about summary refs log tree commit diff
path: root/math
Commit message (Collapse)AuthorAgeFilesLines
* Don't use INTDEF with __ldexpf (bug 14132).Joseph Myers2014-10-211-1/+0
| | | | | | | | | | | | Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this patch removes the use of INTDEF for __ldexpf. As far as I can tell, the resulting alias is completely unused. Tested for x86_64 that stripped installed shared libraries are unchanged by this patch. [BZ #14132] * math/s_ldexpf.c (__ldexpf): Do not use INTDEF.
* stdlib/tst-strtod-round.c: Fix build on ARMWill Newton2014-09-301-1/+2
| | | | | | | | | | | | | | | | | Building this test on ARM fails because the prototypes for the long double variants of the math functions are unavailable. Add an additional include guard to math.h that enables long double math function declarations if _LIBC_TEST is defined and define _LIBC_TEST in stdlib/tst-strtod-round.c. ChangeLog: 2014-09-30 Will Newton <will.newton@linaro.org> * math/math.h: Define long double math functions if _LIBC_TEST is defined. * stdlib/tst-strtod-round.c: Define _LIBC_TEST.
* Revert to defining __extern_inline only for gcc-4.3+ (BZ #17266)Siddhesh Poyarekar2014-09-161-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may not be sufficient since those flags were added during initial support for C99 inlining semantics. There is also a problem with always defining __extern_inline and __extern_always_inline, since it enables inline wrapper functions even when GNU inlining semantics are not guaranteed. This, along with the possibility of such wrappers using redirection (btowc for example) could result in compiler generating an infinitely recusrive call to the function. In fact it was such a recursion that led to this code being written the way it was; see: https://bugzilla.redhat.com/show_bug.cgi?id=186410 The initial change was to fix bugs 14530 and 13741, but they can be resolved by checking if __fortify_function and/or __extern_always_inline are defined, as it has been done in this patch. In addition, I have audited uses of __extern_always_inline to make sure that none of the uses result in compilation errors. There is however a regression in this patch for llvm, since it reverts the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ definition imply proper extern inline semantics. 2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com> Jakub Jelinek <jakub@redhat.com> [BZ #17266] * libio/stdio.h: Check definition of __fortify_function instead of __extern_always_inline to include bits/stdio2.h. * math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also check if __extern_always_inline is defined. [__USE_MISC || __USE_XOPEN]: Likewise. [__USE_ISOC99] Likewise. * misc/sys/cdefs.h (__fortify_function): Define only if __extern_always_inline is defined. [!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining __extern_always_inline and __extern_inline only for g++-4.3 and newer or a compatible gcc.
* Fix fallback fesetenv and feupdateenv on FE_NOMASK_ENV (bug 17088).Joseph Myers2014-07-172-0/+8
| | | | | | | | | | | | | | This patch fixes bug 17088, fallback fesetenv and feupdateenv not giving an error for an FE_NOMASK_ENV argument when it requires traps to be enabled. (This is the bug tested for by test-fenv-return.c.) Tested mips64 soft-float. [BZ #17088] * math/fesetenv.c (__fesetenv) [FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Return 1 for FE_NOMASK_ENV. * math/feupdateenv.c (__feupdateenv) [FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Likewise.
* Fix yn overflow handling in non-default rounding modes (bug 16561, bug 16562).Joseph Myers2014-06-271-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bugs 16561 and 16562, bad results of yn in overflow cases in non-default rounding modes, both because an intermediate overflow in the recurrence does not get detected if the result is not an infinity and because an overflowing result may occur in the wrong sign. The fix is to set FE_TONEAREST mode internally for the parts of the function where such overflows can occur (which includes the call to y1 - where yn is used to compute a Bessel function of order -1, negating the result of y1 isn't correct for overflowing results in directed rounding modes) and then compute an overflowing value in the original rounding mode if the to-nearest result was an infinity. Tested x86_64 and x86 and ulps updated accordingly. Also tested for mips64 and powerpc32 to test the ldbl-128 and ldbl-128ibm changes. (The tests for these bugs were added in my previous y1 patch, so the only thing this patch has to do with the testsuite is enable yn testing in all rounding modes.) [BZ #16561] [BZ #16562] * sysdeps/ieee754/dbl-64/e_jn.c: Include <float.h>. (__ieee754_yn): Set FE_TONEAREST mode internally and then recompute overflowing results in original rounding mode. * sysdeps/ieee754/flt-32/e_jnf.c: Include <float.h>. (__ieee754_ynf): Set FE_TONEAREST mode internally and then recompute overflowing results in original rounding mode. * sysdeps/ieee754/ldbl-128/e_jnl.c: Include <float.h>. (__ieee754_ynl): Set FE_TONEAREST mode internally and then recompute overflowing results in original rounding mode. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Include <float.h>. (__ieee754_ynl): Set FE_TONEAREST mode internally and then recompute overflowing results in original rounding mode. * sysdeps/ieee754/ldbl-96/e_jnl.c: Include <float.h>. (__ieee754_ynl): Set FE_TONEAREST mode internally and then recompute overflowing results in original rounding mode. * sysdeps/i386/fpu/fenv_private.h [!__SSE2_MATH__] (libc_feholdsetround_ctx): New macro. * math/libm-test.inc (yn_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps : Likewise.
* Fix exp10 spurious underflows (bug 16560).Joseph Myers2014-06-252-0/+684
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes spurious underflows from exp10 for arguments near 0 (part of bug 16560; that bug also includes spurious underflows from exp2, which are not fixed by this patch). The problem is underflows in the internal computation converting the exp10 argument to arguments for exp (with extra precision), and the fix is simply to return 1 early for arguments near enough to 0 (just as arguments with large enough magnitude have their own overflow / underflow logic at the start of the function). Tested x86_64 and x86 and ulps updated accordingly; also tested for powerpc32 and mips64 to validate the ldbl-128ibm and ldbl-128 changes. [BZ #16560] * sysdeps/ieee754/dbl-64/e_exp10.c (__ieee754_exp10): Return 1 for arguments close to 0. * sysdeps/ieee754/ldbl-128/e_exp10l.c (__ieee754_exp10l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (__ieee754_exp10l): Likewise. * math/auto-libm-test-in: Add more tests of exp10. * math/auto-libm-test-out: Regenerated. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* Fix x86/x86_64 expm1l spurious underflow exceptions (bug 16539).Joseph Myers2014-06-242-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16539, spurious underflow exceptions from x86 / x86-64 expm1l. The problem is that the computation of a base-2 exponent with extra precision involves spurious underflows for arguments that are small but not subnormal, so a check is added to just return the argument in those cases. (If the argument *is* subnormal, underflowing is correct and the existing code will always underflow, so it suffices to keep using the existing code in that case; some expm1 implementations have a bug (bug 16353) with missing underflow exceptions, but I don't think there's such a bug in this particular version.) Tested x86_64 and x86; no ulps updates needed. (auto-libm-test-out diffs omitted below.) [BZ #16539] * sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Just return the argument for normal arguments with exponent below -64. * sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Likewise. * math/auto-libm-test-in: Add another test of expm1. * math/auto-libm-test-out: Regenerated.
