about summary refs log tree commit diff
path: root/manual
Commit message (Collapse)AuthorAgeFilesLines
* x86: Add bounds `x86_non_temporal_threshold`Noah Goldstein2022-07-181-1/+1
| | | | | | | | | | | | | | | | | The lower-bound (16448) and upper-bound (SIZE_MAX / 16) are assumed by memmove-vec-unaligned-erms. The lower-bound is needed because memmove-vec-unaligned-erms unrolls the loop aggressively in the L(large_memset_4x) case. The upper-bound is needed because memmove-vec-unaligned-erms right-shifts the value of `x86_non_temporal_threshold` by LOG_4X_MEMCPY_THRESH (4) which without a bound may overflow. The lack of lower-bound can be a correctness issue. The lack of upper-bound cannot. (cherry picked from commit b446822b6ae4e8149902a78cdd4a886634ad6321)
* x86: Check RTM_ALWAYS_ABORT for RTM [BZ #28033]H.J. Lu2022-02-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html * Intel TSX will be disabled by default. * The processor will force abort all Restricted Transactional Memory (RTM) transactions by default. * A new CPUID bit CPUID.07H.0H.EDX[11](RTM_ALWAYS_ABORT) will be enumerated, which is set to indicate to updated software that the loaded microcode is forcing RTM abort. * On processors that enumerate support for RTM, the CPUID enumeration bits for Intel TSX (CPUID.07H.0H.EBX[11] and CPUID.07H.0H.EBX[4]) continue to be set by default after microcode update. * Workloads that were benefited from Intel TSX might experience a change in performance. * System software may use a new bit in Model-Specific Register (MSR) 0x10F TSX_FORCE_ABORT[TSX_CPUID_CLEAR] functionality to clear the Hardware Lock Elision (HLE) and RTM bits to indicate to software that Intel TSX is disabled. 1. Add RTM_ALWAYS_ABORT to CPUID features. 2. Set RTM usable only if RTM_ALWAYS_ABORT isn't set. This skips the string/tst-memchr-rtm etc. testcases on the affected processors, which always fail after a microcde update. 3. Check RTM feature, instead of usability, against /proc/cpuinfo. This fixes BZ #28033. (cherry picked from commit ea8e465a6b8d0f26c72bcbe453a854de3abf68ec)
* tunables: Simplify TUNABLE_SET interfaceSiddhesh Poyarekar2021-02-101-9/+7
| | | | | | | | | | | | | | | | | The TUNABLE_SET interface took a primitive C type argument, which resulted in inconsistent type conversions internally due to incorrect dereferencing of types, especialy on 32-bit architectures. This change simplifies the TUNABLE setting logic along with the interfaces. Now all numeric tunable values are stored as signed numbers in tunable_num_t, which is intmax_t. All calls to set tunables cast the input value to its primitive type and then to tunable_num_t for storage. This relies on gcc-specific (although I suspect other compilers woul also do the same) unsigned to signed integer conversion semantics, i.e. the bit pattern is conserved. The reverse conversion is guaranteed by the standard. (cherry picked from commit 61117bfa1b08ca048e6512c0652c568300fedf6a)
* Update INSTALL with package versions that are known to workTulio Magno Quites Machado Filho2021-01-251-12/+12
| | | | | | | Most packages have been tested with their latest releases, except for Python, whose latest version is 3.9.1. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* manual: Correct argument order in mount examples [BZ #27207]John McCabe2021-01-221-2/+2
| | | | Reviewed-by: DJ Delorie <dj@redhat.com>
* <sys/platform/x86.h>: Remove the C preprocessor magicH.J. Lu2021-01-211-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In <sys/platform/x86.h>, define CPU features as enum instead of using the C preprocessor magic to make it easier to wrap this functionality in other languages. Move the C preprocessor magic to internal header for better GCC codegen when more than one features are checked in a single expression as in x86-64 dl-hwcaps-subdirs.c. 1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX. 2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h. 3. Remove struct cpu_features and __x86_get_cpu_features from <sys/platform/x86.h>. 4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it in libc. 5. Make __get_cpu_features() private to glibc. 6. Replace __x86_get_cpu_features(N) with __get_cpu_features(). 7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE. 8. Use a single enum index for each CPU feature detection. 9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf. 10. Return zero struct cpuid_feature for the older glibc binary with a smaller CPUID_INDEX_MAX [BZ #27104]. 11. Inside glibc, use the C preprocessor magic so that cpu_features data can be loaded just once leading to more compact code for glibc. 256 bits are used for each CPUID leaf. Some leaves only contain a few features. We can add exceptions to such leaves. But it will increase code sizes and it is harder to provide backward/forward compatibilities when new features are added to such leaves in the future. When new leaves are added, _rtld_global_ro offsets will change which leads to race condition during in-place updates. We may avoid in-place updates by 1. Rename the old glibc. 2. Install the new glibc. 3. Remove the old glibc. NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
