about summary refs log tree commit diff
path: root/math/gen-libm-test.pl
Commit message (Collapse)AuthorAgeFilesLines
* Add test infrastructure for narrowing libm functions.Joseph Myers2018-02-091-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* float128: Add test-{float128,ifloat128,float128-finite}Paul E. Murphy2017-06-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds test support for float128, and lays some groundwork for future _FloatN types. * math/gen-libm-test.pl (@all_floats): Add ifloat128 and float128. (%all_floats_pfx): Add macro prefix for float128 (FLT128). * math/libm-test-exp10.inc (pow10_test): Do not test for _FloatN, * math/libm-test-isfinite.inc (finite_test): Likewise. * math/libm-test-lgamma.inc (gamma_test): Likewise. * math/libm-test-nexttoward.inc (nexttoward_test): Likewise. (nexttoward_test_data}: Likewise. * math/libm-test-remainder.inc (drem_test): Likewise. * math/libm-test-scalb.inc (scalb_test): Likewise. (scalb_test_data): Likewise. * math/libm-test-significand.inc (significand_test): Likewise. (significand_test_data): Likewise. * math/libm-test-support.c (check_complex): Replace __complex__ FLOAT with CFLOAT to get the support for old compiler. * math/libm-test-support.h (check_complex): Likewise. * math/test-double.h (CFLOAT, TEST_FLOATN): New macros. * math/test-float.h (CFLOAT, TEST_FLOATN): Likewise. * math/test-ldouble.h (CFLOAT, TEST_FLOATN): Likewise. * math/test-float128.h: New file. * math/test-math-floatn.h: New file.
* Rework gen-libm-test.pl input/output handling.Joseph Myers2017-02-061-18/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks how input and output files are specified for gen-libm-test.pl. Previously, the script had names of various inputs and outputs hardcoded, with a -o option to specify an output directory. This patch replaces this with all inputs and outputs being specified explicitly as the arguments of options passed to the script. Outputs are only generated if the relevant option is passed, and only the processing required for the indicated outputs is done. The Makefile is made to pass options for generating libm-test-ulps.h in a separate invocation of gen-libm-test.pl from that generating libm-test.c. This is all in preparation for splitting up libm-test.inc and auto-libm-test-out and running tests separately for each function, when gen-libm-test.pl will be run separately for each function to generate the .c file but only once to generate libm-test-ulps.h (and those runs will be able to be in parallel). Tested for x86_64. The generated libm-test.c and libm-test-ulps.h are identical before and after the patch. Also tested the "make regen-ulps" case. * math/gen-libm-test.pl ($output_dir): Remove variable. ($srcdir): Likewise. ($opt_a): New variable. ($opt_c): Likewise. ($opt_C): Likewise. ($opt_H): Likewise. (-n): Make option take argument and use it as NewUlps output. (-a): New option. Use its argument for auto-libm-test-out input. (-c): New option. Use its argument for libm-test.inc input. (-C): New option. Use its argument for libm-test.c output. (-H): New option. Use its argument for libm-test-ulps.h output. (top level): Only process inputs needed to generate outputs specified by command-line options. Only generate outputs specified by command-line options. * math/README.libm-test: Update example gen-libm-test.pl command. * math/Makefile ($(objpfx)libm-test.stmp): Update gen-libm-test.pl commands. (regen-ulps): Likewise.
* XFAIL libm-test.inc tests as needed for ibm128.Joseph Myers2017-01-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch arranges for various libm-test.inc tests to be XFAILed for ibm128-libgcc in non-default rounding modes. The tests are marked with XFAIL_ROUNDING_IBM128_LIBGCC and gen-libm-test.pl is made to transform that to XFAIL_IBM128_LIBGCC or 0 depending on the rounding mode. This should allow test-ldouble, test-ildouble and test-ldouble-finite to pass with unmodified libgcc, given an ulps regeneration. (The case of patched libgcc was already clean up to ulps and possibly hypot cases very close to the overflow threshold that may need more XFAILing; patched libgcc, which should work with TEST_COND_ibm128_libgcc defined to 0 to disable all these XFAILs, does need slightly different ulps from unpatched.) Note that soft-float powerpc will still fail because of <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64811> resulting in spurious "invalid" exceptions in the libgcc code (for hard float, <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58684> hides that bug). Tested for powerpc. * math/libm-test.inc (XFAIL_IBM128_LIBGCC): New macro. (fdim_test_data): Use XFAIL_ROUNDING_IBM128_LIBGCC for some tests. (fma_test_data): Likewise. (hypot_test_data): Likewise. (log1p_test_data): Likewise. (modf_test_data): Likewise. (pow_test_data): Likewise. (remainder_test_data): Likewise. (remquo_test_data): Likewise. (scalb_test_data): Likewise. (scalbn_test_data): Likewise. (scalbln_test_data): Likewise. * math/gen-libm-test.pl (parse_args): Transform XFAIL_ROUNDING_IBM128_LIBGCC to XFAIL_IBM128_LIBGCC or 0 depending on the rounding mode.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Add fromfp functions.Joseph Myers2016-12-311-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add getpayload, getpayloadf, getpayloadl.Joseph Myers2016-10-191-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add totalorder, totalorderf, totalorderl.Joseph Myers2016-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Improve gen-libm-test.pl LIT() applicationPaul E. Murphy2016-08-051-1/+16
| | | | | | | | | | | | | | | | | | When bootstrapping float128, this exposed a number of areas where the L suffix is incorrectly applied to simple expressions when it should be applied to each constant in the expression. In order to stave off more macros in libm-test.inc, apply_lit is made slightly more intelligent. It will now split expressions based on space characters, and attempt to apply LIT() to each token. Having done this, there are numerous spacing issues within libm-test.inc which have been fixed. The above is problematic when the L real suffix is not the most expressive modifier, and the compiler complains (i.e ppc64) or silently truncates a value (i.e ppc64).
