about summary refs log tree commit diff
path: root/math/bits/mathcalls.h
Commit message (Collapse)AuthorAgeFilesLines
* Implement C23 exp2m1, exp10m1Joseph Myers2024-06-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C23 adds various <math.h> function families originally defined in TS 18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and exp10(x)-1, like expm1). As with other such functions, these use type-generic templates that could be replaced with faster and more accurate type-specific implementations in future. Test inputs are copied from those for expm1, plus some additions close to the overflow threshold (copied from exp2 and exp10) and also some near the underflow threshold. exp2m1 has the unusual property of having an input (M_MAX_EXP) where whether the function overflows (under IEEE semantics) depends on the rounding mode. Although these could reasonably be XFAILed in the testsuite (as we do in some cases for arguments very close to a function's overflow threshold when an error of a few ulps in the implementation can result in the implementation not agreeing with an ideal one on whether overflow takes place - the testsuite isn't smart enough to handle this automatically), since these functions aren't required to be correctly rounding, I made the implementation check for and handle this case specially. The Makefile ordering expected by lint-makefiles for the new functions is a bit peculiar, but I implemented it in this patch so that the test passes; I don't know why log2 also needed moving in one Makefile variable setting when it didn't in my previous patches, but the failure showed a different place was expected for that function as well. The powerpc64le IFUNC setup seems not to be as self-contained as one might hope; it shouldn't be necessary to add IFUNCs for new functions such as these simply to get them building, but without setting up IFUNCs for the new functions, there were undefined references to __GI___expm1f128 (that IFUNC machinery results in no such function being defined, but doesn't stop include/math.h from doing the redirection resulting in the exp2m1f128 and exp10m1f128 implementations expecting to call it). Tested for x86_64 and x86, and with build-many-glibcs.py.
* Implement C23 log10p1Joseph Myers2024-06-171-0/+3
| | | | | | | | | | | | | | C23 adds various <math.h> function families originally defined in TS 18661-4. Add the log10p1 functions (log10(1+x): like log1p, but for base-10 logarithms). This is directly analogous to the log2p1 implementation (except that whereas log2p1 has a smaller underflow range than log1p, log10p1 has a larger underflow range). The test inputs are copied from those for log1p and log2p1, plus a few more inputs in that wider underflow range. Tested for x86_64 and x86, and with build-many-glibcs.py.
* Implement C23 logp1Joseph Myers2024-06-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | C23 adds various <math.h> function families originally defined in TS 18661-4. Add the logp1 functions (aliases for log1p functions - the name is intended to be more consistent with the new log2p1 and log10p1, where clearly it would have been very confusing to name those functions log21p and log101p). As aliases rather than new functions, the content of this patch is somewhat different from those actually adding new functions. Tests are shared with log1p, so this patch *does* mechanically update all affected libm-test-ulps files to expect the same errors for both functions. The vector versions of log1p on aarch64 and x86_64 are *not* updated to have logp1 aliases (and thus there are no corresponding header, tests, abilist or ulps changes for vector functions either). It would be reasonable for such vector aliases and corresponding changes to other files to be made separately. For now, the log1p tests instead avoid testing logp1 in the vector case (a Makefile change is needed to avoid problems with grep, used in generating the .c files for vector function tests, matching more than one ALL_RM_TEST line in a file testing multiple functions with the same inputs, when it assumes that the .inc file only has a single such line). Tested for x86_64 and x86, and with build-many-glibcs.py.
* Implement C23 log2p1Joseph Myers2024-05-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | C23 adds various <math.h> function families originally defined in TS 18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for base-2 logarithms). This illustrates the intended structure of implementations of all these function families: define them initially with a type-generic template implementation. If someone wishes to add type-specific implementations, it is likely such implementations can be both faster and more accurate than the type-generic one and can then override it for types for which they are implemented (adding benchmarks would be desirable in such cases to demonstrate that a new implementation is indeed faster). The test inputs are copied from those for log1p. Note that these changes make gen-auto-libm-tests depend on MPFR 4.2 (or later). The bulk of the changes are fairly generic for any such new function. (sysdeps/powerpc/nofpu/Makefile only needs changing for those type-generic templates that use fabs.) Tested for x86_64 and x86, and with build-many-glibcs.py.