* ld.so: Add --list-tunables to print tunable valuesH.J. Lu2021-01-151-0/+38
| | | | | | Pass --list-tunables to ld.so to print tunables with min and max values. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Sync FDL from https://www.gnu.org/licenses/fdl-1.3.texiPaul Eggert2021-01-021-3/+3
|
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-0248-48/+48
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* Introduce _FORTIFY_SOURCE=3Siddhesh Poyarekar2020-12-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new _FORTIFY_SOURCE level of 3 to enable additional fortifications that may have a noticeable performance impact, allowing more fortification coverage at the cost of some performance. With llvm 9.0 or later, this will replace the use of __builtin_object_size with __builtin_dynamic_object_size. __builtin_dynamic_object_size ----------------------------- __builtin_dynamic_object_size is an LLVM builtin that is similar to __builtin_object_size. In addition to what __builtin_object_size does, i.e. replace the builtin call with a constant object size, __builtin_dynamic_object_size will replace the call site with an expression that evaluates to the object size, thus expanding its applicability. In practice, __builtin_dynamic_object_size evaluates these expressions through malloc/calloc calls that it can associate with the object being evaluated. A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of __builtin_dynamic_object_size is able to emit __memcpy_chk with the allocation size expression passed into the function: void *copy_obj (const void *src, size_t alloc, size_t copysize) { void *obj = malloc (alloc); memcpy (obj, src, copysize); return obj; } Limitations ----------- If the object was allocated elsewhere that the compiler cannot see, or if it was allocated in the function with a function that the compiler does not recognize as an allocator then __builtin_dynamic_object_size also returns -1. Further, the expression used to compute object size may be non-trivial and may potentially incur a noticeable performance impact. These fortifications are hence enabled at a new _FORTIFY_SOURCE level to allow developers to make a choice on the tradeoff according to their environment.
* free: preserve errno [BZ#17924]Paul Eggert2020-12-291-0/+9
| | | | | | | | | | | In the next release of POSIX, free must preserve errno <https://www.austingroupbugs.net/view.php?id=385>. Modify __libc_free to save and restore errno, so that any internal munmap etc. syscalls do not disturb the caller's errno. Add a test malloc/tst-free-errno.c (almost all by Bruno Haible), and document that free preserves errno. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* <sys/platform/x86.h>: Add Intel LAM supportH.J. Lu2020-12-221-0/+3
| | | | | | | | Add Intel Linear Address Masking (LAM) support to <sys/platform/x86.h>. HAS_CPU_FEATURE (LAM) can be used to detect if LAM is enabled in CPU. LAM modifies the checking that is applied to 64-bit linear addresses, allowing software to use of the untranslated address bits for metadata.
* elf: Add a tunable to control use of tagged memoryRichard Earnshaw2020-12-211-0/+35
| | | | | | | | | | | Add a new glibc tunable: mem.tagging. This is a decimal constant in the range 0-255 but used as a bit-field. Bit 0 enables use of tagged memory in the malloc family of functions. Bit 1 enables precise faulting of tag failure on platforms where this can be controlled. Other bits are currently unused, but if set will cause memory tag checking for the current process to be enabled in the kernel.
* config: Allow memory tagging to be enabled when configuring glibcRichard Earnshaw2020-12-211-0/+13
| | | | | | | | This patch adds the configuration machinery to allow memory tagging to be enabled from the command line via the configure option --enable-memory-tagging. The current default is off, though in time we may change that once the API is more stable.
* ieee754: Remove unused __sin32 and __cos32Anssi Hannula2020-12-181-14/+0
| | | | | The __sin32 and __cos32 functions were only used in the now removed slow path of asin and acos.
