about summary refs log tree commit diff
path: root/elf/rtld.c
Commit message (Collapse)AuthorAgeFilesLines
* rtld: Account static TLS surplus for audit modulesSzabolcs Nagy2020-07-081-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | The new static TLS surplus size computation is surplus_tls = 192 * (nns-1) + 144 * nns + 512 where nns is controlled via the rtld.nns tunable. This commit accounts audit modules too so nns = rtld.nns + audit modules. rtld.nns should only include the namespaces required by the application, namespaces for audit modules are accounted on top of that so audit modules don't use up the static TLS that is reserved for the application. This allows loading many audit modules without tuning rtld.nns or using up static TLS, and it fixes FAIL: elf/tst-auditmany Note that DL_NNS is currently a hard upper limit for nns, and if rtld.nns + audit modules go over the limit that's a fatal error. By default rtld.nns is 4 which allows 12 audit modules. Counting the audit modules is based on existing audit string parsing code, we cannot use GLRO(dl_naudit) before the modules are actually loaded.
* rtld: Add rtld.nns tunable for the number of supported namespacesSzabolcs Nagy2020-07-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to support DL_NNS (== 16) number of dynamic link namespaces, if we assume 192 bytes of TLS are reserved for libc use and 144 bytes are reserved for other system libraries that use IE TLS. A new tunable is introduced to control the number of supported namespaces and to adjust the surplus static TLS size as follows: surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512 The default is rtld.nns == 4 and then the surplus TLS size is the same as before, so the behaviour is unchanged by default. If an application creates more namespaces than the rtld.nns setting allows, then it is not guaranteed to work, but the limit is not checked. So existing usage will continue to work, but in the future if an application creates more than 4 dynamic link namespaces then the tunable will need to be set. In this patch DL_NNS is a fixed value and provides a maximum to the rtld.nns setting. Static linking used fixed 2048 bytes surplus TLS, this is changed so the same contract is used as for dynamic linking. With static linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by default the surplus TLS is reduced to 144 + 512 = 656 bytes. This change is not expected to cause problems. Tested on aarch64-linux-gnu and x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* rtld: Clean up PT_NOTE and add PT_GNU_PROPERTY handlingSzabolcs Nagy2020-07-081-4/+10
| | | | | | | | | | | | | | | | | | | | | | Add generic code to handle PT_GNU_PROPERTY notes. Invalid content is ignored, _dl_process_pt_gnu_property is always called after PT_LOAD segments are mapped and it has no failure modes. Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which contains target specific properties: the _dl_process_gnu_property hook is called for each property. The old _dl_process_pt_note and _rtld_process_pt_note differ in how the program header is read. The old _dl_process_pt_note is called before PT_LOAD segments are mapped and _rtld_process_pt_note is called after PT_LOAD segments are mapped. The old _rtld_process_pt_note is removed and _dl_process_pt_note is always called after PT_LOAD segments are mapped and now it has no failure modes. The program headers are scanned backwards so that PT_NOTE can be skipped if PT_GNU_PROPERTY exists. Co-Authored-By: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86: Move CET control to _dl_x86_feature_control [BZ #25887]H.J. Lu2020-05-181-0/+2
| | | | | | | | | | 1. Include <dl-procruntime.c> to get architecture specific initializer in rtld_global. 2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1. 3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a struct of 2 bitfields for IBT and SHSTK control This fixes [BZ #25887].
* elf: Add initial flag argument to __libc_early_initFlorian Weimer2020-04-291-2/+4
| | | | | | | | | | | The rseq initialization should happen only for the libc in the base namespace (in the dynamic case) or the statically linked libc. The __libc_multiple_libcs flag does not quite cover this case at present, so this commit introduces a flag argument to __libc_early_init, indicating whether the libc being libc is the primary one (of the main program). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Implement __libc_early_initFlorian Weimer2020-04-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function is defined in libc.so, and the dynamic loader calls right after relocation has been finished, before any ELF constructors or the preinit function is invoked. It is also used in the static build for initializing parts of the static libc. To locate __libc_early_init, a direct symbol lookup function is used, _dl_lookup_direct. It does not search the entire symbol scope and consults merely a single link map. This function could also be used to implement lookups in the vDSO (as an optimization). A per-namespace variable (libc_map) is added for locating libc.so, to avoid repeated traversals of the search scope. It is similar to GL(dl_initfirst). An alternative would have been to thread a context argument from _dl_open down to _dl_map_object_from_fd (where libc.so is identified). This could have avoided the global variable, but the change would be larger as a result. It would not have been possible to use this to replace GL(dl_initfirst) because that global variable is used to pass the function pointer past the stack switch from dl_main to the main program. Replacing that requires adding a new argument to _dl_init, which in turn needs changes to the architecture-specific libc.so startup code written in assembler. __libc_early_init should not be used to replace _dl_var_init (as it exists today on some architectures). Instead, _dl_lookup_direct should be used to look up a new variable symbol in libc.so, and that should then be initialized from the dynamic loader, immediately after the object has been loaded in _dl_map_object_from_fd (before relocation is run). This way, more IFUNC resolvers which depend on these variables will work. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Implement DT_AUDIT, DT_DEPAUDIT support [BZ #24943]Florian Weimer2020-04-031-1/+22
| | | | | | | binutils ld has supported --audit, --depaudit for a long time, only support in glibc has been missing. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Simplify handling of lists of audit stringsFlorian Weimer2020-04-031-117/+112
| | | | | | | | | | | | | | | | All list elements are colon-separated strings, and there is a hard upper limit for the number of audit modules, so it is possible to pre-allocate a fixed-size array of strings to which the LD_AUDIT environment variable and --audit arguments are added. Also eliminate the global variables for the audit list because the list is only needed briefly during startup. There is a slight behavior change: All duplicate LD_AUDIT environment variables are now processed, not just the last one as before. However, such environment vectors are invalid anyway. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* ld.so: Do not export free/calloc/malloc/realloc functions [BZ #25486]Florian Weimer2020-02-151-0/+12
