mirror/glibc - mirror of git://sourceware.org/git/glibc.git

	Commit message (Collapse)	Author	Age	Files	Lines
*	Remove --with-fp / --without-fp.	Joseph Myers	2017-12-12	1	-4/+0
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc.
*	manual: Fix a typo in locale.texi.	Rical Jasan	2017-12-12	1	-1/+1
\| \| \| \|	* manual/locale.texi (nl_langinfo): Fix a typo.
*	manual/conf.texi: add a missing underscore in front of SC_SSIZE_MAX [BZ #22588]	Aurelien Jarno	2017-12-12	1	-1/+1
\| \| \| \| \|	Changelog: * manual/conf.texi (SC_SSIZE_MAX): Rename into _SC_SSIZE_MAX.
*	powerpc: POWER8 memcpy optimization for cached memory	Adhemerval Zanella	2017-12-11	1	-0/+10
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	On POWER8, unaligned memory accesses to cached memory has little impact on performance as opposed to its ancestors. It is disabled by default and will only be available when the tunable glibc.tune.cached_memopt is set to 1. __memcpy_power8_cached __memcpy_power7 ============================================================ max-size=4096: 33325.70 ( 12.65%) 38153.00 max-size=8192: 32878.20 ( 11.17%) 37012.30 max-size=16384: 33782.20 ( 11.61%) 38219.20 max-size=32768: 33296.20 ( 11.30%) 37538.30 max-size=65536: 33765.60 ( 10.53%) 37738.40 * manual/tunables.texi (Hardware Capability Tunables): Document glibc.tune.cached_memopt. * sysdeps/powerpc/cpu-features.c: New file. * sysdeps/powerpc/cpu-features.h: New file. * sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add _dl_powerpc_cpu_features. * sysdeps/powerpc/dl-tunables.list: New file. * sysdeps/powerpc/ldsodefs.h: Include cpu-features.h. * sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h (INIT_ARCH): Initialize use_aligned_memopt. * sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED && IS_IN(rtld))]: Restrict dl_platform_init availability and initialize CPU features used by tunables. * sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines): Add memcpy-power8-cached. * sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add __memcpy_power8_cached. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S: New file. Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
*	Add _Float32 function aliases.	Joseph Myers	2017-12-07	1	-1/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch concludes filling out TS 18661-3 support for different types by adding f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
*	Add _Float64, _Float32x function aliases.	Joseph Myers	2017-12-06	1	-3/+4
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch continues filling out TS 18661-3 support by adding f64 and f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
*	Add elision tunables	Rogerio Alves	2017-12-05	2	-3/+69
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch adds several new tunables to control the behavior of elision on supported platforms[1]. Since elision now depends on tunables, we should always compile with elision enabled, and leave the code disabled, but available for runtime selection. This gives us much better compile-time testing of the existing code to avoid bit-rot[2]. Tested on ppc, ppc64, ppc64le, s390x and x86_64. [1] This part of the patch was initially proposed by Paul Murphy but was "staled" because the framework have changed since the patch was originally proposed: https://patchwork.sourceware.org/patch/10342/ [2] This part of the patch was inititally proposed as a RFC by Carlos O'Donnell. Make sense to me integrate this on the patch: https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html * elf/dl-tunables.list: Add elision parameters. * manual/tunables.texi: Add entries about elision tunable. * sysdeps/unix/sysv/linux/powerpc/elision-conf.c: Add callback functions to dynamically enable/disable elision. Add multiple callbacks functions to set elision parameters. Deleted __libc_enable_secure check. * sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise. * sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise. * configure: Regenerated. * configure.ac: Option enable_lock_elision was deleted. * config.h.in: ENABLE_LOCK_ELISION flag was deleted. * config.make.in: Remove references to enable_lock_elision. * manual/install.texi: Elision configure option was removed. * INSTALL: Regenerated to remove enable_lock_elision. * nptl/Makefile: Disable elision so it can verify error case for destroying a mutex. * sysdeps/powerpc/nptl/elide.h: Cleanup ENABLE_LOCK_ELISION check. Deleted macros for the case when ENABLE_LOCK_ELISION was not defined. * sysdeps/s390/configure: Regenerated. * sysdeps/s390/configure.ac: Remove references to enable_lock_elision.. * nptl/tst-mutex8.c: Deleted all #ifndef ENABLE_LOCK_ELISION from the test. * sysdeps/powerpc/powerpc32/sysdep.h: Deleted all ENABLE_LOCK_ELISION checks. * sysdeps/powerpc/powerpc64/sysdep.h: Likewise. * sysdeps/powerpc/sysdep.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise. * sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/Makefile: Remove references to enable-lock-elision. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
*	Linux: Implement interfaces for memory protection keys	Florian Weimer	2017-12-05	1	-0/+232
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect, and x86-64 implementations of pkey_get and pkey_set, which abstract over the PKRU CPU register and hide the actual number of memory protection keys supported by the CPU. pkey_mprotect with a -1 key is implemented using mprotect, so it will work even if the kernel does not support the pkey_mprotect system call. The system call wrapers use unsigned int instead of unsigned long for parameters, so that no special treatment for x32 is needed. The flags argument is currently unused, and the access rights bit mask is limited to two bits by the current PKRU register layout anyway. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
*	plural.c: improve reproducibility	Juro Bystricky	2017-11-30	1	-8/+6
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	There is a subtle non-determinism when building glibc. This depends on whether the glibc is built using the distibuted file intl/plural.c or built using the generated file intl/plural.c. These two files (intl/plural.c generated vs. distributed) are slightly different, hence we may end up with slightly different libraries. Originally, having "bison" installed was optional. So if "bison" was not present, we always built libraries with the distributed plural.c. If bison was installed, we * may have * replaced the distributed file plural.c with a new plural.c generated from plural.y. if the timestamps triggered this rule: plural.c plural.y $(BISON) $(BISONFLAGS) $@ $^ Given that timestamps are not preserved in GIT repositories, the above rule is not reliable without explicitly touching plural.c or plural.y. In other words, the rule may or may not have fired. In summary: there are two distinct sources of non-determinism: 1. Having "bison" installed or not 2. Having "bison" installed but timestamps poorly defined. This patch fixes this by requiring "bison" being installed and by always generating intl/plural.c from intl/plural.y. (This is achieved by simply removing checked-in intl/plural.c) [BZ #22432] * configure.ac (BISON): Require to be present. * configure: Regenerated. * intl/Makefile (generated): Add plural.c. [$(BISON) != no]: Make code unconditional. (plural.c): Change rule to $(objpfx)plural.c. ($(objpfx)plural.o): Depend on $(objpfx)plural.c. * intl/plural.c: Remove. * manual/install.texi (Tools for Compilation): Document bison as required. * INSTALL: Regenerated.
*	Implement the mlock2 function	Florian Weimer	2017-11-27	1	-2/+30
\| \| \| \| \| \|	Fallback using mlock is provided if the flags argument is zero. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
*	Add _Float64x function aliases.	Joseph Myers	2017-11-27	1	-3/+3
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch continues filling out TS 18661-3 support by adding f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __ function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
*	Linux: Add memfd_create system call wrapper	Florian Weimer	2017-11-23	1	-0/+63
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	The system call is somewhat obscure because it is closely related to file descriptor sealing. However, it is also the recommended way to create alias mappings, which is why it has more general use. No emulation is provided. Except for the name of the /proc/self/fd links, it would be possible to implement an approximation using O_TMPFILE and tmpfs, but this does not appear to be worth the added complexity. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
*	manual: Document the MAP_HUGETLB, MADV_HUGEPAGE, MADV_NOHUGEPAGE flags	Florian Weimer	2017-11-20	1	-5/+49
\|
*	manual: Document mprotect and introduce section on memory protection	Florian Weimer	2017-11-19	2	-11/+125
\|
*	manual: Move preadv/writev variants to Scatter-Gather section	Florian Weimer	2017-11-19	1	-211/+201
\| \| \| \| \| \|	Also remove a comment about performance. fwrite vs writev performance is a very complex topic and cannot be reduced to a simple advice based on transfer size.
