about summary refs log tree commit diff
path: root/manual
Commit message (Collapse)AuthorAgeFilesLines
* Mutex: Add pthread mutex tunablesKemi Wang2018-12-011-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does not have any functionality change, we only provide a spin count tunes for pthread adaptive spin mutex. The tunable glibc.pthread.mutex_spin_count tunes can be used by system administrator to squeeze system performance according to different hardware capabilities and workload characteristics. The maximum value of spin count is limited to 32767 to avoid the overflow of mutex->__data.__spins variable with the possible type of short in pthread_mutex_lock (). The default value of spin count is set to 100 with the reference to the previous number of times of spinning via trylock. This value would be architecture-specific and can be tuned with kinds of benchmarks to fit most cases in future. I would extend my appreciation sincerely to H.J.Lu for his help to refine this patch series. * manual/tunables.texi (POSIX Thread Tunables): New node. * nptl/Makefile (libpthread-routines): Add pthread_mutex_conf. * nptl/nptl-init.c: Include pthread_mutex_conf.h (__pthread_initialize_minimal_internal) [HAVE_TUNABLES]: Call __pthread_tunables_init. * nptl/pthreadP.h (MAX_ADAPTIVE_COUNT): Remove. (max_adaptive_count): Define. * nptl/pthread_mutex_conf.c: New file. * nptl/pthread_mutex_conf.h: New file. * sysdeps/generic/adaptive_spin_count.h: New file. * sysdeps/nptl/dl-tunables.list: New file. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Use max_adaptive_count () not MAX_ADAPTIVE_COUNT. * nptl/pthread_mutex_timedlock.c (__pthrad_mutex_timedlock): Likewise. Suggested-by: Andi Kleen <andi.kleen@intel.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Signed-off-by: Kemi.wang <kemi.wang@intel.com>
* malloc: tcache double free checkDJ Delorie2018-11-201-0/+12
| | | | | | | | | | | | | * malloc/malloc.c (tcache_entry): Add key field. (tcache_put): Set it. (tcache_get): Likewise. (_int_free): Check for double free in tcache. * malloc/tst-tcfree1.c: New. * malloc/tst-tcfree2.c: New. * malloc/Makefile: Run the new tests. * manual/probes.texi: Document memory_tcache_double_free probe. * dlfcn/dlerror.c (check_free): Prevent double frees.
* Use STRFMON_LDBL_IS_DBL instead of __ldbl_is_dbl.Zack Weinberg2018-11-161-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | On platforms where long double used to have the same format as double, but later switched to a different format (alpha, s390, sparc, and powerpc), accessing the older behavior is possible and it happens via __nldbl_* functions (not on the API, but accessible from header redirection and from compat symbols). These functions write to the global flag __ldbl_is_dbl, which tells other functions that long double variables should be handled as double. This patch takes the first step towards removing this global flag and creates __vstrfmon_l_internal, which takes an explicit flags parameter. This change arguably makes the generated code slightly worse on architectures where __ldbl_is_dbl is never true; right now, on those architectures, it's a compile-time constant; after this change, the compiler could theoretically prove that __vstrfmon_l_internal was never called with a nonzero flags argument, but it would probably need LTO to do it. This is not performance critical code and I tend to think that the maintainability benefits of removing action at a distance are worth it. However, we _could_ wrap the runtime flag check with a macro that was defined to ignore its argument and always return false on architectures where __ldbl_is_dbl is never true, if people think the codegen benefits are important. Tested for powerpc and powerpc64le.
* Fix typo in the documentation of gcvtGabriel F. T. Gomes2018-11-011-1/+1
| | | | | | | In the description of gcvt, add missing closing parenthesis in the comparison with sprintf. * manual/arith.texi (gcvt): Add missing closing parenthesis.
* hurd: Fix errno* generationSamuel Thibault2018-10-311-0/+13
| | | | | | | | * sysdeps/mach/hurd/errnos.awk: Avoid printing errnos.d. * sysdeps/gnu/errlist.c (EIEIO): Move text to... * manual/errno.texi (EIEIO): ... here. * sysdeps/gnu/errlist.c (EIEIO): Regenerate. * sysdeps/mach/hurd/bits/errno.h: Regenerate.