* Refer to C23 in place of C2X in glibcJoseph Myers2024-02-011-7/+7
| | | | | | | | | | | | | | | WG14 decided to use the name C23 as the informal name of the next revision of the C standard (notwithstanding the publication date in 2024). Update references to C2X in glibc to use the C23 name. This is intended to update everything *except* where it involves renaming files (the changes involving renaming tests are intended to be done separately). In the case of the _ISOC2X_SOURCE feature test macro - the only user-visible interface involved - support for that macro is kept for backwards compatibility, while adding _ISOC23_SOURCE. Tested for x86_64.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2024-01-011-1/+1
|
* Fix all the remaining misspellings -- BZ 25337Paul Pluzhnikov2023-06-021-1/+1
|
* Update copyright dates with scripts/update-copyrightsJoseph Myers2023-01-061-1/+1
|
* Update copyright dates with scripts/update-copyrightsPaul Eggert2022-01-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
* x86-64: Add vector tan/tanf implementation to libmvecSunil K Pandey2021-12-301-1/+1
| | | | | | | | Implement vectorized tan/tanf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector tan/tanf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector erfc/erfcf implementation to libmvecSunil K Pandey2021-12-301-1/+1
| | | | | | | | Implement vectorized erfc/erfcf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector erfc/erfcf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector asinh/asinhf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized asinh/asinhf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector asinh/asinhf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector tanh/tanhf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized tanh/tanhf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector tanh/tanhf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector erf/erff implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized erf/erff containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector erf/erff with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector acosh/acoshf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized acosh/acoshf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector acosh/acoshf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector atanh/atanhf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized atanh/atanhf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector atanh/atanhf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector log1p/log1pf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized log1p/log1pf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector log1p/log1pf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector log2/log2f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized log2/log2f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector log2/log2f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector log10/log10f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized log10/log10f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector log10/log10f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector atan2/atan2f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized atan2/atan2f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector atan2/atan2f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector cbrt/cbrtf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized cbrt/cbrtf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector cbrt/cbrtf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector sinh/sinhf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized sinh/sinhf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector sinh/sinhf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector expm1/expm1f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized expm1/expm1f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector expm1/expm1f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector cosh/coshf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized cosh/coshf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector cosh/coshf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector exp10/exp10f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized exp10/exp10f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector exp10/exp10f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector exp2/exp2f implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized exp2/exp2f containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector exp2/exp2f with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector hypot/hypotf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized hypot/hypotf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector hypot/hypotf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector asin/asinf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized asin/asinf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector asin/asinf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector atan/atanf implementation to libmvecSunil K Pandey2021-12-291-1/+1
| | | | | | | | Implement vectorized atan/atanf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector atan/atanf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector acos/acosf implementation to libmvecSunil K Pandey2021-12-221-1/+1
| | | | | | | | Implement vectorized acos/acosf containing SSE, AVX, AVX2 and AVX512 versions for libmvec as per vector ABI. It also contains accuracy and ABI tests for vector acos/acosf with regenerated ulps. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* Do not declare fmax, fmin _FloatN, _FloatNx versions for C2XJoseph Myers2021-09-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the last WG14 meeting, <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2711.htm> was accepted, which places more emphasis on the new fmaximum / fminimum functions and less on the old fmax / fmin functions. Some of the changes are to examples, notes or otherwise don't require implementation changes. However, the changes include removing the _FloatN / _FloatNx versions of the fmax and fmin functions that came from TS 18661-3. Thus, those function versions should only be declared under similar conditions to the _FloatN / _FloatNx versions of fmaxmag and fminmag: for _GNU_SOURCE and pre-C2X use of __STDC_WANT_IEC_60559_TYPES_EXT__, but not for C2X without _GNU_SOURCE. In turn this requires a tgmath.h change so that the corresponding tgmath.h macros, for C2X with __STDC_WANT_IEC_60559_TYPES_EXT__ but without _GNU_SOURCE, don't try to use function variants that aren't declared. (That issue doesn't arise for the tgmath.h macros for fmaxmag and fminmag, because those aren't defined at all in those circumstances unless __STDC_WANT_IEC_60559_BFP_EXT__ (from TS 18661-1 and not specified at all by C2X) is also defined, and in that case the _FloatN / _FloatNx versions of fmaxmag and fminmag get declared - this is only ever an issue when it's possible for some functions corresponding to a type-generic-macro to be declared, and for _FloatN / _FloatNx functions in general to be declared, but without the _FloatN / _FloatNx functions corresponding to that particular macro being declared.) Tested for x86_64.
