about summary refs log tree commit diff
path: root/math
Commit message (Collapse)AuthorAgeFilesLines
* Improve the accuracy of tgamma (BZ #26983)Paul Zimmermann2021-04-073-1/+346
| | | | | | | | | | | | With this patch, the maximal known error for tgamma is now reduced to 9 ulps for dbl-64, for all rounding modes. Since exhaustive testing is not possible for dbl-64, it might be that there are still cases with an error larger than 9 ulps, but all known cases are fixed (intensive tests were done to find cases with large errors). Tested on x86_64 and powerpc (and by Adhemerval Zanella on aarch64, arm, s390x, sparc, and i686). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Fix the inaccuracy of j0f/j1f/y0f/y1f [BZ #14469, #14470, #14471, #14472]Paul Zimmermann2021-04-025-3/+242
| | | | | | | | | | | | | | | | | | | | | | | For j0f/j1f/y0f/y1f, the largest error for all binary32 inputs is reduced to at most 9 ulps for all rounding modes. The new code is enabled only when there is a cancellation at the very end of the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not give any visible slowdown on average. Two different algorithms are used: * around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of degree 3 are used, computed using the Sollya tool (https://www.sollya.org/) * for large inputs, an asymptotic formula from [1] is used [1] Fast and Accurate Bessel Function Computation, John Harrison, Proceedings of Arith 19, 2009. Inputs yielding the new largest errors are added to auto-libm-test-in, and ulps are regenerated for various targets (thanks Adhemerval Zanella). Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Avoid adding duplicated symbols into static librariesSiddhesh Poyarekar2021-03-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Some math functions (such as __isnan*) are built into both libm and libc because they are needed in libc. The symbol gets exported from libc.so and not libm.so, because of which dynamic linking works fine; the symbols are always resolved from libc.so and libm.so uses its internal copy of the same function if needed. When linking statically though, the libm variants get used throughout because the symbols are exported in both archives and libm.a is searched first. This patch removes these duplicate objects from the libm.a archive so that programs always link to libc in both, the static and dynamic case. The difference this will cause is that libm uses of these functions will start using the libc versions in the !SHARED case. This is harmless at the moment because the objects are identical except for their names. Some of these duplicates could be removed from libm.so too, but I avoided that in the interest of retaining an internal reference if at all those functions get used within libm in future. Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
* math: Remove mpa files [BZ #15267]Wilco Dijkstra2021-03-111-2/+1
| | | | | | | Finally remove all mpa related files, headers, declarations, probes, unused tables and update makefiles. Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
* math: test-matherr and test-matherr-2 can be regular testsFlorian Weimer2021-03-092-12/+7
| | | | | | | | compat_symbol_reference is now available without tests-internal. Do not build the test at all on glibc versions that lack the symbols, to avoid spurious UNSUPPORTED results. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* math: $(libm-tests-compat) can be regular testsFlorian Weimer2021-03-091-2/+1
| | | | | | | tests-internal is no longer needed because compat_symbol_reference now works in regular tests. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Add inputs that generate larger error boundsPaul Zimmermann2021-02-2718-0/+3060
| | | | (Using values from https://members.loria.fr/PZimmermann/papers/accuracy.pdf)
* math/test-tgmath2: Fix fabs failure when no long doubleStafford Horne2021-01-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | I have been testing with GCC trunk and GLIBC master while working on the OpenRISC port. This test has been failing with fabs not being called, This is caused as my architecture is configure with no long double meaning the two calls are the same: TEST (fabs (Vdouble1), double, fabs); TEST (fabs (Vldouble1), ldouble, fabs); Instead of the tgmath calls resolving to fabs and fabsl both calls are fabs. Next, do to compiler optimiations the second call is eliminated. Fix this by invoking the failing TEST with Vldouble2. Note, I also updated the FAIL message to more clearly show where the failure happened, so I see: FAIL: math/test-tgmath2 original exit status 1 wrong function called, fabs (ldouble) failure on line 174 Cc: Joseph Myers <joseph@codesourcery.com>
* Use the right argument code in unnormal testsSiddhesh Poyarekar2021-01-135-33/+35
| | | | | | Use the right argument code (j) in the unnormal tests and cast inputs from the ieee_long_double_shape_type struct to Float64x to properly test it.
