about summary refs log tree commit diff
path: root/elf
Commit message (Collapse)AuthorAgeFilesLines
* elf: Use nocancel pread64() instead of lseek()+read()Leandro Pereira2019-10-181-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Transforms this, when linking in a shared object: openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3"..., 832) = 832 lseek(3, 792, SEEK_SET) = 792 read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68 fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0 lseek(3, 792, SEEK_SET) = 792 read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68 lseek(3, 864, SEEK_SET) = 864 read(3, "\4\0\0\0\20\0\0\0"..., 32) = 32 Into this: openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3"..., 832) = 832 pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68 fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0 pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68 pread(3, "\4\0\0\0\20\0\0\0"..., 32, 864) = 32 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Rename and split elf/tst-dlopen-aout collection of testsFlorian Weimer2019-10-178-24/+177
| | | | | | | | | | | | | | | From the beginning, elf/tst-dlopen-aout has exercised two different bugs: (a) failure to report errors for a dlopen of the executable itself in some cases (bug 24900) and (b) incorrect rollback of the TLS modid allocation in case of a dlopen failure (bug 16634). This commit replaces the test with elf/tst-dlopen-self for (a) and elf/tst-dlopen-tlsmodid for (b). The latter tests use the elf/tst-dlopen-self binaries (or iconv) with dlopen, so they are no longer self-dlopen tests. Tested on x86_64-linux-gnu and i686-linux-gnu, with a toolchain that does not default to PIE.
* ldconfig: handle .dynstr located in separate segment (bug 25087)Andreas Schwab2019-10-161-13/+23
| | | | | | To determine the load offset of the DT_STRTAB section search for the segment containing it, instead of using the load offset of the first segment.
* ldd: Print "not a dynamic executable" on standard error [BZ #24150]Florian Weimer2019-10-151-1/+1
| | | | | | Tested with the testsuite on x86_64-linux-gnu, and manually. Reviewed-By: Richard W.M. Jones <rjones@redhat.com>
* Simplify note processingAndreas Schwab2019-10-101-14/+3
| | | | This removes dead code during note processing.
* elf: Assign TLS modid later during dlopen [BZ #24930]Florian Weimer2019-10-043-30/+48
| | | | | | | | | | | | | | Commit a42faf59d6d9f82e5293a9ebcc26d9c9e562b12b ("Fix BZ #16634.") attempted to fix a TLS modid consistency issue by adding additional checks to the open_verify function. However, this is fragile because open_verify cannot reliably predict whether _dl_map_object_from_fd will later fail in the more complex cases (such as memory allocation failures). Therefore, this commit assigns the TLS modid as late as possible. At that point, the link map pointer will eventually be passed to _dl_close, which will undo the TLS modid assignment. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* elf: Never use the file ID of the main executable [BZ #24900]Florian Weimer2019-10-041-21/+31
| | | | | | | | | | | | | | If the loader is invoked explicitly and loads the main executable, it stores the file ID of the main executable in l_file_id. This information is not available if the main excutable is loaded by the kernel, so this is another case where the two cases differ. This enhances commit 23d2e5faf0bca6d9b31bef4aa162b95ee64cbfc6 ("elf: Self-dlopen failure with explict loader invocation [BZ #24900]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
* Add UNSUPPORTED check in elf/tst-pldd.Stefan Liebler2019-09-181-19/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | The testcase forks a child process and runs pldd with PID of this child. On systems where /proc/sys/kernel/yama/ptrace_scope differs from zero, pldd will fail with /usr/bin/pldd: cannot attach to process 3: Operation not permitted This patch checks if ptrace_scope exists, is zero "classic ptrace permissions" or one "restricted ptrace". If ptrace_scope exists and has a higher restriction, then the test is marked as UNSUPPORTED. The case "restricted ptrace" is handled by rearranging the processes involved during the test. Now we have the following process tree: -parent: do_test (performs output checks) --subprocess 1: pldd_process (becomes pldd via execve) ---subprocess 2: target_process (ptraced via pldd) ChangeLog: * elf/tst-pldd.c (do_test): Add UNSUPPORTED check. Rearrange subprocesses. (pldd_process): New function. * support/Makefile (libsupport-routines): Add support_ptrace. * support/xptrace.h: New file. * support/support_ptrace.c: Likewise.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-07167-168/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* MIPS support for GNU hashMihailo Stojanovic2019-08-293-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a reimplementation of [1], which was submitted back in 2015. Copyright issue has been sorted [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering of the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word at the beggining of the section, which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue reported in [3] which is caused by the leading word of the .MIPS.xhash section. Leading word is now removed in the corresponding binutils patch, and the number of entries in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag. Since the MIPS specific dl-lookup.c file was removed following the initial patch submission, I opted for the definition of three new macros in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is used to calculate the index of a symbol in GNU hash. On MIPS, it is defined to look up the symbol index in the translation table. ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the .MIPS.xhash pointer in the link_map_machine struct. The other major change is bumping the highest EI_ABIVERSION value for MIPS to suggest that the dynamic linker now supports GNU hash. The patch was tested by running the glibc testsuite for the three MIPS ABIs (o32, n32 and n64) and for x86_64-linux-gnu. [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html * elf/dl-addr.c (determine_info): Calculate the symbol index using the newly defined ELF_MACHINE_HASH_SYMIDX macro. * elf/dl-lookup.c (do_lookup_x): Ditto. (_dl_setup_hash): Initialize MIPS xhash translation table. * elf/elf.h (SHT_MIPS_XHASH): New define. (DT_MIPS_XHASH): New define. * sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/linkmap.h (struct link_map_machine): New member. * sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI version. * sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
* elf: Self-dlopen failure with explict loader invocation [BZ #24900]Florian Weimer2019-08-154-25/+94
| | | | | | | | | | | | | | | | | | | | In case of an explicit loader invocation, ld.so essentially performs a dlopen call to load the main executable. Since the pathname of the executable is known at this point, it gets stored in the link map. In regular mode, the pathname is not known and "" is used instead. As a result, if a program calls dlopen on the pathname of the main program, the dlopen call succeeds and returns a handle for the main map. This results in an unnecessary difference between glibc testing (without --enable-hardcoded-path-in-tests) and production usage. This commit discards the names when building the link map in _dl_new_object for the main executable, but it still determines the origin at this point in case of an explict loader invocation. The reason is that the specified pathname has to be used; the kernel has a different notion of the main executable.
