about summary refs log tree commit diff
path: root/math/auto-libm-test-in
Commit message (Collapse)AuthorAgeFilesLines
* Improve libm-test XFAILing for ibm128-libgcc.Joseph Myers2017-01-091-188/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch further improves XFAILing for ibm128-libgcc of tests in auto-libm-test-*. The bulk of the cases needing XFAILing are xfail-rounding:ibm128-libgcc used for inputs where (possibly after rounding the inputs to another floating-point type) the result overflows (and the result in non-default rounding modes may be wildly wrong with unpatched libgcc) or underflows near 0 (and the result in non-default rounding modes may end up having the wrong sign). This patch makes gen-auto-libm-tests detect such cases and apply xfail-rounding:ibm128-libgcc automatically to them, so most of the manual XFAILs in auto-libm-test-in are no longer needed (some are still needed if e.g. the result is very close to overflow, resulting in an internal overflow in libgcc in some rounding modes). A few manual XFAILs are added for cases not covered by this gen-auto-libm-tests change, and a few existing such XFAILs are left in. Tested for powerpc. * math/gen-auto-libm-tests.c (output_for_one_input_case): Apply xfail-rounding:ibm128-libgcc automatically to tests overflowing and those that can underflow to zero. * math/auto-libm-test-in: Remove most XFAILs for ibm128-libgcc and add others. * math/auto-libm-test-out: Regenerated.
* Update libm-test XFAILs for ibm128 format.Joseph Myers2017-01-041-213/+198
| | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up and updates the libm-test XFAILs for the ibm128 format. More of them are changed to use a new ibm128-libgcc conditional, to reflect that they are not in fact needed if you've patched libgcc to fix the known issues (at substantial performance cost). Many additional XFAILs are added for tests that fail with unpatched libgcc (most but not all of them xfail-rounding). Note that further such fixes will be needed for test-ldouble actually to pass with default libgcc (in particular, XFAILs for pow tests and for various affected tests directly embedded in libm-test.inc). With patched libgcc, there may be a few XFAILs needed but the results are already substantially clean apart from a few ulps differences. Tested for powerpc. * math/libm-test.inc (TEST_COND_ibm128_libgcc): New macro. (init_max_error) [TEST_COND_ibm128]: Increase maximum error allowed to 16 ulps. * math/auto-libm-test-in: Change most XFAILs for ibm128 to use ibm128-libgcc. XFAIL more tests for ibm128-libgcc. * math/auto-libm-test-out: Regenerated.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Fix cos computation for multiple precision fallback (bz #20357)Siddhesh Poyarekar2016-07-181-0/+3
| | | | | | | | | | | | | | | | | | | | During the sincos consolidation I made two mistakes, one was a logical error due to which cos(0x1.8475e5afd4481p+0) returned sin(0x1.8475e5afd4481p+0) instead. The second issue was an error in negating inputs for the correct quadrants for sine. I could not find a suitable test case for this despite running a program to search for such an input for a couple of hours. Following patch fixes both issues. Tested on x86_64. Thanks to Matt Clay for identifying the issue. [BZ #20357] * sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition to call __mpsin/__mpcos and to negate values. * math/auto-libm-test-in: Add test. * math/auto-libm-test-out: Regenerate.
* Remove type specific information from auto-libm-test-inPaul E. Murphy2016-06-081-57/+58
| | | | | | | | | | | | | Apply the following sed regexes to auto-libm-test-in in order: s/flt-32/binary32/ s/dbl-64/binary64/ s/ldbl-96-intel/intel96/ s/ldbl-96-m68k/m68k96/ s/ldbl-128ibm/ibm128/ s/ldbl-128/binary128/ and fixup ldbl-96 comment manually.
* Implement proper fmal for ldbl-128ibm (bug 13304).Joseph Myers2016-05-191-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ldbl-128ibm had an implementation of fmal that just did (x * y) + z in most cases, with no attempt at actually being a fused operation. This patch replaces it with a genuine fused operation. It is not necessarily correctly rounding, but should produce a result at least as accurate as the long double arithmetic operations in libgcc, which I think is all that can reasonably be expected for such a non-IEEE format where arithmetic is approximate rather than rounded according to any particular rule for determining the exact result. Like the libgcc arithmetic, it may produce spurious overflow and underflow results, and it falls back to the libgcc multiplication in the case of (finite, finite, zero). This concludes the fixes for bug 13304; any subsequently found fma issues should go in separate Bugzilla bugs. Various other pieces of bug 13304 were fixed in past releases over the past several years. Tested for powerpc. [BZ #13304] * sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Include <fenv.h>, <float.h>, <math_private.h> and <stdlib.h>. (add_split): New function. (mul_split): Likewise. (ext_val): New typedef. (store_ext_val): New function. (mul_ext_val): New function. (compare): New function. (add_split_ext): New function. (__fmal): After checking for Inf, NaN and zero, compute result as an exact sum of scaled double values in round-to-nearest before adding those up and adjusting for other rounding modes. * math/auto-libm-test-in: Remove xfail-rounding:ldbl-128ibm from tests of fma. * math/auto-libm-test-out: Regenerated.