* Fix ldbl-128 erfl spurious underflows (bug 16287).Joseph Myers2014-06-242-0/+304
| | | | | | | | | | | | | | | | | | | | This patch fixes bug 16287, spurious underflows from ldbl-128 erfl arising from it calling erfcl for arguments with absolute value at least 1.0, although for large positive arguments erfcl correctly underflows but erfl shouldn't. The fix is simply to avoid calling erfcl, and just return 1, for arguments above a cut-off large enough that erfl correctly rounds to-nearest as 1 but not so large that erfcl underflows. Tested mips64. Also tested x86_64 and x86 to confirm the new tests (taken from the tests of erfc) don't cause any problems there; no ulps updates needed. [BZ #16287] * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Return 1 without calling __erfcl for arguments at least 16. * math/auto-libm-test-in: Add more tests of erf. * math/auto-libm-test-out: Regenerated.
* Fix cosh spurious underflows from expm1 (bug 16354), inaccurate results near ↵Joseph Myers2014-06-232-321/+424
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 0 (bug 17061). This patch fixes bug 16354, spurious underflows from cosh when a tiny argument is passed to expm1 and expm1 correctly underflows although the final result of cosh should be 1. As noted in that bug, some cases are latent because of expm1 implementations not raising underflow (bug 16353), but all the implementations are fixed similarly. They already contained checks for tiny arguments, but the checks were too late to avoid underflow from expm1 (although they would avoid underflow from subsequent squaring of the result of expm1); they are moved before the expm1 calls. The thresholds used for considering arguments tiny are not particularly consistent in how they relate to the precision of the floating-point format in question. They are, however, all sufficient to ensure that the round-to-nearest result of cosh is indeed 1 below the threshold (although sometimes they are smaller than necessary). But the previous logic did not return 1, but the previously computed 1 + expm1(abs(x)) value. And the thresholds in the ldbl-128 and ldbl-128ibm code (0x1p-71L - I suspect 0x3f8b was intended in the code instead of 0x3fb8 - and (roughly) 0x1p-55L) are not sufficient for that value to be 1. So by moving the test for tiny arguments, and consequently returning 1 directly now the expm1 value hasn't been computed by that point, this patch also fixes bug 17061, the (large number of ulps) inaccuracy for small arguments in those implementations. Tests for that bug are duly added. Tested x86_64 and x86 and ulps updated accordingly. Also tested for mips64 and powerpc32 to validate the ldbl-128 and ldbl-128ibm changes. [BZ #16354] [BZ #17061] * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Check for small arguments before calling __expm1. * sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Check for small arguments before calling __expm1f. * sysdeps/ieee754/ldbl-128/e_coshl.c (__ieee754_coshl): Check for small arguments before calling __expm1l. * sysdeps/ieee754/ldbl-128ibm/e_coshl.c (__ieee754_coshl): Likewise. * sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise. * math/auto-libm-test-in: Add more cosh tests. Do not allow spurious underflow for some cosh tests. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Set errno for y1 overflow (bug 17050).Joseph Myers2014-06-232-0/+1761
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 17050, missing errno setting for y1 overflow (for small positive arguments). An appropriate check is added for overflow directly in the __ieee754_y1 implementation, similar to the check present for yn (doing it there rather than in the wrapper also avoids yn needing to repeat the check when called for order 1 or -1 and it uses __ieee754_y1). Tested x86_64 and x86; no ulps update needed. Also tested for mips64 to verify the ldbl-128 fix (the ldbl-128ibm code just #includes the ldbl-128 file). [BZ #17050] * sysdeps/ieee754/dbl-64/e_j1.c: Include <errno.h>. (__ieee754_y1): Set errno if return value overflows. * sysdeps/ieee754/flt-32/e_j1f.c: Include <errno.h>. (__ieee754_y1f): Set errno if return value overflows. * sysdeps/ieee754/ldbl-128/e_j1l.c: Include <errno.h>. (__ieee754_y1l): Set errno if return value overflows. * sysdeps/ieee754/ldbl-96/e_j1l.c: Include <errno.h>. (__ieee754_y1l): Set errno if return value overflows. * math/auto-libm-test-in: Add more tests of y0, y1 and yn. * math/auto-libm-test-out: Regenerated.
* Test cpow in all rounding modes.Joseph Myers2014-06-235-135/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix pow overflow in non-default rounding modes (bug 16315).Joseph Myers2014-06-233-67/+2736
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16315, bad pow handling of overflow/underflow in non-default rounding modes. Tests of pow are duly converted to ALL_RM_TEST to run all tests in all rounding modes. There are two main issues here. First, various implementations compute a negative result by negating a positive result, but this yields inappropriate overflow / underflow values for directed rounding, so either overflow / underflow results need recomputing in the correct sign, or the relevant overflowing / underflowing operation needs to be made to have a result of the correct sign. Second, the dbl-64 implementation sets FE_TONEAREST internally; in the overflow / underflow case, the result needs recomputing in the original rounding mode. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16315] * sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Ensure possibly overflowing or underflowing operations take place with sign of result. * sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Likewise. * sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise. * sysdeps/ieee754/dbl-64/e_pow.c: Include <math.h>. (__ieee754_pow): Recompute overflowing and underflowing results in original rounding mode. * sysdeps/x86/fpu/powl_helper.c: Include <stdbool.h>. (__powl_helper): Allow negative argument X and scale negated value as needed. Avoid passing value outside [-1, 1] to f2xm1. * sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Ensure possibly overflowing or underflowing operations take place with sign of result. * sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]: Include <math.h>. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (pow_test): Use ALL_RM_TEST. (pow_tonearest_test_data): Remove. (pow_test_tonearest): Likewise. (pow_towardzero_test_data): Likewise. (pow_test_towardzero): Likewise. (pow_downward_test_data): Likewise. (pow_test_downward): Likewise. (pow_upward_test_data): Likewise. (pow_test_upward): Likewise. (main): Don't call removed functions. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* [BZ #6803] Set errno for scalbln, scalbnStefan Liebler2014-06-205-65/+177
| | | | | | | | | | | Errno is not set and the testcases will fail. Now the scalbln-aliases are removed in i386/m68 and the wrappers are used when calling the scalbln-functions. On ia64 only scalblnf has its own implementation. For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus the wrappers are needed, too.