* elf: Support elf/tst-dlopen-aout in more configurationsFlorian Weimer2019-08-122-13/+14
| | | | | | | | | | | | dlopen can no longer open PIE binaries, so it is not necessary to link the executable as non-PIE to trigger a dlopen failure. If we hard-code the path to the real executable, we can run the test with and without hard-coded paths because the dlopen path will not be recognized as the main program in both cases. (With an explict loader invocation, the loader currently adds argv[0] to l_libname for the main map and the dlopen call suceeds as a result; it does not do that in standard mode.)
* Add glibc.malloc.mxfast tunableDJ Delorie2019-08-091-0/+5
| | | | | | | | | | | | * elf/dl-tunables.list: Add glibc.malloc.mxfast. * manual/tunables.texi: Document it. * malloc/malloc.c (do_set_mxfast): New. (__libc_mallopt): Call it. * malloc/arena.c: Add mxfast tunable. * malloc/tst-mxfast.c: New. * malloc/Makefile: Add it. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: tst-ldconfig-bad-aux-cache: use support_capture_subprocessAlexandra Hájková2019-08-051-39/+34
|
* Call _dl_open_check after relocation [BZ #24259]H.J. Lu2019-07-011-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a workaround for [BZ #20839] which doesn't remove the NODELETE object when _dl_open_check throws an exception. Move it after relocation in dl_open_worker to avoid leaving the NODELETE object mapped without relocation. [BZ #24259] * elf/dl-open.c (dl_open_worker): Call _dl_open_check after relocation. * sysdeps/x86/Makefile (tests): Add tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b. (modules-names): Add tst-cet-legacy-mod-5a, tst-cet-legacy-mod-5b, tst-cet-legacy-mod-5c, tst-cet-legacy-mod-6a, tst-cet-legacy-mod-6b and tst-cet-legacy-mod-6c. (CFLAGS-tst-cet-legacy-5a.c): New. (CFLAGS-tst-cet-legacy-5b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5a.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-5c.c): Likewise. (CFLAGS-tst-cet-legacy-6a.c): Likewise. (CFLAGS-tst-cet-legacy-6b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6a.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6b.c): Likewise. (CFLAGS-tst-cet-legacy-mod-6c.c): Likewise. ($(objpfx)tst-cet-legacy-5a): Likewise. ($(objpfx)tst-cet-legacy-5a.out): Likewise. ($(objpfx)tst-cet-legacy-mod-5a.so): Likewise. ($(objpfx)tst-cet-legacy-mod-5b.so): Likewise. ($(objpfx)tst-cet-legacy-5b): Likewise. ($(objpfx)tst-cet-legacy-5b.out): Likewise. (tst-cet-legacy-5b-ENV): Likewise. ($(objpfx)tst-cet-legacy-6a): Likewise. ($(objpfx)tst-cet-legacy-6a.out): Likewise. ($(objpfx)tst-cet-legacy-mod-6a.so): Likewise. ($(objpfx)tst-cet-legacy-mod-6b.so): Likewise. ($(objpfx)tst-cet-legacy-6b): Likewise. ($(objpfx)tst-cet-legacy-6b.out): Likewise. (tst-cet-legacy-6b-ENV): Likewise. * sysdeps/x86/tst-cet-legacy-5.c: New file. * sysdeps/x86/tst-cet-legacy-5a.c: Likewise. * sysdeps/x86/tst-cet-legacy-5b.c: Likewise. * sysdeps/x86/tst-cet-legacy-6.c: Likewise. * sysdeps/x86/tst-cet-legacy-6a.c: Likewise. * sysdeps/x86/tst-cet-legacy-6b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5a.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-5c.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6a.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6b.c: Likewise. * sysdeps/x86/tst-cet-legacy-mod-6c.c: Likewise.
* ld.so: Support moving versioned symbols between sonames [BZ #24741]Florian Weimer2019-06-2810-35/+188
| | | | | | | | | | | | | | | | | | | This change should be fully backwards-compatible because the old code aborted the load if a soname mismatch was encountered (instead of searching further for a matching symbol). This means that no different symbols are found. The soname check was explicitly disabled for the skip_map != NULL case. However, this only happens with dl(v)sym and RTLD_NEXT, and those lookups do not come with a verneed entry that could be used for the check. The error check was already explicitly disabled for the skip_map != NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But _dl_vsym always sets filename in the struct r_found_version argument to NULL, so the check was not active anyway. This means that symbol lookup results for the skip_map != NULL case do not change, either.
* elf: Refuse to dlopen PIE objects [BZ #24323]Florian Weimer2019-06-183-5/+66
| | | | | Another executable has already been mapped, so the dynamic linker cannot perform relocations correctly for the second executable.
* aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCSSzabolcs Nagy2019-06-131-0/+7
| | | | | | | | | | | | | STO_AARCH64_VARIANT_PCS is a non-visibility st_other flag for marking symbols that reference functions that may follow a variant PCS with different register usage convention from the base PCS. DT_AARCH64_VARIANT_PCS is a dynamic tag that marks ELF modules that have R_*_JUMP_SLOT relocations for symbols marked with STO_AARCH64_VARIANT_PCS (i.e. have variant PCS calls via a PLT). * elf/elf.h (STO_AARCH64_VARIANT_PCS): Define. (DT_AARCH64_VARIANT_PCS): Define.
* elf: Add tst-ldconfig-bad-aux-cache test [BZ #18093]Alexandra Hájková2019-05-234-0/+122
| | | | | | | This test corrupts /var/cache/ldconfig/aux-cache and executes ldconfig to check it will not segfault using the corrupted aux_cache. The test uses the test-in-container framework. Verified no regressions on x86_64.
* Add NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS from Linux 5.1 to elf.h.Joseph Myers2019-05-201-0/+4
| | | | | | | | | | This patch adds the new NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS from Linux 5.1 to glibc's elf.h. Tested for x86_64. * elf/elf.h (NT_ARM_PACA_KEYS): New macro. (NT_ARM_PACG_KEYS): Likewise.
* elf: Fix tst-pldd for non-default --prefix and/or --bindir (BZ#24544)Adhemerval Zanella2019-05-141-1/+5
| | | | | | | | | | | | | | Use a new libsupport support_bindir_prefix instead of a hardcoded /usr/bin to create the pldd path on container directory. Checked on x86_64-linux-gnu with default and non-default --prefix and --bindir paths, as well with --enable-hardcoded-path-in-tests. [BZ #24544] * elf/tst-pldd.c (do_test): Use support_bindir_prefix instead of pre-defined value. Reviewed-by: DJ Delorie <dj@redhat.com>
* elf: Fix elf/tst-pldd with --enable-hardcoded-path-in-tests (BZ#24506)Adhemerval Zanella2019-05-021-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | The elf/tst-pldd (added by 1a4c27355e146 to fix BZ#18035) test does not expect the hardcoded paths that are output by pldd when the test is built with --enable-hardcoded-path-in-tests. Instead of showing the ABI installed library names for loader and libc (such as ld-linux-x86-64.so.2 and libc.so.6 for x86_64), pldd shows the default built ld.so and libc.so. It makes the tests fail with an invalid expected loader/libc name. This patch fixes the elf-pldd test by adding the canonical ld.so and libc.so names in the expected list of possible outputs when parsing the result output from pldd. The test now handles both default build and --enable-hardcoded-path-in-tests option. Checked on x86_64-linux-gnu (built with and without --enable-hardcoded-path-in-tests) and i686-linux-gnu. * elf/tst-pldd.c (in_str_list): New function. (do_test): Add default names for ld and libc as one option. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Link sotruss-lib.so with BIND_NOW for --enable-bind-nowFlorian Weimer2019-04-261-0/+1
| | | | | | | | | The audit module itself can be linked with BIND_NOW; it does not affect its functionality. This should complete the leftovers from commit 2d6ab5df3b675e96ee587ae6a8c2ce004c6b1ba9 ("Document and fix --enable-bind-now [BZ #21015]").
* elf: Fix pldd (BZ#18035)Adhemerval Zanella2019-04-234-108/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 9182aa67994 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map for executable itself and loader will have both l_name and l_libname->name holding the same value due: elf/dl-object.c 95 new->l_name = *realname ? realname : (char *) newname->name + libname_len - 1; Since newname->name points to new->l_libname->name. This leads to pldd to an infinite call at: elf/pldd-xx.c 203 again: 204 while (1) 205 { 206 ssize_t n = pread64 (memfd, tmpbuf.data, tmpbuf.length, name_offset); 228 /* Try the l_libname element. */ 229 struct E(libname_list) ln; 230 if (pread64 (memfd, &ln, sizeof (ln), m.l_libname) == sizeof (ln)) 231 { 232 name_offset = ln.name; 233 goto again; 234 } Since the value at ln.name (l_libname->name) will be the same as previously read. The straightforward fix is just avoid the check and read the new list entry. I checked also against binaries issues with old loaders with fix for BZ#387, and pldd could dump the shared objects. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and powerpc64le-linux-gnu. [BZ #18035] * elf/Makefile (tests-container): Add tst-pldd. * elf/pldd-xx.c: Use _Static_assert in of pldd_assert. (E(find_maps)): Avoid use alloca, use default read file operations instead of explicit LFS names, and fix infinite loop. * elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers. (get_process_info): Use _Static_assert instead of assert, use default directory operations instead of explicit LFS names, and free some leadek pointers. * elf/tst-pldd.c: New file.
* Add NT_ARM_PAC_MASK and NT_MIPS_MSA from Linux 5.0 to elf.h.Joseph Myers2019-03-251-0/+3
| | | | | | | | | This patch adds two new NT_* macros from Linux 5.0 to elf.h. Tested for x86_64. * elf/elf.h (NT_ARM_PAC_MASK): New macro. (NT_MIPS_MSA): Likewise.
* Refactor hp-timing rtld usageAdhemerval Zanella2019-03-221-151/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor how hp-timing is used on loader code for statistics report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and HP_TIMING_INLINE is used instead to check for hp-timing avaliability. For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE is set iff for IS_IN(rtld). Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked the builds for all afected ABIs. * benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with HP_TIMING_INLINE. * nptl/descr.h: Likewise. * elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF, RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define. (dl_start_final_info, _dl_start_final, dl_main, print_statistics): Abstract hp-timing usage with RTLD_* macros. * sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld). (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove. * sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL, HP_TIMING_NONAVAIL): Likewise. * sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/generic/hp-timing-common.h: Update comment with HP_TIMING_AVAIL removal.