* Add more sNaN tests (most remaining real functions).Joseph Myers2016-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds tests of sNaN inputs to more functions to libm-test.inc. This covers the remaining real functions except for scalb, where there's a bug to fix, and hypot pow fmin fmax, where there are cases where a qNaN input does not result in a qNaN output and so sNaN support according to TS 18661-1 is more of a new feature. Tested for x86_64 and x86. * math/libm-test.inc (snan_value_ld): New macro. (isgreater_test_data): Add sNaN tests. (isgreaterequal_test_data): Likewise. (isless_test_data): Likewise. (islessequal_test_data): Likewise. (islessgreater_test_data): Likewise. (isunordered_test_data): Likewise. (nextafter_test_data): Likewise. (nexttoward_test_data): Likewise. (remainder_test_data): Likewise. (remquo_test_data): Likewise. (significand_test_data): Likewise. * math/gen-libm-test.pl (%beautify): Add snan_value_ld.
* Remove CHOOSE() macro from libm-tests.incPaul E. Murphy2016-06-081-11/+38
| | | | | | | | | | Use gen-libm-test.pl to generate a list of macros mapping to libm-test-ulps.h as this simplifies adding new types without having to modify a growing number of static headers each time a type is added. This also removes the final usage of the TEST_(DOUBLE|FLOAT|LDOUBLE) macros. Thus, they too are removed.
* Apply LIT(x) to floating point literals in libm-test.cPaul E. Murphy2016-06-081-5/+36
| | | | | | | | | | | | | | | | | | With the exception of the second argument of nexttoward, any suffixes should be stripped from the test input, and the macro LIT(x) should be applied to use the correct suffix for the type being tested. This adds a new argument type "j" to gen-test-libm.pl to signify an argument to a test input which does not require fixup. The test cases of nexttoward have been updated to use this new feature. This applies post-processing to all of the test inputs through gen-libm-test.pl to strip literal suffixes and apply the LIT(x) macro, with one exception stated above. This seems a bit cleaner than tossing the macro onto everything, albeit slightly more obfuscated.
* Support sNaN testing in libm-test.inc.Joseph Myers2016-05-261-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support in libm-test.inc for tests with signaling NaN arguments. gen-libm-test.pl is made to set a flag TEST_SNAN for such tests, so that they can be disabled automatically when sNaN testing isn't supported for a given type (at present, for float and double on 32-bit x86 because it's unpredictable when a value might be loaded into a floating-point register and so automatically converted to long double with sNaNs converted to quiet NaNs). -fsignaling-nans is used where needed. Tests are added for classification macros, as a starting point; this is deliberately more conservative than Thomas's patch <https://sourceware.org/ml/libc-ports/2013-04/msg00008.html>, to allow more tests to be added, and issues exposed fixed, bit by bit. Tested for x86_64 and x86. * math/libm-test.inc: Update comment about NaN testing. (TEST_SNAN): New macro. (snan_value): Likewise. (enable_test): Disable tests of sNaNs when SNAN_TESTS fails. (fpclassify_test_data): Add sNaN tests. (isfinite_test_data): Likewise. (isinf_test_data): Likewise. (isnan_test_data): Likewise. (isnormal_test_data): Likewise. (issignaling_test_data): Likewise. (signbit_test_data): Likewise. * math/gen-libm-test.pl (%beautify): Add snan_value. (show_exceptions): Add argument $test_snan. (parse_args): Handle snan_value as non-finite. Update call to show_exceptions. * math/Makefile (libm-test-no-inline-cflags): Add -fsignaling-nans.