* Fix x86_64 / x86 powl inaccuracy for integer exponents (bug 19848).Joseph Myers2016-03-241-0/+38
| | | | | | | | | | | | | | | | | | | | | | | Bug 19848 reports cases where powl on x86 / x86_64 has error accumulation, for small integer exponents, larger than permitted by glibc's accuracy goals, at least in some rounding modes. This patch further restricts the exponent range for which the small-integer-exponent logic is used to limit the possible error accumulation. Tested for x86_64 and x86 and ulps updated accordingly. [BZ #19848] * sysdeps/i386/fpu/e_powl.S (p3): Rename to p2 and change value from 8 to 4. (__ieee754_powl): Compare integer exponent against 4 not 8. * sysdeps/x86_64/fpu/e_powl.S (p3): Rename to p2 and change value from 8 to 4. (__ieee754_powl): Compare integer exponent against 4 not 8. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Add more tests of pow.Joseph Myers2015-11-101-0/+1
| | | | | | | | | | | | | Prompted by a gcc-patches discussion, this patch adds tests of pow for the cases where pow (x, 0.5) is required to return a different result from sqrt (x), as those cases were previously missing from the tests (although they worked correctly). Tested for x86_64 and x86. * math/auto-libm-test-in: Add another test of pow. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (pow_test_data): Add another test.
* Add more libm tests (scalb*, signbit, sin, sincos, sinh, sqrt, tan, tanh, ↵Joseph Myers2015-11-041-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | tgamma, y0, y1, yn, significand). This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of sin, sincos, sinh, sqrt, tan, tanh, y0, y1 and yn. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (scalb_test_data): Add more tests. (scalbn_test_data): Likewise. (scalbln_test_data): Likewise. (signbit_test_data): Likewise. (sin_test_data): Likewise. (sincos_test_data): Likewise. (sinh_test_data): Likewise. (sqrt_test_data): Likewise. (tan_test_data): Likewise. (tanh_test_data): Likewise. (tgamma_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Likewise. (significand_test_data): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Add more libm tests (ilogb, is*, j0, j1, jn, lgamma, log*).Joseph Myers2015-10-231-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of log, log10, log1p and log2. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (MAX_EXP): New macro. (ilogb_test_data): Add more tests. (isfinite_test_data): Likewise. (isgreater_test_data): Likewise. (isgreaterequal_test_data): Likewise. (isinf_test_data): Likewise. (isless_test_data): Likewise. (islessequal_test_data): Likewise. (islessgreater_test_data): Likewise. (isnan_test_data): Likewise. (isnormal_test_data): Likewise. (issignaling_test_data): Likewise. (isunordered_test_data): Likewise. (j0_test_data): Likewise. (j1_test_data): Likewise. (jn_test_data): Likewise. (lgamma_test_data): Likewise. (log_test_data): Likewise. (log10_test_data): Likewise. (log1p_test_data): Likewise. (log2_test_data): Likewise. (logb_test_data): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* Fix j1, jn missing errno setting on underflow (bug 18611).Joseph Myers2015-10-231-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | j1 and jn can underflow for small arguments, but fail to set errno when underflowing to 0. This patch fixes them to set errno in that case. Tested for x86_64, x86, mips64 and powerpc. [BZ #18611] * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and avoid excess range and precision on underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Do not allow missing errno setting for tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
* Add more libm tests (fmod, fpclassify, frexp, hypot, ilogb, j0, j1, jn, log, ↵Joseph Myers2015-10-211-0/+64
| | | | | | | | | | | | | | | | | | | log10, log2). This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. 2015-10-21 Joseph Myers <joseph@codesourcery.com> * math/auto-libm-test-in: Add more tests of hypot, j0, j1, jn, log, log10 and log2. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fmod_test_data): Add more tests. (fpclassify_test_data): Likewise. (frexp_test_data): Likewise. (hypot_test_data): Likewise. (ilogb_test_data): Likewise.
* Fix ldbl-128 / ldbl-128ibm lgamma overflow handling (bug 16347, bug 19046).Joseph Myers2015-10-011-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with its handling of large arguments. It has an overflow threshold that is correct only for ldbl-128, despite being used for both types - with diagnostic control macros as a temporary measure to disable warnings about that constant overflowing for ldbl-128ibm - and it has a calculation that's roughly x * log(x) - x, resulting in overflows for arguments that are roughly at most a factor 1/log(threshold) below the overflow threshold. This patch fixes both issues, using an overflow threshold appropriate for the type in question and adding another case for large arguments that avoids the possible intermediate overflow. Tested for x86_64, x86, mips64 and powerpc. [BZ #16347] [BZ #19046] * sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include <libc-internal.h>. (MAXLGM): Do not use diagnostic control macros. [LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow threshold for ldbl-128ibm. (__ieee754_lgammal_r): For large arguments, multiply by log - 1 instead of multiplying by log then subtracting. * math/auto-libm-test-in: Add more tests of lgamma. * math/auto-libm-test-out: Regenerated.