* Drop nan-pseudo-number.h usage from testsSiddhesh Poyarekar2021-01-045-11/+10
| | | | | | | | | | Make the tests use TEST_COND_intel96 to decide on whether to build the unnormal tests instead of the macro in nan-pseudo-number.h and then drop the header inclusion. This unbreaks test runs on all architectures that do not have ldbl-96. Also drop the HANDLE_PSEUDO_NUMBERS macro since it is not used anywhere.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-02372-372/+372
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* x86 long double: Add tests for pseudo normal numbersSiddhesh Poyarekar2020-12-305-0/+94
| | | | | | | Add some tests for fpclassify, isnan, isinf and issignaling. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* add inputs to auto-libm-test-in yielding larger errors (binary64, x86_64)Paul Zimmermann2020-12-219-0/+568
|
* math: Regenerate auto-libm-test-out-j0Adhemerval Zanella2020-08-081-0/+25
| | | | This is a missing bit for b7dd366dbe.
* math: Fix inaccuracy of j0f for x >= 2^127 when sin(x)+cos(x) is tinyPaul Zimmermann2020-08-071-0/+2
| | | | Checked on x86_64-linux-gnu and i686-linux-gnu.
* Use C2x return value from getpayload of non-NaN (bug 26073).Joseph Myers2020-07-061-11/+11
| | | | | | | | | | | | | | | In TS 18661-1, getpayload had an unspecified return value for a non-NaN argument, while C2x requires the return value -1 in that case. This patch implements the return value of -1. I don't think this is worth having a new symbol version that's an alias of the old one, although occasionally we do that in such cases where the new function semantics are a refinement of the old ones (to avoid programs relying on the new semantics running on older glibc versions but not behaving as intended). Tested for x86_64 and x86; also ran math/ tests for aarch64 and powerpc.
* New exp10f version without SVID compat wrapperAdhemerval Zanella2020-06-193-4/+8
| | | | | | | | | | | | | | | | | | | | | | | This patch changes the exp10f error handling semantics to only set errno according to POSIX rules. New symbol version is introduced at GLIBC_2.32. The old wrappers are kept for compat symbols. There are some outliers that need special handling: - ia64 provides an optimized implementation of exp10f that uses ia64 specific routines to set SVID compatibility. The new symbol version is aliased to the exp10f one. - m68k also provides an optimized implementation, and the new version uses it instead of the sysdeps/ieee754/flt32 one. - riscv and csky uses the generic template implementation that does not provide SVID support. For both cases a new exp10f version is not added, but rather the symbols version of the generic sysdeps/ieee754/flt32 is adjusted instead. Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu.
* math: Optimized generic exp10f with wrappersPaul Zimmermann2020-06-191-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is inspired by expf and reuses its tables and internal functions. The error checks are inlined and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Result for x86_64 (i7-4790K CPU @ 4.00GHz) are: Before new code: "exp10f": { "workload-spec2017.wrf (adapted)": { "duration": 4.0414e+09, "iterations": 1.00128e+08, "reciprocal-throughput": 26.6818, "latency": 54.043, "max-throughput": 3.74787e+07, "min-throughput": 1.85038e+07 } With new code: "exp10f": { "workload-spec2017.wrf (adapted)": { "duration": 4.11951e+09, "iterations": 1.23968e+08, "reciprocal-throughput": 21.0581, "latency": 45.4028, "max-throughput": 4.74876e+07, "min-throughput": 2.20251e+07 } Result for aarch64 (A72 @ 2GHz) are: Before new code: "exp10f": { "workload-spec2017.wrf (adapted)": { "duration": 4.62362e+09, "iterations": 3.3376e+07, "reciprocal-throughput": 127.698, "latency": 149.365, "max-throughput": 7.831e+06, "min-throughput": 6.69501e+06 } With new code: "exp10f": { "workload-spec2017.wrf (adapted)": { "duration": 4.29108e+09, "iterations": 6.6752e+07, "reciprocal-throughput": 51.2111, "latency": 77.3568, "max-throughput": 1.9527e+07, "min-throughput": 1.29271e+07 } Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, aarch64-linux-gnu, and sparc64-linux-gnu.