*	Prefer https for Sourceware links	Siddhesh Poyarekar	2017-11-16	1	-2/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Update all sourceware links to https. The website redirects everything to https anyway so let the web server do a bit less work. The only reference that remains unchanged is the one in the old ChangeLog, since it didn't seem worth changing it. * NEWS: Update sourceware link to https. * configure.ac: Likewise. * crypt/md5test-giant.c: Likewise. * dlfcn/bug-atexit1.c: Likewise. * dlfcn/bug-atexit2.c: Likewise. * localedata/README: Likewise. * malloc/tst-mallocfork.c: Likewise. * manual/install.texi: Likewise. * nptl/tst-pthread-getattr.c: Likewise. * stdio-common/tst-fgets.c: Likewise. * stdio-common/tst-fwrite.c: Likewise. * sunrpc/Makefile: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise. * wcsmbs/tst-mbrtowc2.c: Likewise. * configure: Regenerate. * INSTALL: Regenerate.
*	manual: Update to mention ENODEV for ttyname and ttyname_r	Luke Shumaker	2017-11-15	1	-0/+5
\| \| \| \| \| \| \| \|	Commit 15e9a4f378c8607c2ae1aa465436af4321db0e23 introduced ENODEV as a possible error condition for ttyname and ttyname_r. Update the manual to mention this GNU extension. Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
*	manual: Document the O_TMPFILE flag	Florian Weimer	2017-11-04	1	-0/+28
\| \| \| \|	Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
*	manual: Document the linkat function	Florian Weimer	2017-11-04	1	-1/+29
\| \| \| \|	Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
*	aarch64: Document _SC_LEVEL1_DCACHE_LINESIZE caveat	Siddhesh Poyarekar	2017-10-23	1	-0/+12
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The _SC_LEVEL1_DCACHE_LINESIZE is reported using the contents of the ctr_el0 register, which tells us the minimum observable cache line size by userspace. This typically is the same as the L1 cache line size, but that may not always be true. It could be a higher level cache line size as long as cache cleaning and invalidation work correctly with that line size in userspace. The falkor core for example reports the L2 line size as the dcache line size in CTR_EL0 while also reporting the correct L1 dcache line size via CCSIDR_EL1. * manual/conf.texi (_SC_LEVEL1_DCACHE_LINESIZE, _SC_LEVEL1_ICACHE_LINESIZE): Document aarch64 caveat. Reviewed-by: Rical Jasan <ricaljasan@pacific.net> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
*	Document cache information sysconf variables	Siddhesh Poyarekar	2017-10-23	1	-0/+61
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Write short descriptions for each of the cache information sysconf variables. * manual/conf.texi (_SC_LEVEL1_ICACHE_SIZE, _SC_LEVEL1_ICACHE_ASSOC, _SC_LEVEL1_ICACHE_LINESIZE, _SC_LEVEL1_DCACHE_SIZE, _SC_LEVEL1_DCACHE_ASSOC, _SC_LEVEL1_DCACHE_LINESIZE, _SC_LEVEL2_CACHE_SIZE, _SC_LEVEL2_CACHE_ASSOC, _SC_LEVEL2_CACHE_LINESIZE, _SC_LEVEL3_CACHE_SIZE, _SC_LEVEL3_CACHE_ASSOC, _SC_LEVEL3_CACHE_LINESIZE, _SC_LEVEL4_CACHE_SIZE, _SC_LEVEL4_CACHE_ASSOC, _SC_LEVEL4_CACHE_LINESIZE): New variables. Reviewed-by: Rical Jasan <ricaljasan@pacific.net>
*	Add _Float128 function aliases.	Joseph Myers	2017-10-18	1	-1/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch adds support for f128 function aliases on platforms where long double has the binary128 format (and thus GCC 7 provides the _Float128 type with the same ABI as long double but as a distinct type in terms of C type compatibility). This is the same API as provided in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128 has a different format from long double, with the bulk of the API coming from TS 18661-3. All the functions alias the corresponding long double functions, and __ function names are not provided since those are only needed once for each floating-point format, not more than once for different types with the same format (so for example, -ffinite-math-only maps foof128 to __fool_finite, while type-generic macros end up calling e.g. __issignalingl for _Float128 arguments on such platforms). The preparation for this feature was done in previous patches, so this one just needs to add the relevant makefile and header definitions, and update macro definitions of libm_alias_ldouble_other_r, to turn on the feature, and update documentation and ABI baselines. Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py with both GCC 6 and GCC 7. * sysdeps/ieee754/ldbl-128/Makeconfig: New file. * sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise. * sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise. * sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * manual/math.texi (Mathematics): Document additional architecture support for _Float128. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
*	Remove add-ons mechanism.	Joseph Myers	2017-10-05	4	-48/+5
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
*	Remove Banner mechanism.	Joseph Myers	2017-09-22	1	-0/+3
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch removes the Banner mechanism, with the last remaining Banner file replaced by a contrib.texi entry. This accords with the principle that the output of running libc.so.6 is not the place to credit particular contributions (the manual is), and with all other configuration options not mentioned there, it doesn't seem appropriate to focus there on the one question of whether the one remaining piece configured as an add-on was enabled or not. Tested for x86_64. * csu/Makefile (generated): Do not add version-info.h. (before-compile): Likewise. (all-Banner-files): Remove variable. ($(objpfx)version-info.h): Remove rule. * csu/version.c (banner): Do not include "version-info.h". * libidn/Banner: Remove. * manual/contrib.texi (Simon Josefsson): New entry.
*	Remove non-add-on Banner files.	Joseph Myers	2017-09-21	1	-3/+4
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Various subdirectories of glibc include Banner files to put some text in the output of executing libc.so.6, under "Available extensions". Some of those subdirectories (e.g. crypt) may originally have been add-ons (and so optional, so a particular glibc build might or might not have included them), but except for libidn they aren't now (or if only included in some builds, in the case of soft-fp, the inclusion depends on the architecture for which glibc is configured rather than having any glibc configuration for which it's an optional feature), and it doesn't seem useful for the libc.so.6 output to call out a few features like that. This patch removes the non-add-on Banner files, updating contrib.texi where they noted contributions not otherwise mentioned there. Tested for x86_64. * crypt/Banner: Remove file. * nptl/Banner: Likewise. * resolv/Banner: Likewise. * soft-fp/Banner: Likewise. * nptl/Makefile ($(objpfx)banner.h): Remove rule. ($(objpfx)version.d): Remove dependency on banner.h. ($(objpfx)version.os): Likewise. * nptl/version.c (banner): Do not include banner.h. * manual/contrib.texi: Update entries for Richard Henderson, Jakub Jelinek and BIND code.
*	Remove compat from DEFAULT_CONFIG lookup strings	Steve Ellcey	2017-09-12	1	-7/+11
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	* grp/initgroups.c: Include config.h. (DEFAULT_CONFIG): New macro. (internal_getgrouplist): Use DEFAULT_CONFIG. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nsswitch.c (__nss_disable_nscd): Likewise. (DEFAULT_DEFCONFIG): New macro. (__nss_database_lookup): Use DEFAULT_DEFCONFIG. * nss/grp-lookup.c: Include config.h (DEFAULT_CONFIG): Set definition based on LINK_OBSOLETE_NSL. * nss/pwd-lookup.c (DEFAULT_CONFIG): Likewise. * nss/spwd-lookup.c (DEFAULT_CONFIG): Likewise. * manual/nss.texi: Update default values section.
*	Add thunderx2t99 and thunderx2t99p1 CPU names to tunables list	Steve Ellcey	2017-09-08	1	-1/+2
\| \| \| \| \| \| \|	* manual/tunables.texi (glibc.tune.cpu): Add thunderx2t99 and thunderx2t99p1 to list of cpu names. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list): Add thunderx2t99 and thunderx2t99p1 entries to cpu_list.
*	Obsolete pow10 functions.	Joseph Myers	2017-09-01	1	-9/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
*	Credit Ulrich Drepper for libpthread in contrib.texi	H.J. Lu	2017-09-01	1	-0/+1
\| \| \| \| \|	* manual/contrib.texi: Credit Ulrich Drepper for the POSIX Threads Library.
*	Remove obsolete notes at top level of source tree.	Zack Weinberg	2017-09-01	2	-0/+310
\| \| \| \| \|	* BUGS, CONFORMANCE, NAMESPACE, WUR-REPORT: Deleted. * README.pretty-printers, README.tunables: Move to manual/.
*	malloc: Remove check_action variable [BZ #21754]	Florian Weimer	2017-08-30	2	-8/+0
\| \| \| \| \| \| \| \| \| \| \|	Clean up calls to malloc_printerr and trim its argument list. This also removes a few bits of work done before calling malloc_printerr (such as unlocking operations). The tunable/environment variable still enables the lightweight additional malloc checking, but mallopt (M_CHECK_ACTION) no longer has any effect.
