| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds BENCHSET variable to benchtests/Makefile in order to
provide the capability to run a list of subsets of benchmark tests, ie;
make bench BENCHSET="bench-pthread bench-math malloc-thread"
This helps users to benchmark specific glibc area
ChangeLog:
* benchtests/Makefile:Add BENCHSET to allow subsets of
benchmarks to be run.
* benchtests/README: Add documentation for: Running subsets of
benchmarks.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When executing bench-math the benchmark output is invalid with this
error msg:
Invalid benchmark output: 'workload-spec2006.wrf' does not match any of
the regexes: '^[_a-zA-Z0-9]*$¹ or Invalid benchmark output: Additional
properties are not allowed ('workload-spec2006.wrf' was unexpected)
The error was seen when running the test:
workload-spec2006.wrf, 'stack=1024,guard=1' and 'stack=1024,guard=2'.
The problem is that the current regex's do not accept the hyphen, dot, equal
and comma in the output.
This patch changes the regex in benchout.schema.json to accept symbols in
benchmark tests names.
ChangeLog:
* benchtests/scripts/benchout.schema.json: Fix regex to accept a
wider range of tests names.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Benchmark workload-spec2006.wrf does not produce max, min or mean
results but instead produce throughput. This is represented in
benchtests/bench-skeleton.c. This patch adjust benchout.schema.json to consider
bench.out from bench-math benchmarks as valid
ChangeLog:
* benchtests/scripts/benchout.schema.json: Add throughput as accepted
result from property and remove "max", min" and "mean" from required
properties based on benchtests/bench-skeleton.c.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
|
|
|
|
|
| |
Numbers for very small sizes (< 128B) are much noisier for non-cached
benchmarks like the walk benchmarks, so don't include them.
* benchtests/bench-memcpy-walk.c (START_SIZE): Set to 128.
* benchtests/bench-memmove-walk.c (START_SIZE): Likewise.
* benchtests/bench-memset-walk.c (START_SIZE): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make the walking benchmarks walk only backwards since copying both
ways is biased in favour of implementations that use non-temporal
stores for larger sizes; falkor is one of them. This also fixes up
bugs in computation of the result which ended up multiplying the
length with the timing result unnecessarily.
* benchtests/bench-memcpy-walk.c (do_one_test): Copy only
backwards. Fix timing computation.
* benchtests/bench-memmove-walk.c (do_one_test): Likewise.
* benchtests/bench-memset-walk.c (do_one_test): Walk backwards
on memset by N at a time. Fix timing computation.
|
|
|
|
| |
Numbers used from cos and sin inputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks both ways through a large memory area
and copies different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the simple memmove benchmark (which is only
really useful for smaller sizes) especially for larger sizes where the
likelihood of the call being done only once is pretty high.
This benchmark is different from memcpy in that it also tests
overlapping copies.
* benchtests/bench-memmove-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks backward through a large memory area
and sets different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the simple memset benchmark (which is only
really useful for smaller sizes) especially for larger sizes where the
likelihood of the call being done only once is pretty high.
* benchtests/bench-memset-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks both ways through a large memory area
and copies different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the other memcpy benchmarks, especially for
larger sizes where the likelihood of the call being done only once is
pretty high.
* benchtests/bench-memcpy-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
|
|
|
|
|
|
|
|
|
| |
exp2f and log2f benchmark traces are just copies of the existing
expf and logf traces from wrf_r.
* benchtests/Makefile: Add exp2f and log2f benchmarks.
* benchtests/exp2f-inputs: Copy of expf-inputs.
* benchtests/log2f-inputs: Copy of logf-inputs.
|
|
|
|
|
|
|
|
| |
Add a trace for logf. This is a reduced trace based on 2.8 billion
samples extracted from wrf_r.
* benchtests/Makefile: Add logf benchmark.
* benchtests/logf-inputs: Add reduced trace from wrf_r.
|
|
|
|
|
|
|
|
| |
Add a trace for expf. This is a reduced trace based on 2.4 billion
samples extracted from wrf_r.
* benchtests/Makefile: Add expf benchmark.
* benchtests/expf-inputs: Add reduced trace from wrf_r.
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds benchtests for the trunc and truncf functions. The
inputs listed are fairly arbitrary; I do not assert they are
representative of any particular application.