| | | | | | | | | | | | | | | | | | | Exporting functions and relying on symbol interposition from libc.so makes the choice of implementation dependent on DT_NEEDED order, which is not what some compiler drivers expect. This commit replaces one magic mechanism (symbol interposition) with another one (preprocessor-/compiler-based redirection). This makes the hand-over from the minimal malloc to the full malloc more explicit. Removing the ABI symbols is backwards-compatible because libc.so is always in scope, and the dynamic loader will find the malloc-related symbols there since commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf: Move vDSO setup to rtld (BZ#24967)Adhemerval Zanella2020-01-031-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch moves the vDSO setup from libc to loader code, just after the vDSO link_map setup. For static case the initialization is moved to _dl_non_dynamic_init instead. Instead of using the mangled pointer, the vDSO data is set as attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for static). It is read-only even with partial relro. It fixes BZ#24967 now that the vDSO pointer is setup earlier than malloc interposition is called. Also, vDSO calls should not be a problem for static dlopen as indicated by BZ#20802. The vDSO pointer would be zero-initialized and the syscall will be issued instead. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and sparcv9-linux-gnu. I also run some tests on mips. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-011-1/+1
|
* Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]Florian Weimer2019-11-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This change splits the scope and TLS slotinfo updates in dlopen into two parts: one to resize the data structures, and one to actually apply the update. The call to add_to_global_resize in dl_open_worker is moved before the demarcation point at which no further memory allocations are allowed. _dl_add_to_slotinfo is adjusted to make the list update optional. There is some optimization possibility here because we could grow the slotinfo list of arrays in a single call, one the largest TLS modid is known. This commit does not fix the fatal meory allocation failure in _dl_update_slotinfo. Ideally, this error during dlopen should be recoverable. The update order of scopes and TLS data structures is retained, although it appears to be more correct to fully initialize TLS first, and then expose symbols in the newly loaded objects via the scope update. Tested on x86_64-linux-gnu. Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
* Introduce link_map_audit_state accessor functionFlorian Weimer2019-11-151-8/+10
| | | | | | | | | | | | To improve GCC 10 compatibility, it is necessary to remove the l_audit zero-length array from the end of struct link_map. In preparation of that, this commit introduces an accessor function for the audit state, so that it is possible to change the representation of the audit state without adjusting the code that accesses it. Tested on x86_64-linux-gnu. Built on i686-gnu. Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
* Properly initialize audit cookie for the dynamic loader [BZ #25157]Florian Weimer2019-11-151-7/+7
| | | | | | The l_audit array is indexed by audit module, not audit function. Change-Id: I180eb3573dc1c57433750f5d8cb18271460ba5f2
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Refactor hp-timing rtld usageAdhemerval Zanella2019-03-221-151/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor how hp-timing is used on loader code for statistics report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and HP_TIMING_INLINE is used instead to check for hp-timing avaliability. For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE is set iff for IS_IN(rtld). Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked the builds for all afected ABIs. * benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with HP_TIMING_INLINE. * nptl/descr.h: Likewise. * elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF, RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define. (dl_start_final_info, _dl_start_final, dl_main, print_statistics): Abstract hp-timing usage with RTLD_* macros. * sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld). (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove. * sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL, HP_TIMING_NONAVAIL): Likewise. * sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Likewise. * sysdeps/generic/hp-timing-common.h: Update comment with HP_TIMING_AVAIL removal.
* nptl: Remove pthread_clock_gettime pthread_clock_settimeAdhemerval Zanella2019-03-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support from clock_gettime and clock_settime generic implementation. For Linux, kernel already provides supports through the syscall and Hurd HTL lacks __pthread_clock_gettime and __pthread_clock_settime internal implementation. As described in clock_gettime man-page [1] on 'Historical note for SMP system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers is error-prone and susceptible to timing and accurary issues that the libc can not deal without kernel support. This allows removes unused code which, however, still incur in some runtime overhead in thread creation (the struct pthread cpuclock_offset initialization). If hurd eventually wants to support them it should either either implement as a kernel facility (or something related due its architecture) or in system specific implementation. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked on a i686-gnu build. * nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and pthread_clock_settime. * nptl/pthreadP.h (__find_thread_by_id): Remove prototype. * elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. (_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting. * elf/rtld.c (_dl_start_final): Likewise. * nptl/allocatestack.c (__find_thread_by_id): Remove function. * sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * nptl/descr.h (struct pthread): Rename cpuclock_offset to cpuclock_offset_ununsed. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove cpuclock_offset set. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * nptl/pthread_clock_gettime.c: Remove file. * nptl/pthread_clock_settime.c: Likewise. * sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function. [HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support. * sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise. [HP_TIMING_AVAIL] (realtime_gettime): Likewise. * sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise. [HP_TIMING_AVAIL] (__clock_getres): Likewise. * sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P): Likewise. (__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage. [1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