* Patch to require Python 3.4 or later to build glibc.Joseph Myers2018-10-292-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes Python 3.4 or later a required tool for building glibc, so allowing changes of awk, perl etc. code used in the build and test to Python code without any such changes needing makefile conditionals or to handle older Python versions. This patch makes the configure test for Python check the version and give an error if Python is missing or too old, and removes makefile conditionals that are no longer needed. It does not itself convert any code from another language to Python, and does not remove any compatibility with older Python versions from existing scripts. Tested for x86_64. * configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set critic_missing for versions before 3.4. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for Python to build glibc. * INSTALL: Regenerated. * Rules [PYTHON]: Make code unconditional. * benchtests/Makefile [PYTHON]: Likewise. * conform/Makefile [PYTHON]: Likewise. * manual/Makefile [PYTHON]: Likewise. * math/Makefile [PYTHON]: Likewise.
* Use gen-libm-test.py to generate ulps table for manual.Joseph Myers2018-10-243-213/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends gen-libm-test.py to generate the ulps table for the manual, so meaning there is only a single ulps file parser needed and another Perl script is eliminated. As with the introduction of gen-libm-test.py, this is designed to generate exactly the same libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still shorter in lines than the old gen-libm-test.pl even after this patch.) Note that this introduces a Python dependency for building the manual, which is thus noted in install.texi and NEWS. Tested building html / info / pdf versions of the manual. * math/gen-libm-test.py: Import os. (ALL_FLOATS_MANUAL): New constant. (ALL_FLOATS_SUFFIX): Likewise. (Ulps.all_functions): New function. (real_all_ulps): Likewise. (generate_err_table_sub): Likewise. (generate_err_table): Likewise. (main): Handle -s and -m options. * manual/libm-err-tab.pl: Remove. * manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py instead of libm-err-tab.pl. [$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no) != no]. * manual/install.texi (Tools for Compilation): Document requirement for Python to build manual. * INSTALL: Regenerated.
* [manual] Job control is no longer optional.Zack Weinberg2018-10-172-29/+11
| | | | | | | | | | | | | | | Job control was made mandatory in POSIX.1-2001: compare <http://pubs.opengroup.org/onlinepubs/7990989775/xsh/unistd.h.html> with <http://pubs.opengroup.org/onlinepubs/009695399/basedefs/unistd.h.html>. Seventeen years later, we need not devote an entire manual @node to warning people that this was once an optional POSIX feature. * manual/job.texi (Job Control is Optional): Remove node, as job control has not been optional in quite some time. (Job Control): Mention briefly that systems older than POSIX.1-2001 might not support job control. * manual/conf.texi (_POSIX_JOB_CONTROL): Will always be defined on systems conforming to POSIX.1-2001.
* Don't build libnsl for new ABIsAndreas Schwab2018-09-241-0/+3
| | | | | | For architectures and ABIs that are added in version 2.29 or later the option --enable-obsolete-nsl is no longer available, and no libnsl compatibility library is built.
* Add --with-nonshared-cflags option to configureFlorian Weimer2018-08-171-0/+14
|
* Update install.texi documentation of uses of Perl and Python.Joseph Myers2018-08-131-37/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The install.texi documentation of uses of Perl and Python is substantially out of date. The description of Perl is "to test the installation" (which I interpret as referring to test-installation.pl), but it's used for more tests than that, and to build the manual, and to regenerate one file in the source tree. The description of Python is only for pretty-printer tests, but it's used for other tests / benchmarks as well (and for other internal uses such as updating Unicode data, for which we already require Python 3, but I think install.texi only needs to describe uses from the main glibc Makefiles). This patch updates the descriptions of what those tools are used for. The Python information (and information about other tools for testing pretty printers) was awkwardly in the middle of the general description of building and testing glibc, rather than with the rest of information about tools used in glibc build and test; this patch moves the information about those tools into the main list. Tested with regeneration of INSTALL as well as "make info" and "make pdf". * manual/install.texi (Configuring and compiling): Do not list tools used for testing pretty printers here. (Tools for Compilation): List Python, PExpect and GDB here. Update descriptions of uses of Perl and Python. * INSTALL: Regenerate.
