summary refs log tree commit diff
path: root/manual
Commit message (Collapse)AuthorAgeFilesLines
* Files open O_WRONLY not supported in fallocate emulation.Carlos O'Donell2015-09-291-0/+4
| | | | | | | | | | | | | | | | | In the posix_fallocate description in the manual we list various drawbacks with the emulation, including the fact that a file opened with O_APPEND fails with EBADF. Similarly a file opened with O_WRONLY fails with EBADF. We must be able to emulate a compare-and-swap via pread/compare/pwrite in order to make the emulation as safe as possible. It is not acceptable to ignore the read failure because it could result in significant data loss across all of the blocks. There is no other way to make this work without a true atomic CAS and SIGBUS handler (which is looking more attractive as a way to remove the race condition). This patch adds O_WRONLY to the manual as another bullet to clarify the limits of the emulation. Manual looks good in PDF.
* timezone: add a configure flag to disable program installMike Frysinger2015-09-181-0/+10
| | | | | | | | | Some distros build+install the timezone tools (zic/zdump/tzselect) outside of glibc and use the upstream package directly. Add a configure flag to glibc so they can disable install of those tools. This allows tests to run & pass regardless of the configure flag. Only the install of them is impacted.
* manual: skip build when perl is unavailableMike Frysinger2015-08-211-0/+3
| | | | | | | Do not try to generate the manual when perl is unavailable. This matches the behavior when makeinfo is unavailable. Otherwise the install step fails when trying to generate the libm section since it runs a perl script.
* Fix exponents in manual.Ondřej Bílka2015-08-204-23/+34
| | | | | | | * manual/macros.texi: Add twoexp macro. * manual/filesys.texi: Fix exponents. * manual/llio.texi: Likewise. * manual/stdio.texi: Likewise.
* PowerPC: Extend Program Priority Register supportGabriel F. T. Gomes2015-08-191-0/+18
| | | | | | | | | | | | This patch adds extra inline functions to change the Program Priority Register from ISA 2.07. 2015-08-19 Gabriel F. T. Gomes <gftg@linux.vnet.ibm.com> * sysdeps/powerpc/sys/platform/ppc.h (__ppc_set_ppr_med_high, __ppc_set_ppr_very_low): New functions. * manual/platform.texi: Add documentation about __ppc_set_ppr_med_high and __ppc_set_ppr_very_low.
* Attempting to install glibc configured with --prefix=/usr intoMartin Sebor2015-06-121-6/+8
| | | | | | | | a non-standard directory specified by the prefix make variable fails with an error. Since this is an unsupported use case, this change makes make install fail early and with a descriptive error message when either the prefix or the exec_prefix make variable is overridden on the command line.
* Start of series of patches with x86_64 vector math functions.Andrew Senkevich2015-06-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here is implementation of cos containing SSE, AVX, AVX2 and AVX512 versions according to Vector ABI which had been discussed in <https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>. Vector math library build and ABI testing enabled by default for x86_64. * sysdeps/x86_64/fpu/Makefile: New file. * sysdeps/x86_64/fpu/Versions: New file. * sysdeps/x86_64/fpu/svml_d_cos_data.S: New file. * sysdeps/x86_64/fpu/svml_d_cos_data.h: New file. * sysdeps/x86_64/fpu/svml_d_cos2_core.S: New file. * sysdeps/x86_64/fpu/svml_d_cos4_core.S: New file. * sysdeps/x86_64/fpu/svml_d_cos4_core_avx.S: New file. * sysdeps/x86_64/fpu/svml_d_cos8_core.S: New file. * sysdeps/x86_64/fpu/svml_d_wrapper_impl.h: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core.S: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core_sse4.S: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core.S: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core_avx2.S: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core.S: New file. * sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: New file. * sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added build of SSE, AVX2 and AVX512 IFUNC versions. * sysdeps/x86/fpu/bits/math-vector.h: Added SIMD declaration for cos. * math/bits/mathcalls.h: Added cos declaration with __MATHCALL_VEC. * sysdeps/x86_64/configure.ac: Options for libmvec build. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/sysdep.h (cfi_offset_rel_rsp): New macro. * sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New file. * manual/install.texi (Configuring and compiling): Document --disable-mathvec. * INSTALL: Regenerated. * NEWS: Mention addition of libmvec and x86_64 vector cos.