* Break some lines before not after operators.Joseph Myers2019-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GNU Coding Standards specify that line breaks in expressions should go before an operator, not after one. This patch fixes various code to do this. It only changes code that appears to be mostly following GNU style anyway, not files and directories with substantially different formatting. It is not exhaustive even for files using GNU style (for example, changes to sysdeps files are deferred for subsequent cleanups). Some files changed are shared with gnulib, but most are specific to glibc. Changes were made manually, with places to change found by grep (so some cases, e.g. where the operator was followed by a comment at end of line, are particularly liable to have been missed by grep, but I did include cases where the operator was followed by backslash-newline). This patch generally does not attempt to address other coding style issues in the expressions changed (for example, missing spaces before '(', or lack of parentheses to ensure indentation of continuation lines properly reflects operator precedence). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-memmem.c (simple_memmem): Break lines before rather than after operators. * benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise. * crypt/md5.c (md5_finish_ctx): Likewise. * crypt/sha256.c (__sha256_finish_ctx): Likewise. * crypt/sha512.c (__sha512_finish_ctx): Likewise. * elf/cache.c (load_aux_cache): Likewise. * elf/dl-load.c (open_verify): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * elf/readelflib.c (process_elf_file): Likewise. * elf/rtld.c (dl_main): Likewise. * elf/sprof.c (generate_call_graph): Likewise. * hurd/ctty-input.c (_hurd_ctty_input): Likewise. * hurd/ctty-output.c (_hurd_ctty_output): Likewise. * hurd/dtable.c (reauth_dtable): Likewise. * hurd/getdport.c (__getdport): Likewise. * hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise. * hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise. * hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise): Likewise. * hurd/hurdioctl.c (fioctl): Likewise. * hurd/hurdselect.c (_hurd_select): Likewise. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise. (STOPSIGS): Likewise. * hurd/hurdstartup.c (_hurd_startup): Likewise. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/msgportdemux.c (msgport_server): Likewise. * hurd/setauth.c (_hurd_setauth): Likewise. * include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise. * libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise. * locale/programs/ld-ctype.c (set_class_defaults): Likewise. * localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise. * login/tst-utmp.c (do_check): Likewise. (simulate_login): Likewise. * mach/lowlevellock.h (lll_lock): Likewise. (lll_trylock): Likewise. * math/test-fenv.c (ALL_EXC): Likewise. * math/test-fenvinline.c (ALL_EXC): Likewise. * misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise. * nis/nis_call.c (__do_niscall3): Likewise. * nis/nis_callback.c (cb_prog_1): Likewise. * nis/nis_defaults.c (searchaccess): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nis/nis_ismember.c (internal_ismember): Likewise. * nis/nis_local_names.c (nis_local_principal): Likewise. * nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise. * nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r): Likewise. * nis/ypclnt.c (yp_match): Likewise. (yp_first): Likewise. (yp_next): Likewise. (yp_master): Likewise. (yp_order): Likewise. * nscd/hstcache.c (cache_addhst): Likewise. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise. * posix/glob.h (__GLOB_FLAGS): Likewise. * posix/regcomp.c (peek_token): Likewise. (peek_token_bracket): Likewise. (parse_expression): Likewise. * posix/regexec.c (sift_states_iter_mb): Likewise. (check_node_accept_bytes): Likewise. * posix/tst-spawn3.c (do_test): Likewise. * posix/wordexp-test.c (testit): Likewise. * posix/wordexp.c (parse_tilde): Likewise. (exec_comm): Likewise. * posix/wordexp.h (__WRDE_FLAGS): Likewise. * resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise. * setjmp/sigjmp.c (__sigjmp_save): Likewise. * stdio-common/printf_fp.c (__printf_fp_l): Likewise. * stdio-common/tst-fileno.c (do_test): Likewise. * stdio-common/vfprintf-internal.c (vfprintf): Likewise. * stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise. * stdlib/strtod_l.c (round_and_return): Likewise. (____STRTOF_INTERNAL): Likewise. * stdlib/tst-strfrom.h (TEST_STRFROM): Likewise. * string/strcspn.c (STRCSPN): Likewise. * string/test-memmem.c (simple_memmem): Likewise. * termios/tcsetattr.c (tcsetattr): Likewise. * time/alt_digit.c (_nl_parse_alt_digit): Likewise. * time/asctime.c (asctime_internal): Likewise. * time/strptime_l.c (__strptime_internal): Likewise. * time/sys/time.h (timercmp): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
* elf: Ignore LD_AUDIT interfaces if la_version returns 0 [BZ #24122]Florian Weimer2019-02-121-162/+200
| | | | | | | | | | | | | | | | | This change moves the audit module loading and early notification into separate functions out of dl_main. It restores the bug fix from commit 8e889c5da3c5981c5a46a93fec02de40131ac5a6 ("elf: Fix LD_AUDIT for modules with invalid version (BZ#24122)") which was reverted in commit 83e6b59625f45db1eee93e5684091f740c52a083 ("[elf] Revert 8e889c5da3 (BZ#24122)"). The actual bug fix is the separate error message for the case when la_version returns zero. The dynamic linker error message (which is NULL in this case) is no longer used. Based on the intended use of version zero (ignore this module due to explicit request), the message is only printed if debugging is enabled.
* Add fall-through comments.Joseph Myers2019-02-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds fall-through comments in some cases where -Wextra produces implicit-fallthrough warnings. The patch is non-exhaustive. Apart from architecture-specific code for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy code, probably should have such changes, but left to be dealt with separately), or places that already had comments about the fall-through but not matching the form expected by -Wimplicit-fallthrough=3 (the default level with -Wextra; my inclination is to adjust those comments to match rather than downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one place where I thought the implicit fallthrough was not correct and so should be handled separately as a bug fix. I think the key thing to consider in review of this patch is whether the fall-through is indeed intended and correct in each place where such a comment is added. Tested for x86_64. * elf/dl-exception.c (_dl_exception_create_format): Add fall-through comments. * elf/ldconfig.c (parse_conf_include): Likewise. * elf/rtld.c (print_statistics): Likewise. * locale/programs/charmap.c (parse_charmap): Likewise. * misc/mntent_r.c (__getmntent_r): Likewise. * posix/wordexp.c (parse_arith): Likewise. (parse_backtick): Likewise. * resolv/ns_ttl.c (ns_parse_ttl): Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
* elf: Implement --preload option for the dynamic linkerDavid Newall2019-02-041-5/+25
|
* [elf] Revert 8e889c5da3 (BZ#24122)Adhemerval Zanella2019-01-251-25/+5
| | | | | It triggers an invalid build issue on GCC8+ and does not covers all corner cases.