* Fix ulps regeneration for *-finite tests.Joseph Myers2016-01-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On running tests after from-scratch ulps regeneration, I found that some libm tests failed with ulps in excess of those recorded in the from-scratch regeneration, which should never happen unless those ulps exceed the limit on ulps that can go in libm-test-ulps files. Failure: Test: atan2_upward (inf, -inf) Result: is: 2.35619498e+00 0x1.2d97ccp+1 should be: 2.35619450e+00 0x1.2d97c8p+1 difference: 4.76837159e-07 0x1.000000p-21 ulp : 2.0000 max.ulp : 1.0000 Maximal error of `atan2_upward' is : 2 ulp accepted: 1 ulp Failure: Test: carg_upward (-inf + inf i) Result: is: 2.35619498e+00 0x1.2d97ccp+1 should be: 2.35619450e+00 0x1.2d97c8p+1 difference: 4.76837159e-07 0x1.000000p-21 ulp : 2.0000 max.ulp : 1.0000 Maximal error of `carg_upward' is : 2 ulp accepted: 1 ulp The problem comes from the addition of tests for the finite-math-only versions of libm functions. Those tests share ulps with the default function variants. make regen-ulps runs the default tests before the finite-math-only tests, concatenating the resulting ulps before feeding them to gen-libm-test.pl to generate a new libm-test-ulps file. But gen-libm-test.pl always takes the last ulps value given for any (function, type) pair. So, if the largest ulps for a function come from non-finite inputs, a from-scratch regeneration loses those ulps. This patch fixes gen-libm-test.pl, in the case where there are multiple ulps values for a (function, type) pair - which can only happen as part of a regeneration - to take the largest ulps value rather than the last one. Tested for ARM / MIPS / powerpc-nofpu. * math/gen-libm-test.pl (parse_ulps): Do not reduce already-recorded ulps. * sysdeps/arm/libm-test-ulps: Regenerated. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Run libm-test tests for finite-math-only functions.Joseph Myers2015-11-051-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch arranges for the libm-test tests to be run for the finite-math-only function variants, in addition to the existing runs for out-of-line and bits/mathinline.h inline variants. gen-libm-test.pl is made to add a flag to all tests with non-finite inputs or outputs so that they can be skipped at runtime when the finite-math-only variants are being tested (skipping is for all rounding modes; that is, -ffinite-math-only is being treated as excluding overflow cases even when the rounding mode is such that the overflowed result is finite). errno setting is not tested for these variants (in general they don't set it, and it's implementation-defined in ISO C whether it's set on underflow, with the glibc definition being that it may not be for -ffinite-math-only; other cases where errno would normally be expected to be set are mostly excluded as having non-finite or overflowing arguments or results). As with the inline function tests, these ones are built with -D__FINITE_MATH_ONLY=1 to select the function variants, rather than -ffinite-math-only. Use of -ffinite-math-only would not be suitable for these tests because it would also affect libm-test.inc code that e.g. tests whether results are infinities or NaNs - if these function variants have bugs that incorrectly produce such results, we want them to show up in the tests, which means the compiler should not be optimizing the tests on the basis of results being finite. The finite-math-only functions share the same ulps settings as the main out-of-line functions. These interfaces were one significant group of untested ABIs listed at <https://sourceware.org/ml/libc-alpha/2013-07/msg00386.html>. I haven't rerun the script to list untested interfaces, but I expect that the vast bulk of interfaces there are still untested and could do with testcases being added (or, if applicable, being made compat symbols; in general, most symbols not starting '_' are safe bets to add tests for, while _* need more investigation of what the actual public API is, if any). I'd like to encourage people to help reduce the accumulation of untested interfaces by adding more tests. Tested for x86_64 and x86. Given my recent lgamma/gamma and log* fixes, the new tests pass (before those fixes, the new tests showed up those bugs, so illustrating the practical utility of having tests for these function variants). * math/libm-test.inc (NON_FINITE): New macro. (enable_test): Do