* Improve test coverage of real libm functions [a-e]*.Joseph Myers2015-09-301-0/+290
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves test coverage of the real libm functions [a-e]*, ensuring that special cases and ranges of input values of potential significance (such as close to overflow and underflow thresholds) are more systematically covered. This is a followup to <https://sourceware.org/ml/libc-alpha/2013-12/msg00757.html> which covered [a-c]* (however, I found more weaknesses in the coverage of those functions when preparing this patch, hence the additional tests being added for them here). Addition of a test for acosh (-qNaN) is temporarily deferred, to be included as part of a fix for bug 19032 which was discovered in the course of adding these tests (and which illustrates the use of testing -qNaN as well as +qNaN as input even to functions for which the sign of a NaN isn't meant to be significant). Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of acos, acosh, asin, atan, atan2, atanh, cbrt, cos, cosh, erf, erfc, exp, exp10, exp2 and expm1. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (acos_test_data): Add more tests. (asin_test_data): Likewise. (asinh_test_data): Likewise. (atan_test_data): Likewise. (atanh_test_data): Likewise. (atan2_test_data): Likewise. (cbrt_test_data): Likewise. (ceil_test_data): Likewise. (copysign_test_data): Likewise. (cos_test_data): Likewise. (cosh_test_data): Likewise. (erf_test_data): Likewise. (erfc_test_data): Likewise. (exp_test_data): Likewise. (exp10_test_data): Likewise. (exp2_test_data): Likewise. (expm1_test_data): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* Fix clog, clog10 inaccuracy (bug 19016).Joseph Myers2015-09-281-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids cancellation error and then using log1p. However, the thresholds for using that approach still result in log being used on argument as large as sqrt(13/16) > 0.9, leading to significant errors, in some cases above the 9ulp maximum allowed in glibc libm. This patch arranges for the approach using log1p to be used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the existing allowance for cases where one of X and Y is very small), adjusting the __x2y2m1 functions to work with the wider range of inputs. This way, log only gets used on arguments below sqrt(1/2) (or substantially above 1), where the error involved is much less. Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration I removed the existing clog and clog10 ulps before regenerating to allow any reduced ulps to appear. Tests added include those found by random test generation to produce large ulps either before or after the patch, and some found by trying inputs close to the (0.75, 0.5) threshold where the potential errors from using log are largest. [BZ #19016] * sysdeps/generic/math_private.h (__x2y2m1f): Update comment to allow more cases with X^2 + Y^2 >= 0.5. * sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment. * sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise. * sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0] (__x2y2m1): Update comment. * sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * math/s_clog.c (__clog): Handle more cases using log1p without hypot. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/auto-libm-test-in: Add more tests of clog and clog10. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix powf inaccuracy (bug 18956).Joseph Myers2015-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | The flt-32 version of powf can be inaccurate because of bugs in the extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part of calculating log(x) with extra precision: a constant used (as part of adding 1 or 1.5 through integer arithmetic) is incorrect, and then the code fails to mask a computed high part before using it in arithmetic that relies on s_h*t_h being exactly representable. This patch fixes these bugs. Tested for x86_64 and x86. x86_64 ulps for powf removed and regenerated to reflect reduced ulps from the increased accuracy for existing tests. [BZ #18956] * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000 not 0x0040000 for high bit of mantissa. Mask with 0xfffff000 when extracting high part. * math/auto-libm-test-in: Add another test of pow. * math/auto-libm-test-out: Regenerated. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* Fix pow missing underflows (bug 18825).Joseph Myers2015-09-251-0/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, pow functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes, thereby concluding the fixes for known bugs with missing underflow exceptions currently filed in Bugzilla. Tested for x86_64, x86, mips64 and powerpc. [BZ #18825] * sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN): New macro. (DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise. (LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise. * sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN. (__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of DBL_NARROW_EVAL, reloading the PIC register as needed. * sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN. (__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of FLT_NARROW_EVAL. Use separate return path for case when first argument is NaN. * sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the PIC register. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force underflow for subnormal result. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use math_check_force_underflow_nonneg. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use math_check_force_underflow. * sysdeps/x86_64/fpu/x86_64-math-asm.h (LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro. * sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated.
* Fix hypot missing underflows (bug 18803).Joseph Myers2015-09-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, hypot functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes. Note that this issue cannot arise for implementations of hypotf using double (or wider) for intermediate evaluation (if hypotf should underflow, that means the double square root is being computed of some number of the form N*2^-298, for 0 < N < 2^46, which is exactly represented as a double, and whatever the rounding mode such a square root cannot have a mantissa with all zeroes after the initial 23 bits). Thus no changes are made to hypotf implementations in this patch, only to hypot and hypotl. Tested for x86_64, x86, mips64 and powerpc. [BZ #18803] * sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN. (MO): New macro. (__ieee754_hypot) [PIC]: Load PIC register. (__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of DBL_NARROW_EVAL. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use math_check_force_underflow_nonneg in case where result might be tiny. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise. * math/auto-libm-test-in: Add more tests of hypot. * math/auto-libm-test-out: Regenerated.
* Fix tgamma missing underflows (bug 18951).Joseph Myers2015-09-171-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, tgamma functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down are zero. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #18951] * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force underflow exception for small results. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * math/auto-libm-test-in: Add more tests of tgamma. * math/auto-libm-test-out: Regenerated.
