. Additionally, dynamically loaded modules may result in libc.so looking for this static storage pretty late in static binaries. Both concerns are valid when using TLSDESC since that is where one may attempt to allocate a TLS block from static storage for even those variables that are not IE. They're not very strong arguments for the traditional TLS model though, since it assumes that the static storage would be used sparingly and definitely not by default. Hence, for now this would only theoretically affect ARM architectures. The impact is hence limited to statically linked binaries that dlopen modules that in turn load libc.so, all that on arm hardware. It seems like a small enough impact to justify fixing the larger problem that currently affects everything everywhere. This still does not solve the original problem completely. That is, it is still possible to deadlock on the big rtld lock with a small tweak to the test case attached to this patch. That problem is however not a regression in 2.22 and hence could be tackled as a separate project. The test case is picked up as is from Alex's patch. This change has been tested to verify that it does not cause any issues on x86_64. ChangeLog: [BZ #18457] * nptl/Makefile (tests): New test case tst-join7. (modules-names): New test case module tst-join7mod. * nptl/tst-join7.c: New file. * nptl/tst-join7mod.c: New file. * Makeconfig (tls-model): Pass -ftls-model=initial-exec for all translation units in libc.so, libpthread.so and rtld.
* Avoid C++ tests when the C++ cannot be linkedAdhemerval Zanella2015-07-141-1/+1
| | | | | | | | | * elf/Makefile [ifeq (yes,$(build-shared)) (tests)] (tst-nodelete): Add iff $CXX is set. [ifeq (yes,$(build-shared)) (modules-names)] (tst-nodelete-rtldmod): Likewise. (tst-nodelete-zmodiff): Likewise. * nptl/Makefile [[ifeq (,$(CXX))] (tests-unsupported)]: Add tst-once5.
* The patch committed to fix bug #18435 caused regressions on aarch64Martin Sebor2015-07-091-0/+4
| | | | | | | | | | | | | and also powerpc64 and powerpc64le. See the discussion in the thread below for details. This change reverts the problematic bits leaving the added test in place and marking XFAIL in anticipation of fixing the bug in the near future. https://sourceware.org/ml/libc-alpha/2015-07/msg00141.html [BZ #18435] * nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop): Revert commit ed225df3ad9cbac3c22ec3f0fbbed1f9c61d1c54. * nptl/Makefile (test-xfail-tst-once5): Define.
* The C++ 2011 std::call_once function is specified to allowMartin Sebor2015-07-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | the initialization routine to exit by throwing an exception. Such an execution, termed exceptional, requires call_once to propagate the exception to its caller. A program may contain any number of exceptional executions but only one returning execution (which, if it exists, must be the last execution with the same once flag). On POSIX systems such as Linux, std::call_once is implemented in terms of pthread_once. However, as discussed in libstdc++ bug 66146 - "call_once not C++11-compliant on ppc64le," GLIBC's pthread_once hangs when the initialization function exits by throwing an exception on at least arm and ppc64 (though apparently not on x86_64). This effectively prevents call_once from conforming to the C++ requirements since there doesn't appear to be a thread-safe way to work around this problem in libstdc++. This patch changes pthread_once to handle gracefully init functions that exit by throwing exceptions. It was successfully tested on ppc64, ppc64le, and x86_64. [BZ #18435] * nptl/Makefile: Add tst-once5.cc. * nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop): Remove macro redefinitions. * nptl/tst-once5.cc: New test.
* nptl: restore .interp section in libpthread.soGleb Fotengauer-Malinovskiy2015-06-101-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 02657da2cf4457804ed938ee08b8316249126444, .interp section was removed from libpthread.so. This led to an error: $ /lib64/libpthread.so.0 Native POSIX Threads Library by Ulrich Drepper et al Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Forced unwind support included. Segmentation fault (gdb) bt #0 0x00000000000055a6 in _exit@plt () Unfortunately, there is no way to add a regression test for the bug because .interp specifies the path to dynamic linker of the target system. [BZ #18479] * nptl/pt-interp.c: New file. * nptl/Makefile (libpthread-routines, libpthread-shared-only-routines): Add pt-interp. [$(build-shared) = yes] ($(objpfx)pt-interp.os): Depend on $(common-objpfx)runtime-linker.h.
* Fix missing wake-ups in pthread_rwlock_rdlock.Torvald Riegel2015-06-041-1/+1
| | | | | | | | | This adds wake-ups that would be missing if assuming that for a non-writer-preferring rwlock, if one thread has acquired a rdlock and does not release it, another thread will eventually acquire a rdlock too despite concurrent write lock acquisition attempts. BZ 14958 is about supporting this assumption. Strictly speaking, this isn't a valid test case, but nonetheless worth supporting (see comment 7 of BZ 14958).
* Fix lost wake-up when pthread_rwlock_timedrwlock times out.Torvald Riegel2015-06-041-0/+1
| | | | | | | | | | If we set up a rwlock to prefer writers (and disallow recursive rdlock acquisitions), then readers will block for writers that are blocked to acquire the lock (otherwise, readers could constantly enter and exit, and the writer would never get the lock). However, the existing implementation did not wake such readers when the writer timed out. This patch adds the missing wake-up. There's no similar case for writers being blocked on readers.