* posix_fallocate: Emulation fixes and documentation [BZ #15661]Florian Weimer2015-06-051-0/+94
| | | | | | | | Handle signed integer overflow correctly. Detect and reject O_APPEND. Document drawbacks of emulation. This does not completely address bug 15661, but improves the situation somewhat.
* Fix typo in safety annotations in envz_removeSiddhesh Poyarekar2015-05-201-1/+1
|
* Add envz_remove to the libc manualSiddhesh Poyarekar2015-05-191-0/+8
| | | | | | | | | | | | | | | | | | | | | I was told that Ma Shimao submitted a patch to add envz_remove to the libc manual, but the patch could not be accepted since he does not have a copyright assignment in place. I have been woefully behind on libc-alpha recently and have not seen the patch or the discussion thread. I have also not read the man page for envz_remove, so Alexandre Oliva asked me if I could write this independently and post a patch. The patch below is the result of the same - I have written it based on the implementation in string/envz.c and Alex told me via email that the function is AS, AC and MT-safe like envz_strip. I assume Alex and Carlos cannot review this since they have been tainted by the original patch (I haven't even tried to look for a link to it since I don't want to be tainted) so someone else will have to review this. If there are no reviewers till the end of the week, I will commit this since I believe there is a chance that there are no other reviewers who haven't read that thread. * manual/string.texi (Envz Functions): Add envz_remove.
* Avoid SIGFPE in wordexp [BZ #18100]Florian Weimer2015-03-231-1/+2
| | | | | Check for a zero divisor and integer overflow before performing division in arithmetic expansion.
* manual: fix XPG basename prototypeYaakov Selkowitz2015-03-121-1/+1
| | | | * manual/string.texi (XPG basename): Fix prototype.
* Document test-wrapper-env-only in INSTALL.Roland McGrath2015-03-061-8/+13
|
* manual: complete example in error message documentationRical Jasan2015-03-061-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | The manual gives "an example showing how to handle failure to open a file correctly." The example function, open_sesame, uses the newly-introduced strerror function and errno and program_invocation_short_name variables. It fails to specify GNU extensions, however, so attempts to use it in the following way: int main (void) {open_sesame ("badname");} fail during compilation with "error: ‘program_invocation_short_name’ undeclared", indicating the example is incomplete. The presence of "#include"s suggest everything neccesary for the function to work should be present. For completeness, the example is lacking the following line: #define _GNU_SOURCE as the declarations of program_invocation_*name in errno.h are wrapped in an "#ifdef __USE_GNU" conditional. The documentation of the variables is also expanded, adding that their definition lies in errno.h and noting specifically they are GNU extensions.
* manual: drop strerror C89 compatibility noteMike Frysinger2015-03-061-3/+0
| | | | | Mentioning systems that are old and don't support C89 is probably a waste of time nowadays. Drop the note.