not run tests flagged NON_FINITE if TEST_FINITE. * math/gen-libm-test.pl (show_exceptions): Add argument $non_finite. (parse_args): Update call to show_exceptions. * math/test-math-finite.h: New file. * math/test-math-no-finite.h: Likewise. * math/test-double-finite.c: Likewise. * math/test-float-finite.c: Likewise. * math/test-ldouble-finite.c: Likewise. * math/test-double.c: Include "test-math-no-finite.h". * math/test-float.c: Include "test-math-no-finite.h". * math/test-ldouble.c: Include "test-math-no-finite.h". * math/test-math-inline.h (TEST_FINITE): New macro. * math/test-math-vector.h (TEST_FINITE): Likewise. * math/Makefile (test-longdouble-yes): Add test-ldouble-finite. (libm-tests): Add test-float-finite and test-double-finite. ($(objpfx)test-float-finite.o): New dependency on $(objpfx)libm-test.stmp. ($(objpfx)test-double-finite.o): Likewise. ($(objpfx)test-ldouble-finite.o): Likewise. (libm-test-no-inline-cflags): New variable. (libm-test-finite-cflags): Likewise. (CFLAGS-test-float-finite.c): Likewise. (CFLAGS-test-double-finite.c): Likewise. (CFLAGS-test-ldouble-finite.c): Likewise. (CFLAGS-test-float.c): Use $(libm-test-no-inline-cflags). (CFLAGS-test-double.c): Likewise. (CFLAGS-test-ldouble.c): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Test cpow in all rounding modes.Joseph Myers2014-06-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables testing of cpow in all rounding modes using ALL_RM_TEST. There were two reasons this was previously deferred: * MPC has complicated rounding-mode-dependent rules for the signs of exact zero real or imaginary parts in the result of mpc_pow. Annex G does not impose any such requirements and I don't think glibc should try to implement any particular logic here. This patch adds support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN flag to libm-test.inc. * Error accumulations in some tests in non-default rounding modes exceed the maximum error permitted in libm-test.inc. This patch marks the problem tests with xfail-rounding. (It might be possible to reduce the accumulations a bit by using round-to-nearest when cpow calls clog, but I don't think there's much point; the implementation approach for cpow is fundamentally deficient, as discussed in the existing bug for cpow inaccuracy which can reasonably be considered to cover these less-inaccurate cases as well. It's possible that the test "cpow 2 0 10 0" will also need xfail-rounding on some platforms.) Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c: Document use of ignore-zero-inf-sign. (input_flag_type): Add value flag_ignore_zero_inf_sign. (input_flags): Add ignore-zero-inf-sign. (output_for_one_input_case): Handle flag_ignore_zero_inf_sign. * math/gen-libm-test.pl (generate_testfile): Handle ignore-zero-inf-sign. * math/auto-libm-test-in: Mark some cpow tests with ignore-zero-inf-sign and some with xfail-rounding. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cpow_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Set errno for scalb errors (bug 6803, bug 6804).Joseph Myers2014-03-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the default mode of scalb to set errno (bugs 6803 and 6804). Previously, the _LIB_VERSION == _SVID_ mode would set errno but only in some relevant cases, and with various peculiarities (such as errno setting when an exact infinity or zero result arises with an argument to scalb being an infinity). This patch leaves this mode bug-compatible, while making the default mode set errno in accordance with normal practice (so an exact infinity from an infinite argument is not an error, and nor is an exact zero result). gen-libm-test.pl is taught new notation such as ERRNO_PLUS_OFLOW to facilitate writing the tests of errno setting for underflow / overflow in libm-test.inc. Note that bug 6803 also covers scalbn and scalbln, but this patch only addresses the scalb parts of that bug (along with the whole of bug 6804). Tested x86_64 and x86. [BZ #6803] [BZ #6804] * math/w_scalb.c (__scalb): For non-SVID mode, check result and set errno as appropriate. * math/w_scalbf.c (__scalbf): Likewise. * math/w_scalbl.c (__scalbl): Likewise. * math/gen-libm-test.pl (parse_args): Handle ERRNO_PLUS_OFLOW, ERRNO_MINUS_OFLOW, ERRNO_PLUS_UFLOW and ERRNO_MINUS_UFLOW. * math/libm-test.inc (scalb_test_data): Add errno expectations. Add more NaN tests.