* elf: Fix LD_AUDIT for modules with invalid version (BZ#24122)Adhemerval Zanella2019-01-241-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error handling patch for invalid audit modules version access invalid memory: elf/rtld.c: 1454 unsigned int (*laversion) (unsigned int); 1455 unsigned int lav; 1456 if (err_str == NULL 1457 && (laversion = largs.result) != NULL 1458 && (lav = laversion (LAV_CURRENT)) > 0 1459 && lav <= LAV_CURRENT) 1460 { [...] 1526 else 1527 { 1528 /* We cannot use the DSO, it does not have the 1529 appropriate interfaces or it expects something 1530 more recent. */ 1531 #ifndef NDEBUG 1532 Lmid_t ns = dlmargs.map->l_ns; 1533 #endif 1534 _dl_close (dlmargs.map); 1535 1536 /* Make sure the namespace has been cleared entirely. */ 1537 assert (GL(dl_ns)[ns]._ns_loaded == NULL); 1538 assert (GL(dl_ns)[ns]._ns_nloaded == 0); 1539 1540 GL(dl_tls_max_dtv_idx) = tls_idx; 1541 goto not_loaded; 1542 } 1431 const char *err_str = NULL; 1432 bool malloced; 1433 (void) _dl_catch_error (&objname, &err_str, &malloced, dlmopen_doit, 1434 &dlmargs); 1435 if (__glibc_unlikely (err_str != NULL)) 1436 { 1437 not_loaded: 1438 _dl_error_printf ("\ 1439 ERROR: ld.so: object '%s' cannot be loaded as audit interface: %s; ignored.\n", 1440 name, err_str); 1441 if (malloced) 1442 free ((char *) err_str); 1443 } On failure the err_str will be NULL and _dl_debug_vdprintf does not handle it properly: elf/dl-misc.c: 200 case 's': 201 /* Get the string argument. */ 202 iov[niov].iov_base = va_arg (arg, char *); 203 iov[niov].iov_len = strlen (iov[niov].iov_base); 204 if (prec != -1) 205 iov[niov].iov_len = MIN ((size_t) prec, iov[niov].iov_len); 206 ++niov; 207 break; This patch fixes the issues and improves the error message. Checked on x86_64-linux-gnu and i686-linux-gnu [BZ #24122] * elf/Makefile (tests): Add tst-audit13. (modules-names): Add tst-audit13mod1. (tst-audit13.out, LDFLAGS-tst-audit13mod1.so, tst-audit13-ENV): New rule. * elf/rtld.c (dl_main): Handle invalid audit module version. * elf/tst-audit13.c: New file. * elf/tst-audit13mod1.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* x86: Support IBT and SHSTK in Intel CET [BZ #21598]H.J. Lu2018-07-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en forcement-technology-preview.pdf includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK). GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on output only if it is set on all relocatable inputs. On an IBT capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable IBT and lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable. 2. When loading an executable with an interpreter, enable IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable, disable IBT. b. Lock IBT. 3. If IBT is enabled, when loading a shared object without GNU_PROPERTY_X86_FEATURE_1_IBT: a. If legacy interwork is allowed, then mark all pages in executable PT_LOAD segments in legacy code page bitmap. Failure of legacy code page bitmap allocation causes an error. b. If legacy interwork isn't allowed, it causes an error. GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK on output only if it is set on all relocatable inputs. On a SHSTK capable processor, the following steps should be taken: 1. When loading an executable without an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable. 2. When loading an executable with an interpreter, enable SHSTK if GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter. a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable or any shared objects loaded via the DT_NEEDED tag, disable SHSTK. b. Otherwise lock SHSTK. 3. After SHSTK is enabled, it is an error to load a shared object without GNU_PROPERTY_X86_FEATURE_1_SHSTK. To enable CET support in glibc, --enable-cet is required to configure glibc. When CET is enabled, both compiler and assembler must support CET. Otherwise, it is a configure-time error. To support CET run-time control, 1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate if IBT or SHSTK are enabled at run-time. It should be initialized by init_cpu_features. 2. For dynamic executables: a. A l_cet field is added to struct link_map to indicate if IBT or SHSTK is enabled in an ELF module. _dl_process_pt_note or _rtld_process_pt_note is called to process PT_NOTE segment for GNU program property and set l_cet. b. _dl_open_check is added to check IBT and SHSTK compatibilty when dlopening a shared object. 3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if SHSTK is enabled. CET run-time control can be changed via GLIBC_TUNABLES with $ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off] $ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off] 1. permissive: SHSTK is disabled when dlopening a legacy ELF module. 2. on: IBT or SHSTK are always enabled, regardless if there are IBT or SHSTK bits in GNU program property. 3. off: IBT or SHSTK are always disabled, regardless if there are IBT or SHSTK bits in GNU program property. <cet.h> from CET-enabled GCC is automatically included by assembly codes to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK to GNU program property. _CET_ENDBR is added at the entrance of all assembly functions whose address may be taken. _CET_NOTRACK is used to insert NOTRACK prefix with indirect jump table to support IBT. It is defined as notrack when _CET_NOTRACK is defined in <cet.h>. [BZ #21598] * configure.ac: Add --enable-cet. * configure: Regenerated. * elf/Makefille (all-built-dso): Add a comment. * elf/dl-load.c (filebuf): Moved before "dynamic-link.h". Include <dl-prop.h>. (_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE segment. * elf/dl-open.c: Include <dl-prop.h>. (dl_open_worker): Call _dl_open_check. * elf/rtld.c: Include <dl-prop.h>. (dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call _rtld_main_check. * sysdeps/generic/dl-prop.h: New file. * sysdeps/i386/dl-cet.c: Likewise. * sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise. * sysdeps/x86/cet-tunables.h: Likewise. * sysdeps/x86/check-cet.awk: Likewise. * sysdeps/x86/configure: Likewise. * sysdeps/x86/configure.ac: Likewise. * sysdeps/x86/dl-cet.c: Likewise. * sysdeps/x86/dl-procruntime.c: Likewise. * sysdeps/x86/dl-prop.h: Likewise. * sysdeps/x86/libc-start.h: Likewise. * sysdeps/x86/link_map.h: Likewise. * sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise. (_dl_runtime_resolve_shstk): New. (_dl_runtime_profile_shstk): Likewise. * sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet if CET is enabled. (CFLAGS-.o): Add -fcf-protection if CET is enabled. (CFLAGS-.os): Likewise. (CFLAGS-.op): Likewise. (CFLAGS-.oS): Likewise. (asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET is enabled. (tests-special): Add $(objpfx)check-cet.out. (cet-built-dso): New. (+$(cet-built-dso:=.note)): Likewise. (common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note). ($(objpfx)check-cet.out): New. (generated): Add check-cet.out. * sysdeps/x86/cpu-features.c: Include <dl-cet.h> and <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New prototype. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. (init_cpu_features): Call get_cet_status to check CET status and update dl_x86_feature_1 with CET status. Call TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK (set_x86_shstk). Disable and lock CET in libc.a. * sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>. (TUNABLE_CALLBACK (set_x86_ibt)): New function. (TUNABLE_CALLBACK (set_x86_shstk)): Likewise. * sysdeps/x86/sysdep.h (_CET_NOTRACK): New. (_CET_ENDBR): Define if not defined. (ENTRY): Add _CET_ENDBR. * sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and x86_shstk. * sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add _CET_ENDBR. (_dl_runtime_profile): Likewise.