* Refine documentation of libm exceptions goals.Joseph Myers2015-02-171-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refines the math.texi documentation of the goals for when libm function raise the inexact and underflow exceptions. The previous text was problematic in some cases around the underflow threshold. * Strictly, it would have meant that if the mathematical result of pow was very slightly below DBL_MIN, for example, it was required to raise the underflow exception; although normally a few ulps error would be OK, if that error meant the computed value was slightly above DBL_MIN it would fail the previously described underflow exception goal. * Similarly, strict IEEE semantics would imply that sin (DBL_MIN), in round-to-nearest mode, underflows on before-rounding but not after-rounding architectures, while returning DBL_MIN; the previous wording would have required an underflow exception, so preventing checks for a result with absolute value below DBL_MIN from being sufficient checks to determine whether the exception is required. (Under the previous wording, checks for a result with absolute value <= DBL_MIN wouldn't have been sufficient either, because in FE_TOWARDZERO mode a result of DBL_MIN definitely does not result from an underflowing infinite-precision result.) * The previous wording about rounding infinite-precision values could be taken to mean all exceptions including "inexact" must be consistent with some such value. That would mean that a result of DBL_MIN in FE_UPWARD mode with "inexact" raised must also have "underflow" raised on before-rounding architectures. Again, that would cause problems for computing a result (possibly with spurious "inexact" exceptions) and then using a rounding-mode-independent test for results with absolute value below DBL_MIN to determine whether an underflow exception must be forced in case the underflows from intermediate computations happened to be exact. By refining the documentation, this patch avoids stating goals for accuracy close to the underflow threshold that were stricter than applied anywhere else, and allows the implementation strategy of: compute a result within a few ulps, taking care to avoid underflows in intermediate computations, then force an underflow exception if that result was subnormal. Only fully-defined functions such as fma need to take greater care about the exact underflow threshold (including its dependence on whether the architecture is before-rounding or after-rounding, and on the rounding mode on after-rounding architectures). (If the rounding mode is changed as part of the computation, it's still necessary to ensure that not just intermediate computations, but the final computation of the result to be returned, do not raise underflow if that result is the least normal value and underflow would be inconsistent with the original rounding mode. Since such code can readily discard exceptions as part of saving and restoring the rounding mode - SET_RESTORE_ROUND_NOEX etc. - I don't think that should be a problem in practice.) * manual/math.texi (Errors in Math Functions): Clarify goals regarding inexact and underflow exceptions.
* * manual/time.texi (TZ Variable): glibc no longer comes with tzdata.Paul Eggert2015-02-161-1/+2
| | | | Problem reported by J William Piggott.
* [BZ #17969]J William Piggott2015-02-121-2/+2
| | | | | * manual/time.texi (TZ Variable): The zoneinfo path is /usr/share/zoneinfo.
* Document tv_sec is of type time_t:Rüdiger Sonderfeld2015-02-121-2/+2
| | | | | | The tv_sec is of type time_t in both struct timeval and struct timespec. This matches the implementation and also the relevant standard (checked C11 for timespec and opengroup for timeval).
* glibc 2.21 pre-release update.Carlos O'Donell2015-02-052-2/+12
| | | | | | | | | | | | Update all translations. Update contributions in the manual. Update installation notes with information about newest working tools. Reconfigure using exactly autoconf 2.69. Regenerate INSTALL.
* Update copyright dates not handled by scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've updated copyright dates in glibc for 2015. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Apart from the files updated last time (of which sotruss.ksh had moved to sotruss.sh during the year) this also updates nptl/version.c (missed from 2006 until October) and sysdeps/unix/sysv/linux/lddlibc4.c (missed since 2009). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-0247-47/+47
|
* Require bison 2.7 or newer for regenerating intl/plural.yWill Newton2014-12-221-0/+9
| | | | | | | | | | | | | | | | | | | The merge of the latest gettext code introduced changes to the yacc parser source that are incompatible with versions of bison older than 2.7. Add a configure check for the appropriate versions and document the requirement in INSTALL. ChangeLog: 2014-12-22 Will Newton <will.newton@linaro.org> * manual/install.texi: Document that we require bison 2.7 or above. * INSTALL: Regenerate. * configure.ac: Use AC_CHECK_PROG_VER instead of AC_PATH_PROG when checking for bison and check for version 2.7 or above. * configure: Regenerate.
