about summary refs log tree commit diff
path: root/manual/libm-err-tab.pl
Commit message (Collapse)AuthorAgeFilesLines
* Do not hardcode list of libm functions in libm-err-tab.pl.Joseph Myers2017-02-061-25/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | manual/libm-err-tab.pl contains a hardcoded list of libm functions for which ulps are listed in the manual, and another hardcoded list in a comment of functions deliberately excluded because of an expected lack of ulps (and the two together are not in fact an exhaustive list of libm functions tested through the libm-test machinery). This patch removes these hardcoded lists, so eliminating this from the places needing updating when a new libm function is added. Instead, ulps are tabulated for functions for which they are seen in libm-test-ulps files, in alphabetical order. The pseudo-function names such as *_downward and *_vlen* are excluded since they are excluded from the existing lists, and the description in the manual is updated to explain how those entries are excluded and if a function is not listed at all it does not have known errors. Tested for x86_64. * manual/libm-err-tab.pl (@all_functions): Change to %all_functions. Initialize as empty. (parse_ulps): Add to %all_functions based on functions found in ulps files. Ignore results for non-default rounding modes and vector functions. (print_platforms): Use %all_platforms. * manual/math.texi (Errors in Math Functions): Document omissions from the table.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Add fromfp functions.Joseph Myers2016-12-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add roundeven, roundevenf, roundevenl.Joseph Myers2016-12-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add fmaxmag, fminmag functions.Joseph Myers2016-12-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines fmaxmag and fminmag functions that return the argument with maximum / minimum magnitude (acting like fmax / fmin if the arguments have the same magnitude or either argument is a NaN). These correspond to the IEEE 754-2008 operations maxNumMag and minNumMag. This patch implements these functions for glibc. They are implemented with type-generic templates. Tests are based on those for fmax and fmin. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New declaration. (fminmag): Likewise. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise. * math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25. (fmaxmagf): Likewise. (fmaxmagl): Likewise. (fminmag): Likewise. (fminmagf): Likewise. (fminmagl): Likewise. * math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF. * math/s_fmaxmag_template.c: New file. * math/s_fminmag_template.c: Likewise. * math/libm-test.inc (fmaxmag_test_data): New array. (fmaxmag_test): New function. (fminmag_test_data): New array. (fminmag_test): New function. (main): Call fmaxmag_test and fminmag_test. * math/test-tgmath.c (NCALLS): Increase to 132. (F(compile_test)): Call fmaxmag and fminmag. (F(fminmag)): New function. (F(fmaxmag)): Likewise. * manual/arith.texi (Misc FP Arithmetic): Document fminmag, fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl. * manual/libm-err-tab.pl (@all_functions): Add fmaxmag and fminmag. * sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag and fminmag. (CFLAGS-nldbl-fmaxmag.c): New variable. (CFLAGS-nldbl-fminmag.c): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add llogb, llogbf, llogbl.Joseph Myers2016-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines llogb functions that are like ilogb except that they return long int instead of int. Corresponding FP_LLOGB* macros are defined, whose values are required to have the obvious correspondence to those of the FP_ILOGB* macros. This patch implements these functions and macros for glibc. llogb uses the type-generic infrastructure, with an implementation similar to the wrapper for ilogb but with additional conversion from FP_ILOGB* to FP_LLOGB*; this approach avoids needing to modify or duplicate any of the architecture-specific ilogb implementations. Tests are also based on those for ilogb. Ideally the llogb functions would alias the ilogb ones when long is 32-bit, but such aliasing requires the associated header declarations of the different-type alias to be hidden, typically by defining macros before including the header (see e.g. how sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to __hidden_lround before including <math.h>). The infrastructure for type-generic function implementations does not support defining such macros at present (since C code can't define a macro whose name is determined by other macros). So this patch leaves them as separate functions (similar to e.g. scalbln and scalbn being separate in such a case as well), but with the remapping of FP_ILOGB* to FP_LLOGB* conditioned out in the case where it would be the identity map. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New macro. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise. * math/Versions (llogb): New libm symbol at version GLIBC_2.25. (llogbf): Likewise. (llogbl): Likewise. * math/Makefile (gen-libm-calls): Add w_llogbF. (tests): Add test-fp-llogb-constants. * math/w_llogb_template.c: New file. Based on math/w_ilogb_template.c. * math/libm-test.inc (llogb_test_data): New array. (llogb_test): New function. (main): Call llogb_test. * math/test-fp-llogb-constants.c: New file. Based on math/test-fp-ilogb-constants.c. * math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call. (do_test): Call check_return_llogb. * math/test-tgmath.c (NCALLS): Increase to 126. (F(compile_test)): Call llogb. (F(llogb)): New function. * manual/math.texi (Exponents and Logarithms): Document llogb, llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN. * manual/libm-err-tab.pl (@all_functions): Add llogb. * sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file. * sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb. (CFLAGS-nldbl-llogb.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add setpayloadsig, setpayloadsigf, setpayloadsigl.Joseph Myers2016-11-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add setpayload, setpayloadf, setpayloadl.Joseph Myers2016-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).Joseph Myers2016-11-041-30/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