* Add fmaximum, fminimum functionsJoseph Myers2021-09-281-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds new <math.h> functions for floating-point maximum and minimum, corresponding to the new operations that were added in IEEE 754-2019 because of concerns about the old operations not being associative in the presence of signaling NaNs. fmaximum and fminimum handle NaNs like most <math.h> functions (any NaN argument means the result is a quiet NaN). fmaximum_num and fminimum_num handle both quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if one argument is a number and the other is a NaN, return the number), but still raise "invalid" for a signaling NaN argument, making them exceptions to the normal rule that a function with a floating-point result raising "invalid" also returns a quiet NaN. fmaximum_mag, fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding functions returning the argument with greatest or least absolute value. All these functions also treat +0 as greater than -0. There are also corresponding <tgmath.h> type-generic macros. Add these functions to glibc. The implementations use type-generic templates based on those for fmax, fmin, fmaxmag and fminmag, and test inputs are based on those for those functions with appropriate adjustments to the expected results. The RISC-V maintainers might wish to add optimized versions of fmaximum_num and fminimum_num (for float and double), since RISC-V (F extension version 2.2 and later) provides instructions corresponding to those functions - though it might be at least as useful to add architecture-independent built-in functions to GCC and teach the RISC-V back end to expand those functions inline, which is what you generally want for functions that can be implemented with a single instruction. Tested for x86_64 and x86, and with build-many-glibcs.py.
* Update floating-point feature test macro handling for C2XJoseph Myers2021-06-011-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ISO C2X has made some changes to the handling of feature test macros related to features from the floating-point TSes, and to exactly what such features are present in what headers, that require corresponding changes in glibc. * For the few features that were controlled by __STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in C2X, there is now instead a new feature test macro __STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP. This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I implemented support for the new feature test macro for GCC 11) and the totalorder and payload functions in <math.h>. C2X no longer says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's appropriate for that macro to continue to enable exactly the features from TS 18661-1). * The SNAN macros for each floating-point type have moved to <float.h> (and been renamed in the process). Thus, the copies in <math.h> should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for C2X. * The fmaxmag and fminmag functions have been removed (replaced by new functions for the new min/max operations in IEEE 754-2019). Thus those should also only be declared for __STDC_WANT_IEC_60559_BFP_EXT__. * The _FloatN / _FloatNx handling for the last two points in glibc is trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X (the integration of TS 18661-3 as an Annex, that is, which hasn't yet been merged into the C standard git repository but has been accepted by WG14), so C2X with that macro should not declare some things that are declared for older standards with that macro. The approach taken here is to provide the declarations (when __STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined __USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled then those declarations (that are only in TS 18661-3 and not in C2X) will only be provided if _GNU_SOURCE is defined as well. Thus _GNU_SOURCE remains a superset of the TS features as well as of C2X. Some other somewhat related changes in C2X are not addressed here. There's an open proposal not to include the fmin and fmax functions for the _FloatN / _FloatNx types, given the new min/max operations, which could be handled like the previous point if adopted. And the fromfp functions have been changed to return a result in floating type rather than intmax_t / uintmax_t; my inclination there is to treat that like that change of totalorder type (new symbol versions etc. for the ABI change; old versions become compat symbols and are no longer supported as an API). Tested for x86_64 and x86.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-021-1/+1
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* ldbl-128ibm-compat: Redirect long double functions to f128/ieee128 functionsTulio Magno Quites Machado Filho2020-02-281-3/+6