* manual: Correct guarantee about pointers compared by qsort()Anders Kaseorg2014-12-211-6/+8
| | | | | | | C99, C11, POSIX, and the glibc implementation do guarantee that the pointers passed to the qsort comparison function lie within the array. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
* Bump required version of texinfo to 4.7Will Newton2014-12-151-1/+1
| | | | | | | | | | | | | | | It seems we require texinfo 4.7 for the --plaintext option, so document that and check for the correct version in configure. ChangeLog: 2014-12-15 Will Newton <will.newton@linaro.org> * manual/install.texi: Bump required version of texinfo to 4.7 from 4.5. * INSTALL: Regenerated. * configure.ac: Check for makeinfo version 4.7 and above. * configure: Regenerated.
* manual: Remove incorrect claim that qsort() can be stabilizedAnders Kaseorg2014-12-101-5/+4
| | | | | | | | | | | | Under certain conditions on the size of the array and its items, qsort() may fall back to an in-place quicksort if it cannot allocate memory for a temporary array with malloc(). This algorithm is not a stable sort even if the comparison function is written in the described manner. Fixes #10672. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
* Use -Werror by default, add --disable-werror.Joseph Myers2014-12-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As discussed starting at <https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this patch makes the glibc build use -Werror by default to avoid accidentally adding new warnings to the build. The configure option --disable-werror can be used to disable this. -Wno-error=undef is temporarily used because the build isn't clean regarding -Wundef warnings. The idea is that once the remaining -Wundef warnings have been cleaned up (in at least one configuration), -Wno-error=undef will be removed. I get a clean build and test on x86_64 (GCC 4.9 branch) with this patch. The expectation is that this may well break the build for some other configurations, and people seeing such breakage should make appropriate fixes to fix or suppress the warnings for their configurations. In some cases that may involve using pragmas as the right fix (I think that will be right for the -Wno-inline issue for MIPS I referred to in <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for example), in some cases -Wno-error in sysdeps makefiles (__restore_rt in MIPS sigaction, for example), in some cases substantive fixes for the warnings. Note that if, with a view to listing all the warnings then fixing them all, you just look for "warning:" in output from building and testing with --disable-werror, you'll see lots of warnings from the linker about functions such as tmpnam. Those warnings can be ignored - only compiler warnings are relevant to -Werror, not linker warnings. * configure.ac (--disable-werror): New configure option. (enable_werror): New AC_SUBST. * configure: Regenerated. * config.make.in (enable-werror): New variable. * Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror -Wno-error=undef. (+gccwarn-c): Do not use -Werror=implicit-function-declaration. * manual/install.texi (Configuring and compiling): Document --disable-werror. * INSTALL: Regenerated. * debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error. (CFLAGS-tst-chk2.c): Likewise. (CFLAGS-tst-chk3.c): Likewise. (CFLAGS-tst-chk4.cc): Likewise. (CFLAGS-tst-chk5.cc): Likewise. (CFLAGS-tst-chk6.cc): Likewise. (CFLAGS-tst-lfschk1.c): Likewise. (CFLAGS-tst-lfschk2.c): Likewise. (CFLAGS-tst-lfschk3.c): Likewise. (CFLAGS-tst-lfschk4.cc): Likewise. (CFLAGS-tst-lfschk5.cc): Likewise. (CFLAGS-tst-lfschk6.cc): Likewise.
* manual: fix addmntent's MT-Safety race annotationMa Shimiao2014-11-211-1/+1
| | | | | | | for ChangeLog * manual/sysinfo.texi (addmntent): It is actually MT-Safe, because the potential race is on the user-supplied stream.
* ctermid: return string literal, document MT-Safety pitfallAlexandre Oliva2014-11-211-3/+5
| | | | | | | | | | for ChangeLog * sysdeps/posix/ctermid.c (ctermid): Return a pointer to a string literal if not passed a buffer. * manual/job.texi (ctermid): Update reasoning, note deviation from posix, suggest mtasurace when not passed a buffer, for future non-preliminary safety notes.
* manual: cuserid is mtasurace if not passed a stringAlexandre Oliva2014-11-211-2/+3
| | | | | | | | for ChangeLog * manual/users.texi (cuserid): Fix MT-Safety note for the case of not passing it a buffer. Reported by Peng Haitao.