* Fix ctan, ctanh missing underflows (bug 18595).Joseph Myers2015-09-151-10/+16
| | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, ctan and ctanh can fail to raise the underflow exception for some cases of results that are tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64 and x86. [BZ #18595] * math/s_ctan.c (__ctan): Force underflow exception for results whose real or imaginary part has small absolute value. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * math/auto-libm-test-in: Do not allow missing underflow for ctan and ctanh. Add more tests of ctan and ctanh.
* Fix i386 exp10 missing underflows (bug 18966).Joseph Myers2015-09-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | On i386, the double version of exp10 can miss underflow exceptions if the result is in the subnormal range for double but the last 11 bits of the 64-bit extended-precision mantissa happen to be zero. This patch forces the exception in a similar way to previous fixes. As with the exp2 and exp fixes, the exp10f changes may in fact not be needed to ensure underflow exceptions, but are included for consistency and to fix the exp10 part of bug 18875 by ensuring that excess range and precision is removed from underflowing return values. Tested for x86_64 and x86. [BZ #18875] [BZ #18966] * sysdeps/i386/fpu/e_exp10.S (dbl_min): New object. (MO): New macro. (__ieee754_exp10): For small results, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_exp10f.S (flt_min): New object. (MO): New macro. (__ieee754_exp10f): For small results, force underflow exception and remove excess range and precision from return value. * math/auto-libm-test-in: Add more tests of exp10. * math/auto-libm-test-out: Regenerated.
* Fix i386 exp missing underflows (bug 18961).Joseph Myers2015-09-141-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | On i386, the double version of exp can miss underflow exceptions if the result is in the subnormal range for double but the last 11 bits of the 64-bit extended-precision mantissa happen to be zero. This patch forces the exception in a similar way to previous fixes. As with the exp2 fixes, the expf changes may in fact not be needed to ensure underflow exceptions, but are included for consistency and to fix the exp part of bug 18875 by ensuring that excess range and precision is removed from underflowing return values. Tested for x86_64 and x86. [BZ #18875] [BZ #18961] * sysdeps/i386/fpu/e_exp.S (dbl_min): New object. (MO): New macro. (__ieee754_exp): For small results, force underflow exception and remove excess range and precision from return value. (__exp_finite): Likewise. * sysdeps/i386/fpu/e_expf.S (flt_min): New object. (MO): New macro. (__ieee754_expf): For small results, force underflow exception and remove excess range and precision from return value. (__expf_finite): Likewise. * math/auto-libm-test-in: Add more tests of exp. * math/auto-libm-test-out: Regenerated.
* Fix exp2 missing underflows (bug 16521).Joseph Myers2015-09-141-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various exp2 implementations in glibc can miss underflow exceptions when the scaling down part of the calculation is exact (or, in the x86 case, when the conversion from extended precision to the target precision is exact). This patch forces the exception in a similar way to previous fixes. The x86 exp2f changes may in fact not be needed for this purpose - it's likely to be the case that no argument of type float has an exp2 result so close to an exact subnormal float value that it equals that value when rounded to 64 bits (even taking account of variation between different x86 implementations). However, they are included for consistency with the changes to exp2 and so as to fix the exp2f part of bug 18875 by ensuring that excess range and precision is removed from underflowing return values. Tested for x86_64, x86 and mips64. [BZ #16521] [BZ #18875] * math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for small results. * sysdeps/i386/fpu/e_exp2.S (dbl_min): New object. (MO): New macro. (__ieee754_exp2): For small results, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_exp2f.S (flt_min): New object. (MO): New macro. (__ieee754_exp2f): For small results, force underflow exception and remove excess range and precision from return value. * sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object. (MO): New macro. (__ieee754_exp2l): Force underflow exception for small results. * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise. * sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object. (MO): New macro. (__ieee754_exp2l): Force underflow exception for small results. * math/auto-libm-test-in: Add more tests or exp2. * math/auto-libm-test-out: Regenerated.
* Add more random libm test inputs (mainly for ldbl-128).Joseph Myers2015-09-121-0/+62
| | | | | | | | | | | | | | | | | | | | | This patch adds more libm test inputs found through random test generation to increase previously known ulps. This particular test generation was run for mips64, so most of the increased ulps are for ldbl-128 (float and double having been fairly well covered by such testing for x86_64), but there's the odd ulps increase for other formats. Tested for x86_64, x86 and mips64. * math/auto-libm-test-in: Add more tests of acos, acosh, asin, asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp, exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and tanh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix ldbl-128/ldbl-128ibm lgamma spurious "invalid", incorrect signgam (bug ↵Joseph Myers2015-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | 18952). The ldbl-128 / ldbl-128ibm implementation of lgammal converts (the floor of minus) non-integer negative arguments to int to determine the value of signgam. When those values are outside the range of int, this produces spurious "invalid" exceptions and incorrect values of signgam. This patch fixes this by instead determining signgam through comparing half the integer in question to floor of half the integer. Tested for mips64, x86_64 and x86. [BZ #18952] * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Do not convert non-integer negative arguments to int to determine the value of signgam. * math/auto-libm-test-in: Add more tests of lgamma. * math/auto-libm-test-out: Regenerated.
