about summary refs log tree commit diff
path: root/iconvdata
Commit message (Collapse)AuthorAgeFilesLines
* CVE-2014-6040: Crashes on invalid input in IBM gconv modules [BZ #17325]Florian Weimer2014-09-039-9/+31
| | | | | These changes are based on the fix for BZ #14134 in commit 6e230d11837f3ae7b375ea69d7905f0d18eb79e5.
* Use $(rtld-prefix) more consistently.Joseph Myers2014-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The glibc makefiles have a standard variable, $(rtld-prefix), to run the dynamic linker with a default --library-path option; this is used as the basis of lots of other variables for running programs compiled with the newly built library. A few places however use $(elf-objpfx)ld.so or $(elf-objpfx)${rtld-installed-name} directly, with such a --library-path option. This patch makes such places use $(rtld-prefix) instead. I'm not aware of any significance in these cases to the choice of ld.so or ${rtld-installed-name} when running the dynamic linker, or to whether $(patsubst %,:%,$(sysdep-library-path)) is included in the library-path as it is in $(rtld-prefix) and just one of the places being changed. Tested x86_64. * elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix). * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. localedata/ChangeLog: * Makefile (LOCALEDEF): Use $(rtld-prefix).
* Remove redundant C locale settings.Joseph Myers2014-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
* Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers2014-06-063-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
* Include LOCPATH in default test environment.Joseph Myers2014-06-041-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
* Consistently use $(elf-objpfx).Joseph Myers2014-05-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As previously noted <https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>, $(elf-objpfx) and $(elfobjdir) are redundant and should be consolidated. This patch consolidates on $(elf-objpfx) (for consistency with $(csu-objpfx)), also changing direct uses of $(common-objpfx)elf/ to use $(elf-objpfx). Tested x86_64, including that installed shared libraries are unchanged by the patch. * Makeconfig [$(build-hardcoded-path-in-tests) = yes] (rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of $(common-objpfx)elf/. (link-libc-before-gnulib): Likewise. (elfobjdir): Remove variable. * Makefile (install): Use $(elf-objpfx) instead of $(common-objpfx)elf/. * Makerules (link-libc-args): Use $(elf-objpfx) instead of $(elfobjdir)/. (link-libc-deps): Likewise. ($(common-objpfx)libc.so): Likewise. ($(common-objpfx)linkobj/libc.so): Likewise. [$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx) instead of $(common-objpfx)elf/. (symbolic-link-list): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. * sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of $(elfobjdir)/. (static-gnulib-arch): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Use $(elf-objpfx) instead of $(common-objpfx)elf/. localedata/ChangeLog: * Makefile (LOCALEDEF): Use $(elf-objpfx) instead of $(common-objpfx)elf/.
* 2014-05-01 Steve Ellcey <sellcey@mips.com>Steve Ellcey2014-05-0146-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * iconvdata/ansi_x3.110.c (ONE_DIRECTION): Define. * iconvdata/armscii-8.c (ONE_DIRECTION): Define. * iconvdata/big5.c (ONE_DIRECTION): Define. * iconvdata/big5hkscs.c (ONE_DIRECTION): Define. * iconvdata/cp1255.c (ONE_DIRECTION): Define. * iconvdata/cp1258.c (ONE_DIRECTION): Define. * iconvdata/cp932.c (ONE_DIRECTION): Define. * iconvdata/euc-cn.c (ONE_DIRECTION): Define. * iconvdata/euc-jisx0213.c (ONE_DIRECTION): Define. * iconvdata/euc-jp-ms.c (ONE_DIRECTION): Define. * iconvdata/euc-jp.c (ONE_DIRECTION): Define. * iconvdata/euc-kr.c (ONE_DIRECTION): Define. * iconvdata/euc-tw.c (ONE_DIRECTION): Define. * iconvdata/gb18030.c (ONE_DIRECTION): Define. * iconvdata/gbbig5.c (ONE_DIRECTION): Define. * iconvdata/gbgbk.c (ONE_DIRECTION): Define. * iconvdata/gbk.c (ONE_DIRECTION): Define. * iconvdata/ibm1364.c (ONE_DIRECTION): Define. * iconvdata/ibm930.c (ONE_DIRECTION): Define. * iconvdata/ibm932.c (ONE_DIRECTION): Define. * iconvdata/ibm933.c (ONE_DIRECTION): Define. * iconvdata/ibm935.c (ONE_DIRECTION): Define. * iconvdata/ibm937.c (ONE_DIRECTION): Define. * iconvdata/ibm939.c (ONE_DIRECTION): Define. * iconvdata/ibm943.c (ONE_DIRECTION): Define. * iconvdata/iso-2022-cn-ext.c (ONE_DIRECTION): Define. * iconvdata/iso-2022-cn.c (ONE_DIRECTION): Define. * iconvdata/iso-2022-jp-3.c (ONE_DIRECTION): Define. * iconvdata/iso-2022-jp.c (ONE_DIRECTION): Define. * iconvdata/iso-2022-kr.c (ONE_DIRECTION): Define. * iconvdata/iso646.c (ONE_DIRECTION): Define. * iconvdata/iso8859-1.c (ONE_DIRECTION): Define. * iconvdata/iso_11548-1.c (ONE_DIRECTION): Define. * iconvdata/iso_6937-2.c (ONE_DIRECTION): Define. * iconvdata/iso_6937.c (ONE_DIRECTION): Define. * iconvdata/johab.c (ONE_DIRECTION): Define. * iconvdata/shift_jisx0213.c (ONE_DIRECTION): Define. * iconvdata/sjis.c (ONE_DIRECTION): Define. * iconvdata/t.61.c (ONE_DIRECTION): Define. * iconvdata/tcvn5712-1.c (ONE_DIRECTION): Define. * iconvdata/tscii.c (ONE_DIRECTION): Define. * iconvdata/uhc.c (ONE_DIRECTION): Define. * iconvdata/unicode.c (ONE_DIRECTION): Define. * iconvdata/utf-16.c (ONE_DIRECTION): Define. * iconvdata/utf-32.c (ONE_DIRECTION): Define. * iconvdata/utf-7.c (ONE_DIRECTION): Define.