* nptl: Remove pthread_clock_gettime pthread_clock_settimeAdhemerval Zanella2019-03-222-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support from clock_gettime and clock_settime generic implementation. For Linux, kernel already provides supports through the syscall and Hurd HTL lacks __pthread_clock_gettime and __pthread_clock_settime internal implementation. As described in clock_gettime man-page [1] on 'Historical note for SMP system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers is error-prone and susceptible to timing and accurary issues that the libc can not deal without kernel support. This allows removes unused code which, however, still incur in some runtime overhead in thread creation (the struct pthread cpuclock_offset initialization). If hurd eventually wants to support them it should either either implement as a kernel facility (or something related due its architecture) or in system specific implementation. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked on a i686-gnu build. * nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and pthread_clock_settime. * nptl/pthreadP.h (__find_thread_by_id): Remove prototype. * elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. (_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting. * elf/rtld.c (_dl_start_final): Likewise. * nptl/allocatestack.c (__find_thread_by_id): Remove function. * sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * nptl/descr.h (struct pthread): Rename cpuclock_offset to cpuclock_offset_ununsed. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove cpuclock_offset set. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * nptl/pthread_clock_gettime.c: Remove file. * nptl/pthread_clock_settime.c: Likewise. * sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function. [HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support. * sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise. [HP_TIMING_AVAIL] (realtime_gettime): Likewise. * sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise. [HP_TIMING_AVAIL] (__clock_getres): Likewise. * sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P): Likewise. (__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage. [1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
* Fix output of LD_SHOW_AUXV=1.Stefan Liebler2019-03-131-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with commit 1616d034b61622836d3a36af53dcfca7624c844e the output was corrupted on some platforms as _dl_procinfo was called for every auxv entry and on some architectures like s390 all entries were represented as "AT_HWCAP". This patch is removing the condition and let _dl_procinfo decide if an entry is printed in a platform specific or generic way. This patch also adjusts all _dl_procinfo implementations which assumed that they are only called for AT_HWCAP or AT_HWCAP2. They are now just returning a non-zero-value for entries which are not handled platform specifc. ChangeLog: * elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always call _dl_procinfo. * sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo): Ignore types other than AT_HWCAP. * sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise. * sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo): Likewise. * sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment in the case of falling back to generic output mechanism. * sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo): Likewise.
* elf: Add DF_1_KMOD, DF_1_WEAKFILTER, DF_1_NOCOMMON to <elf.h>Florian Weimer2019-03-121-0/+3
| | | | | These constants (originally from Solaris) were part of the binutils 2.31 release.
* C-SKY: add elf header definition for elfutilsMao Han2019-03-111-2/+13
| | | | | | | | | This patch adds some defines relate to machine flag and section information, which is used by elfutils elflint check. A C-SKY typo is also fixed with this patch. * elf/elf.h (EF_CSKY_ABIMASK, EF_CSKY_OTHER, EF_CSKY_PROCESSOR) (EF_CSKY_ABIV1, EF_CSKY_ABIV2, SHT_CSKY_ATTRIBUTES): New defines.
* elf: Remove remnants of MAP_ANON emulationFlorian Weimer2019-03-041-15/+0
| | | | | | Most of the code was removed in commit 20739e5454c12acbc0479387fe795c5b19a4166f ("* elf/dl-load.c: Remove support for systems without MAP_ANON.").
* elf/tst-big-note: Improve accuracy of test [BZ #20419]Florian Weimer2019-03-012-4/+15
| | | | | | | | | | | | | | | | It is possible that the link editor injects an allocated ABI tag note before the artificial, allocated large note in the test. Note parsing in open_verify stops when the first ABI tag note is encountered, so if the ABI tag note comes first, the problematic code is not actually exercised. Also tweak the artificial note so that it is a syntactically valid 4-byte aligned note, in case the link editor tries to parse notes and process them. Improves the testing part of commit 0065aaaaae51cd60210ec3a7e13. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Add tests with a local IFUNC resolver [BZ #23937]Florian Weimer2019-02-286-3/+120
| | | | | | | | | | | | The existing tests all use global symbols (but with different visibility). Local symbols could be treated differently by the compiler and linker (as was the case on POWER ELFv2, causing bug 23937), and we did not have test coverage for this. Tested on x86-64 and POWER ELFv2 little-endian, with and without --disable-multi-arch. On POWER, the test cases elf/ifuncmain9, elf/ifuncmain9pic, elf/ifuncmain9pie reproduce bug 23937 with older binutils.