* Make libm-test support ALL_RM_TEST with AUTO_TESTS_*.Joseph Myers2014-03-201-93/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues improvements to all-rounding-mode libm testing by making testing with ALL_RM_TEST support test results from auto-libm-test-out. gen-libm-test.pl is adapted to generate appropriate output with results for each rounding mode, with AUTO_TESTS_* calls no longer specifying a rounding mode. Where there were separate functions in libm-test.inc to test a function in each rounding mode, using AUTO_TESTS_* to list the tests for each rounding mode, those are converted to using ALL_RM_TEST (so generally this patch doesn't change the sets of tests run in each rounding mode, except that in various cases special-case tests given directly in libm-test.inc were previously run only for round-to-nearest, and now are run for all rounding modes). Tested x86_64 and x86. * math/gen-libm-test.pl (generate_testfile): Expect only function name as argument to AUTO_TESTS_* and pass results for all rounding modes to parse_args. (parse_auto_input): Separate inputs of automatic tests from outputs before storing in %auto_tests. * math/libm-test.inc (acos_test_data): Update call to AUTO_TESTS_f_f. (acos_test): Use ALL_RM_TEST. (acos_tonearest_test_data): Remove. (acos_test_tonearest): Likewise. (acos_towardzero_test_data): Likewise. (acos_test_towardzero): Likewise. (acos_downward_test_data): Likewise. (acos_test_downward): Likewise. (acos_upward_test_data): Likewise. (acos_test_upward): Likewise. (acosh_test_data): Update call to AUTO_TESTS_f_f. (asin_test_data): Likewise. (asin_test): Use ALL_RM_TEST. (asin_tonearest_test_data): Remove. (asin_test_tonearest): Likewise. (asin_towardzero_test_data): Likewise. (asin_test_towardzero): Likewise. (asin_downward_test_data): Likewise. (asin_test_downward): Likewise. (asin_upward_test_data): Likewise. (asin_test_upward): Likewise. (asinh_test_data): Update call to AUTO_TESTS_f_f. (atan_test_data): Likewise. (atanh_test_data): Likewise. (atan2_test_data): Update call to AUTO_TESTS_ff_f. (cabs_test_data): Update call to AUTO_TESTS_c_f. (carg_test_data): Likewise. (cbrt_test_data): Update call to AUTO_TESTS_f_f. (ccos_test_data): Update call to AUTO_TESTS_c_c. (ccosh_test_data): Likewise. (cexp_test_data): Likewise. (clog_test_data): Likewise. (clog10_test_data): Likewise. (cos_test_data): Update call to AUTO_TESTS_f_f. (cos_test): Use ALL_RM_TEST. (cos_tonearest_test_data): Remove. (cos_test_tonearest): Likewise. (cos_towardzero_test_data): Likewise. (cos_test_towardzero): Likewise. (cos_downward_test_data): Likewise. (cos_test_downward): Likewise. (cos_upward_test_data): Likewise. (cos_test_upward): Likewise. (cosh_test_data): Update call to AUTO_TESTS_f_f. (cosh_test): Use ALL_RM_TEST. (cosh_tonearest_test_data): Remove. (cosh_test_tonearest): Likewise. (cosh_towardzero_test_data): Likewise. (cosh_test_towardzero): Likewise. (cosh_downward_test_data): Likewise. (cosh_test_downward): Likewise. (cosh_upward_test_data): Likewise. (cosh_test_upward): Likewise. (cpow_test_data): Update call to AUTO_TESTS_cc_c. (csqrt_test_data): Update call to AUTO_TESTS_c_c. (ctan_test_data): Likewise. (ctan_test): Use ALL_RM_TEST. (ctan_tonearest_test_data): Remove. (ctan_test_tonearest): Likewise. (ctan_towardzero_test_data): Likewise. (ctan_test_towardzero): Likewise. (ctan_downward_test_data): Likewise. (ctan_test_downward): Likewise. (ctan_upward_test_data): Likewise. (ctan_test_upward): Likewise. (ctanh_test_data): Update call to AUTO_TESTS_c_c. (ctanh_test): Use ALL_RM_TEST. (ctanh_tonearest_test_data): Remove. (ctanh_test_tonearest): Likewise. (ctanh_towardzero_test_data): Likewise. (ctanh_test_towardzero): Likewise. (ctanh_downward_test_data): Likewise. (ctanh_test_downward): Likewise. (ctanh_upward_test_data): Likewise. (ctanh_test_upward): Likewise. (erf_test_data): Update call to AUTO_TESTS_f_f. (erfc_test_data): Likewise. (exp_test_data): Likewise. (exp_test): Use ALL_RM_TEST. (exp_tonearest_test_data): Remove. (exp_test_tonearest): Likewise. (exp_towardzero_test_data): Likewise. (exp_test_towardzero): Likewise. (exp_downward_test_data): Likewise. (exp_test_downward): Likewise. (exp_upward_test_data): Likewise. (exp_test_upward): Likewise. (exp10_test_data): Update call to AUTO_TESTS_f_f. (exp10_test): Use