* 2014-05-01 Steve Ellcey <sellcey@mips.com>Steve Ellcey2014-05-012-0/+2
| | | | | | | * intl/iconv/skeleton.c (ONE_DIRECTION): Remove define. * iconv/gconv_simple.c (ONE_DIRECTION): Define. * iconvdata/8bit-gap.c (ONE_DIRECTION): Ditto. * iconvdata/8bit-generic.c (ONE_DIRECTION): Ditto.
* Make tests consistently use *.out output files.Joseph Myers2014-03-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
* Enumerate tests with special rules in tests-special variable.Joseph Myers2014-03-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
* Fix fallout from Joseph's untested Makeconfig change.Roland McGrath2014-02-281-4/+4
|
* Consistently include Makeconfig after defining subdir.Joseph Myers2014-02-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
* Generate .test-result files for tests with special rules.Joseph Myers2014-02-211-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
* Use glibc_likely instead __builtin_expect.Ondřej Bílka2014-02-1045-266/+266
|
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-01346-346/+346
|
* Fix typos.Ondřej Bílka2013-08-302-2/+2
|
* Update BIG5-HKSCS charmap to HKSCS-2008Andreas Schwab2013-06-115-11250/+12390
|
* Remove trailing whitespace.Joseph Myers2013-06-051-128/+128
|
* Link extra-libs consistently with libc and ld.so.Joseph Myers2013-05-311-8/+1
|
* Add #include <stdint.h> for uint[32|64]_t usage (except installed headers).Ryan S. Arnold2013-05-1659-0/+117
|
* Add --enable-hardcoded-path-in-tests configure optionH.J. Lu2013-01-113-6/+6
|
* Revert "Update BIG5-HKSCS charmap to HKSCS-2008"Andreas Schwab2013-01-105-12368/+11250
| | | | This reverts commit e79f00ebb776ad35ec6a9a4c89bc8046052674f0.
* Update BIG5-HKSCS charmap to HKSCS-2008Andreas Schwab2013-01-105-11250/+12368
| | | | | | | | | | | | | | | | | | | | | | | | [BZ #14991] * charmaps/BIG5-HKSCS: Update to HKSCS-2008. [BZ #14991] * iconvdata/big5hkscs.c (big5hkscs_to_ucs, from_ucs4) (from_ucs4_idx): Regenerate. (MIN_NEEDED_FROM, MAX_NEEDED_FROM, MIN_NEEDED_TO): Remove macros. (FROM_LOOP_MIN_NEEDED_FROM, FROM_LOOP_MAX_NEEDED_FROM) (FROM_LOOP_MIN_NEEDED_TO, FROM_LOOP_MAX_NEEDED_TO) (TO_LOOP_MIN_NEEDED_FROM, TO_LOOP_MAX_NEEDED_FROM) (TO_LOOP_MIN_NEEDED_TO, TO_LOOP_MAX_NEEDED_TO, PREPARE_LOOP) (EXTRA_LOOP_ARGS, SAVE_RESET_STATE, EMIT_SHIFT_TO_INIT) (EXTRA_LOOP_DECLS, MAX_NEEDED_OUTPUT): New macros. (MIN_NEEDED_INPUT, MAX_NEEDED_INPUT, MIN_NEEDED_OUTPUT): Define from FROM_LOOP and TO_LOOP specific macros. (BODY): Handle combining characters. * iconvdata/BIG5HKSCS.irreversible: Update. * iconvdata/BIG5HKSCS.precomposed: New file. * iconvdata/testdata/BIG5HKSCS: Add all characters from range 0x8740 - 0x87DF. * iconvdata/testdata/BIG5HKSCS..UTF8: Update.