* Add convenience target 'install-locale-files'.Carlos O'Donell2018-08-021-7/+24
| | | | | | | | | The convenience install target 'install-locale-files' is created to allow distributions to install all of the SUPPORTED locales as files instead of into the locale-archive. You invoke the new convenience target like this: make localedata/install-locale-files DESTDIR=<prefix>
* Rename the glibc.tune namespace to glibc.cpuSiddhesh Poyarekar2018-08-022-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc.tune namespace is vaguely named since it is a 'tunable', so give it a more specific name that describes what it refers to. Rename the tunable namespace to 'cpu' to more accurately reflect what it encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since glibc.cpu.cpu is weird. * NEWS: Mention the change. * elf/dl-tunables.list: Rename tune namespace to cpu. * sysdeps/powerpc/dl-tunables.list: Likewise. * sysdeps/x86/dl-tunables.list: Likewise. * sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to cpu.name. * elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust. * elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise. * manual/README.tunables: Likewise. * manual/tunables.texi: Likewise. * sysdeps/powerpc/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86_64/Makefile: Likewise. * sysdeps/x86/dl-cet.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update tooling versions verified to work with glibc.Carlos O'Donell2018-07-311-10/+21
|
* Update contrib.texi contributions.Carlos O'Donell2018-07-311-12/+29
|
* Add manual documentation for threads.hRical Jasan2018-07-243-9/+554
| | | | | | | | | | | | This patch updates the manual and adds a new chapter to the manual, explaining types macros, constants and functions defined by ISO C11 threads.h standard. [BZ# 14092] * manual/debug.texi: Update adjacent chapter name. * manual/probes.texi: Likewise. * manual/threads.texi (ISO C Threads): New section. (POSIX Threads): Convert to a section.
* INSTALL: Add a note for Intel CET statusH.J. Lu2018-07-191-0/+5
| | | | | | * NEWS: Add a note for Intel CET status. * manual/install.texi: Likewise. * INSTALL: Regenerated.
* x86/CET: Document glibc.tune.x86_ibt and glibc.tune.x86_shstkH.J. Lu2018-07-181-0/+28
| | | | | * manual/tunables.texi: Document glibc.tune.x86_ibt and glibc.tune.x86_shstk.
* Intel CET: Document --enable-cetH.J. Lu2018-07-181-0/+11
| | | | | | * NEWS: Mention --enable-cet. * manual/install.texi: Document --enable-cet. * INSTALL: Regenerated.
* Add the statx functionFlorian Weimer2018-07-101-0/+1
|
* Add renameat2 function [BZ #17662]Florian Weimer2018-07-051-0/+1
| | | | | | | The implementation falls back to renameat if renameat2 is not available in the kernel (or in the kernel headers) and the flags argument is zero. Without kernel support, a non-zero argument returns EINVAL, not ENOSYS. This mirrors what the kernel does for invalid renameat2 flags.
* testrun.sh: Implement --tool=strace, --tool=valgrindFlorian Weimer2018-07-041-7/+1
| | | | | | | | $(file …) appears to be the only convenient way to create files with newlines and make substitution variables. This needs make 4.0 (released in 2013), so update the requirement to match. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Document interaction with GCC built-ins in the Customizing PrintfMartin Sebor2018-06-291-4/+12
| | | | section of the manual.