* benchtests/Makefile (bench-math): Add trunc and truncf.
(CFLAGS-bench-trunc.c): New variable.
(CFLAGS-bench-truncf.c): Likewise.
* benchtests/trunc-inputs: New file.
* benchtests/truncf-inputs: Likewise.
|
|
|
|
|
|
|
|
|
|
|
| |
The compare_strings.py option unconditionally generates a graph PNG
image of the input data, which can be unnecessary and slow. Put this
behind an optional flag -g.
* benchtests/scripts/compare_strings.py: New option -g.
(draw_graph): Print a message that a graph is being generated.
(process_results): Generate graph only if -g is passed.
(main): Process option -g.
|
|
|
|
|
|
|
|
|
| |
Make the column widths for the outputs fixed so that they look a
little less messy. They will still look bad with lots of IFUNCs (like
on x86) but it's still a step forward.
* benchtests/scripts/compare_strings.py (process_results):
Better spacing for output.
|
|
|
|
|
|
|
|
|
|
|
| |
Make the script more usable by adding proper command line options
along with a way to query the options. The script is capable of doing
a bunch of things right now like choosing a base for comparison,
choosing to generate graphs, etc. and they should be accessible via
command line switches.
* benchtests/scripts/compare_strings.py: Use argparse.
* benchtests/README: Document existence of compare_strings.py.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Keeping the same buffers along with copying the same size of data into
the same location means that the first routine is typically the
slowest since it has to bear the cost of fetching data into to cache.
Reallocating buffers stabilizes numbers by a bit.
* benchtests/bench-string.h (realloc_bufs): New function.
(test_init): Call it.
* benchtests/bench-memset-large.c (do_test): Likewise.
* benchtests/bench-memset.c (do_test): Likewise.
|
|
|
|
|
|
|
|
|
|
| |
Make the memset benchmarks (bench-memset and bench-memset-large) print
their output in JSON so that they can be evaluated using the
compare_strings.py script.
* benchtests/bench-memset-large.c: Print output in JSON
format.
* benchtests/bench-memset.c: Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This code page is identical to code page 850 except that X'D5'
has been changed from LI61 (dotless i) to SC20 (euro symbol).
The code points from /x01 to /x1f in the /localedata/charmaps/IBM858
file have the same mapping as those in localedata/charmaps/ANSI_X3.4-1968.
That means they disagree with with
ftp://ftp.software.ibm.com/software/globalization/gcoc/attachments/CP00858.txt
in that range.
For example, localedata/charmaps/IBM858 and localedata/charmaps/ANSI_X3.4-1968 have:
“<U0001> /x01 START OF HEADING (SOH)”
whereas CP00858.txt has:
“01 SS000000 Smiling Face”
That means that CP00858.txt is not really ASCII-compatible and to make
it ASCII-compatible we deviate fro CP00858.txt in the code points from /x01
to /x1f.
[BZ #21084]
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Add IBM858 and ibm858.c.
* iconvdata/Makefile: Add IBM858.
* iconvdata/gconv-modules: Add IBM858.
* iconvdata/ibm858.c: New file.
* iconvdata/tst-tables.sh: Add IBM858
* localedata/charmaps/IBM858: New file.
|
|
|
|
|
| |
Otherwise, this will lead to link failures due to hidden symbol
references.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch further improves math function benchmarking by adding a latency
test in addition to throughput. This enables more accurate comparisons of the
math functions. The latency test works by creating a dependency on the previous
iteration: func_res = F (func_res * zero + input[i]). The multiply by zero
avoids changing the input.
It reports reciprocal throughput and latency in nanoseconds (depending on the
timing header used) and max/min throughput in iterations per second:
"workload-spec2006.wrf": {
"reciprocal-throughput": 100,
"latency": 200,
"max-throughput": 1.0e+07,
"min-throughput": 5.0e+06
}
* benchtests/bench-skeleton.c (main): Add support for
latency benchmarking.
* benchtests/scripts/bench.py: Add support for latency benchmarking.
|
|
|
|
|
|
|
|
|
|
| |
Make the memmove benchmarks (bench-memmove and bench-memmove-large)
print their output in JSON so that they can be evaluated using the
compare_strings.py script.