* PowerPC: Fix nearbyintl failure for few inputsRajalakshmi Srinivasaraghavan2014-06-171-0/+8
| | | | | | | | This patch fixes few failures in nearbyintl() where the fraction part is close to 0.5.i The new tests added report few extra failures in nearbyint_downward and nearbyint_towardzero which is a known issue. Fixes #17031.
* Add FE_NOMASK_ENV return value test.Wilco2014-06-102-1/+124
|
* Fix log2 (1) in round-downward mode (bug 17042).Joseph Myers2014-06-101-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | As with other issues of this kind, bug 17042 is log2 (1) wrongly returning -0 instead of +0 in round-downward mode because of implementations effectively in terms of log1p (x - 1). This patch fixes the issue in the same way used for log and log10. Tested x86_64 and x86 and ulps updated accordingly. Also tested for mips64 to confirm a fix was needed for ldbl-128 and to validate that fix (also applied to ldbl-128ibm since that version of log2l is essentially the same as the ldbl-128 one). [BZ #17042] * sysdeps/i386/fpu/e_log2.S (__ieee754_log2): Take absolete value when x - 1 is zero. * sysdeps/i386/fpu/e_log2f.S (__ieee754_log2f): Likewise. * sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Return 0.0L for an argument of 1.0L. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Take absolute value when x - 1 is zero. * math/libm-test.inc (log2_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers2014-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
* Fix log10 (1) in round-downward mode (bug 16977).Joseph Myers2014-05-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | As with various other issues of this kind, bug 16977 is log10 (1) wrongly returning -0 rather than +0 in round-downward mode because of an implementation effectively in terms of log1p (x - 1). This patch fixes the issue in the same way used for log. Tested x86_64 and x86 and ulps updated accordingly. Also tested for mips64 to confirm a fix was needed for ldbl-128 and to validate that fix (also applied to ldbl-128ibm since that version of logl is essentially the same as the ldbl-128 one). [BZ #16977] * sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute value when x - 1 is zero. * sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise. * sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise. * sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return 0.0L for an argument of 1.0L. * sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise. * sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute value when x - 1 is zero. * math/libm-test.inc (log10_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Use existing makefile variables for dependencies on glibc libraries.Joseph Myers2014-05-161-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
* Fix log1pl (LDBL_MAX) in FE_UPWARD mode (bug 16564).Joseph Myers2014-05-142-0/+272
| | | | | | | | | | | | | | | | | | | | | | | Bug 16564 is spurious overflow of log1pl (LDBL_MAX) in FE_UPWARD mode, resulting from log1pl adding 1 to its argument (for arguments not close to 0), which overflows in that mode. This patch fixes this by avoiding adding 1 to large arguments (precisely what counts as large depends on the floating-point format). Tested x86_64 and x86, and spot-checked log1pl tests on mips64 and powerpc64. [BZ #16564] * sysdeps/i386/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive arguments with exponent 65 or above. * sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Do not add 1 to arguments 0x1p113L or above. * sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Do not add 1 to arguments 0x1p107L or above. * sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive arguments with exponent 65 or above. * math/auto-libm-test-in: Add more tests of log1p. * math/auto-libm-test-out: Regenerated.
* Fix cacos (+Inf + finite*i) in round-downward mode (bug 16928).Joseph Myers2014-05-144-3/+7
| | | | | | | | | | | | | | | | | | | | | According to C99/C11 Annex G, cacos applied to a value with real part +Inf and finite imaginary part should produce a result with real part +0. glibc wrongly produces a result with real part -0 in FE_DOWNWARD mode. This patch fixes this by checking for zero results in the relevant case of non-finite arguments (where there should never be a result with -0 real part), and converts the tests of cacos to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16928] * math/s_cacos.c (__cacos): Ensure zero real part of result from non-finite arguments is +0. * math/s_cacosf.c (__cacosf): Likewise. * math/s_cacosl.c (__cacosl): Likewise. * math/libm-test.inc (cacos_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix acosh (1) in round-downward mode (bug 16927).Joseph Myers2014-05-141-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to C99 and C11 Annex F, acosh (1) should be +0 in all rounding modes. However, some implementations in glibc wrongly return -0 in round-downward mode (which is what you get if you end up computing log1p (-0), via 1 - 1 being -0 in round-downward mode). This patch fixes the problem implementations, by correcting the test for an exact 1 value in the ldbl-96 implementation to allow for the explicit high bit of the mantissa, and by inserting fabs instructions in the i386 implementations; tests of acosh are duly converted to ALL_RM_TEST. I believe all the other sysdeps/ieee754 implementations are already OK (I haven't checked the ia64 versions, but if buggy then that will be obvious from the results of test runs after this patch is in). Tested x86_64 and x86 and ulps updated accordingly. [BZ #16927] * sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): Use fabs on x-1 value. * sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise. * sysdeps/i386/fpu/e_acoshl.S (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Correct for explicit high bit of mantissa when testing for argument equal to 1. * math/libm-test.inc (acosh_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix erf underflow handling near 0 (bug 16516).Joseph Myers2014-05-142-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 16516 reports spurious underflows from erf (for all floating-point types), when the result is close to underflowing but does not actually underflow. erf (x) is about (2/sqrt(pi))*x for x close to 0, so there are subnormal arguments for which it does not underflow. The various implementations do (x + efx*x) (for efx = 2/sqrt(pi) - 1), for greater accuracy than if just using a single multiplication by an approximation to 2/sqrt(pi) (effectively, this way there are a few more bits in the approximation to 2/sqrt(pi)). This can introduce underflows when efx*x underflows even though the final result does not, so a scaled calculation with 8*efx is done in these cases - but 8 is not a big enough scale factor to avoid all such underflows. 16 is (any underflows with a scale factor of 16 would only occur when the final result underflows), so this patch changes the code to use that factor. Rather than recomputing all the values of the efx8 variable, it is removed, leaving it to the compiler's constant folding to compute 16*efx. As such scaling can also lose underflows when the final scaling down happens to be exact, appropriate checks are added to ensure underflow exceptions occur when required in such cases. Tested x86_64 and x86; no ulps updates needed. Also spot-checked for powerpc32 and mips64 to verify the changes to the ldbl-128ibm and ldbl-128 implementations. [BZ #16516] * sysdeps/ieee754/dbl-64/s_erf.c (efx8): Remove variable. (__erf): Scale by 16 instead of 8 in potentially underflowing case. Ensure exception if result actually underflows. * sysdeps/ieee754/flt-32/s_erff.c (efx8): Remove variable. (__erff): Scale by 16 instead of 8 in potentially underflowing case. Ensure exception if result actually underflows. * sysdeps/ieee754/ldbl-128/s_erfl.c: Include <float.h>. (efx8): Remove variable. (__erfl): Scale by 16 instead of 8 in potentially underflowing case. Ensure exception if result actually underflows. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <float.h>. (efx8): Remove variable. (__erfl): Scale by 16 instead of 8 in potentially underflowing case. Ensure exception if result actually underflows. * sysdeps/ieee754/ldbl-96/s_erfl.c: Include <float.h>. (efx8): Remove variable. (__erfl): Scale by 16 instead of 8 in potentially underflowing case. Ensure exception if result actually underflows. * math/auto-libm-test-in: Add more tests of erf. * math/auto-libm-test-out: Regenerated.