* Rename __LONG_DOUBLE_USES_FLOAT128 to __LDOUBLE_REDIRECTS_TO_FLOAT128_ABIPaul E. Murphy2020-04-303-9/+9
| | | | | | | | | | | | | | | Improve the commentary to aid future developers who will stumble upon this novel, yet not always perfect, mechanism to support alternative formats for long double. Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to __LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work has settled down. The command used was git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \ xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g' Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Remove __NO_MATH_INLINESAdhemerval Zanella2020-04-175-20/+3
| | | | | | With fenvinline.h removal the flag is not used anymore. Checked on x86_64-linux-gnu.
* powerpc: Update ULPs and xfail more ibm128 outputsTulio Magno Quites Machado Filho2020-04-073-40/+40
| | | | | | | There are 2 new input values that require to be marked as xfail-rounding:ibm128-libgcc as they're known to fail because of libgcc issues with different rounding modes. Otherwise, the other tests just need an increase in ULP.
* math: Add inputs that yield larger errors for float type (x86_64)Paul Zimmermann2020-03-3113-0/+324
| | | | | | | | | | | The corner cases included were generated using exhaustive search for all float/binary32 values on x86_64 (comparing to MPFR for correct rounding to nearest). For the j0/j1/y0 functions, only cases with ulp error <= 9 were included. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* math: Remove fenvinline.hAdhemerval Zanella2020-03-303-360/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to string2.h (18b10de7ce) and string3.h (09a596cc2c) this patch removes the fenvinline.h on all architectures. Currently only powerpc implements some optimizations. This kind of optimization is better implemented by the compiler (which handles the architecture ISA transparently). Also, for the specific optimized powerpc implementation the code is becoming convoluted and these micro-optimization are hardly wildly used, even more being a possible hotspot in realword cases (non-default rounding are used only on specific cases and exception handling are done most likely only on errors path). Only x86 implements similar optimization (on fenv.h) also indicates that these should no be on libc. The math/test-fenv already covers all math/test-fenvinline tests, so it is safe to remove it. The powerpc fegetround optimization is moved to internal fenv_libc.h. The BZ#94193 [1] the corresponding GCC bug for adding replacements for these on powerpc. Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94193
* math: Remove inline math testsAdhemerval Zanella2020-03-1939-7683/+7562
| | | | | | | | | | | | | With mathinline removal there is no need to keep building and testing inline math tests. The gen-libm-tests.py support to generate ULP_I_* is removed and all libm-test-ulps files are updated to longer have the i{float,double,ldouble} entries. The support for no-test-inline is also removed from both gen-auto-libm-tests and the auto-libm-test-out-* were regenerated. Checked on x86_64-linux-gnu and i686-linux-gnu.
* Remove __LIBC_INTERNAL_MATH_INLINESAdhemerval Zanella2020-03-193-3/+1
| | | | | | With m68k mathinline.h removal the flag is not used anymore. Checked with a m68k-linux-gnu build/check.
* math: Remove mathinlineAdhemerval Zanella2020-03-192-7/+1
| | | | | With m68k bits moved to internal headers, no architectures export additional optimizations on mathinline.
* Fix build with GCC 10 when long double = double.Joseph Myers2020-03-171-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | On platforms where long double has the same ABI as double, glibc defines long double functions as aliases for the corresponding double functions. The declarations of those functions in <math.h> are disabled to avoid problems with aliases having incompatible types, but GCC 10 now gives errors for incompatible types when the long double function is known to GCC as a built-in function, not just when there is an incompatible header declaration. This patch fixes those errors by using appropriate -fno-builtin-<function> options to compile the double functions. The list of CFLAGS-* settings is an appropriately adapted version of that in sysdeps/ieee754/ldbl-opt/Makefile used there for building nldbl-*.c files; in particular, the options are used even if GCC does not currently have a built-in function of a given function, so that adding such a built-in function in future will not break the glibc build. Thus, various of the CFLAGS-* settings are only for future-proofing and may not currently be needed (and it's possible some could be irrelevant for other reasons). Tested with build-many-glibcs.py for arm-linux-gnueabi (compilers and glibcs builds), where it fixes the build that previously failed.
* ldbl-128ibm-compat: Add tests for IBM long double functionsRajalakshmi Srinivasaraghavan2020-03-063-1/+32
| | | | | | | | | | | | This patch creates test-ibm128* tests from the long double function tests. In order to explicitly test IBM long double functions -mabi=ibmlongdouble is added to CFLAGS. Likewise, update the test headers to correct choose ULPs when redirects are enabled. Co-authored-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Co-authored-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* Convert Python scripts to Python 3Alistair Francis2020-03-032-2/+2
| | | | | | | | | Change all of the #! lines in Python scripts that are called from Makefiles to reference /usr/bin/python3. All of the scripts called from Makefiles are already run with Python 3, so let's make sure they are explicitly using Python 3 if called manually.