* Avoid cancellable I/O primitives in ld.so.Zack Weinberg2018-06-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor initial shared library load-up, are cancellation points, so ld.so should exclusively use I/O primitives that are not cancellable. We currently achieve this by having the cancellation hooks compile as no-ops when IS_IN(rtld); this patch changes to using exclusively _nocancel primitives in the source code instead, which makes the intent clearer and significantly reduces the amount of code compiled under IS_IN(rtld) as well as IS_IN(libc) -- in particular, elf/Makefile no longer thinks we require a copy of unwind.c in rtld-libc.a. (The older mechanism is preserved as a backstop.) The bulk of the change is splitting up the files that define the _nocancel I/O functions, so they don't also define the variants that *are* cancellation points; after which, the existing logic for picking out the bits of libc that need to be recompiled as part of ld.so Just Works. I did this for all of the _nocancel functions, not just the ones used by ld.so, for consistency. fcntl was a little tricky because it's only a cancellation point for certain opcodes (F_SETLKW(64), which can block), and the existing __fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which strikes me as asking for trouble, especially as the only nontrivial definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes. To fix this, fcntl_common moves to fcntl_nocancel.c along with __fcntl_nocancel, and changes its name to the extern (but hidden) symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to .../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro that calls an inline function. The nptl version of libpthread also changes a little, because its "compat-routines" formerly included files that defined all the _nocancel functions it uses; instead of continuing to duplicate them, I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no longer be used from libpthread.so; instead, introduce a custom forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork() in libpthread, and it was handling that by manipulating libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do what other such ports do, and have a pt-vfork.S that defines no symbols. Right now, it appears that Hurd does not implement _nocancel I/O, so sysdeps/generic/not-cancel.h will forward everything back to the regular functions. This changed the names of some of the functions that sysdeps/mach/hurd/dl-sysdep.c needs to interpose. * elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c * sysdeps/unix/sysv/linux/dl-sysdep.c Include not-cancel.h. Use __close_nocancel instead of __close, __open64_nocancel instead of __open, __read_nocancel instead of __libc_read, and __write_nocancel instead of __libc_write. * csu/check_fds.c (check_one_fd) * sysdeps/posix/fdopendir.c (__fdopendir) * sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel instead of __fcntl and/or __libc_fcntl. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np) * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np) * sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system): Use __open64_nocancel instead of __open_nocancel. * sysdeps/unix/sysv/linux/not-cancel.h: Move all of the hidden_proto declarations to the end and issue them if either IS_IN(libc) or IS_IN(rtld). * sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines): Add close_nocancel, fcntl_nocancel, nanosleep_nocancel, open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel, read_nocancel, waitpid_nocancel, write_nocancel. * io/Versions [GLIBC_PRIVATE]: Add __libc_fcntl, __fcntl_nocancel, __open64_nocancel, __write_nocancel. * posix/Versions: Add __nanosleep_nocancel, __pause_nocancel. * nptl/pt-fcntl.c: New file. * nptl/Makefile (pthread-compat-wrappers): Remove fcntl. (libpthread-routines): Add pt-fcntl. * include/fcntl.h (__fcntl_nocancel_adjusted): New function. (__libc_fcntl): Remove attribute_hidden. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Call __fcntl_nocancel_adjusted, not fcntl_common. (__fcntl_nocancel): Move to new file fcntl_nocancel.c. (fcntl_common): Rename to __fcntl_nocancel_adjusted; also move to fcntl_nocancel.c. * sysdeps/unix/sysv/linux/fcntl_nocancel.c: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Remove file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define FCNTL_ADJUST_CMD here, as a self-contained macro. * sysdeps/unix/sysv/linux/close.c: Move __close_nocancel to... * sysdeps/unix/sysv/linux/close_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/nanosleep.c: Move __nanosleep_nocancel to... * sysdeps/unix/sysv/linux/nanosleep_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/open.c: Move __open_nocancel to... * sysdeps/unix/sysv/linux/open_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/open64.c: Move __open64_nocancel to... * sysdeps/unix/sysv/linux/open64_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/openat.c: Move __openat_nocancel to... * sysdeps/unix/sysv/linux/openat_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/openat64.c: Move __openat64_nocancel to... * sysdeps/unix/sysv/linux/openat64_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/pause.c: Move __pause_nocancel to... * sysdeps/unix/sysv/linux/pause_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/read.c: Move __read_nocancel to... * sysdeps/unix/sysv/linux/read_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/waitpid.c: Move __waitpid_nocancel to... * sysdeps/unix/sysv/linux/waitpid_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/write.c: Move __write_nocancel to... * sysdeps/unix/sysv/linux/write_nocancel.c: ...this new file. * sysdeps/unix/sysv/linux/nios2/Makefile: Don't override libpthread-routines. * sysdeps/unix/sysv/linux/nios2/pt-vfork.S: New file which defines nothing. * sysdeps/mach/hurd/dl-sysdep.c: Define __read instead of __libc_read, and __write instead of __libc_write. Define __open64 in addition to __open.
* elf: Unify symbol address run-time calculation [BZ #19818]Maciej W. Rozycki2018-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap symbol address run-time calculation into a macro and use it throughout, replacing inline calculations. There are a couple of variants, most of them different in a functionally insignificant way. Most calculations are right following RESOLVE_MAP, at which point either the map or the symbol returned can be checked for validity as the macro sets either both or neither. In some places both the symbol and the map has to be checked however. My initial implementation therefore always checked both, however that resulted in code larger by as much as 0.3%, as many places know from elsewhere that no check is needed. I have decided the size growth was unacceptable. Having looked closer I realized that it's the map that is the culprit. Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional boolean argument telling it to access the map without checking it for validity. This in turn has brought quite nice results, with new code actually being smaller for i686, and MIPS o32, n32 and little-endian n64 targets, unchanged in size for x86-64 and, unusually, marginally larger for big-endian MIPS n64, as follows: i686: text data bss dec hex filename 152255 4052 192 156499 26353 ld-2.27.9000-base.so 152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so MIPS/o32/el: text data bss dec hex filename 142906 4396 260 147562 2406a ld-2.27.9000-base.so 142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so MIPS/n32/el: text data bss dec hex filename 142267 4404 260 146931 23df3 ld-2.27.9000-base.so 142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so MIPS/n64/el: text data bss dec hex filename 149835 7376 408 157619 267b3 ld-2.27.9000-base.so 149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so MIPS/o32/eb: text data bss dec hex filename 142870 4396 260 147526 24046 ld-2.27.9000-base.so 142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so MIPS/n32/eb: text data bss dec hex filename 142019 4404 260 146683 23cfb ld-2.27.9000-base.so 141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so MIPS/n64/eb: text data bss dec hex filename 149763 7376 408 157547 2676b ld-2.27.9000-base.so 149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so x86-64: text data bss dec hex filename 148462 6452 400 155314 25eb2 ld-2.27.9000-base.so 148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so [BZ #19818] * sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set' parameter. (SYMBOL_ADDRESS): New macro. [!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use SYMBOL_ADDRESS for symbol address calculation. * elf/dl-runtime.c (_dl_fixup): Likewise. (_dl_profile_fixup): Likewise. * elf/dl-symaddr.c (_dl_symbol_address): Likewise. * elf/rtld.c (dl_main): Likewise. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. (elf_machine_reloc): Likewise. (elf_machine_got_rel): Likewise. * sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* elf: Remove ad-hoc restrictions on dlopen callers [BZ #22787]Florian Weimer2018-02-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | This looks like a post-exploitation hardening measure: If an attacker is able to redirect execution flow, they could use that to load a DSO which contains additional code (or perhaps make the stack executable). However, the checks are not in the correct place to be effective: If they are performed before the critical operation, an attacker with sufficient control over execution flow could simply jump directly to the code which performs the operation, bypassing the check. The check would have to be executed unconditionally after the operation and terminate the process in case a caller violation was detected. Furthermore, in _dl_check_caller, there was a fallback reading global writable data (GL(dl_rtld_map).l_map_start and GL(dl_rtld_map).l_text_end), which could conceivably be targeted by an attacker to disable the check, too. Other critical functions (such as system) remain completely unprotected, so the value of these additional checks does not appear that large. Therefore this commit removes this functionality.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* ld.so: Examine GLRO to detect inactive loader [BZ #20204]Florian Weimer2017-12-181-1/+3
| | | | | | | | | | | | GLRO (_rtld_global_ro) is read-only after initialization and can therefore not be patched at run time, unlike the hook table addresses and their contents, so this is a desirable hardening feature. The hooks are only needed if ld.so has not been initialized, and this happens only after static dlopen (dlmopen uses a single ld.so object across all namespaces). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* elf/rtld.c (init_tls): Add missing new line to the _dl_fatal_printf call [BZ ↵Aurelien Jarno2017-12-101-1/+1
| | | | | | | | #22577] Changelog: * elf/rtld.c (init_tls): Add missing new line to the _dl_fatal_printf call.
