about summary refs log tree commit diff
path: root/elf/get-dynamic-info.h
Commit message (Collapse)AuthorAgeFilesLines
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-011-1/+1
|
* dlopen: Rework handling of pending NODELETE statusFlorian Weimer2019-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a2e8aa0d9ea648068d8be52dd7b15f1b6a008e23 ("Block signals during the initial part of dlopen") was deemed necessary because of read-modify-write operations like the one in add_dependency in elf/dl-lookup.c. In the old code, we check for any kind of NODELETE status and bail out: /* Redo the NODELETE check, as when dl_load_lock wasn't held yet this could have changed. */ if (map->l_nodelete != link_map_nodelete_inactive) goto out; And then set pending status (during relocation): if (flags & DL_LOOKUP_FOR_RELOCATE) map->l_nodelete = link_map_nodelete_pending; else map->l_nodelete = link_map_nodelete_active; If a signal arrives during relocation and the signal handler, through lazy binding, adds a global scope dependency on the same map, it will set map->l_nodelete to link_map_nodelete_active. This will be overwritten with link_map_nodelete_pending by the dlopen relocation code. To avoid such problems in relation to the l_nodelete member, this commit introduces two flags for active NODELETE status (irrevocable) and pending NODELETE status (revocable until activate_nodelete is invoked). As a result, NODELETE processing in dlopen does not introduce further reasons why lazy binding from signal handlers is unsafe during dlopen, and a subsequent commit can remove signal blocking from dlopen. This does not address pre-existing issues (unrelated to the NODELETE changes) which make lazy binding in a signal handler during dlopen unsafe, such as the use of malloc in both cases. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Remove all loaded objects if dlopen fails, ignoring NODELETE [BZ #20839]Florian Weimer2019-11-271-0/+2
| | | | | | | | | | | | | This introduces a “pending NODELETE” state in the link map, which is flipped to the persistent NODELETE state late in dlopen, via activate_nodelete. During initial relocation, symbol binding records pending NODELETE state only. dlclose ignores pending NODELETE state. Taken together, this results that a partially completed dlopen is rolled back completely because new NODELETE mappings are unloaded. Tested on x86_64-linux-gnu and i386-linux-gnu. Change-Id: Ib2a3d86af6f92d75baca65431d74783ee0dbc292
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Break some lines before not after operators.Joseph Myers2019-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GNU Coding Standards specify that line breaks in expressions should go before an operator, not after one. This patch fixes various code to do this. It only changes code that appears to be mostly following GNU style anyway, not files and directories with substantially different formatting. It is not exhaustive even for files using GNU style (for example, changes to sysdeps files are deferred for subsequent cleanups). Some files changed are shared with gnulib, but most are specific to glibc. Changes were made manually, with places to change found by grep (so some cases, e.g. where the operator was followed by a comment at end of line, are particularly liable to have been missed by grep, but I did include cases where the operator was followed by backslash-newline). This patch generally does not attempt to address other coding style issues in the expressions changed (for example, missing spaces before '(', or lack of parentheses to ensure indentation of continuation lines properly reflects operator precedence). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-memmem.c (simple_memmem): Break lines before rather than after operators. * benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise. * crypt/md5.c (md5_finish_ctx): Likewise. * crypt/sha256.c (__sha256_finish_ctx): Likewise. * crypt/sha512.c (__sha512_finish_ctx): Likewise. * elf/cache.c (load_aux_cache): Likewise. * elf/dl-load.c (open_verify): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * elf/readelflib.c (process_elf_file): Likewise. * elf/rtld.c (dl_main): Likewise. * elf/sprof.c (generate_call_graph): Likewise. * hurd/ctty-input.c (_hurd_ctty_input): Likewise. * hurd/ctty-output.c (_hurd_ctty_output): Likewise. * hurd/dtable.c (reauth_dtable): Likewise. * hurd/getdport.c (__getdport): Likewise. * hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise. * hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise. * hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise): Likewise. * hurd/hurdioctl.c (fioctl): Likewise. * hurd/hurdselect.c (_hurd_select): Likewise. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise. (STOPSIGS): Likewise. * hurd/hurdstartup.c (_hurd_startup): Likewise. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/msgportdemux.c (msgport_server): Likewise. * hurd/setauth.c (_hurd_setauth): Likewise. * include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise. * libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise. * locale/programs/ld-ctype.c (set_class_defaults): Likewise. * localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise. * login/tst-utmp.c (do_check): Likewise. (simulate_login): Likewise. * mach/lowlevellock.h (lll_lock): Likewise. (lll_trylock): Likewise. * math/test-fenv.c (ALL_EXC): Likewise. * math/test-fenvinline.c (ALL_EXC): Likewise. * misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise. * nis/nis_call.c (__do_niscall3): Likewise. * nis/nis_callback.c (cb_prog_1): Likewise. * nis/nis_defaults.c (searchaccess): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nis/nis_ismember.c (internal_ismember): Likewise. * nis/nis_local_names.c (nis_local_principal): Likewise. * nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise. * nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r): Likewise. * nis/ypclnt.c (yp_match): Likewise. (yp_first): Likewise. (yp_next): Likewise. (yp_master): Likewise. (yp_order): Likewise. * nscd/hstcache.c (cache_addhst): Likewise. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise. * posix/glob.h (__GLOB_FLAGS): Likewise. * posix/regcomp.c (peek_token): Likewise. (peek_token_bracket): Likewise. (parse_expression): Likewise. * posix/regexec.c (sift_states_iter_mb): Likewise. (check_node_accept_bytes): Likewise. * posix/tst-spawn3.c (do_test): Likewise. * posix/wordexp-test.c (testit): Likewise. * posix/wordexp.c (parse_tilde): Likewise. (exec_comm): Likewise. * posix/wordexp.h (__WRDE_FLAGS): Likewise. * resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise. * setjmp/sigjmp.c (__sigjmp_save): Likewise. * stdio-common/printf_fp.c (__printf_fp_l): Likewise. * stdio-common/tst-fileno.c (do_test): Likewise. * stdio-common/vfprintf-internal.c (vfprintf): Likewise. * stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise. * stdlib/strtod_l.c (round_and_return): Likewise. (____STRTOF_INTERNAL): Likewise. * stdlib/tst-strfrom.h (TEST_STRFROM): Likewise. * string/strcspn.c (STRCSPN): Likewise. * string/test-memmem.c (simple_memmem): Likewise. * termios/tcsetattr.c (tcsetattr): Likewise. * time/alt_digit.c (_nl_parse_alt_digit): Likewise. * time/asctime.c (asctime_internal): Likewise. * time/strptime_l.c (__strptime_internal): Likewise. * time/sys/time.h (timercmp): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Use ADDRIDX with DT_GNU_HASHH.J. Lu2018-02-051-2/+1
| | | | | | | | | | The only differences in ld.so are line numbers for asserts. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> * elf/dl-addr.c (determine_info): Use ADDRIDX with DT_GNU_HASH. * elf/dl-lookup.c (_dl_setup_hash): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Add --enable-static-pie configure option to build static PIE [BZ #19574]H.J. Lu2017-12-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise.
* Remove header file inclusion guard from elf/get-dynamic-info.hFlorian Weimer2017-03-021-4/+2
| | | | | This file is included multiple times, so the guard is harmful. Fixes commit 9090848d0607e93fb08a1d68d9f263846ee33f02.
* Narrowing the visibility of libc-internal.h even further.Zack Weinberg2017-03-011-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar to what was done with libc-diag.h, I have split the definitions of cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN to a new header, libc-pointer-arith.h. It then occurred to me that the remaining declarations in libc-internal.h are mostly to do with early initialization, and probably most of the files including it, even in the core code, don't need it anymore. Indeed, only 19 files actually need what remains of libc-internal.h. 23 others need libc-diag.h instead, and 12 need libc-pointer-arith.h instead. No file needs more than one of them, and 16 don't need any of them! So, with this patch, libc-internal.h stops including libc-diag.h as well as losing the pointer arithmetic macros, and all including files are adjusted. * include/libc-pointer-arith.h: New file. Define cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN here. * include/libc-internal.h: Definitions of above macros moved from here. Don't include libc-diag.h anymore either. * posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h. Don't include libc-internal.h. * debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c * io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c * nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c * string/strcoll_l.c, sysdeps/nacl/brk.c * sysdeps/unix/clock_settime.c * sysdeps/unix/sysv/linux/i386/get_clockfreq.c * sysdeps/unix/sysv/linux/ia64/get_clockfreq.c * sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c * sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Don't include libc-internal.h. * elf/get-dynamic-info.h, iconv/loop.c * iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h * misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h * nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c * soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c * sysdeps/ieee754/dbl-64/e_lgamma_r.c * sysdeps/ieee754/dbl-64/k_rem_pio2.c * sysdeps/ieee754/flt-32/e_lgammaf_r.c * sysdeps/ieee754/flt-32/k_rem_pio2f.c * sysdeps/ieee754/ldbl-128/k_tanl.c * sysdeps/ieee754/ldbl-128ibm/k_tanl.c * sysdeps/ieee754/ldbl-96/e_lgammal_r.c * sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h: Include libc-diag.h instead of libc-internal.h. * elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c * nptl/nptl-init.c, string/strcspn.c, string/strspn.c * malloc/malloc.c, sysdeps/i386/nptl/tls.h * sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h * sysdeps/unix/sysv/linux/spawni.c * sysdeps/x86_64/nptl/tls.h: Include libc-pointer-arith.h instead of libc-internal.h. * elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h * sysdeps/x86_64/atomic-machine.h: Add multiple include guard.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Fix array bounds warnings in elf_get_dyanmic_info() on sparc with gcc-4.6David S. Miller2014-12-191-1/+10
| | | | | * get-dynamic-info.h (elf_get_dynamic_info): Ignore -Warray-bounds for a link_map->l_info array access.
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-011-1/+1
|
* Revert wrong commit.Adhemerval Zanella2013-12-051-2/+2
|
* Fix elf/get-dynamic-info.h for ATAdhemerval Zanella2013-12-051-2/+2
|
* Update copyright notices with scripts/update-copyrights.Joseph Myers2013-01-021-1/+1
|
* Warn about unsupported DT_FLAGS_1 flags.Carlos O'Donell2012-11-291-2/+10
| | | | | The dynamic loader will now warn about unsupported DT_FLAGS_1 flags when run with LD_DEBUG=files or LD_DEBUG=all.
* Check supported DF_1_XXX bitsH.J. Lu2012-11-211-0/+3
|
* Set up the data structures for vDSO in libc.aH.J. Lu2012-10-051-0/+161