* ldbl-128ibm-compat: Redirect complex math functionsRajalakshmi Srinivasaraghavan2020-02-281-2/+19
| | | | | | | The API doesn't change, i.e. compilers using a long double format compatible with the IEEE 128-bit extended precision format are redirected from *l functions to __*ieee128 symbols using the same mechanism already used with -mlong-double-64 for complex math functions.
* ldbl-128ibm-compat: Redirect long double functions to f128/ieee128 functionsTulio Magno Quites Machado Filho2020-02-283-14/+72
| | | | | | | | | | | | | | | | Modify the headers to redirect long double functions to global __*f128 symbols or to __*ieee128 otherwise. Most of the functions in math.h benefit from the infrastructure already available for __LDBL_COMPAT. The only exceptions are nexttowardf and nexttoward that need especial treatment. Both math/bits/mathcalls-helper-functions.h and math/bits/mathcalls.h were modified in order to provide alternative redirection destinations that are essential to support functions that should not be redirected to the same name pattern of the rest of the functions, i.e.: __fpclassify, __signbit, __iseqsig, __issignaling, isinf, finite and isnan, which will be redirected to __*f128 instead of __*ieee128 used for the rest.
* ldbl-128ibm-compat: Provide ieee128 symbols to narrow functionsTulio Magno Quites Machado Filho2020-02-201-14/+1
| | | | | | | | | | Move the narrow math aliasing macros into a new sysdep header file math-narrow-alias-float128.h. Then, provide an override header to supply the necessary changes to supply the *ieee128 aliases of these symbols. This adds ieee128 aliases for faddl, fdivl, fmull, fsubl, daddl, ddivl, dmull, dsubl.
* Undefine redirections after long double definition on __LDBL_COMPAT [BZ #23294]Tulio Magno Quites Machado Filho2020-02-202-6/+22
| | | | | | After defining the long double redirections to double, __MATHDECL_1 has to be redefined to its previous state in order to avoid redirecting all subsequent types.
* Add a generic scalb implementationTulio Magno Quites Machado Filho2020-02-148-136/+83
| | | | | | | | | | | | | | | | | | | | | | | This is a preparatory patch to enable building a _Float128 variant to ease reuse when building a _Float128 variant to alias this long double only symbol. Notably, stubs are added where missing to the native _Float128 sysdep dir to prevent building these newly templated variants created inside the build directories. Also noteworthy are the changes around LIBM_SVID_COMPAT. These changes are not intuitive. The templated version is only enabled when !LIBM_SVID_COMPAT, and the compat version is predicated entirely on LIBM_SVID_COMPAT. Thus, exactly one is stubbed out entirely when building. The nldbl scalb compat files are updated to account for this. Likewise, fixup the reuse of m68k's e_scalb{f,l}.c to include it's override of e_scalb.c. Otherwise, the search path finds the templated copy in the build directory. This could be futher simplified by providing an overridden template, but I lack the hardware to verify.
* Add libm_alias_finite for _finite symbolsWilco Dijkstra2020-01-036-10/+12
| | | | | | | | | | | | | | | | | | | This patch adds a new macro, libm_alias_finite, to define all _finite symbol. It sets all _finite symbol as compat symbol based on its first version (obtained from the definition at built generated first-versions.h). The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need special treatment in code that is shared between long double and float128. It is done by adding a list, similar to internal symbol redifinition, on sysdeps/ieee754/float128/float128_private.h. Alpha also needs some tricky changes to ensure we still emit 2 compat symbols for sqrt(f). Passes buildmanyglibc. Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-01376-376/+376
|
* math: enhance the endloop condition of function handle_input_flagliqingqing2019-11-071-1/+1
| | | | | | | | In the function handle_input_flag, the end-loop condition is not correct, because when the loop variable i equals 16 (num_input_flag_types), then input_flags[16] will be out of bounds. (This issue is only relevant with invalid input files to gen-auto-libm-tests.)