* Add fenv test support for targets which don't have FP traps.Wilco2014-04-171-10/+15
|
* Correct IBM long double frexpl.Alan Modra2014-04-161-0/+9
| | | | | | | | | | | Besides fixing the bugzilla, this also fixes corner-cases where the high and low double differ greatly in magnitude, and handles a denormal input without resorting to a fp rescale. [BZ #16740] [BZ #16619] * sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Rewrite. * math/libm-test.inc (frexp_test_data): Add tests.
* math: make test-fenv-preserve.c a no-op if FE_ALL_EXCEPT == 0.Chris Metcalf2014-04-111-0/+5
| | | | This fixes a testsuite failure for tile (and possibly microblaze).
* Fix catan, catanh, __ieee754_logf in round-downward mode (bug 16799, bug 16800).Joseph Myers2014-04-027-12/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes incorrect results from catan and catanh of certain special inputs in round-downward mode (bug 16799), and incorrect results of __ieee754_logf (+/-0) in round-downward mode (bug 16800) that show up through catan/catanh when tested in all rounding modes, but not directly in the testing for logf because the bug gets hidden by the wrappers. Both bugs involve a zero that should be +0 being -0 instead: one computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in the logf case. The fixes ensure positive zero is used. Testing of catan and catanh in all rounding modes is duly enabled. I expect there are various other bugs in special cases in __ieee754_* functions that are normally hidden by the wrappers but would show up for testing with -lieee (or in future with -fno-math-errno if we replace -lieee and _LIB_VERSION with compile-time redirection to new *_noerrno symbol names). Tested x86_64 and x86 and ulps updated accordingly. [BZ #16799] [BZ #16800] * math/s_catan.c (__catan): Avoid passing -0 denominator to atan2 with 0 numerator. * math/s_catanf.c (__catanf): Likewise. * math/s_catanh.c (__catanh): Likewise. * math/s_catanhf.c (__catanhf): Likewise. * math/s_catanhl.c (__catanhl): Likewise. * math/s_catanl.c (__catanl): Likewise. * sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide by positive zero when computing -Inf result. * math/libm-test.inc (catan_test): Use ALL_RM_TEST. (catanh_test): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix clog / clog10 sign of zero result in round-downward mode (bug 16789).Joseph Myers2014-04-027-35/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16789, incorrect sign of (real part) zero result from clog and clog10 in round-downward mode, arising from that real part being computed as 0 - 0. To ensure that an underflow exception occurred, the code used an underflowing value (the next term in the series for log1p) in arithmetic computing the real part of the result, yielding the problematic 0 - 0 computation in some cases even when the mathematical result would be small but positive. The patch changes this code to use the math_force_eval approach to ensuring that an underflowing computation actually occurs. Tests of clog and clog10 are enabled in all rounding modes. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16789] * math/s_clog.c (__clog): Use math_force_eval to ensure underflow instead of using underflowing value in computing result. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/libm-test.inc (clog_test): Use ALL_RM_TEST. (clog10_test): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Correct IBM long double nextafterl.Alan Modra2014-04-021-0/+8
| | | | | | | | | | | | Fix for values near a power of two, and some tidies. [BZ #16739] * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Correct output when value is near a power of two. Use int64_t for lx and remove casts. Use decimal rather than hex exponent constants. Don't use long double multiplication when double will suffice. * math/libm-test.inc (nextafter_test_data): Add tests. * NEWS: Add 16739 and 16786 to bug list.
* Set errno for scalb errors (bug 6803, bug 6804).Joseph Myers2014-03-315-75/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the default mode of scalb to set errno (bugs 6803 and 6804). Previously, the _LIB_VERSION == _SVID_ mode would set errno but only in some relevant cases, and with various peculiarities (such as errno setting when an exact infinity or zero result arises with an argument to scalb being an infinity). This patch leaves this mode bug-compatible, while making the default mode set errno in accordance with normal practice (so an exact infinity from an infinite argument is not an error, and nor is an exact zero result). gen-libm-test.pl is taught new notation such as ERRNO_PLUS_OFLOW to facilitate writing the tests of errno setting for underflow / overflow in libm-test.inc. Note that bug 6803 also covers scalbn and scalbln, but this patch only addresses the scalb parts of that bug (along with the whole of bug 6804). Tested x86_64 and x86. [BZ #6803] [BZ #6804] * math/w_scalb.c (__scalb): For non-SVID mode, check result and set errno as appropriate. * math/w_scalbf.c (__scalbf): Likewise. * math/w_scalbl.c (__scalbl): Likewise. * math/gen-libm-test.pl (parse_args): Handle ERRNO_PLUS_OFLOW, ERRNO_MINUS_OFLOW, ERRNO_PLUS_UFLOW and ERRNO_MINUS_UFLOW. * math/libm-test.inc (scalb_test_data): Add errno expectations. Add more NaN tests.
* Set errno for atan2 underflow (bug 16349).Joseph Myers2014-03-315-546/+563
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16349, missing errno setting for atan2 underflow, by adding appropriate checks to the existing wrappers. (As in other cases, the __kernel_standard support for calling matherr is considered to be for existing code expecting existing rules for what's considered an error, even if those don't correspond to a general logical scheme for what counts as what kind of error, so __set_errno calls are added directly without any changes to __kernel_standard.) Tested x86_64 and x86. [BZ #16349] * math/w_atan2.c: Include <errno.h>. (__atan2): Set errno for result underflowing to zero. * math/w_atan2f.c: Include <errno.h>. (__atan2f): Set errno for result underflowing to zero. * math/w_atan2l.c: Include <errno.h>. (__atan2l): Set errno for result underflowing to zero. * math/auto-libm-test-in: Don't allow missing errno for some atan2 tests. * math/auto-libm-test-out: Regenerated.