* Add canonicalize, canonicalizef, canonicalizel.Joseph Myers2016-10-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add getpayload, getpayloadf, getpayloadl.Joseph Myers2016-10-191-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add totalordermag, totalordermagf, totalordermagl.Joseph Myers2016-10-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add totalorder, totalorderf, totalorderl.Joseph Myers2016-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add iseqsig.Joseph Myers2016-10-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add iscanonical.Joseph Myers2016-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iscanonical classification macro to <math.h>. The motivation for this is decimal floating-point, where some values have both canonical and noncanonical encodings. For IEEE binary interchange formats, all encodings are canonical. For x86/m68k ldbl-96, and for ldbl-128ibm, there are encodings that do not represent any valid value of the type; although formally iscanonical does not need to handle trap representations (and so could just always return 1), it seems useful, and in line with the description in the TS of "representations that are extraneous to the floating-point model" as being non-canonical (as well as "redundant representations of some or all of its values"), for it to detect those representations and return 0 for them. This patch adds iscanonical to glibc. It goes in a header <bits/iscanonical.h>, included under appropriate conditions in <math.h>. The default header version just evaluates the argument (converted to its semantic type, though current GCC will probably discard that conversion and any exceptions resulting from it) and returns 1. ldbl-96 and ldbl-128ibm then have versions of the header that call a function __iscanonicall for long double (the sizeof-based tests will of course need updating for float128 support, like other such type-generic macro implementations). The ldbl-96 version of __iscanonicall has appropriate conditionals to reflect the differences in the m68k version of that format (where the high mantissa bit may be either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests for those formats are added as well. Other architectures do not have any new functions added because just returning 1 is correct for all their floating-point formats. Tested for x86_64, x86, mips64 (to test the default macro version) and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include <bits/iscanonical.h>. * bits/iscanonical.h: New file. * math/s_iscanonicall.c: Likewise. * math/Versions (__iscanonicall): New libm symbol at version GLIBC_2.25. * math/libm-test.inc (iscanonical_test_data): New array. (iscanonical_test): New function. (main): Call iscanonical_test. * math/Makefile (headers): Add bits/iscanonical.h. (type-ldouble-routines): Add s_iscanonicall. * manual/arith.texi (Floating Point Classes): Document iscanonical. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add test-iscanonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise. * sysdeps/ieee754/ldbl-96/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add iszero.Joseph Myers2016-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iszero classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify when sNaN support is required and a direct comparison otherwise; any optimizations for this macro should be done through adding __builtin_iszero in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New macro. * math/libm-test.inc (iszero_test_data): New array. (iszero_test): New function. (main): Call iszero_test. * manual/arith.texi (Floating Point Classes): Document iszero. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
* Add issubnormal.Joseph Myers2016-09-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an issubnormal classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify; any optimizations for this macro should be done through adding __builtin_subnormal in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. The intended structure of the NEWS entry for <math.h> features from TS 18661-1 is like: * New <math.h> features are added from TS 18661-1:2014: - Nearest integer functions: roundeven, roundevenf, roundevenl. - Comparison macros: iseqsig. - Classification macros: iscanonical, issubnormal, iszero. (that is, following the grouping of interfaces in TS 18661-1:2014, with any group where any interfaces are new in glibc 2.25 being listed like that). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New macro. * math/libm-test.inc (issubnormal_test_data): New array. (issubnormal_test): New function. * manual/arith.texi (Floating Point Classes): Document issubnormal. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
* Add nextup and nextdown math functionsRajalakshmi Srinivasaraghavan2016-06-161-3/+3