* New configure option --disable-crypt.Zack Weinberg2018-06-291-0/+11
| | | | | | | | Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
* manual: Revise crypt.texi.Zack Weinberg2018-06-2911-197/+351
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a major rewrite of the description of 'crypt', 'getentropy', and 'getrandom'. A few highlights of the content changes: - Throughout the manual, public headers, and user-visible messages, I replaced the term "password" with "passphrase", the term "password database" with "user database", and the term "encrypt(ion)" with "(one-way) hashing" whenever it was applied to passphrases. I didn't bother making this change in internal code or tests. The use of the term "password" in ruserpass.c survives, because that refers to a keyword in netrc files, but it is adjusted to make this clearer. There is a note in crypt.texi explaining that they were traditionally called passwords but single words are not good enough anymore, and a note in users.texi explaining that actual passphrase hashes are found in a "shadow" database nowadays. - There is a new short introduction to the "Cryptographic Functions" section, explaining how we do not intend to be a general-purpose cryptography library, and cautioning that there _are_, or have been, legal restrictions on the use of cryptography in many countries, without getting into any kind of detail that we can't promise to keep up to date. - I added more detail about what a "one-way function" is, and why they are used to obscure passphrases for storage. I removed the paragraph saying that systems not connected to a network need no user authentication, because that's a pretty rare situation nowadays. (It still says "sometimes it is necessary" to authenticate the user, though.) - I added documentation for all of the hash functions that glibc actually supports, but not for the additional hash functions supported by libxcrypt. If we're going to keep this manual section around after the transition is more advanced, it would probably make sense to add them then. - There is much more detailed discussion of how to generate a salt, and the failure behavior for crypt is documented. (Returning an invalid hash on failure is what libxcrypt does; Solar Designer's notes say that this was done "for compatibility with old programs that assume crypt can never fail".) - As far as I can tell, the header 'crypt.h' is entirely a GNU invention, and never existed on any other Unix lineage. The function 'crypt', however, was in Issue 1 of the SVID and is now in the XSI component of POSIX. I tried to make all of the @standards annotations consistent with this, but I'm not sure I got them perfectly right. - The genpass.c example has been improved to use getentropy instead of the current time to generate the salt, and to use a SHA-256 hash instead of MD5. It uses more random bytes than is strictly necessary because I didn't want to complicate the code with proper base64 encoding. - The testpass.c example has three hardwired hashes now, to demonstrate that different one-way functions produce different hashes for the same input. It also demonstrates how DES hashing only pays attention to the first eight characters of the input. - There is new text explaining in more detail how a CSPRNG differs from a regular random number generator, and how getentropy/getrandom are not exactly a CSPRNG. I tried not to make specific falsifiable claims here. I also tried to make the blocking/cancellation/error behavior of both getentropy and getrandom clearer.
* manual: Reorganize crypt.texi.Zack Weinberg2018-06-292-119/+73
| | | | | | | | | | | | | | | | | | In preparation for a major revision of the documentation for crypt(_r), getentropy, and getrandom, reorganize crypt.texi. This patch does not change any text; it only deletes and moves text. The description of 'getpass' moves to terminal.texi, since all it does is read a password from the controlling terminal with echo disabled. The "Legal Problems" section of crypt.texi is dropped, and the introductory text is shifted down to the "Encrypting Passwords" section; the next patch will add some new introductory text. Also, it is no longer true that crypt.texi's top @node needs to have no pointers. That was a vestige of crypt/ being an add-on. (makeinfo itself doesn't need @node pointers anymore, but the scripts that assemble the libc manual's topmost node rely on each chapter-level node having them.)
* Disallow use of DES encryption functions in new programs.Zack Weinberg2018-06-293-242/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt, ecb_crypt, and des_setparity should not be used in new programs, because they use the DES block cipher, which is unacceptably weak by modern standards. Demote all of them to compatibility symbols, and remove their prototypes from installed headers. cbc_crypt, ecb_crypt, and des_setparity were already compat symbols when glibc was configured with --disable-obsolete-rpc. POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT is defined, so this change also removes the definition of X_OPEN_CRYPT from <unistd.h>. The entire "DES Encryption" section is dropped from the manual, as is the mention of AUTH_DES and FIPS 140-2 in the introduction to crypt.texi. The documentation of 'memfrob' cross-referenced the DES Encryption section, which is replaced by a hyperlink to libgcrypt, and while I was in there I spruced up the actual documentation of 'memfrob' and 'strfry' a little. It's still fairly jokey, because those functions _are_ jokes, but they do also have real use cases, so people trying to use them for real should have all the information they need. DES-based authentication for Sun RPC is also insecure and should be deprecated or even removed, but maybe that can be left as TI-RPC's problem.
