about summary refs log tree commit diff
path: root/elf/dl-tls.c
Commit message (Collapse)AuthorAgeFilesLines
* elf, nptl: Initialize static TLS directly in ld.soFlorian Weimer2021-05-051-0/+39
| | | | | | | | | | The stack list is available in ld.so since commit 1daccf403b1bd86370eb94edca794dc106d02039 ("nptl: Move stack list variables into _rtld_global"), so it's possible to walk the stack list directly in ld.so and perform the initialization there. This eliminates an unprotected function pointer from _rtld_global and reduces the libpthread initialization code.
* elf: Refactor _dl_update_slotinfo to avoid use after freeSzabolcs Nagy2021-04-151-16/+5
| | | | | | | | | | | | map is not valid to access here because it can be freed by a concurrent dlclose: during tls access (via __tls_get_addr) _dl_update_slotinfo is called without holding dlopen locks. So don't check the modid of map. The map == 0 and map != 0 code paths can be shared (avoiding the dtv resize in case of map == 0 is just an optimization: larger dtv than necessary would be fine too). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* elf: Fix comments and logic in _dl_add_to_slotinfoSzabolcs Nagy2021-04-151-10/+1
| | | | | | | | | | | | | | | Since commit a509eb117fac1d764b15eba64993f4bdb63d7f3c Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112] the generation counter update is not needed in the failure path. That commit ensures allocation in _dl_add_to_slotinfo happens before the demarcation point in dlopen (it is called twice, first time is for allocation only where dlopen can still be reverted on failure, then second time actual dtv updates are done which then cannot fail). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* elf: Fix a DTV setup issue [BZ #27136]Szabolcs Nagy2021-04-151-1/+1
| | | | | | | | | | | The max modid is a valid index in the dtv, it should not be skipped. The bug is observable if the last module has modid == 64 and its generation is same or less than the max generation of the previous modules. Then dtv[0].counter implies dtv[64] is initialized but it isn't. Fixes bug 27136. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-021-1/+1
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* elf: Change TLS static surplus default back to 1664Florian Weimer2020-07-201-7/+30
| | | | | | | Make the computation in elf/dl-tls.c more transparent, and add an explicit test for the historic value. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Linux: Remove rseq supportFlorian Weimer2020-07-161-7/+1
| | | | | | | | | | | | | | | | | | The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* rtld: Avoid using up static TLS surplus for optimizations [BZ #25051]Szabolcs Nagy2020-07-081-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On some targets static TLS surplus area can be used opportunistically for dynamically loaded modules such that the TLS access then becomes faster (TLSDESC and powerpc TLS optimization). However we don't want all surplus TLS to be used for this optimization because dynamically loaded modules with initial-exec model TLS can only use surplus TLS. The new contract for surplus static TLS use is: - libc.so can have up to 192 bytes of IE TLS, - other system libraries together can have up to 144 bytes of IE TLS. - Some "optional" static TLS is available for opportunistic use. The optional TLS is now tunable: rtld.optional_static_tls, so users can directly affect the allocated static TLS size. (Note that module unloading with dlclose does not reclaim static TLS. After the optional TLS runs out, TLS access is no longer optimized to use static TLS.) The default setting of rtld.optional_static_tls is 512 so the surplus TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before. Fixes BZ #25051. Tested on aarch64-linux-gnu and x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* rtld: Account static TLS surplus for audit modulesSzabolcs Nagy2020-07-081-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The new static TLS surplus size computation is surplus_tls = 192 * (nns-1) + 144 * nns + 512 where nns is controlled via the rtld.nns tunable. This commit accounts audit modules too so nns = rtld.nns + audit modules. rtld.nns should only include the namespaces required by the application, namespaces for audit modules are accounted on top of that so audit modules don't use up the static TLS that is reserved for the application. This allows loading many audit modules without tuning rtld.nns or using up static TLS, and it fixes FAIL: elf/tst-auditmany Note that DL_NNS is currently a hard upper limit for nns, and if rtld.nns + audit modules go over the limit that's a fatal error. By default rtld.nns is 4 which allows 12 audit modules. Counting the audit modules is based on existing audit string parsing code, we cannot use GLRO(dl_naudit) before the modules are actually loaded.