* elf/Makefile: Run IFUNC tests if binutils supports IFUNCH.J. Lu2019-02-271-1/+1
| | | | | | | | | | | | | | We should run IFUNC tests with --disable-multi-arch if the toolchain supports IFUNCs. For correctness, --disable-multi-arch must not remove IFUNC support from the loader. Tested on x86-64, x32 and i686 with and without --disable-multi-arch. * configure.ac (have-ifunc): New LIBC_CONFIG_VAR. * configure: Regenerated. * elf/Makefile: Run IFUNC tests if binutils supports IFUNC. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Add some spaces before '('.Joseph Myers2019-02-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes various places where a space should have been present before '(' in accordance with the GNU Coding Standards. Most but not all of the fixes in this patch are for calls to sizeof (but it's not exhaustive regarding such calls that should be fixed). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-strcpy.c (do_test): Use space before '('. * benchtests/bench-string.h (cmdline_process_function): Likewise. * benchtests/bench-strlen.c (do_test): Likewise. (test_main): Likewise. * catgets/gencat.c (read_old): Likewise. * elf/cache.c (load_aux_cache): Likewise. * iconvdata/bug-iconv8.c (do_test): Likewise. * math/test-tgmath-ret.c (do_test): Likewise. * nis/nis_call.c (rec_dirsearch): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nptl/tst-audit-threads.c (do_test): Likewise. * nptl/tst-cancel4-common.h (set_socket_buffer): Likewise. * nss/nss_test1.c (init): Likewise. * nss/test-netdb.c (test_hosts): Likewise. * posix/execvpe.c (maybe_script_execute): Likewise. * stdio-common/tst-fmemopen4.c (do_test): Likewise. * stdio-common/tst-printf.c (do_test): Likewise. * stdio-common/vfscanf-internal.c (__vfscanf_internal): Likewise. * stdlib/fmtmsg.c (NKEYWORDS): Likewise. * stdlib/qsort.c (STACK_SIZE): Likewise. * stdlib/test-canon.c (do_test): Likewise. * stdlib/tst-swapcontext1.c (do_test): Likewise. * string/memcmp.c (OPSIZ): Likewise. * string/test-strcpy.c (do_test): Likewise. (do_random_tests): Likewise. * string/test-strlen.c (do_test): Likewise. (test_main): Likewise. * string/test-strrchr.c (do_test): Likewise. (do_random_tests): Likewise. * string/tester.c (test_memrchr): Likewise. (test_memchr): Likewise. * sysdeps/generic/memcopy.h (OPSIZ): Likewise. * sysdeps/generic/unwind-dw2.c (execute_stack_op): Likewise. * sysdeps/generic/unwind-pe.h (read_sleb128): Likewise. (read_encoded_value_with_base): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_runtime_setup): Likewise. * sysdeps/hppa/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/ia64/fpu/sfp-machine.h (TI_BITS): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/posix/spawni.c (maybe_script_execute): Likewise. * sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (query_auxv): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/ioperm.c (init_iosys): Likewise. * sysdeps/unix/sysv/linux/csky/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/spawni.c (maybe_script_execute): Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h (FP_XSTATE_MAGIC2_SIZE): Likewise. * sysdeps/x86/fpu/sfp-machine.h (TI_BITS): Likewise. * time/test_time.c (main): Likewise.
* Break more lines before not after operators.Joseph Myers2019-02-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes further coding style fixes where code was breaking lines after an operator, contrary to the GNU Coding Standards. As with the previous patch, it is limited to files following a reasonable approximation to GNU style already, and is not exhaustive; more such issues remain to be fixed. Tested for x86_64, and with build-many-glibcs.py. * dirent/dirent.h [!_DIRENT_HAVE_D_NAMLEN && _DIRENT_HAVE_D_RECLEN] (_D_ALLOC_NAMLEN): Break lines before rather than after operators. * elf/cache.c (print_cache): Likewise. * gshadow/fgetsgent_r.c (__fgetsgent_r): Likewise. * htl/pt-getattr.c (__pthread_getattr_np): Likewise. * hurd/hurdinit.c (_hurd_setproc): Likewise. * hurd/hurdkill.c (_hurd_sig_post): Likewise. * hurd/hurdlookup.c (__file_name_lookup_under): Likewise. * hurd/hurdsig.c (_hurd_internal_post_signal): Likewise. (reauth_proc): Likewise. * hurd/lookup-at.c (__file_name_lookup_at): Likewise. (__file_name_split_at): Likewise. (__directory_name_split_at): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/port2fd.c (_hurd_port2fd): Likewise. * iconv/gconv_dl.c (do_print): Likewise. * inet/netinet/in.h (struct sockaddr_in): Likewise. * libio/wstrops.c (_IO_wstr_seekoff): Likewise. * locale/setlocale.c (new_composite_name): Likewise. * malloc/memusagestat.c (main): Likewise. * misc/fstab.c (fstab_convert): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. * nss/nss_compat/compat-grp.c (getgrent_next_nss): Likewise. (getgrent_next_file): Likewise. (internal_getgrnam_r): Likewise. (internal_getgrgid_r): Likewise. * nss/nss_compat/compat-initgroups.c (getgrent_next_nss): Likewise. (internal_getgrent_r): Likewise. * nss/nss_compat/compat-pwd.c (getpwent_next_nss_netgr): Likewise. (getpwent_next_nss): Likewise. (getpwent_next_file): Likewise. (internal_getpwnam_r): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (getspent_next_nss_netgr): Likewise. (getspent_next_nss): Likewise. (internal_getspnam_r): Likewise. * pwd/fgetpwent_r.c (__fgetpwent_r): Likewise. * shadow/fgetspent_r.c (__fgetspent_r): Likewise. * string/strchr.c (STRCHR): Likewise. * string/strchrnul.c (STRCHRNUL): Likewise. * sysdeps/aarch64/fpu/fpu_control.h (_FPU_FPCR_IEEE): Likewise. * sysdeps/aarch64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/csky/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/generic/memcopy.h (PAGE_COPY_FWD_MAYBE): Likewise. * sysdeps/generic/symbol-hacks.h (__stack_chk_fail_local): Likewise. * sysdeps/gnu/netinet/ip_icmp.h (ICMP_INFOTYPE): Likewise. * sysdeps/gnu/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/gnu/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/hppa/jmpbuf-unwind.h (_JMPBUF_UNWINDS): Likewise. * sysdeps/mach/hurd/bits/stat.h (S_ISPARE): Likewise. * sysdeps/mach/hurd/dl-sysdep.c (_dl_sysdep_start): Likewise. (open_file): Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprotocol.c (pthread_mutexattr_setprotocol): Likewise. * sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/ptrace.c (ptrace): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_type_class): Likewise. (elf_machine_rela): Likewise. * sysdeps/mips/mips32/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/mips64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/sys/asm.h (multiple #if conditionals): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/powerpc/novmx-sigjmp.c (__novmx__sigjmp_save): Likewise. * sysdeps/powerpc/sigjmp.c (__vmx__sigjmp_save): Likewise. * sysdeps/s390/fpu/fenv_libc.h (FPC_VALID_MASK): Likewise. * sysdeps/s390/utf8-utf16-z9.c (gconv_end): Likewise. * sysdeps/unix/grantpt.c (grantpt): Likewise. * sysdeps/unix/sysv/linux/a.out.h (N_TXTOFF): Likewise. * sysdeps/unix/sysv/linux/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/unix/sysv/linux/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/x86/cpu-features.c (get_common_indices): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