*	malloc: Abort on heap corruption, without a backtrace [BZ #21754]	Florian Weimer	2017-08-30	2	-32/+16
\| \| \| \| \|	The stack trace printing caused deadlocks and has been itself been targeted by code execution exploits.
*	Obsolete matherr, _LIB_VERSION, libieee.a.	Joseph Myers	2017-08-21	1	-8/+0
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT \|\| !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
*	manual: Rewrite the section on widths of integer types.	Rical Jasan	2017-08-10	1	-40/+39
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The manual contradicted itself by saying the number of bits in an integer type needed to be computed, and then listing a number of macros that later standards provided for exactly that. The entire section has been reworked to provide those macros first, while preserving the documentation of CHAR_BIT and the associated examples within that context. * manual/lang.texi (Computing the Width of an Integer Data Type): Rename section to "Width of an Integer Type". Remove inaccurate statement regarding lack of C language facilities for determining width of integer types, and reorder content to improve flow and context of discussion.
*	manual: Update @standards for [__]va_copy.	Rical Jasan	2017-08-10	1	-6/+9
\| \| \| \| \| \| \| \| \| \| \| \|	The ISO version in which va_copy was introduced is made explicit, and __va_copy is given @standards. The description is updated to be more clear about the origins of each macro, and the reader is informed these macros are now provided by the compiler (information previously embedded in a Texinfo @comment). * lang.texi (va_copy): Change standard from ISO to C99. (__va_copy): Add standard and header annotation. Update description for clarity of origins and current use.
*	aarch64: Optimized memcpy for Qualcomm Falkor processor	Siddhesh Poyarekar	2017-08-09	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This is an optimized implementation of the memcpy routine that gives a significant gain in performance for all sizes of copies on the Qualcomm Falkor processor. A detailed rationale of the implementation is written in a comment in the patch. This implementation improves time for copies up to 128 bytes by up to 15% and for larger copies by up to 35% in the glibc microbenchmark. The memcpy-random benchmark sees improvements in all sizes in the range of 13%-18%. Here are the full numbers extracted from the glibc microbenchmark using the commands: ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic length align1 align2 ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy-large.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic length align1 align2 ../benchtests/scripts/compare_strings.py benchtests/bench-memcpy-random.out \ ../benchtests/scripts/benchout_strings.schema.json \ -base=__memcpy_generic max-size Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: default ================================================================================ length=1,align1=0,align2=0: 33.59 (-115.00%) 15.62 (0.00%) 15.62 length=1,align1=0,align2=0: 16.41 (-10.53%) 14.06 (5.26%) 14.84 length=1,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=1,align1=0,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=1,align2=0: 15.62 (-5.26%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=1: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=1,align2=1: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=4,align1=0,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=4,align1=2,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=4,align1=0,align2=2: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=4,align1=2,align2=2: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=8,align1=0,align2=0: 14.84 (-5.56%) 13.28 (5.56%) 14.06 length=8,align1=3,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=8,align1=0,align2=3: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=8,align1=3,align2=3: 13.28 (-6.25%) 13.28 (-6.25%) 12.50 length=16,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=16,align1=4,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=16,align1=0,align2=4: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=16,align1=4,align2=4: 13.28 (-6.25%) 12.50 (0.00%) 12.50 length=32,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=32,align1=5,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=32,align1=0,align2=5: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=32,align1=5,align2=5: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=64,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=64,align1=6,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=64,align1=0,align2=6: 14.06 (5.26%) 14.06 (5.26%) 14.84 length=64,align1=6,align2=6: 14.84 (-11.77%) 14.06 (-5.88%) 13.28 length=128,align1=0,align2=0: 17.19 (-4.76%) 14.84 (9.52%) 16.41 length=128,align1=7,align2=0: 16.41 (4.55%) 15.62 (9.09%) 17.19 length=128,align1=0,align2=7: 16.41 (0.00%) 14.06 (14.29%) 16.41 length=128,align1=7,align2=7: 16.41 (4.55%) 15.62 (9.09%) 17.19 length=256,align1=0,align2=0: 21.88 (-3.70%) 21.09 (0.00%) 21.09 length=256,align1=8,align2=0: 21.09 (-3.85%) 21.09 (-3.85%) 20.31 length=256,align1=0,align2=8: 20.31 (-4.00%) 20.31 (-4.00%) 19.53 length=256,align1=8,align2=8: 21.88 (-7.69%) 20.31 (0.00%) 20.31 length=512,align1=0,align2=0: 28.91 (-2.78%) 28.91 (-2.78%) 28.12 length=512,align1=9,align2=0: 30.47 (-2.63%) 30.47 (-2.63%) 29.69 length=512,align1=0,align2=9: 29.69 (0.00%) 29.69 (0.00%) 29.69 length=512,align1=9,align2=9: 28.12 (-2.86%) 28.12 (-2.86%) 27.34 length=1024,align1=0,align2=0: 44.53 (0.00%) 44.53 (0.00%) 44.53 length=1024,align1=10,align2=0: 50.00 (0.00%) 50.00 (0.00%) 50.00 length=1024,align1=0,align2=10: 49.22 (1.56%) 50.78 (-1.56%) 50.00 length=1024,align1=10,align2=10: 44.53 (-1.79%) 43.75 (0.00%) 43.75 length=2048,align1=0,align2=0: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=2048,align1=11,align2=0: 89.84 (0.00%) 89.84 (0.00%) 89.84 length=2048,align1=0,align2=11: 89.84 (0.00%) 89.84 (0.00%) 89.84 length=2048,align1=11,align2=11: 75.78 (0.00%) 75.78 (0.00%) 75.78 length=4096,align1=0,align2=0: 141.41 (-0.56%) 140.62 (0.00%) 140.62 length=4096,align1=12,align2=0: 171.09 (-0.46%) 170.31 (0.00%) 170.31 length=4096,align1=0,align2=12: 170.31 (0.00%) 170.31 (0.00%) 170.31 length=4096,align1=12,align2=12: 140.62 (0.00%) 140.62 (0.00%) 140.62 length=8192,align1=0,align2=0: 278.91 (-0.28%) 275.78 (0.84%) 278.12 length=8192,align1=13,align2=0: 338.28 (0.23%) 335.94 (0.92%) 339.06 length=8192,align1=0,align2=13: 338.28 (0.00%) 455.47 (-34.64%) 338.28 length=8192,align1=13,align2=13: 278.12 (-0.28%) 275.78 (0.56%) 277.34 length=16384,align1=0,align2=0: 535.94 (-0.15%) 531.25 (0.73%) 535.16 length=16384,align1=14,align2=0: 659.38 (0.12%) 659.38 (0.12%) 660.16 length=16384,align1=0,align2=14: 659.38 (0.00%) 657.03 (0.36%) 659.38 length=16384,align1=14,align2=14: 535.16 (0.44%) 532.81 (0.87%) 537.50 length=32768,align1=0,align2=0: 1260.94 (10.68%) 1121.88 (20.53%) 1411.72 length=32768,align1=15,align2=0: 1368.75 (10.02%) 1376.56 (9.50%) 1521.09 length=32768,align1=0,align2=15: 1333.59 (10.91%) 1373.44 (8.25%) 1496.88 length=32768,align1=15,align2=15: 1256.25 (13.96%) 1125.78 (22.90%) 1460.16 