* ld.so: Replace (&bootstrap_map) with BOOTSTRAP_MAPH.J. Lu2017-10-031-1/+2
| | | | | | | | | | | | | | | (&_dl_main_map) is used instead of (&bootstrap_map) to bootstrap static PIE. Define BOOTSTRAP_MAP with (&_dl_main_map) to avoid hardcode to (&bootstrap_map). * elf/rtld.c (BOOTSTRAP_MAP): New. (RESOLVE_MAP): Replace (&bootstrap_map) with BOOTSTRAP_MAP. * sysdeps/hppa/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. * sysdeps/ia64/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise.
* _dl_start: Remove internal_function attributeFlorian Weimer2017-08-141-1/+1
| | | | | The i386 startup code needs adjusting because it calls the function and the ABI has changed.
* powerpc: Fix float128 IFUNC relocations [BZ #21707]Tulio Magno Quites Machado Filho2017-07-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch proposed by Peter Bergner [1] to libgcc in order to fix [BZ #21707] adds a dependency on a symbol provided by the loader, forcing the loader to be linked to tests after libgcc was linked. It also requires to read the thread pointer during IRELA relocations. Tested on powerpc, powerpc64, powerpc64le, s390x and x86_64. [1] https://sourceware.org/ml/libc-alpha/2017-06/msg01383.html [BZ #21707] * csu/libc-start.c (LIBC_START_MAIN): Perform IREL{,A} relocations before or after initializing the TCB on statically linked executables. That's a per-architecture definition. * elf/rtld.c (dl_main): Add a comment about thread-local variables initialization. * sysdeps/generic/libc-start.h: New file. Define ARCH_APPLY_IREL and ARCH_SETUP_IREL. * sysdeps/powerpc/Makefile: [$(subdir) = elf && $(multi-arch) != no] (tests-static-internal): Add tst-tlsifunc-static. [$(subdir) = elf && $(multi-arch) != no && $(build-shared) == yes] (tests-internal): Add tst-tlsifunc. * sysdeps/powerpc/tst-tlsifunc.c: New file. * sysdeps/powerpc/tst-tlsifunc-static.c: Likewise. * sysdeps/powerpc/powerpc64le/Makefile (f128-loader-link): New variable. [$(subdir) = math] (test-float128% test-ifloat128%): Force linking to the loader after linking to libgcc. [$(subdir) = wcsmbs || $(subdir) = stdlib] (bug-strtod bug-strtod2) (bug-strtod2 tst-strtod-round tst-wcstod-round tst-strtod6 tst-strrom) (tst-strfrom-locale strfrom-skeleton): Likewise. * sysdeps/unix/sysv/linux/powerpc/libc-start.h: New file. Define ARCH_APPLY_IREL and ARCH_SETUP_IREL.
* ld.so: Reject overly long LD_AUDIT path elementsFlorian Weimer2017-06-191-15/+95
| | | | Also only process the last LD_AUDIT entry.
* ld.so: Reject overly long LD_PRELOAD path elementsFlorian Weimer2017-06-191-16/+66
|
* CVE-2017-1000366: Ignore LD_LIBRARY_PATH for AT_SECURE=1 programs [BZ #21624]Florian Weimer2017-06-191-1/+2
| | | | | | | | LD_LIBRARY_PATH can only be used to reorder system search paths, which is not useful functionality. This makes an exploitable unbounded alloca in _dl_init_paths unreachable for AT_SECURE=1 programs.
* ld.so: Consolidate 2 strtouls into _dl_strtoul [BZ #21528]H.J. Lu2017-06-081-2/+1
| | | | | | | | | | | | | | | | | | | | | There are 2 minimal strtoul implementations in ld.so: 1. __strtoul_internal in elf/dl-minimal.c. 2. tunables_strtoul in elf/dl-tunables.c. This patch adds _dl_strtoul to replace them. Tested builds with and without --enable-tunables. [BZ #21528] * elf/dl-minimal.c (__strtoul_internal): Removed. (strtoul): Likewise. * elf/dl-misc.c (_dl_strtoul): New function. * elf/dl-tunables.c (tunables_strtoul): Removed. (tunable_initialize): Replace tunables_strtoul with _dl_strtoul. * elf/rtld.c (process_envvars): Likewise. * sysdeps/unix/sysv/linux/dl-librecon.h (_dl_osversion_init): Likewise. * sysdeps/generic/ldsodefs.h (_dl_strtoul): New prototype.
* tunables: Use glibc.tune.hwcap_mask tunable instead of _dl_hwcap_maskSiddhesh Poyarekar2017-06-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Drop _dl_hwcap_mask when building with tunables. This completes the transition of hwcap_mask reading from _dl_hwcap_mask to tunables. * elf/dl-hwcaps.h: New file. * elf/dl-hwcaps.c: Include it. (_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update glibc.tune.hwcap_mask. * elf/dl-cache.c: Include dl-hwcaps.h. (_dl_load_cache_lookup)[HAVE_TUNABLES]: Read glibc.tune.hwcap_mask. * sysdeps/sparc/sparc32/dl-machine.h: Likewise. * elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. * elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop _dl_hwcap_mask. (process_envvars)[HAVE_TUNABLES]: Likewise. * sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]: Likewise. * sysdeps/x86/cpu-features.c (init_cpu_features): Don't initialize dl_hwcap_mask when tunables are enabled.