* rtld: Add rtld.nns tunable for the number of supported namespacesSzabolcs Nagy2020-07-081-5/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to support DL_NNS (== 16) number of dynamic link namespaces, if we assume 192 bytes of TLS are reserved for libc use and 144 bytes are reserved for other system libraries that use IE TLS. A new tunable is introduced to control the number of supported namespaces and to adjust the surplus static TLS size as follows: surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512 The default is rtld.nns == 4 and then the surplus TLS size is the same as before, so the behaviour is unchanged by default. If an application creates more namespaces than the rtld.nns setting allows, then it is not guaranteed to work, but the limit is not checked. So existing usage will continue to work, but in the future if an application creates more than 4 dynamic link namespaces then the tunable will need to be set. In this patch DL_NNS is a fixed value and provides a maximum to the rtld.nns setting. Static linking used fixed 2048 bytes surplus TLS, this is changed so the same contract is used as for dynamic linking. With static linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by default the surplus TLS is reduced to 144 + 512 = 656 bytes. This change is not expected to cause problems. Tested on aarch64-linux-gnu and x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers2020-07-061-1/+7
| | | | | | | | | | | | | | | | | | | Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-011-1/+1
|
* Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]Florian Weimer2019-11-271-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | This change splits the scope and TLS slotinfo updates in dlopen into two parts: one to resize the data structures, and one to actually apply the update. The call to add_to_global_resize in dl_open_worker is moved before the demarcation point at which no further memory allocations are allowed. _dl_add_to_slotinfo is adjusted to make the list update optional. There is some optimization possibility here because we could grow the slotinfo list of arrays in a single call, one the largest TLS modid is known. This commit does not fix the fatal meory allocation failure in _dl_update_slotinfo. Ideally, this error during dlopen should be recoverable. The update order of scopes and TLS data structures is retained, although it appears to be more correct to fully initialize TLS first, and then expose symbols in the newly loaded objects via the scope update. Tested on x86_64-linux-gnu. Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* elf: Remove internal_function attributeFlorian Weimer2017-08-311-6/+0
|
* ld.so: Remove internal_function attribute from various functionsFlorian Weimer2017-08-131-3/+0
| | | | | These functions are invoked from other DSOs and should therefore use the standard calling convention.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Remove unused function _dl_tls_setupFlorian Weimer2016-12-211-33/+1
| | | | | | Commit 7a5e3d9d633c828d84a9535f26b202a6179978e7 (elf: Assume TLS is initialized in _dl_map_object_from_fd) removed the last call of _dl_tls_setup, but did not remove the function itself.
* [PR19826] fix non-LE TLS in static programsAlexandre Oliva2016-09-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | An earlier fix for TLS dropped early initialization of DTV entries for modules using static TLS, leaving it for __tls_get_addr to set them up. That worked on platforms that require the GD access model to be relaxed to LE in the main executable, but it caused a regression on platforms that allow GD in the main executable, particularly in statically-linked programs: they use a custom __tls_get_addr that does not update the DTV, which fails when the DTV early initialization is not performed. In static programs, __libc_setup_tls performs the DTV initialization for the main thread, but the DTV of other threads is set up in _dl_allocate_tls_init, so that's the fix that matters. Restoring the initialization in the remaining functions modified by this patch was just for uniformity. It's not clear that it is ever needed: even on platforms that allow GD in the main executable, the dynamically-linked version of __tls_get_addr would set up the DTV entries, even for static TLS modules, while updating the DTV counter. for ChangeLog [BZ #19826] * elf/dl-tls.c (_dl_allocate_tls_init): Restore DTV early initialization of static TLS entries. * elf/dl-reloc.c (_dl_nothread_init_static_tls): Likewise. * nptl/allocatestack.c (init_one_static_tls): Likewise.
* elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]Florian Weimer2016-08-031-36/+53
| | | | | | | | | | | | | | | | | | | Instead, call malloc and explicitly align the pointer. There is no external location to store the original (unaligned) pointer, and this commit increases the allocation size to store the pointer at a fixed location relative to the TCB pointer. The manual alignment means that some space goes unused which was previously made available for subsequent allocations. However, in the TLS_DTV_AT_TP case, the manual alignment code avoids aligning the pre-TCB to the TLS block alignment. (Even while using memalign, the allocation had some unused padding in front.) This concludes the removal of memalign calls from the TLS code, and the new tst-tls3-malloc test verifies that only core malloc routines are used.
* elf: Avoid using memalign for TLS allocations [BZ #17730]Florian Weimer2016-08-031-29/+46
| | | | | | | | | | | | Instead of a flag which indicates the pointer can be freed, dtv_t now includes the pointer which should be freed. Due to padding, the size of dtv_t does not increase. To avoid using memalign, the new allocate_dtv_entry function allocates a sufficiently large buffer so that a sub-buffer can be found in it which starts with an aligned pointer. Both the aligned and original pointers are kept, the latter for calling free later.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Fix DTV race, assert, DTV_SURPLUS Static TLS limit, and nptl_db garbageAlexandre Oliva2015-03-171-31/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for ChangeLog [BZ #17090] [BZ #17620] [BZ #17621] [BZ #17628] * NEWS: Update. * elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV entries with Static TLS too. Skip entries past the end of the allocated DTV, from Alan Modra. (tls_get_addr_tail): Update to glibc_likely/unlikely. Move Static TLS DTV entry set up from... (_dl_allocate_tls_init): ... here (fix modid assertion), ... * elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here... * nptl/allocatestack.c (init_one_static_tls): ... and here... * elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound for Static TLS. * elf/tlsdeschtab.h (map_generation): Return size_t. Check that the slot we find is associated with the given map before using its generation count. * nptl_db/db_info.c: Include ldsodefs.h. (rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs. * nptl_db/structs.def (DB_RTLD_VARIABLE): New macro. (DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise. (link_map::l_tls_offset): New struct field. (dtv_t::counter): Likewise. (rtld_global): New struct. (_rtld_global): New rtld variable. (dl_tls_dtv_slotinfo_list): New rtld global field. (dtv_slotinfo_list): New struct. (dtv_slotinfo): Likewise. * nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include. (td_lookup): Rename to... (td_mod_lookup): ... this. Use new mod parameter instead of LIBPTHREAD_SO. * nptl_db/td_thr_tlsbase.c: Include link.h. (dtv_slotinfo_list, dtv_slotinfo): New functions. (td_thr_tlsbase): Check DTV generation. Compute Static TLS addresses even if the DTV is out of date or missing them. * nptl_db/fetch-value.c (_td_locate_field): Do not refuse to index zero-length arrays. * nptl_db/thread_dbP.h: Include gnu/lib-names.h. (td_lookup): Make it a macro implemented in terms of... (td_mod_lookup): ... this declaration. * nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override. (DB_MAIN_VARIABLE): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2015-01-021-1/+1
|
* Add hidden __tls_get_addr/___tls_get_addr aliasH.J. Lu2014-12-211-0/+10
| | | | | | | | | | | | | | | | | | | | __tls_get_addr/___tls_get_addr is always defined in ld.so. There is no need to call them via PLT inside ld.so. This patch adds the hidden __tls_get_addr/___tls_get_addr aliases and calls them directly from _dl_tlsdesc_dynamic. There is no need to set up the EBX register in i386 _dl_tlsdesc_dynamic when calling the hidden ___tls_get_addr. * elf/dl-tls.c (__tls_get_addr): Provide the hidden definition if not defined. * sysdeps/i386/dl-tls.h (___tls_get_addr): Provide the hidden definition. * sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the hidden ___tls_get_addr. * sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the hidden __tls_get_addr. * sysdeps/generic/localplt.data (__tls_get_addr): Removed. * sysdeps/unix/sysv/linux/i386/localplt.data (___tls_get_addr): Likewise.