* s390x: Require GCC 7.1 or later to build glibc.Stefan Liebler2020-12-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache commits, e.g.: 785969a047ad2f23f758901c6816422573544453 elf: Implement a string table for ldconfig, with tail merging If glibc is build with gcc 6.5.0: __builtin_add_overflow is used in <glibc>/elf/stringtable.c:stringtable_finalize() which leads to ldconfig failing with "String table is too large". This is also recognizable in following tests: FAIL: elf/tst-glibc-hwcaps-cache FAIL: elf/tst-glibc-hwcaps-prepend-cache FAIL: elf/tst-ldconfig-X FAIL: elf/tst-ldconfig-bad-aux-cache FAIL: elf/tst-ldconfig-ld_so_conf-update FAIL: elf/tst-stringtable See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small uint32_t values incorrectly detects overflow" (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
* manual: Clarify File Access Modes section and add O_PATHFlorian Weimer2020-12-031-28/+44
| | | | | | Kees Cook reported that the current text is misleading: <https://lore.kernel.org/lkml/202005150847.2B1ED8F81@keescook/>
* nptl: Return EINVAL for invalid clock for pthread_clockjoin_npAdhemerval Zanella2020-11-251-0/+2
| | | | | | | | | The align the GNU extension with the others one that accept specify which clock to wait for (such as pthread_mutex_clocklock). Check on x86_64-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Argument Syntax: Use "option", @option, and @command.Carlos O'Donell2020-10-301-6/+6
| | | | Suggested-by: David O'Brien <daobrien@redhat.com>
* Reword description of SXID_* tunable propertiesSiddhesh Poyarekar2020-10-221-5/+6
| | | | | | | | | | | | | The SXID_* tunable properties only influence processes that are AT_SECURE, so make that a bit more explicit in the documentation and comment. Revisiting the code after a few years I managed to confuse myself, so I imagine there could be others who may have incorrectly assumed like I did that the SXID_ERASE tunables are not inherited by children of non-AT_SECURE processes. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* Move vtimes to a compatibility symbolAdhemerval Zanella2020-10-191-61/+0
| | | | | | | | | | | | | | I couldn't pinpoint which standard has added it, but no other POSIX system supports it and/or no longer provide it. The 'struct vtimes' also has a lot of drawbacks due its limited internal type size. I couldn't also see find any project that actually uses this symbol, either in some dignostic way (such as sanitizer). So I think it should be safer to just move to compat symbol, instead of deprecated. The idea it to avoid new ports to export such broken interface (riscv32 for instance). Checked on x86_64-linux-gnu and i686-linux-gnu.
* manual: correct the spelling of "MALLOC_PERTURB_" [BZ #23015]Benno Schulenberg2020-10-131-1/+1
| | | | Reported-by: Martin Dorey <martin.dorey@hds.com>
* manual: replace an obsolete collation example with a valid oneBenno Schulenberg2020-10-131-3/+3
| | | | | | | | | | | | | In the Spanish language, the digraph "ll" has not been considered a separate letter since 1994: https://www.rae.es/consultas/exclusion-de-ch-y-ll-del-abecedario Since January 1998 (commit 49891c106244888123557fca7fddda4fa1f96b1d), glibc's locale data no longer specifies "ch" and "ll" as separate collation elements. So, it's better to not use "ll" in an example. Also, the Czech "ch" is a better example as it collates in a more surprising place.
* <sys/platform/x86.h>: Add FSRCS/FSRS/FZLRM supportH.J. Lu2020-10-091-0/+9
| | | | | Add Fast Short REP CMP and SCA (FSRCS), Fast Short REP STO (FSRS) and Fast Zero-Length REP MOV (FZLRM) support to <sys/platform/x86.h>.
* <sys/platform/x86.h>: Add Intel HRESET supportH.J. Lu2020-10-091-0/+3
| | | | Add Intel HRESET support to <sys/platform/x86.h>.
* <sys/platform/x86.h>: Add AVX-VNNI supportH.J. Lu2020-10-091-0/+3
| | | | Add AVX-VNNI support to <sys/platform/x86.h>.
* <sys/platform/x86.h>: Add AVX512_FP16 supportH.J. Lu2020-10-091-0/+3
| | | | Add AVX512_FP16 support to <sys/platform/x86.h>.
* <sys/platform/x86.h>: Add Intel UINTR supportH.J. Lu2020-10-091-0/+3
| | | | Add Intel UINTR support to <sys/platform/x86.h>.