ALL_RM_TEST. (exp10_tonearest_test_data): Remove. (exp10_test_tonearest): Likewise. (exp10_towardzero_test_data): Likewise. (exp10_test_towardzero): Likewise. (exp10_downward_test_data): Likewise. (exp10_test_downward): Likewise. (exp10_upward_test_data): Likewise. (exp10_test_upward): Likewise. (exp2_test_data): Update call to AUTO_TESTS_f_f. (expm1_test_data): Likewise. (expm1_test): Use ALL_RM_TEST. (expm1_tonearest_test_data): Remove. (expm1_test_tonearest): Likewise. (expm1_towardzero_test_data): Likewise. (expm1_test_towardzero): Likewise. (expm1_downward_test_data): Likewise. (expm1_test_downward): Likewise. (expm1_upward_test_data): Likewise. (expm1_test_upward): Likewise. (fma_test_data): Update call to AUTO_TESTS_fff_f. (fma_test): Use ALL_RM_TEST. (fma_towardzero_test_data): Remove. (fma_test_towardzero): Likewise. (fma_downward_test_data): Likewise. (fma_test_downward): Likewise. (fma_upward_test_data): Likewise. (fma_test_upward): Likewise. (hypot_test_data): Update call to AUTO_TESTS_ff_f. (j0_test_data): Update call to AUTO_TESTS_f_f. (j1_test_data): Likewise. (jn_test_data): Update call to AUTO_TESTS_if_f. (lgamma_test_data): Update call to AUTO_TESTS_f_f1. (log_test_data): Update call to AUTO_TESTS_f_f. (log10_test_data): Likewise. (log1p_test_data): Likewise. (log2_test_data): Likewise. (pow_test_data): Update call to AUTO_TESTS_ff_f. (pow_tonearest_test_data): Likewise. (sin_test_data): Update call to AUTO_TESTS_f_f. (sin_test): Use ALL_RM_TEST. (sin_tonearest_test_data): Remove. (sin_test_tonearest): Likewise. (sin_towardzero_test_data): Likewise. (sin_test_towardzero): Likewise. (sin_downward_test_data): Likewise. (sin_test_downward): Likewise. (sin_upward_test_data): Likewise. (sin_test_upward): Likewise. (sincos_test_data): Update call to AUTO_TESTS_fFF_11. (sinh_test_data): Update call to AUTO_TESTS_f_f. (sinh_test): Use ALL_RM_TEST. (sinh_tonearest_test_data): Remove. (sinh_test_tonearest): Likewise. (sinh_towardzero_test_data): Likewise. (sinh_test_towardzero): Likewise. (sinh_downward_test_data): Likewise. (sinh_test_downward): Likewise. (sinh_upward_test_data): Likewise. (sinh_test_upward): Likewise. (sqrt_test_data): Update call to AUTO_TESTS_f_f. (sqrt_test): Use ALL_RM_TEST. (sqrt_tonearest_test_data): Remove. (sqrt_test_tonearest): Likewise. (sqrt_towardzero_test_data): Likewise. (sqrt_test_towardzero): Likewise. (sqrt_downward_test_data): Likewise. (sqrt_test_downward): Likewise. (sqrt_upward_test_data): Likewise. (sqrt_test_upward): Likewise. (tan_test_data): Update call to AUTO_TESTS_f_f. (tan_test): Use ALL_RM_TEST. (tan_tonearest_test_data): Remove. (tan_test_tonearest): Likewise. (tan_towardzero_test_data): Likewise. (tan_test_towardzero): Likewise. (tan_downward_test_data): Likewise. (tan_test_downward): Likewise. (tan_upward_test_data): Likewise. (tan_test_upward): Likewise. (tanh_test_data): Update call to AUTO_TESTS_f_f. (tgamma_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Update call to AUTO_TESTS_if_f. (main): Do not call removed functions.
* Test scalbn and scalbln in all rounding modes, add more tests of negative ↵Joseph Myers2014-03-181-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arguments. Continuing the move to systematically testing libm functions in all rounding modes with ALL_RM_TEST, this patch converts the tests of scalbn and scalbln to use that macro. Those tests include cases of underflow and overflow, meaning the expected results depend on the rounding mode. For convenience in writing such tests manually, the patch adds the notation plus_oflow, minus_oflow, plus_uflow and minus_uflow for overflowing / underflowing results of each sign appropriate to the rounding mode being used, and gen-libm-test.pl is made to substitute in the appropriate values. The tests of underflow and overflow are extended to include negative arguments to provide better coverage (otherwise minus_oflow and minus_uflow wouldn't have been used at all). (A subsequent patch will make ldexp use the scalbn tests, as those functions are equivalent for binary floating point.) Tested x86_64 and x86. * math/gen-libm-test.pl (parse_args): Handle plus_oflow, minus_oflow, plus_uflow and minus_uflow in expected results. * math/libm-test.inc (scalbn_test_data): Add more tests of negative arguments. Use plus_oflow, minus_oflow, plus_uflow and minus_uflow. (scalbn_test): Use ALL_RM_TEST. (scalbln_test_data): Add more tests of negative arguments. Use plus_oflow, minus_oflow, plus_uflow and minus_uflow. (scalbln_test): Use ALL_RM_TEST.