* Add more randomly-generated libm tests.Joseph Myers2015-09-111-0/+14
| | | | | | | | | | | | | This patch adds more libm test inputs found through random test generation to increase observed ulps on x86_64. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of acosh, atanh, cbrt, cosh, csqrt, erfc, expm1 and lgamma. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix lgamma (negative) inaccuracy (bug 2542, bug 2543, bug 2558).Joseph Myers2015-09-101-1/+436
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing implementations of lgamma functions (except for the ia64 versions) use the reflection formula for negative arguments. This suffers large inaccuracy from cancellation near zeros of lgamma (near where the gamma function is +/- 1). This patch fixes this inaccuracy. For arguments above -2, there are no zeros and no large cancellation, while for sufficiently large negative arguments the zeros are so close to integers that even for integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation is not significant. Thus, it is only necessary to take special care about cancellation for arguments around a limited number of zeros. Accordingly, this patch uses precomputed tables of relevant zeros, expressed as the sum of two floating-point values. The log of the ratio of two sines can be computed accurately using log1p in cases where log would lose accuracy. The log of the ratio of two gamma(1-x) values can be computed using Stirling's approximation (the difference between two values of that approximation to lgamma being computable without computing the two values and then subtracting), with appropriate adjustments (which don't reduce accuracy too much) in cases where 1-x is too small to use Stirling's approximation directly. In the interval from -3 to -2, using the ratios of sines and of gamma(1-x) can still produce too much cancellation between those two parts of the computation (and that interval is also the worst interval for computing the ratio between gamma(1-x) values, which computation becomes more accurate, while being less critical for the final result, for larger 1-x). Because this can result in errors slightly above those accepted in glibc, this interval is instead dealt with by polynomial approximations. Separate polynomial approximations to (|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8 from -3 to -2, where n (-3 or -2) is the nearest integer to the 1/8-interval and x0 is the zero of lgamma in the relevant half-integer interval (-3 to -2.5 or -2.5 to -2). Together, the two approaches are intended to give sufficient accuracy for all negative arguments in the problem range. Outside that range, the previous implementation continues to be used. Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm with large negative arguments giving spurious "invalid" exceptions (exposed by newly added tests for cases this patch doesn't affect the logic for); I'll address those problems separately. [BZ #2542] [BZ #2543] [BZ #2558] * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call __lgamma_neg for arguments from -28.0 to -2.0. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call __lgamma_negf for arguments from -15.0 to -2.0. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r): Call __lgamma_negl for arguments from -33.0 to -2.0. * sysdeps/ieee754/dbl-64/lgamma_neg.c: New file. * sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise. * sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise. * sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise. * sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise. * sysdeps/generic/math_private.h (__lgamma_negf): New prototype. (__lgamma_neg): Likewise. (__lgamma_negl): Likewise. (__lgamma_product): Likewise. (__lgamma_productl): Likewise. * math/Makefile (libm-calls): Add lgamma_neg and lgamma_product. * math/auto-libm-test-in: Add more tests of lgamma. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix csqrt missing underflows (bug 18370).Joseph Myers2015-08-191-0/+5
| | | | | | | | | | | | | | | | | | | The csqrt implementations in glibc can miss underflow exceptions when the real or imaginary part of the result becomes tiny in the course of scaling down (in particular, multiplication by 0.5) and that scaling is exact although the relevant part of the mathematical result isn't. This patch forces the exception in a similar way to previous fixes. Tested for x86_64 and x86. [BZ #18370] * math/s_csqrt.c (__csqrt): Force underflow exception for results whose real or imaginary part has small absolute value. * math/s_csqrtf.c (__csqrtf): Likewise. * math/s_csqrtl.c (__csqrtl): Likewise. * math/auto-libm-test-in: Add more tests of csqrt. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix csqrt spurious underflows (bug 18823).Joseph Myers2015-08-171-0/+9
| | | | | | | | | | | | | | | | | | The csqrt functions scale up small arguments to avoid underflows when calling hypot functions. However, even when hypot does not underflow, a subsequent calculation of 0.5 * hypot can underflow. This patch duly increases the threshold and scale factor to avoid such underflows as well. Tested for x86_64, x86 and mips64. [BZ #18823] * math/s_csqrt.c (__csqrt): Increase threshold and scale factor for scaling up small arguments. * math/s_csqrtf.c (__csqrtf): Likewise. * math/s_csqrtl.c (__csqrtl): Likewise. * math/auto-libm-test-in: Add more tests of csqrt. * math/auto-libm-test-out: Regenerated.
* Fix fma spurious underflows (bug 18824).Joseph Myers2015-08-141-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various fma implementations have logic that, when computing fma (x, y, z) where z is large (so care needs taking to avoid internal overflow) but x * y is small, scale x * y up instead of down to avoid internal underflows resulting from scaling down. (In these cases, x * y is small enough that only its sign actually matters rather than the exact value.) The threshold for scaling up instead of down was correct for "if the unscaled values were multiplied, the low part of the multiplication could underflow", and the scaling was sufficient to ensure that the low part of the multiplication did not underflow (given that cases of very small x * y - less than half the least subnormal - were previously dealt with). However, the choice in the functions wasn't between scaling up or no scaling, but between scaling up and scaling down (scaling down actually being needed when x * y isn't so small compared to z and so the exact value does matter). Thus a larger threshold is needed to ensure that scaling down doesn't produce values the multiplication of whose low parts underflows. This patch increases the thresholds accordingly. Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c removed so that the ldbl-128 version gets tested instead of the soft-fp one). [BZ #18824] * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for scaling x * y up instead of down. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise. * math/auto-libm-test-in: Add more tests of fma. * math/auto-libm-test-out: Regenerated.