* Linux: Require properly configured /dev/pts for PTYsFlorian Weimer2020-10-071-8/+3
| | | | | | | | | | | | | Current systems do not have BSD terminals, so the fallback code in posix_openpt/getpt does not do anything. Also remove the file system check for /dev/pts. Current systems always have a devpts file system mounted there if /dev/ptmx exists. grantpt is now essentially a no-op. It only verifies that the argument is a ptmx-descriptor. Therefore, this change indirectly addresses bug 24941. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* manual: Fix typoJonathan Wakely2020-10-051-1/+1
|
* Set tunable value as well as min/max valuesH.J. Lu2020-09-291-2/+22
| | | | | | | | Some tunable values and their minimum/maximum values must be determinted at run-time. Add TUNABLE_SET_WITH_BOUNDS and TUNABLE_SET_WITH_BOUNDS_FULL to update tunable value together with minimum and maximum values. __tunable_set_val is updated to set tunable value as well as min/max values.
* Reversing calculation of __x86_shared_non_temporal_thresholdPatrick McGehearty2020-09-281-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __x86_shared_non_temporal_threshold determines when memcpy on x86 uses non_temporal stores to avoid pushing other data out of the last level cache. This patch proposes to revert the calculation change made by H.J. Lu's patch of June 2, 2017. H.J. Lu's patch selected a threshold suitable for a single thread getting maximum performance. It was tuned using the single threaded large memcpy micro benchmark on an 8 core processor. The last change changes the threshold from using 3/4 of one thread's share of the cache to using 3/4 of the entire cache of a multi-threaded system before switching to non-temporal stores. Multi-threaded systems with more than a few threads are server-class and typically have many active threads. If one thread consumes 3/4 of the available cache for all threads, it will cause other active threads to have data removed from the cache. Two examples show the range of the effect. John McCalpin's widely parallel Stream benchmark, which runs in parallel and fetches data sequentially, saw a 20% slowdown with this patch on an internal system test of 128 threads. This regression was discovered when comparing OL8 performance to OL7. An example that compares normal stores to non-temporal stores may be found at https://vgatherps.github.io/2018-09-02-nontemporal/. A simple test shows performance loss of 400 to 500% due to a failure to use nontemporal stores. These performance losses are most likely to occur when the system load is heaviest and good performance is critical. The tunable x86_non_temporal_threshold can be used to override the default for the knowledgable user who really wants maximum cache allocation to a single thread in a multi-threaded system. The manual entry for the tunable has been expanded to provide more information about its purpose. modified: sysdeps/x86/cacheinfo.c modified: manual/tunables.texi
* <sys/platform/x86.h>: Add Intel Key Locker supportH.J. Lu2020-09-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | Add Intel Key Locker: https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html support to <sys/platform/x86.h>. Intel Key Locker has 1. KL: AES Key Locker instructions. 2. WIDE_KL: AES wide Key Locker instructions. 3. AESKLE: AES Key Locker instructions are enabled by OS. Applications should use if (CPU_FEATURE_USABLE (KL)) and if (CPU_FEATURE_USABLE (WIDE_KL)) to check if AES Key Locker instructions and AES wide Key Locker instructions are usable.
* x86: Install <sys/platform/x86.h> [BZ #26124]H.J. Lu2020-09-111-0/+517
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Install <sys/platform/x86.h> so that programmers can do #if __has_include(<sys/platform/x86.h>) #include <sys/platform/x86.h> #endif ... if (CPU_FEATURE_USABLE (SSE2)) ... if (CPU_FEATURE_USABLE (AVX2)) ... <sys/platform/x86.h> exports only: enum { COMMON_CPUID_INDEX_1 = 0, COMMON_CPUID_INDEX_7, COMMON_CPUID_INDEX_80000001, COMMON_CPUID_INDEX_D_ECX_1, COMMON_CPUID_INDEX_80000007, COMMON_CPUID_INDEX_80000008, COMMON_CPUID_INDEX_7_ECX_1, /* Keep the following line at the end. */ COMMON_CPUID_INDEX_MAX }; struct cpuid_features { struct cpuid_registers cpuid; struct cpuid_registers usable; }; struct cpu_features { struct cpu_features_basic basic; struct cpuid_features features[COMMON_CPUID_INDEX_MAX]; }; /* Get a pointer to the CPU features structure. */ extern const struct cpu_features *__x86_get_cpu_features (unsigned int max) __attribute__ ((const)); Since all feature checks are done through macros, programs compiled with a newer <sys/platform/x86.h> are compatible with the older glibc binaries as long as the layout of struct cpu_features is identical. The features array can be expanded with backward binary compatibility for both .o and .so files. When COMMON_CPUID_INDEX_MAX is increased to support new processor features, __x86_get_cpu_features in the older glibc binaries returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the new processor feature. No new symbol version is neeeded. Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE can be used to identify processor features. Note: Although GCC has __builtin_cpu_supports, it only supports a subset of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It doesn't support HAS_CPU_FEATURE.