| | | | | | | | | | | | | | | | Modify the headers to redirect long double functions to global __*f128 symbols or to __*ieee128 otherwise. Most of the functions in math.h benefit from the infrastructure already available for __LDBL_COMPAT. The only exceptions are nexttowardf and nexttoward that need especial treatment. Both math/bits/mathcalls-helper-functions.h and math/bits/mathcalls.h were modified in order to provide alternative redirection destinations that are essential to support functions that should not be redirected to the same name pattern of the rest of the functions, i.e.: __fpclassify, __signbit, __iseqsig, __issignaling, isinf, finite and isnan, which will be redirected to __*f128 instead of __*ieee128 used for the rest.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-011-1/+1
|
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Use __attribute_pure__ macro in bits/mathcalls.hGabriel F. T. Gomes2019-09-051-2/+2
| | | | | | | | | When the const attribute of totalorder* functions was replaced with the pure attribute, by commit ID ab41100bab12, it did not use the __attribute_pure__ macro, but the __attribute__ ((__pure__)) statement. All other uses of the pure attribute in glibc use the macro. Tested for powerpc64le.
* math: Replace const attribute with pure in totalorder* functionsGabriel F. T. Gomes2019-09-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the commit commit 42760d764649ad82f5fe45a26cbdf2c2500409f7 Author: Joseph Myers <joseph@codesourcery.com> Date: Thu Aug 15 15:18:34 2019 +0000 Make totalorder and totalordermag functions take pointer arguments. the test case math/test-totalorderl-ldbl-128ibm fails on every input pair, when compiled with -O2, which is the case for glibc test suite. Debugging showed that the test case is passing arguments incorrectly to totalorderl. This can also be inferred by the fact that compiling the test case with -O0 hides the bug. The documentation for the const attribute in GCC manual reads: Note that a function that has pointer arguments and examines the data pointed to must not be declared const if the pointed-to data might change between successive invocations of the function. In general, since a function cannot distinguish data that might change from data that cannot, const functions should never take pointer or, in C++, reference arguments. Likewise, a function that calls a non-const function usually must not be const itself. Since the pointed-to data is likely to be changed by user code between invocations of totalorder*, this patch removes the const attribute from the declarations of all totalorder functions, replacing it with the pure attribute, as suggested in the manual: The pure attribute imposes similar but looser restrictions on a function’s definition than the const attribute: pure allows the function to read any non-volatile memory, even if it changes in between successive invocations of the function. Tested for powerpc64le and x86_64.
* Make totalorder and totalordermag functions take pointer arguments.Joseph Myers2019-08-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Declare some TS 18661-4 interfaces for C2X.Joseph Myers2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X (current version in git, postdating the most recent public draft available as a PDF on the WG14 website) adds the interfaces from TS 18661-4, other than the reduction functions, as unconditionally required and visible in <math.h> for hosted implementations; the __STDC_WANT_IEC_60559_FUNCS_EXT__ macro is not included in C2X at all (as the reduction functions aren't included at all, expected to end up in a version of the TS updated to be relative to C2X). This patch updates the glibc headers accordingly, following the same pattern used for 18661-1 functions. As the only 18661-4 functions currently supported are the exp10 functions that have been in glibc for a very long time, this means that in fact __GLIBC_USE (IEC_60559_FUNCS_EXT) ends up being used only to determine the definition of __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X, not yet in any headers other than bits/libc-header-start.h. (I hope to add the other 18661-4 functions to glibc at some point; the main complication is the current lack of MPFR support for many of these functions.) Tested for x86_64. * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): Update comment. (__GLIBC_USE_IEC_60559_FUNCS_EXT_C2X): New macro. * bits/math-finite.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Change to [__GLIBC_USE (IEC_60559_FUNCS_EXT_C2X)]. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Likewise.