* Add libm-test support for per-rounding-mode manually specified results.Joseph Myers2014-03-171-64/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the libm-test move towards automatic testing of all test inputs in all rounding modes by adding gen-libm-test.pl support for tests specifying results in each rounding mode manually. Previously a TEST_* line could specify arguments and results, or arguments, results and flags. Now there is the option of (arguments, results-rd, flags-rd, results-rn, flags-rn, results-rz, flags-rz, results-ru, flags-ru). This is used to replace the separate arrays of results in each rounding mode for lrint, llrint and rint. (In the case of rint, some tests were only in rint_test_data and needed to have expectations for non-default rounding modes added, which I did manually. In various cases there were slight differences in things such as the ordering of tests in the arrays for each mode.) Tested x86_64 and x86. * math/gen-libm-test.pl (parse_args): Handle results specified for each rounding mode separately. * math/libm-test.inc (lrint_test_data): Merge in per-rounding-mode tests and results from lrint_tonearest_test_data, lrint_towardzero_test_data, lrint_downward_test_data and lrint_upward_test_data. (lrint_test): Use ALL_RM_TEST. (lrint_tonearest_test_data): Remove. (lrint_test_tonearest): Likewise. (lrint_towardzero_test_data): Likewise. (lrint_test_towardzero): Likewise. (lrint_downward_test_data): Likewise. (lrint_test_downward): Likewise. (lrint_upward_test_data): Likewise. (lrint_test_upward): Likewise. (llrint_test_data): Merge in per-rounding-mode tests and results from llrint_tonearest_test_data, llrint_towardzero_test_data, llrint_downward_test_data and llrint_upward_test_data. (llrint_test): Use ALL_RM_TEST. (llrint_tonearest_test_data): Remove. (llrint_test_tonearest): Likewise. (llrint_towardzero_test_data): Likewise. (llrint_test_towardzero): Likewise. (llrint_downward_test_data): Likewise. (llrint_test_downward): Likewise. (llrint_upward_test_data): Likewise. (llrint_test_upward): Likewise. (rint_test_data): Merge in per-rounding-mode tests and results from rint_tonearest_test_data, rint_towardzero_test_data, rint_downward_test_data and rint_upward_test_data. Add per-rounding-mode results for tests not in those arrays. (rint_test): Use ALL_RM_TEST. (rint_tonearest_test_data): Remove. (rint_test_tonearest): Likewise. (rint_towardzero_test_data): Likewise. (rint_test_towardzero): Likewise. (rint_downward_test_data): Likewise. (rint_test_downward): Likewise. (rint_upward_test_data): Likewise. (rint_test_upward): Likewise. (main): Don't call removed functions.
* Prepare libm-test.inc structures for multi-rounding-mode testing.Joseph Myers2014-03-061-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present, libm-test.inc tests are run in multiple rounding modes by having a separate array for each rounding mode (which might or might not have the same test inputs as the other such arrays), a separate function calling a RUN_TEST_LOOP_* macro over that array, and a separate call to that function in main. The number of functions tested in multiple rounding modes has gradually increased as rounding-mode-specific bugs have been found and fixed in different functions. It would be better to be able to use a single macro call, in a single function, to run tests for a function over all rounding modes, with this being done for all libm functions except in cases where it's deferred until some bugs can be fixed because XFAILing all affected tests would be painful (that's why the full set of pow tests isn't currently run in all rounding modes). This patch helps prepare for that by making the structures storing expected results for tests store results for all four rounding modes. After this patch, the results for all modes are just duplicates, but tests access the appropriate field in the structure, so helping to pave the way for when the fields stop being duplicates and multiple rounding modes can be tested from a single array. Tests might in future specify a single set of results, to be used in all rounding modes; separate results for each rounding mode, specified manually; or use of auto-libm-tests-* to generate results for each rounding mode. Tested x86_64. * math/libm-test.inc (struct test_f_f_data): Move expected results into structure for each rounding mode. (struct test_ff_f_data): Likewise. (struct test_ff_f_data_nexttoward): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (RM_): New macro. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (RUN_TEST_LOOP_f_f): Update references to expected results. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_LOOP_ffI_f1): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. * math/gen-libm-test.pl (parse_args): Output four copies of expected results for each test.
* Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases.Joseph Myers2014-03-061-22/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes gen-auto-libm-tests so that, when generating test results that depend on whether the architecture has before-rounding or after-rounding tininess detection, the :before-rounding or :after-rounding conditions go on the exception / errno flags generated, rather than generating two separate lines in auto-libm-test-out for e.g. flt-32:before-rounding and flt-32:after-rounding. The rationale for this is as follows. It would be desirable for testing a libm function in all rounding modes to require just one function and array in libm-test.inc, not four (or five), with the array of test data including expected results for all rounding modes rather than separate arrays for each rounding mode that also need to repeat all the test inputs. For gen-libm-test.pl to generate data for such an array from auto-libm-test-out, it would be helpful if each (format, test input) pair has exactly four lines in auto-libm-test-out, one for each rounding mode, rather than some rounding modes having just one line and some having two because the exceptions depend on tininess detection. Tested x86_64 and x86. * math/gen-auto-libm-tests.c: Update comment on output format. (output_for_one_input_case): Generate before-rounding and after-rounding information as conditions on output flags not floating-point format. * math/auto-libm-test-out: Regenerated. * math/gen-libm-test.pl (cond_value): New function. (or_cond_value): Use cond_value. (generate_testfile): Handle conditional exceptions.