length=65536,align1=0,align2=0: 2853.91 (30.11%) 2589.06 (36.60%) 4083.59 length=65536,align1=16,align2=0: 2850.00 (30.14%) 2589.84 (36.52%) 4079.69 length=65536,align1=0,align2=16: 2853.12 (30.60%) 2589.84 (37.00%) 4110.94 length=65536,align1=16,align2=16: 2850.78 (30.07%) 2589.06 (36.49%) 4076.56 length=0,align1=0,align2=0: 15.62 (-5.26%) 16.41 (-10.53%) 14.84 length=0,align1=0,align2=0: 14.84 (-5.56%) 14.84 (-5.56%) 14.06 length=0,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=0,align1=0,align2=0: 16.41 (-16.67%) 14.84 (-5.56%) 14.06 length=1,align1=0,align2=0: 15.62 (4.76%) 15.62 (4.76%) 16.41 length=1,align1=1,align2=0: 15.62 (0.00%) 14.84 (5.00%) 15.62 length=1,align1=0,align2=1: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=1,align1=1,align2=1: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=0: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=2,align2=0: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=2,align1=0,align2=2: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=2,align1=2,align2=2: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=3,align1=0,align2=0: 14.84 (0.00%) 14.84 (0.00%) 14.84 length=3,align1=3,align2=0: 14.84 (-5.56%) 14.06 (0.00%) 14.06 length=3,align1=0,align2=3: 15.62 (-11.11%) 14.06 (0.00%) 14.06 length=3,align1=3,align2=3: 14.84 (0.00%) 14.06 (5.26%) 14.84 length=4,align1=0,align2=0: 17.97 (-27.78%) 14.06 (0.00%) 14.06 length=4,align1=4,align2=0: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=4,align1=0,align2=4: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=4,align1=4,align2=4: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=5,align1=0,align2=0: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=5,align1=5,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=5,align1=0,align2=5: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=5,align1=5,align2=5: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=6,align1=0,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=6,align1=6,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=6,align1=0,align2=6: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=6,align1=6,align2=6: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=7,align1=0,align2=0: 14.84 (-11.77%) 14.06 (-5.88%) 13.28 length=7,align1=7,align2=0: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=7,align1=0,align2=7: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=7,align1=7,align2=7: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=8,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=8,align1=8,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=8,align1=0,align2=8: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=8,align1=8,align2=8: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=9,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=9,align1=9,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=9,align1=0,align2=9: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=9,align1=9,align2=9: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=10,align1=0,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=10,align1=10,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=10,align1=0,align2=10: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=10,align1=10,align2=10: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=11,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=11,align1=11,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=11,align1=0,align2=11: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=11,align1=11,align2=11: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=12,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=12,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=0,align2=12: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=12,align1=12,align2=12: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=13,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=13,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=0,align2=13: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=13,align1=13,align2=13: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=14,align1=0,align2=0: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=14,align1=14,align2=0: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=14,align1=0,align2=14: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=14,align1=14,align2=14: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=15,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=15,align1=15,align2=0: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=15,align1=0,align2=15: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=15,align1=15,align2=15: 13.28 (0.00%) 14.06 (-5.88%) 13.28 length=16,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=16,align1=16,align2=0: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=16,align1=0,align2=16: 14.84 (-11.77%) 13.28 (0.00%) 13.28 length=16,align1=16,align2=16: 13.28 (-6.25%) 12.50 (0.00%) 12.50 length=17,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=17,align1=17,align2=0: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=17,align1=0,align2=17: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=17,align1=17,align2=17: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=18,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=18,align1=18,align2=0: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=18,align1=0,align2=18: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=18,align1=18,align2=18: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=19,align1=0,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=19,align1=19,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=19,align1=0,align2=19: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=19,align1=19,align2=19: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=20,align1=0,align2=0: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=20,align1=20,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=20,align1=0,align2=20: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=20,align1=20,align2=20: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=21,align1=0,align2=0: 14.84 (-5.56%) 12.50 (11.11%) 14.06 length=21,align1=21,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=21,align1=0,align2=21: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=21,align1=21,align2=21: 13.28 (5.56%) 13.28 (5.56%) 14.06 length=22,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=22,align1=22,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=22,align1=0,align2=22: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=22,align1=22,align2=22: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=23,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=23,align1=23,align2=0: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=23,align1=0,align2=23: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=23,align1=23,align2=23: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=24,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=24,align1=24,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=24,align1=0,align2=24: 14.84 (-11.77%) 12.50 (5.88%) 13.28 length=24,align1=24,align2=24: 14.06 (-5.88%) 13.28 (0.00%) 13.28 