* Split timed-wait functions out of nptl/lowlevellock.c.Roland McGrath2015-05-261-0/+1
|
* Remove socket.S implementationAdhemerval Zanella2015-05-221-0/+6
| | | | | | | | | | | | | | | This patch removes the socket.S implementation for all ports and replace it by a C implementation using socketcall. For ports that implement the syscall directly, there is no change. The patch idea is to simplify the socket function implementation that uses the socketcall to be based on C implemetation instead of a pseudo assembly implementation with arch specific parts. The patch then remove the assembly implementatation for the ports which uses socketcall (i386, microblaze, mips, powerpc, sparc, m68k, s390 and sh). I have cross-build GLIBC for afore-mentioned ports and tested on both i386 and ppc32 without regressions.
* BZ#18434: Fix sem_post EOVERFLOW check for [!__HAVE_64B_ATOMICS].Roland McGrath2015-05-191-0/+1
|
* Let tests result in UNSUPPORTED; use that for unbuildable C++ casesRoland McGrath2015-03-101-9/+9
|
* Avoid C++ tests when the C++ cannot be linked.Roland McGrath2015-03-041-4/+9
|
* Filter out PTHREAD_MUTEX_NO_ELISION_NP bit in pthread_mutexattr_gettype (BZ ↵Andreas Schwab2015-02-121-1/+1
| | | | | | | | #15790) pthread_mutexattr_settype adds PTHREAD_MUTEX_NO_ELISION_NP to kind, which is an internal flag that pthread_mutexattr_gettype shouldn't expose, since pthread_mutexattr_settype wouldn't accept it.
* NPTL: Build tests using clone directly only for Linux.Roland McGrath2015-02-061-7/+2
|
* Fix semaphore destruction (bug 12674).Carlos O'Donell2015-01-211-3/+2
| | | | | | | | | | | | | This commit fixes semaphore destruction by either using 64b atomic operations (where available), or by using two separate fields when only 32b atomic operations are available. In the latter case, we keep a conservative estimate of whether there are any waiting threads in one bit of the field that counts the number of available tokens, thus allowing sem_post to atomically both add a token and determine whether it needs to call futex_wake. See: https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
* Add -Wno-trampolines as neededRichard Henderson2015-01-081-0/+1
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Revert "Use pragmas rather than makefiles for necessary options for unwind ↵Roland McGrath2014-12-161-0/+3
| | | | | | code." This reverts commit c324fcfe75c3976ae0b16943df00710e1d0d74f7.
* Use pragmas rather than makefiles for necessary options for unwind code.Roland McGrath2014-12-161-3/+0
|
* NPTL: Refactor named semaphore code to use shm-directory.hRoland McGrath2014-12-121-0/+1
|
* Resize DTV if the current DTV isn't big enoughH.J. Lu2014-11-281-2/+15
| | | | | | | | | | | | | | | | | | | | | | | This patch changes _dl_allocate_tls_init to resize DTV if the current DTV isn't big enough. Tested on X86-64, x32 and ia32. [BZ #13862] * elf/dl-tls.c: Include <atomic.h>. (oom): Remove #ifdef SHARED/#endif. (_dl_static_dtv, _dl_initial_dtv): Moved before ... (_dl_resize_dtv): This. Extracted from _dl_update_slotinfo. (_dl_allocate_tls_init): Resize DTV if the current DTV isn't big enough. (_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV. * nptl/Makefile (tests): Add tst-stack4. (modules-names): Add tst-stack4mod. ($(objpfx)tst-stack4): New. (tst-stack4mod.sos): Likewise. ($(objpfx)tst-stack4.out): Likewise. ($(tst-stack4mod.sos)): Likewise. (clean): Likewise. * nptl/tst-stack4.c: New file. * nptl/tst-stack4mod.c: Likewise.
* Test that pthread_create diagnoses invalid scheduling parameters.Roland McGrath2014-11-191-1/+2
|
* Remove NOT_IN_libc definition for pthread_atforkSiddhesh Poyarekar2014-08-211-2/+0
| | | | | | | | pthread_atfork is already built in an extra-libs context, which gives it NOT_IN_libc in its CPPFLAGS. Adding the same definition to CFLAGS is pointless. Verified that the code is unchanged on x86_64.
* nptl: Fix abort in case of set*id failure [BZ #17135]Florian Weimer2014-07-111-0/+1
| | | | | | | | | | If a call to the set*id functions fails in a multi-threaded program, the abort introduced in commit 13f7fe35ae2b0ea55dc4b9628763aafdc8bdc30c was triggered. We address by checking that all calls to set*id on all threads give the same result, and only abort if we see success followed by failure (or vice versa).
* Get rid of nptl/sysdeps/ entirely!Roland McGrath2014-07-071-3/+10
|
* Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers2014-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
* New test for pthread_spin_lock (bug 16882)Guo Yixuan2014-06-031-1/+1
| | | | | * nptl/tst-spin4.c: New test. * nptl/Makefile (tests): Add tst-spin4.
* Use existing makefile variables for dependencies on glibc libraries.Joseph Myers2014-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
* Check for syscall error in the SETXID implementation in NPTL (bug 13347).Florian Weimer2014-04-011-1/+2
| | | | | | | | At this point, we can only abort the process because we have already switched credentials on other threads. Returning an error would still leave the process in an inconsistent state. The new xtest needs root privileges to run.
* Make tests consistently use *.out output files.Joseph Myers2014-03-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
* Enumerate tests with special rules in tests-special variable.Joseph Myers2014-03-061-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
* Fix fallout from Joseph's untested Makeconfig change.Roland McGrath2014-02-281-1/+1
|
* Consistently include Makeconfig after defining subdir.Joseph Myers2014-02-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
* Generate .test-result files for tests with special rules.Joseph Myers2014-02-211-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-08-18 04:10:44 +0000