* Break some lines before not after operators.Joseph Myers2019-02-226-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GNU Coding Standards specify that line breaks in expressions should go before an operator, not after one. This patch fixes various code to do this. It only changes code that appears to be mostly following GNU style anyway, not files and directories with substantially different formatting. It is not exhaustive even for files using GNU style (for example, changes to sysdeps files are deferred for subsequent cleanups). Some files changed are shared with gnulib, but most are specific to glibc. Changes were made manually, with places to change found by grep (so some cases, e.g. where the operator was followed by a comment at end of line, are particularly liable to have been missed by grep, but I did include cases where the operator was followed by backslash-newline). This patch generally does not attempt to address other coding style issues in the expressions changed (for example, missing spaces before '(', or lack of parentheses to ensure indentation of continuation lines properly reflects operator precedence). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-memmem.c (simple_memmem): Break lines before rather than after operators. * benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise. * crypt/md5.c (md5_finish_ctx): Likewise. * crypt/sha256.c (__sha256_finish_ctx): Likewise. * crypt/sha512.c (__sha512_finish_ctx): Likewise. * elf/cache.c (load_aux_cache): Likewise. * elf/dl-load.c (open_verify): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * elf/readelflib.c (process_elf_file): Likewise. * elf/rtld.c (dl_main): Likewise. * elf/sprof.c (generate_call_graph): Likewise. * hurd/ctty-input.c (_hurd_ctty_input): Likewise. * hurd/ctty-output.c (_hurd_ctty_output): Likewise. * hurd/dtable.c (reauth_dtable): Likewise. * hurd/getdport.c (__getdport): Likewise. * hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise. * hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise. * hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise): Likewise. * hurd/hurdioctl.c (fioctl): Likewise. * hurd/hurdselect.c (_hurd_select): Likewise. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise. (STOPSIGS): Likewise. * hurd/hurdstartup.c (_hurd_startup): Likewise. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/msgportdemux.c (msgport_server): Likewise. * hurd/setauth.c (_hurd_setauth): Likewise. * include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise. * libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise. * locale/programs/ld-ctype.c (set_class_defaults): Likewise. * localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise. * login/tst-utmp.c (do_check): Likewise. (simulate_login): Likewise. * mach/lowlevellock.h (lll_lock): Likewise. (lll_trylock): Likewise. * math/test-fenv.c (ALL_EXC): Likewise. * math/test-fenvinline.c (ALL_EXC): Likewise. * misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise. * nis/nis_call.c (__do_niscall3): Likewise. * nis/nis_callback.c (cb_prog_1): Likewise. * nis/nis_defaults.c (searchaccess): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nis/nis_ismember.c (internal_ismember): Likewise. * nis/nis_local_names.c (nis_local_principal): Likewise. * nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise. * nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r): Likewise. * nis/ypclnt.c (yp_match): Likewise. (yp_first): Likewise. (yp_next): Likewise. (yp_master): Likewise. (yp_order): Likewise. * nscd/hstcache.c (cache_addhst): Likewise. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise. * posix/glob.h (__GLOB_FLAGS): Likewise. * posix/regcomp.c (peek_token): Likewise. (peek_token_bracket): Likewise. (parse_expression): Likewise. * posix/regexec.c (sift_states_iter_mb): Likewise. (check_node_accept_bytes): Likewise. * posix/tst-spawn3.c (do_test): Likewise. * posix/wordexp-test.c (testit): Likewise. * posix/wordexp.c (parse_tilde): Likewise. (exec_comm): Likewise. * posix/wordexp.h (__WRDE_FLAGS): Likewise. * resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise. * setjmp/sigjmp.c (__sigjmp_save): Likewise. * stdio-common/printf_fp.c (__printf_fp_l): Likewise. * stdio-common/tst-fileno.c (do_test): Likewise. * stdio-common/vfprintf-internal.c (vfprintf): Likewise. * stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise. * stdlib/strtod_l.c (round_and_return): Likewise. (____STRTOF_INTERNAL): Likewise. * stdlib/tst-strfrom.h (TEST_STRFROM): Likewise. * string/strcspn.c (STRCSPN): Likewise. * string/test-memmem.c (simple_memmem): Likewise. * termios/tcsetattr.c (tcsetattr): Likewise. * time/alt_digit.c (_nl_parse_alt_digit): Likewise. * time/asctime.c (asctime_internal): Likewise. * time/strptime_l.c (__strptime_internal): Likewise. * time/sys/time.h (timercmp): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
* RISC-V: Fix elfutils testsuite unwind failures.Jim Wilson2019-02-132-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clone.S patch fixes 2 elfutils testsuite unwind failures, where the backtrace gets stuck repeating __thread_start until we hit the backtrace limit. This was confirmed by building and installing a patched glibc and then building elfutils and running its testsuite. Unfortunately, the testcase isn't working as expected and I don't know why. The testcase passes even when my clone.S patch is not installed. The testcase looks logically similarly to the elfutils testcases that are failing. Maybe there is a subtle difference in how the glibc unwinding works versus the elfutils unwinding? I don't have good gdb pthread support yet, so I haven't found a way to debug this. Anyways, I don't know if the testcase is useful or not. If the testcase isn't useful then maybe the clone.S patch is OK without a testcase? Jim [BZ #24040] * elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0. * elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h (func): New. (main): If USE_PTHREADS, call pthread_create to run func. Otherwise call func directly. * nptl/Makefile (tests): Add tst-unwind-thread. (CFLAGS-tst-unwind-thread.c): Define. * nptl/tst-unwind-thread.c: New file. * sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra as undefined.