length=25,align1=0,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=25,align1=25,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=25,align1=0,align2=25: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=25,align1=25,align2=25: 13.28 (0.00%) 13.28 (0.00%) 13.28 length=26,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=26,align1=26,align2=0: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=26,align1=0,align2=26: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=26,align1=26,align2=26: 14.06 (0.00%) 13.28 (5.56%) 14.06 length=27,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=27,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=0,align2=27: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=27,align1=27,align2=27: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=28,align1=28,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=0,align2=28: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=28,align1=28,align2=28: 14.84 (-11.77%) 13.28 (0.00%) 13.28 length=29,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=29,align1=29,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=29,align1=0,align2=29: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=29,align1=29,align2=29: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=30,align1=0,align2=0: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=30,align1=30,align2=0: 13.28 (5.56%) 12.50 (11.11%) 14.06 length=30,align1=0,align2=30: 14.06 (-5.88%) 12.50 (5.88%) 13.28 length=30,align1=30,align2=30: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=0,align2=0: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=31,align2=0: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=31,align1=0,align2=31: 13.28 (0.00%) 12.50 (5.88%) 13.28 length=31,align1=31,align2=31: 14.06 (0.00%) 12.50 (11.11%) 14.06 length=48,align1=0,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=48,align1=3,align2=0: 14.06 (0.00%) 14.06 (0.00%) 14.06 length=48,align1=0,align2=3: 14.06 (-5.88%) 14.06 (-5.88%) 13.28 length=48,align1=3,align2=3: 13.28 (5.56%) 14.06 (0.00%) 14.06 length=80,align1=0,align2=0: 15.62 (-11.11%) 14.84 (-5.56%) 14.06 length=80,align1=5,align2=0: 15.62 (-11.11%) 16.41 (-16.67%) 14.06 length=80,align1=0,align2=5: 14.06 (0.00%) 15.62 (-11.11%) 14.06 length=80,align1=5,align2=5: 15.62 (-5.26%) 17.19 (-15.79%) 14.84 length=96,align1=0,align2=0: 14.06 (0.00%) 14.84 (-5.56%) 14.06 length=96,align1=6,align2=0: 14.84 (-5.56%) 16.41 (-16.67%) 14.06 length=96,align1=0,align2=6: 14.06 (0.00%) 14.84 (-5.56%) 14.06 length=96,align1=6,align2=6: 14.84 (-5.56%) 17.19 (-22.22%) 14.06 length=112,align1=0,align2=0: 17.19 (-4.76%) 14.06 (14.29%) 16.41 length=112,align1=7,align2=0: 17.19 (0.00%) 16.41 (4.55%) 17.19 length=112,align1=0,align2=7: 16.41 (0.00%) 14.84 (9.52%) 16.41 length=112,align1=7,align2=7: 17.19 (0.00%) 17.19 (0.00%) 17.19 length=144,align1=0,align2=0: 17.19 (-10.00%) 17.97 (-15.00%) 15.62 length=144,align1=9,align2=0: 17.19 (-4.76%) 18.75 (-14.29%) 16.41 length=144,align1=0,align2=9: 20.31 (-8.33%) 18.75 (0.00%) 18.75 length=144,align1=9,align2=9: 18.75 (-4.35%) 18.75 (-4.35%) 17.97 length=160,align1=0,align2=0: 18.75 (-4.35%) 17.97 (0.00%) 17.97 length=160,align1=10,align2=0: 18.75 (4.00%) 18.75 (4.00%) 19.53 length=160,align1=0,align2=10: 19.53 (-4.17%) 17.97 (4.17%) 18.75 length=160,align1=10,align2=10: 18.75 (-4.35%) 18.75 (-4.35%) 17.97 length=176,align1=0,align2=0: 18.75 (-4.35%) 17.19 (4.35%) 17.97 length=176,align1=11,align2=0: 19.53 (0.00%) 19.53 (0.00%) 19.53 length=176,align1=0,align2=11: 19.53 (-4.17%) 18.75 (0.00%) 18.75 length=176,align1=11,align2=11: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=192,align1=0,align2=0: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=192,align1=12,align2=0: 21.09 (-8.00%) 18.75 (4.00%) 19.53 length=192,align1=0,align2=12: 18.75 (0.00%) 18.75 (0.00%) 18.75 length=192,align1=12,align2=12: 18.75 (0.00%) 17.97 (4.17%) 18.75 length=208,align1=0,align2=0: 17.97 (0.00%) 20.31 (-13.04%) 17.97 length=208,align1=13,align2=0: 19.53 (7.41%) 21.09 (0.00%) 21.09 length=208,align1=0,align2=13: 23.44 (-11.11%) 21.09 (0.00%) 21.09 length=208,align1=13,align2=13: 21.09 (-3.85%) 21.09 (-3.85%) 20.31 length=224,align1=0,align2=0: 21.09 (-8.00%) 20.31 (-4.00%) 19.53 length=224,align1=14,align2=0: 23.44 (-11.11%) 20.31 (3.70%) 21.09 length=224,align1=0,align2=14: 21.09 (3.57%) 20.31 (7.14%) 21.88 length=224,align1=14,align2=14: 20.31 (0.00%) 19.53 (3.85%) 20.31 length=240,align1=0,align2=0: 20.31 (-4.00%) 19.53 (0.00%) 19.53 length=240,align1=15,align2=0: 22.66 (0.00%) 20.31 (10.34%) 22.66 length=240,align1=0,align2=15: 20.31 (-4.00%) 20.31 (-4.00%) 19.53 length=240,align1=15,align2=15: 21.88 (0.00%) 21.09 (3.57%) 21.88 length=272,align1=0,align2=0: 20.31 (0.00%) 28.12 (-38.46%) 20.31 length=272,align1=17,align2=0: 22.66 (0.00%) 27.34 (-20.69%) 22.66 length=272,align1=0,align2=17: 25.78 (-10.00%) 28.12 (-20.00%) 23.44 length=272,align1=17,align2=17: 22.66 (-3.57%) 27.34 (-25.00%) 21.88 length=288,align1=0,align2=0: 23.44 (-7.14%) 27.34 (-25.00%) 21.88 length=288,align1=18,align2=0: 22.66 (0.00%) 27.34 (-20.69%) 22.66 length=288,align1=0,align2=18: 23.44 (-3.45%) 25.00 (-10.35%) 22.66 length=288,align1=18,align2=18: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=304,align1=0,align2=0: 21.88 (0.00%) 21.88 (0.00%) 21.88 length=304,align1=19,align2=0: 23.44 (-3.45%) 22.66 (0.00%) 22.66 length=304,align1=0,align2=19: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=304,align1=19,align2=19: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=320,align1=0,align2=0: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=320,align1=20,align2=0: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=320,align1=0,align2=20: 22.66 (0.00%) 22.66 (0.00%) 22.66 length=320,align1=20,align2=20: 22.66 (-3.57%) 21.88 (0.00%) 21.88 length=336,align1=0,align2=0: 21.88 (0.00%) 24.22 (-10.71%) 21.88 length=336,align1=21,align2=0: 22.66 (0.00%) 25.00 (-10.35%) 22.66 length=336,align1=0,align2=21: 25.78 (0.00%) 25.00 (3.03%) 25.78 length=336,align1=21,align2=21: 25.00 (0.00%) 23.44 (6.25%) 25.00 length=352,align1=0,align2=0: 24.22 (0.00%) 24.22 (0.00%) 24.22 length=352,align1=22,align2=0: 25.00 (0.00%) 25.00 (0.00%) 25.00 length=352,align1=0,align2=22: 25.00 (-3.23%) 25.00 (-3.23%) 24.22 length=352,align1=22,align2=22: 25.00 (-3.23%) 24.22 (0.00%) 24.22 length=368,align1=0,align2=0: 25.00 (-3.23%) 23.44 (3.23%) 24.22 length=368,align1=23,align2=0: 25.00 (0.00%) 24.22 (3.12%) 25.00 length=368,align1=0,align2=23: 25.00 (-3.23%) 25.00 (-3.23%) 24.22 length=368,align1=23,align2=23: 25.00 (-6.67%) 23.44 (0.00%) 23.44 length=384,align1=0,align2=0: 24.22 (0.00%) 24.22 (0.00%) 24.22 length=384,align1=24,align2=0: 25.00 (0.00%) 24.22 (3.12%) 25.00 length=384,align1=0,align2=24: 25.00 (0.00%) 25.78 (-3.12%) 25.00 length=384,align1=24,align2=24: 24.22 (-3.33%) 23.44 (0.00%) 23.44 length=400,align1=0,align2=0: 25.00 (-3.23%) 26.56 (-9.68%) 24.22 length=400,align1=25,align2=0: 25.78 (-3.12%) 27.34 (-9.38%) 25.00 length=400,align1=0,align2=25: 27.34 (0.00%) 27.34 (0.00%) 27.34 length=400,align1=25,align2=25: 26.56 (0.00%) 25.78 (2.94%) 26.56 length=416,align1=0,align2=0: 26.56 (-3.03%) 25.78 (0.00%) 25.78 length=416,align1=26,align2=0: 28.12 (-2.86%) 27.34 (0.00%) 