* Add mallinfo2 function that support sizes >= 4GB.Martin Liska2020-08-311-18/+18
| | | | | The current int type can easily overflow for allocation of more than 4GB.
* manual: Fix sigdescr_np and sigabbrev_np return type (BZ #26343)Adhemerval Zanella2020-08-081-2/+2
|
* manual: Put the istrerrorname_np and strerrordesc_np return type in bracesAdhemerval Zanella2020-08-071-2/+2
| | | | Otherwise it is not rendered or indexed correctly.
* manual: Fix strerrorname_np and strerrordesc_np return type (BZ #26343)Adhemerval Zanella2020-08-071-2/+2
|
* manual: Fix some @code/@var formatting glitches chapter Date And TimeFlorian Weimer2020-08-051-10/+10
|
* manual: New signal and errno string functions are AS-safeFlorian Weimer2020-07-172-4/+4
| | | | | | | | The annotations for sigabbrev_np, sigdescr_np, strerrordesc_np, strerrorname_np are not preliminary. These functions were added precisely because they are AS-safe. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Linux: Remove rseq supportFlorian Weimer2020-07-161-64/+0
| | | | | | | | | | | | | | | | | | The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* manual: Use Unicode instead HTML entities for characters (bug 19737)Florian Weimer2020-07-161-3/+3
| | | | | | | | | | Texinfo no longer treats arguments to @set in @ifhtml blocks as literal HTML, so the & in the entity references was encoded as @amp; in HTML. Using the equivalent Unicode characters avoids this issue. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Remove --enable-obsolete-rpc configure flagPetr Vorel2020-07-131-3/+1
| | | | | | | | | | | | | | | | | | | | | | Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc, and Sun RPC headers. Also test for bug #20790 was removed (test for rpcgen). Backward compatibility for old programs is kept only for architectures and ABIs that have been added in or before version 2.28. libtirpc is mature enough, librpcsvc and rpcgen are provided in rpcsvc-proto project. NOTE: libnsl code depends on Sun RPC (installed libnsl headers use installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency for --enable-obsolete-nsl (removed in a previous commit). The arc ABI list file has to be updated because the port was added with the sunrpc symbols Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Documentation for ARC portVineet Gupta2020-07-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (a) ABI doc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf (b) Programmer's Reference Manual (PRM) : needs a download request to be filled https://www.synopsys.com/dw/ipdir.php?ds=arc-hs44-hs46-hs48 https://www.synopsys.com/dw/doc.php/ds/cc/programmers-reference-manual-ARC-HS.pdf As of port merge (and Florian's patch to fix static TLS), glibc testsuite (cross-test setup) has following failures: FAIL: elf/tst-audit14 FAIL: elf/tst-audit15 FAIL: elf/tst-audit16 FAIL: elf/tst-ldconfig-ld_so_conf-update FAIL: elf/tst-libc_dlvsym FAIL: elf/tst-libc_dlvsym-static FAIL: iconv/test-iconvconfig # Needs gconv installed FAIL: io/ftwtest # Requires execution by non-root FAIL: io/tst-lockf FAIL: libio/tst-wfile-sync FAIL: locale/tst-localedef-path-norm FAIL: nptl/test-cond-printers # needs Python3 and target GDB on target FAIL: nptl/test-condattr-printers # ditto FAIL: nptl/test-mutex-printers # ditto FAIL: nptl/test-mutexattr-printers # ditto FAIL: nptl/test-rwlock-printers # ditto FAIL: nptl/test-rwlockattr-printers # ditto FAIL: nptl/tst-umask1 # passes if run natively on target (NFS ACLv3 support needed) FAIL: nss/bug-erange FAIL: nss/tst-nss-files-hosts-getent FAIL: nss/tst-nss-files-hosts-multi FAIL: posix/bug-ga2 FAIL: posix/globtest # require same user on target and host FAIL: posix/tst-getaddrinfo5 FAIL: stdio-common/tst-vfprintf-width-prec FAIL: stdio-common/tst-vfprintf-width-prec-alloc FAIL: stdio-common/tst-vfprintf-width-prec-mem FAIL: string/tst-strerror FAIL: string/tst-strsignal FAIL: sunrpc/bug20790 # missing cpp on target FAIL: timezone/tst-tzset Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* rtld: Avoid using up static TLS surplus for optimizations [BZ #25051]Szabolcs Nagy2020-07-081-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On some targets static TLS surplus area can be used opportunistically for dynamically loaded modules such that the TLS access then becomes faster (TLSDESC and powerpc TLS optimization). However we don't want all surplus TLS to be