* elf: Test for LD_AUDIT module returning zero from la_version [BZ #24122]Adhemerval Zanella2019-02-123-2/+128
| | | | | | This includes the original test case from commit 8e889c5da3c5981c5a46a93fec02de40131ac5a6 ("elf: Fix LD_AUDIT for modules with invalid version (BZ#24122)).
* elf: Ignore LD_AUDIT interfaces if la_version returns 0 [BZ #24122]Florian Weimer2019-02-121-162/+200
| | | | | | | | | | | | | | | | | This change moves the audit module loading and early notification into separate functions out of dl_main. It restores the bug fix from commit 8e889c5da3c5981c5a46a93fec02de40131ac5a6 ("elf: Fix LD_AUDIT for modules with invalid version (BZ#24122)") which was reverted in commit 83e6b59625f45db1eee93e5684091f740c52a083 ("[elf] Revert 8e889c5da3 (BZ#24122)"). The actual bug fix is the separate error message for the case when la_version returns zero. The dynamic linker error message (which is NULL in this case) is no longer used. Based on the intended use of version zero (ignore this module due to explicit request), the message is only printed if debugging is enabled.
* Add fall-through comments.Joseph Myers2019-02-123-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds fall-through comments in some cases where -Wextra produces implicit-fallthrough warnings. The patch is non-exhaustive. Apart from architecture-specific code for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy code, probably should have such changes, but left to be dealt with separately), or places that already had comments about the fall-through but not matching the form expected by -Wimplicit-fallthrough=3 (the default level with -Wextra; my inclination is to adjust those comments to match rather than downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one place where I thought the implicit fallthrough was not correct and so should be handled separately as a bug fix. I think the key thing to consider in review of this patch is whether the fall-through is indeed intended and correct in each place where such a comment is added. Tested for x86_64. * elf/dl-exception.c (_dl_exception_create_format): Add fall-through comments. * elf/ldconfig.c (parse_conf_include): Likewise. * elf/rtld.c (print_statistics): Likewise. * locale/programs/charmap.c (parse_charmap): Likewise. * misc/mntent_r.c (__getmntent_r): Likewise. * posix/wordexp.c (parse_arith): Likewise. (parse_backtick): Likewise. * resolv/ns_ttl.c (ns_parse_ttl): Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
* Avoid "inline" after return type in function definitions.Joseph Myers2019-02-063-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One group of warnings seen with -Wextra is warnings for static or inline not at the start of a declaration (-Wold-style-declaration). This patch fixes various such cases for inline, ensuring it comes at the start of the declaration (after any static). A common case of the fix is "static inline <type> __always_inline"; the definition of __always_inline starts with __inline, so the natural change is to "static __always_inline <type>". Other cases of the warning may be harder to fix (one pattern is a function definition that gets rewritten to be static by an including file, "#define funcname static wrapped_funcname" or similar), but it seems worth fixing these cases with inline anyway. Tested for x86_64. * elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline before return type, without separate inline. * elf/dl-tunables.c (maybe_enable_malloc_check): Likewise. * elf/dl-tunables.h (tunable_is_name): Likewise. * malloc/malloc.c (do_set_trim_threshold): Likewise. (do_set_top_pad): Likewise. (do_set_mmap_threshold): Likewise. (do_set_mmaps_max): Likewise. (do_set_mallopt_check): Likewise. (do_set_perturb_byte): Likewise. (do_set_arena_test): Likewise. (do_set_arena_max): Likewise. (do_set_tcache_max): Likewise. (do_set_tcache_count): Likewise. (do_set_tcache_unsorted_limit): Likewise. * nis/nis_subr.c (count_dots): Likewise. * nptl/allocatestack.c (advise_stack_range): Likewise. * sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise. (do_sin): Likewise. (reduce_sincos): Likewise. (do_sincos): Likewise. * sysdeps/unix/sysv/linux/x86/elision-conf.c (do_set_elision_enable): Likewise. (TUNABLE_CALLBACK_FNDECL): Likewise.
* elf: Implement --preload option for the dynamic linkerDavid Newall2019-02-043-6/+74
|
* [elf] Revert 8e889c5da3 (BZ#24122)Adhemerval Zanella2019-01-254-153/+7
| | | | | It triggers an invalid build issue on GCC8+ and does not covers all corner cases.