* benchtests/bench-memmove-large.c: Print output in JSON
format.
* benchtests/bench-memmove.c: Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The test run is unnecessary and interferes with the benchmark. The
tests are done during make check, so they're unnecessary here.
* benchtests/bench-memccpy.c (do_one_test): Remove checks.
* benchtests/bench-memchr.c (do_one_test): Likewise.
* benchtests/bench-memcpy-large.c (do_one_test): Likewise.
* benchtests/bench-memcpy.c (do_one_test): Likewise.
* benchtests/bench-memmove-large.c (do_one_test): Likewise.
* benchtests/bench-memmove.c (do_one_test): Likewise.
* benchtests/bench-memset-large.c (do_one_test): Likewise.
* benchtests/bench-memset.c (do_one_test): Likewise.
* benchtests/bench-string.h (test_init): Remove memsets.
|
|
|
|
|
|
|
|
|
|
| |
The compare_strings.py script generates a graph for the benchmarks it
performs a comparison on and that fails if X is not available. Avoid
the error and ensure that only the graph is generated and saved as a
PNG file.
* benchtests/scripts/compare_strings.py: Avoid display error
when generating graph.
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch allows one to provide the function name using an optional
-base option to compare all other functions against. This is useful
when pitching one implementation of a string function against
alternatives. In the absence of this option, comparisons are done
against the first ifunc in the list.
* benchtests/scripts/compare_strings.py (main): Add an
optional -base option.
(process_results): New argument base_func.
|
|
|
|
|
|
|
|
|
|
| |
The hardcoded 'memcpy' name turns up in other derived tests like
mempcpy.
* benchtests/bench-memcpy.c (test_main): Use TEST_NAME instead of
hardcoding memcpy.
* benchtests/bench-memcpy-large.c (test_name): Likewise.
* benchtests/bench-memcpy-random.c (test_name): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Read the memcpy results in json and print out the results in tabular
form, in addition to generating a graph of the results to compare all
of the implementations.
The format of the output is extensible enough to allow this kind of
analysis to be done on other string functions as well.
* benchtests/scripts/benchout_strings.schema.json: New file.
* benchtests/scripts/compare_strings.py: New file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Print the benchmark output for various memcpy benchmarks in json so
that it can be predictably parsed and analyzed.
* benchtests/bench-memcpy-large.c: Include json-lib.h.
(do_one_test): Print json.
(do_test): Likewise.
(test_main): Likewise.
* benchtests/bench-memcpy-random.c: Include json-lib.h.
(do_one_test): Print json.
(do_test): Likewise.
(test_main): Likewise.
* benchtests/bench-memcpy.c: Include json-lib.h.
(do_one_test): Print json.
(do_test): Likewise.
(test_main): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enhance the json module in benchtests to print signed and unsigned
integers and string array elements.
* benchtests/json-lib.h: Include inttypes.h.
(json_attr_int, json_attr_int, json_element_string,
json_element_int, json_element_uint): New functions.
* benchtests/json-lib.c: (json_attr_int, json_attr_int,
json_element_string, json_element_int, json_element_uint): New
functions.
|
|
|
|
|
|
|
|
| |
Add a workload for powf. This is a reduced trace based on 2.3 billion
samples extracted from wrf. The distribution of values, in particular
frequency of commonly used operands is the same as in the full trace.
* benchtests/powf-inputs: Add reduced trace from wrf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Improve support for math function benchmarking. This patch adds
a feature that allows accurate benchmarking of traces extracted
from real workloads. This is done by iterating over all samples
rather than repeating each sample many times (which completely
ignores branch prediction and cache effects). A trace can be
added to existing math function inputs via
"## name: workload-<name>", followed by the trace.
* benchtests/README: Describe workload feature.
* benchtests/bench-skeleton.c (main): Add support for
benchmarking traces from workloads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add powf() bench test with input which covers these cases:
- positive base to positive exponent
- exponent 0
- negative base to even exponent
- exponent 1
- exponent -1
- squared
- squareroot
- 1 to negative exponent
- -1 to negative exponent
- base 0
- -1 to even exponent
- small base
- small exponent
* benchtests/Makefile (bench-math): Add powf.