* Assume that O_NOFOLLOW is always definedFlorian Weimer2017-04-131-4/+0
|
* Ignore and remove LD_HWCAP_MASK for AT_SECURE programs (bug #21209)Siddhesh Poyarekar2017-03-071-1/+2
| | | | | | | | | | | | | | | | | | | The LD_HWCAP_MASK environment variable may alter the selection of function variants for some architectures. For AT_SECURE process it means that if an outdated routine has a bug that would otherwise not affect newer platforms by default, LD_HWCAP_MASK will allow that bug to be exploited. To be on the safe side, ignore and disable LD_HWCAP_MASK for setuid binaries. [BZ #21209] * elf/rtld.c (process_envvars): Ignore LD_HWCAP_MASK for AT_SECURE processes. * sysdeps/generic/unsecvars.h: Add LD_HWCAP_MASK. * elf/tst-env-setuid.c (test_parent): Test LD_HWCAP_MASK. (test_child): Likewise. * elf/Makefile (tst-env-setuid-ENV): Add LD_HWCAP_MASK.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Add framework for tunablesSiddhesh Poyarekar2016-12-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tunables framework allows us to uniformly manage and expose global variables inside glibc as switches to users. tunables/README has instructions for glibc developers to add new tunables. Tunables support can be enabled by passing the --enable-tunables configure flag to the configure script. This patch only adds a framework and does not pose any limitations on how tunable values are read from the user. It also adds environment variables used in malloc behaviour tweaking to the tunables framework as a PoC of the compatibility interface. * manual/install.texi: Add --enable-tunables option. * INSTALL: Regenerate. * README.tunables: New file. * Makeconfig (CPPFLAGS): Define TOP_NAMESPACE. (before-compile): Generate dl-tunable-list.h early. * config.h.in: Add HAVE_TUNABLES. * config.make.in: Add have-tunables. * configure.ac: Add --enable-tunables option. * configure: Regenerate. * csu/init-first.c (__libc_init_first): Move __libc_init_secure earlier... * csu/init-first.c (LIBC_START_MAIN):... to here. Include dl-tunables.h, libc-internal.h. (LIBC_START_MAIN) [!SHARED]: Initialize tunables for static binaries. * elf/Makefile (dl-routines): Add dl-tunables. * elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE namespace. * elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_ only when !HAVE_TUNABLES. * elf/rtld.c (process_envvars): Likewise. * elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h (_dl_sysdep_start): Call __tunables_init. * elf/dl-tunable-types.h: New file. * elf/dl-tunables.c: New file. * elf/dl-tunables.h: New file. * elf/dl-tunables.list: New file. * malloc/tst-malloc-usable-static.c: New test case. * malloc/Makefile (tests-static): Add it. * malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h. Define TUNABLE_NAMESPACE. (DL_TUNABLE_CALLBACK (set_mallopt_check)): New function. (DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define callback functions. (ptmalloc_init): Set tunable values. * scripts/gen-tunables.awk: New file. * sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h. (_dl_sysdep_start): Call __tunables_init.
* Implement _dl_catch_error, _dl_signal_error in libc.so [BZ #16628]Florian Weimer2016-11-301-19/+0
| | | | | | | | | | | | | | | | | | This change moves the main implementation of _dl_catch_error, _dl_signal_error to libc.so, where TLS variables can be used directly. This removes a writable function pointer from the rtld_global variable. For use during initial relocation, minimal implementations of these functions are provided in ld.so. These are eventually interposed by the libc.so implementations. This is implemented by compiling elf/dl-error-skeleton.c twice, via elf/dl-error.c and elf/dl-error-minimal.c. As a side effect of this change, the static version of dl-error.c no longer includes support for the _dl_signal_cerror/_dl_receive_error mechanism because it is only used in ld.so.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Always enable pointer guard [BZ #18928]Florian Weimer2015-10-151-11/+4
| | | | | | | | | | | | | | Honoring the LD_POINTER_GUARD environment variable in AT_SECURE mode has security implications. This commit enables pointer guard unconditionally, and the environment variable is now ignored. [BZ #18928] * sysdeps/generic/ldsodefs.h (struct rtld_global_ro): Remove _dl_pointer_guard member. * elf/rtld.c (_rtld_global_ro): Remove _dl_pointer_guard initializer. (security_init): Always set up pointer guard. (process_envvars): Do not process LD_POINTER_GUARD.
* Move bits/libc-lock.h and bits/libc-lockP.h out of bits/ (bug 14912).Joseph Myers2015-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/libc-lock.h to plain libc-lock.h and bits/libc-lockP.h to plain libc-lockP.h to follow that convention. Note that I don't know where libc-lockP.h comes from for Hurd (the Hurd libc-lock.h includes libc-lockP.h, but the only libc-lockP.h in the glibc source tree is for NPTL) - some unmerged patch? - but I updated the #include in the Hurd libc-lock.h anyway. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * bits/libc-lock.h: Move to ... * sysdeps/generic/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/mach/hurd/bits/libc-lock.h: Move to ... * sysdeps/mach/hurd/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. [_LIBC]: Include <libc-lockP.h> instead of <bits/libc-lockP.h>. * sysdeps/mach/bits/libc-lock.h: Move to ... * sysdeps/mach/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lock.h: Move to ... * sysdeps/nptl/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lockP.h: Move to ... * sysdeps/nptl/libc-lockP.h: ...here. (_BITS_LIBC_LOCKP_H): Rename macro to _LIBC_LOCKP_H. * crypt/crypt_util.c: Include <libc-lock.h> instead of <bits/libc-lock.h>. * dirent/scandir-tail.c: Likewise. * dlfcn/dlerror.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-iteratephdr.c: Likewise. * elf/dl-lookup.