27.34 length=416,align1=0,align2=26: 27.34 (-2.94%) 28.12 (-5.88%) 26.56 length=416,align1=26,align2=26: 25.78 (0.00%) 26.56 (-3.03%) 25.78 length=432,align1=0,align2=0: 27.34 (-2.94%) 25.78 (2.94%) 26.56 length=432,align1=27,align2=0: 28.12 (-2.86%) 27.34 (0.00%) 27.34 length=432,align1=0,align2=27: 27.34 (0.00%) 28.12 (-2.86%) 27.34 length=432,align1=27,align2=27: 25.78 (0.00%) 25.78 (0.00%) 25.78 length=448,align1=0,align2=0: 26.56 (-3.03%) 25.78 (0.00%) 25.78 length=448,align1=28,align2=0: 27.34 (0.00%) 27.34 (0.00%) 27.34 length=448,align1=0,align2=28: 27.34 (0.00%) 28.12 (-2.86%) 27.34 length=448,align1=28,align2=28: 25.78 (0.00%) 25.78 (0.00%) 25.78 length=464,align1=0,align2=0: 25.78 (0.00%) 28.12 (-9.09%) 25.78 length=464,align1=29,align2=0: 28.12 (-2.86%) 29.69 (-8.57%) 27.34 length=464,align1=0,align2=29: 30.47 (0.00%) 30.47 (0.00%) 30.47 length=464,align1=29,align2=29: 28.12 (0.00%) 27.34 (2.78%) 28.12 length=480,align1=0,align2=0: 29.69 (-5.56%) 28.12 (0.00%) 28.12 length=480,align1=30,align2=0: 31.25 (-2.56%) 29.69 (2.56%) 30.47 length=480,align1=0,align2=30: 29.69 (0.00%) 30.47 (-2.63%) 29.69 length=480,align1=30,align2=30: 28.12 (0.00%) 28.12 (0.00%) 28.12 length=496,align1=0,align2=0: 28.12 (0.00%) 27.34 (2.78%) 28.12 length=496,align1=31,align2=0: 30.47 (-2.63%) 29.69 (0.00%) 29.69 length=496,align1=0,align2=31: 29.69 (0.00%) 30.47 (-2.63%) 29.69 length=496,align1=31,align2=31: 28.12 (-2.86%) 28.12 (-2.86%) 27.34 length=1024,align1=0,align2=0: 44.53 (0.00%) 44.53 (0.00%) 44.53 length=1024,align1=32,align2=0: 44.53 (-1.79%) 44.53 (-1.79%) 43.75 length=1024,align1=0,align2=32: 44.53 (-1.79%) 43.75 (0.00%) 43.75 length=1024,align1=32,align2=32: 43.75 (1.75%) 43.75 (1.75%) 44.53 length=1056,align1=0,align2=0: 46.88 (-1.69%) 46.88 (-1.69%) 46.09 length=1056,align1=33,align2=0: 53.12 (0.00%) 52.34 (1.47%) 53.12 length=1056,align1=0,align2=33: 52.34 (0.00%) 53.12 (-1.49%) 52.34 length=1056,align1=33,align2=33: 46.09 (0.00%) 46.88 (-1.69%) 46.09 length=1088,align1=0,align2=0: 46.88 (-1.69%) 46.09 (0.00%) 46.09 length=1088,align1=34,align2=0: 52.34 (0.00%) 52.34 (0.00%) 52.34 length=1088,align1=0,align2=34: 53.12 (-3.03%) 53.12 (-3.03%) 51.56 length=1088,align1=34,align2=34: 46.09 (0.00%) 46.88 (-1.69%) 46.09 length=1120,align1=0,align2=0: 49.22 (-1.61%) 48.44 (0.00%) 48.44 length=1120,align1=35,align2=0: 54.69 (1.41%) 55.47 (0.00%) 55.47 length=1120,align1=0,align2=35: 57.03 (0.00%) 55.47 (2.74%) 57.03 length=1120,align1=35,align2=35: 48.44 (0.00%) 49.22 (-1.61%) 48.44 length=1152,align1=0,align2=0: 47.66 (1.61%) 48.44 (0.00%) 48.44 length=1152,align1=36,align2=0: 55.47 (-1.43%) 55.47 (-1.43%) 54.69 length=1152,align1=0,align2=36: 58.59 (-1.35%) 55.47 (4.05%) 57.81 length=1152,align1=36,align2=36: 48.44 (0.00%) 49.22 (-1.61%) 48.44 length=1184,align1=0,align2=0: 53.12 (-3.03%) 50.78 (1.52%) 51.56 length=1184,align1=37,align2=0: 61.72 (-2.60%) 57.03 (5.19%) 60.16 length=1184,align1=0,align2=37: 62.50 (-1.27%) 57.03 (7.60%) 61.72 length=1184,align1=37,align2=37: 53.12 (-1.49%) 50.78 (2.99%) 52.34 length=1216,align1=0,align2=0: 53.91 (-4.55%) 50.78 (1.52%) 51.56 length=1216,align1=38,align2=0: 60.94 (0.00%) 57.03 (6.41%) 60.94 length=1216,align1=0,align2=38: 60.16 (0.00%) 57.81 (3.90%) 60.16 length=1216,align1=38,align2=38: 52.34 (-1.52%) 50.00 (3.03%) 51.56 length=1248,align1=0,align2=0: 54.69 (-2.94%) 53.12 (0.00%) 53.12 length=1248,align1=39,align2=0: 64.06 (-1.23%) 60.16 (4.94%) 63.28 length=1248,align1=0,align2=39: 60.94 (-2.63%) 60.16 (-1.32%) 59.38 length=1248,align1=39,align2=39: 53.12 (0.00%) 52.34 (1.47%) 53.12 length=1280,align1=0,align2=0: 52.34 (-1.52%) 52.34 (-1.52%) 51.56 length=1280,align1=40,align2=0: 61.72 (3.66%) 59.38 (7.32%) 64.06 length=1280,align1=0,align2=40: 60.94 (-2.63%) 60.16 (-1.32%) 59.38 length=1280,align1=40,align2=40: 52.34 (-1.52%) 52.34 (-1.52%) 51.56 length=1312,align1=0,align2=0: 54.69 (-1.45%) 55.47 (-2.90%) 53.91 length=1312,align1=41,align2=0: 63.28 (0.00%) 62.50 (1.23%) 63.28 length=1312,align1=0,align2=41: 62.50 (0.00%) 62.50 (0.00%) 62.50 length=1312,align1=41,align2=41: 53.91 (0.00%) 54.69 (-1.45%) 53.91 length=1344,align1=0,align2=0: 54.69 (0.00%) 54.69 (0.00%) 54.69 length=1344,align1=42,align2=0: 62.50 (0.00%) 62.50 (0.00%) 62.50 length=1344,align1=0,align2=42: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1344,align1=42,align2=42: 53.91 (0.00%) 53.91 (0.00%) 53.91 length=1376,align1=0,align2=0: 65.62 (-16.67%) 68.75 (-22.22%) 56.25 length=1376,align1=43,align2=0: 71.88 (-9.52%) 73.44 (-11.90%) 65.62 length=1376,align1=0,align2=43: 72.66 (-12.05%) 74.22 (-14.46%) 64.84 length=1376,align1=43,align2=43: 64.06 (-13.89%) 67.97 (-20.83%) 56.25 length=1408,align1=0,align2=0: 57.03 (-1.39%) 68.75 (-22.22%) 56.25 length=1408,align1=44,align2=0: 65.62 (-1.20%) 73.44 (-13.25%) 64.84 length=1408,align1=0,align2=44: 64.84 (0.00%) 74.22 (-14.46%) 64.84 length=1408,align1=44,align2=44: 56.25 (-1.41%) 68.75 (-23.94%) 55.47 length=1440,align1=0,align2=0: 67.97 (-14.47%) 64.84 (-9.21%) 59.38 length=1440,align1=45,align2=0: 74.22 (-10.47%) 68.75 (-2.33%) 67.19 length=1440,align1=0,align2=45: 72.66 (-6.90%) 69.53 (-2.30%) 67.97 length=1440,align1=45,align2=45: 65.62 (-13.51%) 58.59 (-1.35%) 57.81 length=1472,align1=0,align2=0: 66.41 (-14.86%) 58.59 (-1.35%) 57.81 length=1472,align1=46,align2=0: 73.44 (-9.30%) 67.19 (0.00%) 67.19 length=1472,align1=0,align2=46: 70.31 (-4.65%) 67.97 (-1.16%) 67.19 length=1472,align1=46,align2=46: 57.81 (0.00%) 58.59 (-1.35%) 57.81 length=1504,align1=0,align2=0: 60.94 (0.00%) 60.94 (0.00%) 60.94 length=1504,align1=47,align2=0: 71.09 (-1.11%) 70.31 (0.00%) 70.31 length=1504,align1=0,align2=47: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1504,align1=47,align2=47: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1536,align1=0,align2=0: 62.50 (-3.90%) 60.16 (0.00%) 60.16 length=1536,align1=48,align2=0: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1536,align1=0,align2=48: 61.72 (-3.95%) 60.16 (-1.32%) 59.38 length=1536,align1=48,align2=48: 60.94 (-1.30%) 60.16 (0.00%) 60.16 length=1568,align1=0,align2=0: 80.47 (-27.16%) 63.28 (0.00%) 63.28 length=1568,align1=49,align2=0: 86.72 (-18.09%) 72.66 (1.06%) 73.44 length=1568,align1=0,align2=49: 74.22 (-3.26%) 74.22 (-3.26%) 71.88 length=1568,align1=49,align2=49: 62.50 (0.00%) 61.72 (1.25%) 62.50 length=1600,align1=0,align2=0: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1600,align1=50,align2=0: 73.44 (0.00%) 71.88 (2.13%) 73.44 length=1600,align1=0,align2=50: 72.66 (0.00%) 73.44 (-1.08%) 72.66 length=1600,align1=50,align2=50: 62.50 (-1.27%) 62.50 (-1.27%) 61.72 length=1632,align1=0,align2=0: 64.84 (0.00%) 64.84 (0.00%) 64.84 length=1632,align1=51,align2=0: 75.78 (0.00%) 75.00 (1.03%) 75.78 length=1632,align1=0,align2=51: 78.91 (0.00%) 75.78 (3.96%) 78.91 length=1632,align1=51,align2=51: 64.84 (-2.47%) 64.84 (-2.47%) 63.28 length=1664,align1=0,align2=0: 64.84 (-1.22%) 64.84 (-1.22%) 64.06 length=1664,align1=52,align2=0: 75.78 (0.00%) 75.00 (1.03%) 75.78 length=1664,align1=0,align2=52: 80.47 (-0.98%) 75.78 (4.90%) 79.69 length=1664,align1=52,align2=52: 64.06 (-1.23%) 65.62 (-3.70%) 63.28 length=1696,align1=0,align2=0: 69.53 (-3.49%) 72.66 (-8.14%) 67.19 length=1696,align1=53,align2=0: 