* Fix scalb spurious "invalid" exceptions (bug 16770).Joseph Myers2014-03-294-3/+20
| | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16770, spurious "invalid" exceptions from scalb when testing whether the second argument is an integer, by inserting appropriate range checks to determine whether a cast to int is safe. (Note that invalid_fn is a function that handles both nonintegers and large integers, distinguishing them reliably using functions such as __rint; note also that there are no issues with scalb needing to avoid spurious "inexact" exceptions - it's an old-POSIX XSI function, not a standard C function bound to an IEEE 754 operation - although the return value is still fully determined.) Tested x86_64 and x86. [BZ #16770] * math/e_scalb.c (__ieee754_scalb): Check second argument is not too large before casting to int. * math/e_scalbf.c (__ieee754_scalbf): Likewise. * math/e_scalbl.c (__ieee754_scalbl): Likewise. * math/libm-test.inc (scalb_test_data): Add more tests.
* Fix clog10 (-0 +/- 0i) (bug 16362).Joseph Myers2014-03-284-5/+14
| | | | | | | | | | | | | | | | | | | | | | This patch fixes the imaginary part of clog10 (-0 +/- 0i), which should be +/-pi / log(10) by analogy with clog (the functions were wrongly returning a result with imaginary part +/-pi, same as for clog, and the tests matched the incorrect result, though both functions and tests were correct for the similar case of clog10 (-inf +/- 0i)). Tested x86_64 and x86. [BZ #16362] * math/s_clog10.c (M_PI_LOG10E): New macro. (__clog10): Use M_PI_LOG10E instead of M_PI when real and imaginary parts are 0. * math/s_clog10f.c (M_PI_LOG10Ef): New macro. (__clog10f): Use M_PI_LOG10Ef instead of M_PI when real and imaginary parts are 0. * math/s_clog10l.c (M_PI_LOG10El): New macro. (__clog10l): Use M_PI_LOG10El instead of M_PIl when real and imaginary parts are 0. * math/libm-test.inc (clog10_test_data): Update expected results for when real and imaginary parts are 0.
* Fix x86/x86_64 expl/exp10l spurious underflows (bug 16348).Joseph Myers2014-03-272-0/+684
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16348, spurious underflows from x86/x86_64 expl on arguments close to 0. These implementations effectively use expm1 (on the fractional part of the argument) internally, so resulting in spurious underflows when the result is very close to 1. For arguments small enough that the round-to-nearest correct result is 1, this patch uses 1+x instead. These implementations are also used for exp10l and so the patch fixes similar issues there (the 0x1p-67 threshold being small enough to be correct for exp10l as well as expl). But because of spurious underflows in other exp10 implementations (bug 16560), the tests aren't added for exp10 at this point - they can be added when the other exp10 parts of that bug are fixed. Tested x86_64 and x86; no ulps updates needed. [BZ #16348] * sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use 1+x for argument with exponent below -67. * sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Likewise. * math/auto-libm-test-in: Add more tests of exp. * math/auto-libm-test-out: Regenerated.
* Make x86_64 fegetenv preserve exception mask (bug 16198).Joseph Myers2014-03-262-1/+54
| | | | | | | | | | | | | Bug 16198 is x86_64 fegetenv wrongly masking exceptions for which traps are enabled, because that's a side-effect of the fnstenv instruction. This patch fixes it to use fldenv immediately after fnstenv, like the i386 version. Tested x86_64 and x86. [BZ #16198] * sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Use fldenv after fnstenv. * math/test-fenv-preserve.c: New file. * math/Makefile (tests): Add test-fenv-preserve.
* Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes.Joseph Myers2014-03-254-295/+298
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix dbl-64 exp overflow/underflow in non-default rounding modes (bug 16284).Joseph Myers2014-03-243-411/+396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64 version of exp needs round-to-nearest mode for its internal computations, but that has the consequence of inappropriate overflowing and underflowing results in other rounding modes. This patch fixes this by recomputing the relevant results in cases where the round-to-nearest result overflows to infinity or underflows to zero (most of the diffs are actually just consequent reindentation). Tests are enabled in all rounding modes for complex functions using exp - but not for cexp because it turns out there are bugs causing spurious underflows for cexp for some tests, which will need to be fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have similar bugs, just not shown by the present set of test inputs). Tested x86_64 and x86 and ulps updated accordingly. [BZ #16284] * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original rounding mode to recompute results that overflow to infinity or underflow to zero. * math/auto-libm-test-in: Don't mark tests as expected to fail for bug 16284. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (ccos_test): Use ALL_RM_TEST. (ccosh_test): Likewise. (csin_test_data): Use plus_oflow. (csin_test): Use ALL_RM_TEST. (csinh_test_data): Use plus_oflow. (csinh_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix log (1) in round-downward mode (bug 16731).Joseph Myers2014-03-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to ISO C Annex F, log (1) should be +0 in all rounding modes, but some implementations in glibc wrongly return -0 in round-downward mode (mapping to log1p (x - 1) is problematic because 1 - 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch fixes this. (It helps with some implementations of other functions such as acosh, log2 and log10 that call out to log, but not enough to enable all-rounding-modes testing for those functions without further fixes to other implementations of them.) Tested x86_64 and x86 and ulps updated accordingly, and did spot tests for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu implementations shadowed by those in sysdeps/i386/i686/fpu. [BZ #16731] * sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value when x - 1 is zero. * sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise. * sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise. * sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise. * sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when argument is 1. * sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise. * sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is