* Fix documentation build with old makeinfoSzabolcs Nagy2018-06-281-1/+1
| | | | | | With old makeinfo '@code {' fails because of the extra space. * manual/llio.texi: Remove spurious space.
* Remove macros extend_alloca, extend_alloca_account [BZ #18023]Florian Weimer2018-06-271-1/+0
| | | | | The unused macro definition in posix/glob.c comes from gnulib and will have to be removed there.
* Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)Adhemerval Zanella2018-06-261-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the OFD ("file private") locks for architectures that support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and F_{SET,GET}L{W}K64 expects a flock64 argument and when using old F_OFD_* flags with a non LFS flock argument the kernel might interpret the underlying data wrongly. Kernel idea originally was to avoid using such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS semantic as default it is possible to provide the functionality and avoid the bogus struct kernel passing by adjusting the struct manually for the required flags. The idea follows other LFS interfaces that provide two symbols: 1. A new LFS fcntl64 is added on default ABI with the usual macros to select it for FILE_OFFSET_BITS=64. 2. The Linux non-LFS fcntl use a stack allocated struct flock64 for F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided struct. 3. Keep a compat symbol with old broken semantic for architectures that do not define __OFF_T_MATCHES_OFF64_T. So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will aliased to fcntl and no adjustment would be required. So to actually use F_OFD_* with LFS support the source must be built with LFS support (_FILE_OFFSET_BITS=64). Also F_OFD_SETLKW command is handled a cancellation point, as for F_SETLKW{64}. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #20251] * NEWS: Mention fcntl64 addition. * csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel. * login/utmp_file.c: Likewise. * sysdeps/posix/fdopendir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/unix/pt-fcntl.c: Likewise. * include/fcntl.h (__libc_fcntl64, __fcntl64, __fcntl64_nocancel_adjusted): New prototype. (__fcntl_nocancel_adjusted): Remove prototype. * io/Makefile (routines): Add fcntl64. (CFLAGS-fcntl64.c): New rule. * io/Versions [GLIBC_2.28] (fcntl64): New symbol. [GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64. * io/fcntl.h (fcntl64): Add prototype and redirect if __USE_FILE_OFFSET64 is defined. * io/fcntl64.c: New file. * manual/llio.text: Add a note for which commands fcntl acts a cancellation point. * nptl/Makefile (CFLAGS-fcntl64.c): New rule. * sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols. * sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): New symbols. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64, F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for non-LFS case. * sysdeps/unix/sysv/linux/fcntl64.c: New file. * sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename to __fcntl64_nocancel. (__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted. * sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename to __fcntl64_nocancel. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks. (tests-internal): Add tst-ofdlocks-compat. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (fcntl64): New symbol. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* Run thread shutdown functions in an explicit orderFlorian Weimer2018-06-261-1/+1
| | | | | | | This removes the __libc_thread_subfreeres hook in favor of explict calls. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Add narrowing divide functions.Joseph Myers2018-05-171-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing divide functions from TS 18661-1 to glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64 for all configurations; f32divf64x, f32divf128, f64divf64x, f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt. The changes are mostly essentially the same as for the other narrowing functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add div. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing divide functions. * math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add div. * math/math-narrow.h (CHECK_NARROW_DIV): New macro. (NARROW_DIV_ROUND_TO_ODD): Likewise. (NARROW_DIV_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fdivl): New macro. (__ddivl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and ddiv. (CFLAGS-nldbl-ddiv.c): New variable. (CFLAGS-nldbl-fdiv.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_ddivl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl, ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx. * math/auto-libm-test-in: Add tests of div. * math/auto-libm-test-out-narrow-div: New generated file. * math/libm-test-narrow-div.inc: New file. * sysdeps/i386/fpu/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise. * sysdeps/ieee754/float128/s_f32divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* math: Merge strtod_nan_*.h into math-type-macros-*.hFlorian Weimer2018-05-161-1/+1
| | | | | This change will eventually make it possible to compile stdlib/strtod_nan_main.c as part of math/s_nan_template.c.