80.47 (-0.98%) 82.03 (-2.94%) 79.69 length=1696,align1=0,align2=53: 80.47 (0.96%) 82.03 (-0.96%) 81.25 length=1696,align1=53,align2=53: 68.75 (-2.33%) 72.66 (-8.14%) 67.19 length=1728,align1=0,align2=0: 67.97 (0.00%) 72.66 (-6.90%) 67.97 length=1728,align1=54,align2=0: 80.47 (-0.98%) 82.81 (-3.92%) 79.69 length=1728,align1=0,align2=54: 78.91 (-1.00%) 82.03 (-5.00%) 78.12 length=1728,align1=54,align2=54: 68.75 (0.00%) 72.66 (-5.68%) 68.75 length=1760,align1=0,align2=0: 77.34 (-12.50%) 68.75 (0.00%) 68.75 length=1760,align1=55,align2=0: 91.41 (-8.33%) 79.69 (5.56%) 84.38 length=1760,align1=0,align2=55: 88.28 (-10.78%) 80.47 (-0.98%) 79.69 length=1760,align1=55,align2=55: 77.34 (-11.24%) 68.75 (1.12%) 69.53 length=1792,align1=0,align2=0: 78.12 (-14.94%) 68.75 (-1.15%) 67.97 length=1792,align1=56,align2=0: 88.28 (-4.63%) 79.69 (5.56%) 84.38 length=1792,align1=0,align2=56: 88.28 (-9.71%) 80.47 (0.00%) 80.47 length=1792,align1=56,align2=56: 77.34 (-11.24%) 68.75 (1.12%) 69.53 length=1824,align1=0,align2=0: 72.66 (7.92%) 70.31 (10.89%) 78.91 length=1824,align1=57,align2=0: 85.94 (5.17%) 82.03 (9.48%) 90.62 length=1824,align1=0,align2=57: 82.03 (3.67%) 82.81 (2.75%) 85.16 length=1824,align1=57,align2=57: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1856,align1=0,align2=0: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1856,align1=58,align2=0: 83.59 (-0.94%) 82.03 (0.94%) 82.81 length=1856,align1=0,align2=58: 178.12 (-115.09%) 82.81 (0.00%) 82.81 length=1856,align1=58,align2=58: 70.31 (-1.12%) 70.31 (-1.12%) 69.53 length=1888,align1=0,align2=0: 73.44 (-1.08%) 78.91 (-8.60%) 72.66 length=1888,align1=59,align2=0: 85.94 (0.00%) 89.84 (-4.55%) 85.94 length=1888,align1=0,align2=59: 84.38 (0.00%) 89.06 (-5.56%) 84.38 length=1888,align1=59,align2=59: 72.66 (-1.09%) 78.12 (-8.70%) 71.88 length=1920,align1=0,align2=0: 72.66 (-1.09%) 78.12 (-8.70%) 71.88 length=1920,align1=60,align2=0: 85.94 (0.00%) 89.84 (-4.55%) 85.94 length=1920,align1=0,align2=60: 85.16 (0.00%) 89.06 (-4.59%) 85.16 length=1920,align1=60,align2=60: 72.66 (-1.09%) 78.91 (-9.78%) 71.88 length=1952,align1=0,align2=0: 75.00 (-1.05%) 75.00 (-1.05%) 74.22 length=1952,align1=61,align2=0: 88.28 (0.00%) 87.50 (0.88%) 88.28 length=1952,align1=0,align2=61: 87.50 (0.00%) 88.28 (-0.89%) 87.50 length=1952,align1=61,align2=61: 74.22 (0.00%) 74.22 (0.00%) 74.22 length=1984,align1=0,align2=0: 75.00 (-1.05%) 73.44 (1.05%) 74.22 length=1984,align1=62,align2=0: 89.06 (-0.89%) 87.50 (0.88%) 88.28 length=1984,align1=0,align2=62: 87.50 (0.00%) 88.28 (-0.89%) 87.50 length=1984,align1=62,align2=62: 74.22 (0.00%) 74.22 (0.00%) 74.22 length=2016,align1=0,align2=0: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=2016,align1=63,align2=0: 91.41 (-0.86%) 90.62 (0.00%) 90.62 length=2016,align1=0,align2=63: 89.84 (0.00%) 90.62 (-0.87%) 89.84 length=2016,align1=63,align2=63: 77.34 (-1.02%) 76.56 (0.00%) 76.56 length=4096,align1=0,align2=0: 141.41 (-0.56%) 146.88 (-4.44%) 140.62 Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: large ================================================================================ length=65543,align1=0,align2=0: 4018.75 (3.09%) 2634.38 (36.47%) 4146.88 length=65551,align1=0,align2=3: 4425.00 (-6.47%) 3134.38 (24.59%) 4156.25 length=65567,align1=3,align2=0: 2909.38 (29.95%) 3134.38 (24.53%) 4153.12 length=65599,align1=3,align2=5: 4415.62 (-6.16%) 3134.38 (24.64%) 4159.38 length=131079,align1=0,align2=0: 5765.62 (30.38%) 5240.62 (36.72%) 8281.25 length=131087,align1=0,align2=3: 8831.25 (-6.56%) 6271.88 (24.32%) 8287.50 length=131103,align1=3,align2=0: 5793.75 (29.05%) 6268.75 (23.23%) 8165.62 length=131135,align1=3,align2=5: 5806.25 (29.97%) 6259.38 (24.50%) 8290.62 length=262151,align1=0,align2=0: 11850.00 (28.91%) 10762.50 (35.43%) 16668.80 length=262159,align1=0,align2=3: 12043.80 (27.72%) 12700.00 (23.78%) 16662.50 length=262175,align1=3,align2=0: 12046.90 (27.90%) 12687.50 (24.07%) 16709.40 length=262207,align1=3,align2=5: 11984.40 (28.08%) 12678.10 (23.91%) 16662.50 length=524295,align1=0,align2=0: 24825.00 (25.00%) 24268.80 (27.34%) 33400.00 length=524303,align1=0,align2=3: 35731.20 (-6.53%) 25678.10 (23.44%) 33540.60 length=524319,align1=3,align2=0: 25893.80 (22.71%) 25725.00 (23.22%) 33503.10 length=524351,align1=3,align2=5: 25887.50 (22.86%) 25690.60 (23.45%) 33559.40 length=1048583,align1=0,align2=0: 50621.90 (0.30%) 50600.00 (0.34%) 50771.90 length=1048591,align1=0,align2=3: 53206.20 (0.54%) 51081.20 (4.51%) 53493.80 length=1048607,align1=3,align2=0: 53221.90 (0.32%) 51975.00 (2.66%) 53393.80 length=1048639,align1=3,align2=5: 53240.60 (0.36%) 51953.10 (2.77%) 53431.20 length=2097159,align1=0,align2=0: 103744.00 (-2.00%) 102447.00 (-1.00%) 102425.00 length=2097167,align1=0,align2=3: 108588.00 (-1.00%) 105159.00 (2.00%) 107606.00 length=2097183,align1=3,align2=0: 107678.00 (0.00%) 105250.00 (2.00%) 108125.00 length=2097215,align1=3,align2=5: 107906.00 (1.00%) 105841.00 (3.00%) 109475.00 length=4194311,align1=0,align2=0: 202994.00 (0.00%) 202500.00 (1.00%) 204809.00 length=4194319,align1=0,align2=3: 213350.00 (0.00%) 205997.00 (3.00%) 213384.00 length=4194335,align1=3,align2=0: 212653.00 (0.00%) 206444.00 (3.00%) 212900.00 length=4194367,align1=3,align2=5: 213044.00 (0.00%) 206084.00 (3.00%) 213847.00 length=8388615,align1=0,align2=0: 401294.00 (0.00%) 401231.00 (0.00%) 401944.00 length=8388623,align1=0,align2=3: 480872.00 (-14.00%) 406444.00 (3.00%) 422900.00 length=8388639,align1=3,align2=0: 422147.00 (0.00%) 407750.00 (3.00%) 422803.00 length=8388671,align1=3,align2=5: 442003.00 (-5.00%) 407125.00 (3.00%) 423509.00 length=16777223,align1=0,align2=0: 799809.00 (0.00%) 800000.00 (0.00%) 801756.00 length=16777231,align1=0,align2=3: 841184.00 (0.00%) 808525.00 (4.00%) 843775.00 length=16777247,align1=3,align2=0: 841166.00 (0.00%) 810147.00 (3.00%) 843147.00 length=16777279,align1=3,align2=5: 972569.00 (-16.00%) 808588.00 (4.00%) 843731.00 length=33554439,align1=0,align2=0: 1842240.00 (-0.01%) 1863590.00 (-1.17%) 1841990.00 length=33554447,align1=0,align2=3: 2103470.00 (-2.74%) 1919460.00 (6.25%) 2047440.00 length=33554463,align1=3,align2=0: 2075690.00 (-1.07%) 1930040.00 (6.02%) 2053720.00 length=33554495,align1=3,align2=5: 2110590.00 (-2.82%) 1924440.00 (6.25%) 2052650.00 Function: memcpy __memcpy_thunderx __memcpy_falkor __memcpy_generic Variant: random ================================================================================ max-size=4096: 44061.90 (5.85%) 38568.20 (17.59%) 46799.90 max-size=8192: 42790.90 (5.27%) 38158.90 (15.52%) 45171.50 max-size=16384: 44912.10 (2.25%) 38710.40 (15.75%) 45945.00 max-size=32768: 43577.90 (1.23%) 37975.10 (13.93%) 44120.00 max-size=65536: 44375.50 (1.04%) 38474.20 (14.20%) 44840.60 * manual/tunables.texi (Tunable glibc.tune.cpu): Add falkor. * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add memcpy_falkor. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (MAX_IFUNC): Bump. (__libc_ifunc_impl_list): Add __memcpy_falkor. * sysdeps/aarch64/multiarch/memcpy.c: Likewise. * sysdeps/aarch64/multiarch/memcpy_falkor.S: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list): Add falkor. * sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_FALKOR): New macro.