* benchtests/powf-inputs: New file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current allocate_stack logic for create stacks is to first mmap all
the required memory with the desirable memory and then mprotect the
guard area with PROT_NONE if required. Although it works as expected,
it pessimizes the allocation because it requires the kernel to actually
increase commit charge (it counts against the available physical/swap
memory available for the system).
The only issue is to actually check this change since side-effects are
really Linux specific and to actually account them it would require a
kernel specific tests to parse the system wide information. On the kernel
I checked /proc/self/statm does not show any meaningful difference for
vmm and/or rss before and after thread creation. I could only see
really meaningful information checking on system wide /proc/meminfo
between thread creation: MemFree, MemAvailable, and Committed_AS shows
large difference without the patch. I think trying to use these
kind of information on a testcase is fragile.
The BZ#18988 reports shows that the commit pages are easily seen with
mlockall (MCL_FUTURE) (with lock all pages that become mapped in the
process) however a more straighfoward testcase shows that pthread_create
could be faster using this patch:
--
static const int inner_count = 256;
static const int outer_count = 128;
static
void *thread1(void *arg)
{
return NULL;
}
static
void *sleeper(void *arg)
{
pthread_t ts[inner_count];
for (int i = 0; i < inner_count; i++)
pthread_create (&ts[i], &a, thread1, NULL);
for (int i = 0; i < inner_count; i++)
pthread_join (ts[i], NULL);
return NULL;
}
int main(void)
{
pthread_attr_init(&a);
pthread_attr_setguardsize(&a, 1<<20);
pthread_attr_setstacksize(&a, 1134592);
pthread_t ts[outer_count];
for (int i = 0; i < outer_count; i++)
pthread_create(&ts[i], &a, sleeper, NULL);
for (int i = 0; i < outer_count; i++)
pthread_join(ts[i], NULL);
assert(r == 0);
}
return 0;
}
--
On x86_64 (4.4.0-45-generic, gcc 5.4.0) running the small benchtests
I see:
$ time ./test
real 0m3.647s
user 0m0.080s
sys 0m11.836s
While with the patch I see:
$ time ./test
real 0m0.696s
user 0m0.040s
sys 0m1.152s
So I added a pthread_create benchtest (thread_create) which check
the thread creation latency. As for the simple benchtests, I saw
improvements in thread creation on all architectures I tested the
change.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, sparc64-linux-gnu,
and sparcv9-linux-gnu.
[BZ #18988]
* benchtests/thread_create-inputs: New file.
* benchtests/thread_create-source.c: Likewise.
* support/xpthread_attr_setguardsize.c: Likewise.
* support/Makefile (libsupport-routines): Add
xpthread_attr_setguardsize object.
* support/xthread.h: Add xpthread_attr_setguardsize prototype.
* benchtests/Makefile (bench-pthread): Add thread_create.
* nptl/allocatestack.c (allocate_stack): Call mmap with PROT_NONE and
then mprotect the required area.
|
|
|
|
|
|
|
|
|
|
|
| |
bench-memchr.c is shared with bench-memrchr.c. This patch adds some
tests for positions close to the beginning for memrchr, which are
equivalent to positions close to the end for memchr.
* benchtests/bench-memchr.c (do_test): Print out both length
and position.
(test_main): Also test the position close to the beginning for
memrchr.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files. extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module. Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.
* extra-modules.mk: Delete file.
* cppflags-iterator.mk: Rename to ...
* libof-iterator.mk: ...this. Adjust comments.
* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
Use libof-iterator.mk instead of cppflags-iterator.mk or
extra-modules.mk.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
|
|
|
|
|
| |
* benchtests/bench-memcpy-random.c (TEST_NAME): Change to memcpy.
(IMPL) Call with 1 instead of 0 as argument.
|
|
|
|
| |
git-add and commit the benchmark that Wilco posted on the list.
|
|
|
|
|
|
|
|
|
|
| |
of the size and alignment is based on a trace of SPEC2006. Instead of
repeating the same copy over and over again like the existing tests, it times
several thousand different copies to more accurately estimate the overhead of
branch prediction.
* benchtests/Makefile (string-benchset): Add memcpy-random.