zero. * math/libm-test.inc (log_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Test most libm functions in all rounding modes.Joseph Myers2014-03-211-74/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes libm-test.inc tests of most functions use ALL_RM_TEST unless there was some reason to defer that change for a particular function. I started out planning to defer the change for pow (bug 16315), cexp / ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and cpow (exact expectations for signs of exact zero results not wanted). Testing on x86_64 and x86 showed additional failures for acosh, cacos, catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn, so making the change for those functions was deferred as well, pending investigation to show which of these represent distinct bugs (some such bugs may already be filed) and appropriate fixing / XFAILing. Failures include wrong signs of zero results, errors slightly above the 9ulp bound (in such cases it may make sense for functions to set round-to-nearest internally to reduce error accumulation), large errors and incorrect overflow/underflow for the rounding mode (with consequent missing errno settings in some cases). It's possible some could be issues with test expectations, though I didn't notice any that were obviously like that (I added NO_TEST_INLINE for cases that were failing for ildoubl on x86 and where it seemed reasonable for them to fail for the fast-math inlines). There may of course be failures on other architectures for functions that didn't fail on x86_64 or x86, in which case the usual rule applies: file a bug (preferably identifying the underlying problem function, in cases where function A calls function B and a problem with function B may present in the test results for function A) if not already in Bugzilla then fix or XFAIL. Tested x86_64 and x86 and ulps updated accordingly. * math/libm-test.inc (asinh_test): Use ALL_RM_TEST. (atan_test): Likewise. (atanh_test_data): Use NO_TEST_INLINE for two tests. (atanh_test): Use ALL_RM_TEST. (atan2_test_data): Likewise. (cabs_test): Likewise. (cacosh_test): Likewise. (carg_test): Likewise. (casin_test): Likewise. (casinh_test): Likewise. (cbrt_test): Likewise. (csqrt_test): Likewise. (erf_test): Likewise. (erfc_test): Likewise. (pow10_test): Likewise. (exp2_test): Likewise. (hypot_test): Likewise. (j0_test): Likewise. (j1_test): Likewise. (lgamma_test): Likewise. (gamma_test): Likewise. (sincos_test): Likewise. (tanh_test): Likewise. (y0_test): Likewise. (y1_test): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Make libm-test support ALL_RM_TEST with AUTO_TESTS_*.Joseph Myers2014-03-202-1035/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues improvements to all-rounding-mode libm testing by making testing with ALL_RM_TEST support test results from auto-libm-test-out. gen-libm-test.pl is adapted to generate appropriate output with results for each rounding mode, with AUTO_TESTS_* calls no longer specifying a rounding mode. Where there were separate functions in libm-test.inc to test a function in each rounding mode, using AUTO_TESTS_* to list the tests for each rounding mode, those are converted to using ALL_RM_TEST (so generally this patch doesn't change the sets of tests run in each rounding mode, except that in various cases special-case tests given directly in libm-test.inc were previously run only for round-to-nearest, and now are run for all rounding modes). Tested x86_64 and x86. * math/gen-libm-test.pl (generate_testfile): Expect only function name as argument to AUTO_TESTS_* and pass results for all rounding modes to parse_args. (parse_auto_input): Separate inputs of automatic tests from outputs before storing in %auto_tests. * math/libm-test.inc (acos_test_data): Update call to AUTO_TESTS_f_f. (acos_test): Use ALL_RM_TEST. (acos_tonearest_test_data): Remove. (acos_test_tonearest): Likewise. (acos_towardzero_test_data): Likewise. (acos_test_towardzero): Likewise. (acos_downward_test_data): Likewise. (acos_test_downward): Likewise. (acos_upward_test_data): Likewise. (acos_test_upward): Likewise. (acosh_test_data): Update call to AUTO_TESTS_f_f. (asin_test_data): Likewise. (asin_test): Use ALL_RM_TEST. (asin_tonearest_test_data): Remove. (asin_test_tonearest): Likewise. (asin_towardzero_test_data): Likewise. (asin_test_towardzero): Likewise. (asin_downward_test_data): Likewise. (asin_test_downward): Likewise. (asin_upward_test_data): Likewise. (asin_test_upward): Likewise. (asinh_test_data): Update call to AUTO_TESTS_f_f. (atan_test_data): Likewise. (atanh_test_data): Likewise. (atan2_test_data): Update call to AUTO_TESTS_ff_f. (cabs_test_data): Update call to AUTO_TESTS_c_f. (carg_test_data): Likewise. (cbrt_test_data): Update call to AUTO_TESTS_f_f. (ccos_test_data): Update call to AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (clog10_test_data): Likewise. (cos_test_data): Update call to AUTO_TESTS_f_f. (cos_test): Use ALL_RM_TEST. (cos_tonearest_test_data): Remove. (cos_test_tonearest): Likewise. (cos_towardzero_test_data): Likewise. (cos_test_towardzero): Likewise. (cos_downward_test_data): Likewise. (cos_test_downward): Likewise. (cos_upward_test_data): Likewise. (cos_test_upward): Likewise. (cosh_test_data): Update call to AUTO_TESTS_f_f. (cosh_test): Use ALL_RM_TEST. (cosh_tonearest_test_data): Remove. (cosh_test_tonearest): Likewise. (cosh_towardzero_test_data): Likewise. (cosh_test_towardzero): Likewise. (cosh_downward_test_data): Likewise. (cosh_test_downward): Likewise. (cosh_upward_test_data): Likewise. (cosh_test_upward): Likewise. (cpow_test_data): Update call to AUTO_TESTS_cc_c. (csqrt_test_data): Update call to AUTO_TESTS_c_c. (ctan_test_data): Likewise. (ctan_test): Use ALL_RM_TEST. (ctan_tonearest_test_data): Remove. (ctan_test_tonearest): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_test_towardzero): Likewise. (ctan_downward_test_data): Likewise. (ctan_test_downward): Likewise. (ctan_upward_test_data): Likewise. (ctan_test_upward): Likewise. (ctanh_test_data): Update call to AUTO_TESTS_c_c. (ctanh_test): Use ALL_RM_TEST. (ctanh_tonearest_test_data): Remove. (ctanh_test_tonearest): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_test_towardzero): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_test_downward): Likewise. (ctanh_upward_test_data): Likewise. (ctanh_test_upward): Likewise. (erf_test_data): Update call to AUTO_TESTS_f_f. (erfc_test_data): Likewise. (exp_test_data): Likewise. (exp_test): Use