used for this optimization because dynamically loaded modules with initial-exec model TLS can only use surplus TLS. The new contract for surplus static TLS use is: - libc.so can have up to 192 bytes of IE TLS, - other system libraries together can have up to 144 bytes of IE TLS. - Some "optional" static TLS is available for opportunistic use. The optional TLS is now tunable: rtld.optional_static_tls, so users can directly affect the allocated static TLS size. (Note that module unloading with dlclose does not reclaim static TLS. After the optional TLS runs out, TLS access is no longer optimized to use static TLS.) The default setting of rtld.optional_static_tls is 512 so the surplus TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before. Fixes BZ #25051. Tested on aarch64-linux-gnu and x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* rtld: Account static TLS surplus for audit modulesSzabolcs Nagy2020-07-081-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The new static TLS surplus size computation is surplus_tls = 192 * (nns-1) + 144 * nns + 512 where nns is controlled via the rtld.nns tunable. This commit accounts audit modules too so nns = rtld.nns + audit modules. rtld.nns should only include the namespaces required by the application, namespaces for audit modules are accounted on top of that so audit modules don't use up the static TLS that is reserved for the application. This allows loading many audit modules without tuning rtld.nns or using up static TLS, and it fixes FAIL: elf/tst-auditmany Note that DL_NNS is currently a hard upper limit for nns, and if rtld.nns + audit modules go over the limit that's a fatal error. By default rtld.nns is 4 which allows 12 audit modules. Counting the audit modules is based on existing audit string parsing code, we cannot use GLRO(dl_naudit) before the modules are actually loaded.
* rtld: Add rtld.nns tunable for the number of supported namespacesSzabolcs Nagy2020-07-081-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to support DL_NNS (== 16) number of dynamic link namespaces, if we assume 192 bytes of TLS are reserved for libc use and 144 bytes are reserved for other system libraries that use IE TLS. A new tunable is introduced to control the number of supported namespaces and to adjust the surplus static TLS size as follows: surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512 The default is rtld.nns == 4 and then the surplus TLS size is the same as before, so the behaviour is unchanged by default. If an application creates more namespaces than the rtld.nns setting allows, then it is not guaranteed to work, but the limit is not checked. So existing usage will continue to work, but in the future if an application creates more than 4 dynamic link namespaces then the tunable will need to be set. In this patch DL_NNS is a fixed value and provides a maximum to the rtld.nns setting. Static linking used fixed 2048 bytes surplus TLS, this is changed so the same contract is used as for dynamic linking. With static linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by default the surplus TLS is reduced to 144 + 512 = 656 bytes. This change is not expected to cause problems. Tested on aarch64-linux-gnu and x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Remove --enable-obsolete-nsl configure flagPetr Vorel2020-07-083-28/+13
| | | | | | | | | | | | | | | | | | | this means that *always* libnsl is only built as shared library for backward compatibility and the NSS modules libnss_nis and libnss_nisplus are not built at all, libnsl's headers aren't installed. This compatibility is kept only for architectures and ABIs that have been added in or before version 2.28. Replacement implementations based on TIRPC, which additionally support IPv6, are available from <https://github.com/thkukuk/>. This change does not affect libnss_compat which does not depended on libnsl since 2.27 and thus can be used without NIS. libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed libnsl headers use installed Sun RPC headers), which will be removed in the following commit.
* string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella2020-07-071-0/+23
| | | | | | | | | | | | | | | | | The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella2020-07-071-0/+24
| | | | | | | | | | | | | | | | | | The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-29 04:03:53 +0000