* benchtests/bench-memcpy-random.c: New file.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a configure check that looks for python3 and python in that order
since we had agreed in the past to prefer python3 over python in all
our code. The patch also adjusts invocations through the various
Makefiles to use the set variable.
* configure.ac: Check for python3 or python.
* configure: Regenerated.
* config.make.in (PYTHON): New variable.
* benchtests/Makefile: Don't define PYTHON.
(bench): Define target only if PYTHON was defined.
* Rules: Don't define PYTHON.
Define pretty printer targets only if PYTHON was defined.
(tests-printers): Add to tests-unsupported if PYTHON is not
found.
(python-flags, python-invoke): Remove.
(tests-printers-out): Use PYTHON instead of python-invoke.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently strsep calls strpbrk is is now a veneer to strcspn. Calling
strcspn directly is faster. Since it handles a delimiter string of size
1 as a special case, this is not needed in strsep itself. Although this
means there is a slightly higher overhead if the delimiter size is 1,
all other cases are slightly faster. The overall performance gain is 5-10%
on AArch64.
The string/bits/string2.h header contains optimizations for constant
delimiters of size 1-3. Benchmarking these showed similar performance for
size 1 (since in all cases strchr/strchrnul is used), while size 2 and 3
can give up to 2x speedup for small input strings. However if these cases
are common it seems much better to add this optimization to strcspn.
So move these header optimizations to string-inlines.c.
Improve the strsep benchmark so that it actually benchmarks something.
The current version contains a delimiter character at every position in the
input string, so there is very little work to do, and the extremely inefficent
simple_strsep implementation appears fastest in every case. The new version
has either no match in the input for the fail case and a match halfway in the
input for the success case. The input is then restored so that each iteration
does exactly the same amount of work. Reduce the number of testcases since
simple_strsep takes a lot of time now.
* benchtests/bench-strsep.c (oldstrsep): Add old implementation.
(do_one_test) Restore original string so iteration works.
* string/string-inlines.c (do_test): Create better input strings.
(test_main) Reduce number of testruns.
* string/string-inlines.c (__old_strsep_1c): New function.
(__old_strsep_2c): Likewise.
(__old_strsep_3c): Likewise.
* string/strsep.c (__strsep): Remove case of small delim string.
Call strcspn directly rather than strpbrk.
* string/bits/string2.h (__strsep): Remove define.
(__strsep_1c): Remove.
(__strsep_2c): Remove.
(__strsep_3c): Remove.
(strsep): Remove.
* sysdeps/unix/sysv/linux/internal_statvfs.c
(__statvfs_getflags): Rename to __strsep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds fmaxf and fminf benchtests. It is based on
math/s_fmax_template.c implementation which checks for basically four
different classes:
1. if x is greater or equal than y.
2. if x is less than y.
3. if x or y is signaling.
4. if y is nan.
Cases 1 and 2 are used for default input number (by mixing normal double
numbers and infinity), while case 3 and 4 are used each for on for a
benchmark class.
Checked on x86_64-linux-gnu and powerpc64-linux-gnu.
* benchtests/Makefile (bench-math): Add fminf and fmaxf.
(CFLAGS-bench-fmaxf.c): New rule.
(CFLAGS-bench-fminf.c): Likewise.
* benchtests/fmaxf-inputs: New file.
* benchtests/fminf-inputs: Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds fmax and fmin benchtests. It is based math/s_fmax_template.c
implementation which checks for basically four different classes:
1. if x is greater or equal than y.
2. if x is less than y.
3. if x or y is signaling.
4. if y is nan.
Cases 1 and 2 are used for default input number (by mixing normal double
numbers and infinity), while case 3 and 4 are used each for on for a
benchmark class.
Checked on x86_64-linux-gnu and powerpc64-linux-gnu.
* benchtests/Makefile (bench-math): Add fmin and fmax.
(CFLAGS-bench-fmax.c): New rule.
(CFLAGS-bench-fmin.c): New rule.
* benchtests/fmax-inputs: New file.
* benchtests/fmin-inputs: Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch basically replaces the test-skeleton.c inclusion by
support/test-driver.c and also minor adjustments in bench-string.h.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
* benchtests/bench-string.h (TEST_FUNCTION): Use name without
parenthesis.
(CMDLINE_PROCESS): Define using function instead of macro.