ALL_RM_TEST. (exp_tonearest_test_data): Remove. (exp_test_tonearest): Likewise. (exp_towardzero_test_data): Likewise. (exp_test_towardzero): Likewise. (exp_downward_test_data): Likewise. (exp_test_downward): Likewise. (exp_upward_test_data): Likewise. (exp_test_upward): Likewise. (exp10_test_data): Update call to AUTO_TESTS_f_f. (exp10_test): Use ALL_RM_TEST. (exp10_tonearest_test_data): Remove. (exp10_test_tonearest): Likewise. (exp10_towardzero_test_data): Likewise. (exp10_test_towardzero): Likewise. (exp10_downward_test_data): Likewise. (exp10_test_downward): Likewise. (exp10_upward_test_data): Likewise. (exp10_test_upward): Likewise. (exp2_test_data): Update call to AUTO_TESTS_f_f. (expm1_test_data): Likewise. (expm1_test): Use ALL_RM_TEST. (expm1_tonearest_test_data): Remove. (expm1_test_tonearest): Likewise. (expm1_towardzero_test_data): Likewise. (expm1_test_towardzero): Likewise. (expm1_downward_test_data): Likewise. (expm1_test_downward): Likewise. (expm1_upward_test_data): Likewise. (expm1_test_upward): Likewise. (fma_test_data): Update call to AUTO_TESTS_fff_f. (fma_test): Use ALL_RM_TEST. (fma_towardzero_test_data): Remove. (fma_test_towardzero): Likewise. (fma_downward_test_data): Likewise. (fma_test_downward): Likewise. (fma_upward_test_data): Likewise. (fma_test_upward): Likewise. (hypot_test_data): Update call to AUTO_TESTS_ff_f. (j0_test_data): Update call to AUTO_TESTS_f_f. (j1_test_data): Likewise. (jn_test_data): Update call to AUTO_TESTS_if_f. (lgamma_test_data): Update call to AUTO_TESTS_f_f1. (log_test_data): Update call to AUTO_TESTS_f_f. (log10_test_data): Likewise. (log1p_test_data): Likewise. (log2_test_data): Likewise. (pow_test_data): Update call to AUTO_TESTS_ff_f. (pow_tonearest_test_data): Likewise. (sin_test_data): Update call to AUTO_TESTS_f_f. (sin_test): Use ALL_RM_TEST. (sin_tonearest_test_data): Remove. (sin_test_tonearest): Likewise. (sin_towardzero_test_data): Likewise. (sin_test_towardzero): Likewise. (sin_downward_test_data): Likewise. (sin_test_downward): Likewise. (sin_upward_test_data): Likewise. (sin_test_upward): Likewise. (sincos_test_data): Update call to AUTO_TESTS_fFF_11. (sinh_test_data): Update call to AUTO_TESTS_f_f. (sinh_test): Use ALL_RM_TEST. (sinh_tonearest_test_data): Remove. (sinh_test_tonearest): Likewise. (sinh_towardzero_test_data): Likewise. (sinh_test_towardzero): Likewise. (sinh_downward_test_data): Likewise. (sinh_test_downward): Likewise. (sinh_upward_test_data): Likewise. (sinh_test_upward): Likewise. (sqrt_test_data): Update call to AUTO_TESTS_f_f. (sqrt_test): Use ALL_RM_TEST. (sqrt_tonearest_test_data): Remove. (sqrt_test_tonearest): Likewise. (sqrt_towardzero_test_data): Likewise. (sqrt_test_towardzero): Likewise. (sqrt_downward_test_data): Likewise. (sqrt_test_downward): Likewise. (sqrt_upward_test_data): Likewise. (sqrt_test_upward): Likewise. (tan_test_data): Update call to AUTO_TESTS_f_f. (tan_test): Use ALL_RM_TEST. (tan_tonearest_test_data): Remove. (tan_test_tonearest): Likewise. (tan_towardzero_test_data): Likewise. (tan_test_towardzero): Likewise. (tan_downward_test_data): Likewise. (tan_test_downward): Likewise. (tan_upward_test_data): Likewise. (tan_test_upward): Likewise. (tanh_test_data): Update call to AUTO_TESTS_f_f. (tgamma_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Update call to AUTO_TESTS_if_f. (main): Do not call removed functions.
* Use ALL_RM_TEST for more libm tests.Joseph Myers2014-03-191-32/+9
| | | | | | | | | | | | | | | | | | | Continuing the move to using ALL_RM_TEST for tests in libm-test.inc, this patch converts the tests of fdim, ldexp and scalb. fdim and scalb are cases where tests could depend on the rounding mode though none of the present test inputs do; ldexp is such a case where the function is equivalent to scalbn (for binary floating point) and the tests used were a subset of those for scalbn, so this patch makes ldexp testing use the scalbn tests, as done for other cases of libm function aliases. Tested x86_64 and x86. * math/libm-test.inc (fdim_test): Use ALL_RM_TEST. (ldexp_test_data): Remove. (ldexp_test): Move to after scalbn_test. Use ALL_RM_TEST with scalbn_test_data. (scalb_test): Use ALL_RM_TEST.
* Test scalbn and scalbln in all rounding modes, add more tests of negative ↵Joseph Myers2014-03-182-47/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arguments. Continuing the move to systematically testing libm functions in all rounding modes with ALL_RM_TEST, this patch converts the tests of scalbn and scalbln to use that macro. Those tests include cases of underflow and overflow, meaning the expected results depend on the rounding mode. For convenience in writing such tests manually, the patch adds the notation plus_oflow, minus_oflow, plus_uflow and minus_uflow for overflowing / underflowing results of each sign appropriate to the rounding mode being used, and gen-libm-test.pl is made to substitute in the appropriate values. The tests of underflow and overflow are extended to include negative arguments to provide better coverage (otherwise minus_oflow and minus_uflow wouldn't have been used at all). (A subsequent patch will make ldexp use the scalbn tests, as those functions are equivalent for binary floating point.) Tested x86_64 and x86. * math/gen-libm-test.pl (parse_args): Handle plus_oflow, minus_oflow, plus_uflow and minus_uflow in expected results. * math/libm-test.inc (scalbn_test_data): Add more tests of negative arguments. Use plus_oflow, minus_oflow, plus_uflow and minus_uflow. (scalbn_test): Use ALL_RM_TEST. (scalbln_test_data): Add more tests of negative arguments. Use plus_oflow, minus_oflow, plus_uflow and minus_uflow. (scalbln_test): Use ALL_RM_TEST.
* Test rint and nearbyint with same inputs, in all rounding modes.Joseph Myers2014-03-171-49/+150
| | | | | | | | | | | | | | | | | | This patch arranges for rint and nearbyint to be tested by libm-test.inc with the same inputs (previously each had some test inputs the other didn't, although there was a lot of overlap as well), and for nearbyint to be tested in all rounding modes where previously it was only tested in round-to-nearest mode. The expected results are the same for each function, except that rint is expected to have "inexact" exceptions for non-integer input and nearbyint is expected not to have those exceptions. Tested x86_64 and x86. * math/libm-test.inc (nearbyint_test_data): Include all tests used for rint. Include results for all rounding modes. (nearbyint_test): Use ALL_RM_TEST. (rint_test_data): Include all tests used for nearbyint.