* Resize DTV if the current DTV isn't big enoughH.J. Lu2014-11-281-41/+61
| | | | | | | | | | | | | | | | | | | | | | | This patch changes _dl_allocate_tls_init to resize DTV if the current DTV isn't big enough. Tested on X86-64, x32 and ia32. [BZ #13862] * elf/dl-tls.c: Include <atomic.h>. (oom): Remove #ifdef SHARED/#endif. (_dl_static_dtv, _dl_initial_dtv): Moved before ... (_dl_resize_dtv): This. Extracted from _dl_update_slotinfo. (_dl_allocate_tls_init): Resize DTV if the current DTV isn't big enough. (_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV. * nptl/Makefile (tests): Add tst-stack4. (modules-names): Add tst-stack4mod. ($(objpfx)tst-stack4): New. (tst-stack4mod.sos): Likewise. ($(objpfx)tst-stack4.out): Likewise. ($(tst-stack4mod.sos)): Likewise. (clean): Likewise. * nptl/tst-stack4.c: New file. * nptl/tst-stack4mod.c: Likewise.
* BZ #16613: Support TLS in audit libraries.Carlos O'Donell2014-02-251-0/+28
| | | | | | | | | | | This commit fixes a bug where the dynamic loader would crash when loading audit libraries, via LD_AUDIT, where those libraries used TLS. The dynamic loader was not considering that the audit libraries would use TLS and failed to bump the TLS generation counter leaving TLS usage inconsistent after loading the audit libraries. https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
* Use glibc_likely instead __builtin_expect.Ondřej Bílka2014-02-101-8/+8
|
* Revert "Patch 3/4 of the effort to make TLS access async-signal-safe."Allan McRae2014-02-061-12/+0
| | | | This reverts commit 35e8f7ab94c910659de9d507aa0f3e1f8973d914.
* Revert "Patch 2/4 of the effort to make TLS access async-signal-safe."Allan McRae2014-02-061-18/+16
| | | | | | | | | | | | | This reverts commit 1f33d36a8a9e78c81bed59b47f260723f56bb7e6. Conflicts: elf/dl-misc.c Also reverts the follow commits that were bug fixes to new code introduced in the above commit: 063b2acbce83549df82ab30f5af573f1b9c4bd19 b627fdd58554bc36bd344dc40a8787c4b7a9cc46 e81c64bba13d2d8b2a4e53254a82cc80f27c8497
* Revert "Async-signal safe TLS."Allan McRae2014-02-061-67/+33
| | | | | | | | | This reverts commit 7f507ee17aee720fa423fa38502bc3caa0dd03d7. Conflicts: ChangeLog nptl/tst-tls7.c nptl/tst-tls7mod.c
* Async-signal safe TLS.Andrew Hunter2014-01-031-33/+67
| | | | | | | | | | | | | | | | | | | | | | ChangeLog: 2014-01-03 Andrew Hunter <ahh@google.com> * elf/dl-open.c (): New comment. * elf/dl-reloc.c (_dl_try_allocate_static_tls): Use atomic_compare_and_exchange_bool_acq (_dl_allocate_static_tls): Block signals. * elf/dl-tls.c (allocate_and_init): Return void. (_dl_update_slotinfo): Block signals, use atomic update. nptl/ChangeLog: 2014-01-03 Andrew Hunter <ahh@google.com> * nptl/Makefile (tst-tls7): New test. * nptl/tst-tls7.c: New file. * nptl/tst-tls7mod.c: New file. * nptl/allocatestack.c (init_one_static_tls): Use atomic barrier.
* Update copyright notices with scripts/update-copyrightsAllan McRae2014-01-011-1/+1
|
* Patch 2/4 of the effort to make TLS access async-signal-safe.Paul Pluzhnikov2013-12-181-16/+18
| | | | | | | | | | | | | | | | | Add a signal-safe malloc replacement. 2013-12-18 Andrew Hunter <ahh@google.com> * sysdeps/generic/ldsodefs.h (__signal_safe_memalign): New prototype. (__signal_safe_malloc, __signal_safe_free): Likewise. (__signal_safe_realloc, __signal_safe_calloc): Likewise. * elf/dl-misc.c (__signal_safe_allocator_header): New struct. (__signal_safe_memalign, __signal_safe_malloc): New function. (__signal_safe_free, __signal_safe_realloc): Likewise. (__signal_safe_calloc): Likewise. * elf/dl-tls.c (allocate_dtv, _dl_clear_dtv): Call signal-safe functions. (_dl_deallocate_tls, _dl_update_slotinfo): Likewise.