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-support.c: Likewise. * elf/dl-writev.h: Likewise. * elf/rtld.c: Likewise. * grp/fgetgrent.c: Likewise. * gshadow/fgetsgent.c: Likewise. * gshadow/sgetsgent.c: Likewise. * iconv/gconv_conf.c: Likewise. * iconv/gconv_db.c: Likewise. * iconv/gconv_dl.c: Likewise. * iconv/gconv_int.h: Likewise. * iconv/gconv_trans.c: Likewise. * include/link.h: Likewise. * inet/getnameinfo.c: Likewise. * inet/getnetgrent.c: Likewise. * inet/getnetgrent_r.c: Likewise. * intl/bindtextdom.c: Likewise. * intl/dcigettext.c: Likewise. * intl/finddomain.c: Likewise. * intl/gettextP.h: Likewise. * intl/loadmsgcat.c: Likewise. * intl/localealias.c: Likewise. * intl/textdomain.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * locale/duplocale.c: Likewise. * locale/freelocale.c: Likewise. * locale/newlocale.c: Likewise. * locale/setlocale.c: Likewise. * login/getutent_r.c: Likewise. * login/getutid_r.c: Likewise. * login/getutline_r.c: Likewise. * login/utmp-private.h: Likewise. * login/utmpname.c: Likewise. * malloc/mtrace.c: Likewise. * misc/efgcvt.c: Likewise. * misc/error.c: Likewise. * misc/fstab.c: Likewise. * misc/getpass.c: Likewise. * misc/mntent.c: Likewise. * misc/syslog.c: Likewise. * nis/nis_call.c: Likewise. * nis/nis_callback.c: Likewise. * nis/nss-default.c: Likewise. * nis/nss_compat/compat-grp.c: Likewise. * nis/nss_compat/compat-initgroups.c: Likewise. * nis/nss_compat/compat-pwd.c: Likewise. * nis/nss_compat/compat-spwd.c: Likewise. * nis/nss_nis/nis-alias.c: Likewise. * nis/nss_nis/nis-ethers.c: Likewise. * nis/nss_nis/nis-grp.c: Likewise. * nis/nss_nis/nis-hosts.c: Likewise. * nis/nss_nis/nis-network.c: Likewise. * nis/nss_nis/nis-proto.c: Likewise. * nis/nss_nis/nis-pwd.c: Likewise. * nis/nss_nis/nis-rpc.c: Likewise. * nis/nss_nis/nis-service.c: Likewise. * nis/nss_nis/nis-spwd.c: Likewise. * nis/nss_nisplus/nisplus-alias.c: Likewise. * nis/nss_nisplus/nisplus-ethers.c: Likewise. * nis/nss_nisplus/nisplus-grp.c: Likewise. * nis/nss_nisplus/nisplus-hosts.c: Likewise. * nis/nss_nisplus/nisplus-initgroups.c: Likewise. * nis/nss_nisplus/nisplus-network.c: Likewise. * nis/nss_nisplus/nisplus-proto.c: Likewise. * nis/nss_nisplus/nisplus-pwd.c: Likewise. * nis/nss_nisplus/nisplus-rpc.c: Likewise. * nis/nss_nisplus/nisplus-service.c: Likewise. * nis/nss_nisplus/nisplus-spwd.c: Likewise. * nis/ypclnt.c: Likewise. * nptl/libc_pthread_init.c: Likewise. * nss/getXXbyYY.c: Likewise. * nss/getXXent.c: Likewise. * nss/getXXent_r.c: Likewise. * nss/nss_db/db-XXX.c: Likewise. * nss/nss_db/db-netgrp.c: Likewise. * nss/nss_db/nss_db.h: Likewise. * nss/nss_files/files-XXX.c: Likewise. * nss/nss_files/files-alias.c: Likewise. * nss/nsswitch.c: Likewise. * posix/regex_internal.h: Likewise. * posix/wordexp.c: Likewise. * pwd/fgetpwent.c: Likewise. * resolv/res_hconf.c: Likewise. * resolv/res_libc.c: Likewise. * shadow/fgetspent.c: Likewise. * shadow/lckpwdf.c: Likewise. * shadow/sgetspent.c: Likewise. * socket/opensock.c: Likewise. * stdio-common/reg-modifier.c: Likewise. * stdio-common/reg-printf.c: Likewise. * stdio-common/reg-type.c: Likewise. * stdio-common/vfprintf.c: Likewise. * stdio-common/vfscanf.c: Likewise. * stdlib/abort.c: Likewise. * stdlib/cxa_atexit.c: Likewise. * stdlib/fmtmsg.c: Likewise. * stdlib/random.c: Likewise. * stdlib/setenv.c: Likewise. * string/strsignal.c: Likewise. * sunrpc/auth_none.c: Likewise. * sunrpc/bindrsvprt.c: Likewise. * sunrpc/create_xid.c: Likewise. * sunrpc/key_call.c: Likewise. * sunrpc/rpc_thread.c: Likewise. * sysdeps/arm/backtrace.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/generic/stdio-lock.h: Likewise. * sysdeps/generic/unwind-dw2-fde.c: Likewise. * sysdeps/i386/backtrace.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Likewise. * sysdeps/m68k/backtrace.c: Likewise. * sysdeps/mach/hurd/cthreads.c: Likewise. * sysdeps/mach/hurd/dirstream.h: Likewise. * sysdeps/mach/hurd/malloc-machine.h: Likewise. * sysdeps/nptl/malloc-machine.h: Likewise. * sysdeps/nptl/stdio-lock.h: Likewise. * sysdeps/posix/dirstream.h: Likewise. * sysdeps/posix/getaddrinfo.c: Likewise. * sysdeps/posix/system.c: Likewise. * sysdeps/pthread/aio_suspend.c: Likewise. * sysdeps/s390/s390-32/backtrace.c: Likewise. * sysdeps/s390/s390-64/backtrace.c: Likewise. * sysdeps/unix/sysv/linux/check_pf.c: Likewise. * sysdeps/unix/sysv/linux/if_index.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutent_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutid_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutline_r.c: Likewise. * sysdeps/unix/sysv/linux/shm-directory.c: Likewise. * sysdeps/unix/sysv/linux/system.c: Likewise. * sysdeps/x86_64/backtrace.c: Likewise. * time/alt_digit.c: Likewise. * time/era.c: Likewise. * time/tzset.c: Likewise. * wcsmbs/wcsmbsload.c: Likewise. * nptl/tst-initializers1.c (do_test): Refer to <libc-lock.h> instead of <bits/libc-lock.h> in comment.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Constify string parametersAndreas Schwab2014-12-111-2/+2
|
* Remove INTDEF / INTUSE / INTVARDEF (bug 14132).Joseph Myers2014-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Completing the removal of the obsolete INTDEF / INTUSE mechanism, this patch removes the final use - that for _dl_starting_up - replacing it by rtld_hidden_def / rtld_hidden_proto. Having removed the last use, the mechanism itself is also removed. Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. (This is not much of a test since this variable is only defined and used in the !HAVE_INLINED_SYSCALLS case.) [BZ #14132] * include/libc-symbols.h (INTUSE): Remove macro. (INTDEF): Likewise. (INTVARDEF): Likewise. (_INTVARDEF): Likewise. (INTDEF2): Likewise. (INTVARDEF2): Likewise. * elf/rtld.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Use rtld_hidden_def instead of INTVARDEF. * sysdeps/generic/ldsodefs.h [IS_IN_rtld] (_dl_starting_up_internal): Remove declaration. (_dl_starting_up): Use rtld_hidden_proto. * elf/dl-init.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Remove declaration. [!HAVE_INLINED_SYSCALLS] (_dl_starting_up_internal): Likewise. (_dl_init) [!HAVE_INLINED_SYSCALLS]: Don't use INTUSE with _dl_starting_up. * elf/dl-writev.h (_dl_writev): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h [!HAVE_INLINED_SYSCALLS] (DL_STARTING_UP_DEF): Use __GI__dl_starting_up instead of _dl_starting_up_internal.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-18 21:03:50 +0000