* Add more random libm-test inputs.Joseph Myers2015-08-131-0/+45
| | | | | | | | | | | | | | | | This patch adds more test inputs to various libm functions found through random generation to have larger ulps errors than previously listed in libm-test-ulp, on at least one of x86_64 and x86. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of acos, acosh, asin, asinh, atan, atan2, atanh, cabs, cbrt, cosh, csqrt, erf, erfc, exp, exp2, lgamma, log, log1p, log2, pow, sin, sincos, tan, tanh and tgamma. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix tanh missing underflows (bug 16520).Joseph Myers2015-08-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some tanh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16520] * sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>. (__tanh): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>. (__tanhf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>. (__tanhl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of tanh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Add more tests of various libm functions.Joseph Myers2015-08-111-0/+42
| | | | | | | | | | | | | | This patch adds more tests of various libm functions found through random test generation to give increased ulps on 32-bit x86. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of acosh, asin, asinh, atanh, cabs, carg, cbrt, cosh, csqrt, erf, erfc, exp, exp10, expm1, hypot, log, log10, log1p, log2, pow, sinh, tan and tgamma. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix ldbl-128ibm tanhl inaccuracy (bug 18790).Joseph Myers2015-08-101-0/+36
| | | | | | | | | | | | | | | | ldbl-128ibm tanhl uses a too-small threshold to decide when to return +/-1, resulting in large errors. This patch changes it to a more appropriate threshold (the requirement is for 2*exp(-2|x|) to be small in terms of ulps of 1). Tested for x86_64, x86 and powerpc. [BZ #18790] * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Increase threshold for returning +/- 1. * math/auto-libm-test-in: Add more tests of tanh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix ldbl-128ibm sinhl inaccuracy near 0 (bug 18789).Joseph Myers2015-08-101-0/+22
| | | | | | | | | | | | | | | ldbl-128ibm sinhl uses a too-big threshold to decide when to return the argument, resulting in large errors. This patch fixes it to use a more appropriate threshold. Tested for x86_64, x86 and powerpc. [BZ #18789] * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Use smaller threshold for returning the argument. * math/auto-libm-test-in: Add more tests of sinh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix tan missing underflows (bug 16517).Joseph Myers2015-08-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some tan implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16517] * sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>. (tan): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>. (__kernel_tanf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>. (__kernel_tanl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of tan. * math/auto-libm-test-out: Regenerated.
* Fix sinh missing underflows (bug 16519).Joseph Myers2015-08-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some sinh implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16519] * sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>. (__ieee754_sinh): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>. (__ieee754_sinhf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>. (__ieee754_sinhl): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of sinh. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix powf (close to -1, large) (bug 18647).Joseph Myers2015-08-051-0/+40
| | | | | | | | | | | | | | | | The flt-32 implementation of powf wrongly uses x-1 instead of |x|-1 when computing log (x) for the case where |x| is close to 1 and y is large. This patch fixes the logic accordingly. Relevant tests existed for x close to 1, and corresponding tests are added for x close to -1, as well as for some new variant cases. Tested for x86_64 and x86. [BZ #18647] * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): For large y and |x| close to 1, use absolute value of x when computing log. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated.