* Declare most TS 18661-1 interfaces for C2X.Joseph Myers2019-08-131-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Do not use const attribute for nan functions (bug 23277).Joseph Myers2018-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | As in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86113 for __builtin_nan, bits/mathcalls.h wrongly declares the nan function with the __const__ attribute. Because the function reads memory pointed to by an argument, it's only pure, not const. This patch removes the incorrect attribute and adds a testcase for the bug. No __pure__ attribute is added to replace the incorrect __const__ one, since that would introduce problems when using GCC versions that have the incorrect built-in __const__ attribute and warn for the combination of those two attributes. Tested for x86_64. [BZ #23277] * math/bits/mathcalls.h [__USE_ISOC99] (nan): Do not use __const__ attribute. * math/test-nan-const.c: New file. * math/Makefile (tests): Add test-nan-const. (CFLAGS-test-nan-const.c): New variable.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* [BZ #22593] Fix nextafter and nexttoward declarationSzabolcs Nagy2017-12-121-2/+2
| | | | | | | | These functions set errno and thus the const attribute was wrong. [BZ #22593] * math/bits/mathcalls.h (nextafter): Remove const. (nexttoward): Likewise.
* Obsolete pow10 functions.Joseph Myers2017-09-011-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* float128: Add public _Float128 declarations to libm.Paul E. Murphy2017-05-151-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces the machine-dependent bits/floatn.h to control the inclusion of _Float128 ABI. * bits/floatn.h: New file. * bits/huge_val_flt128.h: Likewise. * bits/libm-simd-decl-stubs.h (__DECL_SIMD_cosf128): New macro. (__DECL_SIMD_sinf128): Likewise. (__DECL_SIMD_sincosf128): Likewise. (__DECL_SIMD_logf128): Likewise. (__DECL_SIMD_expf128): Likewise. (__DECL_SIMD_powf128): Likewise. * math/Makefile (headers): Install bits/floatn.h and bits/huge_val_flt128.h. * math/bits/cmathcalls.h (_Mdouble_complex_): Only define if not defined. * math/bits/mathcalls.h (pow10, isinf, finite, drem, significand) (isnan, gamma, nexttoward, scalb): Only define if not __MATH_DECLARING_FLOATN. (nextdown, nextup, llogb, roundeven, fromfp, ufromfp, fromfpx) (ufromfpx, fmaxmag, fminmag, totalorder, totalordermag) (canonicalize, getpayload, setpayload, setpayloadsig): Declare for _FloatN even if __STDC_WANT_IEC_60559_BFP_EXT__ is not defined. * math/complex.h: Include bits/libc-header-start.h and bits/floatn.h. Include bits/cmathcalls.h to get the declarations of _Float128 versions of complex functions. [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)] (CMPLXF128): Define macro. * math/math.h: Include bits/floatn.h and bits/huge_val_flt128.h. Include bits/mathcalls-helper-functions.h and bits/mathcalls.h to get the declarations of _Float128 versions of math functions. (__MATH_DECLARING_FLOATN): New macro to control declaration of _FloatN types. [__GNUC_PREREQ (6,0)] (signbit): Since GCC 6.0, __builtin_signbit is type-generic, so use it without __MATH_TG. [__HAVE_DISTINCT_FLOAT128] (isinf): This builtin is broken for _Float128 type on GCC < 7.0. Explicitly call __isinff128 for _Float128 type and GCC < 7.0, otherwise use the builtin. [__HAVE_FLOAT128 && defined __USE_GNU] (M_Ef128, M_LOG2Ef128) (M_LOG10Ef128, M_LN2f128, M_LN10f128, M_PIf128, M_PI_2f128) (M_PI_4f128, M_1_PIf128, M_2_PIf128, M_SQRT2f128, M_SQRT1_2f128): New _GNU_SOURCE enabled macros.