* Add narrowing multiply functions.Joseph Myers2018-05-161-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing multiply functions from TS 18661-1 to glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64 for all configurations; f32mulf64x, f32mulf128, f64mulf64x, f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations with _Float64x and _Float128; __nldbl_dmull for ldbl-opt. The changes are mostly essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. f32xmulf64 for i386 cannot use precision control as used for add and subtract, because that would result in double rounding for subnormal results, so that uses round-to-odd with long double intermediate result instead. The soft-fp support involves adding a new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs and outputs. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add mul. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing multiply functions. * math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add mul. * math/math-narrow.h (CHECK_NARROW_MUL): New macro. (NARROW_MUL_ROUND_TO_ODD): Likewise. (NARROW_MUL_TRIVIAL): Likewise. * soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fmull): New macro. (__dmull): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and dmul. (CFLAGS-nldbl-dmul.c): New variable. (CFLAGS-nldbl-fmul.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dmull. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull, dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx. * math/auto-libm-test-in: Add tests of mul. * math/auto-libm-test-out-narrow-mul: New generated file. * math/libm-test-narrow-mul.inc: New file. * sysdeps/i386/fpu/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmul.c: Likewise. * sysdeps/ieee754/float128/s_f32mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_dmull.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmull.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Revert:Alexandre Oliva2018-05-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | 2018-04-30 Raymond Nicholson <rain1@airmail.cc> * manual/startup.texi (Aborting a Program): Remove inappropriate joke. This complies with the decision of the project leader and primary and ultimate maintainer, who partially delegated maintainership to myself and others under certain constraints. This is also in line with the community-agreed procedures. It is obvious that we didn't have consensus on a decision to install that patch, since both sides are still arguing over it. As for the decision to reverse the deletion, if we even need one to counter a move that did not have consensus, although nobody else offered to install the reversal and restore the status prior to the fait accompli, and some explicitly refused to do so themselves, nobody objected when I offered to do so. Therefore, by the same reasoning that led to the mistaken installation of the patch, and after a much longer wait for objections, I understand there is consensus on my reverting it.
* manual/startup.texi (Aborting a Program): Remove inappropriate joke.Raymond Nicholson2018-04-301-8/+0
|
* Remove tilegx port.Joseph Myers2018-04-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since tile support has been removed from the Linux kernel for 4.17, this patch removes the (unmaintained) port to tilegx from glibc (the tilepro support having been previously removed). This reflects the general principle that a glibc port needs upstream support for the architecture in all the components it build-depends on (so binutils, GCC and the Linux kernel, for the normal case of a port supporting the Linux kernel but no other OS), in order to be maintainable. Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile, there are updates to various comments referencing tile for which removal of those references seemed appropriate. The configuration is removed from README and from build-many-glibcs.py. contrib.texi keeps mention of removed contributions, but I updated Chris Metcalf's entry to reflect that he also contributed the non-removed support for the generic Linux kernel syscall interface. __ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used by tile. * sysdeps/tile: Remove. * sysdeps/unix/sysv/linux/tile: Likewise. * README (tilegx-*-linux-gnu): Remove from list of supported configurations. * manual/contrib.texi (Contributors): Mention Chris Metcalf's contribution of support for generic Linux kernel syscall interface. * scripts/build-many-glibcs.py (Context.add_all_configs): Remove tilegx configurations. (Config.install_linux_headers): Do not handle tile. * sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile in comment. * sysdeps/unix/sysv/linux/nios2/Makefile: Likewise. * sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine. * sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile in comment. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine.
* Fix missing @ before texinfo commandAndreas Schwab2018-04-061-1/+1
|
* manual: Various fixes to the mbstouwcs example, and mbrtowc updateFlorian Weimer2018-04-052-43/+77
| | | | | | | | | | | | | | | | | | | | | | | The example did not work because the null byte was not converted, and mbrtowc was called with a zero-length input string. This results in a (size_t) -2 return value, so the function always returns NULL. The size computation for the heap allocation of the result was incorrect because it did not deal with integer overflow. Error checking was missing, and the allocated memory was not freed on error paths. All error returns now set errno. (Note that there is an assumption that free does not clobber errno.) The slightly unportable comparision against (size_t) -2 to catch both (size_t) -1 and (size_t) -2 return values is gone as well. A null wide character needs to be stored in the result explicitly, to terminate it. The description in the manual is updated to deal with these finer points. The (size_t) -2 behavior (consuming the input bytes) matches what is specified in ISO C11.