* Patch 3/4 of the effort to make TLS access async-signal-safe.Paul Pluzhnikov2013-12-181-0/+12
| | | | | | | | | | | Factor out _dl_clear_dtv. 2013-12-18 Andrew Hunter <ahh@google.com> * elf/Versions (ld): Add _dl_clear_dtv. * sysdeps/generic/ldsodefs.h (_dl_clear_dtv): New prototype. * elf/dl-tls.c (_dl_clear_dtv): New function. * nptl/allocatestack.c (get_cached_stack): Call _dl_clear_dtv.
* Update copyright notices with scripts/update-copyrights.Joseph Myers2013-01-021-1/+1
|
* Restore GL(dl_initial_dtv)H.J. Lu2012-09-061-4/+2
|
* Remove _dl_initial_dtvH.J. Lu2012-09-061-1/+8
| | | | | | | | | | * csu/libc-tls.c (static_dtv): Renamed to ... (_dl_static_dtv): This. Make it global. (_dl_initial_dtv): Removed. (__libc_setup_tls): Updated. * elf/dl-tls.c (DL_INITIAL_DTV): New macro. (_dl_deallocate_tls): Replace GL(dl_initial_dtv) with DL_INITIAL_DTV.
* Always check dtv before freeing dtv[-1]H.J. Lu2012-09-061-2/+0
|
* Replace FSF snail mail address with URLs.Paul Eggert2012-02-091-3/+2
|
* Avoid pointer type mismatch warning.Richard Henderson2012-02-091-1/+1
| | | | | | update_get_addr returns a link_map*, but the return expression was of type char*. Fix by relying on gcc's void* arithmetic extension and auto-conversion from void*.
* Optimize __get_tls_addr a bitUlrich Drepper2012-01-301-16/+28
| | | | | Rearrange code to avoid creation of a stack frame. At least on x86-64 the code for the fast path should be down to the bare minimum.
* Fix memory leak in TLS of loaded objects.Ulrich Drepper2011-04-101-4/+1
|
* * elf/dl-tls.c (__tls_get_addr): After calling _dl_update_slotinfo cvs/fedora-glibc-20081031T2102Ulrich Drepper2008-10-311-1/+4
| | | | | | | refetch dtv, as it might have changed. * elf/Makefile: Add rules to build and run tst-tls18. * elf/tst-tls18.c: New test. * elf/tst-tlsmod18a.c: New file.
* * stdlib/divmod_1.c: Use correct type for dummy variable.Ulrich Drepper2008-10-171-1/+1
| | | | * stdlib/mod_1.c: Likewise.
* (_dl_update_slotinfo): Copy all of the initial DTV.Ulrich Drepper2008-10-161-1/+1
|
* * elf/dl-tls.c (__tls_get_addr): Optimize by moving slow path inUlrich Drepper2008-05-121-43/+56
| | | | its own function. This reduces the frame setup costs and more.
* [BZ #5786]Ulrich Drepper2008-03-081-1/+0
| | | | | | | | | | | | | * elf/dl-sysdep.c: Undefine ROUND after use. * sysdeps/generic/ldsodefs.h [HAVE_DL_DISCOVER_OSVERSION] (struct rtld_global_ro): Add _dl_tls_get_addr_soft element. * elf/rtld.c (rtld_global_ro): Initialize _dl_discover_osversion. * sysdeps/unix/sysv/linux/dl-osinfo.h: Move _dl_discover_osversion to ... * sysdeps/unix/sysv/linux/dl-sysdep.c: ...here. * sysdeps/unix/sysv/linux/dl-sysdep.h: Declare _dl_discover_osversion if necessary. * sysdeps/unix/sysv/linux/sysconf.c: Handle _SC_ARG_MAX here.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-12 22:13:12 +0000