* Improve tgamma accuracy (bug 18613).Joseph Myers2015-06-291-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In non-default rounding modes, tgamma can be slightly less accurate than permitted by glibc's accuracy goals. Part of the problem is error accumulation, addressed in this patch by setting round-to-nearest for internal computations. However, there was also a bug in the code dealing with computing pow (x + n, x + n) where x + n is not exactly representable, providing another source of error even in round-to-nearest mode; it was necessary to address both bugs to get errors for all testcases within glibc's accuracy goals. Given this second fix, accuracy in round-to-nearest mode is also improved (hence regeneration of ulps for tgamma should be from scratch - truncate libm-test-ulps or at least remove existing tgamma entries - so that the expected ulps can be reduced). Some additional complications also arose. Certain tgamma tests should strictly, according to IEEE semantics, overflow or not depending on the rounding mode; this is beyond the scope of glibc's accuracy goals for any function without exactly-determined results, but gen-auto-libm-tests doesn't handle being lax there as it does for underflow. (libm-test.inc also doesn't handle being lax about whether the result in cases very close to the overflow threshold is infinity or a finite value close to overflow, but that doesn't cause problems in this case though I've seen it cause problems with random test generation for some functions.) Thus, spurious-overflow markings, with a comment, are added to auto-libm-test-in (no bug in Bugzilla because the issue is with the testsuite, not a user-visible bug in glibc). And on x86, after the patch I saw ERANGE issues as previously reported by Carlos (see my commentary in <https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which needed addressing by ensuring excess range and precision were eliminated at various points if FLT_EVAL_METHOD != 0. I also noticed and fixed a cosmetic issue where 1.0f was used in long double functions and should have been 1.0L. This completes the move of all functions to testing in all rounding modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to remove the workaround for some functions not using ALL_RM_TEST. Tested for x86_64, x86, mips64 and powerpc. [BZ #18613] * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gamma_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammaf_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log of X_ADJ not X when adjusting exponent. (__ieee754_gammal_r): Do intermediate computations in round-to-nearest then adjust overflowing and underflowing results as needed. Use 1.0L not 1.0f as numerator of division. * math/libm-test.inc (tgamma_test_data): Remove one test. Moved to auto-libm-test-in. (tgamma_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Add one test of tgamma. Mark some other tests of tgamma with spurious-overflow. * math/auto-libm-test-out: Regenerated. * math/gen-libm-have-vector-test.sh: Do not check for START. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix ldbl-128 j1l spurious underflows (bug 18612).Joseph Myers2015-06-291-0/+3
| | | | | | | | | | | | | | | | | The ldbl-128 implementation of j1l produces spurious underflow exceptions for some small arguments, as a result of squaring the argument. This patch fixes it just to use a linear approximation for sufficiently small arguments, and then to force an underflow exception only in the cases where it is required. Tested for mips64. [BZ #18612] * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): For small arguments, just return 0.5 times the argument, with underflow forced as needed. * math/auto-libm-test-in: Add more tests of j1. * math/auto-libm-test-out: Regenerated.
* Fix j1, jn missing underflows (bug 16559).Joseph Myers2015-06-291-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, j1 and jn implementations can fail to raise the underflow exception when the internal computation is exact although the actual function is inexact. This patch forces the exception in a similar way to other such fixes. (The ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't need a change for this until spurious underflows in it are fixed.) Tested for x86_64, x86, mips64 and powerpc. [BZ #16559] * sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>. (__ieee754_j1): Force underflow exception for small results. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>. (__ieee754_j1f): Force underflow exception for small results. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>. (__ieee754_j1l): Force underflow exception for small results. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Add more tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
* Fix cexp, ccos, ccosh, csin, csinh spurious underflows (bug 18594).Joseph Myers2015-06-241-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cexp, ccos, ccosh, csin and csinh have spurious underflows in cases where they compute sin of the smallest normal, that produces an underflow exception (depending on which sin implementation is in use) but the final result does not underflow. ctan and ctanh may also have such underflows, or they may be latent (the issue there is that e.g. ctan (DBL_MIN) should, rounded upwards, be the next double value above DBL_MIN, which under glibc's accuracy goals may not have an underflow exception, but the intermediate computation of sin (DBL_MIN) would legitimately underflow on before-rounding architectures). This patch fixes all those functions so they use plain comparisons (> DBL_MIN etc.) instead of comparing the result of fpclassify with FP_SUBNORMAL (in all these cases, we already know the number being compared is finite). Note that in the case of csin / csinf / csinl, there is no need for fabs calls in the comparison because the real part has already been reduced to its absolute value. As the patch fixes the failures that previously obstructed moving tests of cexp to use ALL_RM_TEST, those tests are moved to ALL_RM_TEST by the patch (two functions remain yet to be converted). Tested for x86_64 and x86 and ulps updated accordingly. [BZ #18594] * math/s_ccosh.c (__ccosh): Compare with least normal value instead of comparing class with FP_SUBNORMAL. * math/s_ccoshf.c (__ccoshf): Likewise. * math/s_ccoshl.c (__ccoshl): Likewise. * math/s_cexp.c (__cexp): Likewise. * math/s_cexpf.c (__cexpf): Likewise. * math/s_cexpl.c (__cexpl): Likewise. * math/s_csin.c (__csin): Likewise. * math/s_csinf.c (__csinf): Likewise. * math/s_csinh.c (__csinh): Likewise. * math/s_csinhf.c (__csinhf): Likewise. * math/s_csinhl.c (__csinhl): Likewise. * math/s_csinl.c (__csinl): Likewise. * math/s_ctan.c (__ctan): Likewise. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * math/auto-libm-test-in: Add more tests of ccos, ccosh, cexp, csin, csinh, ctan and ctanh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (cexp_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Move csin, csinh tests to auto-libm-test-in.Joseph Myers2015-06-241-0/+50
| | | | | | | | | | | | | | | | | | This patch moves most tests of csin and csinh with finite inputs from libm-test.inc to auto-libm-test-in. The remaining two tests of each function with small arguments are not moved because moving them causes the time required by gen-auto-libm-tests to go up from under 8 seconds to over 11 minutes for me. (The current development version of MPC has had speed improvements for mpc_sin for some time, but there hasn't been a release containing those improvements yet.) Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of csin and csinh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (csin_test_data): Remove tests moved to auto-libm-test-in. (csinh_test_data): Likewise.