* Remove x64 _finite tests and referencesWilco Dijkstra2019-10-211-1/+1
| | | | | | | | | Remove _finite tests and references from x86_64. Rather than calling __exp_finite, use exp directly (since it's the same entry point). x86_64 builds and passes testsuite. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Remove finite-math testsWilco Dijkstra2019-10-2113-244/+10
| | | | | | | | | Remove the finite-math tests from the testsuite - these are no longer useful after removing math-finite.h header. Passes buildmanyglibc, build&test on x86_64 and AArch64. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Remove math-finite.hWilco Dijkstra2019-10-212-222/+1
| | | | | | | | Remove math-finite.h redirections for math functions. Passes buildmanyglibc. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07380-381/+381
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Use __attribute_pure__ macro in bits/mathcalls.hGabriel F. T. Gomes2019-09-051-2/+2
| | | | | | | | | When the const attribute of totalorder* functions was replaced with the pure attribute, by commit ID ab41100bab12, it did not use the __attribute_pure__ macro, but the __attribute__ ((__pure__)) statement. All other uses of the pure attribute in glibc use the macro. Tested for powerpc64le.
* math: Replace const attribute with pure in totalorder* functionsGabriel F. T. Gomes2019-09-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the commit commit 42760d764649ad82f5fe45a26cbdf2c2500409f7 Author: Joseph Myers <joseph@codesourcery.com> Date: Thu Aug 15 15:18:34 2019 +0000 Make totalorder and totalordermag functions take pointer arguments. the test case math/test-totalorderl-ldbl-128ibm fails on every input pair, when compiled with -O2, which is the case for glibc test suite. Debugging showed that the test case is passing arguments incorrectly to totalorderl. This can also be inferred by the fact that compiling the test case with -O0 hides the bug. The documentation for the const attribute in GCC manual reads: Note that a function that has pointer arguments and examines the data pointed to must not be declared const if the pointed-to data might change between successive invocations of the function. In general, since a function cannot distinguish data that might change from data that cannot, const functions should never take pointer or, in C++, reference arguments. Likewise, a function that calls a non-const function usually must not be const itself. Since the pointed-to data is likely to be changed by user code between invocations of totalorder*, this patch removes the const attribute from the declarations of all totalorder functions, replacing it with the pure attribute, as suggested in the manual: The pure attribute imposes similar but looser restrictions on a function’s definition than the const attribute: pure allows the function to read any non-volatile memory, even if it changes in between successive invocations of the function. Tested for powerpc64le and x86_64.
* Fix spellings of contributor names in comments and docPaul Eggert2019-08-232-2/+2
|
* Add tgmath.h macros for narrowing functions.Joseph Myers2019-08-213-20/+337
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding some of the TS 18661 narrowing functions for glibc 2.28, I deferred adding corresponding <tgmath.h> support because of unresolved questions about the specification for those type-generic macros, especially in relation to _FloatN and _FloatNx types. Those issues are now clarified in the response to Clarification Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h support. As with other tgmath.h macros, there are fairly straightforward implementations based on __builtin_tgmath for GCC 8 and later, which result in exactly the right function being called in each case, and more complicated implementations for GCC 7 and earlier, which generally result in a function being called whose arguments have the right format (i.e. an alias for the right function), but which might not be exactly the function name specified by TS 18661. In one case with older compilers (f32x* macros, where the type _Float64x exists and all the arguments have type _Float32 or _Float32x), there is a further relaxation and the function called may have arguments narrower than the one specified by the TS, but still wide enough to represent the arguments exactly, so the result of the call is unchanged (as this does not affect any case where rounding of integer arguments might be involved). With GCC 6 or before this is inherently unavoidable (but still harmless and not detectable by how the compiled program behaves, unless it redefines the functions in question like the testcases do) because _Float32x and _Float64 are both typedefs for double in that case but the specified semantics result in different functions, with different argument formats, being called for those two argument types. Tests for the new macros are handled through gen-tgmath-tests.py, which deals with the special-case handling for older GCC. Tested as follows: with the full glibc testsuite on x86_64 and x86 (with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9). * math/tgmath.h [__HAVE_FLOAT128X]: Give error. [(__HAVE_FLOAT64X && !__HAVE_FLOAT128) || (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise. (__TGMATH_2_NARROW_F): Likewise. (__TGMATH_2_NARROW_D): New macro. (__TGMATH_2_NARROW_F16): Likewise. (__TGMATH_2_NARROW_F32): Likewise. (__TGMATH_2_NARROW_F64): Likewise. (__TGMATH_2_NARROW_F32X): Likewise. (__TGMATH_2_NARROW_F64X): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise. [__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64 && (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise. [__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X && (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise. * math/gen-tgmath-tests.py (Type): Add members non_standard_real_argument_types_list, long_double_type, complex_float64_type and float32x_ext_type. (Type.__init__): Set the new members. (Type.floating_type): Add new argument floatn. (Type.real_floating_type): Likewise. (Type.can_combine_types): Likewise. (Type.combine_types): Likewise. (Type.init_types): Create internal Float32x_ext type. (Tests.__init__): Define Float32x_ext in generated C code. (Tests.add_tests): Handle narrowing functions. (Tests.add_all_tests): Likewise. (Tests.tests_text): Allow variation in mant_dig for narrowing functions with compilers before GCC 8. * math/Makefile (tgmath3-narrow-types): New variable. (tgmath3-narrow-macros): Likewise. (tgmath3-macros): Add $(tgmath3-narrow-macros).