* Require check-safety.sh to pass; wish for check that all fns are documentedAlexandre Oliva2014-11-212-1/+6
| | | | | | | | | for ChangeLog * manual/Makefile ($(objpfx)stamp-summary): Require check-safety.sh to pass. * manual/check-safety.sh: Wish for verification that every @deftypefn and @deftypefun is followed by a @safety remark.
* Fix crossreference to nonexistent node BSD HandlerTom de Vries2014-11-181-1/+1
| | | | | | | 2014-11-18 Tom de Vries <tom@codesoucery.com> * manual/signal.texi (Primitives Interrupted by Signals): In section, replace BSD Handler xref with BSD Signal Handling.
* Remove sigvec.Roland McGrath2014-11-141-93/+4
|
* Require GCC 4.6 or later to build glibc.Joseph Myers2014-11-141-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | As discussed in the thread starting at <https://sourceware.org/ml/libc-alpha/2014-10/msg00792.html>, and continuing into November, this patch increases the minimum GCC version for building glibc to 4.6 (there seemed to be no clear consensus for 4.7). In particular, this allows us to use #pragma GCC diagnostic for fine-grained warning control with -Werror (subject to establishing a suitable policy for that use). The documentation has a statement, as requested, about the most recent GCC version tested for building glibc, and I've updated <https://sourceware.org/glibc/wiki/Release> to refer to updating that statement. A NEWS entry is added for this change, although previous such changes didn't get them. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by this patch). * configure.ac (libc_cv_compiler_ok): Require GCC 4.6 or later. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document a requirement of GCC 4.6 or later and that GCC 4.9 is the newest compiler verified to work. * INSTALL: Regenerated.
* Update minimal required bunutils version to 2.22Andrew Senkevich2014-11-101-1/+1
|
* manual/llio.texi: Comment on write atomicity.Carlos O'Donell2014-11-061-0/+5
| | | | | | | | | | We add Linux-realted comments about the atomicity of write with respect to file offsets. As of Linux 3.14 the file offset update is atomic. That means that multiple threads calling the write syscall can not possibly get the same file offset. Therefore the writes should not overlap and data should not be lost as is required by POSIX.
* Update autoconf version requirement in install.texi.Joseph Myers2014-10-311-1/+1
| | | | | | | | | | I noticed that install.texi was out of date with regard to the actual autoconf version requirement for regenerating configure scripts. This patch updates the documentation. * manual/install.texi (Tools for Compilation): Update autoconf version requirements. * INSTALL: Regenerated.
* manual/llio.texi: Add Linux-specific comments for write().Carlos O'Donell2014-10-291-0/+25
| | | | | | | | | | Add Linux-specific comments about the atomicity of write() and the POSIX requirements. 2014-10-29 Carlos O'Donell <carlos@redhat.com> * manual/llio.texi: Add comments discussing why write() may be considered MT-unsafe on Linux.
* Update contrib.texiAllan McRae2014-09-071-0/+6
| | | | Add entries for Wilco Dijkstra and Stefan Liebler.
* fcntl-linux.h: add new definitions and manual updates for open file ↵Jeff Layton2014-07-292-3/+315
| | | | | | | | description locks Open file description locks have been merged into the Linux kernel for v3.15. Add the appropriate command-value definitions and an update to the manual that describes their usage.
* manual: Update the locale documentationFlorian Weimer2014-07-101-32/+114
|
* Update miscellaneous files from upstream sources.Joseph Myers2014-06-261-35/+72
| | | | | | | | | | | | | | | | This patch updates miscellaneous files from their upstream sources: texinfo.tex from Texinfo, config.guess and config.sub from config.git, install-sh from automake and move-if-change from gnulib. Tested x86_64 that installed shared libraries are unchanged by the patch; also looked at the generated libc.pdf manual. * manual/texinfo.tex: Update to version 2014-05-05.10 with trailing whitespace removed. * scripts/config.guess: Update to version 2014-03-23. * scripts/config.sub: Update to version 2014-05-01 * scripts/install-sh: Update to version 2013-12-25.23. * scripts/move-if-change: Update from gnulib.