* manual: Move mbstouwcs to an example C fileFlorian Weimer2018-04-052-22/+29
|
* Update RWF_SUPPORTED for Linux kernel 4.16 [BZ #22947]H.J. Lu2018-04-031-0/+3
| | | | | | | | | | | Add RWF_APPEND to RWF_SUPPORTED to support Linux kernel 4.16. [BZ #22947] * bits/uio-ext.h (RWF_APPEND): New. * sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_APPEND): Likewise. * manual/llio.texi: Document RWF_APPEND. * misc/tst-preadvwritev2-common.c (RWF_APPEND): New. (RWF_SUPPORTED): Add RWF_APPEND.
* Fix errno valuesSamuel Thibault2018-03-201-10/+0
| | | | | | * manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): Remove errno values from Linux-specific section now that it is in the GNU section. * sysdeps/gnu/errlist.c: Regenerate.
* Add narrowing subtract functions.Joseph Myers2018-03-201-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* hurd: Reimplement libc locks using mach's gsyncAgustina Arzille2018-03-181-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * hurd/Makefile (routines): Add hurdlock. * hurd/Versions (GLIBC_PRIVATE): Added new entry to export the above interface. (HURD_CTHREADS_0.3): Remove __libc_getspecific. * hurd/hurdpid.c: Include <lowlevellock.h> (_S_msg_proc_newids): Use lll_wait to synchronize. * hurd/hurdsig.c: (reauth_proc): Use __mutex_lock and __mutex_unlock. * hurd/setauth.c: Include <hurdlock.h>, use integer for synchronization. * mach/Makefile (lock-headers): Remove machine-lock.h. * mach/lock-intern.h: Include <lowlevellock.h> instead of <machine-lock.h>. (__spin_lock_t): New type. (__SPIN_LOCK_INITIALIZER): New macro. (__spin_lock, __spin_unlock, __spin_try_lock, __spin_lock_locked, __mutex_init, __mutex_lock_solid, __mutex_unlock_solid, __mutex_lock, __mutex_unlock, __mutex_trylock): Use lll to implement locks. * mach/mutex-init.c: Include <lowlevellock.h> instead of <cthreads.h>. (__mutex_init): Initialize with lll. * manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): New errno values. * sysdeps/mach/Makefile: Add libmachuser as dependencies for libs needing lll. * sysdeps/mach/hurd/bits/errno.h: Regenerate. * sysdeps/mach/hurd/cthreads.c (__libc_getspecific): Remove function. * sysdeps/mach/hurd/bits/libc-lock.h: Remove file. * sysdeps/mach/hurd/setpgid.c: Include <lowlevellock.h>. (__setpgid): Use lll for synchronization. * sysdeps/mach/hurd/setsid.c: Likewise with __setsid. * sysdeps/mach/bits/libc-lock.h: Include <tls.h> and <lowlevellock.h> instead of <cthreads.h>. (_IO_lock_inexpensive): New macro (__libc_lock_recursive_t, __rtld_lock_recursive_t): New structures. (__libc_lock_self0): New declaration. (__libc_lock_owner_self): New macro. (__libc_key_t): Remove type. (_LIBC_LOCK_INITIALIZER): New macro. (__libc_lock_define_initialized, __libc_lock_init, __libc_lock_fini, __libc_lock_fini_recursive, __rtld_lock_fini_recursive, __libc_lock_lock, __libc_lock_trylock, __libc_lock_unlock, __libc_lock_define_initialized_recursive, __rtld_lock_define_initialized_recursive, __libc_lock_init_recursive, __libc_lock_trylock_recursive, __libc_lock_lock_recursive, __libc_lock_unlock_recursive, __rtld_lock_initialize, __rtld_lock_trylock_recursive, __rtld_lock_lock_recursive, __rtld_lock_unlock_recursive __libc_once_define, __libc_mutex_unlock): Reimplement with lll. (__libc_lock_define_recursive, __rtld_lock_define_recursive, _LIBC_LOCK_RECURSIVE_INITIALIZER, _RTLD_LOCK_RECURSIVE_INITIALIZER): New macros. Include <libc-lockP.h> to reimplement libc_key* with pthread_key*. * hurd/hurdlock.c: New file. * hurd/hurdlock.h: New file. * mach/lowlevellock.h: New file
* manual: Update _DEFAULT_SOURCE. [BZ #22862]Rical Jasan2018-02-211-7/+14