* Correct TEST_COMPAT conditions in totalorder compat tests.Joseph Myers2019-08-162-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that the totalorder compat tests mixed TEST_COMPAT conditions using COMPAT_VER (computed as the first symbol version for the symbol being tested) and those with a hardcoded GLIBC_2_25. COMPAT_VER is logically correct here, so this patch changes the tests to use it. GLIBC_2_25 is harmless at present (even for _FloatN / _FloatNx functions added in later glibc versions). However, if in future we support _Float16 functions in glibc for any existing configuration, the test using GLIBC_2_25 would get things wrong (wrongly think that there are compat versions of totalorderf16 and totalordermagf16 to test). (The actual definitions of the compat / versioned symbols for the totalorder functions make no attempt to deal with the possibility of libm function support for a new floating-point format, already supported for other architectures in glibc, being added in some glibc configuration in future, for which the only vaguely plausible case would be if some architecture gets _Float128 support it previously lacked; this is much like functions added after glibc 2.4 not generally attempting to deal with compat support for long double changing away from having the same format as double.) Tested for x86_64, and with build-many-glibcs.py. * math/libm-test-compat_totalorder.inc (do_test) [TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Change condition to [TEST_COMPAT (libm, COMPAT_VER, GLIBC_2_31)]. * math/libm-test-compat_totalordermag.inc (do_test) [TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Likewise.
* Make totalorder and totalordermag functions take pointer arguments.Joseph Myers2019-08-1511-506/+624
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Declare some TS 18661-4 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X (current version in git, postdating the most recent public draft available as a PDF on the WG14 website) adds the interfaces from TS 18661-4, other than the reduction functions, as unconditionally required and visible in <math.h> for hosted implementations; the __STDC_WANT_IEC_60559_FUNCS_EXT__ macro is not included in C2X at all (as the reduction functions aren't included at all, expected to end up in a version of the TS updated to be relative to C2X). This patch updates the glibc headers accordingly, following the same pattern used for 18661-1 functions. As the only 18661-4 functions currently supported are the exp10 functions that have been in glibc for a very long time, this means that in fact __GLIBC_USE (IEC_60559_FUNCS_EXT) ends up being used only to determine the definition of __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X, not yet in any headers other than bits/libc-header-start.h. (I hope to add the other 18661-4 functions to glibc at some point; the main complication is the current lack of MPFR support for many of these functions.) Tested for x86_64. * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): Update comment. (__GLIBC_USE_IEC_60559_FUNCS_EXT_C2X): New macro. * bits/math-finite.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Change to [__GLIBC_USE (IEC_60559_FUNCS_EXT_C2X)]. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Likewise.
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-134-18/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
* math: Enable some math builtins for clangAdhemerval Zanella2019-03-261-6/+11
| | | | | | | | | | | | | | | This patch enable the builtin usage for clang for the C99 functions fpclassify, isfinite, isnormal, isnan, isinf, and sigbit. This allows clang optimize the calls on frontend instead of call the appropriate glibc symbols. Checked on aarch64-linux-gnu and x86_64-linux-gnu. I checked the supported version for each builtin based on released version from clang/llvm. * math/math.h (fpclassify, isfinite, isnormal, isnan): Use builtin for clang 2.8. (signbit): Use builtin for clang 3.3. (isinf): Use builtin for clang 3.7.