* Don't include individual test ulps in libm-test-ulps.Joseph Myers2014-03-051-73/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As recently discussed <https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it doesn't seem particularly useful for libm-test-ulps files to contain huge amounts of data on ulps for individual tests; just the global maximum observed ulps for each function, together with the verification of exceptions, errno and special results such as infinities and NaNs for each test, suffices to verify that a function's behavior on the given test inputs is within the expected accuracy. Removing this data reduces source tree churn caused by updates to these files when libm tests are added, and reduces the frequency with which testsuite additions actually need libm-test-ulps changes at all. Accordingly, this patch removes that data, so that individual tests get checked against the global bounds for the given function and only generate an error if those are exceeded. Tested x86_64 (including verifying that if an ulps value is artificially reduced, the tests do indeed fail as they should and "make regen-ulps" generates the expected changes). * math/libm-test.inc (struct ulp_data): Don't refer to ulps for individual tests in comment. (libm-test-ulps.h): Don't refer to test_ulps in #include comment. (prev_max_error): New variable. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (compare_ulp_data): Don't refer to test names in comment. (find_test_ulps): Remove function. (find_function_ulps): Likewise. (find_complex_function_ulps): Likewise. (init_max_error): Take function name as argument. Look up ulps for that function. (print_ulps): Remove function. (print_max_error): Use prev_max_error instead of calling find_function_ulps. (print_complex_max_error): Use prev_real_max_error and prev_imag_max_error instead of calling find_complex_function_ulps. (check_float_internal): Take max_ulp parameter instead of calling find_test_ulps. Don't call print_ulps. (check_float): Update call to check_float_internal. (check_complex): Update calls to check_float_internal. (START): Pass argument to init_max_error. * math/gen-libm-test.pl (%results): Don't include "kind" information. (parse_ulps): Don't handle ulps of individual tests. (print_ulps_file): Likewise. (output_ulps): Likewise. * math/README.libm-test: Update. * manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of individual tests. * sysdeps/aarch64/libm-test-ulps: Remove individual test ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/ia64/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
* Let gen-libm-test.pl find itself when run outside source directoryAndreas Schwab2014-01-271-2/+3
|
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-011-1/+1
|
* Disable libm-test test name beautification for M_* constants.Joseph Myers2013-12-191-17/+0
| | | | | | | | | | | | | | | | | | | | | math/gen-libm-test.pl has code to beautify names of various constants, transforming the source form in libm-test.inc into the version appearing in test names in libm-test-ulps files. This has become decreasingly relevant over time for the M_* constants, first as I changed the test names so only the arguments and not the expected results appeared in them, then as tests have moved to auto-libm-test-* so that automatically generated hex float constants get used instead of M_* in test inputs. This patch removes the beautification for all M_* constants. Tested x86_64 and x86 and ulps updated accordingly. Even the one case where this affected the name in the ulps files will disappear once complex function tests are moved to auto-libm-test-*. * math/gen-libm-test.pl (%beautify): Remove M_* constants. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Start generating libm tests automatically with MPFR.Joseph Myers2013-11-291-4/+181
|
* Test signs of NaNs in libm-test.inc where appropriate.Joseph Myers2013-11-161-1/+1
|
* Add libm-test support for ignored return value, add more lrint / llrint / ↵Joseph Myers2013-11-161-6/+35
| | | | lround / llround tests.
* Replace libm-test.inc TEST_INLINE conditionals with NO_TEST_INLINE flag.Joseph Myers2013-11-161-1/+1
|
* Remove libm-test START_DATA and END_DATA.Joseph Myers2013-05-241-8/+0
|
* Make libm-test START and END into ordinary macros.Joseph Myers2013-05-241-28/+0
|
* Don't include function names in test data in generated libm-test.c.Joseph Myers2013-05-221-15/+12
|
* Don't include expected results in libm-test test names.Joseph Myers2013-05-221-4/+1
|
* Handle sincos with generic libm-test logic.Joseph Myers2013-05-191-34/+2
|
* Simplify gen-libm-test.pl handling of tests with extra outputs.Joseph Myers2013-05-191-65/+17
|
* Make libm-test look up ulps by name at runtime.Joseph Myers2013-05-181-90/+71
|
* Simplify libm-test extra-output initialization.Joseph Myers2013-05-171-4/+4
|
* Remove libm-test support for TEST_* inside functions.Joseph Myers2013-05-161-72/+19
|
* Convert TEST_c_c tests from code to data.Joseph Myers2013-05-121-2/+2
|
* Start converting libm tests from code to data.Joseph Myers2013-05-101-23/+78
|
* Move some libm-test logic for running tests from gen-libm-test.pl to ↵Joseph Myers2013-05-081-75/+80
| | | | libm-test.inc.
* Initialize x in frexp, modf, remqou tests.Joseph Myers2013-05-061-0/+3
|
* Remove unused libm-test expected-failure mechanism.Joseph Myers2013-05-041-61/+5
|
* Integrate errno testing better in libm-test.inc.Joseph Myers2013-04-291-1/+1
|
* New <math.h> macro named issignaling to check for a signaling NaN (sNaN).Thomas Schwinge2013-04-021-1/+1
| | | | It is based on draft TS 18661 and currently enabled as a GNU extension.
* libm-test: Properly wrap blocks consisting of several statements.Thomas Schwinge2013-03-211-8/+14
|