* Add libm-test support for per-rounding-mode manually specified results.Joseph Myers2014-03-172-1284/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the libm-test move towards automatic testing of all test inputs in all rounding modes by adding gen-libm-test.pl support for tests specifying results in each rounding mode manually. Previously a TEST_* line could specify arguments and results, or arguments, results and flags. Now there is the option of (arguments, results-rd, flags-rd, results-rn, flags-rn, results-rz, flags-rz, results-ru, flags-ru). This is used to replace the separate arrays of results in each rounding mode for lrint, llrint and rint. (In the case of rint, some tests were only in rint_test_data and needed to have expectations for non-default rounding modes added, which I did manually. In various cases there were slight differences in things such as the ordering of tests in the arrays for each mode.) Tested x86_64 and x86. * math/gen-libm-test.pl (parse_args): Handle results specified for each rounding mode separately. * math/libm-test.inc (lrint_test_data): Merge in per-rounding-mode tests and results from lrint_tonearest_test_data, lrint_towardzero_test_data, lrint_downward_test_data and lrint_upward_test_data. (lrint_test): Use ALL_RM_TEST. (lrint_tonearest_test_data): Remove. (lrint_test_tonearest): Likewise. (lrint_towardzero_test_data): Likewise. (lrint_test_towardzero): Likewise. (lrint_downward_test_data): Likewise. (lrint_test_downward): Likewise. (lrint_upward_test_data): Likewise. (lrint_test_upward): Likewise. (llrint_test_data): Merge in per-rounding-mode tests and results from llrint_tonearest_test_data, llrint_towardzero_test_data, llrint_downward_test_data and llrint_upward_test_data. (llrint_test): Use ALL_RM_TEST. (llrint_tonearest_test_data): Remove. (llrint_test_tonearest): Likewise. (llrint_towardzero_test_data): Likewise. (llrint_test_towardzero): Likewise. (llrint_downward_test_data): Likewise. (llrint_test_downward): Likewise. (llrint_upward_test_data): Likewise. (llrint_test_upward): Likewise. (rint_test_data): Merge in per-rounding-mode tests and results from rint_tonearest_test_data, rint_towardzero_test_data, rint_downward_test_data and rint_upward_test_data. Add per-rounding-mode results for tests not in those arrays. (rint_test): Use ALL_RM_TEST. (rint_tonearest_test_data): Remove. (rint_test_tonearest): Likewise. (rint_towardzero_test_data): Likewise. (rint_test_towardzero): Likewise. (rint_downward_test_data): Likewise. (rint_test_downward): Likewise. (rint_upward_test_data): Likewise. (rint_test_upward): Likewise. (main): Don't call removed functions.
* PowerPC: remove wrong roundl implementation for PowerPC64Adhemerval Zanella2014-03-141-0/+9
| | | | | | | | | | | | | | | | | The roundl assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_roundl.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_roundl.c instead fixes the failing math. This fixes 16707.
* PowerPC: remove wrong nearbyintl implementation for PPC64Adhemerval Zanella2014-03-141-0/+10
| | | | | | | | | | | | | | | | | | The nearbyintl assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c instead fixes the failing math. Fixes BZ#16706.
* PowerPC: remove wrong ceill implementation for PowerPC64Adhemerval Zanella2014-03-141-0/+9
| | | | | | | | | | | | | | | | The ceill assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_ceill.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_ceill.c instead fixes the failing math. Fixes BZ#16701.
* Add truncl tests related to BZ#16414Adhemerval Zanella2014-03-141-0/+9
|
* Fix nextafter overflow in non-default rounding modes (bug 16677).Joseph Myers2014-03-112-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ISO C requires the result of nextafter to be independent of the rounding mode, even when underflow or overflow occurs. This patch fixes the bug in various nextafter implementations that, having done an overflowing computation to force an overflow exception (correct), they then return the result of that computation rather than an infinity computed some other way (incorrect, when the overflowing result of arithmetic with that sign and rounding mode is finite but the correct result is infinite) - generally by falling through to existing code to return a value that in fact is correct for this case (but was computed by an integer increment and so without generating the exceptions required). Having fixed the bug, the previously deferred conversion of nextafter testing in libm-test.inc to ALL_RM_TEST is also included. Tested x86_64 and x86; also spot-checked results of nextafter tests for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128 changes. (The m68k change is untested.) [BZ #16677] * math/s_nextafter.c (__nextafter): Do not return value from overflowing computation. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
* Add libm-test.inc macro for all-rounding-modes testing.Joseph Myers2014-03-081-325/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support in libm-test.inc for automatically running tests of a function in all rounding modes, in the form of a macro ALL_RM_TEST to loop over all rounding modes when running tests of a function, and uses it for functions whose results should always be independent of the rounding mode. Conversion of tests of nextafter to ALL_RM_TEST was deferred because trying that conversion showed up bug 16677. (Finding such a bug of course illustrates the point of testing more systematically in all rounding modes rather than only reactively when bugs get reported in a particular function in a non-default mode.) Conversion of tests where results can depend on the rounding mode will follow once I add gen-libm-test.pl support for using different initializers for the expected results for different rounding modes (again, some conversions may need deferring until bugs are fixed, depending on how straightforward they are to XFAIL in a particular context). Some existing tests get run five times rather than four, with round-to-nearest tests both run in that as default rounding mode and also with it explicitly set with fesetround (FE_TONEAREST). This duplication doesn't seem particularly useful, so ALL_RM_TEST only runs tests four times. Tested x86_64 and x86. * math/libm-test.inc (ALL_RM_TEST): New macro. (ceil_test): Use ALL_RM_TEST. (cimag_test): Likewise. (conj_test): Likewise. (copysign_test): Likewise. (cproj_test): Likewise. (creal_test): Likewise. (fabs_test): Likewise. (floor_test): Likewise. (fmax_test): Likewise. (fmin_test): Likewise. (fmod_test): Likewise. (fpclassify_test): Likewise. (frexp_test): Likewise. (ilogb_test): Likewise. (isfinite_test): Likewise. (finite_test): Likewise. (isgreater_test): Likewise. (isgreaterequal_test): Likewise. (isinf_test): Likewise. (isless_test): Likewise. (islessequal_test): Likewise. (islessgreater_test): Likewise. (isnan_test): Likewise. (isnormal_test): Likewise. (issignaling_test): Likewise. (isunordered_test): Likewise. (logb_test): Likewise. (logb_downward_test_data): Remove. (logb_test_downward): Likewise. (lround_test): Use ALL_RM_TEST. (llround_test): Likewise. (modf_test): Likewise. (nexttoward_test): Likewise. (remainder_test): Likewise. (drem_test): Likewise. (remainder_tonearest_test_data): Likewise. (remainder_test_tonearest): Likewise. (drem_test_tonearest): Likewise. (remainder_towardzero_test_data): Likewise. (remainder_test_towardzero): Likewise. (drem_test_towardzero): Likewise. (remainder_downward_test_data): Likewise. (remainder_test_downward): Likewise. (drem_test_downward): Likewise. (remainder_upward_test_data): Likewise. (remainder_test_upward): Likewise. (drem_test_upward): Likewise. (remquo_test): Use ALL_RM_TEST. Remove comment about x. (round_test): Use ALL_RM_TEST. (signbit_test): Likewise. (trunc_test): Likewise. (significand_test): Likewise. (main): Don't call removed functions.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-24 17:10:50 +0000