* Remove redundant C locale settings.Joseph Myers2014-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
* Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers2014-06-061-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
* Fix typo in manual.Ondřej Bílka2014-06-051-1/+1
|
* manual: Update prototypes for alphasort and friendsRasmus Villemoes2014-05-231-4/+4
| | | | | | | The four functions {alpha,version}sort{,64} take parameters of type const struct dirent{,64} **, not const void *. Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
* Increase minimum Linux kernel version to 2.6.32.Joseph Myers2014-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch increases the minimum Linux kernel version for glibc to 2.6.32, as discussed in the thread starting at <https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>. This patch just does the minimal change to arch_minimum_kernel settings (and LIBC_LINUX_VERSION, which determines the minimum kernel headers version, as it doesn't make sense for that to be older than the minimum kernel that can be used at runtime). Followups would be expected to do, roughly and not necessarily precisely in this order: * Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files where those checks are always true / always false for kernels 2.6.32 and above. * Otherwise simplify/improve conditionals in those files (for example, where defining once in the main file then undefining in architecture-specific files makes things clearer than having lots of separate definitions of the same macro), possibly fixing in the process cases where a macro should optimally have been defined for a given architecture but wasn't. (In the review in preparation for this version increase I checked what the right conditions should be for all macros in the main kernel-features.h whose definitions there would have been affected by the increase - but I only fixed that subset of the issues found where --enable-kernel=2.6.32 would have caused a kernel feature to be wrongly assumed to be present, not any cases where a feature is not assumed but could be assumed.) * Remove conditionals on __ASSUME_* where they can now be taken to be always-true, and the definitions when the macros are only used in Linux-specific files. * Split more architectures out of the main kernel-features.h (like ex-ports architectures), once various of the architecture conditionals there have been eliminated so the new architecture-specific files are no larger than actually necessary. Tested x86_64. 2014-03-27 Joseph Myers <joseph@codesourcery.com> [BZ #9894] * sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION): Change to 2.6.32. (arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32. * sysdeps/unix/sysv/linux/configure: Regenerated. * sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file. * sysdeps/unix/sysv/linux/microblaze/configure: Likewise. * sysdeps/unix/sysv/linux/tile/configure.ac: Likewise. * sysdeps/unix/sysv/linux/tile/configure: Likewise. * README: Update reference to required Linux kernel version. * manual/install.texi (Linux): Update reference to required Linux kernel headers version. * INSTALL: Regenerated.
* Fix types of stream hook functions in manual.Ondřej Bílka2014-04-281-4/+4
|
* manual: Sort overview listing by manual order.Carlos O'Donell2014-04-171-28/+77
| | | | | | | | | | | | | | | In the glibc manual we have a "Roadmap to the manual" section at the end of the "Introduction" chapter. The introductory text says "Here is an overview of the contents of the remaining chapters of this manual.", but then proceeds to list chapters out of order and some chapter are never referenced. This commit reorders the overview to correctly match the manual order. See: https://sourceware.org/ml/libc-alpha/2014-02/msg00823.html
* manual/setjmp.texi: Clarify setcontext and signal handlers textWill Newton2014-04-171-8/+11
| | | | | | | | | | | | | | | | | Calling setcontext from a signal handler can be done safely so it is sufficient to note that it is not recommended. Also mention in setcontext documentation that the behaviour of setcontext when restoring a context created by a call to a signal handler is unspecified. 2014-04-17 Will Newton <will.newton@linaro.org> * manual/setjmp.texi (System V contexts): Add note that calling setcontext on a context created by a call to a signal handler is undefined. Update text to note that setcontext from a signal handler is possible but not recommended.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 09:54:15 +0000