* Remove C++ namespace handling from glibc headers.Joseph Myers2017-03-161-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc headers include some code (not particularly consistent or systematic) to put various declarations in C++ namespaces std and __c99, if _GLIBCPP_USE_NAMESPACES is defined. As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>, this macro was removed from libstdc++ in 2000. I don't expect compilation with such old versions of libstdc++ to work with current glibc headers anyway (whereas old *binaries* are expected to stay working with current glibc); this patch (which should be a no-op with any libstdc++ version postdating that removal) removes all this code from the glibc headers. The begin-end-check.pl test, whose comments say it is about checking these namespace macro calls, is also removed. The code in that test would have covered __BEGIN_DECLS / __END_DECLS as well, but if those weren't properly matched it would show up with the check-installed-headers-cxx tests, so I don't think there is an actual use for keeping begin-end-check.pl with the namespace code removed. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro. (__END_NAMESPACE_STD): Likewise. (__USING_NAMESPACE_STD): Likewise. (__BEGIN_NAMESPACE_C99): Likewise. (__END_NAMESPACE_C99): Likewise. (__USING_NAMESPACE_C99): Likewise. * math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and undefine macro. (_Mdouble_END_NAMESPACE): Likewise. * ctype/ctype.h: Do not handle C++ namespaces. * libio/bits/stdio-ldbl.h: Likewise. * libio/stdio.h: Likewise. * locale/locale.h: Likewise. * math/bits/mathcalls.h: Likewise. * setjmp/setjmp.h: Likewise. * signal/signal.h: Likewise. * stdlib/bits/stdlib-float.h: Likewise. * stdlib/bits/stdlib-ldbl.h: Likewise. * stdlib/stdlib.h: Likewise. * string/string.h: Likewise. * sysdeps/x86/fpu/bits/mathinline.h: Likewise. * time/bits/types/clock_t.h: Likewise. * time/bits/types/struct_tm.h: Likewise. * time/bits/types/time_t.h: Likewise. * time/time.h: Likewise. * wcsmbs/bits/wchar-ldbl.h: Likewise. * wcsmbs/uchar.h: Likewise. * wcsmbs/wchar.h: Likewise. [_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition. * wctype/wctype.h: Do not handle C++ namespaces. * scripts/begin-end-check.pl: Remove. * Makefile (installed-headers): Likewise. (tests-special): Do not add $(objpfx)begin-end-check.out. ($(objpfx)begin-end-check.out): Remove.
* Split helper classification macros from mathcalls.hGabriel F. T. Gomes2017-03-151-28/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The classification macros: finite, fpclassify, iseqsig, isinf, isnan, issignaling, and signbit are defined by ISO C11 and declared in mathcalls.h for each of the floating-point types: float, double, and long double. TS 18661-3 does not mention these macros for float128, however support for them must be present when _Float128 is present. This is true, even when the feature test macro __STDC_WANT_IEC_60559_TYPES_EXT__ is false. Other function declarations in mathcalls.h, on the other hand, depend on __STDC_WANT_IEC_60559_TYPES_EXT__. This patch splits the helper functions (__finite, __fpclassify, __iseqsig, __isinf, __isnan, __issignaling, and __signbit) from mathcalls.h, so that these helper functions can be declared for _Float128, even when __STDC_WANT_IEC_60559_TYPES_EXT__ is false. Tested for powerpc64le, s390x, and x86_64. * include/bits/mathcalls-helper-functions.h: New file. * math/Makefile (headers): Add bits/mathcalls-helper-functions.h. * math/bits/mathcalls.h (__finite, __fpclassify, __iseqsig) (__isinf, __isnan, __issignaling, __signbit): Move declarations to math/bits/mathcalls-helper-functions.h. * math/bits/mathcalls-helper-functions.h: New file. * math/math.h: Include bits/mathcalls-helper-functions.h for float, double, and long double.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-05 06:57:41 +0000