* benchtests/bench-memccpy.c: Include <support/test-driver.c> instead
of test-skeleton.
* benchtests/bench-memchr.c: Likewise.
* benchtests/bench-memcmp.c: Likewise.
* benchtests/bench-memcpy-large.c: Likewise.
* benchtests/bench-memcpy.c: Likewise.
* benchtests/bench-memmem.c: Likewise.
* benchtests/bench-memmove-large.c: Likewise.
* benchtests/bench-memmove.c: Likewise.
* benchtests/bench-memset-large.c: Likewise.
* benchtests/bench-memset.c: Likewise.
* benchtests/bench-rawmemchr.c: Likewise.
* benchtests/bench-strcasecmp.c: Likewise.
* benchtests/bench-strcasestr.c: Likewise.
* benchtests/bench-strcat.c: Likewise.
* benchtests/bench-strchr.c: Likewise.
* benchtests/bench-strcmp.c: Likewise.
* benchtests/bench-strcpy.c: Likewise.
* benchtests/bench-strcpy_chk.c: Likewise.
* benchtests/bench-strlen.c: Likewise.
* benchtests/bench-strncasecmp.c: Likewise.
* benchtests/bench-strncmp.c: Likewise.
* benchtests/bench-strncpy.c: Likewise.
* benchtests/bench-strnlen.c: Likewise.
* benchtests/bench-strpbrk.c: Likewise.
* benchtests/bench-strrchr.c: Likewise.
* benchtests/bench-strsep.c: Likewise.
* benchtests/bench-strspn.c: Likewise.
* benchtests/bench-strstr.c: Likewise.
* benchtests/bench-strtok.c: Likewise.
|
|
|
|
|
|
|
|
| |
Benchsets in benchtests use test-skeleton, so they too need to be
linked against the new libsupport DSO.
* benchtests/Makefile (binaries-benchset): Depend on libsupport
DSO.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
calls strcspn, call strcspn directly so we get the end of the token without
an extra call to rawmemchr. Also avoid an unnecessary call to strcspn after
the last token by adding an early exit for an empty string. Change strtok
to tailcall strtok_r to avoid unnecessary code duplication.
Remove the special header optimization for strtok_r of a 1-character
constant string - both strspn and strcspn contain optimizations for this
case. Benchmarking this showed similar performance in the worst case,
but up to 5.5x better performance in the "found" case for large inputs.
* benchtests/bench-strtok.c (oldstrtok): Add old implementation.
* string/strtok.c (strtok): Change to tailcall __strtok_r.
* string/strtok_r.c (__strtok_r): Optimize for performance.
* string/string-inlines.c (__old_strtok_r_1c): New function.
* string/bits/string2.h (__strtok_r): Move to string-inlines.c.
|
|
|
|
|
|
|
|
|
|
|
| |
This patch makes the sqrt benchmark use -fno-builtin, as already done
for benchmarks of ffs and ffsll, so that it actually benchmarks the
glibc function as (presumably) intended even in the presence of the
compiler inlining sqrt.
Tested for x86_64 and also used for benchmarking my ARM sqrt patch.
* benchtests/Makefile (CFLAGS-bench-sqrt.c): New variable.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Clear the destination buffer updated by the previous run in bench-memcpy.c
and test-memcpy.c to catch the error when the following implementations do
not copy anything.
[BZ #19907]
* benchtests/bench-memcpy.c (do_one_test): Clear the destination
buffer updated by the previous run.
* string/test-memcpy.c (do_one_test): Likewise.
* benchtests/bench-memmove.c (do_one_test): Add a comment.
* string/test-memmove.c (do_one_test): Likewise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds full support for cross-building benchmarks. Some
benchmarks like those that need locales to be generated cannot be
built and are hence skipped for cross builds.
Tested by cross building for aarch64 on x86_64 and then running the
generated benchmark on aarch64.
* benchtests/Makefile (wcsmbs-benchset): Include only for
native builds and runs.
(LOCALES): Likewise.
(bench-build): Build timing-type here instead of the bench
target. Generate locale only for native builds.
* benchtests/README: Add note for cross-building.
|
|
|
|
|
| |
The bench-clean target would leave behind json-lib.o. Fix up to clean
up all extra-objs registered in benchtests.
|