* Fix csin, csinh overflow in directed rounding modes (bug 18593).Joseph Myers2015-06-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | csin and csinh can produce bad results when overflowing in directed rounding modes, because a multiplication that can overflow is followed by a possible negation. This patch fixes this by negating one of the arguments of the multiplication before the multiplication instead of negating the result. The new tests for this issue are added to auto-libm-test-in, starting use of that file for csin and csinh. The issue was found in the course of moving existing tests for csin and csinh (existing tests, by being enabled in more cases than previously, showed the issue for float and double but not for long double); that move will now be done separately. Tested for x86_64 and x86 and ulps updated accordingly. [BZ #18593] * math/s_csin.c (__csin): Negate before rather than after possibly overflowing multiplication. * math/s_csinf.c (__csinf): Likewise. * math/s_csinh.c (__csinh): Likewise. * math/s_csinhf.c (__csinhf): Likewise. * math/s_csinhl.c (__csinhl): Likewise. * math/s_csinl.c (__csinl): Likewise. * math/auto-libm-test-in: Add some tests of csin and csinh. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (csin_test_data): Use AUTO_TESTS_c_c. (csinh_test_data): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
* Fix sin, sincos missing underflows (bug 16526, bug 16538).Joseph Myers2015-06-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some sin and sincos implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. Tested for x86_64, x86, mips64 and powerpc. [BZ #16526] [BZ #16538] * sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>. (__sin): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>. (__kernel_sinf): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>. (__kernel_sincosl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>. (__kernel_sincosl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>. (__kernel_sinl): Force underflow exception for arguments with small absolute value. * sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>. (__kernel_sinf): Force underflow exception for arguments with small absolute value. * math/auto-libm-test-in: Add more tests of sin and sincos. * math/auto-libm-test-out: Regenerated.
* Fix csqrt spurious underflows (bug 18371).Joseph Myers2015-06-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | The csqrt implementations in glibc can cause spurious underflows in some cases as a side-effect of the scaling for large arguments (when underflow is correct for the square root of the argument that was scaled down to avoid overflow, but not for the original argument). This patch arranges to avoid the underflowing intermediate computation (eliminating a multiplication in 0.5 in the problem cases where a subsequent scaling by 2 would follow). Tested for x86_64 and x86 and ulps updated accordingly (only needed for x86). [BZ #18371] * math/s_csqrt.c (__csqrt): Avoid multiplication by 0.5 where intermediate but not final result might underflow. * math/s_csqrtf.c (__csqrtf): Likewise. * math/s_csqrtl.c (__csqrtl): Likewise. * math/auto-libm-test-in: Add more tests of csqrt. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update.
* Fix exp2, exp2f spurious underflows (bug 18219).Joseph Myers2015-06-231-0/+7
| | | | | | | | | | | | | | | | | | | | | The dbl-64 and flt-32 implementations of exp2 functions produce spurious underflow exceptions. The underlying reason is the same in both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably chosen a and b, where a has small magnitude so 2^a - 1 can be computed with a low-degree polynomial approximation, and (2^a - 1)*2^b can underflow even when the final result does not. This patch fixes this by adjusting the threshold for when scaling is used to avoid intermediate underflow so it works for any possible value of a where the final result would not underflow. Tested for x86_64 and x86. [BZ #18219] * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce threshold on absolute value of exponent for which scaling is used. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise. * math/auto-libm-test-in: Add more tests of exp2. * math/auto-libm-test-out: Regenerated.
* Fix expm1 missing underflows (bug 16353).Joseph Myers2015-06-221-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to various other bugs in this area, some expm1 implementations do not raise the underflow exception for subnormal arguments, when the result is tiny and inexact. This patch forces the exception in a similar way to previous fixes. (The issue does not apply to the ldbl-* implementations or to those for x86 / x86_64 long double. The change to sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when previously fixing bug 16354; the bug in that implementation was previously latent, but the expm1 fixes stopped it being latent and so required it to be fixed to avoid spurious underflows from cosh.) Tested for x86_64 and x86. [BZ #16353] * sysdeps/i386/fpu/s_expm1.S (dbl_min): New object. (__expm1): Force underflow exception for arguments with small absolute value. * sysdeps/i386/fpu/s_expm1f.S (flt_min): New object. (__expm1f): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>. (__expm1): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>. (__expm1f): Force underflow exception for arguments with small absolute value. * sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh): Check for small arguments before calling __expm1. * math/auto-libm-test-in: Do not mark underflow exceptions as possibly missing for bug 16353. * math/auto-libm-test-out: Regenerated.
* Fix x86_64 / x86 expm1l (-min_subnorm) result sign (bug 18569).Joseph Myers2015-06-211-0/+4
| | | | | | | | | | | | | | | | | | | | In the x86 / x86_64 implementations of expm1l, when expm1l's result should underflow to 0 (argument minus the least subnormal, in some rounding modes), it can be a zero of the wrong sign. This patch fixes this by returning the argument with underflow forced in that case (this is a 1ulp error relative to the correctly rounded result of -0, which is OK in terms of the documented accuracy goals, whereas a result with the wrong sign never is). Tested for x86_64 and x86. [BZ #18569] * sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Force underflow and return argument in case of subnormal argument. * sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Likewise. * math/auto-libm-test-in: Add more tests of expm1. * math/auto-libm-test-out: Regenerated.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-12-12 16:44:50 +0000