* Update copyright notices with scripts/update-copyrights.Joseph Myers2013-01-02346-352/+346
|
* Fix printf format mismatchesAndreas Schwab2012-11-022-2/+2
|
* Remove ${SHELL} from tst-table.sh/tst-tables.shH.J. Lu2012-10-262-2/+2
|
* Support cross-testing.Joseph Myers2012-10-242-1/+3
|
* Define and use $(run-built-tests).Joseph Myers2012-10-241-1/+1
|
* Don't pass shell loops' stdin to programs run on glibc's host.Jim Blandy2012-10-222-7/+7
|
* Use $(run-program-prefix) in more shell script tests.Joseph Myers2012-10-193-8/+12
|
* Set "fail on error" mode directly in testsuite shell scriptsDmitry V. Levin2012-09-252-4/+5
|
* Fix validation check when converting from ibm930 to utfSiddhesh Poyarekar2012-06-061-2/+3
| | | | | | | | | | | [BZ #14134] When converting IBM930 code with iconv(), if IBM930 code which includes invalid multibyte character "0xffff" is specified, then iconv() segfaults. This is easy to see using the following command: echo '0x0e 0x43 0x8c 0xff 0xff 0x43 0xbd 0x43 0xbd' | xxd -r | iconv -f IBM930 -t UTF-8
* [BZ #13691], Revert breakage of iconv() converter for TCVN-5712.Andreas Jaeger2012-05-211-3/+2
| | | | | | | | | | | | | | | | | | * iconvdata/tcvn5712-1.c (BODY for FROM_LOOP): Don't consider inptr and inend for must_buffer_ch. * wcsmbs/tst-mbsnrtowcs.c: Remove file. * wcsmbs/Makefile (tests): Remove tst-mbsnrtowcs. * stdio-common/Makefile (tests): Remove bug15. (bug15-ENV): Remove macro. * stdio-common/bug15.c: Remove, we do not support vi_VN.TCVN5712-1 anymore. localedata: * SUPPORTED: Remove vi_VN.TCVN/TCVN5712-1. * tst-strptime.c: Remove, we do not support vi_VN.TCVN5712-1 anymore. * Makefile (LOCALES): Remove vi_VN.TCVN5712-1 from list. (tests): Remove tst-strptime.
* Complete GB18030 charmapAndreas Schwab2012-05-111-2554/+8657
|
* Fix bug in previous tcvn5712 commit e64d2de52.Tulio Magno Quites Machado Filho2012-04-021-2/+3
| | | | | | [BZ #13691] * iconvdata/tcvn5712-1.c (FROM_LOOP): Test end of input using inptr and inend, rather than using last_ch.
* Fix a bug when converting strings with 1 character using TCVN5712-1Tulio Magno Quites Machado Filho2012-03-301-2/+2
| | | | | | | | | | | It isn't necessary to buffer the last character of strings. This can cause a bug with strings that have 1 character between 0x0041 and 0x01b0. [BZ #13691] * iconvdata/tcvn5712-1.c (FROM_LOOP): Fix a bug when converting strings with only 1 character between 0x0041 and 0x01b0. * wcsmbs/Makefile (tests): Add tst-mbsnrtowcs. * wcsmbs/tst-mbsnrtowcs.c: New file.
* Remove distribute variable from MakefilesUlrich Drepper2012-03-071-78/+1
|
* Replace FSF snail mail address with URLs.Paul Eggert2012-02-09346-1041/+692
|
* iconv mapping of 0xA8 0xEC in CP1258 is non-canonicalBruno Haible2011-12-231-2/+1
|
* iconv mapping of U+0385 in TCVN5712-1 is incorrectBruno Haible2011-12-231-5/+4
|
* Store invocation-specific data of conversion modules in __gconv_step_dataUlrich Drepper2011-12-213-43/+43
|
* Remove handling of VCs other then gitUlrich Drepper2011-11-171-1/+1
|
* iconvdata/johab.c: Don't inline unlikely called functionUlrich Drepper2011-07-061-4/+4
|
* Consolidate shlib.lds references in new variables.Roland McGrath2011-07-021-1/+1
|
* Fix crash in GB18030 encoderAndreas Schwab2011-06-281-6/+6
|
* Add test for last iconv bugUlrich Drepper2011-05-272-1/+69
|
* Fix conversion to ISO-2022-JP-2 with ISO-8859-7 designationAndreas Schwab2011-05-271-6/+6
|
* Fix CP1258 conversionUlrich Drepper2011-05-212-10/+10
| | | | a5 ec was mishandled and the other direction appropriately so, too.
* Update GB18030 to 2005 versionUlrich Drepper2011-05-171-18052/+10464
|
* Fix handling of conversion problem in CP932 moduleUlrich Drepper2011-05-143-40/+81
|
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 22:55:35 +0000