*	manual: Document getcontext uc_stack value on Linux [BZ #759]	Adhemerval Zanella	2017-08-08	1	-0/+5
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	As decribed in BZ#759, Linux getcontext implementation on Linux does differs from other SysV system about the returned uc_stack. This is true not only for i386, but for all the architecture I could actually check (aarch64, arm, alpha, hppa, m68k, mips, mips64, mips64n32, powerpc, powerpc64, powerpc64le, s390x, sh, sparc, sparc64, and x86). And I think we should not change current behavior for some reasons: 1. POSIX 2008 removed this SySV interface for a good reason and changing this behavior adds nothing for current portable code. POSIX 2001 specification does states that stack should be saved [1] and current GLIBC code does in a arch-specific manner (inside the mcontext_t) which allows the setcontext to work correctly. 2. Changing this behavior would potentially require compat symbols and I see no gain in adding compat symbols for deprecated interfaces. 3. Also, for comment #2 in BZ#759, it is up to kernel do setup the contents for ucontext_t and currently it does not provide the stack information as well. Trying to change it is also another fix that does not worth the possible gains. Instead my proposal is to make it clear the current interface may differ depending of the underlying operational system. glibc documentation and close this bug as invalid. [BZ #759] * manual/setjmp.texi (getcontex): Document uc_stack value on Linux. [1] http://pubs.opengroup.org/onlinepubs/009695399/functions/getcontext.html
*	Update contributors and latest gcc and binutils versions	Siddhesh Poyarekar	2017-08-02	2	-2/+30
\|
*	manual: Refactor documentation of CHAR_BIT.	Rical Jasan	2017-07-27	1	-6/+5
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This single-@item @table is better defined with @deftypevr, since the CHAR_BIT macro has @standards (being declared in a header), and @items in @tables are not considered annotatable. Using @deftypevr automatically includes the macro in the Variable and Constant Macro Index and ensures its inclusion the Summary of Library Facilities. @deftypevr is used to record the type of the macro so that it also appears in the Summary. The description is updated to mention a later POSIX requirement that this macro have the value 8. * manual/lang.texi (CHAR_BIT): Convert from an @table to an @deftypevr. Change standard from ISO to C90. Mention the POSIX.1-2001 requirement of the value 8.
*	manual: Complete @standards in creature.texi.	Rical Jasan	2017-07-27	1	-1/+1
\| \| \| \| \|	* manual/creature.texi (_REENTRANT): Annotate as obsolete. (_THREAD_SAFE): Likewise.
*	posix: Add p{read,write}v2 RWF_NOWAIT flag (BZ#21738)	Adhemerval Zanella	2017-07-11	1	-0/+4
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Linux 4.12 (b745fafaf70c0a98a2e1e7ac8cb14542889ceb0e) adds a new p{read,write}v2 flag RWF_NOWAIT. This patch adds it for linux uio-ext.h header. Checked on x86_64-linux-gnu (on a 4.10 kernel). [BZ #21738] * manual/llio.texi (RWF_NOWAIT): New item. * misc/tst-preadvwritev2-common.c (do_test_with_invalid_flags): Add RWF_NOWAIT check. * sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_NOWAIT): New flag.
*	* manual/tunables.texi: Add missing @end deftp.	DJ Delorie	2017-07-06	1	-0/+1
\|
*	Add per-thread cache to malloc	DJ Delorie	2017-07-06	3	-0/+57
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	* config.make.in: Enable experimental malloc option. * configure.ac: Likewise. * configure: Regenerate. * manual/install.texi: Document it. * INSTALL: Regenerate. * malloc/Makefile: Likewise. * malloc/malloc.c: Add per-thread cache (tcache). (tcache_put): New. (tcache_get): New. (tcache_thread_freeres): New. (tcache_init): New. (__libc_malloc): Use cached chunks if available. (__libc_free): Initialize tcache if needed. (__libc_realloc): Likewise. (__libc_calloc): Likewise. (_int_malloc): Prefill tcache when appropriate. (_int_free): Likewise. (do_set_tcache_max): New. (do_set_tcache_count): New. (do_set_tcache_unsorted_limit): New. * manual/probes.texi: Document new probes. * malloc/arena.c: Add new tcache tunables. * elf/dl-tunables.list: Likewise. * manual/tunables.texi: Document them. * NEWS: Mention the per-thread cache.
*	tunables, aarch64: New tunable to override cpu	Siddhesh Poyarekar	2017-06-30	1	-0/+8
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Add a new tunable (glibc.tune.cpu) to override CPU identification on aarch64. This is useful in two cases: one where it is desirable to pretend to be another CPU for purposes of testing or because routines written for that CPU are beneficial for specific workloads and second where the underlying kernel does not support emulation of MRS to get the MIDR of the CPU. * elf/dl-tunables.h (tunable_is_name): Move from... * elf/dl-tunables.c (is_name): ... here. (parse_tunables, __tunables_init): Adjust. * manual/tunables.texi: Document glibc.tune.cpu. * sysdeps/aarch64/dl-tunables.list: New file. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (struct cpu_list): New type. (cpu_list): New list of CPU names and their MIDR. (get_midr_from_mcpu): New function. (init_cpu_features): Override MIDR if necessary.
*	Require binutils 2.25 or later to build glibc.	Joseph Myers	2017-06-28	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch implements a requirement of binutils >= 2.25 (up from 2.22) to build glibc. Tests for 2.24 or later on x86_64 and s390 are removed. It was already the case, as indicated by buildbot results, that 2.24 was too old for building tests for 32-bit x86 (produced internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know if any configure tests for binutils features are obsolete given the increased version requirement. Tested for x86_64. * configure.ac (AS): Require binutils 2.25 or later. (LD): Likewise. * configure: Regenerated. * sysdeps/s390/configure.ac (AS): Remove version check. * sysdeps/s390/configure: Regenerated. * sysdeps/x86_64/configure.ac (AS): Remove version check. * sysdeps/x86_64/configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for binutils 2.25 or later. * INSTALL: Regenerated.
*	Add float128 support for ia64.	Joseph Myers	2017-06-26	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch enables float128 support for ia64, so that all the configurations where GCC supports _Float128 / __float128 as an ABI-distinct type now have glibc support as well. bits/floatn.h declares the support to be available for GCC 4.4 and later, which is when the libgcc support was added. The removal of sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c defines a function required by the float128 code. Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6 and GCC 7). Given how long it is since libm-test-ulps has been updated for ia64, I think truncating the file and regenerating it from scratch would be a good idea when doing a regeneration to add float128 ulps. I expect various ia64 libm issues (at least some already filed in Bugzilla) to result in test failures even after ulps regeneration, but hopefully the float128 code will pass tests as it's the same as used on other architectures. * sysdeps/ia64/Implies: Add ieee754/float128. * sysdeps/ia64/bits/floatn.h: New file. * sysdeps/ia64/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on ia64. * sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/ia64/fpu/e_sqrtf128.c: New file. * sysdeps/ia64/fpu/k_rem_pio2.c: Remove file. * sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc. * sysdeps/ia64/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define based on TEST_COND_binary128 for [__ia64__]. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
*	Add float128 support for x86_64, x86.	Joseph Myers	2017-06-26	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
*	powerpc64le: Enable float128	Paul E. Murphy	2017-06-26	1	-1/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This patch adds ULPs for the float128 type, updates the abilist for libc and libm, and adds the files bits/floatn.h and float128-abi.h, in order to enable the new type for powerpc64le. This patch also adds the implementation of sqrtf128 for powerpc64le, since it is not implemented in libgcc. The sfp-machine.h header is taken from libgcc. Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x. * manual/math.texi (Mathematics): Mention the enabling of float128 for powerpc64le. * sysdeps/powerpc/bits/floatn.h: New file. * sysdeps/powerpc/fpu/libm-test-ulps: Regenerated. * sysdeps/powerpc/fpu/math_private.h: (__ieee754_sqrtf128): New inline override. * sysdeps/powerpc/powerpc64le/Implies-before: New file. * sysdeps/powerpc/powerpc64le/Makefile: New file. * sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file. * sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file. * sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Updated. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h: New file.
*	powerpc64le: Check for compiler features for float128	Gabriel F. T. Gomes	2017-06-26	1	-0/+4
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	On powerpc64le, support for float128 will be enabled, which requires some compiler features to be present. This patch adds a configure test to check for such features, which are provided for powerpc64le since GCC 6.2. Tested for powerpc64 and powerpc64le. * INSTALL: Regenerate. * manual/install.texi (Recommended Tools for Compilation): Mention the powerpc64le-specific requirement in the manual. * sysdeps/powerpc/powerpc64le/configure.ac: New file with checks for the compiler features required for building float128. * sysdeps/powerpc/powerpc64le/configure: New, auto-generated file.
*	manual: Fix a minor grammatical error.	Rical Jasan	2017-06-25	1	-1/+1
\| \| \| \|	* manual/math.texi: Fix a grammatical error.