| | | | | | | | | | | | | | | | | The description of the interplay between feature test macros and compiler options in the description of _DEFAULT_SOURCE is a little confusing, and dated, so clarify the situation, and don't assume a specific value for _DEFAULT_SOURCE. Also, _DEFAULT_SOURCE is supposed to be defined if none of the C/POSIX feature test macros are defined, but the condition was lacking a test for _ISOC11_SOURCE, so that is also addressed. [BZ #22862] * include/features.h: Add _ISOC11_SOURCE to test for whether to define _DEFAULT_SOURCE. * manual/creature.texi (_DEFAULT_SOURCE): Improve documentation.
* manual: Update the _ISOC99_SOURCE description.Rical Jasan2018-02-201-4/+3
| | | | | | | | The current description refers to ISO C99 not being widely adopted, which it is believed to be now. * manual/creature.texi (_ISOC99_SOURCE): Update the dated description.
* manual: Document missing feature test macros.Rical Jasan2018-02-201-2/+37
| | | | | | | | | | | | | | Several feature test macros are documented in features.h but absent in the manual, and some documented macros accept undocumented values. This commit updates the manual to mention all the accepted macros, along with any values that hold special meaning. * manual/creature.texi (_POSIX_C_SOURCE): Document special values of 199606L, 200112L, and 200809L. (_XOPEN_SOURCE): Document special values of 600 and 700. (_ISOC11_SOURCE): Document macro. (_ATFILE_SOURCE): Likewise. (_FORTIFY_SOURCE): Likewise.
* manual: Improve documentation of get_current_dir_name. [BZ #6889]Rical Jasan2018-02-191-8/+9
| | | | | | | | | | | This is a minor rewording to clarify the behaviour of get_current_dir_name. Additionally, the @vindex is moved above the @deftypefun so that following links give a better result with regard to context. [BZ #6889] * manual/filesys.texi (get_current_dir_name): Clarify behaviour.
* manual: Fix a syntax error.Rical Jasan2018-02-161-1/+1
| | | | | | | | | | | | | The opening parenthesis for function arguments in an @deftypefun need to be separated from the function name. This isn't just a matter of the GNU coding style---it causes the "(void" (in this case) to be rendered as a part of the function name, causing a visual defect, and also results in a warning to the following effect during `make pdf': Warning: unbalanced parentheses in @def...) * manual/platform.texi (__riscv_flush_icache): Fix @deftypefun syntax.
* Document use of CC and CFLAGS in more detail (bug 20980, bug 21234).Joseph Myers2018-02-151-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some bug reports from people setting CFLAGS not including a -O option and then being confused when the build fails. This patch addresses this by documenting the proper use of CC and CFLAGS in more detail - saying what options should go where and specifying the requirement to compile with optimization. The previous text incorrectly used @var markup with CC and CFLAGS. The correct markup for environment variables is @env, but it's also the case that passing such variables explicitly on the configure command line is preferred to passing them in the environment, so this patch changes the documentation to describe passing them on the command line (and uses @code). In many cases putting options in the wrong place may in fact work, but I believe what I've specified is the correct rule for which options to put where. [BZ #20980] [BZ #21234] * manual/install.texi (Configuring and compiling): Describe passing CC and CFLAGS on configure command line, not as environment variables. Use @code markup on those variables. Specify what options go in CC and what go in CFLAGS. Note the requirement to compile with optimization. * INSTALL: Regenerated.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-07 01:59:06 +0000