* elf: Fix LD_AUDIT for modules with invalid version (BZ#24122)Adhemerval Zanella2019-01-244-7/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error handling patch for invalid audit modules version access invalid memory: elf/rtld.c: 1454 unsigned int (*laversion) (unsigned int); 1455 unsigned int lav; 1456 if (err_str == NULL 1457 && (laversion = largs.result) != NULL 1458 && (lav = laversion (LAV_CURRENT)) > 0 1459 && lav <= LAV_CURRENT) 1460 { [...] 1526 else 1527 { 1528 /* We cannot use the DSO, it does not have the 1529 appropriate interfaces or it expects something 1530 more recent. */ 1531 #ifndef NDEBUG 1532 Lmid_t ns = dlmargs.map->l_ns; 1533 #endif 1534 _dl_close (dlmargs.map); 1535 1536 /* Make sure the namespace has been cleared entirely. */ 1537 assert (GL(dl_ns)[ns]._ns_loaded == NULL); 1538 assert (GL(dl_ns)[ns]._ns_nloaded == 0); 1539 1540 GL(dl_tls_max_dtv_idx) = tls_idx; 1541 goto not_loaded; 1542 } 1431 const char *err_str = NULL; 1432 bool malloced; 1433 (void) _dl_catch_error (&objname, &err_str, &malloced, dlmopen_doit, 1434 &dlmargs); 1435 if (__glibc_unlikely (err_str != NULL)) 1436 { 1437 not_loaded: 1438 _dl_error_printf ("\ 1439 ERROR: ld.so: object '%s' cannot be loaded as audit interface: %s; ignored.\n", 1440 name, err_str); 1441 if (malloced) 1442 free ((char *) err_str); 1443 } On failure the err_str will be NULL and _dl_debug_vdprintf does not handle it properly: elf/dl-misc.c: 200 case 's': 201 /* Get the string argument. */ 202 iov[niov].iov_base = va_arg (arg, char *); 203 iov[niov].iov_len = strlen (iov[niov].iov_base); 204 if (prec != -1) 205 iov[niov].iov_len = MIN ((size_t) prec, iov[niov].iov_len); 206 ++niov; 207 break; This patch fixes the issues and improves the error message. Checked on x86_64-linux-gnu and i686-linux-gnu [BZ #24122] * elf/Makefile (tests): Add tst-audit13. (modules-names): Add tst-audit13mod1. (tst-audit13.out, LDFLAGS-tst-audit13mod1.so, tst-audit13-ENV): New rule. * elf/rtld.c (dl_main): Handle invalid audit module version. * elf/tst-audit13.c: New file. * elf/tst-audit13mod1.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates not handled by scripts/update-copyrights.Joseph Myers2019-01-015-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've updated copyright dates in glibc for 2019. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2019 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-01154-154/+154
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Print cache size and geometry auxv types on LD_SHOW_AUXV=1Tulio Magno Quites Machado Filho2018-12-191-29/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY when LD_SHOW_AUXV=1. AT_L*_CACHESIZE is printed as decimal and represent the number of bytes of the cache. AT_L*_CACHEGEOMETRY is treated in order to specify the cache line size and its associativity. Example output from a POWER8: AT_L1I_CACHESIZE: 32768 AT_L1I_CACHEGEOMETRY: 128B line size, 8-way set associative AT_L1D_CACHESIZE: 65536 AT_L1D_CACHEGEOMETRY: 128B line size, 8-way set associative AT_L2_CACHESIZE: 524288 AT_L2_CACHEGEOMETRY: 128B line size, 8-way set associative AT_L3_CACHESIZE: 8388608 AT_L3_CACHEGEOMETRY: 128B line size, 8-way set associative Some of the new types are longer than the previous ones, requiring to increase the indentation in order to keep the values aligned. * elf/dl-sysdep.c (auxvars): Add AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY. Fix indentation when printing the other fields. (_dl_show_auxv): Give a special treatment to AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY. * sysdeps/powerpc/dl-procinfo.h (cache_geometry): New function. (_dl_procinfo): Fix indentation when printing AT_HWCAP and AT_HWCAP2. Add support for AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY. Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Fix _dl_profile_fixup data-dependency issue (Bug 23690)Tulio Magno Quites Machado Filho2018-11-301-5/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a data-dependency between the fields of struct l_reloc_result and the field used as the initialization guard. Users of the guard expect writes to the structure to be observable when they also observe the guard initialized. The solution for this problem is to use an acquire and release load and store to ensure previous writes to the structure are observable if the guard is initialized. The previous implementation used DL_FIXUP_VALUE_ADDR (l_reloc_result->addr) as the initialization guard, making it impossible for some architectures to load and store it atomically, i.e. hppa and ia64, due to its larger size. This commit adds an unsigned int to l_reloc_result to be used as the new initialization guard of the struct, making it possible to load and store it atomically in all architectures. The fix ensures that the values observed in l_reloc_result are consistent and do not lead to crashes. The algorithm is documented in the code in elf/dl-runtime.c (_dl_profile_fixup). Not all data races have been eliminated. Tested with build-many-glibcs and on powerpc, powerpc64, and powerpc64le. [BZ #23690] * elf/dl-runtime.c (_dl_profile_fixup): Guarantee memory modification order when accessing reloc_result->addr. * include/link.h (reloc_result): Add field init. * nptl/Makefile (tests): Add tst-audit-threads. (modules-names): Add tst-audit-threads-mod1 and tst-audit-threads-mod2. Add rules to build tst-audit-threads. * nptl/tst-audit-threads-mod1.c: New file. * nptl/tst-audit-threads-mod2.c: Likewise. * nptl/tst-audit-threads.c: Likewise. * nptl/tst-audit-threads.h: Likewise. Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf/dl-exception.c: Include <_itoa.h> for _itoa prototypeH.J. Lu2018-11-291-0/+1
| | | | | | Tested with build-many-glibcs.py. * elf/dl-exception.c: Include <_itoa.h>.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-31 16:27:28 +0000