| | | | | | | | | | | TS 18661 adds nextup and nextdown functions alongside nextafter to provide support for float128 equivalent to it. This patch adds nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf to libm before float128 support. The nextup functions return the next representable value in the direction of positive infinity and the nextdown functions return the next representable value in the direction of negative infinity. These are currently enabled as GNU extensions.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Don't include individual test ulps in libm-test-ulps.Joseph Myers2014-03-051-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As recently discussed <https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it doesn't seem particularly useful for libm-test-ulps files to contain huge amounts of data on ulps for individual tests; just the global maximum observed ulps for each function, together with the verification of exceptions, errno and special results such as infinities and NaNs for each test, suffices to verify that a function's behavior on the given test inputs is within the expected accuracy. Removing this data reduces source tree churn caused by updates to these files when libm tests are added, and reduces the frequency with which testsuite additions actually need libm-test-ulps changes at all. Accordingly, this patch removes that data, so that individual tests get checked against the global bounds for the given function and only generate an error if those are exceeded. Tested x86_64 (including verifying that if an ulps value is artificially reduced, the tests do indeed fail as they should and "make regen-ulps" generates the expected changes). * math/libm-test.inc (struct ulp_data): Don't refer to ulps for individual tests in comment. (libm-test-ulps.h): Don't refer to test_ulps in #include comment. (prev_max_error): New variable. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (compare_ulp_data): Don't refer to test names in comment. (find_test_ulps): Remove function. (find_function_ulps): Likewise. (find_complex_function_ulps): Likewise. (init_max_error): Take function name as argument. Look up ulps for that function. (print_ulps): Remove function. (print_max_error): Use prev_max_error instead of calling find_function_ulps. (print_complex_max_error): Use prev_real_max_error and prev_imag_max_error instead of calling find_complex_function_ulps. (check_float_internal): Take max_ulp parameter instead of calling find_test_ulps. Don't call print_ulps. (check_float): Update call to check_float_internal. (check_complex): Update calls to check_float_internal. (START): Pass argument to init_max_error. * math/gen-libm-test.pl (%results): Don't include "kind" information. (parse_ulps): Don't handle ulps of individual tests. (print_ulps_file): Likewise. (output_ulps): Likewise. * math/README.libm-test: Update. * manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of individual tests. * sysdeps/aarch64/libm-test-ulps: Remove individual test ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/ia64/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-011-1/+1
|
* Remove trailing whitespace.Joseph Myers2013-06-051-1/+1
|
* New <math.h> macro named issignaling to check for a signaling NaN (sNaN).Thomas Schwinge2013-04-021-1/+3
| | | | It is based on draft TS 18661 and currently enabled as a GNU extension.
* Update copyright notices with scripts/update-copyrights.Joseph Myers2013-01-021-1/+1
|
* Replace FSF snail mail address with URLs.Paul Eggert2012-02-091-3/+2
|
* * manual/libc-texinfo.sh: Add entry about free manuals.Andreas Jaeger2001-08-281-10/+43
| | | | | | | | | | | | | | | | | | * manual/contrib.texi (Contributors): Fix cross reference. * manual/libc.texinfo (Copying): Include freemanuals. * manual/Makefile (appendices): Add freemanuals. * manual/freemanuals.texi: New file. Patch by Brian Youmans <3diff@gnu.org>. * manual/libm-err-tab.pl: Pretty print more platforms, print a smaller table. * manual/math.texi (Errors in Math Functions): Fix grammar, start table on separate page. Patch by Brian Youmans <3diff@gnu.org>.
* Update to LGPL v2.1.Andreas Jaeger2001-07-061-9/+8
| | | | | | | | | | | | | | 2001-07-06 Paul Eggert <eggert@twinsun.com> * manual/argp.texi: Remove ignored LGPL copyright notice; it's not appropriate for documentation anyway. * manual/libc-texinfo.sh: "Library General Public License" -> "Lesser General Public License". 2001-07-06 Andreas Jaeger <aj@suse.de> * All files under GPL/LGPL version 2: Place under LGPL version 2.1.
* Update.Andreas Jaeger2001-06-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | 2001-06-05 Andreas Jaeger <aj@suse.de> * manual/libm-err-tab.pl (parse_ulps): Fix typo. 2001-06-04 H.J. Lu <hjl@gnu.org> * sysdeps/alpha/elf/start.S: Add .type for the entry point. * sysdeps/arm/elf/start.S: Likewise. * sysdeps/hppa/elf/start.S: Likewise. * sysdeps/i386/elf/start.S: Likewise. * sysdeps/m68k/elf/start.S: Likewise. * sysdeps/mips/elf/start.S: Likewise. * sysdeps/ia64/elf/start.S: Likewise. * sysdeps/sh/elf/start.S: Likewise. * sysdeps/s390/s390-32/elf/start.S: Likewise. * sysdeps/s390/s390-64/elf/start.S: Likewise. * sysdeps/cris/elf/start.S: Likewise. 2001-06-04 Bruce Mitchener <bruce@cubik.org> * manual/resource.texi: Correct setpriority/nice documentation. * sysdeps/unix/nice.c: Correct nice() implementation.
* Update.Ulrich Drepper1999-10-301-0/+207
* manual/math.texi (Errors in Math Functions): New section. * math/libm-err-tab.pl: Moved to... * manual/libm-err-tab.pl: ...here. * manual/Makefile: Add rules for math function error table generation.